Search Results

Search found 2280 results on 92 pages for 'switching'.

Page 47/92 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Tons of spam on dreamhost mail user account

  - by user122022

  I use dreamhost for my webserver/ email host. I have about 25 users on one domain. and 1 of these users is absolutely inundated with spam every day. I have tried using dreamhosts poor blacklist feature, which was semi working (still letting a lot through) but I reached the 1000 email blacklist maximum very quickly. I have the ability to switch to google apps but that would be very expensive for 25 users. What options do I have aside from changing hosts with better spam filtering? I don't think its possible to only switch 1 user to google apps, it has to be the whole domain. There are other benefits to switching but I don't think they outweigh the cost for this company.

  Read the article

• Computer hanged in the middle of bios flashing process

  - by Stalker

  I have a laptop: Toshiba Satellite c660-17j, today I decided to update BIOS. I've downloaded bios updater from manufacturer's web site, and in the middle of flashing process computer hanged. I was waiting more than 30 minutes, but nothing was changed on the screen, i've tryed to PRESS MORE BUTTONS, but there were no reactions, so i've turned it off by removing battery (all other methods failed, even pressing power button for ~10 secs). After that computer can't start. I understand, that there's MESS in BIOS chip, and it's possible to re-flash it with hardware programmer, but I don't have it. I remember, that on some PCs (even on my eeepc) there was possibility to re-flash bios by inserting usb flash-disk (with .dat file on it, which contained BIOS), and power on PC, while holding some keys combination, then PC was switching to BIOS programming mode and re-flashed BIOS, after that it was possible to boot up normaly. Is there a way to recover computer without hardware programming BIOS chip? p.s. sorry for my english.

  Read the article

• Group Policy dealing with IE zone assignment not sticking!

  - by Brandon

  I have a group policy (which ONLY deals with the zone assignment) -that is continually switching on and off with reboots. I thought it was a conflicting group policy but when I run group policy modeling report it doesn't show any descrepancies that I can see. I thought it may be an issue with one domain controller wasn't replicating my policy change to the other one, but this isn't the case. I checked both domain controllers and they show the same information. The assignment is on a user basis and is in: user configuration > administrative templates > windows components > internet explorer > internet control panel > security and is site to zone assignment.

  Read the article

• Option and command keys in Mac OS X are swapped and keyboard preferences do not set them back.

  - by bikesandcode

  On my MacBook Pro, I occasionally use external keyboards, generally Windows ones and things have been fine. Yesterday, I plugged in a new one, remapped the command/option keys so the windows/alt keys were in the same configuration, again, nothing new here. However, this time when I unplugged the USB keyboard, the laptops option/command keys remained switched. More annoying is that if I go into the System Preferences - Keyboards - Modifier keys, remapping the keys to actions does not work. I can use the drop downs to disable any specific keys, but switching the behaviours does nothing. (Cmd/Option obvious, tried remapping anything to caps lock and a few other combinations, no joy. Restore defaults set the configuration to what I'd expect, but the settings are evidently ignored.) So: Any ideas?

  Read the article

• CentOS Can't connect to FTP

  - by Steven

  I'm having troubles connecting to my ftp server. Here's what it says, Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/sxxxn" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing My vsftpd.conf file: local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES ftpd_banner=Welcome to xxxx.com xferlog_std_format=NO chroot_local_user=NO chroot_list_enable=NO chroot_list_file=/etc/vsftpd/chroot_list listen=YES pasv_enable=YES pasv_min_port=3000 pasv_max_port=3050 pasv_address=64.xx.xx.xxx pam_service_name=vsftpd userlist_enable=YES userlist_deny=NO userlist_file=/etc/vsftpd/vsftpd.userlist And I've got these 2 in my iptables -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m tcp --dport 3000:3050 -j ACCEPT I've also disabled selinux.

  Read the article

• Fix X11 forwarding on OSX

  - by Such

  I am looking for a way to fix/debug a X11 forwarding session on OSX. Here is my situation: From my mac I connect to a Ubuntu workstation with ssh -X (tried ssh -Y as well). X11 forwarding works perfectly with firefox for instance, X11/Quartz is started automatically on OSX and firefox is displayed. X11 forwarding does not work with bat (Bacula graphical console): X11 is started but no window is displayed. There are no errors (/private/var/log/system.log). When I try doing the same from another Ubuntu workstation, it works perfectly for both firefox and bat. I guess the problem is on OSX side then. I tried switching some options in X11 but nothing works. Would you have any idea on how to move forward? Thanks!

  Read the article

• Chrome tabs showing wrong page

  - by Jeff

  I have a problem with Google Chrome where occasionally when switching to a newly created tab (usually one made from opening a link into a new tab), the wrong page shows. The correct page is functional, links and other functions are present, but I cannot see them because Chrome seems to be reading the page I want but showing another. Sometimes it is identical to the tab I just left, sometimes it shows the content of a previously closed tab. The problem sorts out when I switch to another tab and back, and then the correct page shows. This happens fairly often and is rather annoying. Some of my friends have also experienced this, and have stopped using Chrome because of it. If anybody else has seen this problem and happens to know a fix, I'd really appreciate it.

  Read the article

• Can I use VT-D with a windows host for a VM?

  - by Journeyman Geek

  I've got a fairly beefy gaming system that I also run occational virtual machines on. It runs windows 8 and the built in hyper V virtual machine software at the moment and has a core i7 3770 (which unlike the unlocked model, should support VT-D), an Asus P8Z77V and a gforce 660 video card(also asus). I figure that if I could use VT-D I could add a cheap dedicated 3d card for a VM, in case I wanted somewhat more than the 'basics'. I know KVM and Xen support this to some level on linux, but can I do so on windows? I'm open to switching VM software if need be.

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• how to get a decent emacs setup on linux

  - by Hersheezy

  I am currently interested in switching from vim to emacs. One of the more compelling reasons for this is the smooth integration with a unix environment. The most experienced emacs users I have seen have a bash prompt at the bottom of their window, with stdout going to a buffer right above it. They then interact with the output of programs such as grep in interesting ways. I am on Ubuntu 10.04 and the default emacs environment does not seem to do much for me in the way of integration. For example, in the M-x shell mode, output from basic commands like ls produce lots of strange characters and hitting the up arrow does not go to previous commands. Any recommendations on a good direction to go in?

  Read the article

• What laptops can run an external 27" or 30" screen at 2560x1600 native resolution? [closed]

  - by Moin Zaman

  SU Folks, What laptops do you know off that can run a 27" or 30" external monitor as a secondary display (Extending desktop onto second screen, without switching off the laptop's own built in screen) at the screens native resolution of 2560x1600. I'm not interested docks or USB video adapters etc. Just via the laptop's built in display ports. List the port used and cable as well if possible. Reference links / posts that confirm it are an added bonus. I'm hoping people who've tried it themselves and / or confirmed it can list specific models of laptops so we can build up a good list.

  Read the article

• Is a memory upgrade a viable option to fix performance issues? [closed]

  - by ratchet freak

  I'm currently seeing my PC getting bogged down by Firefox 11.0 alone with only one hundred tabs open. Resulting in a memory use of over 530M , VM size of over 800M and an insane amount of page faults (easily reaching 100 million over the course of the day). The PF delta during normal operation easily reaches 7k with peaks to 15k sometimes reaching over 20k. This leads to a (real) deterioration to response time when switching, opening and closing tabs, opening menus, typing, ... My question is: Am I right in assuming that plugging in more RAM (either adding 2x1GB or replacing the existing RAM with 2x2GB or 4x1GB) will solve this problem? My specs: Windows XP Home Edition SP3 (32 bit) Intel Core Duo 2,4 GHz 2x512MB RAM 800MHz DDR2 (dual channel) 4MB unified cache 320GB HDD Intel G33 (X3100) onboard graphics (no graphics card but PCI express x16 slot is available)

  Read the article

• Doing "text mode 'splash' game" during boot.

  - by Vi

  Sometimes I want to do something (for example, playing a simple text-mode game) while the system is booting up. This is especially useful when lengthy reiserfs transaction replays are happening. Current hacky way of doing it is: Put the program on initramfs. Before running /sbin/init, "openvt 2 /my/program". Turn off messages from kernel (sysrq 0) Override /dev/console with /dev/null (to prevent boot messages). The problems are: There are STILL some messages interfering with program output. I can't see boot messages by switching to that virtual terminal back. After finishing the boot sequence, /dev/tty2 ends up being attached both to getty and my program. How to do it properly without of running graphical splashes? The system is Linux Debian Squeeze, no dependency based sysv scripts.

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• Change ip route metric

  - by notphunny

  I'm constantly switching between eth0 and wlan0 interface on my archlinux because I often change OpenWrt fw images on my second router (which isn't connected anywhere). So I have problem with my routes when I'm connected to my wlan and want to connect with Ethernet to my router. Both routers are on 192.168.1.1/24 and after connecting to my Ethernet profile eth0 route becomes default one (which is ok for the time), because of smaller metric I guess. So I'm interested, how can I change routes metric so my applications can be connected to the internet (through out wlan)? Maybe there is solution not to use Default Gateway on Ethernet profile, however I still want to know how to change metric. Or default route if there are more then one.

  Read the article

• After moving our Servers to a virtual environment using VMware - SQL timeouts came in, why?

  - by RayofCommand

  We moved our servers to a virtual cloud (VMware) where only our servers are in. But as soon as we finished migrating everything we are fighting against SQL Timeouts and machine slowdowns we can't explain. Even though we ~ doubled the servers capacity while switching from physical to virtual. Now I googled and found that we are not alone. People are complaining about poor performance after moving to a cloud managed by VMware. Are there any known issues? Sometimes our services can't access a disk or SQL receives a timeout and we have no idea why.

  Read the article

• Windows 8 switch user is very slow

  - by Chris Weber

  I recently upgraded to Windows 8 from Windows 7. One major annoyance is how slow the "switch user" command is. In Windows 7 switching users was fairly fast. I've got an SSD drive with pretty good hardware, so I'm suspecting it's something with Windows 8, either a defect, or the fact that I upgraded from Windows 7 instead of doing a clean install. Anybody have this problem? My wife is complaining enough about Windows 8 and this is one of the biggest complaints.

  Read the article

• What can cause a black or blank screen when pressing logout or switch user in windows 7

  - by Medran

  The situation I have here is related to a brand new dell machine with a GTX260 video card. Put simply after one user logs in when that user either 'switch users' or 'logs out' windows goes to a black/blank screen. The TV screen that is used with this computer previously functioned fine with fast user switching on an XP machine. The new computer is windows 7. The TV is not outputting any error messages like 'no signal' or anything else that would be displayed if the computer was off. You can fix the problem by cycling the input on television, after cycling the input the welcome screen appears as normal. What I want to know is what on earth is windows doing that would cause the video card to stop sending the same signal to the monitor when the user logs off or switches users. I mean as far as I can tell the resolution is identical between windows and the welcome screen. Or perhaps if somebody has experienced this before a fix would be great too.

  Read the article

• Proxy between data centers [closed]

  - by dstarh

  Possible Duplicate: Can IIS be configure to forward request to another web server? We are switching data centers (actually datac-center to EC2 to be specific) and some customers have not yet made DNS changes to point the domains to the new load balancers. We are thinking of leaving the existing servers up and just using a proxy server to forward the request to the new load balancer. Can anyone recommend a good proxy server for doing this I've got squid installed but it seems it's fairly easy to just have a fairly wide open proxy server and we don't want this. I want all requests coming in on port 80 to be sent to port 80 at a specific domain (elastic load balancer) the data center env is windows 2k3 and the EC2 env will all be linux but the ec2 env should be irrelevant

  Read the article

• What TLDs should I use for my NS records for redundancy? (DNSSEC support required)

  - by makerofthings7

  Question As a general practice, is it a good idea to use multiple TLDs for the name servers? How should I choose between which TLD would be a good candidate for being the root server for my NS name? More Info I am switching over 800 DNS zones to an outsourced DNS provider. I originally planned on setting the zone names to nsX.company.com, but think it would be best to have multiple TLDs such as .net , .org and .info Since I plan on supporting DNSSec at company.com I think all the 1st tier Name servers must support it as well. Part of the inspiration for this question came from our provider UltraDNS. In their configuration screen for our domains, they actively verify and alert us if our name servers aren't exactly: pdns1.ultradns.net pdns2.ultradns.net pdns3.ultradns.org pdns4.ultradns.org pdns5.ultradna.info pdns6.ultradns.co.uk

  Read the article

• How can I disable the guest account on OSX Lion?

  - by Wezly

  I have 'disabled' the guest account on my macbook pro running Lion via System Preferences Users & Groups. However the guest account still seems to appear as an option to login at start up and when switching users. I have never used the guest account for anything, and I have tried a system restore but the guest user has returned as before. How can I get rid of it? Thanks. edit: I also just enabled and disabled the account again - but the guest option still appears at startup offering a safari only restart for a guest user.

  Read the article

• Sticking with Ubuntu 12.04 while heavily using PPA for newest software updates (Apache 2.4, PHP 5.5)

  - by MechaStorm

  I was wondering whether is it worthwhile to stick with Ubuntu 12.04 LTS until 14.04 comes or should I be switching to just the latest Ubuntu server version 13.10. My server needs are not enterprise heavy and previous thought to keep with LTS was simply to gain the security updates without having to upgrade the servers every couple months. But as we are moving forward with our software development, I have found that alot of the default version of software with 12.04 is way out of the date forcing me to up date via PPA or from source instead of from default apt-get. ie PHP 5.3 is on 12.04, and I'd like to get it to 5.5. Is it worthwhile to simply move to 13.10 in that situation? With the idea to move to 14.04 when it comes?

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

• make a folder/partition on one computer appear as a mass storage device to another?

  - by user137560

  Is there anyway to make a folder or a partition on a computer (Linux or Windows) act like a mass storage device to other computers or devices when connected with a Male-Male USB cable? For example, I have a Windows 7 computer with 2 partitions, C and D. I would then connect that computer to another computer or a Smart TV using a Male-Male USB cable, and the other computer or device recognizes a folder/partition on current computer as a mass storage device. Is this possible? If not, is there any USB switch that can connect an external hard drive or flash drive to both a computer and TV without the need to manually switch them? (I know about some USB switches, but they only support automatic switching with some certain types of printers, not with mass storage)

  Read the article

• Can I sleep one of the displays on a dual-monitor setup? [duplicate]

  - by archedpenguin

  This question already has an answer here: Can I sleep one of the displays on a dual-monitor setup (running Windows 7)? 4 answers I want to be able to 'put the display to sleep' on one of my two monitors when it isn't needed, so it doesn't distract me or use unnecessary power. Ideally, the display would be asleep, but the OS would remain in dual-monitor mode, so I could still have a variety of windows open in the sleeping monitor's display space, which would mean I wouldn't have to keep switching between single- and dual-monitor modes. Its the same as "Can I sleep one of the displays on a dual-monitor setup (running Windows 7)?" I just wasn't sure I could comment on such an old thread. None of the answers there provided a perfect solution and I was wondering if there is now a solution available.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >