Search Results

Search found 1733 results on 70 pages for 'isc dhcp'.

Page 48/70 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Cannot connect to network

  - by dany

  I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 192.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

  Read the article

• how to set static IP address in opensolaris

  - by pm100

  in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

  Read the article

• Help me to set samba and apache on my Ubuntu VM from Vista, starting from ping

  - by avastreg

  Ok the title is not so clear after all, so let's start with the problem description posting some points: i'm on Win Vista i have a Virtual Box Ubuntu 9.04 server (Virtual Machine) installed in windows i'm under Active Directory (maybe helps), with network 192.168.2.x After Ubuntu installation (LAMP), i have: Ubuntu Ip set to 10.0.2.15 (dhcp) Vista pings Ubuntu and Ubuntu pings Vista (only IPs, not names) Can't connect to Apache (default install ubuntu server) at the url h**p://10.0.2.15/ On Ubuntu, testing Apache by doing 'wget http://10.0.2.15/' works Tried to setup samba, writing a share def, but nothing, i can't access from Vista to Ubuntu My scope is: Setting up samba to work on files from windows Reaching apache to test web pages Ok i'm not completely noob (but i'm on the noob way anyway) and i've tried many solutions, so please try to help me; let's look together what went wrong :)

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Setting up a Time Capsule with port forwarding

  - by Kaji

  Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

  Read the article

• Configuring subdomains for a machine (Win2k8) in a lan

  - by RMS

  I am currently setting up a windows 2008 server to host a website with multiple subdomains, all accessible only within the lan. also, there is no active directory. what I did is : 1 - computer name : 'web' 2 - in IIS, I added a site binding as 'site1.web' to the default web site 3 - added DNS role to the server 4 - added 'web' as principal zone in direct lookup zones (default options) 5 - added CNAME 'site1' From a client machine, in tcpip config I added the ip address of 'web' to the DNS list in addition to the ISP DNS. (client machine ip is from DHCP) Now browsing to 'http://web' or 'http://site1.web' works correctly. My question is, is it possible throught additional steps in the server to have the websites accessible without requiring the DNS config in all the client machines ? thanks in advance

  Read the article

• Process of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other than carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We don't need a leased line as there are less than ten employees.

  Read the article

• Set up Windows SBS dns server and vpn clients from brench office

  - by mn

  I have got some clients from bench office which connects vpn to main office. The Router from bench office assigned addresses from DHCP 192.168.1.0/255.255.255.0 and remote gateway assigned vpn ip addresses 10.10.20.0/255.255.255.0. There is a DNS server (Active Directory Win SBS 2000) and vpn client are registered with vpn address (10.10.20.0/255.255.255.0 and domain company.com.pl). I would like to register also primary bench subnet 192.168.1.0/255.255.255.0 with domain for example company.vpn.local I want to access vpn hosts for example: dev3.copmany.pkb.local and dev3.company.com using my Win SBS 2000 DNS server.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - Setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. My ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Route an IP from WAN to a host on LAN on OpenWRT

  - by Zsub

  EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have recieved a /29 from our ISP. The first address is reserved for their endpoint, so I'm free to use five addresses. We run a local network, so of course there is a router in between running OpenWRT to provide all hosts with (W)LAN (dhcp from a private range). However, we also have a server running OS X Server 10.6 (Snow Leopard) and I'd like that server to be accessible both from the LAN using a private IP as well as from the WAN on it's own public IP. Point of note is that the server only has one network port, so multiple NICs is not an option, unfortunately. How would I go about doing this?

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Host a subdomain from an IIS7 server on another server

  - by brennanmur

  I am running a network with two server, one running SBS 2008 which hosts a majority of the network services (DNS, DHCP, Exchange, IIS, DC, AD...), including the primary webpage at mydomain.com. The other server is a linux box running an apache web server. I'm trying to set the apache server to host the site site2.mydomain.com. I have changed the DNS settings on the first server so that site2.mydomain.com can be accessed from the internal network, but I cannot access site2.mydomain.com from the internet. I have tried using server farms and application request routing cache, as described on this page, http://forums.iis.net/t/1156458.aspx, but I still can't access site2.mydomain.com from the internet. I don't have much experience with web servers, I usually just administer local networks, so I'm not sure if I'm going about this the right way. Any help or suggestions would be much appreciated.

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• Accessing Windows from Linux/Mac by name using TCP/IP

  - by stevekuo

  What are some solutions to access Windows by its computer name from Linux and Mac using TCP/IP. That is, from terminal I want to be able to ping my Windows PCs using its host name. My setup is: Various machines running Ubuntu, Windows XP and OS X. Networked using a consumer grade wireless router which provides DHCP. The only DNS is the ISP's, which resolves Internet names and not local host names. The Windows machines can ping each other by name. The Ubuntu and OS X machines can only ping Windows by IP address (name doesn't work).

  Read the article

• Security tips for adding wireless AP to domain network?

  - by Cy

  I am researching best-practices for adding wireless to our existing domain network. My DHCP server is running Windows Server 03 Standard (not sure if thats useful). I am familiar with simple home networking but I thought I'd get some expert advice for the more advanced stuff. Any tips and / or best-practices? Is this Cisco Wireless Access Point a good option? Are there any additional hardware recommendations? Thank you in advance for your help.

  Read the article

• Bridging wireless and wired networks on Linux box

  - by nixnotwin

  I have the following setup: modem + router - - - - -Ubuntu box on master mode.........wireless devises. Ubuntu machine connects to Internet on wired network. I've dhcp3-server, masquerading, and wireless card with master mode on Ubuntu box. The issue is Ubuntu connects to the router on NAT. The wireless devises connect to the Ubuntu box on a NAT too (though different). SO my wireless devises are behind two NAT networks. The solution I am looking for is Ubuntu should forward dhcp requests to the modem+router, and Ubuntu should act as a switch or a bridge that allows wireless devises to connect to the wired network. So the modem+router should act a main router.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Make 2 virtual machines ping in virtual box

  - by darkheir

  I'm trying to make 2 virtual machines communicate in Virtual Box, but whitout any success. Here are the step I have done: I setted both VMs in Internal networking mode (using VBoxManage modifyvm "VM name" --nic<x> intnet) I setted the DHCP server that is built into VirtualBox to manage IP addresses :VBoxManage dhcpserver add --netname intnet --ip 10.13.13.100 --netmask 255.255.255.0 --lowerip 10.13.13.101 --upperip 10.13.13.254 --enable But then both of the VM have the same IP Adresse (10.13.13.101) and even if set the IP manually, the Virtual Machines are not pinging each other.

  Read the article

• Configure ubuntu 12.10 to share internet through second NIC with subnetwork

  - by Dan Smith

  I have an Ubuntu 12.10 box with 2 NICs. eth0 is connected to my 192.168.1.X network, which is connected to my home router and out to the internet. I want the other interface, eth1,to support 10.0.0.x and allow devices on that network to access the internet through my ubuntu box. I do not need dhcp on the 10.0.0.x network. Here's a schematic: Internet --- home router ---- ubuntu[eth0:192.168.1.x, eth1:10.0.0.x] --- [10.0.0.x device] How do I configure the ubuntu box to share the internet with devices on that subnetwork? Thanks!

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• Mac OS X 10.6.5 and link-local addresses (169.254.x.x)

  - by WMR

  Starting with the latest update of Mac OS X (10.6.5) all Apple applications (Safari, Mail, iChat, etc.) don't connect to the internet anymore, if the assigned IP address is from the 169.254.0.0./16 range. This is not a routing problem, I can still ping any server I want, even connecting via command line tools works. I know this problem could easily be fixed by changing the IP address to a more common RFC1918 address (e.g. 192.168.0.0./16), but this is what the ISP assigns via DHCP and I am not sure I can convince them (Xplornet) to change that. So I am wondering if there's a (hidden?) setting that would convince Apple applications, that they are in fact still online.

  Read the article

• PowerShell Remoting: No credentials are available in the security package

  - by TheSciz

  I'm trying to use the following script: $password = ConvertTo-SecureString "xxxx" -AsPlainText -Force $cred = New-Object System.Management.Automation.PSCredential("domain\Administrator", $password) $session = New-PSSession 192.168.xxx.xxx -Credential $cred Invoke-Command -Session $session -ScriptBlock { New-Cluster -Name "ClusterTest" -Node HOSTNAME } To remotely create a cluster (it's for testing purposes) on a Windows Server 2012 VM. I'm getting the following error: An error occurred while performing the operation. An error occurred while creating the cluster 'ClusterTest'. An error occurred creating cluster 'ClusterTest'. No credentials are available in the security package + CategoryInfo : NotSpecified: (:) [New-Cluster], ClusterCmdletException + FullyQualifiedErrorId : New-Cluster,Microsoft.FailoverClusters.PowerShell.NewClusterCommand All of my other remote commands (installing/making changes to DNS, DHCP, NPAS, GP, etc) work without an issue. Why is this one any different? The only difference is in the -ScriptBlock tag. Help!

  Read the article

• Problems connecting Centos on VMware to the network using bridged connection.

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >