Search Results

Search found 32116 results on 1285 pages for 'object object mapping'.

Page 48/1285 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Why don't Normal maps in tangent space have a single blue color?

  - by seahorse

  Normal maps are predominantly blue in color because the z component maps to Blue and since normals point out of the surface in the z direction we see Blue as the predominant component. If the above is true then why are normal maps just of one color i.e. blue and they should not be having any other shades(not even shades of blue) Since by definition tangent space is perpendicular to normal at any point we should have the normal always pointing in the Z (Blue direction) with no X(Red component) and Y(Green component). Thus the normal map(since it is a "normal map") should have had color of normals which is just the Blue(Z =Blue compoennt = 1, R=0, G=0) and the normal map should have been of only Blue color with no shades in between. But even then normal maps are not so, and they have gradients of shades in them, why is this so?

  Read the article

• How can I prevent seams from showing up on objects using lower mipmap levels?

  - by Shivan Dragon

  Disclaimer: kindly right click on the images and open them separately so that they're at full size, as there are fine details which don't show up otherwise. Thank you. I made a simple Blender model, it's a cylinder with the top cap removed: I've exported the UVs: Then imported them into Photoshop, and painted the inner area in yellow and the outer area in red. I made sure I cover well the UV lines: I then save the image and load it as texture on the model in Blender. Actually, I just reload it as the image where the UVs are exported, and change the viewport view mode to textured. When I look at the mesh up-close, there's yellow everywhere, everything seems fine: However, if I start zooming out, I start seeing red (literally and metaphorically) where the texture edges are: And the more I zoom, the more I see it: Same thing happends in Unity, though the effect seems less pronounced. Up close is fine and yellow: Zoom out and you see red at the seams: Now, obviously, for this simple example a workaround is to spread the yellow well outside the UV margins, and its fine from all distances. However this is an issue when you try making a complex texture that should tile seamlessly at the edges. In this situation I either make a few lines of pixels overlap (in which case it looks bad from upclose and ok from far away), or I leave them seamless and then I have those seams when seeing it from far away. So my question is, is there something I'm missing, or some extra thing I must do to have my texture look seamless from all distances?

  Read the article

• samplerCubeShadow and texture offset

  - by Irbis

  I use sampler2DShadow when accessing a single shadow map. I create PCF in this way: result += textureProjOffset(ShadowSampler, ShadowCoord, ivec2(-1,-1)); result += textureProjOffset(ShadowSampler, ShadowCoord, ivec2(-1,1)); result += textureProjOffset(ShadowSampler, ShadowCoord, ivec2(1,1)); result += textureProjOffset(ShadowSampler, ShadowCoord, ivec2(1,-1)); result = result * 0.25; For a cube map I use samplerCubeShadow: result = texture(ShadowCubeSampler, vec4(normalize(position), depth)); How to adopt above PCF when accessing a cube map ?

  Read the article

• OpenGL lighting with dynamic geometry

  - by Tank

  I'm currently thinking hard about how to implement lighting in my game. The geometry is quite dynamic (fixed 3D grid with custom geometry in each cell) and needs some light to get more depth and in general look nicer. A scene in my game always contains sunlight and local light sources like lamps (point lights). One can move underground, so sunlight must be able to illuminate as far as it can get. Here's a render of a typical situation: The lamp is positioned behind the wall to the top, and in the hollow cube there's a hole in the back, so that light can shine through. (I don't want soft shadows, this is just for illustration) While spending the whole day searching through Google, I stumbled on some keywords like deferred rendering, forward rendering, ambient occlusion, screen space ambient occlusion etc. Some articles/tutorials even refer to "normal shading", but to be honest I don't really have an idea to even do simple shading. OpenGL of course has a fixed lighting pipeline with 8 possible light sources. However they just illuminate all vertices without checking for occluding geometry. I'd be very thankful if someone could give me some pointers into the right direction. I don't need complete solutions or similar, just good sources with information understandable for someone with nearly no lighting experience (preferably with OpenGL).

  Read the article

• Exporting UV coords from Blender

  - by Soapy

  So I have searched on google and various other websites but I've not found an answer. The only ones I did find did not work. So my question is how do I get UV coords from blender (2.63)? Currently I'm writing my own custom file exporter, and so far have managed to export vertices and their normals. Is there a way to export the UV coords? N.B. I'm currently try to figure it out using a simple cube that is unwrapped and has a texture applied to it.

  Read the article

• Sampling Heightmap Edges for Normal map

  - by pl12

  I use a Sobel filter to generate normal maps from procedural height maps. The heightmaps are 258x258 pixels. I scale my texture coordinates like so: texCoord = (texCoord * (256/258)) + (1/258) Yet even with this I am left with the following problem: As you can see the edges of the normal map still proves to be problematic. Putting the texture wrap mode to "clamp" also proved no help. EDIT: The Sobel Filter function by sampling the 8 surrounding pixels around a given pixel so that a derivative can be calculated in order to find the "normal" of the given pixel. The texture coordinates are instanced once per quad (for the quadtree that makes up the world) and are created as follows (it is quite possible that the problem results from the way I scale and offset the texCoords as seen above): Java: for(int i = 0; i<vertices.length; i++){ Vector2f coord = new Vector2f((vertices[i].x)/(worldSize), (vertices[i].z)/( worldSize)); texCoords[i] = coord; } the quad used for input here rests on the X0Z plane. 'worldSize' is the diameter of the planet. No negative texCoords are seen as the quad used for input for this method is not centered around the origin. Is there something I am missing here? Thanks.

  Read the article

• Bad texture on model with different GPU

  - by Pacha

  I have some kind of distortion on the texture of my 3D model. It works perfectly well on an AMD GPU, but when testing on a integrated Intel HD graphics card it has a weird issue. I don't have a problem with the rest of my entities as they are not scaled. The models with the problems are scaled, as my engine supports different sizes for the platforms. I am using Ogre3D as rendering engine, and GLSL as shader language. Vertex shader: #version 120 varying vec2 UV; void main() { UV = gl_MultiTexCoord0; gl_Position = gl_ModelViewProjectionMatrix * gl_Vertex; } Fragment shader: #version 120 varying vec2 UV; uniform sampler2D diffuseMap; void main(void) { gl_FragColor = texture(diffuseMap, UV); } Screenshot (the error is on the right and left side, the top and bottom part are rendered perfectly well):

  Read the article

• HLSL 5 interpolation issues

  - by metredigm

  I'm having issues with the depth components of my shadowmapping shaders. The shadow map rendering shader is fine, and works very well. The world rendering shader is more problematic. The only value which seems to definitely be off is the pixel's position from the light's perspective, which I pass in parallel to the position. struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; The reason that I used the semantic 'TEXCOORD2' on the light's pixel position is because I believe that the problem lies with Direct3D's interpolation of values between shaders, and I started trying random semantics and also forcing linear and noperspective interpolations. In the world rendering shader, I observed in the pixel shader that the Z value of light_pos was always extremely close to, but less than the W value. This resulted in a depth result of 0.999 or similar for every pixel. Here is the vertex shader code : struct Vertex { float3 position : POSITION; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; cbuffer Camera : register (b0) { matrix world; matrix view; matrix projection; }; cbuffer Light : register (b1) { matrix light_world; matrix light_view; matrix light_projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), world); output.position = mul(output.position, view); output.position = mul(output.position, projection); output.world_pos = mul(float4(input.position, 1.0f), world); output.world_pos = mul(output.world_pos, light_view); output.world_pos = mul(output.world_pos, light_projection); output.texcoord = input.texcoord; output.normal = input.normal; return output; } I suspect interpolation to be the culprit, as I used the camera matrices in place of the light matrices in the vertex shader, and had the same problem. The problem is evident as both of the same vectors were passed to a pixel from the VS, but only one of them showed a change in the PS. I have already thoroughly debugged the matrices' validity, the cbuffers' validity, and the multiplicative validity. I'm very stumped and have been trying to solve this for quite some time. Misc info : The light projection matrix and the camera projection matrix are the same, generated from D3DXMatrixPerspectiveFovLH(), with an FOV of 60.0f * 3.141f / 180.0f, a near clipping plane of 0.1f, and a far clipping plane of 1000.0f. Any ideas on what is happening? (This is a repost from my question on Stack Overflow)

  Read the article

• Complex shading using one single (small) texture

  - by teodron

  Recently I stumbled upon a demo reel in UDK about how one can attain beautiful results using just one (rather tiny) texture that's being sent to the shader pipeline. The famous link is this one. Basically, the author states that they've used just one texture and give a snapshot of the technique here. I see that every RGBA channel contains different grayscale information.. and that info could be used to inside a shader to obtain a colour blended output. The problem is that the reel displays a fairly complex scene. To top that, the author even makes use of a normal map. How did they manage to fit a normal map in an already cluttered texture? It makes sense to have a half-space normal map by using only RG from an RGB texture, but what about the rest of the information? Since it was proven to be possible, could someone please explain how it was done (the big picture, not the dirty details!)!? Here's the texture being used. Click to see in full size.

  Read the article

• What does 'postMessage()' do when called on an object tag?

  - by Stephano

  I was recently searching for a way to call the print function on a PDF I was displaying in adobe air. I solved this problem with a little help from this fellow, and by calling postMessage on my PDF like so: //this is the HTML I use to view my PDF <object id="PDFObj" data="test.pdf" type="application/pdf"/> ... //this actionscript lives in my air app var pdfObj:Object = htmlLoader.window.document.getElementById("PDFObj"); pdfObj.postMessage([message]); I've tried this in JavaScript as well, just to be sure it wasn't adobe sneaking in and helping me out... var obj = document.getElementById("PDFObj"); obj.postMessage([message]); Works well in JavaScript and in ActionScript. I looked up what the MDC had to say about postMessage, but all I found was window.postMessage. Now, the code works like a charm, and postMessage magically sends my message to my PDF's embedded JavaScript. However, I'm still not sure how I'm doing this. Any ideas?

  Read the article

• Trouble with object injection in Spring.Net

  - by Abdel Olakara

  Hi all, I have a issue with my Spring.Net configuration where its not injecting an object. I have a CommService to which an object named GeneralEmail is injected to. Here is the configuration: <!-- GeneralMail Object --> <object id="GeneralMailObject" type="CommUtil.Email.GeneralEmail, CommUtil"> <constructor-arg name="host" value="xxxxx.com"/> <constructor-arg name="port" value="25"/> <constructor-arg name="user" value="[email protected]"/> <constructor-arg name="password" value="xxxxx"/> <constructor-arg name="template" value="xxxxx"/> </object> <!-- Communication Service --> <object id="CommServiceObject" type="TApp.Code.Services.CommService, TApp"> <property name="emailService" ref="GeneralMailObject" /> </object> The communication service object is again injected to many other aspx pages & service. In one scenario, I need to call the commnucation service from an static WebMethod. I try doing: CommService cso = new CommService(); But when i try to get the emailService object, its null! why didn't the spring inject the GeneralMail object into my cso object? What am I doing wrong and how do I access the object from spring container. Thanks in advance for the suggestions and solutions. Reagrds, Abdel Olakara

  Read the article

• For each <item> in CheckedListBox. <item> returns as Object and not as Control

  - by Tivie

  Hello there. I have a CheckedListBox previously populated. I want to loop with a "for each / next" through all items in the CheckedListBox and do a lot of "stuff" with each iteration element of the checkedlistbox. example code: For Each item In CheckedListBox1.Items If item.Checked = True Then 'do stuff like item.BackColor = Color.Blue Else 'do other stuff item.BackColor = Color.Brown End If Next the problem is that is an 'Object' type and not a 'Control' type. If I force the iteration var As CheckBox, it throws an InvalidCastException saying that type 'System.String' can't be associated with type 'System.Windows.Forms.CheckBox' I know I can easily work around using for i=0 to CheckedListBox.Items.Count - 1 but I want to use a for each /next loop since I have a lot of code in that loop (and With can't be used) and always poiting directly to the object is something I wish to avoid and I really need the code to be as simple as possible. I actually spent one afternoon looking for this but couldn't find any answer. If someone could be kind enough to enlight me in this, it would be extremely appreciated. Best regards

  Read the article

• Google App Engine how to get an object from the servlet ?

  - by Frank

  I have the following class objects in Google App Engine's dadastore, I can see them from the "Datastore Viewer " : import javax.jdo.annotations.IdGeneratorStrategy; import javax.jdo.annotations.IdentityType; import javax.jdo.annotations.PersistenceCapable; import javax.jdo.annotations.Persistent; import javax.jdo.annotations.PrimaryKey; @PersistenceCapable(identityType=IdentityType.APPLICATION) public class Contact_Info_Entry implements Serializable { @PrimaryKey @Persistent(valueStrategy=IdGeneratorStrategy.IDENTITY) Long Id; public static final long serialVersionUID=26362862L; String Contact_Id="",First_Name="",Last_Name="",Company_Name="",Branch_Name="",Address_1="",Address_2="",City="",State="",Zip="",Country=""; double D_1,D_2; boolean B_1,B_2; Vector<String> A_Vector=new Vector<String>(); public Contact_Info_Entry() { } ...... } How can my java applications get the object from a servlet url ? For instance if have an instance of Contact_Info_Entry who's Contact_Id is "ABC-123", and my App Id is : nm-java When my java program accesses the url : "http://nm-java.appspot.com/Check_Contact_Info?Contact_Id=ABC-123 How will the Check_Contact_Info servlet get the object from datastore and return it to my app ? public class Check_Contact_Info_Servlet extends HttpServlet { static boolean Debug=true; public void doGet(HttpServletRequest request,HttpServletResponse response) throws IOException { } ... protected void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { doGet(request,response); } } Frank

  Read the article

• Why junit ComparisonFailure is not used by assertEquals(Object, Object) ?

  - by Philippe Blayo

  In Junit 4, do you see any drawback to throw a ComparisonFailure instead of an AssertionError when assertEquals(Object, Object) fails ? assertEquals(Object, Object) throws a ComparisonFailure if both expected and actual are String an AssertionError if either is not a String @Test(expected=ComparisonFailure.class ) public void twoString() { assertEquals("a String", "another String"); } @Test(expected=AssertionError.class ) public void oneString() { assertEquals("a String", new Object()); } The two reasons why I ask the question: ComparisonFailure provide far more readable way to spot the differences in dialog box of eclipse or Intellij IDEA (FEST-Assert throws this exception) Junit 4 already use String.valueOf(Object) to build message "expected ... but was ..." (format method invoqued by Assert.assertEquals(message, Object, Object) in junit-4.8.2): static String format(String message, Object expected, Object actual) { ... String expectedString= String.valueOf(expected); String actualString= String.valueOf(actual); if (expectedString.equals(actualString)) return formatted + "expected: " + formatClassAndValue(expected, expectedString) +" but was: " + formatClassAndValue(actual, actualString); else return formatted +"expected:<"+ expectedString +"> but was:<"+ actualString +">"; Isn't it possible in assertEquals(message, Object, Object) to replace fail(format(message, expected, actual)); by throw new ComparisonFailure(message, formatClassAndValue(expectedObject, expectedString), formatClassAndValue(actualObject, actualString)); Do you see any compatibility issue with other tool, any algorithmic problem with that... ?

  Read the article

• Hibernate not loading associated object

  - by Noor

  Hi, i am trying to load a hibernate object ForumMessage but in it contain another object Users and the Users object is not being loaded. My ForumMessage Mapping File: <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd"> <!-- Generated Jan 4, 2011 10:10:29 AM by Hibernate Tools 3.4.0.Beta1 --> <hibernate-mapping> <class name="com.BiddingSystem.Models.ForumMessage" table="FORUMMESSAGE"> <id name="ForumMessageId" type="long"> <column name="FORUMMESSAGEID" /> <generator class="native" /> </id> <property name="ForumMessage" type="java.lang.String"> <column name="FORUMMESSAGE" /> </property> <many-to-one name="User" class="com.BiddingSystem.Models.Users" fetch="join"> <column name="UserId" /> </many-to-one> <property name="DatePosted" type="java.util.Date"> <column name="DATEPOSTED" /> </property> <many-to-one name="Topic" class="com.BiddingSystem.Models.ForumTopic" fetch="join"> <column name="TopicId" /> </many-to-one> </class> </hibernate-mapping> and I am using the follwing code: Session session = gileadHibernateUtil.getSessionFactory().openSession(); SQL="from ForumMessage"; System.out.println(SQL); Query query=session.createQuery(SQL); System.out.println(query.list().size()); return new LinkedList <ForumMessage>(query.list());

  Read the article

• what's best mind map software?

  - by assaqqaf

  As a programmer I think there is a need to use mind mapping is any prefer by you... or still use hand drawing

  Read the article

• Dapper and object validation/business rules enforcement

  - by Eugene

  This isn't really Dapper-specific, actually, as it relates to any XML-serializeable object.. but it came up when I was storing an object using Dapper. Anyways, say I have a user class. Normally, I'd do something like this: class User { public string SIN {get; private set;} public string DisplayName {get;set;} public User(string sin) { if (string.IsNullOrWhiteSpace(sin)) throw new ArgumentException("SIN must be specified"); this.SIN = sin; } } Since a SIN is required, I'd just create a constructor with a sin parameter, and make it read-only. However, with a Dapper (and probably any other ORM), I need to provide a parameterless constructor, and make all properties writeable. So now I have this: class User: IValidatableObject { public int Id { get; set; } public string SIN { get; set; } public string DisplayName { get; set; } public IEnumerable<ValidationResult> Validate(ValidationContext validationContext) { // implementation } } This seems.. can't really pick the word, a bad smell? A) I'm allowing to change properties that should not be changed ever after an object has been created (SIN, userid) B) Now I have to implement IValidatableObject or something like that to test those properties before updating them to db. So how do you go about it ?

  Read the article

• Issue 55 - Skin Object Tokens, Optimized Control Panel, OWS Validation and Security, RAD

  April 2010 Welcome to Issue 55 of DNN Creative Magazine In this issue we focus on the new Skin Object token method introduced in DotNetNuke 5 for adding tokens into a DotNetNuke skin. A Skin Object Token is a web user control which covers skin elements such as the logo, menu, search, login links, date, copyright, languages, links, banners, privacy, terms of use, etc. Following this we demonstrate how to install and use two Advanced DotNetNuke Admin Control Panels which are available for free from Oliver Hine. These control panels provide an optimized version of the admin control panel to improve performance and page load times, as well as a ribbon bar control panel which adds additional features. Next, we continue the Open Web Studio tutorials, this month we demonstrate some very advanced techniques for building a car parts application in Open Web Studio. Throughout the tutorial we cover form input, validation, how to use dependant drop down lists, populating checkbox lists and introduce a new concept of data level security. Data level security allows you to control which data a user can access within a module. To finish, we have part five of the "How to Build a News Application with DotNetMushroom Rapid Application Developer (RAD)" article, where we demonstrate how to implement paging. This issue comes complete with 14 videos. Skinning: Skin Object Tokens for DotNetNuke 5 (8 videos - 64mins) Free Module: Advanced Optimized Control Panel by Oliver Hine (1 video - 11mins) Module Development Series: Form Validation, Dependant Drop Downs and Data Level Security in OWS (5 videos - 44mins) How to Implement Paging with DotNetMushroom RAD View issue 55 to download all of the videos in one zip file DNN Creative Magazine for DotNetNuke Web Designers Covering DotNetNuke module video reviews, video tutorials, mp3 interviews, resources and web design tips for working with DotNetNuke. In 55 issues we have created 563 videos!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Entity Object Based on PL/SQL

  - by Manoj Madhusoodanan

  This blog describes how to create a PL/SQL based Entity Object.Oracle application has number of APIs and each API will perform numerous number of tasks.We can create PL/SQL based EO which will directly invoke the PL/SQL stored procedure from the EO. Here I am demonstrating using a standard API FND_USER_PKG.CREATEUSER.This API has x_user_name and x_owner as mandatory parameter.My task is to create a user through OAF page which will accept User Name and Password. Following steps needs to be performed to achieve the above scenario. 1) Create FndUserEO as follows Include all the API parameters and WHO columns in the EO. Make UserName and EncryptedUserPassword ( Here I am not using Encrypted Password. The column name is same as table column so I am keeping the same) column as mandatory. Generate VO. 2) Edit FndUserEOImpl and add the following 3) Attach FndUserVO to AM 4) Create the UI 5) Deploy following files to middle tier and restart the server.  Entity Object: xxcust.oracle.apps.fnd.user.schema.server.FndUserEO.xml xxcust.oracle.apps.fnd.user.schema.server.FndUserEOImpl.java View Object: xxcust.oracle.apps.fnd.user.server.FndUserVO.xml xxcust.oracle.apps.fnd.user.server.FndUserVOImpl.javaUser Interface: xxcust.oracle.apps.fnd.user.webui.CreateFndUserCO.java xxcust.oracle.apps.fnd.user.webui.CreateFndUserPG.xmlYou can test by giving User Name and Password.

  Read the article

• Changing the material on an object on click in unity

  - by user1509674

  Iam working on unity2d.I have six game object Object1,Object1,Object1,(these are images) ObjectImage1,ObjectImage2,ObjectImage3(these are images). I have arranged the object in the scene as a list one below another Object1 Object2 Object3 When I click the Object1 --- should change to ObjectImage1 Object2 ----should change to ObjectImage2, but the above image of object1(objectImage1) at present should change to Object1 Object3 ----? should change to ObjectImage3,but the above image on object2(objectImage2) should change to Object2 These is similar to selection.I have coded Like when I click of Object2 its changing to ObjectIamge2 but the first object is not changing to object1 from objectImage1.Can anybody help me coding it out. Edit: public GameObject newSprite; private Vector3 currentSpritePosition; void Start() { newSprite.renderer.enabled = false; currentSpritePosition = transform.position; //then make it invisible renderer.enabled = false; //give the new sprite the position of the latter newSprite.transform.position = currentSpritePosition; //then make it visible newSprite.renderer.enabled = true; } void OnMouseExit(){ //just the reverse process renderer.enabled = true; newSprite.renderer.enabled = false; } This is the code used to change the material: public GameObject newSprite; private Vector3 currentSpritePosition; void Start(){ newSprite.renderer.enabled = false; } void OnMouseEnter(){ //getting the current position of the current sprite if ever it can move; currentSpritePosition = transform.position; //then make it invisible renderer.enabled = false; //give the new sprite the position of the latter newSprite.transform.position = currentSpritePosition; //then make it visible newSprite.renderer.enabled = true; } void OnMouseExit(){ //just the reverse process renderer.enabled = true; newSprite.renderer.enabled = false; }

  Read the article

• how to link a c++ object to a local variable in Lua

  - by MahanGM

  I'm completing my scripting interface with Lua, but recently I've stuck at some point. I have several functions for my Entitiy events like Update(). I have a function called create_entitiy() which instantiate a new entity from a given entity index: function Update() local bullet = create_entity(0, 0, "obj_bullet") end create_entity returns a table which is the properties of the created entity. Now how can I make a connection between bullet variable and my newly created object? Right now for previously added objects to the scene, I simply set a global table for each of them and then after every call to Update(), I go through registered names to find object tables and perform new changes. Like the one below: function Update() if keyboard_key_press(vk_right) then obj_player.x += 3 end I can get obj_player table because I know its name from C++, plus I can get it as a global table and simply reach for the first instance named obj_player. Is there any solution for me to make bullet variable act like this? I was thinking to get all local variables in Update() function and check for every one to see if is it table and it has an unique field attached to it like id, this way I can determine that this is an object table and do the rest of the process. By the way, is this interface going to work easier with luaBind if I implement it? Bottom line: How can I make a local variable in Lua that receives a table from create_entity function and track that local variable to capture it from C++. e. g. function Update() local bullet = create_entity(0, 0, "obj_bullet") bullet.x = 10 <== Commit a change in table end Now I want to get variable bullet from C++. And it's not just this variable, there might be a ton of these local variables with different names.

  Read the article

• 3D zooming technique to maintain the relative position of an object on screen

  - by stark

  Is it possible to zoom to a certain point on screen by modifying the field of view and rotating the view of the camera as to keep that point/object in the same place on screen while zooming ? Changing the camera position is not allowed. I projected the 3D pos of the object on screen and remembered it. Then on each frame I calculate the direction to it in camera space and then I construct a rotation matrix to align this direction to Z axis (in cam space). After this, I calculate the direction from the camera to the object in world space and transform this vector with the matrix I obtained earlier and then use this final vector as the camera's new direction. And it's actually "kinda working", the problem is that it is more/less off than the camera's rotation before starting to zoom depending on the area you are trying to zoom in (larger error on edges/corners). It looks acceptable, but I'm not settling for only this. Any suggestions/resources for doing this technique perfectly? If some of you want to explain the math in detail, be my guest, I can understand these things well.

  Read the article

• How to make the members of my Data Access Layer object aware of their siblings

  - by Graham

  My team currently has a project with a data access object composed like so: public abstract class DataProvider { public CustomerRepository CustomerRepo { get; private set; } public InvoiceRepository InvoiceRepo { get; private set; } public InventoryRepository InventoryRepo { get; private set; } // couple more like the above } We have non-abstract classes that inherit from DataProvider, and the type of "CustomerRepo" that gets instantiated is controlled by that child class. public class FloridaDataProvider { public FloridaDataProvider() { CustomerRepo = new FloridaCustomerRepo(); // derived from base CustomerRepository InvoiceRepo = new InvoiceRespository(); InventoryRepo = new InventoryRepository(); } } Our problem is that some of the methods inside a given repo really would benefit from having access to the other repo's. Like, a method inside InventoryRepository needs to get to Customer data to do some determinations, so I need to pass in a reference to a CustomerRepository object. Whats the best way for these "sibling" repos to be aware of each other and have the ability to call each other's methods as-needed? Virtually all the other repos would benefit from having the CustomerRepo, for example, because it is where names/phones/etc are selected from, and these data elements need to be added to the various objects that are returned out of the other repos. I can't just new-up a plain "CustomerRepository" object inside a method within a different repo, because it might not be the base CustomerRepository that actually needs to run.

  Read the article

• Entity Object Extension in Oracle Application R12

  - by Manoj Madhusoodanan

  In this blog I will explain how to perform Entity Object ( EO ) Extension.As a prerequisite please read my previous blog.I am doing this exercise based on PL/SQL EO. Following attributes are part of FndUserEO. Here I will add a validation to UserName attribute "Length should be > 5". Following steps need to perform. 1) Download all files of  "Entity Object Based on PL/SQL" to JDEV_USER_HOME/myprojects and JDEV_USER_HOME/myclasses.If you want to see the content of source java file decompile it and save it in JDEV_USER_HOME/myprojects. 2) Create new Entity Object XXFndUserEO as follows. Include all attributes of parent EO. 3) Add the validation code snippet to XXFndUserEOImpl.java as follows. 4) Create the substitution as follows. 5) Migrate files to $JAVA_TOP. xxcustom.oracle.apps.fnd.user.schema.server.XXFndUserEOImpl.javaxxcustom.oracle.apps.fnd.user.schema.server.XXFndUserEO.xml 6) Migrate the substitution.. 7) Bounce the server. 8) Verify the substitution has applied properly. Access Create User Page and create a User. You can see the validation message if user name length is less than 5. Give User Name as XXCUST4 and verify the table.   The FND_USER has created successfully.

  Read the article

• How to perform game object smoothing in multiplayer games

  - by spaceOwl

  We're developing an infrastructure to support multiplayer games for our game engine. In simple terms, each client (player) engine sends some pieces of data regarding the relevant game objects at a given time interval. On the receiving end, we step the incoming data to current time (to compensate for latency), followed by a smoothing step (which is the subject of this question). I was wondering how smoothing should be performed ? Currently the algorithm is similar to this: Receive incoming state for an object (position, velocity, acceleration, rotation, custom data like visual properties, etc). Calculate a diff between local object position and the position we have after previous prediction steps. If diff doesn't exceed some threshold value, start a smoothing step: Mark the object's CURRENT POSITION and the TARGET POSITION. Linear interpolate between these values for 0.3 seconds. I wonder if this scheme is any good, or if there is any other common implementation or algorithm that should be used? (For example - should i only smooth out the position? or other values, such as speed, etc) any help will be appreciated.

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >