Search Results

Search found 2280 results on 92 pages for 'switching'.

Page 43/92 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Citrix ICA Client on Mac shift key doesn't work as expected

  - by brianegge

  When I'm connected to a Windows XP computer from my Mac OS X 10.6 using the Citrix ICA Client, it seems that the shift key only works for the first letter typed after pressing shift. In order to type multiple uppercase letters, like ICA, I must either press caps lock, or press and release shift before each character. I've tried switching between standard and enhanced keyboard, as well as the 'Send Special Keys Unchanged' option, but none of these seem to affect the issue. The problem doesn't occur when I switch from the Citrix window to a regular Mac window.

  Read the article

• Cannot Enter Credentials Over UAC Prompts During Remote Assistance

  - by user100731

  We are using sonicwall firewall device through out our network and we use the sonicwall virtual assistance tool for remote desktop assistance. Since our systems are not in workgroup and are on domain we face problem when the UAC prompts appear. As a work around we edited the UAC policies, such as switching to secure desktop-disable, Allowing UI Acess applications to prompt for elevation without using secure desktop-Enable etc. The ultimate result was we are able to see the UAC prompt on the remote user system but not able to interact with it like we are not able to enter credentials to it even I can see the password being entered if it is done by the local user. However, we cannot interact with UAC prompt window remotely. Is there any solution for this?

  Read the article

• Changing IP every sec with Firefox

  - by Carol

  I looking for ip changer what is faster than PROXY (i tried Elite Proxy Switcher + Firefox add-on, but it's too slow. I set automatic switching to 4 sec and yes he change the ip every 4 sec however it's not enough because it loads pages very slowly.) Secondly I tried the TOR Project but this is not good..because the TOR would be nice and working good however he needs more than 10 seconds, a new identity and it's not to good for me because i want to change my ip lass than 10 sec. So I find the solution. This is IPfucker alias ipFlood (https://addons.mozilla.org/en-us/firefox.../ipflood/) But it does not work on all sites unfortunately...because this is just simulation "Simulate the use of a series of proxy changing at each new connection.". Anyone knows a solution to the problem? Is there an alternative (VPS, Proxy, TOR)? Thanks in advice.

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

• Get source and destination of outbound traffic in pfSense

  - by maxsilver

  I'm looking at the traffic graph in pfSense (Version 1.2.2), which we're using as a router / NAT / ect on our network. Recently, I'm seeing a sudden, constant spike of 15 - 30kbps traffic outbound, that is unusual for our network (normally its below 2kbps, we're mostly all inbound traffic) Is there any way to determine what the source of this traffic is, or where it's going? (Just an internal IP address for source, and external IP address for destination would be all I need) I've already tried switching the traffic graph to 'LAN' and watching the host list on the right side, but it seems ... flakey. The numbers it shows seem to fade in and out at random, and the values never add up to anywhere near the graph values. I'm not allowed to post the image, but a photo is available at - http://imgur.com/QYjKI.png

  Read the article

• Can VMWare Workstation 7.x and Sun VirtualBox 3.1.x co-exist on the same Windows 7 64bit Host togeth

  - by Heston T. Holtmann

  Will installing Sun Virtual Box bash or interfere with my VMWare installtion? I don't need to run VMs from both Virtual-Machine software packages at the same time but I do need to run some older Virtual-Machines from Sun-Virtualbox on the same 64-bit Windows 7 host until I can migrate those VMs to VMWare. Before switching from Linux host to Windows host, I ensured to export the VirtualBox VM to an OVF "appliance" with intentions of importing into VMWare Workstation 7. But VMWare gives me an error stating it can't import it. Background info My old workstation host: 32-bit Ubuntu 9.04 running Sun Virtual Box 3.x hosting Windows-XP VM Guest for Windows Software app development (VS2008, etc) Needs I need to get my original Sun-VBox Windows-XP Guest running on my new Windows 7 Workstation either imported into VMWare or running on the Windows version of Sun-Virtual box (I have the VM-Guest Backed up and copied to the new computer data drive. New workstation host: 64bit Windows 7 running VMWare Workstation 7 to host 32bit Ubuntu 9.10 for linux project work.

  Read the article

• taskbar-free window manager

  - by 7vies

  I'm looking for a window manager that is not based on the "standard" taskbar (which I find a poor idea and I'm completely tired of). I'm aware of tiling window managers and improvements in last versions of operating systems, but I can't find what I need. I suppose that any window takes the whole screen (or can be tiled), and I imagine switching between windows like that: on a hotkey or mouse hot zone the screen becomes a task switcher where tasks are organized in a somewhat convenient manner. Well, it's a bit like a taskbar with autohide, but I think there could be some more convenient ideas than simply stacking icons and descriptions... It is also supposed to be lightweight enough, for example to run on a netbook. Any suggestions?

  Read the article

• Windows 7 resizes desktop when I switch of a monitor

  - by Stijn Sanders

  I have a workstation with two monitors and the desktop extended over them. I have a lot of applications open (generally maximized), and I have a personal preference which application is on which monitor (let's say editors on the right, data retrieval and display on the left). I have recently upgraded to a workstation with Windows 7 and when I power off a monitor (typically when going home at the end of the day), the desktop-expand-over-monitors disables and all applications are switched to the main monitor. (Also the taskbar I keep on the left resizes to about one icon's width.) This is highly annoying, since I now spend the first minutes of work each day switching the applications back that were on the monitor on the right. Is there a way to prevent this? (It says no here.) Is there software I could install that can prevent this?

  Read the article

• Ubuntu login takes 15 seconds, "I/O error dev fd0 sector 0"

  - by Dan

  After upgrading to Ubuntu 10.04, when I first login it takes 10+ seconds where it just sits at the gdm backgroup before taking me to gnome. By switching to a terminal window during this 10 seconds I saw the error message "I/O error /dev/fd0 sector 0" being outputted. I assume this has to do with the floppy drive... but I don't even have a floppy drive! How do I disable this device and make this error message go away (and hopefully fix the long wait)? Thanks.

  Read the article

• FTP issue - VSFTPd and connecting to from FileZilla

  - by B Tyndall

  I'm trying to connect to a CentOS Linux box that I have hosted on EC2 and I think I have everything configured correctly but when I try to connect I get this series of messages Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.0.5) Command: USER tyndall Response: 331 Please specify the password. Command: PASS ********* Response: 230 Login successful. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/tyndall" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing Not sure where to start troubleshooting this issue. Any ideas? Do I need to change any permissions? I would think this ID has the ability to see my own home directory. I am able to push/pull files from the command line version of FTP client working on Windows.

  Read the article

• FTP transfer timeouts while uploading small files

  - by Hamed Momeni

  I have this problem that when I need to transfer some files (mostly small files < 100KB) the connections time out. Well actually it uploads one file and it fails on the next until my client reconnects to the server and the same thing happens over and over again. I googled the problem and some said that switching from passive mode to active mode could solve the it but it didn't work for me. Even continuously pinging the server to keep the connection alive was to no avail. P.S. I have root access to the server. Update: I'm running ProFTPD on a CentOS vps. I tried a few clients (FireFTP, FileZilla) all having the same problem.

  Read the article

• Hide taskbar labels without combining

  - by Domchi

  There are three options for customizing taskbar buttons in Windows 7: Always combine, hide labels Combine when taskbar is full Never combine Is there any way to hide labels and not combine taskbar buttons? Or even better, to exclude only certain applications from combining? My main problem is that I switch a lot between two instances of a single application, and having to hover over combined icon and then choosing the correct one. Alt-Tabbing is not a good alternative when I'm switching between more than three applications; clicking on taskbar only once is what I'm looking for.

  Read the article

• Option and command keys in OSX are swapped and keyboard preferences do not set them back.

  - by bikesandcode

  On my MacBook pro, I occasionally use external keyboards, generally Windows ones and things have been fine. Yesterday, I plugged in a new one, remapped the command/option keys so the windows/alt keys were in the same configuration, again, nothing new here. However, this time when I unplugged the USB keyboard, the laptops option/command keys remained switched. More annoying is that if I go into the System Preferences - Keyboards - Modifier keys, remapping the keys to actions does not work. I can use the drop downs to disable any specific keys, but switching the behaviours does nothing. (Cmd/Option obvious, tried remapping anything to caps lock and a few other combinations, no joy. Restore defaults set the configuration to what I'd expect, but the settings are evidently ignored.) So: Any ideas?

  Read the article

• Vim: How to create autocomplete/chooser from entries in buffer?

  - by Doug Avery

  Found out today that if you press Ctrl-Opt-Cmd-V in Textmate, it produces a cute little "chooser" dialogue in-place that allows you to page through your recent clipboard entries. It looks very similar to how CTRL-P and -N work in VIM, except it shows whole lines instead of simple word objects. It seems like this would be doable in VIM — it already has a buffer full of entries (the YankRing buffer, for example), and it already has a chooser, but I can't think of where I'd look to start putting these two together. Any ideas? (I know that YankRing already does this by opening a new window full of buffer content, but I wonder if there's a way to do it without all the window switching/closing/etc)

  Read the article

• Gentoo Linux -> Ubuntu: Can I Preserve My LVM/RAID Devices, Or Do I Need To Reformat?

  - by Eddie Parker

  Hello: I've got a Gentoo box that I'm interested in switching over to an Ubuntu box. I currently have the partitions laid out using a mixture of RAID (mdadm) and LVM2, as specified in this document [1]. Ideally I'd like to just wipe out the non /home partition, as it's got data I'd like to keep. Is it possible to reuse the current setup, or do I need to restart? vgdisplay, vgchange -a y, etc don't yield any results from the Ubuntu LiveCD, and I'm wary to run any commands that might wipe my data. Your help would be appreciated. [1] http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml

  Read the article

• IBM PS/2 Keyboard with OS X 10.6 and PS2->USB Converter

  - by public static void

  Just got a new Mac Pro at work and as I can't stand the ZX Spectrum-esque 'dead flies' feel of the new Apple keyboards, I brought my trusty IBM SpaceSaver II to the office (with a USB/PS2 adapter) All seems generally to work ok - even the Trackpoint 'nipple' but periodically the modifier keys, notably the Ctrl and Windows keys seem to go into 'sticky' mode so that typing an 'S' brings up the save dialog, 'O' = open dialog etc. etc. Its generally fixed by switching windows and then returning back to the offending one, but this is really beginning to cheese me off. Can anyone suggest a fix?

  Read the article

• Sharing a wifi connection between different user profiles on Windows XP

  - by crowne

  I've set-up two separate user profiles on an old laptop running Windows-XP, and noted the following strange behaviour. When the wireless network is setup using WEP both user profiles can connect to the internet and I can switch between user profiles, without network connectivity issues. However when I changed the wireless security to WPA2, the first user to connect gets access to the internet, when switching to the second profile the connection fails. The behaviour is the same regardless of which of the two profiles logs on first. I also tried this with one user with admin rights and one without, and got the same result. I'm not too concerned about a fix for this other than forcing the users to log-off when sharing the laptop, but I'd be interested to know if anyone can corroborate my findings. The network config was done using Intel® PROSet/Wireless.

  Read the article

• Cmd+Less Than (10.8.2) not working after Xcode (4.5.x) installed

  - by Felix Lieb

  I had to reinstall my MBP recently. I stress Cmd+Less Than a lot for switching between Xcode's main window and the Organizer for documentation. The standard OSX-shortcut for doing that is Cmd + Less Than. After installing Xcode it didn't work any longer. I saw, that Xcode uses Cmd+LT for "Edit Schemes", a rarely used option. Even after deleting the shortcut for "Edit Schemes" in Xcode, Cmd+LT didn't work. How can I get Cmd + Less Than to work again? Mac OS X Mount Lion 10.8.2 Xcode 4.5.2 I have less than 10 reputation on superuser (acutally first post here), so I can't post the answer to my question. Would yo be so kind and upvote this question, so I can officially answer the question? The question, as well as the answer is only correct, if you use German keyboard layout.

  Read the article

• Cannot move Google Chrome tabs to different monitor in ubuntu

  - by Moses

  When I use Chrome in Windows, I can grab a tab and drag it over to my second monitor and it will automatically maximize. In ubuntu, when I try to do the same, the tab will snap back to my primary monitor and maximize there. There is a related bug report for Chromium that is labeled "fixed" here, but when I try using Chromium instead of Chrome, I get the same behavior (not what I called fixed). So far the only other thing I've tried is changing themes, resetting Chrome's settings to default and tested Chromium as I pointed out above. I've also tried installing Chrome from a live Linux disc, and the behavior is still the same. The issue does not occur with Firefox, but I need to use Chrome for work-related reasons, so simply switching isn't really an option personally (though it is a viable workaround). I'm using Chrome 30 and ubuntu 13.04. Does anyone have any solutions?

  Read the article

• Easily tell if focused on VirtualBox window?

  - by Benjamin Oakes

  Is there a way to make it very obvious that my VirtualBox window isn't in focus? The problem I'm having is switching between workspaces on Ubuntu or OS X and then trying to type in my Windows virtual machine, only to find that it's not in focus. The Windows window looks like it's in focus (based on the title bar), but I'm actually typing in Firefox on the host machine, for example. It's even worse because the Windows text insertion cursor is blinking to show focus. Ideally, I'd like the VM's display to get unsaturated (e.g. a "partial" grayscale) when not in focus, just to prevent this keyboard-focus problem. Other options would be fine too, as long as I don't have to second guess where my focus is. I'm not using the seamless mode -- the display is all within a window.

  Read the article

• Debian 5 is randomly shutting down.

  - by revofreak

  My debian 5 vps is suffering from random shutdowns. I reinstalled it several times, the hosts moved me to a different physical box, check the install image and said everyone else also uses it and is fine. Heres the output from syslog Mar 27 00:19:19 noobintraining-1 -- MARK -- Mar 27 00:32:01 noobintraining-1 shutdown[18142]: shutting down for system halt Mar 27 00:32:06 noobintraining-1 init: Switching to runlevel: 0 Mar 27 00:32:06 noobintraining-1 xinetd[15907]: Exiting... Mar 27 00:32:07 noobintraining-1 named[15865]: received control channel command 'stop -p' Mar 27 00:32:07 noobintraining-1 named[15865]: shutting down: flushing changes Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on 127.0.0.1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: stopping command channel on ::1#953 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on ::#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 127.0.0.1#53 Mar 27 00:32:07 noobintraining-1 named[15865]: no longer listening on 89.238.172.132#53 Mar 27 00:32:07 noobintraining-1 named[15865]: exiting Mar 27 00:32:07 noobintraining-1 exiting on signal 15 Any help is most appreciated!

  Read the article

• I have nice headphones. Need a wireless USB microphone so I don't have to switch to a headset to make a call

  - by mattalexx

  Right now, I have a pair of Sennheiser HD595 headphones. They are plugged into a DAC/headphone amp. I spend all day listening to music through them and they sound awesome. Then, for making calls, I have a wireless USB headset from Logitech. Problem is, I can't make calls when I'm wearing my Sennheisers but I wouldn't want to listen to music all day using the Logitech headset. So I spend my day switching in between. So the question is, how can I make calls while wearing the headphones of my choice? One thing I thought of is a wireless USB microphone that I can clip to the Sennheisers. So I'd wear the Sennheisers with this mic all day and ditch the Logitech headset. But it doesn't look like anyone makes a microphone like this. By the way, I would love if the solution didn't transmit the sound of my clacky keyboard or noisy wood flooring.

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Ubuntu: move logs from /dev/tty8 to different terminal /dev/tty12 or get rid of it.

  - by Casual Coder

  I want to know how to move or get rid of /dev/tty8 log output in Ubuntu 9.10. /dev/tty7 is my regular X session. When I am switching user to test account where I can try and test setups and configs I am at next available console i.e. /dev/tty9 because /dev/tty8 is taken by log output. Where can I configure this ? All I've found related to /dev/tty8 is commented lines in /etc/rsyslog.d/50-default.conf. I changed it like that: daemon,mail.*;\ news.=crit;news.=err;news.=notice;\ *.=debug;*.=info;\ *.=notice;*.=warn /dev/tty12 And I've got nice log output on /dev/tty12 but where is configuration for log output on /dev/tty8. How can I change it?

  Read the article

• master-slave-slave replication: master will become bottleneck for writes

  - by JMW

  hi, the mysql database has arround 2TB of data. i have a master-slave-slave replication running. the application that uses the database does read (SELECT) queries just on one of the 2 slaves and write (DELETE/INSERT/UPDATE) queries on the master. the application does way more reads, than writes. if we have a problem with the read (SELECT) queries, we can just add another slave database and tell the application, that there is another salve. so it scales well... Currently, the master is running arround 40% disk io due to the writes. So i'm thinking about how to scale the the database in the future. Because one day the master will be overloaded. What could be a solution there? maybe mysql cluster? if so, are there any pitfalls or limitations in switching the database to ndb? thanks a lot in advance... :)

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >