Search Results

Search found 4343 results on 174 pages for 'verizon wireless'.

Page 48/174 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Organizations Ride Sprint's 4G Wireless Wave

  Sprint's 4G wireless services are finding their way into organizations as diverse as a Chicago food bank and the Portland, Oregon Police Bureau.

  Read the article

• In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

  - by Bobby Burgess

  This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

  Read the article

• Wireless very slow on one laptop on network, all other machines normal?

  - by th3dude19

  My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

  Read the article

• Upgrade a Retro Corded Mouse with Wireless Bluetooth Connectivity

  - by Jason Fitzpatrick

  If there’s a beloved retro mouse gathering dust in your office closet for want of wireless connectivity, this detailed tutorial will guide you through upgrading the guts to turn your corded mouse into a Bluetooth model. If you’re handy with a soldering iron and not afraid to hack apart the guts of a modern but inexpensive Bluetooth mouse, you should have no trouble digging right into this project. The end result is a modern mouse packed inside the casing of your old mouse–same old look and feel, brand new engine inside. Hit up the link below to check out the full tutorial. Retro Wireless Apple Mouse [via Lifehacker] HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• Additional Drivers error installing in Ubuntu 12.04 (wireless internet and software modem)

  - by gabiro

  I've already search for similar problems but they are so different from mine. these are the drivers http://db.tt/qFZlD5JD I'm having problem with this Additional Drivers once I click the Activate button it will start in downloading and installing but after that it will say Installation failed. Then the "Enable Wireless" will not be available. With the Software Modem issue is the same problem with the Broadcom. These drivers are working on Ubuntu 9 and 11 if I'm not mistaken. Only on 12.04 is not working. One more thing these drivers will enable the Huawei E165g E220. I've already tried other solution for the Huawei to activate but all didn't work. After a restart Enable wireless becomes okay, though. To all Ubuntu experts and masters please I'm begging for help. A million Thank You!.

  Read the article

• Apple wireless mouse and keyboard doens't work

  - by drigoSkalWalker

  I paired the mouse and keyboard on ubuntu, but it seems not work. I got this error in /var/log/syslog kernel: [ 1875.935712] input: Apple Magic Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:2/input34 kernel: [ 1875.935885] evdev: no more free evdev devices kernel: [ 1875.935893] input: failed to attach handler evdev to device input34, error: -23 kernel: [ 1875.936049] magicmouse 0005:05AC:030D.0003: input,hidraw0: BLUETOOTH HID v3.06 Mouse [Apple Magic Mouse] on 00:19:5D:0F:4A:F6 kernel: [ 2334.787710] input: Apple Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:4/input36 kernel: [ 2334.787729] evdev: no more free evdev devices kernel: [ 2334.787737] input: failed to attach handler evdev to device input36, error: -23 kernel: [ 2334.787999] generic-bluetooth 0005:05AC:0255.0005: input,hidraw1: BLUETOOTH HID v0.50 Keyboard [Apple Wireless Keyboard] on 00:19:5D:0F:4A:F6 Nothing appears in xinput --list, only the wired mouse and keyboard. How to fix that?

  Read the article

• Why does my computer sometimes not identify my wireless network, or others, that it always connects to?

  - by Emile Erasmus

  I have a vista operating system. Sometimes my computer will not connect to the wireless network (internet) when I start up my laptop. This happens at different places on occasion, and it is very random. It tries to connect, but can not identify the network (it does recognize the wifi name). So at the end it connects, but with limited connectivity. It can not be the hardware because all other computers connect to it fine at the same time. And it happens at different places, mostly home, but sometimes at coffee shops, etc. And then in a day or two when I start up my laptop it is all of a sudden working again. (restart does not solve the problem). I have tried all the trouble shooting options windows offers, restarting the notebook, switch modem on and off, switch laptop wifi on and of, deleted the wifi memory from the laptop and reconnected with the password as if it was the first time, everything. If it does not work at one place it does not mean it won't work at another. Example it won't work at home, then I go to coffee shop and it works, then get back home and it don't. Anyone encountered this before?

  Read the article

• Sony VAIO wireless card not connecting intel 4965AGN

  - by marcski55

  I'm running a Sony VAIO VGN-CR410E, and recently moved it to Ubuntu from Windows 7. Both my home and work networks (which I maintain) run WPA/WPA2-PSK authentication for security. My wireless network card (intel 4965AGN) will not connect to them unless I am in the same room (kind of defeats the purpose of wireless). The PC is 4 years old and the routers are brand new (last month or so). Had no problems with it with Win7, but Ubuntu just doesn't like the networks. As an IT manager, my laptop needs to work, so any help is appreciated. If this is a duplicate, please let me know of what. I've spent hours searching and nothing has worked. Thanks for your help. (This is my first experience fully relying on Ubuntu). I can see the networks and attempt connection, but it fails authentication. Let me know of any code you need.

  Read the article

• How to configure Windows 2008 R2 server for LAN and wireless internet connections

  - by Alchemical

  For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

  Read the article

• How to make ad-hoc network connection?

  - by Johan Nathaniel Soedjono

  I can't make ad-hoc from my netbook (Ubuntu 12.04). It has internet source from ethernet. I have tried making from network manager. But it always says 'Wireless Network Disconnected' and can't be detected by neither my other laptop nor my cell phone which have wifi. How can I make adhoc from it? I have already tried making a connection in Network Manager a lot of times, but it still can't connect and appear notification 'Wireless Network Disconnected'.

  Read the article

• Ralink-based USB Wi-Fi adapter drops connection after some time

  - by Hector Aguilar

  I have an Intellinet Wireless 150N USB adapter (based on a Ralink rt3070 chip) in an Ubuntu 10.10 installation. The problem is, that it's dropping the connection after being connected to a wireless network for 10 - 20 minutes. I have to unplug it and plug it in again every time this happens. I read somewhere, that I need to blacklist some chipset modules, but I don't how? And which ralink modules I have to blacklist? Thanks for your answers! :D

  Read the article

• Create an ad-hoc connection that looks like a wifi connection from a router

  - by James

  I have a Vizio tablet (running a modified version of Android 2.3.2) which, for some reason or another, refuses to list Windows ad-hoc wifi connections on it's wifi connection screen. It can connect to wifi networks served from a normal router, but the wireless bit of my home router is broken, so I'd like to share the internet connection through my laptop's wifi card until the new router arrives. Is it possible to create an ad-hoc network in Ubuntu that looks like a normal wireless network to my tablet?

  Read the article

• Can't enable wifi on vaio CW ubuntu 12.04

  - by rastemoh

  I was using my wifi with no problem, but an hour ago I switched it off from system settings and then tried to turn it on again, but no success. it's about 1 month I am using it and I had no problem with WIFI except this one. I rebooted and went to windows 7, but even that OS can't turn it on!! this is rfkill list all: 0: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• 2 internet connections

  - by oshirowanen

  If I have a wireless and a usb internet connection on my Ubuntu 12.04 as in: At the moment, Ubuntu seems to only make use of the Wired connection which is the usb connection. Is it possible to get ubuntu to use the wireless connection without unplugging the wired connection? So basically, as will, I would like to switch between the connections without unplugging any of them while leaving them both enabled. Is this possible?

  Read the article

• How to fix "ndiswrapper not found"?

  - by Tom

  I've been using ndiswrapper to make work some wireless cards using its Windows drivers, because they are not yet supported by free Linux drivers. Until Ubuntu 12.04. Now, I can install Windows Wireless Network Drivers (ndisgtk) from Ubuntu Software Center but when I try to load the driver, I get an error message saying FATAL: Module ndiswrapper not found. I get the same error if I type on a terminal sudo modprobe ndiswrapper. How can I workaround this bug until it's fixed?

  Read the article

• Wifi card on an virtualbox's ubuntu [duplicate]

  - by user1611830

  This question already has an answer here: Wireless Network in Virtualbox 8 answers I am using a virtualbox to run ubuntu on an osx machine. The problem is that I can't get any wireless extensions when running iwconfig. How can I manage that to connect directly my ubuntu to an wifi card ?

  Read the article

• Problem connecting to certain wifi networks

  - by Romas

  I'm using lenovo u300s (it has Intel Centrino Wireless-N 1030 card), and I can connect to wireless network at home with no problem, but I can not connect to any networks at my university. I'm not sure if it's the case but most of university networks are open and you need to sign up your username as you enter browser. There is also an eudoroam network, but I can not connect to it either. Any suggestions? Yes I have the latest ubuntu version.

  Read the article

• corrupted, hidden, wireless network adapter from "Network Connections" in Windows 7

  - by srihari reddy

  The issue is that when I install a wireless network adapter on my Windows 7 Professional machine I have no connectivity, the system tray icon has a red X. First, I tried the obvious, install updated drivers from the manufacturer. When I did this, the Network Connections icon had gray bars and there was no connectivity. So I tried installling the network adapter on a different computer on the same network and I verified that it does work with no issues. Next, I ran scan disk with no issues. Next, I ran sfc as admin with no issues. At this point I turned to the router and turned SSID broadcast on but that didn't help. I turned MAC address filtering off at the router but that didn't help. Whenever I installed the original network adapter (a wireless N usb adapter with WPA2 TKIP+AES) it showed up as "Wireless Network Connection 2" with a grayed out icon and no connectivity. Lastly, I tried installing two different "verified working" usb wireless adapters on to the Windows 7 Pro machine. The results were the same "Wireless Network Connection 2" that had a green bar icon but no connectivity. I installed the manufacturers software and it indicated the NIC was not there even thought the driver installed successfully in Device Manager. I guess I should mention, I first tried (insanely in vain) to use the (worthless) Windows Network troubleshooter. The results were....drumroll please... There is a problem with the network adapter... well No Duh! Also, during all of this the network adapter is always showing as "Working Properly" in the properties dialogue of Device Manager for the wireless NIC. I checked for hidden devices in Device Manager but there were none. Here is my fundamental question that I've tried to find in the Windows 7 support center with no luck. How do I remove/delete/uninstall network adapters from the Windows 7 registry? in particular hidden, corrupted network adapters, that used to be working.

  Read the article

• WRT54GL Tomato Router in Client wireless mode to an iPhone Personal Hotspot

  - by Gordo

  I am trying to connect a router with Tomato firmware to an iPhone 4. The goal is to connect to the Personal Hotspot in Client Wireless mode. This should allow wired and wireless users to connect to the router rather then the iPhone. In theory this should be possible but I am having difficulty. Router Linksys WRT54GL Tomato 1.28.1816 firmware iPhone iPhone 4 iOS 5.1 (9B176) Carrier Rogers Wireless Personal Hotspot works with other devices, wifi/bluetooth/usb iPhone Personal Hotspot settings Mode: B/G Security: WPA or WPA2 Personal Encryption: AES Router IP: 172.20.10.1 Subnet: 172.20.10.0 Min IP: 172.20.10.2 Max IP: 172.20.10.14 maximum number of wireless tethered hosts is 5 I have followed the directions here: http://www.wi-fiplanet.com/tutorials/article.php/3810281 Ensured that the router subnet does not 'collide' with the iPhone subnet. Here is the configuration of the Tomato 'Basic - Network - Wireless' section: http://i.stack.imgur.com/pbmTB.png I have tried several variations of this configuration, but nothing seems to work. NOTE: I have successfully connected to my own wifi network in Wireless Client mode, so I am confident that there are no bad cables or other hardware issues. I would prefer to use Tomato, but DD-WRT maybe my only other option. Thanks!

  Read the article

• How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

  - by user26453

  I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

  Read the article

• How can an iPhone access another non-iPhone device over wireless or bluetooth?

  - by Tai Squared

  I'm trying to figure out if an iPhone can connect to another non-iPhone device over wireless or bluetooth and have seen conflicting information. Much of what I've found was before version 3.0 of the SDK came out, when it certainly wasn't possible. Looking at questions like this mention you can't connect to an arbitrary device unless if it's part of the "Works for iPhone" device. Do I need hardware that is part of this program? Looking through the Apple documentation, it mentions connecting two iPhones, not an iPhone to another Bluetooth device. Then there are articles like this that includes this quote ...and with the newly-announced "standard support" should allow file transfer between the iPhone and a computer, as well as between nearby iPhones Other questions mention Bonjour, and the Apple documentation talk about connecting to Bonjour devices, but can an iPhone connect to any Bonjour device? Does it have to have a wifi connection, or can it use Bluetooth? Even if I could use Bluetooth to connect to another device, it won't be available on first generation iPhones and iTouches, I believe. Is that correct? I'm thinking of an iPhone application that would need to communicate with other non-iPhone devices in the area, probably using Bluetooth, but possibly a direct wireless connection. What are the possibilities and limitations of this approach? Is it not possible to have an iPhone connect to an arbitrary Bluetooth device? Does the other device have to be on a wireless Bonjour network that? I'm trying to figure out if it's even possible for this to work or if it's not worth the effort.

  Read the article

• Stable ubuntu distribution for a broadcom bcm4313 wireless driver and an nvidia 630 graphics adapter

  - by Vivek Pradhan

  I have been trying to completely shift to ubuntu or a linux distro for almost 2 years now. I have tried all the ubuntu distros starting from 10.04 through 11.10, but there has always been some bugs with the display drivers or the wireless cards not being recognised and the additional drivers suggested from the ubuntu community not doing the trick always. I tried a lot to fix bugs, checked a lot of forums, launch pad, got some of them fixed, but could not really get a neat and complete ubuntu machine set up till now. Now I really like the whole open source community and the linux platform, my pc at home runs ubuntu 11.04 perfectly but there have been some glitches always with ubuntu on my laptop that has forced me to stick with windows only. Now I am currently on an hp dv6 laptop that has the broadcom bcm4313 wireless driver and the nvidia 630gtm graphics(optimus) driver. Now I tried to do some research on the support of these drivers in linux machines but could not get anywhere. So I would really appreciate if you guys could suggest some linux distro that I could use that has full support of these drivers or has stable bug fixes for these kind of issues. I tried precise pangolin (LTS) through a live CD but i still see a problem with wifi networks which is a little frustrating. Please help me find the perfect match for my laptop :P I would gladly provide any other information necessary.

  Read the article

• Old Lock Retrofitted for Wireless and Key-free Entry

  - by Jason Fitzpatrick

  What do you do if the old key your landlord gave you is poor fit for your apartment’s lock? If you’re the geeky sort, you build a wireless unlocking module to do the work for you. Instructables user Rybitski writes: The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a pain. Changing the lock wasn’t an option, but eliminating the need to use a key was. To that end, he built the device seen in the video above. An Arduino Uno drives a servo which in turn opens the deadbolt. The whole thing is controlled by a simple wireless key fob. Hit up the link below for the full build guide including code. Key Fob Deadbolt [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• How do I connect my NetXtreme BCM5755M Gigabit Ethernet PCI Express in y Dell latitude d630?

  - by Stanton.Sculpture

  Trying to get my 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) working with my wifi. I just installed Raring Ringtail on this dell latitude D630 and I can't get it to connect without a wifi dongle. This is what I got when I typed sudo lshw -c network: *-network description: Ethernet interface product: NetXtreme BCM5755M Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 02 serial: 00:21:70:98:04:32 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.128 firmware=5755m-v3.29 latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:fe8f0000-fe8fffff *-network description: Wireless interface physical id: 2 bus info: usb@2:1 logical name: wlan0 serial: 7c:dd:90:11:a0:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.8.0-31-generic firmware=0.29 ip=10.0.0.8 link=yes multicast=yes wireless=IEEE 802.11bgn Also, when I go to additional drivers in the software and updates settings, no proprietary drivers show up. I've tried sudo apt-get install b43-fwcutter firmware-b43-installer because it worked on a bunch of old Dell laptops that I converted over before, but it didn't work on this one. Is this driver even compatible with wifi? Please help.

  Read the article

• mediatek 7630e 802.11 wifi bgn adapter failed in hp probook G1

  - by user257026

  id: network description: Network controller product: MT7630e 802.11bgn Wireless Network Adapter vendor: MEDIATEK Corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency = 0 resources: memory : b0600000-b06fffff THIS IS MY WIFI driver details of my notebook pc.... BY the way.. recently I have installed ubuntu 14.04 LTS .....my every hardware is working properly except wifi adapter.... in windows it(wifi) was also working properly.. from hp driver center I have download linux kernel driver package ..Actually those driver package was rpm package ...then i have convert it to .dev file using alien...but the true fact is no result though..... again,previously released ubuntu version(such as 12.04LTS) causes the same issue ...those versions have same bugs there.. after googling web i have few results but no reliable outcomes to solve my problem(wifi issue) ..... As I am new user in ubuntu I cannot able to solve the problem drastically like pro(superuser).. https://answers.launchpad.net/ubuntu/+question/243203 How do I get a Mediatek MT7630E 802.11bgn Wi-Fi Adapter working? here two links about my issuses but I am confused what can i do (feeling meh)??? is there anyone who can help me in this issues...?? my notebook model is HP probook 450G1 Question #243203 : Questions : Ubuntu My HP laptop uses MediaTek's (MEDIATEK Corp.) MT7630e 802.11bgn Wireless Network Adapter. I cannot access wifi after installing Ubuntu myself and there are no drivers available - or so it seems. Apparantly some laptops which use this card came with Ubuntu pre-installed, with working drivers. These d… answers.launchpad.net Question #243203 : Questions : Ubuntu My HP laptop uses MediaTek's (MEDIATEK Corp.) MT7630e 802.11bgn Wireless Network Adapter. I cannot access wifi after installing Ubuntu myself and there are no drivers available - or so it... ANSWERS.LAUNCHPAD.NET

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >