Search Results

Search found 1209 results on 49 pages for 'jack johnstone'.

Page 47/49 | < Previous Page | 43 44 45 46 47 48 49  | Next Page >

  • Rails - Logic for finding info from a :has_many :through needed!

    - by Jty.tan
    I have 3 relevant tables. User, Orders, and Viewables The idea is that each User has got many Orders, but at the same time, each User can View specific other Orders that belong to other Users. So Viewables has the attributes of user_id and order_id. Orders has a :has_many :Users, :through => :viewables Is it possible to do a find through an Order's view? So something like @viewable_orders = Orders.find(:all, :conditions = ["Viewable.user_id=?",1]) To get a list of Orders which are viewable by user_id=1. (This doesn't work, else I won't be asking. :( ) The idea being that I can do something like a sidebar where the current user (the logged-in one) can view a list of other people's orders that he can view. For example Three other Users who have some Orders that he can view should be eventually displayed like this: Jack (2) Basic Order (registry_id: 1) New Order (registry_id: 29) Amy (4) Short Order (registry_id: 12) Jill (5) Hardware Order (14) Pink Order (17) Software Order (76) (The number in brackets are the respective user_id or registry_id) So to find the list of all of the orders that the current user can find (assuming user_id of the current user is 1), would be found by doing @viewable_orders = Viewable.find(:all, :conditions => ["user_id=?", 1]) And that would give me the collection of the above 6 registries. Now, the easiest way to do this, is for me to just have a list of + Jill's Hardware Order + Jill's Pink Order + Amy's Short Order + etc But that gets ugly for long lists. Thanks!

    Read the article

  • ASP.NET RadioButton messing with the name (groupname)

    - by Hojou
    I got a templated control (a repeater) listing some text and other markup. Each item has a radiobutton associated with it, making it possible for the user to select ONE of the items created by the repeater. The repeater writes the radiobutton setting its id and name generated with the default asp.net naming convention making each radiobutton a full 'group'. This means all radiobuttons are independant on each other, which again unfortunately means i can select all radiobuttons at the same time. The radiobutton has the clever attribute 'groupname' used to set a common name so they get grouped together and thus should be dependant (so i can only select one at a time). The problem is - this doesn't work - the repeater makes sure the id and thus the name (which controls the grouping) are different. Since i use a repeater (could have been a listview or any other templated databound control) i can't use the RadioButtonList. So where does that leave me? I know i've had this problem before and solved it. I know almost every asp.net programmer must have had it too, so why can't i google and find a solid solution to the problem? I came across solutions to enforce the grouping by javascript (ugly!) or even to handle the radiobuttons as non-server controls, forcing me to do a Request.Form[name] to read the status. I also tried experimenting with overriding the name attribute on the PreRender event - unfortunately the owning page and masterpage again overrides this name to reflect the full id/name so i end up with the same wrong result. If you have no better solution than i posted, you are still very welcome to post your thoughts - atleast i'll know that my friend 'jack' is right about how messed up 'asp.net' is sometimes ;)

    Read the article

  • Python: Networked IDLE?

    - by Rosarch
    Is there any existing web app that lets multiple users work with an interactive IDLE type session at once? Something like: IDLE 2.6.4 Morgan: >>> letters = list("abcdefg") Morgan: >>> # now, how would you iterate over letters? Jack: >>> for char in letters: print "char %s" % char char a char b char c char d char e char f char g Morgan: >>> # nice nice If not, I would like to create one. Is there some module I can use that simulates an interactive session? I'd want an interface like this: def class InteractiveSession(): ''' An interactive Python session ''' def putLine(line): ''' Evaluates line ''' pass def outputLines(): ''' A list of all lines that have been output by the session ''' pass def currentVars(): ''' A dictionary of currently defined variables and their values ''' pass (Although that last function would be more of an extra feature.) To formulate my problem another way: I'd like to create a new front end for IDLE. How can I do this?

    Read the article

  • Getting Started with Ruby & Ruby on Rails

    - by JakeTheSnake
    Some background: I'm a jack-of-all traits, one of which is programming. I learned VB6 through Excel and PHP for creating websites and so far it's worked out just fine for me. I'm not CS major or even mathematically inclined - logic is what interests me. Current status: I'm willing to learn new and more powerful languages; my first foray into such a route is learning Ruby. I went to the main Ruby website and did the interactive intro. (by the way, I'm currently getting redirected to google.com when I try the link...it's happening to other websites as well...is my computer infected?) I liked what I learned and wanted to get started using Ruby to create websites. I downloaded InstantRails and installed it; everything so far has been fine - the program starts up just fine, and I can test some Ruby code in the console. However my troubles begin when I try and view a web page with Ruby code present. Lastly, my problem: As in PHP, I can browse to the .php file directly and through using PHP tags and some simple 'echo' statements I can be on my way in making dynamic web pages. However with the InstantRails app working, accessing a .rb or .rhtml page doesn't produce similar results. I made a simple text file named 'test.rb' and put basic HTML tags in there (html, head, body) and the Ruby tags <%= and % with some ruby code inside. The web page actually shows the tags and the code - as if it's all just plain HTML. I take it Ruby isn't parsing the page before it is displayed to the user, but this is where my lack of understanding of the Ruby environment stops me short. Where do I go from here?

    Read the article

  • Alternate widgets and logic for ManyToManyField with Django forms

    - by Jaearess
    In my Django project, I have a simple ticket system. When creating a ticket, certain users have the ability to assign the ticket to other users, and to email the ticket to other users as well (this is used as an FYI for those users, so they're aware of the ticket, even though it's not assigned to them.) At the moment, the form for adding a ticket is simply the default Django form, with the "assigned_to" and "email_to" fields being ManyToManyFields, and therefore displayed as MultipleSelect widgets, each with a list of all users. Due to the relatively large number of users, and general awkwardness of the MultipleSelect widget, and alternate layout is now required. The desired layout is a pair of simple Select widgets side-by-side. The first has the option of "Assign to" or "Email to" and the second is a list of the users. Essentially, like this: [Assign to] [John Doe] [Email to] [Jane Roe] [Jack Smith], etc. Of course, since an arbitrary number of users can be assigned or emailed a ticket, there's a simple button that runs some Javascript to add another set of widgets, to allow the user to assign and email as many people as they need to. So far all of that is fairly simple and straight forward. However, the problem I have is using this widget setup/logic setup with Django forms. Instead of lists of users to assign to and email, instead we're getting back pairs of information, one a user and the other which list that user should be placed in. What I'm looking for, but have yet to find, is a way to offload the translation between how the user uses the form, and how Django understands the model to the form itself, so I don't have to manually do the processing of the data before passing it to the form in each place this form is used. Additionally, there's a review screen with the option to go back and change the form before submitting it, so a way to have the form translate both to and from this format would be extremely helpful.

    Read the article

  • MySQL: Request to select the last 10 send/received messages to/by different users

    - by Yako malin
    I want to select the 10 last messages you received OR you sent TO different users. For example the results must be shown like that: 1. John1 - last message received 04/17/10 3:12 2. Thomy - last message sent 04/16/10 1:26 3. Pamela - last message received 04/12/10 3:51 4. Freddy - last message received 03/28/10 9:00 5. Jack - last message sent 03/20/10 4:53 6. Tom - last message received 02/01/10 7:41 ..... Table looks like: CREATE TABLE `messages` ( `id` int(11) NOT NULL AUTO_INCREMENT, `time` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP, `sender` int(11) DEFAULT NULL, `receiver` int(11) DEFAULT NULL, `content` text ) I think Facebook (and the iPhone) use this solution. When you go to your mail box, you have the last messages received/sent grouped by Users (friends). So I will take an example. If I have theses messages (THEY ARE ORDERED YET): **Mike** **Tom** **Pam** Mike Mike **John** John Pam **Steve** **Bobby** Steve Steve Bobby Only Message with ** should be returned because they are the LAST messages I sent/received By User. In fact I want the last message of EACH discussion. What is the solution?

    Read the article

  • error on connecting to the server : socket io is not defined

    - by max
    i know there's been couple of question about the same problem , i've already check them . i have very simple node.js chat app i have a server running on 8000 port and it works fine my client pages are html , they are running on apache and i'm using socket.io to connect them to the server and it works fine on the local host but when i upload the app on the server i keep on getting this error in the firebug io is not defined var socket = io.connect('http://atenak.com:8000/'); or sometimes it doesn't show that but when i try to broadcast message from cliend i get this error : socket is undefined socket.emit('msg', { data: msg , user:'max' }); the only difference is i've changed the localhost with atenak.com ! here is my html code var socket = io.connect('http://atenak.com:8000/'); var user = 'jack'; socket.on('newmsg', function (data) { if(data.user == user ) { $('#container').html(data.data); } }); function brodcast(){ var msg = $('#fild').val(); socket.emit('msg', { data: msg , user:'max' }); } </script> </head> <body> <div id="container"> </div> <input id="fild" type="text"> <input name="" type="button" onClick="brodcast();"> </body> i have included the sockt.io.js and server is running ok which means socket.io is installed on the server here is the live page http://atenak.com/client.html

    Read the article

  • "rsAccessDenied" error for SSRS 2008

    - by JackLocke
    Hi All, I have been trying to access SSRS Web Service URL hxxp://myServer:80/ReportServer (from Reporting Service Configuration Manager), but my IE always shows "rsAccessDenied" message saying that my account doesn't have privilage required to view. Here are my system specs. Its my laptop with Windows 7 x64, and SQL Server 2008 with SP1 and I am using Mixed Mode Authentication with My account as SysAdmin privilages and this is what I have been trying / tried ... (ofcourse with restarting the service everytime I make any change in configuration), I changed service account from Reporting Service Configuration Manager to make it use My account but nothing happend. I tried running my IE as admin, by RUN AS ADMIN but still same message. Then I read somewhere I have to delete/recreate my encryption keys as well, so I tried again with that, then it was asking me to enter ID/PWD to access server here I am totally blank because it was not accepting my account credentials !!!. Weird thing is I can see my existing reports if I follow this URL hxxp://myServer:80/Reports , for which My guess is solely used to view reports. I have read post here about kind of same problem, but it seems that OP just left forum after asking question... Also, MSDN does have these helps hxxp://msdn.microsoft.com/en-us/library/ms156034.aspx hxxp://msdn.microsoft.com/en-us/library/bb630430.aspx but both of this didn't workout for me. I will really appriciate it if any one can help me out. Jack p.s. I was not allowed to post more than 1 URL because of my "reputation" so I had to change the string a bit. Please replace hxxp wih http in URLs.

    Read the article

  • Accepts Nested Attributes For - edit form displays incorrect number of items ( + !map:ActiveSupport:

    - by Brightbyte8
    Hi, I have a teacher profile model which has many subjects (separate model). I want to add subjects to the profile on the same form for creating/editing a profile. I'm using accepts_nested_attributes for and this works fine for creation. However on the edit page I am getting a very strange error - instead of seeing 3 subjects (I added three at create and a look into the console confirms this), I see 12 subjects(!). #Profile model class Profile < ActiveRecord::Base has_many :subjects accepts_nested_attributes_for :subjects end #Subject Model class Subject < ActiveRecord::Base belongs_to :profile end #Profile Controller (only showing deviations from normal RESTFUL setup) def new @profile = Profile.new 3.times do @profile.subjects.build end end #Here's 1 of three parts of the subject output of = debug @profile errors: !ruby/object:ActiveRecord::Errors base: *id004 errors: !map:ActiveSupport::OrderedHash {} subjects: - &id001 !ruby/object:Subject attributes: exam: Either name: "7" created_at: 2010-04-15 10:38:13 updated_at: 2010-04-15 10:38:13 level: Either id: "31" profile_id: "3" attributes_cache: {} # Note that 3 of these attributes are displayed despite me seeing 12 subjects on screen Other info in case it's relevant. Rails: 2.3.5 Ruby 1.8.7 p149 HAML I've never had so much difficulty with a bug before - I've already lost about 8 hours to it. Would really appreciate any help! Thanks to any courageous takers Jack

    Read the article

  • Button inside of anchor link works in Firefox but not in Internet Explorer?

    - by Jason
    Everything else in my site seems to be compatible with all browsers except for my links. They appear on the page, but they do not work. My code for the links are as follows- <td bgcolor="#ffffff" height="370" valign="top" width="165"> <p><a href="sc3.html"><button style="width:120;height:25">Super Chem #3</button></a> <a href="91hollywood.html"><button style="width:120;height:25">91 Hollywood</button></a> <a href="sbubba.html"><button style="width:120;height:25">Super Bubba</button></a> <a href="afgoohash.html"><button style="width:120;height:25">Afgoo Hash</button></a> <a href="superjack.html"><button style="width:120;height:25">Super Jack</button></a> <a href="sog.html"><button style="width:120;height:25">Sugar OG</button></a> <a href="91pk91.html"><button style="width:120;height:25">91 x PK</button></a> <a href="jedi1.html"><button style="width:120;height:25">Jedi</button></a></p> <p>&nbsp;</p> <a href="http://indynile99.blogspot.com"><button style="width:120;height:25">Blog</button></a> <p>&nbsp;</p> </td> THANKS for the help!

    Read the article

  • UI - How I can make users effectively read what my program says?

    - by Magnetic_dud
    I have a simple form that searches through the 2000+ issues of a 3rd party webcomic. (Easy, it's like xkcd: http://url/number That form is as easy as possible, is like this: What number do you want? User writes a number, clicks ok, and goes on the 3rd party website on a new tab Then, my form asks a question: "Did you find that issue memorable? Enter the name here, and we will add it to the "best issues" in home page" When the user will write the name of the issue, it is added to the database (pending moderation by me) So, I supposed this design is the easiest and convenient that users can find. Unfortunately, NONE of the users (maybe a 2% behaved correctly) will actually read what I asked. Some of the issues are offline, and gives a 404. On that issues users will write in the textbox a completely wrong title, and correctly capitalized! It's like if i would name http://xkcd.com/627/ as "The Great Adventures of Jack Smith" Users are from around all over the country, with different browsers, and have a different cookie. I cannot believe that my users will not read what I ask, it is a WHITE PAGE with a button that disappears when clicked and a textbox.... easier than that??? Maybe i should put a checkbox with "I acknowledge that this form is for submitting memorable issues, not for fun"? Oh, who will read that? Or maybe i could enable the textbox only if the user has effectively clicked the link?

    Read the article

  • jquery how to access the an xml node by index?

    - by DS
    Hi, say I've an xml returned from server like this: <persons> <person> <firstname>Jon</firstname> </person> <person> <firstname>Jack</firstname> </person> <person> <firstname>James</firstname> </person> </persons> If I want to access the 3rd firstname node (passed dynamically and stored in i, assumed to be 3 here), how do I do that? My weird attempt follows: var i=3; $(xml).find('firstname').each(function(idx){ if (idx==i) alert($(this).text()); }); It does fetch me the right content... but it just feels wrong to me especially the looping part. Basically I'm looping through the whole tree using .each()! Is there any better approach than this? Something that'd take me to the nth node directly like: alert( $(xml).find('firstname')[idx].text() ); // where idx=n I'm new to jquery so please excuse my jquery coding approach.

    Read the article

  • Unusual "static" method declaration

    - by Jason
    public class Card { public enum Rank { DEUCE, THREE, FOUR, FIVE, SIX, SEVEN, EIGHT, NINE, TEN, JACK, QUEEN, KING, ACE } public enum Suit { CLUBS, DIAMONDS, HEARTS, SPADES } private final Rank rank; private final Suit suit; private Card(Rank rank, Suit suit) { this.rank = rank; this.suit = suit; } public Rank rank() { return rank; } public Suit suit() { return suit; } public String toString() { return rank + " of " + suit; } private static final List<Card> protoDeck = new ArrayList<Card>(); // Initialize prototype deck **static** { for (Suit suit : Suit.values()) for (Rank rank : Rank.values()) protoDeck.add(new Card(rank, suit)); } public static ArrayList<Card> newDeck() { return new ArrayList<Card>(protoDeck); // Return copy of prototype deck } } I have a quick question. The code block that starts right after the static keyword declaration, what type of method is that ? I haven't ever seen that before. If anyone could enlighten me, that would be greatly appreciated. Thanks.

    Read the article

  • Random Loss of precision in Python ReadLine()

    - by jackyouldon
    Hi all, We have a process which takes a very large csv (1.6GB) and breaks it down into pieces (in this case 3). This runs nightly and normally doesn't give us any problems. When it ran last night, however, the first of the output files had lost precision on the numeric fields in the data. The active ingredient in the script are the lines: while lineCounter <= chunk: oOutFile.write(oInFile.readline()) lineCounter = lineCounter + 1 and the normal output might be something like StringField1; StringField2; StringField3; StringField4; 1000000; StringField5; 0.000054454 etc. On this one occasion and in this one output file the numeric fields were all output with 6 zeros at the end i.e. StringField1; StringField2; StringField3; StringField4; 1000000.000000; StringField5; 0.000000 We are using Python v2.6 (and don't want to upgrade unless we really have to) but we can't afford to lose this data. Does anyone have any idea why this might have happened? If the readline is doing some kind of implicit conversion is there a way to do a binary read, because we really just want this data to pass through untouched? It is very wierd to us that this only affected one of the output files generated by the same script, and when it was rerun the output was as expected. thanks Jack

    Read the article

  • How to make the constructor for the following exercise in c++?

    - by user40630
    This is the exercise I?m trying to solve. It's from C++, How to program book from Deitel and it's my homework. (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. The problem I'm facing is that I don't know exactly how to make the constructor for the second class. See description commented in the code bellow. #include <iostream> #include <vector> using namespace std; /* * */ //Class card. No problems here. class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /*The problem begins here. This class should create(when and object for it is created) a copy of the vector deck, right? But how exactly are these vector cards be initialized? I'll explain better in the constructor definition bellow.*/ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //This is where I'm stuck. I can't figure out how to set each of the 52 cards of the vector deck to have a specific suit and face every one of them, by using only the constructor of the Card class. //What you see bellow was one of my attempts to solve this problem but I blocked pretty soon in the middle of it. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

    Read the article

  • Give a session on C++ AMP – here is how

    - by Daniel Moth
    Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Surface V2.0

    - by Dennis Vroegop
    It’s been quiet around here. And the reason for that is that it’s been quiet around Surface for a while. Now, a lot of people assume that when a product team isn’t making too much noise that must mean they stopped working on their product. Remember the PDC keynote in 2010? Just because they didn’t mention WPF there a lot of people had the idea that WPF was dead and abandoned for Silverlight. Of course, this couldn’t be farther from the truth. The same applies to Surface. While we didn’t hear much from the team in Redmond they were busy putting together the next version of the platform. And at the CES in January the world saw what they have been up to all along: Surface V2.0 as it’s commonly known. Of course, the product is still in development. It’s not here yet, we can’t buy one yet. However, more and more information comes available and I think this is a good time to share with you what it’s all about! The biggest change from an organizational point of view is that Microsoft decided to stop producing the hardware themselves. Instead, they have formed a partnership with Samsung who will manufacture the devices. This means that you as a buyer get the benefits of a large, worldwide supplier with all the services they can offer. Not that Microsoft didn’t do that before but since Surface wasn’t a ‘big’ product it was sometimes hard to get to the right people. The new device is officially called the “Samsung SUR 40 for Microsoft Surface” which is quite a mouthful. The software that runs the device is of course still coming from Microsoft. Let’s dive into the technical specs (note: all of this is preliminary, it’s still in the Alpha phase!): Audio out HDMI / StereoRCA / SPDIF / 2 times 3.5mm audio out jack Brightness 300 CD/m2 Communications 1GB Ethernet/802.11/Bluetooth Contrast Ratio 1:1000 CPU AMD Athlon X2 245e 2.9Ghz Dual Core Display Resolution Full HD 1080p 1920x1080 / 16:9 aspect ratio GPU AMD Radeon HD 6750 1GB GDDRS HDD 320 GB / 7200 RPM HDMI In / HDMI out Yes I/O Ports 4 USB, SD Card reader Operation System Embedded Windows 7 Professional 64 bits Panel Size 40” diagonal Protection Glass Gorilla Glass RAM 4 GB DD3 Weight / with standard legs 70.0 Kg / 154 lbs Weight / standalone 39.5 Kg / 87 lbs Height (without legs) 4 inch Contact points recognized > 50 Cool Factor Extremely   Ok, the last point is not official, but I do think it needs to be there. Let’s talk software. As noted, it runs Windows 7 Professional 64 bit, which means you can run Visual Studio 2010 on it. The software is going to be developed in WPF4.0 with the additional Surface SDK 2.0. It will contain all the things you’ve seen before plus some extra’s. They have taken some steps to align it more with the Surface Toolkit which you can download today, so if you do things right your software should be portable between a WPF4.0 Windows 7 Multi-touch app and the Surface v2 environment. It still uses infrared to detect contacts, so in that respect nothing much has changed conceptually. We still can differentiate between a finger, a tag or a blob. Of course, since the new platform has a much higher resolution (compared to the 1024x768 of the first version) you might need to look at your code again. I’ve seen a lot of applications on Surface that assume the old resolution and moving that to V2 is going to be some work. To be honest: as I am under NDA I cannot disclose much about the new software besides what I have told you here, but trust me: it’s going to blow people away. Now, the biggest question for me is: when can I get one? Until we can, have a look here: Tags van Technorati: surface,samsung,WPF

    Read the article

  • Integrated webcam in lenovo t410 not working with 12.04

    - by kristianp
    I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

    Read the article

  • ArchBeat Link-o-Rama for 2012-06-26

    - by Bob Rhubart
    Software Architecture for High Availability in the Cloud | Brian Jimerson Brian Jimerson looks at the paradigm shifts from machine-based architectures to cloud-based architectures when designing fault tolerance, and how enterprise applications need to be engineered to ensure the highest level of availability in the cloud. SOA, Cloud & Service Technology Symposium 2012 London - Special Oracle Discount Registration is now open for one of the premier SOA, Cloud, and Service Technology events. Once again, the Oracle community is well-represented in the session schedule. And now you can save on registration with a special Oracle discount code. Progress 4GL and DB to Oracle and cloud | Tom Laszewski "Getting from client/server based 4GLs and databases where the 4GL is tightly linked to the database to Oracle and the cloud is not easy," says cloud migration expert Tom Laszewski. "The least risky and expensive option...is to use the Progress OpenEdge DataServer for Oracle." Embrace 'big data' now or fall behind the competition, analyst warns | TechTarget TechTarget's Mark Brunelli's story says, in essence, that Big Data is not your fathers Business Intelligence. Calculating the Size (in Bytes and MB) of a Oracle Coherence Cache | Ricardo Ferreira Ferreira illustrates a programmatic way to use the Oracle Coherence API to calculate the total size of a specific cache that resides in the data grid. WebCenter Portal Tutorial Part 7: Integrating Discussions and Link service | Yannick Ongena The latest chapter in Oracle ACE Yannick Ongena's ongoing series. How to Setup JDeveloper workspace for ADF Fusion Applications to run Business Component Tester? | Jack Desai Helpful technical tips from yet another member of the Oracle Fusion Middleware Architecture Team. Big Data for the Enterprise; Software Architecture for High Availability in the Cloud; Why Cloud Computing is a Paradigm Shift - And Why It Isn't This week on the OTN Solution Architect Homepage, along with an updated events list and this weeks list of selected community blog posts. Worst Practices for Big Data | Dain Hansen Dain Hansen shares some insight on what NOT to do if you want to captialize on Big Data. Free Virtual Developer Day - Oracle Fusion Development | Grant Ronald "The online conference will include seminars, hands-on lab and live chats with our technical staff including me!" says Grant Ronald. "And the best bit, it doesn't cost you a single penny. It's free and available right on your desktop." Penguin is Getting Ready for Oracle OpenWorld 2012 | Zeynep Koch Linux fan? Check out Zeynep Koch's post for a list of Linux-based sessions at Oracle OpenWorld 2012 in San Francisco. Amazon Web Services (AWS) Autoscaling | Frank Munz "Autoscaling on AWS can only be configured with lengthy commands from the command line but not from the web cased AWS console," says Frank Munz. "Getting all the parameters right can be tricky." He demonstrates one easy example in this video. Oracle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broin "These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight," says O'Broin. How Much Data Is Created Every Minute? [INFOGRAPHIC] | Mashable Explaining what the "Big" in Big Data really means -- and it's more than a little mind-boggling. Thought for the Day "Real, though miniature, Turing Tests are happening all the time, every day, whenever a person puts up with stupid computer software." — Jaron Lanier Source: SoftwareQuotes.com

    Read the article

  • How do I get my character to move after adding to JFrame?

    - by A.K.
    So this is kind of a follow up on my other JPanel question that got resolved by playing around with the Layout... Now my MouseListener allows me to add a new Board(); object from its class, which is the actual game map and animator itself. But since my Board() takes Key Events from a Player Object inside the Board Class, I'm not sure if they are being started. Here's my Frame Class, where SideScroller S is the player object: package OurPackage; //Made By A.K. 5/24/12 //Contains Frame. import java.awt.BorderLayout; import java.awt.Button; import java.awt.CardLayout; import java.awt.Color; import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridBagLayout; import java.awt.GridLayout; import java.awt.Image; import java.awt.Rectangle; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.*; import javax.swing.plaf.basic.BasicOptionPaneUI.ButtonActionListener; public class Frame implements MouseListener { public static boolean StartGame = false; JFrame frm = new JFrame("Action-Packed Jack"); ImageIcon img = new ImageIcon(getClass().getResource("/Images/ActionJackTitle.png")); ImageIcon StartImg = new ImageIcon(getClass().getResource("/Images/JackStart.png")); public Image Title; JLabel TitleL = new JLabel(img); public JPanel TitlePane = new JPanel(); public JPanel BoardPane = new JPanel(); JPanel cards; JButton StartB = new JButton(StartImg); Board nBoard = new Board(); static Sound nSound; public Frame() { frm.setLayout(new GridBagLayout()); cards = new JPanel(new CardLayout()); nSound = new Sound("/Sounds/BunchaJazz.wav"); TitleL.setPreferredSize(new Dimension(970, 420)); frm.add(TitleL); frm.add(cards); cards.setSize(new Dimension(150, 45)); cards.setLayout(new GridBagLayout ()); cards.add(StartB); StartB.addMouseListener(this); StartB.setPreferredSize(new Dimension(150, 45)); frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frm.setSize(1200, 420); frm.setVisible(true); frm.setResizable(false); frm.setLocationRelativeTo(null); frm.pack(); } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { new Frame(); } }); } public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } @Override public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } }

    Read the article

  • Can't remove JPanel from JFrame while adding new class into it

    - by A.K.
    Basically, I have my Frame class, which instantiates all the properties for the JFrame, and draws a JLabel with an image (my title screen). Then I made a separate JPanel with a start button on it, and made a mouse listener that will allow me to remove these objects while adding in a new Board() class (Which paints the main game). *Note: The JLabel is SEPARATE from the JPanel, but it still gets moved to the side by it. Problem: Whenever I click the button though, it only shows a little square of what I presume is my board class trying to run. Code below for the Frame Class: package OurPackage; //Made By A.K. 5/24/12 //Contains Frame. import java.awt.BorderLayout; import java.awt.Color; import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridBagLayout; import java.awt.GridLayout; import java.awt.Image; import java.awt.Rectangle; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.*; import javax.swing.plaf.basic.BasicOptionPaneUI.ButtonActionListener; public class Frame implements MouseListener { public static boolean StartGame = false; ImageIcon img = new ImageIcon(getClass().getResource("/Images/ActionJackTitle.png")); ImageIcon StartImg = new ImageIcon(getClass().getResource("/Images/JackStart.png")); public Image Title; JLabel TitleL = new JLabel(img); public JPanel panel = new JPanel(); JButton StartB = new JButton(StartImg); JFrame frm = new JFrame("Action-Packed Jack"); public Frame() { TitleL.setPreferredSize(new Dimension(1200, 420)); frm.add(TitleL); frm.setLayout(new GridBagLayout()); frm.add(panel); panel.setSize(new Dimension(220, 45)); panel.setLayout(new GridBagLayout ()); panel.add(StartB); StartB.addMouseListener(this); StartB.setPreferredSize(new Dimension(220, 45)); frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frm.setSize(1200, 420); frm.setVisible(true); frm.setResizable(false); frm.setLocationRelativeTo(null); } public static void main(String[] args) { new Frame(); } public void mouseClicked(MouseEvent e) { StartB.setContentAreaFilled(false); panel.remove(StartB); frm.remove(panel); frm.remove(TitleL); //frm.setLayout(null); frm.add(new Board()); //Add Game "Tiles" Or Content. x = 1200 frm.validate(); System.out.println("Hit!"); } @Override public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } }

    Read the article

  • Give a session on C++ AMP – here is how

    - by Daniel Moth
    Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Determining the health of a Cisco switch port?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Is my Cisco switch port bad?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • How to install missing Sound Drivers in Ubuntu?

    - by Sakamoto Kazuma
    I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

    Read the article

< Previous Page | 43 44 45 46 47 48 49  | Next Page >