Search Results

Search found 1886 results on 76 pages for 'dragon naturally speaking'.

Page 48/76 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• VPS Memory Exchausted Even With Light Settings

  - by user101570

  Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

  Read the article

• KVM Hosting: How to efficiently replicate guests

  - by javano

  I have three KVM servers each with 1 guest VM, running directly on it's local storage, (so they are essentially getting a dedicated box worth of computing power each). In the event of a host failure I would like the guests replicated to at least one of the other hosts so I can spin it up there, until the failing host is fixed. I am curious about KVM cloning. I can clone a VM live or when it's suspended/shutdown. Obivously suspended VMs will naturally be quicker to clone but these three VMs comprise three parts of a single solution, so I don't want to ever have any one of them shutdown. How can I efficiently clone these VMs between servers? I have had a couple of ideas, but are these insane or, is there a better method I have missed for my scenario? Set up a DRDB partition between box 1 and 2 where VM 1 runs from, and so is replicated between box1 and box 2, repeat between box 2 & 3, and box 3 & 1 (This could be insane, I have never used DRDB only read about it) Just use standard KVM CLI clone options to perform live clones (I'm dubious about this because I don't know how long it will take and what the performance impact will be during) Run a copy of each VM on at least one other host, and have the guest on one host export it's data to the matching guest on another host where it can import that data, scripting this on the guest) Some of other way? Ideas welcome! Side Note These servers have 4x15k SAS drives in a RAID 10 so they aren't rocketing fast, and as I mentioned, each VM runs from the host's local storage, no NAS or SAN etc. So that is why I am asking this question about guest replication. Also, this isn't about disaster recovery. Guests will be exporting their data to a NAS over a VPN, so I am looking at how I can have them quickly spun up in a host failure situation.

  Read the article

• Why is my rsync so slow compared to pure cp or even scp?

  - by nfm

  I'm transfering the files from Linux to Windows 7 via a mounted share (the share is mounted from Windows on Linux).. I'm copying lots of data (i.e. nearly a TB) from the old to the new machine within my LAN. I'm unfortunate enough already that I only have 100MBit. Naturally I blindly used rsync but already wondered after a day why it feels so slow. Enabling the progress meter showed my a transfer rate of about 2MBit/s . So I took a reasonable big file (800MB) and tracked the transfer timing: cp : 05:33 scp (*): 06:33 rsync : 21:51 *) scp via localhost to the same Linux machine directly onto the share; completely useless but provided a progress meter The tests were as simple as (cp|scp|rsync) <source> <destination> No special arguments except host/port for scp. I even tried the -W switch for rsync but cancelled after ten minutes. rsync is 3.0.3 running on Lenny. To be able to interrupt the copy process anytime and resume lead me to rsync, but now I think I seriously need to reconsider this requirement. How's such a big difference possible?

  Read the article

• What is a suitable simple, open web server for Windows?

  - by alficles

  I'm looking for a dead simple web server for Windows. Load will not be high as it will be primarily serving binaries for a WPKG update service. It needs to serve the entire contents of a single folder over HTTP on a configurable (high) port. No CGI or other scripting is required, but it might be nice for future features. I started with Mongoose, since it doesn't even have an installation requirement (a very nice perk), but it fails to start when run as a service. (Technically, it acts as it's own installer.) I've investigated LighTPD as well, but it appears to be minimally (at best) tested on Windows. And naturally, I'm looking for something free. As in beer is good, but speech is better, as always. Edit: I didn't mention this initially, but non-tech people will be doing the install. They'll have whatever script I write for the install, but the goal is a simple system that is easy to troubleshoot. (I almost worded this question "What is the best...", but Serverfault rightly observed that that is a subjective question. And it's really not an optimization problem, any suitable solution will work. I just can't seem to find one for Windows.)

  Read the article

• How do I restore tab-completion on shell variables on the bash command-line?

  - by Eric

  I've long set my most-recently visited directories to shell variables d1, d2, etc. On an ancient Fedora machine I could type a command like $ cp $d1/ and the shell would replace $d1 with text like /home/acctname/projects/blog/ and would then show me the contents of .../blog, like any tab-completion. Now, both ubuntu wheezy/sid and fedora 16 just -escape the '$', and naturally there are no completions to show. You can see this behavior in action in an OSX Terminal window. On 10.8, do something like ls $HOME/ to see what I mean. Is there a bash shell variable or option that can restore the old behavior? man bash suggests this is a bug: complete (TAB) Attempt to perform completion on the text before point. Bash attempts completion treating the text as a variable (if the text begins with $), username (if the text begins with ~), hostname (if the text begins with @), or command (including aliases and functions) in turn. If none of these produces a match, filename completion is attempted. I get the above described completion when a token starts with '~' or a letter. It's just '$'-completion that's broken.

  Read the article

• Windows Vista freezes

  - by Kakurady

  Windows Vista (32-bit) would randomly freeze on my computer, usually 15-30 minutes after login but can happen just after login. All applications would stop responding and the hard drive will not make any sound, and after a while, the mouse cursor will also stop moving. I dual-boot Ubuntu, and that still works fine. It started with the computer freezing when loading Team Fortress 2. Alt-Tab and Ctrl-Alt-Del have no effect, and the hard drive does not make any sound. I tried to verify the game data using Steam and that freezes the computer too. So I stupidly reinstalled the game. Now the game doesn't freeze when it starts, but instead the whole computer randomly freezes. This computer is a Dell XPS M1530 with a 320GB (298GiB) drive (WDC WD3200BEVT-7) split 5-ways, with Windows and Linux a partition each, one more for Linux swap space, and another two partitions for Dell diagnostic program and factory image and drivers. There was once where the hard drive would make clicking noises all day, and only stopped when I rebooted the computer. Since then, the BIOS diagnostics would fail the drive (for "self-test log contains previous errors") whenever ran. (The on-disk diagnostics cannot be run because I overwrote the MBR with GRUB.) Naturally, I thought the hard drive could be the problem. CHKDSK found one bad sector, but this seems to have no effect. System File Checker found two protected files with wrong hashes, one is some kind of IE manifest, and the other is a tcpmon.ini. Neither of them can be restored because their back up copy also have wrong hashes. Nothing about system failures in the event viewer. What should I do next?

  Read the article

• Is there a way to have "default" or "placeholder" values in Excel?

  - by Iszi

  I've got a spreadsheet with cells that I want to be user-editable, but that I also want to have "default" or "placeholder" values in, whenever there is no user-entered data. There's a couple good use cases for this: Prevent formula errors, while providing reasonable assumptions when a user has not entered (or has deleted) their own value. I could use conditional formatting to alert the user to default values, so as to prevent their ignorance of them - they can then make an informed choice as to whether that value is still appropriate or not for the intended calculations. Give a short description of what is intended to be entered in the cell, without having to have a separate "instructions" segment or document. This would also eliminate the need for a nearby "Label" cell, in some cases where it's really not appropriate. To accomplish what I want, I need some formula, script, or other advanced spreadsheet option that will do the following: Show the default value in the cell before user enters data. Allow the default value to be found by any formulas referencing the cell, when there is no user-entered data in that cell. Allow the user to freely (naturally, exactly as they would do with any "normal" cell) overwrite the displayed value with their own value or formula, and have the user-entered data found by any formulas referencing the cell. When cell is blanked by deletion of user input, revert to default value. Is there a way to do this in Excel, or am I asking too much of a spreadsheet program here?

  Read the article

• nVidia performance with newer X and newer driver abysmal with Compiz

  - by Nakedible

  I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

  Read the article

• What is the name of the this DOS font? Where and how to add it? Why is there a 1 pixel gap?

  - by JBeurer

  So basically I somehow stepped into this webpage: www.braindamage.vg And the first thing that hit me hard was the lovely DOS fonts, so naturally I wanted to get them into my IDE badly. Opened the html source file and CSS file to find the font name: @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.eot'); } @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.svg#dos') format("svg"), url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.ttf') format ('truetype'); } So I download the font, add it using Control Panel - Fonts. But once I start using it (notepad, MSVS 2008 & MSVS2010) I notice that it looks slightly off: It seems like there's 1 extra pixel between each character. How it should look: What is causing it and how to fix this? Is it the windows XP? (i have disabled font smoothing) Or is there something wrong with the font file?

  Read the article

• Apache Virtualhost entry with Windows hostname

  - by gshauger

  I have a Windows Domain Controller and we use it for DNS for our internal network. I have an Ubuntu box with an IP address of 172.16.34.149. Within the Windows DNS I created the forward and reverse lookup entries for the name Endymion. Naturally when ever I FTP/SSH/HTTP/etc to the hostname Endymion it resolves correctly to my Ubuntu box. I wanted to do some web development on this box for an existing site. There were problems when I placed the website in a subfolder of /var/www/. Let's just say it was in folder /var/www/projectx/. The issue involved the incorrect resolution of non-relative urls. So I figure I could create a new DNS entry for the hostname projectx. Sure enough when I FTP/SSH/HTTP/etc to the hostname projectx it takes me to the same ubuntu box as the hostname Endymion...this is what I would expect. I now have two hostnames for the same box. I then create a Virtualhost entry in httpd.conf that looks like the following: <VirtualHost *:80> DocumentRoot /var/www/projectx ServerName projectx ServerAlias projectx </VirtualHost> Sure enough when I go to a browser and type in http://projectx/ it takes me to the correct subfolder. Everything works!!! Not so fast. I then go to http://endymion/ and instead of taking me to /var/www/ it takes me to /var/www/projectx/ Clearly I'm missing something. Help please! ;)

  Read the article

• Upgrading to Java 7u65 breaks my Deployment Rule Set for Oracle applications

  - by Don Atreides

  My company uses an older version of an Oracle application that requires Java 6u45. Naturally we want to be secure, so we use a Deployment Rule Set to specify 6u45 for that internal application and let other applications use 7u60. Now that we're ready to upgrade the Java 7 half to 7u67, the Oracle application breaks with "Deployment Rule Set required version 1.6.0_45 not available." Of course it is available, it just can't find it for some reason. As a test, I specified that JavaTester.org should use 6u45 also and it works fine with no issues. But when I try to use the same configuration (7u67 and 6u45) against the Oracle application it fails every time. If I downgrade to 7u60, it works. 7u65 or higher, it breaks. The Oracle application hasn't changed so it must be something different in how 7u65+ is handling Deployment Rule Sets or pathing or something. I'm at a complete loss. ruleset.xml: <?xml version="1.0"?> -<ruleset version="1.0+"> -<rule> <id location="*.mycorp.com"/> <action version="1.6.0_45" permission="run"/> </rule> -<rule> <id location="http://javatester.org"/> <action version="1.6.0_45" permission="run"/> </rule> </ruleset>

  Read the article

• How is it possible to list all folders that a particular user/group has permissions on?

  - by Lord Torgamus

  Is it possible to list all folders/files that a given group has explicit permissions on, for a machine running Windows Server 2003? If so, how? It would be nice to see inherited permissions as well, but I could do with just explicit permissions. A little background: I'm trying to update groups/permissions on a test server. One of the groups, Devs, wasn't implemented correctly when it was created, and my goal is to remove it from the system. It has been replaced by LeadDevelopers, which has permissions on many — but naturally not all — of the same folders. I want to make sure that I don't accidentally orphan any folders or cause any other issues when I remove Devs. It did have some admin-level permissions. EDIT: The answers so far — at least *cacls and AccessEnum — provide a way to find out which groups/users have permissions on known directories/files. I actually want the reverse of this behavior: I know the group, and I'm looking for the directories/files for which the group has permissions. Also, as I noted in a comment, the Devs group is not itself a member of any other group.

  Read the article

• Hosting options for data-enabled web application

  - by Hertfordian

  I am independently developing an asp.net business application with a MySQL database. I currently have a Windows web hosting account which includes MySQL and MS SQL as installed supported options. I am not yet finally committed to using MySQL and I want to keep my options open to evaluate MS SQL and possibly other options such as PostGreSQL later when more of the business logic is in place - my data access layer will handle the database connectivity. The web hosting setup I have now is fine for development purposes, but if in future I want to use, say, PostGreSQL Server, and a level of usage of, say, 10,000 hits per day concentrated in business hours, I'm assuming I'll need a dedicated server. But in that case, should I just install PostGreSQL on the dedicated server, or is best practice to have a separate database server - perhaps locked down so that it can only be accessed through the web server? And supposing it was only 2000 hits a day - how would that change things? I'd appreciate it if anyone could point me in the direction of a useful guide to these sorts of issues. Naturally if I start paying for separate servers, I would like to know exactly why I'm doing it and what the performance issues and thresholds are.

  Read the article

• 5 year old server upgrade

  - by rizzo0917

  I am looking to upgrade a server for a web app. Currently the application is running very sluggish. We've made some adjustments to mysql (that's another issue in itself) and made some adjustments so that heaviest quires get run on a copy of the database on another server was have as a backup, however this will not last that much longer and we are looking to upgrade. Currently the servers CPUs are (4) Intel(R) XEON(TM) CPU 2.00GHz, with 1 gig of ram. The database is 442.5 MiB, with about 1,743,808 records. There are two parts of the program, the one, side a, inserts and updates most of the data. Side b, reads the data and does some minor updates. Currently our biggest day for side a are 800 users (of 40,000 users all year) imputing the system. And our Side b is currently unknown, however we have a total of 1000 clients. The system is most likely going to cap out at 5000 side b clients, with about a year 300,000 side a users. The current database is 5 years old, so we can most likely expect the database to grow pretty rapidly, possibly double each year (which we can most likely archive older records if it comes to that). So with that being said, should we get a server for each side of the app, side a being the master, side b being the slave, any updates made on side b are router to side a. So the question is should i get 2 of these or 1. 2 x Intel Nehalem Xeon E5520 2.26Ghz (8 Cores) 12GB DDRIII Memory 500GB SATAII HDD 100Mbps Port Speed And Naturally I would need to have a redundant backup so it could potentially be 4 of them.

  Read the article

• How to allow my Asp.net MVC 3 web app using MathJax to accept user input $x<y>z$ ?

  - by Recycle Bin

  I am developing a mathematics site using Asp.Net MVC 3 + Razor + MathJax. MathJax is a javascript library to render TeX or LaTeX codes on the web browser. And TeX or LaTeX codes represent mathematics contents such as an inline math $y=mx+c$ and a displayed math \[y=mx+c\]. Right now my site can accept input, for example, $x<y$. However it cannot accept $x<y>z$ because the framework regards this input is vulnerable to XSS and XSRF. Shortly speaking, what I should do to accomplish what I want but it does not open security vulnerability.

  Read the article

• Text to MP3 using System.Speech.Synthesis.SpeechSynthesizer

  - by Rob

  I am trying to get a text-to-speech to save to an MP3. Currently I have the System.Speech.Synthesis speaking to a WAV file nicely. With New System.Speech.Synthesis.SpeechSynthesizer '.SetOutputToWaveFile(pOutputPath) This works fine .SetOutputToWaveStream(<<Problem bit>>) .Speak(pTextToSpeak) .SetOutputToNull() .Dispose() End With Now the first line commented out produces a WAV file which is nice. Currently I am trying to replace that with an MP3 output stream and not having much success. I have tried the Yeti.MMedia converter but either it isn't going to work or I haven't got it to work successfully. I have to admit here I don't know much about encodings, speeds etc. So the question I have is, does anyone know of a nice way I can say something like the following: .SetOutputToWaveStream(New MP3WriteStream(pOutputPath)) and have the SpeechSynthesizer write to the WAV which then gets converted to the MP3 and ends up on the HDD.

  Read the article

• C# Speech Recognition

  - by fonix232

  I am making a Smart House Control System right now, and I have a little problem. I was thinking on using Cosmos for a base system, and adding the needed namespace libraries to it, but as the usual System.Speech.Recognition namespace depends too much on Windows Speech API, I have to forget about using it. So my question is, is there any (free if possible) voice recognition and/or speech speech synthesizer library for C#, what has the following: support for multi-language speaking extracting text content from speech sample synthesizing speech with selectable (or user-written) speech pattern (voice) A general usage, non-windows dependent library would be the best, and of course, if it was free too.

  Read the article

• Database per application VS One big database for all applications

  - by Jorge Vargas

  Hello, I'm designing a few applications that will share 2 or 3 database tables and all of the other tables will be independent of each app. The shared databases contain mostly user information, and there might occur the case where other tables need to be shared, but that's my instinct speaking. I'm leaning over the one database for all applications solution because I want to have referential integrity, and I won't have to keep the same information up to date in each of the databases, but I'm probably going to end with a database of 100+ tables where only groups of ten tables will have related information. The database per application approach helps me keep everything more organized, but I don't know a way to keep the related tables in all databases up to date. So, the basic question is: which of both approaches do you recommend? Thanks, Jorge Vargas.

  Read the article

• Java Concurrency: CAS vs Locking

  - by Hugo Walker

  Im currently reading the Book Java Concurrency in Practice. In the Chapter 15 they are speaking about the Nonblocking algorithms and the compare-and-swap (CAS) Method. It is written that the CAS perform much better than the Locking Methods. I want to ask the people which already worked with both of this concepts and would like to hear when you are preferring which of these concept? Is it really so much faster? Personally for me the usage of Locks is much clearer and easier to understand and maybe even better to maintain. (Please correct me if I am wrong). Should we really focus creating our concurrent code related on CAS than Locks to get a better performance boost or is sustainability a higher thing? I know there is maybe not a strict rule, when to use what. But I just would like to hear some opinions, experiences with the new concept of CAS.

  Read the article

• Why are getters prefixed with the word "get"?

  - by Joey

  Generally speaking, creating a fluid API is something that makes all programmers happy; Both for the creators who write the interface, and the consumers who program against it. Looking beyond conventions, why is it that we prefix all our getters with the word "get". Omitting it usually results in a more fluid, easy to read set of instructions, which ultimately leads to happiness (however small or passive). Consider this very simple example. (pseudo code) Conventional: person = new Person("Joey") person.getName().toLower().print() Alternative: person = new Person("Joey") person.name().toLower().print() Of course this only applies to languages where getters/setters are the norm, but is not directed at any specific language. Were these conventions developed around technical limitations (disambiguation), or simply through the pursuit of a more explicit, intentional feeling type of interface, or perhaps this is just a case of trickle a down norm. What are your thoughts? And how would simple changes to these conventions impact your happiness / daily attitudes towards your craft (however minimal). Thanks.

  Read the article

• Why Do Browsers Leak Memory?

  - by Dane Balia

  A colleague and I were speaking about browsers (using browser control in a project), and it appears as plain as day that all browsers (Firefox, Chrome, IE, Opera) display the same characteristic or side-effect from their usage and that being 'Leaking Memory'. Can someone explain why that is the case? Surely as with any form of code, there should be proper garbage collection? PS. I've read about some defensive patterns on why this can happen from a developer's perspective. I am aware of an article Crockford wrote on IE; but why is the problem symptomatic of every browser? Thanks

  Read the article

• Firefox session cookies

  - by meandmycode

  Generally speaking, when given a cookie that has no expiration period, modern browsers will consider this cookie to be a 'session cookie', they will remove the cookie at the end of the browsing session (generally when the browser instance closes). IE, Opera, Safari and Chrome all support this behavior. However firefox (3.0.9 latest proper release) appears not to follow this rule, from what I can tell it doesn't expire the cookies when the browser is closed, or when the user logs off or restarts the OS.. So, why does firefox refer to these as session cookies, when they last aparently indefinitely? Does anyone know how Firefox handles session cookie expiration?

  Read the article

• ssl_error_rx_record_too_long and Apache SSL

  - by Subimage

  I've got a customer trying to access one of my sites, and they keep getting this error ssl_error_rx_record_too_long They're getting this error on all browsers, all platforms. I can't reproduce the problem at all. My server and myself are located in the USA, the customer is located in India. I googled on the problem, and the main source seems to be that the SSL port is speaking in HTTP. I checked my server, and this is not happening. I tried the solution mentioned here, but the customer has stated it did not fix the issue. Can anyone tell me how I can fix this, or how I can reproduce this??? PS: If you can reproduce the problem with the following URL please let me know! THE SOLUTION Turns out the customer had a misconfigured local proxy! Hope that helps anyone finding this question trying to debug it in the future.

  Read the article

• Hiding flash component scrollbars using object/param syntax

  - by Kieran Benton

  Hi all, I'm not sure if this is possible (complete non-flash developer speaking), but we have a 3rd party component that we want to only show a certain topleft hand portion of. I've tried limiting the size of the HTML object container as: <object type="application/x-shockwave-flash" width="600" height="415" data="<url>"> <param name="movie" value="<url>" /> <param name="wmode" value="transparent" /> <param name="allowscriptaccess" value="always" /> <param name="quality" value="high" /> <param name="flashvars" value="<vars>" /> </object> So limiting it to 600x415, but this causes horizontal and vertical scrollbars as part of the flash component to appear. Is there any standard way to override this behaviour? Thanks.

  Read the article

• Language of variable names? (native foreign language speakers)

  - by Jj

  We are a spanish speaking development team, we code in django and we all are pretty fluent in english, as all documentation, sample code, APIs, etc come in english. On our last project we chose to name all the variables, class names, modules, files and such in english, even though the whole application was in spanish, we kept a strings file where all our spanish was stored. We did this because it seemed more natural to read the whole code in one language, since keywords, constructs and dependencies have names in english. On new projects we are starting, we are having second thoughts about other teams mantaining our code or just having 3rd parties having to deal with templates or context in spanish. Do you know of any best practice on this matter?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >