Search Results

Search found 14079 results on 564 pages for 'folding at home'.

Page 481/564 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

• I have to manually change the DNS suffix order every time I connect to VPN. Can I change this permanently or fix the problem somehow?

  - by CarlB

  Sorry in advance but I'm a programmer, not a network engineer, so I'm a noob at this stuff. Anyway, when I am not connected to VPN from my work PC at home, I have the following DNS suffixes listed (real domain names substituted): enterprise.org network.org company.com us.enterprise.org After connecting to VPN, one more DNS suffix is added to the very top of the list: problem-domain.com At this point, most network functions that I can normally perform when actually connected to the LAN in the office are unusable. I get error messages about the network paths not being found and what-not. Anyway, I played around with the suffixes and realized that if I just moved problem-domain.com down one spot to the second in the list, all the problems went away. Unfortunately, it returns to the top spot every time I reconnect, and I tend to get disconnected frequently. Is there something else I can do about this or should I just contact the IT department? I've had this problem before and they weren't able to resolve it but I suppose it would be worth trying again if I could get a different person on the job. What I don't understand is that I thought it didn't matter what order the suffixes were in? Isn't Windows supposed to go through each suffix until it finds a match (or has gone through all the suffixes)? Why is it quitting after the first one? Thanks in advance.

  Read the article

• How should I configure my Apache Hosts File to serve a different site for localhost than for my domain/publicip?

  - by rofls

  I'm trying to test out a LAMP (with PHP5 specifically) setup with Django already serving a website. I want to do the PHP stuff on localhost for now, so that when I do something like this: curl http://localhost/database/script.php?var=1, I get a response from the php server. Right now I'm getting a Django error. I tried something like this in the default file in sites-available: Listen 80 <VirtualHost aaa.bbb.ccc.ddd> ServerName localhost DocumentRoot /home/phpsite </VirtualHost> where aaa.bbb.ccc.ddd is the local ip address, and changing my actual site's settings to specify the public ip, like this: Listen 80 <VirtualHost www.xxx.yyy.zzz> ServerName mysite.com DocumentRoot /srv/www/mysite WSGIScriptAlias / /srv/www/mysite.wsgi </VirtualHost> but then I start getting all kinds of errors when I start apache, such as port ::[80] is already in use or something. I noticed that the hosts file that's located in /etc/apache2/ is apparently pointing everything to mysite.com, including my local ip as well as 127.0.0.1 and 127.0.1.1; Do I need to change the configuration there too?

  Read the article

• Plesk command working in manual script, not in cronjob

  - by dsaunier

  Hi, In order to install a hosting plan, I use Plesk's commands in SSH as specified in their official guide. When typed directly in SSH (Putty), it works perfectly. The line is as follows with obviously values hard coded when in CLI: /usr/local/psa/bin/domain --create '.$url.' -owner mynamehere -ip '.IP_SERVER_PLESK.' -status enabled -hosting true -hst_type phys -login '.$ftp_user.' -passwd '.$ftp_pw.' -www false -php true -php_safe_mode false -hard_quota 100M I then put that request in a php script that does other things after hosting is installed. Now for the weird part: when calling that script from CLI it also works fine, I do a ./myscript.php and it installs the hosting, then sends emails etc. However after I create a cronjob to have that same script called regularly, then the Plesk command fails. The cronjob is started in Plesk as */15 * * * * /usr/bin/php /home/scripts/myscript.php and it works fine for everything BUT the Plesk hosting install, that returns "Unable to read Control Panel configuration file" and therefore does not install the domain hosting. Still this is the same script that I call manually ! On that server are the PHP used to call a cronjob and the one used in CLI different ? What do I miss, help greatly appreciated ! Regards.

  Read the article

• I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

  - by anonymous

  Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

  Read the article

• RDP with multiple monitors, display preferences get reset?

  - by Martijn Kooij

  Problem: When I connect to my pc at the office via RDP all the application windows I had previously carefully placed on either monitor 1 or 2 will be "scrambled". Either all applications show on monitor 1 and monitor 2 is empty, or they have switched 1 <- 2. Expected behaviour: When I connect I see all the application windows on exactly the same position and in the exact same size as I left them the night before. I have the exact same monitors at home as I have at work: Primary 2560x1440, Secondary 900x1440. Yesterday I tried switching the physical cables on the host machine hoping that the hardware order of the monitors was the difference. But this morning my secondary monitor was completely blank, not even the taskbar (which I had set to ONLY show on the secondary). Somewhere there must be something to help Windows understand which physical monitor is which virtual RDP monitor is which RDP "server" monitor... Are there more options than switching the cables? This one has been bothering me for a long long time now, I hope someone has a solution or workaround for me. Edit I want to use both monitors, so I have checked the "Use all monitors" setting in the RDP client. For example I leave my mail and total commander on the right monitor, and visual studio and Firefox on the left monitor. When I connect to RDP I want to see those applications on the same positions and sizes.

  Read the article

• Inexpensive (used) hardware for Xen virtualization test?

  - by Jason Antman

  Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

  Read the article

• zsh : How to list directory content with tab?

  - by Philippe CM

  I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

  Read the article

• Keyboard shortcut for moving a window to another screen

  - by wcoenen

  When working with two (or more screens), a common problem is that launched applications appear on the "wrong" screen. I especially find this annoying when launching a text editor from the command line, because I have to leave the home row with my right hand in order to drag the window to the "right" screen before I can continue typing. Is it possible to define a keyboard shortcut which moves the current application to the other/next screen? Edit: I'm using Windows XP, but it's good to know that the feature already exists in Windows 7. Edit2: I went for the autohotkey script. This adaptation works for me: #q:: WinGetPos, winx, winy,,, A WinGet, mm, MinMax, A WinRestore, A If (winx > 1270) { newx := winx-1270 OutputDebug, Moving left from %winx% to %newx% } else { newx := winx+1270 OutputDebug, Moving right from %winx% to %newx% } WinMove, A,, newx, winy if mm=1 WinMaximize, A Return I did have to make use of the OutputDebug statements and dbgview to discover the proper threshold value 1270 for moving left or right. The exact threshold is especially important when moving maximized windows to the left.

  Read the article

• 2 Web Servers, 2 Domains, 1 WAN IP configuration

  - by Tillman32

  The Problem: I have 2 domains, 2 web servers, 1 WAN IP. This is on a home network, so I don't have any crazy router or anything with the right tools, at least I don't think I do. I have a Dlink DIR-655 router. I need to be able to forward the website to the right box. 1 server is hosting www.site1.com, and the other should be hosting, www.site2.com. I forwarded the domain, to a port that is forwarded to that box. wanip:1235, 1235 is then forwarded to the internal IP of site2's server. But when I go to www.site2.com I get the 404 page of www.site1.com. I need www.site2.com to go to the right server. Is this something I can do in the virtual hosts of www.site1.com or is it something else. Also, if this isn't entirely possible, or if its a big process, I can just move www.site1.com to the www.site2.com's server, and use virtual hosts, that is an option that I would be okay with.

  Read the article

• Permissions for Multiple User VPS

  - by adnymarc

  I have a Linode VPS server that I have recently setup and am migrating to from Mediatemple, where I have a VPS managed by Plesk. I dislike the Plesk interface and the mess it makes of a lot of things, but appreciated its ability to allow multiple people access to different domains on a server. I have most everything setup the way I would like it, but am having issues with permissions for my domain directories. I am running Ubuntu 8.04 LTS and Apache 2 as my web server. I have domains successfully located in /var/www/vhosts/domainname.com but have to modify files as root in order to add/change files for the domains. I would like to setup access with the following criteria: Each domain can have a user assigned to it (and allow for the same user to manage multiple domains - could even create symlinks in their home folder to their domains) Certain users will have shell access and may be chrooted to the domain directory they control FTP needs to be setup and able to correctly access the domains so that content editors for each domain can upload/download without permissions issues I am relatively new to linux sysadmin and have searched for a good guide to help solve these issues but haven't been able to find one yet. Thanks in advance for your help.

  Read the article

• solution for an offline server

  - by dashmug

  I'm trying to setup a development server at work that will ideally be able to test drive a couple of projects in PHP, Rails, or Django (not always running at the same time). I develop the apps locally on a Mac and then I'll put the projects up on this server for testing with my actual users (non-techies) before deploying to a production server. My problem is that we have a very poor internet connection (almost negligible) at work and doing the usual apt-get/yum/ports (make, clean, install) processes for setting up servers always get their packages from online repositories somewhere. I know I could probably download the source and then compile them myself but that's going to be too much of a hassle for me. I'm thinking about two solutions: Plan A: Run a server VM on my Mac and then use this VM as the source repository for the offline server. I've read about Ubuntu's apt-proxy and it seems to be good enough though I haven't tried it yet. I'm not sure if this is possible but can I simply do apt-get install nginx --downloadonly so that the package and its dependencies will be downloaded into my VM and my server can use the VM as the source repo for apt-get? Plan B: Run a server VM on my Mac (which I can setup/update easily when I'm home) and then clone the VM to the offline development server. Maybe I should simply make the server a VM host so I can simply copy the VM over. I think this is okay for the first-time setup but subsequent updates will take too long (cloning the VM image). If I was working on Windows, I imagine it'd be easier because most services have an installer file that I can download and then run at the server. If you could suggest another way, it would be much appreciated. Update: From Michael Hampton's answer, I found a possible solution which is apt-cacher. I also found this page on Ubuntu's website. I wonder if there is a better tool than this one.

  Read the article

• SVN very slow over HTTP (seems auth related)

  - by Sydius

  I'm using SVN version 1.6.6 (r40053) via the command-line in Ubuntu 10.04 and connecting to a remote repository over HTTP that is in the local network. For a while, it worked fine, but has recently become very slow for any operation that requires communication with the repository, however it does eventually work after several minutes (~3m for svn up). Looking at Wireshark, it appears to be taking a full minute between the HTTP auth denied and the subsequent request containing credentials. The issue is local to my machine because other coworkers running Ubuntu are not having the issue and I've tried using my credentials from another machine and it was very fast. I tried deleting the .subversion folder in my home directory and checking everything out fresh, but it didn't help. Update: I think it's auth related. When I check out SVN repositories off of the Internet over HTTP (from Google Code, for example), everything is very fast until I do something that requires a password. Before prompting for the password for the first time, it stalls for at least a minute. Update 2: I set the neon-debug-mask in the SVN settings (in /etc/subversion/servers under [Global]) to 138 and it seems to spending a lot of time on 'auth: Trying Basic challenge...'

  Read the article

• Noob with git repository on Windows Storage Server 2008?

  - by HibbyHoo

  I have a Western Digital Sentinel at home running Windows Storage Server 2008 R2 Essentials. I have several git repositories on it for my own personal projects, and have no problem pushing and pulling over my local network. I want to be able to access those repos remotely from anywhere. I am able to log in and remotely access folders and files on it, but I cannot clone repos using the same address. It hangs for a REALLY long time before finally failing with an error: git.exe clone --progress -v "https://myIpAddressHere/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git" "D:\repo" Cloning into 'D:\repo'... error: Failed connect to myIpAddress:443; No error while accessing https://myIpAddress/Remote/fs/files.aspx?path=%5C%5Cmydevicename%5Cmyreposfolder%5Cmyrepo.git/info/refs fatal: HTTP request failed git did not exit cleanly (exit code 128) I'm not too privy to networking or web development, and I have only a rudimentary understanding of how to use git (with TortoiseGit). I'm having a hard time finding search results for this specific problem and a hard time interpreting generic tutorials for the general scope of this problem. TortoiseGit version: 1.7.13.0. git version: 1.7.10.mysysgit.1.

  Read the article

• where is my disk space?

  - by user166241

  I recently had a problem with .xsession-errors file - it became very big ( 90GB) and took all disk space: How I can check what takes disk space in /tmp?. I cleaned it with command > .xsession-errors but after an hour it became large again. So I deleted it (rm .xsession-errors) - it helped because it wasn't recreated but again after hour disk space disappeared - now there is no .xsession-errors anymore but I don't know where is the memory: df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 106640456 101223392 4 100% / udev 8166744 8 8166736 1% /dev tmpfs 3270224 972 3269252 1% /run none 5120 0 5120 0% /run/lock none 8175552 152 8175400 1% /run/shm du -sc * .[^.]* | sort -n 0 initrd.img 0 initrd.img.old 0 proc 0 sys 0 vmlinuz 0 vmlinuz.old 4 cdrom 4 lib64 4 media 4 mnt 4 selinux 8 dev 12 srv 16 lost+found 68 tmp 1124 run 3396 lib32 5164 .rpmdb 5540 root 8888 sbin 9120 bin 17132 etc 106080 opt 116956 boot 861908 lib 3530584 usr 3821836 var 13371260 home 21859112 total So there is around 100GB used but executing du -sc * .[^.]* | sort -n in root directory finds only ~21 GB - so what takes 80GB?? How to check it? I suspect that when I deleted the `.xsession-errors' file the errors were redirected somwhere else - but where?

  Read the article

• Routing Traffic With OpenVPN

  - by user224277

  Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

  Read the article

• Variable host IP address in iptables rule

  - by DrakeES

  I am running CentOS 6.4 with OpenVZ on my laptop. In order to provide Internet access for the VEs I have to apply the following rule on the laptop: iptables -t nat -A POSTROUTING -j SNAT --to-source <LAPTOP_IP> It works fine. However, I have to work in different places - office, home, partner's office etc. The IP of my laptop is different in those places, so have to alter the rule above each time I change place. I have created a workaround which basically determines the IP and applies the rule: #!/bin/bash IP=$(ifconfig | awk -F':' '/inet addr/&&!/127.0.0.1/{split($2,_," ");print _[1]}') iptables -t nat -A POSTROUTING -j SNAT --to-source $IP The workaround above works. I only still have to execute it manually. Perhaps I could make it a hook executing whenever my laptop obtains an IP address from DHCP - how can I do that? Also, I am just wondering if there is an elegant way of getting it done in the first place - iptables? Maybe there is a syntax allowing to specify "current hardware ip addres" in the rule?

  Read the article

• Windows 7 system freezes: would like to know if they could be related to MrxSmb, Event ID 8003 errors

  - by lifegoeson

  First, this question centers around a home network. Is it okay to ask here? Or should I go to SuperUser? (I see less answers over there, but I'll go there if that would be more appropriate.) Network setup: 1 Machine running XP Pro 1 Machine running Win7 Ultimate Comcast router Linksys WRT610N Wireless router The Win7 machine goes into a total, unrecoverable system freeze frequently. I was tearing out my hair trying to ascertain a cause, but I noticed that it usually seems to correspond with performing operations on the shared folders on the XP machine. The last 2 occasions that the Win7 machine froze, I saw this entry for Event ID 8003 from source MrxSmb in the Event log of the XP machine: The master browser has received a server announcement from the computer WIN7_COMPUTER that believes that it is the master browser for the domain on transport NetBT_Tcpip_{320B32A7-FED9. The master browser is stopping or an election is being forced. My question is twofold: Could this cause a Win7 system freeze? If so, what could I configure differently on my network to stop these conflicts over who is the master browser? Thank you for your help!

  Read the article

• Cheated!! Please help

  - by Rohit K

  I was experiencing some hard disk problem with my HP laptop. It showed at bootup as system diagnostics are run -- Smart Drive attribute failed. Also i repeatedly got a warning for imminent hard drive failure and thus to back up my data. So i gave my laptop to authorized HP service center for repair. They formatted my hard disk and installed a pirated copy of Win 7 Ultimate (i earlier had genuine Win 7 Home Premium running on my laptop) and they told me they cover out-of-warranty issues and even charged me for it. What's worse is that the hard drive problem is still present and all i am left with is an illegal copy of windows which i think also voids my warranty. What should i do? I mean i did purchase a genuine Windows with my laptop, so there must be some way to reinstall it even when i don't have a genuine copy now on my machine. Can't i get legit keys to reinstall Win 7 from Microsoft because i did pay for the software when i purchased my machine. And if that's not possible, how can i claim warranty and get my hard disk replaced by HP?

  Read the article

• Will the removal of NAT (with the use of IPv6) be bad for consumers? [closed]

  - by Jonathan.

  Possible Duplicate: How will IPv6 impact everyday users? (World IPv6 Day) As I understand when we have finally made the switch to IPv6 not only will NAT be unnecessary but it is incompatible with IPv6? Will that mean that ISPs will have to serve multiple IP addresses per customer? Will they provide a range of addresses for each customer or as each device connects will they get an IP address that isn't necessarily near that of the other devices in their house? But overall will this be bad for the Internet users? as surely it will allow ISPs to see exactly how many devices are being used, and so allow them to charge for the use of additional IP addresses? And then if that happens, what happens when you try to connect an extra device to your network? Will it simply not get an IP address? In my home we have about 15-20 devices connected at once, but for places where there are hundreds of devices, it seems like the perfect opportunity for ISPs to charge more? I think I may have it completely wrong, so is there somewhere where there is an explanation of who things will work when IPv6 becomes the norm?

  Read the article

• Older monitor not working with HDMI to DVI cable (from ultrabook)

  - by ShellfishGene

  I have a Lenovo Yoga ultrabook which only has a HDMI port. I bought an HDMI to DVI cable, and it works as expected with a LG monitor in my office. As soon as I plug it in the screen is cloned. At home I have an older Dell UltraSharp 2005fp, and for that one it does not work. When I plug the cable in "something" happens, the monitor goes from the "no signal" screen to black. On the laptop however nothing happens. In the Windows 8 display setup I don't have another monitor, clicking "detect" does not find one either. I can manually set a second display for cloning or extending, but never get a picture on the Dell. Connecting my media player thing with the cable to the Dell monitor works for when the player displays it's logo at a low resolution, but when it goes into 750p mode after booting the picture also goes away. Mabye that's due to HDCP though. Any ideas? Something to do with Windows 8, or DVI versions?

  Read the article

• SSO to multiple websites from Sharepoint website

  - by Aico

  We have an intranet based on Sharepoint 2010. In this intranet we have several links to other webservers within the same Active Directory, for example a link to our Outlook Web Access site on our Exchange 2010 environment. We have three different setups which visit this Sharepoint environment and the other webservers: Windows 7 clients that are a member of the Active Directory Home pc's that connect through a SSL VPN appliance Standalone thin clients (Windows 7 embedded) within the corporate network The goal is to let people only sign in once. In the first group this isn't a problem because the AD Integrated Authentication works fine and the Windows logon is passed on to Sharepoint and the other webservers. The second group is also working fine because of the LDAP integration that the SSL VPN appliance uses. The third group is however experiencing issues. They need to enter their credentials everytime they click a link to another webserver. They first need to enter credentials for accessing the Sharepoint environment. When clicking the link for their webmail they have to re-enter their credentials, and so on. Can someone tell me what the best solution would be to also get SSO working fine for the third group? Some extra information: We also have a Forefront TMG server in our environment. I read somewhere that Forefront might be part of a solution for this problem, but not sure how. Maybe someone here can help me? Look forward to some help. Best regards, Aico

  Read the article

• How to train users converting from PC to Mac/Apple at a small non profit?

  - by Everette Mills

  Background: I am part of a team that provides volunteer tech support to a local non profit. We are in the position to obtain a grant to update almost all of our computers (many of them 5 to 7 year old machines running XP), provide laptops for users that need them, etc. We are considering switching our users from PC (WinXP) to Macs. The technical aspects of switching will not be an issue for the team. We are in the process of planning data conversions, machine setup, server changes, etc regardless of whether we switch to Macs or much newer PCs. About 1/4 of the staff uses or has access to a Mac at home, these users already understand the basics of using the equipment. We have another set of (generally younger) users that are technically savvy and while slightly inconvenienced and slowed for a few days should be able to switch over quickly. Finally, several members of the staff are older and have many issues using there computers today. We think in the long run switching to Macs may provide a better user experience, fewer IT headaches, and more effective use of computers. The questions we have is what resources and training (webpages, Books, online training materials or online courses) do you recommend that we provide to users to enable the switchover to happen smoothly. Especially, with a focus on providing different levels of training and support to users with different skill levels. If you have done this in your own organization, what steps were successful, what areas were less successful?

  Read the article

• New i7 is slower than old Core 2 Duo? Why? (BIOS programming)

  - by DrChase

  I've always wondered why the companies who make BIOS' either have terrible engineering psychologists or none at all. But without wasting your time further with random speculative questions, my real question is as follows: Why does my new computer run slower than my old computer? Old Computer: Intel Core 2 Duo CPU @ 3.0 Ghz (stock) 4GB OCZ DDR2 800 RAM Wolfdale E8400 mb nVidia GeForce 8600 GT New Computer: Intel Core i7 920 @ ~3.2 Ghz 6 GB OCZ DDR3 1066 RAM EVGA x58 SLI LE motherboard nVidia GeForce GTX 275 Vista x64 Home Premium on both. "Run slower" is defined as: - poorer FPS performance in the same games, applications - takes longer to start up - general desktop usage (checking email, opening up files, running exe's) is noticeably slower At first I thought I must've not set something up in the BIOS or something. But I have no idea how to set anything in the bios except for "Dummy O.C.", which brought me to ~3.2 Ghz. But beyond that I have no idea. I've been reading stuff about "ram timing" and voltages and the like but I really have no idea about that stuff. I'm a psychologist who has a basic understanding in building his own computers, not a computer scientist. Can someone give me some wisdom that might guide me to the reason my new computer is worse than my older one? I'm sorry if this is a bad question, or not appropriate to SO. I'm just pretty frustrated now and you all have helped me in the past so I figured I'd give it a shot. Thanks for your time.

  Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >