Search Results

Search found 1733 results on 70 pages for 'isc dhcp'.

Page 47/70 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Problems connecting Centos to the network when running in VMWare

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. I tried to configure VMWare to use a bridged connection as well as NAT connection. An image of Ubuntu runs fine on the same VMware. What am I missing here? Thanks.

  Read the article

• gigabit network with adsl modem

  - by user51006

  Hi, i would like to build a gigabit network to connect the different computers at my home. I already have an 100Mb adsl router/modem but i have an hard time to find a 1000Mb one, so i came up with the idea of using a normal 1000Mb router or switch to put between the adsl modem and the computers. So i only use the adsl modem to connect to the internet and the gigabit router as dhcp to connect the different computers. But to get to the question. Will the 100Mb adsl router slow down my network? Will data travel like pc gigabit router computer or pc gigabit router adsl router gigabit router pc. My gut says it will go like in the first option but i have seen network hardware do some weird stuff. What do you think?

  Read the article

• Setting up a router as a DNS server only

  - by Jacob R

  I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

  Read the article

• How to configure 2nd network card for use in VMWare Workstation?

  - by Timo

  Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

  Read the article

• Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

  - by Victor Sergienko

  I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

  Read the article

• Vista laptop won't connect to airport extreme

  - by Hutch

  Our previous router died, and to replace it I procured an apple airport extreme. My mac, my wrt54gs (with ddwrt acting as a bridge) and a linux machine have had no problem connecting to the wireless. None of the wired clients are having a problem obviously. The problem is one of my roommates can not connect. That's not strictly true. He can connect to the network, and will, infact, get a dhcp lease. However he cannot get any packets out. Can't ping the router, can't access any web sites, nothing. However he's fine if we switch to an unsecured network. Which is obviously not acceptable. The airport only allows for 'wpa/wpa2 personal' and 'wpa2 personal' (and of course the enterprise versions there of) I keep reading about this problem in multiple spots on the web, but never see any actual answers... Anyway the laptop: hp/compaq cq50-215nr vista home premium wireess card: atheros 5007 airport is simultaneos dualband II

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• Windows 7 - Virtualbox host only adapter doesn't get an IP

  - by Craig

  When I create a new host only network adapter, it will not set the IP address I assign to it. After I save the IP address & netmask it looks like it works (I see the Windows 7 User Account Control verification box), but the IP address doesn't get stored on the adapter. I have tried adding/removing the adapter from within virtualbox and settings the values manually in the Windows aapter settings dialogue. I am using a Windows 7 host. Does anyone know why the settings don't get saved, or how to get more information? C:\Program Files\Oracle\VirtualBox>VBoxManage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: 1721835e-e2c8-4f52-90fe-df7227ebe037 DHCP: Disabled IPAddress: 0.0.0.0 NetworkMask: 0.0.0.0 IPV6Address: IPV6NetworkMaskPrefixLength: 0 HardwareAddress: 00:00:00:00:00:00 MediumType: Unknown Status: Unknown VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter

  Read the article

• cannot access my own computer through My Network Places

  - by vgv8

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• MBP Bluetooth PAN connection with iPhone 4

  - by Chetan Sachdev

  I am trying to share MBP(OSX 10.8.3) internet connection with iPhone 4 (iOS 6) using Bluetooth PAN(Personal Area Network). Problem is Bluetooth PAN is not getting an ip address. I have tried to renew DHCP lease but nothing works. When I give a Manual IP address, the Bluetooth PAN goes green but doesn't shows the connection in iPhone. Is it possible to share the internet connection via Bluetooth. Note: I don't want to create an Ad-hoc connection over wifi.

  Read the article

• Netboot Intel Macs without BSDP

  - by notpeter

  I have a netboot setup with DeployStudio that works great in my lab, but doesn't work on our main network. After some digging, I believe it's because our network admins are filtering BSDP (Boot Service Discovery Protocol) on our subnet at the switch level. Is it possible to hard code which server my clients (early 2007 iMac Core2Duos) should boot from without relying on BSDP? Perhaps relevant details: I do not have control over switch configs or DHCP settings. Client and server are running 10.6 Snow Leopard. The clients see the netboot server advertising itself in the 'Startup Disk' system preferences pane, but when I go to netboot it just leaves me with a flashing globe.

  Read the article

• Virus blocking incoming connections ?

  - by Benoît

  Hello, on my windows 2003 server, all incoming connections are dropped. I can see them getting in using Wireshark, but even a single ping from another computer fails. All locally initiated connection work fine (i'm asking from the server). This server is the DC/DHCP/DNS/File server, so computer clients are in the dark. I've run varius antivirus and removal tools without any luck. The Windows Firewall is disabled. I'm wild-guessing at some virus/worm. How can i check why these incoming ICMP/TCP SYN/etc are dropped ? Anyone has any knowledge about such situations ? Thanks.

  Read the article

• D-Link DNS-323 NAS firmware update

  - by Mark Beaton

  Hi all, I've got a D-Link DNS-323 NAS enclosure holding a bunch of multimedia files that I've (possibly stupidly) just updated the firmware on, from 1.03 to 1.08. The updater indicated it applied the firmware patch successfully, but after rebooting it I can no longer get into it via the web interface, either via the static IP I had assigned it before the update, or by any of the DHCP-assigned addresses that I can see are currently assigned by my router. The unit just sits there, with the drives (2x512 set up as RAID-1) thrashing away seemingly forever... So, my question - has anyone had a similar experience with one of these units? Any advice etc? I've googled the hell out of it, and can't find anything useful.

  Read the article

• Windows 7 Utlimate x64 - No Internet access

  - by rafek

  I've just installed Windows 7 Ultimate x64. As all of my computers at home I've connected to my router via wifi (open/wep). And what has happened is that Wireless Connection is Connected but with No Internet access -- my ipconfig says: Autoconfiguration IPv4 Address : 169.254.33.161 Subnet Mask : 255.255.0.0 Default Gatewawy : (empty) After ipconfig /renew I get: An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. [..] I'm looking for a solution for 2 hours now...

  Read the article

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• Virtualization deployment for datacenter

  - by bogha

  Hi, my company is going to deploy an IT Infrastructure on a virtual platform, can you please help me with the following: 1- which one do you recommend, Cisco Unified computing system ( cisco + emc + vmware )or HP Blades( virtualization solution + HP Storage )? 2- i Need to install a DNS Server, Web server, cpanel for managing hosting packages and Microsoft layer of product for usingg in the corporate infrastructur ( active directory, Local DNS, Exchange server, DHCP, Global catalog ) what is the minimum requirments for these servers ( in terms of CPU and Memory ) . 3- what is the best way to implement a redundant solution in a virtual environment. thank you

  Read the article

• Why is this static routing not working ?

  - by geeko

  Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

  Read the article

• Set up ad hoc wireless connection between Windows Vista and Mac OS X

  - by Skarab

  I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

  Read the article

• faking NAT with a VMware distributed switch across multiple hosts

  - by romant

  I need to construct a NAT for certain machines within the network. Wish to do this with dvSwitch - as it seems the logical way of attacking the problem as in this scenario there's just under 30 hosts. In order for the NAT'ed VM's to have access to the 'real' network. I am providing a 'router' VM, which will have access to the WAN/outside network, and also act as the DHCP server for the NAT'ed machines. Problem Space When the machines connected to the NAT interface and the router are on the same host, then they get an IP from the router VM, and work perfectly (routed outside). Unfortunately machines on other Hosts that are connected to the dvSwitch do not get an IP and further tcpdump shows no network data getting through across the hosts within the dvSwitch. Has anyone achieved a NAT solution using a dvSwitch before that they could share?! Thank you. EDIT: Including the diagram.

  Read the article

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• How to set up a wireless AP with a linux box and SOCKS proxy

  - by user50455

  I've got: (1) Linux box (Arch linux to be precise, but that doesn't really matter) (2) Ethernet connection on it (say, eth0) (3) Socks proxy on a remote site (say, remote :port), which can be accessed through (2) (4) Wireless card on local linux box (say, eth1) So, the task is: create a wireless access point using (4) on local site (1) in such a way that all connections from it will go through proxy (3). E.g., when one simply connects to that AP (well, there should be DHCP or something for that) and goes to serverfault.com, all the traffic goes through that SOCKS proxy. I'm just asking for the digging direction and some references, not step-by-step tutorial. Thanks in advance

  Read the article

• Domain Computers Not Listed In Network

  - by Giawa

  Our network computers are all connected to a domain, and I can see them if I search the active directory (I can click 'search active directory' and then select 'computers' and then Find Now, and all of the computers will appear). However, the computers are not listed in the network browser on any of our computers (Win XP, Win7, Linux, etc) which are connected to the domain. DC is running Windows Server 2008 (Windows Server Standard) with a configured DNS and DHCP server. All of the IPs on our local network are static IPs, although I can't see how that would make a difference. I can still connect to computers on the network via \\computer_name, but I cannot browse them in 'network' or in 'my network places'. The computer browser service is not started on the DC, but I tried starting that and it had no effect. DC currently has the firewall configured as 'off' to try to debug this problem. Thanks in advance

  Read the article

• Why is Internet access and Wi-Fi always so terrible at large tech conferences?

  - by Joel Spolsky

  Every tech conference I've ever been to, and I've been to a lot, has had absolutely abysmal Wi-Fi and Internet access. Sometimes it's the DHCP server running out of addresses. Sometimes the backhaul is clearly inadequate. Sometimes there's one router for a ballroom with 3000 people. But it's always SOMETHING. It never works. What are some of the best practices for conference organizers? What questions should they ask the conference venue or ISP to know, in advance, if the Wi-Fi is going to work? What are the most common causes of crappy Wi-Fi at conferences? Are they avoidable, or is Wi-Fi simply not an adequate technology for large conferences?

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >