Search Results

Search found 13415 results on 537 pages for 'variable caching'.

Page 473/537 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• fopen / fopen_s and writing to files

  - by yCalleecharan

  Hi, I'm using fopen in C to write the output to a text file. The function declaration is (where ARRAY_SIZE has been defined earlier): void create_out_file(char file_name[],long double *z1){ FILE *out; int i; if((out = fopen(file_name, "w+")) == NULL){ fprintf(stderr, "* Open error on output file %s", file_name); exit(-1); } for(i = 0; i < ARRAY_SIZE; i++) fprintf(out, "%.16Le\n", z1[i]); fclose(out); } My questions: On compilation with MVS2008 I get the warning: warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. I haven't see much information on fopen_s so that I can change my code. Any suggestions? Can one instruct fprintf to write at desired precision? If I'm using long double then I assume that my answers are good till 15 digits after the decimal point. Am I right? Thanks a lot...

  Read the article

• Easiest way to remove Keys from a 2D Array?

  - by dbemerlin

  Hi, I have an Array that looks like this: array( 0 => array( 'key1' => 'a', 'key2' => 'b', 'key3' => 'c' ), 1 => array( 'key1' => 'c', 'key2' => 'b', 'key3' => 'a' ), ... ) I need a function to get an array containing just a (variable) number of keys, i.e. reduce_array(array('key1', 'key3')); should return: array( 0 => array( 'key1' => 'a', 'key3' => 'c' ), 1 => array( 'key1' => 'c', 'key3' => 'a' ), ... ) What is the easiest way to do this? If possible without any additional helper function like array_filter or array_map as my coworkers already complain about me using too many functions. The source array will always have the given keys so it's not required to check for existance. Bonus points if the values are unique (the keys will always be related to each other, meaning that if key1 has value a then the other key(s) will always have value b). My current solution which works but is quite clumsy (even the name is horrible but can't find a better one): function get_unique_values_from_array_by_keys(array $array, array $keys) { $result = array(); $found = array(); if (count($keys) > 0) { foreach ($array as $item) { if (in_array($item[$keys[0]], $found)) continue; array_push($found, $item[$keys[0]]); $result_item = array(); foreach ($keys as $key) { $result_item[$key] = $item[$key]; } array_push($result, $result_item); } } return $result; } Addition: PHP Version is 5.1.6.

  Read the article

• Basic C programming question

  - by Amit

  Hi all, I've just started to learn C and it's going pretty slow...I wanted to write a program that takes in an integer argument and returns it's doubled value (aka take in integer, multiply by 2, and printf that value). I purposely did not want to use the scanf function. Here's what I have so far and what is not compiling... #include <stdio.h> int main(int index) { if (!(index)) { printf("No index given"); return 1; } a = index*2; printf("Mult by 2 %d",a); return 0; } So basically when the program is executed I want to supply the index integer. So, in cygwin, I would write something like ./a 10 and 10 would be stored into the index variable. Also, I want to program to return "No index given" and exit if no index value was supplied... Anyone care to help what I'm doing wrong? EDIT: This code returns 1 error upon compilation and is based on the help by @James: #include <stdio.h> int main(int 1, char index) { int index, a; if (!(index)) { printf("No index given"); return 1; } a = index*2; printf("Mult by 2 %d",a); return 0; } Thanks! Amit

  Read the article

• Why does animate not work for the first few 'selections' of my next button?

  - by Josiah

  I'll just start right off the bat and say I'm fairly new to JQuery, so if you see some glaring issues with my code....let me know what I'm doing wrong! Either way, I've been working on a script to fade divs in and out using the z-index and animate. It "works" after about 2-3 clicks, but the first two clicks do not fade or animate as I was hoping....why is that? I'll just throw javascript up here, but if you need/want more code, just let me know. Thanks! $(document).ready(function() { //Slide rotation/movement variables var first = $('#main div.slide:first').attr('title'); var last = $('#main div.slide').length; //Needed for the next/prev buttons var next; //Set the first div to the front, and variable for first div var $active = $('#main div.slide[title='+first+']'); //Hide the links until the div is hovered over and take them away when mouse leaves $('#main').children('a').hide(); $('#main').mouseenter(function() { $('#main').children('a').fadeIn(750); }).mouseleave(function() { $('#main').children('a').fadeOut(750); }); $active.css('z-index', '4'); $('#main #next').click(function() { if ((next = parseInt($active.attr('title')) + 1) > last) { next = 1; } $active.css('z-index', '0').stop().animate({opacity: 0}, 1000); $active = $('#main div[title='+next+']').css('z-index', '4').stop().animate({opacity : 1}, 1000); }); });

  Read the article

• Simple average calculation

  - by sasquatch90

  I'm trying to write program calculating average of given numbers stored in an array. Amount of numbers should be not more than 100, and user should input them until a !int variable is given : #include <iostream> #include <conio.h> using namespace std; double average(int tab[], int i){ int sum=0; for(int j=0; j<i; ++j){ sum+=tab[j]; } return (double)sum/i; } int main() { int tab[100]; int n=0; int number=0; do { if(n < 100){ cout << "Give " << n+1 << " number : "; cin >> number; tab[n]=number; number=0; ++n; } else{ break; } } while( !isdigit(number) ); cout << average(tab, n) << endl; getch(); return 0; } Why after giving char, it prints me 'Give n number:' for all empty cells of my array ? It should end and use only given numbers.

  Read the article

• Managing StringBuilder Resources

  - by Jim Fell

  My C# (.NET 2.0) application has a StringBuilder variable with a capacity of 2.5MB. Obviously, I do not want to copy such a large buffer to a larger buffer space every time it fills. By that point, there is so much data in the buffer anyways, removing the older data is a viable option. Can anyone see any obvious problems with how I'm doing this (i.e. am I introducing more performance problems than I'm solving), or does it look okay? tText_c = new StringBuilder(2500000, 2500000); private void AppendToText(string text) { if (tText_c.Length * 100 / tText_c.Capacity > 95) { tText_c.Remove(0, tText_c.Length / 2); } tText_c.Append(text); } EDIT: Additional information: In this application new data is received very rapidly (on the order of milliseconds) through a serial connection. I don't want to populate the multiline textbox with this new information so frequently because that kills the performance of the application, so I'm saving it to a StringBuilder. Every so often, the application copies the contents of the StringBuilder to the textbox and wipes out the StringBuilder contents.

  Read the article

• I cannot make log4net work in my web application :(

  - by vtortola

  Hi, I'm trying to set up log4net but I cannot make it work. I've put this in my Web.config: <configSections> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" /> <appender name="RollingFileAppender" type="log4net.Appender.RollingFileAppender"> <file value="logfile.log" /> <appendToFile value="true" /> <rollingStyle value="Composite" /> <maxSizeRollBackups value="14" /> <maximumFileSize value="15000KB" /> <datePattern value="yyyyMMdd" /> <layout type="log4net.Layout.PatternLayout"> <conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" /> </layout> </appender> <root> <level value="DEBUG" /> <appender-ref ref="RollingFileAppender" /> <appender-ref ref="TraceAppender" /> </root> (StackOverflow is not rendering correctly the code I've pasted, I don't know why) Then, in my code I execute: log4net.Config.XmlConfigurator.Configure(new FileInfo(HttpContext.Current.Server.MapPath("~/Web.config"))); ILog log = LogManager.GetLogger("MainLogger"); if(log.IsDebugEnabled) log.Debug("lalala"); But nothing happen. I check the "log" variable, and contains an LogImpl object, that has all the logging levels enabled. I get no error or configuration warning, I cannot see any file in the root, in the bin or anywhere. What do I have to do to make it work? Cheers.

  Read the article

• How to duplicate all data in a table except for a single column that should be changed.

  - by twiga

  I have a question regarding a unified insert query against tables with different data structures (Oracle). Let me elaborate with an example: tb_customers ( id NUMBER(3), name VARCHAR2(40), archive_id NUMBER(3) ) tb_suppliers ( id NUMBER(3), name VARCHAR2(40), contact VARCHAR2(40), xxx, xxx, archive_id NUMBER(3) ) The only column that is present in all tables is [archive_id]. The plan is to create a new archive of the dataset by copying (duplicating) all records to a different database partition and incrementing the archive_id for those records accordingly. [archive_id] is always part of the primary key. My problem is with select statements to do the actual duplication of the data. Because the columns are variable, I am struggling to come up with a unified select statement that will copy the data and update the archive_id. One solution (that works), is to iterate over all the tables in a stored procedure and do a: CREATE TABLE temp as (SELECT * from ORIGINAL_TABLE); UPDATE temp SET archive_id=something; INSERT INTO temp (select * from temp); DROP TABLE temp; I do not like this solution very much as the DDL commands muck up all restore points. Does anyone else have any solution?

  Read the article

• ActionScript shiftKey Not Working In Full Screen Mode?

  - by Chunk1978

  i've drawn an ellipse sprite and added it to the display list of a container, which is added to the display list of the stage. to move the sprites with the keyboard arrows, it appears that my shiftModifier:Number variable is not working when the stage's display state is set to full screen. shiftModifier works as it should when the stage's display state is set to Normal. stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyboardDown); function onKeyboardDown(evt:KeyboardEvent):void { var shiftModifier:Number = 0.25; if (evt.shiftKey) {shiftModifier = 10;} if (evt.keyCode == Keyboard.UP) {ellipse1.y -= shiftModifier;} if (evt.keyCode == Keyboard.DOWN) {ellipse1.y += shiftModifier;} if (evt.keyCode == Keyboard.LEFT) {ellipse1.x -= shiftModifier;} if (evt.keyCode == Keyboard.RIGHT) {ellipse1.x += shiftModifier;} } fsm.addEventListener(MouseEvent.CLICK, toggleFullScreenMode); function toggleFullScreenMode(evt:MouseEvent):void { if (stage.displayState == StageDisplayState.FULL_SCREEN) {stage.displayState = StageDisplayState.NORMAL;} else {stage.displayState = StageDisplayState.FULL_SCREEN;} } full screen is tested in Safari and Firefox.

  Read the article

• jquery find() - how to exclude certain descendants, and their children?

  - by jammypeach

  I have markup similar to this: <div class='wrapper plugin'> //some content <div class='child-wrapper plugin'> //some more content <div> <ul> <li><div class='cliky'>clicky!</div></li> </ul> </div> </div> <div class='cliky'>clicky!</div> </div> I need to be able to select the first .clicky div only, not any .clicky divs inside a .plugin > .plugin div. The wrapper has .plugin class too - might seem counter-intuitive so another way to view it is this: I want to get the .clicky children of a given .plugin div, but not .plugin .plugin .clicky. Here's the problem - the depth of each .clicky element (or indeed, the number of them) is unknown and variable in relation to the wrappers. One could be immediately below the first wrapper, or inside 10 <ul>s. I've tried selectors like: $('.wrapper').find('.clicky').not('.plugin > .clicky'); But they still selected child .clicky. How would I be able to filter out .plugin and any children of .plugin from my selector before using find()?

  Read the article

• Glassfish 3: How do I get and use a developers build so I can navigate a stack trace including Glas

  - by Thorbjørn Ravn Andersen

  I am migrating a JSF 1.1 application to JEE 6 Web profile, and doing it in steps. I am in the process of moving from JSP with JSF 1.1 to Facelets under JSF 1.2 using the jsf-facelets.jar for JSF 1.2, and received an "interesting" stack trace when trying to lookup a key in a Map using a "{Bean.foo.map.key}" where the stacktrace complained about "key" not being a valid integer. (After code introspection I am workarounding it using a number as the key). That bug is not what this question is about. In such a situation it is essential to be able to navigate the source of every line in the stack trace. In Eclipse I normally attach a source jar to every jar on the build path, but in this particular case the Glassfish server adapter creates a library automatically containing the jars. Also there is to my knowledge no debug build of Glassfish where sources are included in the bundle. Glassfish is a non-trivial Maven project, and a bit picky too. I am not very familiar with maven, but have managed to checkout the code from Subversion and build it for the 3.0 tag according to http://wiki.glassfish.java.net/Wiki.jsp?page=V3FullBuildInstructions#section-V3FullBuildInstructions-CheckoutTheWorkspace - it appears to be the code corresponding to the official released 3.0 version. After finishing the "mvn -U install" part, I have then tried to create Eclipse projects by first using "mvn -DdownloadSources=true eclipse:eclipse" and then import them in Eclipse JEE 3.5.2 and specifying the M2_REPO variable but many of the projects still have compilation errors, and I cannot locate any instructions from Oracle about how to do this. I'd appreciate some help in just getting a functional IDE workspace reflecting the 3.0 version of Glassfish. I have Eclipse 3.5.2, Netbeans 6.8 and 6.9 beta, and IntelliJ IDEA 9, and Linux/Windows/OS X do do it on.

  Read the article

• How to achieve interaction between GUI class with logic class

  - by volting

  Im new to GUI programming, and haven't done much OOP. Im working on a basic calculator app to help me learn GUI design and to brush up on OOP. I understand that anything GUI related should be kept seperate from the logic, but Im unsure how to implement interaction between logic an GUI classes when needed i.e. basically passing variables back and forth... Im using TKinter and when I pass a tkinter variable to my logic it only seems to hold the string PY_VAR0. def on_equal_btn_click(self): self.entryVariable.set(self.entryVariable.get() + "=") calculator = Calc(self.entryVariable) self.entryVariable.set(calculator.calculate()) Im sure that im probably doing something fundamentally wrong and probabaly really stupid, I spent a considerable amount of time experimenting (and searching for answers online) but Im getting no where. Any help would be appreciated. Thanks, V The Full Program (well just enough to show the structure..) import Tkinter class Gui(Tkinter.Tk): def __init__(self,parent): Tkinter.Tk.__init__(self,parent) self.parent = parent self.initialize() def initialize(self): self.grid() self.create_widgets() """ grid config """ #self.grid_columnconfigure(0,weight=1,pad=0) self.resizable(False, False) def create_widgets(self): """row 0 of grid""" """Create Text Entry Box""" self.entryVariable = Tkinter.StringVar() self.entry = Tkinter.Entry(self,width=30,textvariable=self.entryVariable) self.entry.grid(column=0,row=0, columnspan = 3 ) self.entry.bind("<Return>", self.on_press_enter) """create equal button""" equal_btn = Tkinter.Button(self,text="=",width=4,command=self.on_equal_btn_click) equal_btn.grid(column=3, row=0) """row 1 of grid""" """create number 1 button""" number1_btn = Tkinter.Button(self,text="1",width=8,command=self.on_number1_btn_click) number1_btn.grid(column=0, row=1) . . . def on_equal_btn_click(self): self.entryVariable.set(self.entryVariable.get() + "=") calculator = Calc(self.entryVariable) self.entryVariable.set(calculator.calculate()) class Calc(): def __init__(self, equation): self.equation = equation def calculate(self): #TODO: parse string and calculate... return self.equation if __name__ == "__main__": app = Gui(None) app.title('Calculator') app.mainloop()

  Read the article

• Access to map data

  - by herzl shemuelian

  I have a complex map that defined typedef short short1 typedef short short2 typedef map<short1,short2> data_list; typedef map<string,list> table_list; I have a class that fill table_list class GroupingClass { table_list m_table_list; string Buildkey(OD e1){ string ostring; ostring+=string(e1.m_Date,sizeof(Date)); ostring+=string(e1.m_CT,sizeof(CT)); ostring+=string(e1.m_PT,sizeof(PT)); return ostring; } void operator() (const map<short1,short2>::value_type& myPair) { OptionsDefine e1=myPair.second; string key=Buildkey(e1); m_table_list[key][e1.m_short2]=e1.m_short2; } operator table_list() { return m_table_list; } }; and I use it by table_list TL2 GroupingClass gc; TL2=for_each(mapOD.begin(), mapOD.end(), gc); but when I try to access to internal map I have problems for example data_list tmp; tmp=TL2["AAAA"]; short i=tmp[1]; //I dont update i variable but if i use a loop by itrator this work properly why this no work at first way thanks herzl

  Read the article

• PHP.ini Settings Are Ignored By PHP5.3.5 Running With Windows 7 And Apache 2.2.15

  - by Andy

  I did an install of PHP5.3.5 on Windows 7 Home Premium using the MSI installer download. I got it to overwrite a previous version of PHP5 in C:\php5\ When first testing it, the server failed to start. I fixed this by adding the path to PHP in the Apache2.2 httpd file where the installer had inserted 2 lines of coded pointing to the ini file directory and the PHP DLL but had left out the directory path. After doing this, the server starts ok and I can run phpinfo to view the PHP settings in my web browser on local host. In the phpinfo it states that the loaded configuration file is C:\php5\php.ini as expected. But if I make any changes to the settings, and reboot the server, none of the changes are reflected in phpinfo. Yes, I do refresh the browser window. If I rename the php.ini to something else to make it invisible phpinfo then correctly identifies that there is no php.ini file loaded. So the settings in php.ini are being ignored and some default settings are being used (but I have no idea where these are derived from). As far as I can tell, there are no other php.ini files on my computer. In phpinfo it states that the Configuration File (php.ini) Path is C:\Windows but this is the same as on a Windows XP computer that I work on. And in the windows folder I don't see any php.ini file. In the windows registry, there is no mention of PHP5, and the PATH environment variable starts with C:\php5\; So hopefully someone can suggest how I can get PHP5 to take notice of the C:\php5\php.ini settings. :)

  Read the article

• Why doesn't this PHP execute?

  - by cam

  I copied the code from this site exactly: http://davidwalsh.name/web-service-php-mysql-xml-json as follows, /* require the user as the parameter */ if(isset($_GET['user']) && intval($_GET['user'])) { /* soak in the passed variable or set our own */ $number_of_posts = isset($_GET['num']) ? intval($_GET['num']) : 10; //10 is the default $format = strtolower($_GET['format']) == 'json' ? 'json' : 'xml'; //xml is the default $user_id = intval($_GET['user']); //no default /* connect to the db */ $link = mysql_connect('localhost','username','password') or die('Cannot connect to the DB'); mysql_select_db('db_name',$link) or die('Cannot select the DB'); /* grab the posts from the db */ $query = "SELECT post_title, guid FROM wp_posts WHERE post_author = $user_id AND post_status = 'publish' ORDER BY ID DESC LIMIT $number_of_posts"; $result = mysql_query($query,$link) or die('Errant query: '.$query); /* create one master array of the records */ $posts = array(); if(mysql_num_rows($result)) { while($post = mysql_fetch_assoc($result)) { $posts[] = array('post'=>$post); } } /* output in necessary format */ if($format == 'json') { header('Content-type: application/json'); echo json_encode(array('posts'=>$posts)); } else { header('Content-type: text/xml'); echo '<posts>'; foreach($posts as $index => $post) { if(is_array($post)) { foreach($post as $key => $value) { echo '<',$key,'>'; if(is_array($value)) { foreach($value as $tag => $val) { echo '<',$tag,'>',htmlentities($val),'</',$tag,'>'; } } echo '</',$key,'>'; } } } echo '</posts>'; } /* disconnect from the db */ @mysql_close($link); } And the php doesn't execute, it just displays as plain text. What's the dealio? The host supports PHP, I use it to run a Wordpress blog and other things.

  Read the article

• php array split

  - by Rahul Mehta

  I am passing the space separated value to in input and split this in operation and make an array. givecard 442 ashutosh2 Y But i want to pass the message in this string and want to split as complete message in operation or output. givecard 442 ashutosh2 Y hi how are you if i split this line than i get the result is Array ( [0] => givecard [1] => 442 [2] => ashutosh2 [3] => Y [4] => hi [5] => how [6] => are [7] => you ) But i want like this Array ( [0] => givecard [1] => 442 [2] => ashutosh2 [3] => Y [4] => hi how are you ) as here hi how are you i want to extract as complete one message in a variable . How can i achieve this

  Read the article

• How do I set the LRECL in C#.NET?

  - by donde

  I have been trying to ftp a dtl file from .net to, what I beleive, is an AS400. The error being reported back to me is: "One or more lines have been truncated" and the admin is saying the file is coming over with 256 lines that have variable length columns. I found this explanation online: we have to establish defaults because no specifics about the file exist. The default RECFM is V and LRECL is 256. This means that SAS will scan the input record looking for the CR & LF to tell us that we are at the EOR. If the marker isn't found within the limit of the LRECL, SAS discards the data from the LRECL value to the end of the record and adds a message to the Log that "One or more lines have been truncated". So I need to set the LRECL. How do I do this in C# .NET? FtpWebRequest ftp = (FtpWebRequest)FtpWebRequest.Create(ftpfullpath); ftp.Credentials = new NetworkCredential(user, pwd); ftp.KeepAlive = false; ftp.UseBinary = false; ftp.Method = WebRequestMethods.Ftp.UploadFile; FileStream fs = File.OpenRead(inputfilepath + ftpfileName); byte[] buffer = new byte[fs.Length]; fs.Read(buffer, 0, buffer.Length); fs.Close(); Stream ftpstream = ftp.GetRequestStream(); int i = 0; int intBlock = 1786; int intBuffLeft = buffer.Length; while (i < buffer.Length) { if (intBuffLeft >= 1786) { ftpstream.Write(buffer, i, intBlock); } else { ftpstream.Write(buffer, i, intBuffLeft); } i += intBlock; intBuffLeft -= 1786; } ftpstream.Close();

  Read the article

• Is this linear search implementation actually useful?

  - by Helper Method

  In Matters Computational I found this interesting linear search implementation (it's actually my Java implementation ;-)): public static int linearSearch(int[] a, int key) { int high = a.length - 1; int tmp = a[high]; // put a sentinel at the end of the array a[high] = key; int i = 0; while (a[i] != key) { i++; } // restore original value a[high] = tmp; if (i == high && key != tmp) { return NOT_CONTAINED; } return i; } It basically uses a sentinel, which is the searched for value, so that you always find the value and don't have to check for array boundaries. The last element is stored in a temp variable, and then the sentinel is placed at the last position. When the value is found (remember, it is always found due to the sentinel), the original element is restored and the index is checked if it represents the last index and is unequal to the searched for value. If that's the case, -1 (NOT_CONTAINED) is returned, otherwise the index. While I found this implementation really clever, I wonder if it is actually useful. For small arrays, it seems to be always slower, and for large arrays it only seems to be faster when the value is not found. Any ideas?

  Read the article

• Help dealing with data dependency between two registration forms

  - by franko75

  I have a tricky issue here with a registration of both a user and his/her pet. Both the user and the pet are treated as separate entities and both require separate registration forms. However, the user's pet has to be linked to the user via a foreign key in the database. The process is basically that when a new user joins the site, firstly they register their pet, then they register themselves. The reason for this order is to check their pet's eligibility for the site (there are some criteria to be met) first, instead of getting the user to sign up only to then find out their pet is ineligible. It is this ordering of the form submissions which is causing me a bit of a headache, as follows... The site is being developed with an MVC framework, and the User registration process is managed via a method in a User_form controller, while the pet registration process is managed via a method in the Pet_form controller. The pet registration form happens first, and the pet data can be saved without the owner_id at this stage, with the user id possibly being added (e.g by retrieving pet's id from session) following user registration. However, doing it this way could potentially result in redundant data, where pet records would be created in the database, but if the user doesn't actually register themselves too, then the pets will be ownerless records in the DB. Other option is to serialize the new pet's data at the pet registration stage, don't save it to the DB until the user fills out their registration form. Once the user is created, i can pass serialised data AND the owner_id to a method in the Pet Model which can update the DB. However, I also need to set the newly created $pet to $this-pet which I then access for a sequence of other related forms. Should I just set the session variable in the model method? Then in the Pet controller constructor, do a check for pet stored in session, if yes, assign to $this-pet... If this makes any sense to anybody and you have some advice, i'd be grateful to hear it!

  Read the article

• jQuery: If, Else with buttons error

  - by Wipqozn

  I'm running into an odd error. I'm working in Django 1.2, and have implemented the commenting framework. I'm trying to attach a hide/show button to each comment field, but whenever click on a hide/show button, it behaves as if each hide/show button beneath it on the page was clicked. Here's the jQuery code: <input type="Button" id="hideShow" name="hide/show" value="Hide"></input> <script> $("#hideShow").click(function() { if($(this).val() == "Hide") { $("textarea").hide("fast"); $(this).val("Show"); } else { $("textarea").show("fast"); $(this).val( "Hide"); } }); </script> So, when I click the Hide/show button, it will perform the action for each button beneath the clicked button + once for the button itself. So If I click a button, and there are two buttons beneath it, and value=hide it will first hide the 'textarea', than show the text area, than finally hide it again. I'm new to jQuery (although I do have experience in other languages), and I have an -idea- why it's not working: that whenever an action is performed jQuery jumps to the first one, than continues down the page looking for any other actions performed, and responds to each one. So it comes to my first button, sets it as being clicked, and so when jQuery comes across the other buttons it views them all as being 'clicked' and performs actions accordingly. I've thought of a semi-solution to my problem, putting in a variable which tracks how many times it has gone through, and than acting based on -that- action. But I would rather not do that, since it's not really a solution to the problem at hand but a work around. Any input is appreciated.

  Read the article

• numpy array assignment problem

  - by Sujan

  Hi All: I have a strange problem in Python 2.6.5 with Numpy. I assign a numpy array, then equate a new variable to it. When I perform any operation to the new array, the original's values also change. Why is that? Please see the example below. Kindly enlighten me, as I'm fairly new to Python, and programming in general. -Sujan >>> import numpy as np >>> a = np.array([[1,2],[3,4]]) >>> b = a >>> b array([[1, 2], [3, 4]]) >>> c = a >>> c array([[1, 2], [3, 4]]) >>> c[:,1] = c[:,1] + 5 >>> c array([[1, 7], [3, 9]]) >>> b array([[1, 7], [3, 9]]) >>> a array([[1, 7], [3, 9]])

  Read the article

• Error 2025: The supplied DisplayObject must be a child of the caller

  - by Mocca

  Hi, sorry, new to actionscript 3. I have a display() function for an object rotator(image based like a QT object movie). It first saves the current image in a helper variable and then allocates a new image, from the library, beneath the old one. To get a nice crossfade effect, the old image's alpha is looped down via enter_frame and then removed. Which is where there seems to be an issue with the display list, maybe recognizing oldImg's value as being already added? (it's not a first pass error) Btw, do i have to remove the old image or can i leave it, for when it's being called up via the mouse position again? (the image number can get fairly large) Does anyone have further insight? Thanks! function display(num:Number):void //num: image number { ... oldImg = newImg; ClassReference = getDefinitionByName("Class"+num) as Class; imgBD = new ClassReference(0,0); newImg = new Bitmap(imgBD); images.addChild(newImg); newImg.x=0; newImg.y=0; } function onEnter(evt:Event):void { if (oldImg) { if (oldImg.alpha > 0) oldImg.alpha -= 0.15; **else images.removeChild(oldImg);** } ... }

  Read the article

• Java Enumeration of Musical Notes

  - by Crupler

  How would you create an enumeration of the musical notes in Java, with each notes having an octave and then a keyed variable? This is what I have so far... public enum Notes { c, cS, d, dS, e, f, fS, g, gS, a, aS, b; int octave; boolean isPlaying; } So when I access the enums in my code I write something like this... Notes.c.octave = 4; Notes.c.isPlaying = true; Now here is my question: How can I have an isPlaying boolean for each note in each octave? Like so: Notes.c.octave.isPlaying = true; Or would I have to go like: public enum Notes { c1, cS1, d1, dS1, e1, f1, fS1, g1, gS1, a1, aS1, b1 c2, cS2, d2, dS2, e2, f2, fS2, g2, gS2, a2, aS2, b2; etc... boolean isPlaying; } Thank you in advance for taking your time to answer this question!

  Read the article

• summing functions handles in matlab

  - by user552231

  Hi I am trying to sum two function handles, but it doesn't work. for example: y1=@(x)(x*x); y2=@(x)(x*x+3*x); y3=y1+y2 The error I receive is "??? Undefined function or method 'plus' for input arguments of type 'function_handle'." This is just a small example, in reality I actually need to iteratively sum about 500 functions that are dependent on each other. EDIT The solution by Clement J. indeed works but I couldn't manage to generalize this into a loop and ran into a problem. I have the function s=@(x,y,z)((1-exp(-x*y)-z)*exp(-x*y)); And I have a vector v that contains 536 data points and another vector w that also contains 536 data points. My goal is to sum up s(v(i),y,w(i)) for i=1...536 Thus getting one function in the variable y which is the sum of 536 functions. The syntax I tried in order to do this is: sum=@(y)(s(v(1),y,z2(1))); for i=2:536 sum=@(y)(sum+s(v(i),y,z2(i))) end

  Read the article

• Approaches for animating a C# property over time?

  - by Mario Fritsch

  I'm currently trying to animate a bunch of public properties on certain objects. Usually they are of type float or vectors of floats (the type is known at compile-time). I want to be able to: assign a static value to them (MyObject.Duration = 10f;) or assign a random value to them by specifying a minimum and maximum value and optionally also a weight (MyObject.Duration = new RandomFloat(5f, 20f, 2f);) or "bind" this property to the property of another object (think of a child object binding some of its properties to its parent object, like its color or size or sth.) or assign sort of a keyframe animation to them, specifying a variable number of keyframes with timecode and the property's value at that specific point in time as well as information about how to interpolate between these frames The keyframes should be able to accept random values for each frame, both for the time and the property's value. What would be a practical approach for this kind of system? Currently I'm thinking about polymorphism: implement a base class or interface with a public Value-property and/or GetValue(float time)-method and then creating different sub classes like StaticValue, RandomValue, BindingValue and AnimatedValue implementing this base class or interface. Doesn't seem very elegant, though, and the initialization of even simple objects becomes a bit tedious. Another idea would be to implement these properties just as regular floats or vectors and create special "Modifier"-types binding to these properties. To retrieve the "real" value of the property, I'd first call any Modifier bound to the property, which would in turn update the actual object's property for me to retrieve later on. That would most likely mean using reflection at some point, which could be quite bad for performance as I'll probably have thousands of properties to update dozens of times per second. Any suggestions on this? Being a novice I'm (hopefully) missing some far more elegant and/or practical solution than I'm already playing around with :( Edit: Probably should have mentioned this earlier, but WPF isn't an option - it's not available on all targetted platforms, so I can't rely on it. I'm aware of its powerful databinding and animation capabilities, but I need to roll my own (or find some other lightweight alternative meeting my needs).

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >