Search Results

Search found 5716 results on 229 pages for 'dual channel'.

Page 48/229 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

  • Dual Nic, one keeps dropping

    - by user1215018
    I'm running windows server 2008 r2 on a dell poweredge 2850. I have 2 NICs, one is configured behind a firewall with a dhcp server on the main local LAN and another one has it's own dedicated connection to one of our 13 static IPs. So in a nutshell we have 2 of our static IPs going to this server, one indirectly through a firewall/dhcp server, and the other directly. I am trying to reach IIS on port 80 and port 443. The problem is that the NIC with the direct connection (NIC2) keeps dropping and says either "No internet connection" or "Unauthenticated". However, the NIC behind the firewall (NIC1) has no problems at all. Update: This is the second time this has happened in 3 days and each time the fix has been enabling the dhcp client on the NIC, allowing it to error out to a 169.x.x.x address, then re-enabling the nic with it's static IP assignment.

    Read the article

  • Dual NIC internet access

    - by JavaRocky
    Q1. If a computer had two NICs, lets say windows, on which interface would HTTP traffic (or any for that matter) go out on. Not sure how the routes table would look like. Q2. If one of the NICs link becomes unresponsive, would traffic be automatically routed to the other NIC? Thanks.

    Read the article

  • Connectivity issues with dual NIC machine in EC2

    - by Matt Sieker
    I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

    Read the article

  • HP DL360 G6 NC328i Dual Port Gigabit - Windows Server 2003 R2 Driver Problem

    - by brianjd
    I recently installed Windows Server 2003 R2 (64) on a DL360 G6 without using the SmartStart CD (it didn't like the MSDN media). But when I attempted to install the network drivers post-install using the packages from the HP website, I wasn't successful. Though I selected the correct package, the installer reported I did not have the necessary hardware configuration. Has anyone had a similar experience? Thanks

    Read the article

  • Dual VGA monitors with Quadro FX 580?

    - by dentrasi
    I have a machine with a Quadro FX 580 card (DVI and two Displayport). Attached to it are two 19" Acer screens, which are both (annoyingly) VGA. The first one works perfectly, with a DVI-VGA adaptor. The second one doesn't work. It's got a VGA cable, which goes into a VGA-DVI converted, which then goes into a DVI-Displayport converter. Initally, I was getting 'Cable Unplugged' on the screen, and it couldn't be seen by Windows or the nVidia control panel. After swapping the VGA-DVI adaptor (which works perfectly on another machine), Windows can now see the monitor. The nVidia panel sees the model and native resolution, but I get a constant 'No Signal' error. Switching to the other Displayport makes no difference. I suspect that the card is seeing a DVI connection plugged into it (nVididaCP shows the monitor as having a DVI connection), and it only sending out a digital signal because of this. Does anyone know of a solution (other than trying to get a Displayport-VGA adaptor), or of a way to force the card to see it as VGA? Thanks, ~Dentrasi

    Read the article

  • multi boot: xp + xp + xubuntu, how to?

    - by Jassano
    My laptop (with a single harddrive) currently has xp + xubuntu dual boot. I want to make that triple boot: xp + xp + xubuntu Please don't ask why, take it as given. How can I accomplish this triple boot? I tried using gparted to add a partition (worked!), used dd to clone the xp install to the new partition (worked!), edited grub (my bootloader) to list a third entry pointing to the correct device (worked!). But regardless of which of the two xp entries in grub I select I still get booted into one and the same XP. The files for the other XP show up under D: so I know they're there alright. I have edited the boot.ini on the new partition so everything looks to be in order. What do I need to do to change that and make both xp instances bootable in this scenario?

    Read the article

  • Dual booting windows 8.1 and ubuntu

    - by Sriniketh
    I have a lenovo laptop with windows 8.1. I wanted to use ubuntu alongside windows. Hence, i downloaded the ubuntu 14.04 iso and created a live pendrive using Universal USB installer. I disabled secure boot and booted from the pendrive. All i get is the GNU GRUB command line version 2.X. I don't get a GUI for the GRUB and i don't know how to boot into ubuntu from the command line. I searched quite a few online forums but in vain. Can someone tell me how to proceed? Thanks in advance.

    Read the article

  • Macbook Pro Multiple Monitor Problem

    - by thinksocrates
    I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

    Read the article

  • Failed to bring up eth1 in a dual ips solution in ubuntu

    - by lxyu
    I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

    Read the article

  • Stop chkdsk when Windows 7 on one drive and Windows 8 on another

    - by markmnl
    I installed Windows 8 (retail) on a new drive with my Windows 7 drive unplugged. So each Windows has no idea about the other one and I use the BIOS boot options to select which drive hence OS to boot into. Now whenever I boot into Windows 8 then boot into Windows 7, Windows 7 runs chkdisk presumably because Windows 8 messed with it. Is there anyway to stop this? (In hindsight I should have installed Windows 8 with Windows 7 drive plugged in so I could use the Windows dual boot options).

    Read the article

  • Possible to restore Windows Partition disk image?

    - by kd7iwp
    I have a machine that was dual-booting Windows 7 and Ubuntu 12.04. I used the Disks program in Ubuntu to make a disk image of my windows partition which I saved on an external disk. I then reformatted the main drive and installed Ubuntu 12.10. I created a spare partition and restored that Windows disk image to that partition. Is it possible to boot Windows? I have run boot-repair and Grub now gives me both Ubuntu and Windows options but when I select Windows I get only a black screen with blinking cursor. I ran a Windows recovery disk and ran startup repair but still no luck. I also tried running lilo inside Ubuntu but still can't boot Windows. Any other ideas? PS, I'm on a Netbook with no DVD drive so I can't just reinstall Windows though if that is my only option I can borrow a DVD eventually.

    Read the article

  • Does my motherboard support dual-core processors?

    - by Filip
    Hi there! I'm very confused about my motherboard (ConRoe945PL-GLAN) It's manual says, that i can use only some kind of ConRoe processors. But some pages on internet says that i can plug in almost everything. For ex.: aria.co.uk says that i can plug in even Core 2 Duo. It would be awesome if i would not have to buy new motherboard! Anyway, if my motherboard will not let me to plug in Core 2 Duo, should i buy Pentium 4 (very cheap) with 3,2 GHz and insanely overclock it to have some performance or buy new motherboard + new processor for big money? THX for any answers! =)

    Read the article

  • Getting "GRUB loading ... no such partition"?

    - by shameedp
    I am having a dual os, windows 7 and linux, the c drive have 20 GB, in which 5 GB is allocated for windows 7 (original) and 15 gb for linux since the spacing for windows is very low i used EaseUS partition manager and deleted my linux OS, and merged the unused space into my C drive, now it becomes 20GB, the things, after the reboot, I am getting GRUB loading. Welcome to GRUB! error: no such partition. entering rescue mode. . . Kindly help me guys the problem i am facing is i dont have a DVD drive to resolve it, using recovery mode. Waiting for your reply guys. in ls command i have (hd0) (hd0,msdos8) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1)

    Read the article

  • Issues printing through ssh tunnel and port forwarding

    - by simogasp
    I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

    Read the article

  • Can I get dual monitor support (2xDVI) from my (DVI+HDMI) graphics card?

    - by nray
    It seems that pure 2 x DVI dual head video cards are becoming rare. Most cards feature something like 1 x DVI plus 1 x HDMI plus 1 x VGA or some other interface. The idea seems to be that you can just use an HDMI <= DVI adapter. One result is that cards are seldom marked " 2 x DVI " anymore, but does this mean that they support simultaneous output on all interfaces? Are all cards dual head these days? Take Asus's nVidia cards for example, they routinely have 1 x DVI plus 1 x HDMI instead of 2 x DVI, so my question is, are these equivalent to a dual head DVI card, or is there some detail required for dual monitor support? I use dual-monitor stretched desktops for digital signage projects.

    Read the article

  • Invalid BOOT.INI (dual boot XP with 7)

    - by Muxa
    I had Windows XP x64 as my main system, and i also had a second partition with Windows XP x64. Both booted from first partition (C:) I then installed Windows 7 Ultimate on the first partition. I've added NTLDR using BCDRDIT. I've also copied NTLDR, NTDETECT.COM and BOOT.INI onto the drive where XP remained. However then i try to boot into Windows XP x64 i get Invalid BOOT.INI file Booting from c:\windows\ NTDETECT failed I found instructions on how to fix it using a boot disk, however the partitions are on a software RAID. I've tried to boot from a customized XP CD with the drivers, however it does not offer me a Repair option for some reason - just setup. Partitions that i have:'= System Reserved Main (Windows 7) Secondary (Windows XP x64) Here's the contents of my BOOT.INI: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Windows XP Professional x64 Edition" /fastdetect

    Read the article

  • Windows XP dual screen problems, user account related

    - by Chris
    I have had this issue with a few laptops now and it looks like it is some sort of user account problem. Specifics of the system are: Dell Laptop Windows XP Pro SP3 Non-domain member computer DLP Projector connected to laptop via VGA I use this setup almost daily to do presentations, always the mirrored display mode where I can see on the laptop monitor the same thing that is displayed on the projector. Today, when I boot up, I get the mirrored display at the login screen, but after I log in, it switches to Extended Desktop (like two desktops side-by-side). Fn+F8 just cycles through all the normal settings except the mirrored display. I created a new user account on the computer and it performs normally. Mirrored display works as normal. I have run into this about 4 times now and it always can be solved by creating a new user account on the computer, and then all is well. I would like to either: 1. Find a way to reset the customized settings for a specific user account which would hopefully make this go away, or 2. Find the specific setting that causes this so that I can easily fix it when the problem comes up. Creating new user accounts is kind of a pain and a easy fix must be out there somewhere.

    Read the article

  • Is dual boot via wake on lan possible?

    - by ianfuture
    Is it possible to set up a PC so it can Wake on Lan and then have the option of which OS to boot into? I want to have a secondary PC with Windows and a *nix variant installed. I want the PC to be in a remote room so I can connect via a wireless hub to it and then boot it up as and when required and choose which OS to boot into. If it is possible how would I go about it? Any recommendations on how to do it or where I can get more info on how to do it? Thanks.. Ian

    Read the article

  • Dual Use (Mice and Keyboayd) of Windows 7

    - by jmalais
    I saw some answers to this question however they were fairly old (at least 2 years) and primarily for Vista or previous Windows OS versions. My question is this: Is there a program that allows a single Windows 7 computer to have multiple users (2 needed) and allow for two mice and two keyboards on two screens. What I'm trying to achieve: I'd like for the ability to play a game on one monitor while another person surfs the web, uses a program, or possibly play a different game. Any ideas?

    Read the article

  • XPP-32 over W7-64 on music production laptop

    - by quarlo
    I need to upgrade my laptop and need high performance for music production (recording and mixing). My audio interface manufacturer seems to be unable to successfully convert their drivers to 64-bit. I do not trust a virtual machine to handle real-time audio recording at low enough latency so ... I would like to install XP Pro 32-bit on a separate partition and dual boot since most of the machines that can handle this application now ship with Windows 7 64-bit flavors. I'd like to transit to 64-bit over time assuming M-Audio does eventually get a handle on 64-bit drivers, but really need to ensure that I can stay at 32-bit for now. Does anyone have any experience with this or something similar?

    Read the article

  • Using gnu screen with dual monitors.

    - by Seamus
    I use GNU screen for all of the work I do in the terminal, and would like to find a way to use it across two screens, but have not found anything that is satisfactory. I use cygwin or putty to access the system that runs screen, most of the time. Thanks in advance.

    Read the article

  • Windows 8 dual monitor wallpaper slideshow

    - by Aierou
    There have been a number of improvements with multi-monitor compatibility in Windows 8, but how would one go about configuring wallpaper slideshow settings for a second monitor? For instance: I want to display one album on my second monitor, and another on my main monitor. How would I set this up? Also, is there a way to make the slideshow display the same image on each monitor, rather than it displaying two different images from the same slideshow?

    Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >