Search Results

Search found 14079 results on 564 pages for 'folding at home'.

Page 482/564 | < Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >

• Connect from Mac OS X to Windows 7 Desktop

  - by jrn

  I am trying to connect from my MacBook to my Windows 7 machine within my own network - if it will work from outside my network that's a plus but no need to have. My Windows 7 machine is freshly installed with Windows 7 Home Premium. It runs the built-in firewall with no settings changed so far as well as Microsoft Security Essentials. So far I tried CoRD and Microsofts Remote Desktop Connections to connect from my Mac to my Windows machine without any success. I did try and disabled the firewall on my Windows machine but could not connect either. The reason I did this was to check wether there is a Windows firewall setting preventing me from connecting. On top of that I manually started the Remote Desktop Services and Remote Desktop Configuration within services.msc. Is there anything else I have to enable for a remote desktop connection? Could there be any router setting I have to tweak? Since I do not want to connect from outside my own network I thought I don't have to do any port forwarding. The error messages I retrieve are all connection timeouts. I can however ping the hostname and/or IP address. Any help would be greatly appreciated. Thanks a lot, jrn

  Read the article

• Friendly Intranet Addresses

  - by Jmyster

  Relativly new to IIS. I'm attempting to set up multiple sites in my Intranet on one server. The server already has SharePoint Installed on it and has a binding *:80. So when I type //ServerName I get the home page of SharePoint. I get how that works. I set up a new site in IIS and set the Binding to *:30015. On a remote machine if I type //ServerName:30015 in a web browser, I get the new site. Awesome, working as intended. My Questions: Can/How do i set it up so that I can type //DivisionAppName or //Division.AppName and have it resolve itself to //ServerName:30015? Is this something I have to register with my Company's DNS server? I hope not, getting my corprate IT to assist is a nightmare. What I tried: I have added Bindings with the Host Name filled in with both DivisionAppName or Division.AppName and port 30015 but that doesn't seem to work.

  Read the article

• Burning Linux ISO to DVD and making it bootable.

  - by toc777

  Hi everyone, I just downloaded the Fedora 14 Live-Desktop ISO and used CDBurnerXP to burn the image to a DVD. For some reason the first time I burned the image nothing showed up on the DVD when I accessed it even though CDBurnerXP said it had successfully burned to the disk. I did it again and the ISO shows up on the disk (I don't think this is right, should it be the files inside the image that show up on disk or the image file??). The problem now is my dell PC can't find the ISO when I try to boot from it. I get an error saying it can't boot from the CD. I have verified the ISO image as directed from the Fedora website. My question is how do I make a bootable CD from a Fedora Live-Desktop ISO? How can I verify that the ISO was written to the CD correctly and has anyone had any issues booting from a CD using a Dell desktop (I'm not at home at the moment so I can't check what model it is but its old enough, I've had it for about 5 years). EDIT: All that needed to be done was to burn the image to CD as an image and not a data file. The first three times failed, I'm not sure if this was because of faulty DVD's or if the write speed was too high (16x). I put in a new DVD and changed the write speed to 8x, the image was then properly burned to the disk without any errors. Thanks.

  Read the article

• Linux Has Become Very Slow Dealing With Large Data

  - by Kohjah Breese

  Last year I bought a computer, for around $1,800, so it is relatively high-end. When I first got it I was particularly pleased at how quick it dealt with large MySQL queries, imports and exports. But somewhere along the way something has gone wrong and I am not sure how to diagnose the problem. Any job that involves processing large amounts of data, e.g. gzipping file c. 1GB+, UPDATEs on large MySQL tables etc. have become very slow. I just performed an intensive alter statement on a 240,000,000 row table on a remote server, which is lower spec. This took about 10 minutes. However, performing the same query on a 167,000,000 row table on my computer went fine until it hit 860MB. Now it is only writing about 1MB every 15 seconds. Does anyone have any advice as to debugging what the issue is? I am using LinuxMint (based on Ubuntu 12.04.) The home partition is encrypted, which really slows down gzip. I have noticed the swap is barely used, but am not sure if that is because there is more than enough RAM. The filesystem is ext4. The MySQL server is on a separate hard drive, but it was fine when I first installed it. Other than the above issues, there are no other problems with it. I am going to install a fresh Ubuntu on the 4th hard drive to see if that is any different.

  Read the article

• Computer makes odd noise. Replace almost every component. Computer still makes odd noise.

  - by ShimmerGeek

  My PC was getting pretty old, 5 years or so, and over the course of it's life I replaced the graphics card, HDD and a couple of sticks of RAM; but the PSU, processor, motherboard, fans etc. were all original. A few weeks ago, I started hearing an odd noise. I struggle to describe it, it sounded sortof like the 'click of death' you hear when a HDD may fail, but not quite... (And it was far less irregular) Also, I was sure I heard it once or twice a minute or two after I shut down the PC. This was going on very irregularly for a couple weeks. Some days I would hear no noise at all, others I would hear it often, maybe once every 30 seconds or so. I could find no common denominator - i.e. it did not happen more during gaming or any other intensive use. Anyway, I need my PC to sit some classes over the summer, so I put it in for them to run a HDD stress test and to replace a bunch of the components. I ended up replacing almost everything - the only elements I still have are my blu-ray drive and graphics card. They said when they started to run the HDD stress test it failed instantly (They started the test and it immediately said 'Test Complete' so they assumed it was at fault, and put a new HDD in since I was still under warranty with them.) I took it home a few hours ago, and I am still hearing the noise!!! Do you guys have any theories? I'm getting a little worried, I can't afford for my PC to suddenly fail during the next month - I have a lot of coursework to do. Any thoughts? Is it possible it could be the fan on the graphics card? I'm confused because it's so irregular. Any help would be much appreciated.

  Read the article

• What can cause two "identical" setups of IE8 and XP to display things differently?

  - by ccornet

  This has been baffling me for a while. Of the machines I use in visitting Stack Overflow, two of them are machines with the same setup: Dell with Windows XP with IE8. Since they were issued to me by the same company (one to use in the office, one to use at home), they have identical setups as well. But they display certain page elements differently! One is an Optiplex GX620 desktop, the other is an Inspiron 9100 laptop, but somehow the hardware doesn't seem like something that should be overriding how my browser displays things. Nevertheless, the laptop seems to display things differently than what is expected. Differences have included the following: This issue persisted on the laptop after Jeff fixed it, but was repaired for everyone else and on the Desktop. When viewing Vote Counts on a post, the grey line is left immediately beneath the upvotes but a number-sized white space is below that before the downvotes. On the desktop, it displays properly with the two adjacent and divided by a grey line. Code blocks seem to have a blank line at the end on the laptop. The following image illustrates how the last two elements look on the laptop. So, considering that as far as I can tell, these two setups are identical (I have not messed with any settings and they were both initialized identically as well), what else could be causing the display difference?

  Read the article

• Get more space for redis in unix server

  - by DevTraveler

  In our app we have only windows servers beside the cases we use redis queues. This case , we use unix server created by amazon. As you can see we do not have a lot of space available and we want to make sure redis has enough space to work without getting stuck. I am little bit new in unix and after reading some data about the unix file system i still was not fully sure how can i give the redis drive (it is in the home directory) more space. I see the mnt that has a lot of space but read it is temporary for cd-rom and network drives. Can you help me figure out how to get more space to my redis ? If it is possible i prefer not to re-install the redis server. Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.7G 880M 89% / udev 7.4G 4.0K 7.4G 1% /dev tmpfs 3.0G 152K 3.0G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.4G 0 7.4G 0% /run/shm /dev/xvdb 414G 30G 364G 8% /mnt Thanks.

  Read the article

• When buying hardware, what sites do you trust for information? [closed]

  - by Matt Dawdy

  I won't ask "what laptop should I buy" since the information is likely to change very quickly. However, I am about to buy a laptop, and I honestly don't know where to begin researching this based on my needs. I am hoping that asking about specific sites that do reviews/recommendations that this will still be on topic. I read the 6 guidelines for subjective questions and believe that this question scores favorably. I'm starting a new job in a few weeks, and they want to know what specific laptop to purchase. I'd like to get the most for their money and get a machine that will not need to be replaced in a year. When looking at a site like Dell, it's hard to get a full picture of the performance of a laptop. Does it work with a docking station, and if so, what kinds of video outs are on it? Will it work well when compiling several large projects in .Net? Has anyone had any issues with the machine getting flaky when dragging it from work to home and back all the time? etc. So, if people would enter in their preferred sites they use when researching hardware, and why they prefer that site (x is great for laptop comparisons, y is great for gaming machine reviews, etc) the I hope that this can be a question with valuable answers to others than just myself.

  Read the article

• Windows 7 clean install becomes corrupt after reboot (repeated many fresh installs)

  - by pjotr_dolphin

  My laptop keeps crashing on boot after clean Windows 7 install. Ok, here is the story, and some fact. Computer: Samsung NP900X3C-A04HK (256GB SSD, 8GB RAM) OS to install: Windows 7 Ultimate SP1 (not from Samsung, own fresh Win) I purchased this laptop about a year ago, never booted it into the Windows Home that was installed on it, installed directly Ubuntu on the machine. Full disc encryption was the selected install, so of course it wiped the complete disc (including Samsung Recovery Partition). After some time, I felt like going back to Windows, as Windows 7 is actually quite nice. So I went to buy a fresh Windows 7Ultimate with SP1. Now to the tricky part. Windows installs perfectly, and after installing all Windows updates, drivers from Samsung, software I need, it is time for shutting it down and go to bed. Starting it up again, and it is not booting, these are the type of errors I have gotten so far (fresh installed it more then a dozen times now, and tried different suggestions from threads on the net). Windows failed to start... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. File: /boot/bcd Status: 0xc000000f Info: an error occurred while attempting to read the boot configuration data. And some other errors, not all the same. Not memory of this. I have run different disc checks, and all says my SSD is in perfect shape. Note: Soft reboots from Windows menu works, never gets corrupted. But if I Shutdown and then start it up again, this is when it happens. Can someone help me not get back to Ubunut? What can be the cause, and how can it be fixed so I do not get there problems again?

  Read the article

• CentOS and OpenSSH [on hold]

  - by Stephen

  I've recently installed CentOS 6 on an old Dell PC. I'm trying to setup OpenSSH at the moment, I been following some tutorials (http://www.youtube.com/watch?v=QKafb0koJEg) on You Tube, while they have been very helpful I'm at the point where I need to ask some questions. My goal here is to be able to access the server from my work computer and from my personal laptop (which will be on the same home network as the server). I've installed OpenSSH with no issues. So the first thing I was advised to do was port forwarding. So in the sshd_config file, I've changed Port 22 to Port xxxx (where xxxx is a obviously a four digit value). I then restart the sshd service. I've also configured my router for forward port 22 onto xxxx. Is there anything else I need to do? I've generated the keys on my laptop, and I'm trying to copy them to the server as follows: scp id_rsa.pub xxxxxxxx@localhost:.ssh/authorized_keys but this command fails with the following error message: ssh: connect to host localhost port 22: Connection refused lost connection Any help appreciated. Regards...

  Read the article

• Is a modem required to be programmed when using with an internet provider?

  - by Tim

  I wonder if a modem is required to be programmed when using with an internet provider? If yes, what is the purpose of programming a modem? Do both a DSL and a cable ISP both require a modem to be used in an individual home? For example, I have a Motorola modem SURFboard Model:SB5101, Customer S/N: xxx S/N? xxx HFC MAC ID: xxx USB CPE MAC ID: xxx a coil of cable and a splitter from Comcast High-Speed internet Self-Installation Kit, which were bought 5 years ago, when I purchased Comcast internet service from its retailer www.comcastoffers.com. With them, I was hoping to reduce the amount of fee by avoiding to ask Comcast people to come over to install. But I remember at that time Comcast sent its technician here, dismissed my idea of self-installation, saying they needed to use their own modem and charging me a hefty fee, and so my equipments have never been used. I haven't been using Comcast for a long time. I wonder if my modem, cable and splitter (brand new, never used) are still good to use with an internet provider such as Comcast? If needed, we can ignore their policy and just consider the technology side? Or they are not good to use and I must throw them away like trash? Thanks and regards!

  Read the article

• computer randomly restarting. both in game and out of game

  - by eric

  first my specs are. AMD Phenom II x4 955 processor 3.2ghz 20gb ddr3 ram 4Gb Nvidia Geforce GTX 770 850w Corsair tx850w psu Gigabyte ud3 mobo Windows 7 professional I recently uprgraded my vid card to gtx770 and upgraded my psu to the 850w thats in it now. i did a reformat with the installation of the new gpu and psu and started fresh and only have a couple programs installed (diablo3, nvidia control panel, wow, and steam). all drivers are up to date and everything is hooked up correctly. the problem is it will randomly shut down. no blue screen. just turns itself straight off and reboots after a couple seconds. occasionally i will have to unplug the power cable from the psu for a few minutes then reconnect and it will start up. it seems pretty random. sometimes it does it when my pc is just sitting there on the home screen. and sometimes it does it during games. and sometimes it doesnt do it for days at a time. i noticed the psu felt hot so i put an extra fan blowing straight onto both the psu and gpu and neither feel overly hot after it shuts down now. could it just be that it is a psu problem. the psu was taken from another machine but wasnt having this problem in that machine. i have seen a few articles online about gtx770 doing the same thing. but i havent found any answers or solutions. any help will be appreciated. im sure the 850w is enough to power my machine, im just stumped and ran out of ideas to fix it. i have even returned the video card for another thinking it might have been an issue with that particular card, but still gettin the same problem.

  Read the article

• How does the internet protocol handle network card numbers?

  - by Giorgio

  I know that data packets sent over the internet carry the source and destination IP address, so that the protocol can route the data to the correct destination and keep track of the source address of the packet. But what about the network card address? As far as I know, each network card has a unique identification number. Is this also transmitted with a TCP/IP packet? And when a packet is received at its destination, how is the IP address mapped to a network card number? In other words. On the sender part: does the sender store the sender network card number in the IP packets that it is sending? On the receiver part: which component maps the IP address to the receiver's network card number when a packet is received? E.g., in a home network, does the modem / router map the destination IP address of an incoming packet to a network card number and deliver the packet directly to that network card? A link to documentation on these topics would be of great help.

  Read the article

• How do I tunnel an HTTPS proxy through a virtual machine (VMWare)

  - by Kyle

  I have a personal setup at home using VMWare Workstation. I also have a set of Virtual Private Machines that run Squid, and therefore provide me HTTPS proxy tunnels. Using Proxifier, I can tunnel all traffic for given applications through these tunnels. However, I also have a few virtual machines for dev/staging/experimentation/etc. I generally just use NAT to provide Internet access to the machines, and if I need to use these proxies, I can just setup Proxifier (or a Linux equivalent) to pipe the traffic through them. No problem. But... I got to thinking: Wouldn't it be great if I could assign these proxy tunnels to a virtual machine, so that when I start up the VM, it has instant-on access through the tunnel and not my local connection? (EDIT: Of course, it would USE my local connection, but it would tunnel traffic through the proxy.) To be more clear: I want a solution that binds the proxy to a VM, so that when I start the VM, I don't have to use a proxy client to connect to the tunnel - I am already piping all traffic from that VM through that proxy. I did a bit of searching, and the closest thing I could find was this: How to route public static IP to a virtual machine on a vmware ESXi host? Which wasn't all that applicable. The proxies are protected by user/pass but do not filter by IP. Again, they are HTTPS proxies setup through Squid. Any ideas on how to make this happen? Thanks a ton.

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• I can get in, but I can't get out

  - by robwilkerson

  Like most technical folks, I suppose, I'm my family's primary source of tech support. I'm a developer--not a sysadmin--by trade and tonight I bumped into something I've never seen before. I'm hoping someone here has. In order to better help my Mom, I have her set up on a home network behind a Linksys router (WRT54G). She's got a Mac, so I have her router set up to forward SSH requests to her laptop's internal IP. I also have her router running DDNS through DynDns. Tonight she called to tell me that she can't access the Internet. Assuming it was one of the many simple, stupid problems most of us encounter with parents, I logged into the router admin remotely and took a look around. Everything looked normal. Then I SSH'd into her machine to check out her IP, DNS, etc. settings. Everything still looked fine. Then I noticed something weird. When SSH'd into her machine, I can't ping her router. In other words, I seem to be able to access her computer through her router, but not access her router from her computer. A traceroute dies immediately as well. Any ideas what I might try next? I've bounced her computer and even unplugged her router (it was plugged back in, of course). Thanks.

  Read the article

• My Ubuntu 10.04 server kills all WAN bandwidth when it's attached to my LAN. Where do you begin troubleshooting?

  - by rrc7cz

  First I should say that my Linux knowledge is minimal; just enough to set up some servers (Apache, Tomcat, Couch, etc). I built a MiniITX server to host some simple sites, act as an SSH tunnel while I'm away, and act as a torrent server. It was not properly secured for a long time (iptables was empty, all ports open, no firewall) though my router did not have much port forwarding set up beyond HTTP, FTP, and SSH. A week or two ago my bandwidth at home dropped from around 27Mbps to 2Mbps and my upload went from 7Mbps to 0.06Mbps. When I unplug the server from the LAN, by bandwidth shoots back up. I threw up a restrictive iptables, removed most of the port forwarding, and checked my router logs to see if there were any open connections from the server (malware?) but there were none. What would you do? What are the first things you'd check? I can of course reinstall everything from scratch, but I'd like to find the root cause.

  Read the article

• SSH connect error

  - by DMDGeeker

  I use a notebook with Ubuntu 12.10 and try to connect a server with Ubuntu 12.04. The server has already installed openssh-server. And allow publick key and password to login. But I connect the server sometime well but after minutes it will be error. First, it will show me these messages:    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!    ......    Add correct host key in /home/myname/.ssh/known_hosts to get rid of this message. but I never reinstall system and the openssh-server. Both are never changed! The server nerver shutdown or reboot. Second, after I remove the relative key from my known_hosts and use ssh connect the server again, it will let me type my password. then my nightmare coming... Permission denied (publickey,password) But I typed the correct password! PS: I used password and public key both success. But the problem will appear again after i logout then login.

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• file system damage

  - by jffrs

  I try recover the backup superblock on /dev/sda2 that contain ubuntu 12.04 LTS and partition ext4 with livecd ubuntu 10.04. the message is below root@ubuntu:/home/ubuntu# fsck.ext4 -b 163840 -B 4096 /dev/sda2 e2fsck 1.41.11 (14-Mar-2010) /dev/sda2 was not cleanly unmounted, check forced. Resize inode not valid. Recreate? yes Pass 1: Checking inodes, blocks, and sizes Programming error? block #7963637 claimed for no reason in process_bad_block. Programming error? block #11240437 claimed for no reason in process_bad_block. Root inode is not a directory. Clear? yes Inode 712 is in extent format, but superblock is missing EXTENTS feature Fix? yes Inode 98519 has compression flag set on filesystem without compression support. Clear? yes Inode 98519 has INDEX_FL flag set but is not a directory. Clear HTree index? what's the correct procedure?

  Read the article

• Can I remove the original file while running "sort"?

  - by Spaceman

  I'm sorting a huge file, around 400 gigabytes. I'm running out of the disk space and I must do something quickly. Let's assume the original file is called original_file. So I execute (simplified) it as "sort original_file | gzip -c output_file" I use /home/tmp as a temporary dir. From what I see, there are a lot of intermediate files, like so: tmpA465 tmpB154 ... and so on. The smallest ones have size 12 megabytes. The largest have ~182 megabytes. So, it seems that the "sort" command have already split the original file into small pieces, and have sorted them, and now it is merging them into bigger parts (which will be, eventually, sorted as well). Please correct me if I'm wrong. Can I remove the original file right now without terminating the sort process? I've been waiting for a few days for that and it's important that the "sort" command will not fail and I will get the result file, finally. The OS is Ubuntu server 13.04, x64. Thanks!

  Read the article

• Global Email Forwarding with EXIM?

  - by Dexirian

  Been trying to find a solution to this for a while without success so here i go : I was given the task to build a High-Availability Load-Balanced Network Cluster for our 2 linux servers. I did some workaround and managed to get a DNS + SQL + Web Folders + Mails synchronisation going between both. Now i would like my server 2 to only do mailing and server 1 to only do web hosting. I transfered all the accounts for 1 to 2 using the WHM built-in account transfert feature. I created 2 different rsync jobs that sync, update, and delete the files for mail and websites. Now i was able to successfully transfer 1 mail accounts from 1 to 2, and the server 2 works flawlessly. All i had to do was change the MX entries to point to the new server and bingo. Now my problem is, some clients have their mail softwares configured so that they point to oldserver.domain.com. I cant make the (A) entry of oldserver.domain.com point to the new server for obvious reasons. I thought of using .foward files and add them to the home directories of the concerned users but that would be very difficult. So my question is : Is there a way to configure exim so that it will only foward mails to the new server? I need to change all the users so they use their mail on server 2 without them doing anything. Thanks! EDIT : TO CLARIFY MY PROBLEM Some clients have their mail point to oldserver.xyz instead of mail.olderserver.xyz I want to know if i can do something to prevent modifying the clients configuration I would also like to know is there is a way to find out what clients aren't properly configured

  Read the article

• how to throttle http requests on a linux machine?

  - by hooraygradschool

  EDIT: here is the summery: i need to reduce max connections preferably system wide on Ubuntu 11.04 but at least within Google Chrome. i do not need or want to throttle bandwidth, Verizon seems to only care about the number of connections so that is all i want to change. also, i don't want to use firefox unless i have to, i have three other machines all using chrome and synced and i just prefer it over firefox. i use tethering for my home internet connection via my verizon cell phone. without paying for it. this works just fine for streaming netflix via my nintendo wii and pretty much every other conceivable use ive had for it. except, during heavy usage with multiple tabs open on my laptop, the network connection on my phone will just turn off, then on again, then off, but it never fully connects. i think, based on this and other questions that this is caused by verizon getting too many http requests from my phone. is there some software, script, setting or otherwise that would allow me to throttle my requests to say, 5 or 10 or whatever it turns out is 1 less than verizon is looking for, so that my cell's network connection is not lost? i would far prefer a slow down rather than complete shut off of my internet connection. i am almost certain is from quantity of requests and not related to data, because, as i mentioned, netflix will run all day without a hitch, and that uses more data than anything else i would be doing. if i had a router i am pretty sure there are settings i could easily change to only allow so many requests at a time ... but in this case, my phone is my router, so no settings. im using ubuntu 11.04 on my netbook with an htc incredible on verizon (not that the phone details are relevant) i have been trying to figure this out for quite some time, currently the only fix is ensure that all requests are stopped and then sometimes it works again, other times i have to manually turn my 3g service off and then back on. thank you so much for any assistance!

  Read the article

• Can't connect to FTP server from a specific location

  - by wv_pip

  Last week while uploading website files to our server via FTP, the transfer failed. Ever since then, I haven't been able to connect to the server from work. I can connect just fine from home, or by using an FTP app on my cell phone as long as I'm on the cell network. I can't access the server from any machine on my work network. It's not a credential issue, either. The error message that I always get says that a connection cannot be established, and I am never prompted for my credentials. I have changed absolutely nothing on our domain controller or our firewall/router. I've contacted our ISP (who hosts the website/FTP server) and they can't find anything wrong on their end. They insist that it must be something here at the office that is blocking access. I've also tested access to other FTP servers (ea.com, nvidia.com, etc.) so I know that port 21 is not being blocked. I'm totally stumped. Any help is much appreciated. EDIT: wireshark info here: http://www.cloudshark.org/captures/85a118ae9296?filter=ip.dst%3D%3D66.118.64.208

  Read the article

• Allow more websocket connections

  - by Switz

  I want to load balance my node.js (DerbyJS to be specific) application on a basic Linode (512MB ram). It can probably take more than one process running at once. The querys/database does not concern me as I'm not doing anything intensive. The problem at the moment is that it can only handle up to ~40 websocket connections at once. I would love if I could get that number in the few hundred+ range. I anticipate a lot of traffic on launch due to the fact that it's a highly niche community with an engaged audience, but after it should be fine with just ~20-40 connections at once, which it handles perfectly as of now. I don't mind spending a bit of money for a week or two worth of running, but I also don't want to switch production environments. How can I test the process to see how many instances I am able to run on the box? Will increasing the number of processes increase the amount of websockets I can handle, or is that a limitation of the server's network? I have an old Macbook Pro running Linux sitting next to me that has 2GB ram and a 2.8 Dual Core Processor. Could I use this to handle some of the extra load? I could probably load balance with nginx to its IP. I'm on a FiOS home network. If you have any suggestions, I'd really appreciate it. Thanks

  Read the article

< Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >