Search Results

Search found 4951 results on 199 pages for 'rubber keyboard'.

Page 47/199 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

  • Is USB supported in safe mode on XP?

    - by Hugh Allen
    According Microsoft, "Universal Serial Bus Devices Do Not Work in Safe Mode" under XP. However, in my testing this is incorrect. USB keyboards, mice and flash drives seem to work fine in safe mode (I made sure the BIOS was not providing support). This makes sense because a failure of a standard input device would be, in Microsoft parlance, a "bad user experience". So, Is USB supported in safe mode on XP? If your answer is no (agreeing with Microsoft), please provide a test case, preferably in a virtual machine, where a standard HID keyboard or mouse fails. Please state hardware / BIOS / OS configuration. Note that you will need a PS/2 keyboard attached in addition to your USB device(s) in order to use the boot menu. Virtual machine software usually emulates a PS/2 keyboard. Alternatively, you could add the /safeboot switch to boot.ini. If your answer is yes, please provide a link to some supporting documentation (either from Microsoft or someone authoritative). Your answer might be "devices X, Y and Z are supported but nothing else", in which case also give a link.

    Read the article

  • Acrobat 9 Pro - shortcut key failure

    - by Rick G
    I create numerous Acrobat PDF files from MS Word documents via Acrobat 9 Pro. I often need to print a single page from an Acrobat PDF file. I normally use the keyboard shortcut Control-P (Print Dialog) and ALT-U (current page). I recently set up a new PC with Windows 7, and this shortcut combination does not work. When I press ALT-U, it moves the highlight to the correct item, but does not select the radio button. If I press the Enter key, then I print the entire document instead of the current page - VERY annoying! It looks like there is an error in the design of the Print dialog for Acrobat. There are two items which have ALT-U as the keyboard shortcut. They are "Current page" in the Print range frame, and "Summarize comments". I have been able to use Control-P (Print Dialog) and ALT-U (current page) with no problems on virtual machines and older computers running Windows XP. Maybe I installed some software on the new PC that is messing up the keyboard shortcut. Is there any way to figure out the culprit - or is this a known problem with Acrobat?

    Read the article

  • Shortcut To Full Screen App In Lion

    - by omghai2u
    I postponed getting OSX Lion for as long as I possibly could. Now that I have it, I'm having lots of difficulties getting it to perform how I want. On Snow Leopard my typical setup for working was 4 spaces. I'd keep a Windows VM open on Space #4 full-screened, a Linux open on space #3, and I'd do other stuff on spaces #1 and #2. My keyboard shortcut allowed me to switch between my Windows work (Command + 4) to my Linux work (Command + 3) very quickly, and without the need for my hands to leave the keyboard (or effectively to even quit typing). Productivity was good. I see that on Lion a full-screened VM (and yes, they need to be full screened, Fusion's Unity won't cut it for what I need to do) is its own separate Desktop. I have set up 4 desktops and made my keyboard shortcuts to move between them Command + # just as before. But how do I get my full-screened VM to be one of those already existing desktops? Or, rather, how do I make a short-cut for the full-screened app?

    Read the article

  • 20 of the Best of Shortcut and Hotkey Tips for Your Windows PC

    - by Lori Kaufman
    For those of you who like to use the quickest methods of getting things done on your computer, we have shown you many Windows shortcuts and hotkeys for performing useful tasks in the past. This article compiles 20 of the best Windows shortcuts and hotkeys we have documented. Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive Follow How-To Geek on Google+

    Read the article

  • Function keys for ASUS n56vm not working

    - by Lars
    i have installed Ubuntu 12.10 (64bits) (3.5.0-18 kernel) on an ASUS N56VM. Most fn+key are working except for: brightness keys (fn+f5/fn+f6) don't work. fn+c - gamma keys fc+v - camera fn+space - toggle speed. I really like, at least, to have the brightness keys working. Can you help? Best Regards $ dmesg | grep -i asus [ 0.000000] DMI: ASUSTeK COMPUTER INC. N56VM/N56VM, BIOS N56VM.206 04/13/2012 [ 0.000000] ACPI: RSDP 00000000cafcc000 00024 (v02 _ASUS_) [ 0.000000] ACPI: XSDT 00000000cafcc078 00074 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000cafdf858 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000cafcc188 136CA (v02 _ASUS_ Notebook 00000013 INTL 20091112) [ 0.000000] ACPI: APIC 00000000cafdf950 00092 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000cafdf9e8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: ECDT 00000000cafdfa30 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: MCFG 00000000cafdfaf8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000cafdfb38 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001) [ 0.000000] ACPI: HPET 00000000cafdfcb0 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: BGRT 00000000cafe1090 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013) [ 9.670500] asus_wmi: ASUS WMI generic driver loaded [ 9.671627] asus_wmi: Initialization: 0x1asus_wmi: BIOS WMI version: 7.9 [ 9.671673] asus_wmi: SFUN value: 0x6a0877<6>[ 9.672086] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4 [ 9.732438] Registered led device: asus::kbd_backlight [ 9.733242] asus_wmi: Backlight controlled by ACPI video driver

    Read the article

  • Use Those Extra Mouse Buttons to Increase Efficiency

    - by Mark Virtue
    Did you know that the most commonly used mouse actions are clicking a window’s “Close” button (the X in the top-right corner), and clicking the “Back” button (in a browser and various other programs)?  How much time do you spend every day locating the Close button or the Back button with your mouse so that you can click on them?  And what about that mouse you’re using – how many buttons does it have, besides the two main ones?  Most mouses these days have at least four (including the scroll-wheel, which a lot of people don’t realize is also a button as well).  Why not assign those extra buttons to your most common mouse actions, and save yourself a bundle of mousing-around time every day? If your mouse was manufactured by one of the “premium” mouse manufacturers (Microsoft, Logitech, etc), it almost certain came with driver software to allow you to customize your mouse’s controls and take advantage of your mouse’s special features.  Microsoft, for example, provides driver software called IntelliPoint (link below), while Logitech provides SetPoint.  It’s possible that your mouse has some extra buttons but doesn’t come with its own driver software (the author is using a Microsoft Bluetooth Notebook Mouse 5000, which amazingly is not supported by the Microsoft IntelliPoint software!).  If your mouse falls into this category, you can use a marvelous free product called X-Mouse Button Control, from Highresolution Enterprises (link below).  It provides a truly amazing array of mouse configuration options, including assigning actions to buttons on a per-application basis. Once X-Mouse Button Control is downloaded, its setup process is quite straightforward. Once downloaded, you can start the program via Start / Highresolution Enterprises / X-Mouse Button Control.  You will find the program’s icon in the system tray: Right-click on the icon and select Setup from the pop-up menu.  The program’s configuration window appears: It’s extremely unlikely that we will want to change the functionality of our mouse’s two main buttons (left and right), so instead we’ll look at the rest of the options on the right side of the window.  The Middle Button refers to either the third, middle button (found on some old mouses), or the pressing of the wheel itself, as a button (if you didn’t know you could press your wheel like a button, try it out now).  Mouse Button 4 and Mouse Button 5 usually refer to the extra buttons found on the side of the mouse, often near your thumb. So what can we use these extra mouse buttons for?  Well, clearly Close and Back are two obvious candidates.  Each of these can be found by selecting them from the drop-down menu next to each button field: Once the two options are chosen, the window will look something like this: If you’re not interested in choosing Back or Close, you may like to try some of the other options in the list, including: Cut, Copy and Paste Undo Show the Desktop Next/Previous track (for media playback) Open any program Simulate any keystroke or combination of keystrokes ….and many other options.  Explore the drop-down list to see them all. You may decide, for example, that closing the current document (as opposed to the current program) would be a good use for Mouse Button 5.  In other words, we need to simulate the keypress of Ctrl-F4.  Let’s see how we achieve this. First we select Simulated Keystrokes from the drop-down list: The Simulated Keystrokes window opens: The instructions on the page are pretty comprehensive.  If you want to simulate the Ctrl-F4 keystroke, you need to type {CTRL}{F4} into the box: …and then click OK. Assigning Actions to Buttons on a Per-Application Basis One of the most powerful features of X-Mouse Button Control is the ability to assign actions to buttons on a per-application basis.  This means that if we have a particular program open, then our mouse will behave differently – our buttons will do different things. For example, when we have Windows Media Player open, for example, we may wish to have buttons assigned to Play/Pause, Next track and Previous track, as well as changing the volume with the mouse!  This is easy with X-Mouse Button Control.  We start by opening Windows Media Player.  This makes the next step easier.  Then we return to X-Mouse Button Control and add a new “configuration”.  This is done by clicking the Add button: A window opens containing a list of all running programs, including our recently opened Windows Media Player: We select Windows Media Player and click OK.  A new, blank “configuration” is created: We repeat the earlier steps to assign buttons to Play/Pause, Next track and Previous track, and assign scrolling the wheel to alter the volume:   To save all our changes and close the window, we click Apply. Now spend a few minutes thinking of all the applications you use the most, and what are the most common simple tasks you perform in each of those applications.  Those tasks are then perfect candidates for per-application button assignments. There are many more configuration options and capabilities of X-Mouse Button Control – too many to list here.  We encourage you to spend a bit of time exploring the Setup window.  Then, most important of all, don’t forget to use your new mouse buttons!  Get into the habit of using them, and then after a while you’ll start to wonder how you ever tolerated the laborious, tedious, time-consuming process of actually locating each window’s Close button… Download X-Mouse Button Control Highresolution Enterprise Similar Articles Productive Geek Tips Add Specialized Toolbar Buttons to Firefox the Easy WayBoost Your Mouse Pointing Accuracy in WindowsMake Mouse Navigation Faster in WindowsVista Style Popup Previews for Firefox TabsStupid Geek Tricks: Using the Quick Zoom Feature in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses Mashpedia is a Real-time Encyclopedia

    Read the article

  • What is causing my spacebar to randomly stop working?

    - by Chris Billington
    A couple of times a day, I'll be typing something and realise I can't type spaces. Usually the cursor will flicker instead when I press the spacebar, and I can type all other letters as far as I can tell. If I'm in a terminal the cursor turns from a solid square to an empty square until I release the spacebar. For some reason, restarting compiz with alt-F2 compiz fixes it, until it next occurs. I can still copy and paste spaces from sources that already have them, and I can still insert spaces with ctrl-shift-u, 20, enter. This has been happening for a while, since before I upgraded to maverick, but it feels like its beceoming more frequent. There really doesn't seem to be any kind of a pattern to it. I'm using 64 bit ubuntu 10.10 on a system76 panp7 laptop. Any ideas how I might troubleshoot? EDIT: using xev, normally a spacebar registers as: KeyPress event, serial 36, synthetic NO, window 0x5600001, root 0x101, subw 0x0, time 26488647, (88,403), root:(748,458), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XmbLookupString gives 1 bytes: (20) " " XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x5600001, root 0x101, subw 0x0, time 26488729, (88,403), root:(748,458), state 0x10, keycode 65 (keysym 0x20, space), same_screen YES, XLookupString gives 1 bytes: (20) " " XFilterEvent returns: False But when it's stopped behaving a press of the spacebar instead gives the three events: FocusOut event, serial 36, synthetic NO, window 0x5600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x5600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FURTHER EDIT: Ok, so I think I've solved the problem, and by that I mean I now know which package to file a bug against. I have a hot corner which initiates a window picker, and I've customised the window picking so that left click goes to a window, right click closes one and spacebar zooms in on one. When I go to this hot corner, compiz must take control of my spacebar, and clearly isn't giving it back when I leave the window picker. So I'll be filing a bug against compiz. reported:here

    Read the article

  • Multiple Key Presses in XNA?

    - by Bryan Harrington
    I'm actually trying to do something fairly simple. I cannot get multiple key presses to work in XNA. I've tried the following pieces of code. else if (keyboardState.IsKeyDown(Keys.Down) && (keyboardState.IsKeyDown(Keys.Left))) { //Move Character South-West } and I tried. else if (keyboardState.IsKeyDown(Keys.Down)) { if (keyboardState.IsKeyDown(Keys.Left)) { //Move Character South-West } } Neither worked for me. Single presses work just fine. Any thoughts?

    Read the article

  • Vim key mappings / plugin XCode?

    - by Daniel Upton
    I'm a developer who mostly does web stuff in ruby and C#.. I'd like to start tinkering with iOS and Mac development, Over the last few month i've been trying to get fluent in one set of key bindings (vi / vim because it just feels right).. I have the awesome ViEmu installed for visual studio on windows which gives me a ton of the vim awesomeness side by side with visual studio power toys.. Is there anything like this for xcode? I know i could set up MacVim as the default editor but i'm not too interested in this as it means losing all of xcode's cocoa awareness.. The other option of course would be to go for the lowest common denominator and switch to emacs (as the mac keybindings are based massively on emacs) but lets not think about that for too long. :P

    Read the article

  • Typing tutor games with good playablity

    - by matt wilkie
    Are there any linux typing tutor games which are enjoyable games in their own right? I'm a computer professional, but have never learned to type properly. I also don't want my kids to pick up my bad habits! The kids are okay with TuxTyping, for a time. Something like Typing of the Dead sounds great, but is Windows only, and as far as I can tell one of a kind. I also don't want the young'uns hooked on first person shooters just yet. So are there any quality typing games for a range of ages?

    Read the article

  • How can I use the Windows key?

    - by torbengb
    The Windows key seems to not have any use in Ubuntu, but since I'm just coming from Windows I'm used to this key having some function. How can I make good use of the Windows key in Ubuntu? I've seen that I can remap keys in SystemPreferencesKeyboardLayoutOptionsAlt/Win key behavior, but I have no idea what the choices meta, super, hyper mean. The help button in this dialog doesn't give any specifics about them. I've experimented a little and found that meta seems to have some use, like Win+M = Me menu, or Win+S is the shutdown menu, but for some keys (B, I) it's more like Ctrl (bold, italic). Haven't found any further. What would a useful setting be for a Linux newbie?

    Read the article

  • Rebind Alt key to win using setxkbmap?

    - by Wayne Werner
    Hi, After an hour or two of manpage and Google searching and finding no solution or good resources, I've come for help! I have set my Caps Lock key to Ctrl using setxkbmap -option ctrl:nocaps - this works perfectly fine. However, since I use [awesome][1], and an IBM model M which lacks the meta key, I need my left alt key to replace the windows key. Using xkeycaps I was able to get this to work, except it killed my arrow keys and End. Problematic. Unfortunately, documentation on setxkbmap options are sparse. and I can't find the proper option to use. Thanks for any links/solutions.

    Read the article

  • Remapping Shift Selection in Gnome Terminal

    - by Gowie47
    Hey so I was hoping somebody could help me out in finding a way to get shift-selection working in gnome-terminal on Ubuntu 11.10. I found the question/bug report below but neither seem to have a solution. I use Emacs for development and being able to select my current line with shift-ctrl-a/e is something I find myself trying to do every couple of minutes. I use 10.04 at work and this is possible so I am not sure what has changed. If it matters I am using Gnome 3 Shell and I use bashish to style my terminal. Thanks in advance! https://bugs.launchpad.net/ubuntu/+source/vte/+bug/546021 http://askubuntu.com/questions/31991/using-the-shift-key-in-terminal

    Read the article

  • Make it so you can't stop command with CTRL+C

    - by Xero
    So, I was playing some Zork 1, and I went to copy some text to show a friend of mine I accidentally forgot to hold the shift key when pressing CTRL+C. This stopped the command and I lost my Zork data, is there some sort of "helpful" tip out their that I can to prevent from stopping the command when press the keys CTRL+C? Note that I'm running the game zork via Terminal (emulator), I installed it with these steps: http://www.eugenemdavis.com/playing-zork-linux-frotz

    Read the article

  • How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

    - by Dave B.
    I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

    Read the article

  • How to remap Fn key combinations (Lenovo G500)

    - by Anatoli
    I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • Camera doesnt move on opengl qt

    - by hugo
    Here is my code, as my subject indicates i have implemented a camera but i couldnt make it move,Thanks in advance. #define PI_OVER_180 0.0174532925f define GL_CLAMP_TO_EDGE 0x812F include "metinalifeyyaz.h" include include include include include include include metinalifeyyaz::metinalifeyyaz(QWidget *parent) : QGLWidget(parent) { this->setFocusPolicy(Qt:: StrongFocus); time = QTime::currentTime(); timer = new QTimer(this); timer->setSingleShot(true); connect(timer, SIGNAL(timeout()), this, SLOT(updateGL())); xpos = yrot = zpos = 0; walkbias = walkbiasangle = lookupdown = 0.0f; keyUp = keyDown = keyLeft = keyRight = keyPageUp = keyPageDown = false; } void metinalifeyyaz::drawBall() { //glTranslatef(6,0,4); glutSolidSphere(0.10005,300,30); } metinalifeyyaz:: ~metinalifeyyaz(){ glDeleteTextures(1,texture); } void metinalifeyyaz::initializeGL(){ glShadeModel(GL_SMOOTH); glClearColor(1.0,1.0,1.0,0.5); glClearDepth(1.0f); glEnable(GL_DEPTH_TEST); glEnable(GL_TEXTURE_2D); glDepthFunc(GL_LEQUAL); glClearColor(1.0,1.0,1.0,1.0); glShadeModel(GL_SMOOTH); GLfloat mat_specular[]={1.0,1.0,1.0,1.0}; GLfloat mat_shininess []={30.0}; GLfloat light_position[]={1.0,1.0,1.0}; glMaterialfv(GL_FRONT, GL_SPECULAR, mat_specular); glMaterialfv(GL_FRONT,GL_SHININESS,mat_shininess); glLightfv(GL_LIGHT0, GL_POSITION, light_position); glEnable(GL_LIGHT0); glEnable(GL_LIGHTING); QImage img1 = convertToGLFormat(QImage(":/new/prefix1/halisaha2.bmp")); QImage img2 = convertToGLFormat(QImage(":/new/prefix1/white.bmp")); glGenTextures(2,texture); glBindTexture(GL_TEXTURE_2D, texture[0]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img1.width(), img1.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img1.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glBindTexture(GL_TEXTURE_2D, texture[1]); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img2.width(), img2.height(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img2.bits()); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST); // Really nice perspective calculations } void metinalifeyyaz::resizeGL(int w, int h){ if(h==0) h=1; glViewport(0,0,w,h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0f, static_cast<GLfloat>(w)/h,0.1f,100.0f); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); } void metinalifeyyaz::paintGL(){ movePlayer(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); GLfloat xtrans = -xpos; GLfloat ytrans = -walkbias - 0.50f; GLfloat ztrans = -zpos; GLfloat sceneroty = 360.0f - yrot; glLoadIdentity(); glRotatef(lookupdown, 1.0f, 0.0f, 0.0f); glRotatef(sceneroty, 0.0f, 1.0f, 0.0f); glTranslatef(xtrans, ytrans+50, ztrans-130); glLoadIdentity(); glTranslatef(1.0f,0.0f,-18.0f); glRotatef(45,1,0,0); drawScene(); int delay = time.msecsTo(QTime::currentTime()); if (delay == 0) delay = 1; time = QTime::currentTime(); timer->start(qMax(0,10 - delay)); } void metinalifeyyaz::movePlayer() { if (keyUp) { xpos -= sin(yrot * PI_OVER_180) * 0.5f; zpos -= cos(yrot * PI_OVER_180) * 0.5f; if (walkbiasangle >= 360.0f) walkbiasangle = 0.0f; else walkbiasangle += 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } else if (keyDown) { xpos += sin(yrot * PI_OVER_180)*0.5f; zpos += cos(yrot * PI_OVER_180)*0.5f ; if (walkbiasangle <= 7.0f) walkbiasangle = 360.0f; else walkbiasangle -= 7.0f; walkbias = sin(walkbiasangle * PI_OVER_180) / 10.0f; } if (keyLeft) yrot += 0.5f; else if (keyRight) yrot -= 0.5f; if (keyPageUp) lookupdown -= 0.5; else if (keyPageDown) lookupdown += 0.5; } void metinalifeyyaz::keyPressEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_Escape: close(); break; case Qt::Key_F1: setWindowState(windowState() ^ Qt::WindowFullScreen); break; default: QGLWidget::keyPressEvent(event); case Qt::Key_PageUp: keyPageUp = true; break; case Qt::Key_PageDown: keyPageDown = true; break; case Qt::Key_Left: keyLeft = true; break; case Qt::Key_Right: keyRight = true; break; case Qt::Key_Up: keyUp = true; break; case Qt::Key_Down: keyDown = true; break; } } void metinalifeyyaz::changeEvent(QEvent *event) { switch (event->type()) { case QEvent::WindowStateChange: if (windowState() == Qt::WindowFullScreen) setCursor(Qt::BlankCursor); else unsetCursor(); break; default: break; } } void metinalifeyyaz::keyReleaseEvent(QKeyEvent *event) { switch (event->key()) { case Qt::Key_PageUp: keyPageUp = false; break; case Qt::Key_PageDown: keyPageDown = false; break; case Qt::Key_Left: keyLeft = false; break; case Qt::Key_Right: keyRight = false; break; case Qt::Key_Up: keyUp = false; break; case Qt::Key_Down: keyDown = false; break; default: QGLWidget::keyReleaseEvent(event); } } void metinalifeyyaz::drawScene(){ glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,1.0f); // glColor3f(0,0,1); //back glVertex3f(-6,0,-4); glVertex3f(-6,-0.5,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,0.0f,-1.0f); //front glVertex3f(6,0,4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,0,4); glEnd(); glBegin(GL_QUADS); glNormal3f(-1.0f,0.0f,0.0f); // glColor3f(0,0,1); //left glVertex3f(-6,0,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); // glColor3f(0,0,1); //right glVertex3f(6,0,-4); glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(6,0,4); glEnd(); glBindTexture(GL_TEXTURE_2D, texture[0]); glBegin(GL_QUADS); glNormal3f(0.0f,1.0f,0.0f);//top glTexCoord2f(1.0f,0.0f); glVertex3f(6,0,-4); glTexCoord2f(1.0f,1.0f); glVertex3f(6,0,4); glTexCoord2f(0.0f,1.0f); glVertex3f(-6,0,4); glTexCoord2f(0.0f,0.0f); glVertex3f(-6,0,-4); glEnd(); glBegin(GL_QUADS); glNormal3f(0.0f,-1.0f,0.0f); //glColor3f(0,0,1); //bottom glVertex3f(6,-0.5,-4); glVertex3f(6,-0.5,4); glVertex3f(-6,-0.5,4); glVertex3f(-6,-0.5,-4); glEnd(); // glPushMatrix(); glBindTexture(GL_TEXTURE_2D, texture[1]); glBegin(GL_QUADS); glNormal3f(1.0f,0.0f,0.0f); glTexCoord2f(1.0f,0.0f); //right far goal post front face glVertex3f(5,0.5,-0.95); glTexCoord2f(1.0f,1.0f); glVertex3f(5,0,-0.95); glTexCoord2f(0.0f,1.0f); glVertex3f(5,0,-1); glTexCoord2f(0.0f,0.0f); glVertex3f(5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(5,0.5,-1); glVertex3f(5,0,-1); glVertex3f(5.05,0,-1); glVertex3f(5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(5.05,0.5,-0.95); glVertex3f(5.05,0,-0.95); glVertex3f(5,0,-0.95); glVertex3f(5, 0.5, -0.95); glColor3f(1,1,1); //right near goal post front face glVertex3f(5,0.5,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0,1); glVertex3f(5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(5,0.5,1); glVertex3f(5,0,1); glVertex3f(5.05,0,1); glVertex3f(5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(5.05,0.5,0.95); glVertex3f(5.05,0,0.95); glVertex3f(5,0,0.95); glVertex3f(5,0.5, 0.95); glColor3f(1,1,1); //right crossbar front face glVertex3f(5,0.55,-1); glVertex3f(5,0.55,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5.05,0.5,1); glVertex3f(5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(5.05,0.5,-1); glVertex3f(5.05,0.5,1); glVertex3f(5,0.5,1); glVertex3f(5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(5.05,0.55,-1); glVertex3f(5.05,0.55,1); glVertex3f(5,0.55,1); glVertex3f(5,0.55,-1); glColor3f(1,1,1); //left far goal post front face glVertex3f(-5,0.5,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5,0,-1); glVertex3f(-5, 0.5, -1); glColor3f(1,1,1); //right far goal post back face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post left face glVertex3f(-5,0.5,-1); glVertex3f(-5,0,-1); glVertex3f(-5.05,0,-1); glVertex3f(-5.05, 0.5, -1); glColor3f(1,1,1); //right far goal post right face glVertex3f(-5.05,0.5,-0.95); glVertex3f(-5.05,0,-0.95); glVertex3f(-5,0,-0.95); glVertex3f(-5, 0.5, -0.95); glColor3f(1,1,1); //left near goal post front face glVertex3f(-5,0.5,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0,1); glVertex3f(-5,0.5, 1); glColor3f(1,1,1); //right near goal post back face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post left face glVertex3f(-5,0.5,1); glVertex3f(-5,0,1); glVertex3f(-5.05,0,1); glVertex3f(-5.05,0.5, 1); glColor3f(1,1,1); //right near goal post right face glVertex3f(-5.05,0.5,0.95); glVertex3f(-5.05,0,0.95); glVertex3f(-5,0,0.95); glVertex3f(-5,0.5, 0.95); glColor3f(1,1,1); //left crossbar front face glVertex3f(-5,0.55,-1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar back face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5.05,0.5,1); glVertex3f(-5.05,0.5,-1); glColor3f(1,1,1); //right crossbar bottom face glVertex3f(-5.05,0.5,-1); glVertex3f(-5.05,0.5,1); glVertex3f(-5,0.5,1); glVertex3f(-5,0.5,-1); glColor3f(1,1,1); //right crossbar top face glVertex3f(-5.05,0.55,-1); glVertex3f(-5.05,0.55,1); glVertex3f(-5,0.55,1); glVertex3f(-5,0.55,-1); glEnd(); // glPopMatrix(); // glPushMatrix(); // glTranslatef(0,0,0); // glutSolidSphere(0.10005,500,30); // glPopMatrix(); }

    Read the article

  • Backspace key not working

    - by Adi
    I have two keyborad keys, "Back" and "Forward". Forward works like it should, here is the output from xev for it: KeyPress event, serial 36, synthetic NO, window 0x4600001, root 0x175, subw 0x0, time 16491048, (21,-17), root:(771,35), state 0x10, keycode 167 (keysym 0x1008ff27, XF86Forward), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4600001, root 0x175, subw 0x0, time 16491272, (21,-17), root:(771,35), state 0x10, keycode 167 (keysym 0x1008ff27, XF86Forward), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Back on the other hand gives this from xev FocusOut event, serial 36, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Can someone help me make Back work? I don't understand why X generats Focus events for it..

    Read the article

  • Disable XF86Back and XF86Forward (back/forward on Lenovo Thinkpad)

    - by Nicolas Raoul
    My Thinkpad R500 has back/forward keys just about the direction keys, so on Firefox I keep losing entered text, accidentally. How to disable these back/forward keys? Excerpt from xev: KeyPress event, serial 29, synthetic NO, window 0x5e00001, root 0xbc, subw 0x0, time 2375874, (1279,794), root:(1285,881), state 0x10, keycode 166 (keysym 0x1008ff26, XF86Back), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 32, synthetic NO, window 0x5e00001, root 0xbc, subw 0x0, time 2377115, (1279,794), root:(1285,881), state 0x10, keycode 167 (keysym 0x1008ff27, XF86Forward), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • Lenovo IdeaPad P400 - Disabling the annoying requirement for the Fn key to use F1-F12

    - by Yon
    On Lenovo laptops, in order to use F5 you need to press Fn-F5 (same with F1-F12). It's really annoying and I'd like to reverse the situation. On Windows, a Lenovo driver could help: http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Disable-Fn-Keys-E420/td-p/803609 How can I resolve this on Ubuntu 12.04? I couldn't find Lenovo drivers for Linux. UPDATE: Found a peculiar solution for this on Windows. Can anyone recommend a good equivalent for Xubuntu: http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/How-do-you-reset-the-function-keys-on-a-P500-ideapad-to-legacy/td-p/958995

    Read the article

  • dead keys not working in java app

    - by jippie
    The Arduino IDE is based on a java application called processing. While typing text into processing, it refuses to accept any of the characters under dead keys like " ' ^. As a work around I: Open another window (usually my browser or mail client); I type the character I need; Select and copy the character onto my clip board; Copy the character into processing. What do I have to do to make processing accept characters under dead keys? Disabling dead keys is not an option.

    Read the article

  • How do I make Home and End work in PuTTY SSH with fish shell?

    - by endolith
    Years ago, an Ubuntu update broke this and I've never found a solution. I have fish as my default shell. Ubuntu 12.10 Locally (Gnome Terminal), Home and End keys work fine in both fish and bash. When I log in by SSH using PuTTY, then run bash, Home and End work fine inside of bash. However, when I log in by SSH using PuTTY, in the default fish shell, pressing Home key produces [1~ (sometimes erasing the line, sometimes not). When I press End, it produces [4~. How do I get Home and End to work correctly?

    Read the article

  • Why does pasting sometimes not work in gnome-terminal?

    - by Matthew
    Ctrl + Shift + C and Ctrl + Shift + V are supposed to replace the normal Ctrl + C and Ctrl + V in gnome-terminal. Sometimes they work, but usually they have no effect. What are some potential reasons for this? I'm not sure what other information to give. Edit: It seems that manually selecting Paste from the Edit menu does not work either. Right click > Paste works, but Edit > Paste does not. Copying works, but pasting does not. Also, I have vi-mode enabled (set -o vi in my ~/.bashrc). Could this have something to do with it? Edit: Here is a video demonstrating the problem. I used Screenkey (in "raw" mode, to catch "shift") to show what keys I am pressing.

    Read the article

  • Ubuntu Server SHH backspace Bad Character

    - by Edwin Lunando
    so while while I'm using SSH to connect my server the backspace shows me bad character. The backspace is the one with question mark. The backspace itself works normally, but in the screen, it wasn't very neat to look stacking question mark. This is the example. The square-bracketed question mark means backspace. cat[?] output: ca: not found cat[?][?] output: c:not found cat[?][?][?] output: nothing, because it simple delete the 3 character. Please help. Thank you.

    Read the article

  • xvkbd broken with warnings

    - by Maxrunner
    Im using the latest version of ubunto and i cant run xvkbd properly, i get these errors: $ xvkbd Warning: Cannot convert string "--lucidatypewriter-bold-r--*-12---*---iso8859-1" to type FontStruct xvkbd: Mode_switch not available as a modifier xvkbd: although ISO_Level3_Shift is used instead, AltGr may not work correctly Warning: Cannot convert string "--lucida-bold-i--*-14---*---iso8859-1" to type FontStruct xvkbd: Mode_switch not available as a modifier xvkbd: although ISO_Level3_Shift is used instead, AltGr may not work correctly how can i solve this?, im trying to use this with xbindkeys.

    Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >