Search Results

Search found 14079 results on 564 pages for 'folding at home'.

Page 479/564 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

  • Strange WiFi problem - network is "not connected" but works

    - by GalacticCowboy
    Background I'm using a Windows XP tablet PC connected to my home network. I do broadcast the SSID, but otherwise the wireless network is locked down as tight as I can make it - WPA2 with a strong key, MAC filtering, etc. I've had this computer for about 4 years and the router for about 6 months. Before that, the previous router was set up in the same way, and I've never had any particular problems. Problem This morning - as I type this, as a matter of fact - Windows is reporting that none of my network connections are connected. Yet somehow my Internet connectivity still works! ipconfig reports a valid IP address, domain, etc., even though Windows apparently doesn't know about it. I tried repairing the connection and it had no effect - the repair eventually timed out. I'm pretty sure that I could reboot the computer and/or the router, etc. and it would fix the problem. However, I'm more interested in knowing if any of you have ever seen anything like this, and what might have caused it? Since it works I'm not inclined to mess with it too much. My concern is that it's a precursor to bigger problems.

    Read the article

  • Setting up logging for a remote backup script

    - by Brian Dainis
    So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

    Read the article

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • Postfix: How to configure Postfix with virtual Dovecot mailboxes?

    - by user75247
    I have configured a Postfix mail server for two domains: domain1.com and domain2.com. In my configuration domain1 has both virtual users with Maildirs and aliases to forward mail to local users (eg. root, webmaster) and some small mailing lists. It also has some virtual mappings to non-local domains. Domain2 on the other hand has only virtual alias mappings, mainly to corresponding 'users' at domain1 (eg. mails to [email protected] should be forwarded to [email protected]). My problem is that currently Postfix accepts mail even for those users that don't exist in the system. Mail to existing users and /etc/aliases works fine. Postfix documentation states that the same domain should never be specified in both mydestination and virtual_mailbox_maps, but If I specify mydestination as blank then postfix validates recipients against virtual_mailbox_maps but rejects mail for local aliases of domain1.com. /etc/postfix/main.cf: myhostname = domain1.com mydomain = domain1.com mydestinations = $myhostname, localhost.$mydomain, localhost virtual_mailbox_domains = domain1.com virtual_mailbox_maps = hash:/etc/postfix/vmailbox virtual_mailbox_base = /home/vmail/domains virtual_alias_domains = domain2.com virtual_alias_maps = hash:/etc/postfix/virtual alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases virtual_transport = dovecot /etc/postfix/virtual: domain1.com right-hand-content-does-not-matter firstname.lastname user1 [more aliases..] domain2.com right-hand-content-does-not-matter @domain2.com @domain1.com /etc/postfix/vmailbox: [email protected] user1/Maildir [email protected] user2/Maildir /etc/aliases: root: :include:/etc/postfix/aliases/root webmaster: :include:/etc/postfix/aliases/webmaster [etc..] Is this approach correct or is there some other way to configure Postfix with Dovecot (virtual) Maildirs and Postfix aliases?

    Read the article

  • Questions about NGINX limit_req_zone

    - by Meteor
    I got a problem with NGINX limit_req_zone. Anyone can help? The problem is that, I want to limit user access to some specific URL, for example: /forum.php?mod=forumdisplay? /forum.php?mod=viewthread&*** But, I do want to add an exception for below URL, /forum.php?mod=image&* Below is the location section of my configuration, the problem is that, for URL started with /forum.php?mod=image&*, the limitation is still applied. Any body can help? location ~*^/forum.php?mod=image$ { root /web/www; fastcgi_pass unix:/tmp/nginx.socket; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } location ~*^/(home|forum|portal).php$ { root /web/www; limit_conn addr 5; limit_req zone=refresh burst=5 nodelay; fastcgi_pass unix:/tmp/nginx.socket; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } location ~ \.php$ { root /web/www; fastcgi_pass unix:/tmp/nginx.socket; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; }

    Read the article

  • Apache2 403 permission denied on Ubuntu 12.04

    - by skeniver
    I have a sub-directory in my /var/www folder called prod, which is password protected. It was all working fine until I asked my server admin to help me set up allow all access to one particular file. Now the entire folder is just giving me a 403 error. This is the sites-enabled file: <VirtualHost *:80> ServerAdmin [email protected] # Server name ServerName prod.xxx.co.uk DocumentRoot /var/www/prod <Directory /var/www/prod> Options Indexes FollowSymLinks MultiViews +ExecCGI Includes AllowOverride None Order allow,deny AuthType Basic AuthName "Please log in" AuthUserFile /home/ubuntu/.htpasswd Require valid-user </Directory> <Directory /var/www/prod/xxx/cgi-bin/api.pl> Allow from All Satisfy Any </Directory> ScriptAlias /xxx/cgi-bin/ /var/www/prod/xxx/cgi-bin/ ErrorLog ${APACHE_LOG_DIR}/prod.xxx.error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/prod.xxx.access.log combined </VirtualHost> Now he's unsure why this is blocking me out completely. No permissions have been changed, but this is the /var/www/ folder: 4 drwxr-xr-x 2 root root 4096 Jan 3 21:10 images 4 drwxr-sr-x 4 root www-data 4096 Mar 31 14:47 jslib 4 drwxr-xr-x 7 root root 4096 Jun 2 13:00 prod When I try to visit http://prod.xxx.co.uk, I don't get asked for the password; I just get 403'd I hope I've given enough information... Anyone able to spot something he can't?

    Read the article

  • debian lenny email server

    - by Dal
    Hi I am a newbie and set up a debian lenny at home and set up the web and email server in the default installation. I followed the instructions for Exim and ran dpkg-reconfigure exim4-config and set it up for mydomainhere.com. I created a one line message file and attempted to test exim by running the command exim [email protected] < msgfile. I also tried using exim4 Exim but i get same error -bash: Exim: command not found. Obviously I am ignorant on how to run exim and test. I also tried to run a php file that sends a test mail and had no success. That script is tested and works fine if I send it from my hosting isp on a different domain. So I know the php script is good. I set up the debian system behind a netgear firewall and uses 192.168.1.x ip . The web server works great and users can visit my site. But I am lack the knowledge on how to get the email working. Appreciate is someone can guide me.

    Read the article

  • VirtualName-based local development host behind corporate proxy (MAMP)

    - by geerlingguy
    I am behind a corporate proxy server/firewall, and this firewall seems to not be too happy with my idea of local development. On my home computer (Mac/Leopard), I have MAMP running, with a rule in /etc/hosts that directs dev.example.com to 127.0.0.1, and I have a virtualhost set up in the httpd.conf file which works great for me. However, at work, I set up the exact same configuration, but am not able to access dev.example.com, likely due to some address/DNS translation going on via the proxy server. Here are the relevant details from Terminal: $ ping dev.example.com PING dev.example.com (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.025 ms $ host dev.example.com Host dev.example.com not found: 3(NXDOMAIN) I've tried adding dev.example.com to the list of bypass addresses in System Preferences (the 'Bypass proxy settings for these Hosts & Domains' list), but that had no effect. Is there any way I can develop locally using name-based hosts at work? I can access localhost, but can't get to the dev.example.com (or any other custom virtualhosts) here at work, which complicates other matters related to the sites on which I'm working...

    Read the article

  • Splitting an HTTP request into multiple byte-range requests

    - by redpola
    I have arrived at the unusual situation of having two completely independent Internet connections to my home. This has the advantage of redundancy etc but the drawback that both connections max out at about 6Mb/s. So one individual outbound http request is directed by my "intelligent gateway" (TP-LINK ER6120) out over one or the other connection for its lifetime. This works fine over complex web pages and utilises both external connects fine. However, single-http-request downloads are limited to the maximum rate of one of the two connections. So I'm thinking, surely I can setup some kind of proxy server to direct all my http requests to. For each incoming http request, the proxy server will issue multiple byte-range requests for the desired data and manage the reassembly and delivery of that data to the client's request. I can see this has some overhead, and also some edge cases where there will be blocking problems waiting for data. I also imagine webmasters of single-servers would rather I didn't hit them with 8 byte-range requests instead of one request. How can I achieve this http request deconstruct/reconstruction? Or am I just barking mad?

    Read the article

  • NAS for Mac OS X Server

    - by SamAdmin
    I'm using Mac OS X Server and want to allow the users that connect to their network accounts to store their data on a NAS drive. I want the users to connect to the Lion server as this allows for better policies and management for me and for their afp share to be located on a NAS drive. I've looked into home directories and network logins however I don't want the users to connect into a different login environment, just an authentication against their provided account on the Lion server and for their finder to take them to their own storage area - located on the NAS drive. Currently I am using FreeNAS for both authentication and storage however there are getting to be far too many people to manage each afp share and account, plus just using FreeNAS is extremely limiting for expansion and if something goes wrong with 1 entity the entire system goes down. Using the Lion server for user accounts and policies will be much better for this expanding business. I have looked into LDAP, using the Lion server as an LDAP server to authenticate against for FreeNAS however I have had issues with this and thought a different approach could be better from the other side of the situation... Providing the account with somewhere to store data rather than the afp share authenticating against an LDAP server. I am wrong to try it this way? Is it possible to logically add storage to a Mac OS X Server which can be recognised as a local drive, so can be used for network accounts?

    Read the article

  • cPanel FTP account access to sym links from parent directory

    - by totbar
    I would like to give a potential developer temporary access to some of my projects. I have almost everything in its own subdomain, and each directory is a sibling to my public_html directory. It looks something like: ("developer" is the cPanel account name.) developer/ *This is the top level directory for the cPanel account. "/home/developer" site1/ *site1.mysite.com site2/ *site2.mysite.com site3/ *site3.mysite.com public_html/ *www.mysite.com ... etc I created a directory inside public_html called tempdev and I added symbolic links to each of the sibling directories listed above. My understanding of cPanel is that I can only assign one user with "Special FTP Access" per domain. I really dont want to give a complete stranger my login creds, (its just a development environment but still). So I used the cPanel FTP account creator UI. It will not allow me to assign the user access to the directories outside of public_html. I cant even give access to public_html either. So I made the tempdev directory in www and created the symlinks. Using the new account, I can see the symlinks, but I can go into them. Is there a better way to accomplish what I am attempting?

    Read the article

  • How do I speed up and cache mmap file access over NFS on Linux?

    - by Zan Lynx
    The server and client are both 64-bit Ubuntu 10.04 LTS. The application in question is a custom app that uses mmap() for fast random file access. Its ideal state is when the entire file is cached in RAM. The network connections are really fast 10Gb Ethernet. It is a virtual server blade setup. It isn't the network connections slowing things down because everything performs superbly when using a virtual disk (iSCSI to the SAN). But when we run the application on a NFS home directory mount, performance goes to the dogs. It appears that the Linux kernel isn't caching anything. So it is reading every single disk block needed by mmap() accesses over and over and over again. The NFS mount is done through autofs, which has only default settings. /proc/mounts shows the NFS mount is done with the following options: rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.11.52,mountvers=3,mountproto=tcp,addr=192.168.11.52 How can I make Ubuntu 10.04 cache the file instead of reloading it all the time?

    Read the article

  • If I run two monitors from two different graphic cards, can I still have Twinview?

    - by rumtscho
    I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

    Read the article

  • Windows 7 not booting up and stuck at startup repair

    - by mikimr
    I've been having issues with Windows 7 Home Premium on a Lenovo laptop. At first, it would not start up normally at all. I started it in Safe Mode, where I disabled all non-MS services and tried again to no avail. It then goes into Startup repair where it failed several times. I tried copying the original registry settings, still the same. I resorted to booting with an Ubuntu DVD, where I ran the boot-repair, where it is supposed to correct the Windows boot. No luck. I used Win7 DVD to start up from there, where I had the option to install or repair. I chose the repair, got into command prompt, ran chkdsk /i /r, where it found 3 unreadable segments, went through the 2nd step without issues, and the 3rd step completed with some errors (can't recall the exact errors). When I restarted the machine, it went to straight to the Stratup Repair, indicating "Attempting repairs... Repairing dis errors. This might take over an hour to complete." It's been like this for nearly 15 hours. When I try to cancel or close the Startup Repair window, I get a message "The current repair operation cannot be cancelled." Should I let it run or force shut the machine? If force shut, how can I resolve this problem? Thanks.

    Read the article

  • Why does my ftp(e)s server fails like half of the time

    - by user1092608
    I have this discussion at work regarding our ftp server running via vsftpd. Initially, we have opted to serve ftpes instead of sftp because this seemed the most flexible and straightforward solution for our server to have secure file transmission. Afterwards, our ftp server seems to be a source of issues for our end users. Half of the time, users complain about not working ftp connections. I must say, i tested our FTP trough different infrastructures (=in the field, at random times at random places) and indeed, sometimes behind some configurations (=no idea how they are configured, because the 'field' testing), i recieve errors. Some of the are: Error: Failed to retrieve directory listing (filezilla) Furthermore, behind my basic home configuration, everything seems to be running fine. I (think I) did all the basic configuration checks (passive mode?, firewall for all ports?, ...) and can't seem to find the source. Being a bunch of techies at our small office, yet knowing nothing about infrastructure, some start suggesting that ftps protocol could be the source of issues. ("No, i only knew sftp so far" "Ftps is not widespread"). I, however, strongly doubt this hypothesis, since reading around on the www, asking questions on serverfault, everyone seems to deny this. So, as I would like to avoid reconfiguring, since this involves messing around in our SSH service, our virtual user setup and ftp service, i would need some advice on 1) what could be potentially the general cause? 2) do you have some general tips? 3) would you mind having a look at my configuration file? ----- General Settings ----- write_enable=YES dirmessage_enable=YES nopriv_user=ftpsecure ftpd_banner="Welcome to XXXX FTP!" hide_ids=YES hide_file=.* max_per_ip=10 max_clients=10 local_enable=YES local_umask=022 chroot_local_user=YES secure_chroot_dir=/usr/share/empty userlist_enable=NO userlist_deny=YES userlist_file=/etc/vsftp_deny_users guest_enable=YES guest_username=ftpvirtual virtual_use_local_privs=YES user_sub_token=$USER local_root=/srv/ftp/ftpvirtual/$USER anonymous_enable=NO syslog_enable=NO xferlog_enable=YES xferlog_file=/var/log/vsftpd_xfer.log connect_from_port_20=YES pam_service_name=vsftpd listen=YES listen_port=21 pasv_enable=YES pasv_min_port=30000 pasv_max_port=30030 pasv_address=foo ssl_enable=YES rsa_cert_file=/etc/vsftpd.pem rsa_private_key_file=/etc/vsftpd.pem force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES ssl_ciphers=HIGH anon_mkdir_write_enable=NO anon_root=/srv/ftp anon_upload_enable=NO idle_session_timeout=900 log_ftp_protocol=NO dsa_cert_file=/etc/vsftpd.pem Thanks

    Read the article

  • Hiding my location to websites with region-specific languages/content

    - by Tudor
    I just went to download Microsoft Secority Essentials and it enraged me as it redirected me to a site in my home language and not the default English. If I go to America, I don't want them to speak Swahili. It reminded me of all the other websites who try to do the same. I don't want my content in greek when I'm on vacation! I for one simply can't work on a computer unless the language is English (or unless there's a VERY good reason to change the language). Location aware content is only good for download mirrors, and even then I would rather pick from a list of countries myself. (or if you can't speak anything but your own language) I know websites get your location from your IP and ISP, but is there any way you can inhibit this behaviour on a browser level? Is there any Chrome/Firefox extension for it? Do I really have no choice but to hide my IP? There's all sorts of services that claim they're hiding your IP for free so that people can't log and trace your steps through the internet, but they're probably logging it themselves and making money off it. Why else would they be free? I've found that Firefox has an Option that says "Choose your preferred language when displaying pages". Haven't found anything for Chrome.

    Read the article

  • JavaScript settings are on but I still have issues with web sites using JavaScript.

    - by Mike
    I have two computers that are the same at home except I have installed Adobe Acrobat 9 Pro Extended on my main computer along with the 2010 Outlook (Beta). I have issues when I log into a website that uses pop up calendars to select the date. I pasted it below. I checked my other computer and it is fine. I've checked the Java setting and they are correct. I am at a loss. Any suggestions? Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPDTDF; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; eMusic DLM/4; .NET4.0C) Timestamp: Mon, 26 Jul 2010 22:03:59 UTC Message: 'CalendarPopup' is undefined Line: 390 Char: 2 Code: 0 Message: 'CalendarPopup' is undefined Line: 410 Char: 2 Code: 0

    Read the article

  • How to prevent an SSD from disappearing from BIOS

    - by Midimatt
    I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

    Read the article

  • Can't access YouTube

    - by Agentleader1
    I can not seem to connect to YouTube at all. If I connect directly to YouTube (youtube.com) I get this: And if I try to connect via video directly (youtube.com/watch?v=), I get this: Here's how this isn't a web issue: I have malware on my computer I believe. And the question here is, how do I get rid of it, or what possible issue could this be? I can verify this is not a website issue or wifi issue, I've tried to connect on another computer in my wifi, and it worked. It is the local machine issue. I've tried to get rid of malware at my best and also have tried to disable possible virus extensions. All can out as the same result: no help. Also, I am unable to find these hiding viruses. I used malware-bytes and Microsoft Security Essentials. Edit: This is OBVIOUSLY Windows. I am currently running on a laptop Windows 7 Home Premium 4gb ram 64-bit os Lifebook series manufactured by Fujitsu America, Inc. Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz nslookup youtube.com:

    Read the article

  • Internet compression proxy for low speed broadband?

    - by user23150
    I live in a rural location, using high-latency wireless off a local ISP's tower. My speed tests vary day to day, but I can get around 1Mb up/down. The problem is, I work with large files, uploading and downloading (HD videos, development software, etc.). It can be painful to wait sometimes. Plus I do some side contract game development, and it can be very difficult to playtest with other developers (200ms ping is a good day for me). Now, obviously it's not going to be easy to solve the latency problem without different wireless hardware. But speedwise, I am wondering if I can use some kind of compression technology on a proxy. For instance, my work computer has full access to a 26Mb down, 10Mb up connection, that is totally unused at night and the weekends. If I could run some kind of compression technology on our server, and use it as a proxy to route to my home computer, I could stand to gain some major speed. I realize that by bogging down a system with compression, I could potentially lose whatever speed gain I had. But the proxy server is a quad core xeon, and the receiving computer is a pretty decent i7 computer, so that shouldn't be a concern. I found http://toonel.net/ but it seems more geared toward very slow narrowband users, like dial-up. Plus, I would prefer to just be able to point my browser to a proxy server, rather then install software on my client machine. EDIT I thought about my question a little more, and realize I am going to need to install software on my client in order to decompress, and possible compress (for uploading). That's not a huge deal.

    Read the article

  • Is it possible to command a common router without using the web interface?

    - by MDeSchaepmeester
    Some background The internet arrangement in my student home is really weird. There is one ethernet outlet and several wifi hotspots. Either way requires a login through a web site to get internet access. This is annoying as each device needs to login seperately and with a PS3 for example, it is impossible to get connected at all since the web login procedure doesn't work. Therefore I have installed a D-Link DIR-635 router which is connected to the ethernet outlet. It has DHCP enabled so it uses NAT, but whatever it is connected to also uses NAT and I've read this should not work. A fellow student tried it with an Apple Airport but that keeps giving errors related to NAT after NAT. Anyway my setup does work so bonus points if you can clarify this. I need to login to the web site I mentioned earlier with any device, after which all devices in my LAN have connectivity. This is great. Except... In short From time to time, I lose internet connectivity and my D-Link DIR-635 router needs to do a DHCP renew. I can do this via the web interface but my life would be easier if I could just run a cmd file which tells my router to do this without all the hassle. This would setup a connection to my router and execute the proper command. I have tried googling but couldn't find much helpful stuff.

    Read the article

  • Connecting to network device behind NAT from local LAN using the external port and IP

    - by lumbric
    I noticed at several different LANs connected to the Internet through a NAT the following phenomena. There is a server in the LAN and there is a port forwarding to reach this server also from outside the LAN through the NAT. E.g. consider a LAN with the address 192.168.0.* and a SSH server at 192.168.0.2 with port 22 and a forwarding from port 2222 at the NAT 192.168.0.1 to 192.168.0.2:22. If the NAT's external IP is 44.33.22.11, one can connect to the SSH server through 44.33.22.11:2222. Surprisingly this works only from outside the LAN. If one tries to connect to 44.33.22.11:2222 from behind the NAT, there is no answer. Of course one could simply use 192.168.0.2:22, but often it is simpler to use the external IP. The typical use case for me is the configuration on a laptop computer. Usually the user uses any arbitrary Internet connection to connect to his home or office server, but sometimes he will use also the LAN to connect to it and it would be annoying to have to different configurations or bookmarks. Why does it fail to connect from inside the LAN? Is there any good work around?

    Read the article

  • Fake demostration software for command line

    - by Joe
    I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

    Read the article

  • Why does my computer not always automatically request a new DHCP lease when switching networks?

    - by KingJ
    I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease for the new network. Of course, since each network has different settings any connections will fail when using the old lease. While Windows will eventually request a new DHCP lease, it's often much faster for me to release the old lease and request a new, correct, lease. It puzzles me as to why this is not automatically done when associating to the network? One possible cause is that the laptop is put to sleep while connected to one network, then woken when in range of the other network. Nevertheless, I would expect that the lease would be renewed when the laptop associates to the other network rather than attempting to use the old lease. It should be noted that the two networks are completely different, both in terms of size, number of APs, network settings, SSIDs etc. One network is my home network and the other one is the campus-wide network at my University.

    Read the article

  • Getting PAM/user info into php - something like Net_Finger instead of a db?

    - by digitaltoast
    I've got a very small user group who just need to login, upload, check and then move specific files to a different area when ready. Right now, I use the nginx PAM auth module to log them in against their unix accounts. As their login is their home directory, I've already got the info to send the uploads to the right area - one line of php and no database needed. But I'm maintaining a separate DB just so PHP can welcome them, grab their email and send them an email when processed. Yes, sure I could use nosql or sqlite instead so as to not need a whole mysql install. But it occurred to me that as I've got all these blank user fields for phone numbers I could populate with any data, that I could use something like php's Net_Finger. Which failed for me with: sudo pear install Net_Finger Starting to download Net_Finger-1.0.1.tgz (1,618 bytes) ....done: 1,618 bytes could not extract the package.xml file from "/build/buildd/php5-5.5.9+dfsg/pear-build-download/Net_Finger-1.0.1.tgz" Download of "pear/Net_Finger" succeeded, but it is not a valid package archive Error: cannot download "pear/Net_Finger" At which point I thought I'd stop, and take a ServerFault reality check - is this a really bad/dangerous/stupid idea just to stop me having to maintain details in two places rather than one? It there a better way? Googling shows that it's not an oft-asked thing, so perhaps with good reason?

    Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >