Search Results

Search found 45852 results on 1835 pages for 'event id 861'.

Page 478/1835 | < Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >

• iSCSI errors continue after removing inaccessible target portal

  - by Ansgar Wiechers

  By mistake I entered an iSCSI target portal address in the iSCSI Initiator on one of our virtual servers that does not have an address in the network range used for iSCSI. This caused the following errors/warnings to appear in the eventlog: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *192.168.23.42 0003260 Root\ISCSIPRT\0000_0 . Log Name: System Source: iScsiPrt Event ID: 1 Level: Error Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data. Log Name: System Source: iScsiPrt Event ID: 70 Level: Error Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data. So far that's expected beahvior, so I removed the portal from the iSCSI Initiator as described in MSKB 976072. However, the errors/warnings keep appearing every hour, even though neither iSCSI Initiator GUI nor iscscli show any portals: C:\>iscsicli ListTargetPortals Microsoft iSCSI Initiator Version 6.1 Build 7601 The operation completed successfully. The problem persists after rebooting the server. Uninstalling the Microsoft iSCSI Initiator device via devmgmt.msc as well as changing the Initiator parameters like this: [HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-BFC1-08002BE10318}] "MaxPendingRequests"=dword:00000001 "MaxConnectionRetries"=dword:00000001 "MaxRequestHoldTime"=dword:00000005 didn't help either. Each change was followed by a reboot. Disabling the device does prevent the errors/warnings from re-appearing, of course, but I'd rather not have to resort to this. How can I prevent those errors and warnings from appearing (short of disabling the initiator device or re-installing the server)? What am I missing? Environment: The virtual machine runs on a Hyper-V cluster managed by SCVMM 2012. Hosts and guests run Windows Server 2008 R2 SP1. The physical machines are Dell PowerEdge M710HD blades.

  Read the article

• windows 8.1 upgrade fails with error code 0xc1900101-0x20017

  - by cmorse

  I just tried to install windows 8.1 on my laptop, but it fails to install with the message: Sorry we couldn't complete the update to Windows 8.1. We restored your previous version of Windows to this PC 0xC1900101 - 0x20017 It looks like on the first boot that the laptop is going to the PC restore screen (it asks what kind of keyboard I have, and then what repair optins I would like to take). Thus far I have just been selecting "Continue to windows 8." I'm running a Lenovo x220i tablet. I've got 43GB of free disk space. It installed just fine on my desktop. The primary difference between the two machines is that the desktop has media center install, and isn't using TrueCrypt. Full WindowsUpdate.log http://pastebin.com/hGmAW4Q1 Most important portion of WindowsUpdate.log: 2013-10-17 10:41:06:671 964 694 Agent ************* 2013-10-17 10:41:06:671 964 694 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2013-10-17 10:41:06:671 964 694 Agent ********* 2013-10-17 10:41:06:671 964 694 Agent * Online = No; Ignore download priority = No 2013-10-17 10:41:06:671 964 694 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2013-10-17 10:41:06:671 964 694 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2013-10-17 10:41:06:671 964 694 Agent * Search Scope = {Machine & All Users} 2013-10-17 10:41:06:671 964 694 Agent * Caller SID for Applicability: S-1-5-18 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {AD47FBDC-F7F9-4E7F-BAF4-DBA3784C7101} 2013-10-17 10:41:06:436-0600 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {8D4E7A67-9526-4702-A897-5BE5F97497AF} 2013-10-17 10:41:06:639-0600 1 204 [AGENT_INSTALLING_FAILED_POST_REBOOT] 101 {8951E70D-4332-4F7C-B92D-D9362E384959} 1 c1900101 WSAcquisition Failure Content Install Installation Failure Post Reboot. 2013-10-17 10:41:07:249 964 870 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2013-10-17 10:41:07:249 964 870 Report WER Report sent: 7.8.9200.16715 0xc1900101(0x20017) 8951E70D-4332-4F7C-B92D-D9362E384959 Install 101 Unmanaged 2013-10-17 10:41:07:249 964 870 Report CWERReporter finishing event handling. (00000000)

  Read the article

• Windows 2003 R2 x86 Mini dump fails to write to disk

  - by Randy K

  I have 3 blade servers that are Blue Screening with a 0xC2 error as far as we can tell randomly. When it started happening I found that the servers weren't set to do provide a dump because they each have 16GB RAM and a 16GB swap file divided over 4 partitions in 4GB files. I set them to provided a small dump file (64K mini dump), but the dump files aren't being written. On start up the server event log is reporting both Event ID 45 "The system could not sucessfully load the crash dump driver." and Event ID 49 "Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory." I understanding is the the small dump shouldn't need a swap file large enough for all physical memory, but the error seems to point to this not being the case. The issue of course is that the max swap file size is 4GB, so this seems to be impossible. Can anyone point me where to go from here?

  Read the article

• Windows Explorer keeps crashing in Windows 8.1

  - by Jonathan Allen

  This started a few days ago on a machine that has been running WIn 8.1 for over a month. I just finished a clean install of Windows 8.1 with a handful of apps like Dropbox and Office. Yet I'm still getting Windows Explorer crashes such as this: Faulting application name: Explorer.EXE, version: 6.3.9600.16408, time stamp: 0x523d251b Faulting module name: SHELL32.dll, version: 6.3.9600.16409, time stamp: 0x523fac81 Exception code: 0xc00000fd Fault offset: 0x0000000000189247 Faulting process id: 0xee8 Faulting application start time: 0x01ced2a62f6e5b2e Faulting application path: C:\WINDOWS\Explorer.EXE Faulting module path: C:\WINDOWS\system32\SHELL32.dll Report Id: e25c6b13-3eb4-11e3-be7a-2cd05a597b87 Faulting package full name: Faulting package-relative application ID: I assume that it is some sort of shell extension, but I don't know how to figure out which one.

  Read the article

• RPCSS kerberos issues on imaged Windows workstations

  - by sysadmin1138

  While doing some unrelated troubleshooting I came across a set of Event Log entries that have me concerned. Machine Name: labcomputer82 Source: Security-Kerberos Event ID: 4 Event Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server labcomputer143$. The target name used was RPCSS/imagemaster4.ad.domain.edu. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (AD.DOMAIN.EDU) is different from the client domain (AD.DOMAIN.EDU), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server. There are three machine names used in this message. It's generated on labcomputer82, it's attempting to talk to another lab workstation called labcomputer143, and the service in question (RPCSS) refers to the name of the machine that this machine was imaged from (and possibly also that of labcomputer143, I'm not sure). The thing that has me raising both eyebrows is that the machine named labcomputer82 is attempting to use an SPN of RPCSS/imagemaster4.ad.domain.edu. The SPN attribute on the computer object in AD looks just fine. It has all the names it should have. Of the over 3,000 computer objects in our AD domain, somewhere around 1,700 of the are computer-lab seats that are frequently imaged. If we're doing something wrong, I'd like to know in time to get our procedures modified (and people retrained) for fall quarter. But if this is normal for imaged machines, I'll just continue ignoring these.

  Read the article

• Credentials can not be delegated - Alfresco Share

  - by leftcase

  I've hit a brick wall configuring Alfresco 4.0.d on Redhat 6. I'm using Kerberos authentication, it seems to be working normally, and single sign on is working on the main alfresco app itself. I've been through the configuration steps to get the share app working, but try as I may, I keep getting this error in catalina.out each time a browser accesses http://server:8080/share along with a 'Windows Security' password box. WARN [site.servlet.KerberosSessionSetupPrivilegedAction] credentials can not be delegated! Here's what I've done so far: Using AD users and computers, selected the alfrescohttp account, and selected 'trust this user for delegation to any service (Kerberos only). Copied /opt/alfresco-4.0.d/tomcat/shared/classes/alfresco/web-extension/share-config-custom.xml.sample to share-config-custom.xml and edited like this: <config evaluator="string-compare" condition="Kerberos" replace="true"> <kerberos> <password>*****</password> <realm>MYDOMAIN.CO.UK</realm> <endpoint-spn>HTTP/[email protected]</endpoint-spn> <config-entry>ShareHTTP</config-entry> </kerberos> </config> <config evaluator="string-compare" condition="Remote"> <remote> <keystore> <path>alfresco/web-extension/alfresco-system.p12</path> <type>pkcs12</type> <password>alfresco-system</password> </keystore> <connector> <id>alfrescoCookie</id> <name>Alfresco Connector</name> <description>Connects to an Alfresco instance using cookie-based authentication</description> <class>org.springframework.extensions.webscripts.connector.AlfrescoConnector</class> </connector> <endpoint> <id>alfresco</id> <name>Alfresco - user access</name> <description>Access to Alfresco Repository WebScripts that require user authentication</description> <connector-id>alfrescoCookie</connector-id> <endpoint-url>http://localhost:8080/alfresco/wcs</endpoint-url> <identity>user</identity> <external-auth>true</external-auth> </endpoint> </remote> </config> Setup the /etc/krb5.conf file like this: [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = MYDOMAIN.CO.UK default_tkt_enctypes = rc4-hmac default_tgs_enctypes = rc4-hmac forwardable = true proxiable = true [realms] MYDOMAIN.CO.UK = { kdc = mydc.mydomain.co.uk admin_server = mydc.mydomain.co.uk } [domain_realm] .mydc.mydomain.co.uk = MYDOMAIN.CO.UK mydc.mydomain.co.uk = MYDOMAIN.CO.UK /opt/alfresco-4.0.d/java/jre/lib/security/java.login.config is configured like this: Alfresco { com.sun.security.auth.module.Krb5LoginModule sufficient; }; AlfrescoCIFS { com.sun.security.auth.module.Krb5LoginModule required storeKey=true useKeyTab=true keyTab="/etc/alfrescocifs.keytab" principal="cifs/server.mydomain.co.uk"; }; AlfrescoHTTP { com.sun.security.auth.module.Krb5LoginModule required storeKey=true useKeyTab=true keyTab="/etc/alfrescohttp.keytab" principal="HTTP/server.mydomain.co.uk"; }; com.sun.net.ssl.client { com.sun.security.auth.module.Krb5LoginModule sufficient; }; other { com.sun.security.auth.module.Krb5LoginModule sufficient; }; ShareHTTP { com.sun.security.auth.module.Krb5LoginModule required storeKey=true useKeyTab=true keyTab="/etc/alfrescohttp.keytab" principal="HTTP/server.mydomain.co.uk"; }; And finally, the following settings in alfresco-global.conf authentication.chain=kerberos1:kerberos,alfrescoNtlm1:alfrescoNtlm kerberos.authentication.real=MYDOMAIN.CO.UK kerberos.authentication.user.configEntryName=Alfresco kerberos.authentication.cifs.configEntryName=AlfrescoCIFS kerberos.authentication.http.configEntryName=AlfrescoHTTP kerberos.authentication.cifs.password=****** kerberos.authentication.http.password=***** kerberos.authentication.defaultAdministratorUserNames=administrator ntlm.authentication.sso.enabled=true As I say, I've hit a brick wall with this and I'd really appreciate any help you can give me! This question is also posted on the Alfresco forum, but I wondered if any folk here on serverfault have come across similar implementation challenges?

  Read the article

• Why does `rpm` show 3 httpd packages, and which one provides the real httpd?

  - by Stefan Lasiewski

  I ran yum update on my CentOS5 webserver a few days ago. Today I just noticed that I have 3 httpd-* rpms! How can I end up with three RPMs for httpd (My other servers only have one httpd rpm). I want to make sure that my server has a patched, updated version of /usr/sbin/httpd. How can I tell which one of these packages provides the httpd binary at /usr/sbin/httpd? [root@node1 ~]# rpm -q httpd httpd-2.2.3-76.el5.centos httpd-2.2.3-78.el5.centos httpd-2.2.3-83.el5.centos [root@node1 ~]# /usr/sbin/httpd -V |grep version Server version: Apache/2.2.3 [root@node1 ~]# rpm -q httpd-2.2.3-76.el5.centos --list |grep -w /usr/sbin/httpd /usr/sbin/httpd /usr/sbin/httpd.event /usr/sbin/httpd.worker [root@node1 ~]# rpm -q httpd-2.2.3-78.el5.centos --list |grep -w /usr/sbin/httpd /usr/sbin/httpd /usr/sbin/httpd.event /usr/sbin/httpd.worker [root@node1 ~]# rpm -q httpd-2.2.3-83.el5.centos --list |grep -w /usr/sbin/httpd /usr/sbin/httpd /usr/sbin/httpd.event /usr/sbin/httpd.worker [root@node1 ~]# root@node1 ~]# rpm -q --provides httpd |grep -w httpd config(httpd) = 2.2.3-76.el5.centos httpd-mmn = 20051115 httpd = 2.2.3-76.el5.centos config(httpd) = 2.2.3-78.el5.centos httpd-mmn = 20051115 httpd = 2.2.3-78.el5.centos config(httpd) = 2.2.3-83.el5.centos httpd-mmn = 20051115 httpd = 2.2.3-83.el5.centos Update: Answering Mark Wagner's questions: [root@node1 ~]# rpm -q -f /usr/sbin/httpd httpd-2.2.3-76.el5.centos httpd-2.2.3-78.el5.centos httpd-2.2.3-83.el5.centos [root@node1 ~]# rpm -V httpd-2.2.3-83.el5.centos S.5..... c /etc/logrotate.d/httpd S.5..... c /etc/rc.d/init.d/httpd ....L... /var/www

  Read the article

• Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

  - by sapporo

  I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

  Read the article

• Nano suddenly putting in weird characters when I type

  - by Cocorico

  I am using a shell and editing a file in nano (similar to pico). A short while ago, it started doing this thing where if I type: $query = "select" * from topics where id='' "; and then I hit Backspace and try to stick the letter 'a' into the id='' part, it changes it to: $query = "select * from koala_topics where id='a='' "; and the cursor jumps around to a few spaces before. Also if I type print At the start of a new line, and then I think "Oh I should have added a tab" and I go back and try to add a tab, it adds a tab AND 2 spaces, and if I put the cursor through the word print, it turns into printnt. Some other weird things have happened too. I uninstalled nano using yum (which is how I installed it), and then re-installed it, thinking that would get me clean preferences (in case that was the problem) but it doesn't fix it.

  Read the article

• Intermittent unavailability of an instance in a failover cluster while a standby node is offline in

  - by Emil Fridriksson

  Hi everyone. I've got a small failover cluster that I run for the websites my company has. During a RAM upgrade of the standby server, our websites started to show errors about not being able to access the database server. I verified that the instance was indeed up and the server accessable via remote desktop. I also tried a SQL connection to it and it worked, but that might have been after it became available again. This happened on and off until we were able to roll back the hardware changes that were in progress on the standby server and we were able to bring it back up. There was nothing of interest in the SQL Server log, but there is a continous log for the whole duration of the problem, so there was no restart of the SQL Server service. The event viewer is of more interest, since it shows events relating to the heartbeat network card, but I don't know how that would affect the availability of the server, since the standby node is offline. I'd appreciate any help you can provide, it's not very redundant if the setup depends on the standby server being up. :) Here are the event logs from the time of the problem, I include all of them since I can't seem to see what could possibly be the cause of the problem. Event log: http://hlekkir.com:800/htmltable.htm

  Read the article

• SharePoint Records Center Submitted E-mail Records not picked up

  - by Kenneth Verburg

  We have set up a new SharePoint 2007 site with a Records Repository. We're using Exchange 2007 Managed Folders to route e-mails to this repository based on the 'label' attached to the e-mail as set in the Exchange 2007 journaling options. E-mails added to a Managed Folder get sent to SharePoint, they end up in the "Submitted E-mail Records" list of the Records Repository. That's according to plan, but the e-mails are not routed to the respective document library as defined by the label. Instead an error appears in the event viewer for every e-mail listed in the Submitted E-mail Records list, on every interval of the records repository schedule (set to every two minutes for testing purposes): Value cannot be null, parameter name: g. Sending a document from the SharePoint site iself to the Records Repository via the Send To... link works fine, but e-mails get stuck in the list... We have set Document Libraries in the Respository with and without content types (with matching names with the Label and the Record Routing rule set). Any ideas what could be wrong? This is in the event log: Every two minutes the following error appears in the Application Log: Source: Office SharePoint Server Category: Records Center Type: Error Event ID: 4975 User: N/A Computer: SPS2007 Description: Value cannot be null. Parameter name: g For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Clients not recognizing secondary LDAP groups?

  - by Nick

  I'm having an issue where users who are members of secondary groups in LDAP are not being recognized as members of that group by the client. In this case, user jdoe is not being recognized as a member of the projects group. On the client, getent group shows: projects:*:20001:1001,1002,1003,1004,1005,1006 and getent passwd shows: jdoe:x:1003:10003:John Doe:/home/jdoe:/bin/bash But if I log in to the client as jdoe, and run id, I get: uid=1003(jdoe) gid=10003(jdoe) groups=24(cdrom),25(floppy),29(audio),44(video),46(plugdev),10003(jdoe) It recognizes jdoe's primary group, and the secondary groups that are appended by the client to all LDAP users, but the LDAP secondary groups are not in the list. We can see that jdoe's id is in the projects group, so why is the projects group not showing when jdoe runs the id command? The group objects are basic posixGroup entries, with a memberUid attribute for each of its members. We are using OpenLDAP on Ubuntu 10.04 server and clients.

  Read the article

• Plesk file permissions - Apache/PHP conflicting with user accounts.

  - by hfidgen

  Hiya, I'm building a Drupal site which performs various automatic disk operations using the apache user (id=40). The problem is that the site was set up on a subdomain belonging to user ID 10001 (ie my main FTP account) so the filesystem belongs to that user ID. So I keep getting errors like this: warning: move_uploaded_file() [function.move-uploaded-file]: SAFE MODE Restriction in effect. The script whose uid is 10001 is not allowed to access /var/www/vhosts/domain.com/httpdocs/sites/default/files/images/user owned by uid 48 in /var/www/vhosts/domain.com/httpdocs/includes/file.inc on line 579. I've tried changing the apache group in httpd.conf to apache:psacln, psacln being the default group for all web users but that's not helped. The situation now is: ..../files/images/ = 777 and chown = ftplogin:psacln ..../files/images/user = 775 and chown = apache:psacln ..../files/tmp = 777 and chown = ftplogin:psacln So apparently uid 40 and 10001 both have permissions to write to any of the 3 directories involved, but still can't. Am i missing something here? Can anyone help? Thanks!

  Read the article

• Exchange 2010 POP3/IMAP4/Transport services complaining that they can't find SSL certificate after blue screen

  - by Graeme Donaldson

  We have a single-server Exchange 2010 setup. In the early hours of this morning the server had a blue screen and rebooted. After coming back up the POP3/IMAP4 and Transport services are complaining that they cannot find the correct SSL certificate for mail.example.com. POP3: Log Name: Application Source: MSExchangePOP3 Date: 2012/04/23 11:45:15 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. SSL or TLS encryption can't be made to the POP3 service. IMAP4: Log Name: Application Source: MSExchangeIMAP4 Date: 2012/04/23 08:30:44 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. Neither SSL or TLS encryption can be made to the IMAP service. Transport: Log Name: Application Source: MSExchangeTransport Date: 2012/04/23 08:32:27 AM Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: Microsoft Exchange could not find a certificate that contains the domain name mail.example.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCH01 with a FQDN parameter of mail.example.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. The odd part is that Get-ExchangeCertificate show the cert as enabled for all the relevant services, and OWA is working flawlessly using this certificate. [PS] C:\Users\graeme\Desktop>Get-ExchangeCertificate Thumbprint Services Subject ---------- -------- ------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ....S. CN=exch01 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ....S. CN=exch01 ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ IP.WS. CN=mail.example.com, OU=Domain Control Validated, O=mail.exa... Here's the certificate in the computer account's personal cert store: Does anyone have any pointers for getting POP3/IMAP4/SMTP to use the cert again?

  Read the article

• Excel formula: can MATCH recognise 'n'&"01", or 'n'&"02 "

  - by Mike

  I have an Excel sheet (source) that has simple ID numbers in column A (01 to 40000). In another sheet (child) I have these same ID numbers in column A but with either an additional 01 or 02 added on; e.g. 0101 or 0102, 250001 or 250002, etc. Therefore this list of ID numbers is nearly twice as long. In column B there are figures. I'm trying to extract the data from column B in the child sheet, and based on whether it has a "01" or a "02" place the figure into either column B or C of the source sheet. My idea is to use INDEX/MATCH, but I'm not sure how the match would be written to take into account the NOT EXACT MATCH of the lookup value. MATCH(A1&"01",child!A1:A100000,). Any tips and links greatly appreciated. Mike.

  Read the article

• rewrite rule does not rewrite url as expected

  - by user1708687

  I have a problem with a CMS website, that normally generates readable urls. Sometimes it happens that navigation links are shown as www.domain.com/22, which results in an error, instead of www.domain.com/contact. I have not found a solution for this yet, but the page is working if the url is www.domain.com/index.php?id=22. Therefore, I'm trying to rewrite www.domain.com/22 to www.domain.com/index.php?id=22 and I have used this rewrite rule: RewriteRule ^([1-9][0-9]*)$ index.php?id=$1 [NC] I tested it using http://htaccess.madewithlove.be and here it shows the correct result, but on the website no rewrite is happening.

  Read the article

• How do I connect a 2008 server to a 2003 server active directory?

  - by Matt

  Our DC is running Windows Server 2003. I've just set up Windows Server 2008 and have terminal server running on it. When setting the terminal server permissions, it was able to allow a group name that was read from the domain. In the DC the new terminal server shows up as a computer in the domain. I can also log in as a user within the domain even though that user doesn't exist locally on the new server. However, when I go to set sharing permissions on the new machine it doesn't show my domain as a location. Instead it is only looking at location "machinename" and not allowing domain to be seen or added. Is there something I'm missing? Ok, lots of errors in the event log. We have this: The winlogon notification subscriber is taking long time to handle the notification event (Logon). Followed by this: The winlogon notification subscriber took 121 second(s) to handle the notification event (Logon). Followed by: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator. I think this might be the same problem I'm having http://serverfault.com/questions/24420/primary-domain-controller-slow Solved. The issue was that I had changed from DHCP to static and put the wrong DNS server IP in. i.e. firewall instead of DC/DNS server.

  Read the article

• SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

  - by g18c

  I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

  Read the article

• SharePoint Records Center Submitted E-mail Records not picked up

  - by Kenneth Verburg

  We have set up a new SharePoint 2007 site with a Records Repository. We're using Exchange 2007 Managed Folders to route e-mails to this repository based on the 'label' attached to the e-mail as set in the Exchange 2007 journaling options. E-mails added to a Managed Folder get sent to SharePoint, they end up in the "Submitted E-mail Records" list of the Records Repository. That's according to plan, but the e-mails are not routed to the respective document library as defined by the label. Instead an error appears in the event viewer for every e-mail listed in the Submitted E-mail Records list, on every interval of the records repository schedule (set to every two minutes for testing purposes): Value cannot be null, parameter name: g. Sending a document from the SharePoint site iself to the Records Repository via the Send To... link works fine, but e-mails get stuck in the list... We have set Document Libraries in the Respository with and without content types (with matching names with the Label and the Record Routing rule set). Any ideas what could be wrong? This is in the event log: Every two minutes the following error appears in the Application Log: Source: Office SharePoint Server Category: Records Center Type: Error Event ID: 4975 User: N/A Computer: SPS2007 Description: Value cannot be null. Parameter name: g For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Run .sh file in linux machine via putty

  - by Prateek

  I want run an .sh file which take an argument in a Linux machine. I'm using plink.exe to execute this .sh file from a windows machine. But I don't know what to write in the batch file in order to run plink.exe which in turn executes the .sh file and this file arguement. I have written following batch command: @echo off start C:\Users\Prateek\Desktop\PLINK.EXE -ssh -P 22 user@host -pw password sh -x "/home/user/copy.sh" On executing it, I get: + echo '' + echo 'Enter partner id' Enter partner id + read pid : Actually 'Enter partner id' is the argument, which I need to pass.

  Read the article

• Recover RAID 5 data after created new array instead of re-using

  - by Brigadieren

  Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

  Read the article

• Applescript to connect to bluetooth device

  - by Mark117

  I'm trying to create an applescript to allow me to connect to a bluetooth device by it's Bluetooth ID. So far, i've managed to get an applescript to turn on bluetooth if it's off. Here's the code: # This is only necessary, if AppleScripts are not yet allowed to change checkboxes tell application "System Events" to set UI elements enabled to true # Now change the bluetooth status tell application "System Preferences" set current pane to pane id "com.apple.preferences.bluetooth" tell application "System Events" tell process "System Preferences" # Enabled is checkbox number 2 if value of checkbox 2 of window "Bluetooth" is 0 then click checkbox 2 of window "Bluetooth" end if end tell end tell quit end tell Would someone know if and how it's possible to set up a new bluetooth device and if it'd be posible to connect to a device based on it's device name/ it's device bluetooth ID? I've also tried to record the action in Automator but for the "set up new device" option, Automator just tells me: "click on "" button". Thanks

  Read the article

• Windows errors, how do I find root cause and fix it? Getting several errors

  - by Eric Martin

  My server is having issues and not responding to customer's https requests. I checked the event viewer and found several errors. These two are listed a couple of times: WINS encountered a database error. This may or may not be a serious error. WINS will try to recover from it. You can check the database error events under 'Application Log' category of the Event Viewer for the Exchange Component, ESENT, source to find out more details about database errors. If you continue to see a large number of these errors consistently over time (a span of few hours), you may want to restore the WINS database from a backup. The error number is in the second DWORD of the data section. And this one: An error occured while using SSL configuration for socket address 0.0.0.0:444. The error status code is contained within the returned data. SQL Server is not ready to accept new client connections. Wait a few minutes before trying again. If you have access to the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. [CLIENT: xxx.xxx.xxxx.xxx] I also found this in the event viewer but the computer has been restarted since this message and I have not seen it again. Configuring the Page file for crash dump failed. Make sure there is a page file on the boot partition and that is large enough to contain all physical memory. This is my virtual memory settings: I'm not familiar with WINS so I wasn't sure if that is where I start or how to resolve it. Is the WINS error causing the other problems or should I be looking somewhere else?

  Read the article

• Return cell reference as result of if statement with vlookups.

  - by EMJ

  I have two sets of data in excel. One contains a set of data which represents the initial step of a process. The other set of data represents the additional steps which take place after the first step is completed. Each of the data records in the "additional step data" has an id in a column. I need to find the identifying codes of the "additional step data" which correspond with the initial step data records. The problem is that I have to match the data in 4 columns between the two data sets and return the id of the "additional step data". I started by doing a combination of an if and vlookup functions, but I got stuck when I tried to figure out how to get the if statement to reference the id of the matching "additional step data". Basically I am trying to avoid having to search by manually filtering between two sets of data and finding corresponding records. Does anyone have any idea about how to do this?

  Read the article

• Strange email coming from/to my computer

  - by Micah

  I'm running smtp4dev on my machine to trap anything going in/out of my computer on port 25 for testing purposes. Every so often this email gets trapped and I have no idea what it's from. I have Microsoft Security Essentials running on my machine and it hasn't identified and viruses or anything so I'm not sure what's going on. Here's the content of the message: Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Message-ID: <[email protected]> From: "" <[email protected]> To: <[email protected]> Subject: BC_173.162.7.130 Date: Fri, 24 Jun 11 20:36:15 GMT MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000D_01C2CC60.49F4EC70"

  Read the article

< Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >