Search Results

Search found 16472 results on 659 pages for 'computer scientist'.

Page 485/659 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• Migrate to SSD - NTFS mount point for Program Files

  - by Icode4food

  Here is my thought. I have a new computer that I just built and am considering migrating to a SSD. I have Windows all setup and my Development environment configured so I want to avoid having to re-install a bunch of stuff. My thought is to clone my OS (win7) to the SSD and then mount a HDD partion to C:\Program Files (x86)\ with C being my SSD. This way as far as the programs are concerned they still live on the C drive but in reality they are physically located on the HDD. This seems to me like a good idea but after searching around a bit and not having found anyone else that had the same idea, I'm wondering why not. Maybe I am missing something that is obvious to everyone but me. Why is this a good or a bad idea?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by Wawa wiya

  Hello I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• wireless dropping out

  - by Sam

  My wireless network connection is dropping out and its driving me nuts. It is weird because it happens at totally random intervals and other devices work while my computer has been dropped. Both my USB dongle and wifi card randomly disconnect from the router and I am unable to connect for a couple of minutes. It is especially irritating because two different adapters are failing at the same time, sounds like a software problem to me, but where? Both my laptop and iPod remain connected when the connection drops. What on earth is happening? I doubt its the router because the other devices would disconnect as well.

  Read the article

• Why is my disk full?

  - by Agmenor

  I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

  Read the article

• How to force Windows to call the partition it installs on C:?

  - by maaartinus

  I'm going to install Windows XP from a CD and want to make sure it calls the partition it lands on C:. The target partition is the first one on a SATA disk, which is not the first one in my computer. There's no IDE disk there. I don't think I can swap the disks, as I'm using a fake RAID and really don't want to get problems with it. The target partition is on a normal disk. I know it may be unimportant, but I don't want to run in any problems I can avoid. I've seen a question slightly related to it, but I'm not going to install from a USB.

  Read the article

• Wifi won't connect to certain networks

  - by Dave M G

  As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

  Read the article

• Help deciding on language for a complex desktop - web application

  - by user967834

  I'm about to start working on a fairly complex project needing a desktop GUI as well as a web interface and I need to decide on a language(s) to use. This is from an electrical engineering/robotics background. These are the requirements: Program will have to read data from multiple sensors and inputs (motion sensor, temperature sensor, capacitive sensor, infrared, magnetic sensors, etc) through a port on a computer - so either through USB or ethernet. Program will have to be able to send control signals based on this input. Program will have to continuously monitor all input signals at all times - so realtime data. Program will require authentication. Program will need to be controllable from a web interface from anywhere via logging in to a website. Web interface will also need to have realtime feedback once authenticated. What language do you think would best accomplish this? I was thinking maybe saving everything into a database which can be accessed by both the desktop and web app? And would Python be able to do all of this? Or something like a remote desktop app? I know this is a complex project but let's assume I can learn any language. Has anyone done something like this and if so how did you accomplish it?

  Read the article

• Can't login to Unity 3d after enabling Xinerama for a short moment

  - by Amir Adar

  Today I connected a second monitor to my computer. I set it up using nVidia's control panel, and all was working quite well, so I figured it won't be a problem to try Xinerama, just to see the difference between that and twinview. After enabling Xinerama and restarting the X session, I saw that I was logged into a Unity 2d session. I thought it was a problem with Xinerama, so I switched back to twinview, but it still logged me into Unity 2d. I tried disconnecting the second monitor, no luck: still Unity 2d. I tried changing GPU drivers and installing drivers from a separate ppa, and still I was logged into Unity 2d. Up until this point, I didn't have any problem logging into Unity 3d. It only happened after I tried using Xinerama. I should note that I was doing all this while updates were going on in the background, so it could be something related to that, though I can't imagine what (I tried booting with another kernel, but no luck). So what exactly happened? Did changing the mode to Xinerama triggered some other changes that I'm not aware of? Did these updates cause a certain malfunction in the driver? Is it something else?

  Read the article

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

• Is PCI Express x4 faster or slower than a standard PCI slot for graphic cards?

  - by Stephen R

  I am looking at potential motherboards for a computer I want to build and ran into this conundrum. The motherboard has two PCI Express slots that allow for 16 channel cards to fit in them. The catch is only one of them operates at 16 channels, the other operates only 4 channels. My question is, would it be faster to buy a PCI Express graphic card and install it in the 4 channel PCI Express slot? Or would it be better to buy a standard PCI graphic card and install it in one of the available PCI slots?

  Read the article

• Where can I find more information on "Kinds of Information Systems" [on hold]

  - by arielnmz

  Disclaimer: This is not a Power User question, but rather more of the Computer Enthusiasts kind. Also, I don't know the right site to post this kind of question. I'm writing a paper in which I am asked to mention and describe "5 types of information systems" to which my teacher explained: Like Web, Mobile, etc…, for example… He also said that we're not able to mention and describe those mentioned above. So the question is: What is the right topic to research or look into for more information about these different types of "information systems"?

  Read the article

• Neverending issues with grub (ubuntu 14.04 on ASUS with Win8 dual boot)

  - by Mariana

  This is the most frustrating issue I have ever run into using Ubuntu and Windows in the same machine. I have an ASUS K46CB, 6GB RAM and preinstalled Windows 8.1 64-bits. I have successfully installed Ubuntu 14.04 LTS, also 64-bits. To do so,I followed this tutorial whenever possible. I only failed on the disable secure boot part: there is no 'Secure-boot' or even UEFI mention in my BIOS! Screenshots from other BIOS of the same model show the option under Boot, but in mine there is absolutely none. Because of this, I cannot boot into Ubuntu. The computer loads straight into Windows. I tried running boot repair, but got an error (i can show the log, but it's pretty long). Does anyone know how to fix this issue? UPDATE I reinstalled Ubuntu. Same problem, goes straight to Window. Boot-Repair informs me that i am using Windows in Legacy mode. It excecuted with no errors this time, but after restarting GRUB was still missing. I can't turn off Secure Boot yet. UPDATE I tried using Boot Repair to install grub on a boot-grub 1mb partition. Still boots straight to windows. I feel like punching something

  Read the article

• View changelog of all packages to be upgraded before upgrading

  - by Stein G. Strindhaug

  When using synaptic on my Ubuntu desktop computer i can review all changelog of all the packages to be upgraded, and unselect a package for upgrade if I want. On my desktop I usually install everything, but I like to at least review what the changes are so that I can delay the upgrade if I suspect it could cause problems with the development tools I use. On a server (Ubuntu Server) with no x-server how can I do the same thing on the console: list all packages that will be updated (apt-get --dry-run upgrade does this along with a lot of noisy simulated install messages), view the changelog (if any) from last upgrade to the version it will be upgraded to. select which packages I want to ignore, or which I want to upgrade I've searched a lot for this but I haven't found anything, possibly I'm not using the correct terminology; but surely this must be possible. Synaptic must get it's info from some some low-level tool I assume? Complicated shellscripts are welcome too, if this is not already easily done with the existing tools.

  Read the article

• Using onboard and pci-e graphics card at the same time

  - by Endle

  Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

  Read the article

• How computers display raw, low-level text and graphics

  - by panic

  My ever-growing interest in computers is making me ask deeper questions, that we don't seem to have to ask anymore. Our computers, at boot, as far as I understand it, are in text mode, in which a character can be displayed using the software interrupt 0x10 when AH=0x0e. We've all seen the famous booting font that always looks the same, regardless of what computer is booting. So, how on earth do computers output graphics at the lowest level, say, below the OS? And also, surely graphics aren't outputted a pixel at a time using software interrupts, as that sounds very slow? Is there a standard that defines basic outputting of vertices, polygons, fonts, etc. (below OpenGL for example, which OpenGL might use)? What makes me ask is why OS' can often be fine without official drivers installed; how do they do that? Apologies if my assumptions are incorrect. I would be very grateful for elaboration on these topics!

  Read the article

• How to delete "System Volume Information" folder from external drives?

  - by Nadude

  I'm running Vista Prof 32bit on a lenovo w500 thinkpad. I have four external drives and use 4 different PCs, that all have system volume information folders, taking up lots of space, and I can't delete them. I don't even know which computer's files are backed up on which external. I've used Thinkvantage rescue and recovery to delete all backups, as well as checked system restore settings to only use my main C drive. I checked all the PC's to ensure only the Main drive keeps system restore points and deleted previous versions. I ran Disc Clean up too. But I can't figure out how to get rid of these large folders from my external drives.

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• Can't access internet even though everything is working

  - by entity64

  A friend recently upgraded to a new cable internet connection. The modem connects to the router and various PCs and smartphones from her roommates connect to the router. They don't have any problem accessing the internet. She has Windows 8 and can't access any website (via wifi and ethernet). DNS (UDP) is working, DHCP set up everything correctly, Wifi is working, Trace routes and Pings (ICMP) go through with no problem at all. But neither Dropbox nor Skype nor Spotify nor any browser (all TCP) can access any website. The thing is though, she can connect through the university wifi and via a neighbors wifi. It's just her home connection. No firewalls are running and the computer is clean - no malware. How could it be that only her home connection won't work and others do?

  Read the article

• How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

  - by igoryonya

  I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

  Read the article

• Why is Ubuntu unmounting my primary hard drive?

  - by Twisol

  I'm running Ubuntu 10.10 on my laptop (an Asus G73j), dual-booting Windows 7 if that matters. After using the computer for couple of hours or so, I get a popup complaining that a file was unmounted, then my GNOME desktop panels disappear. I can't save any unsaved work (the file browser shows "Filesystem" as totally empty), and other programs break in odd ways (like Chrome can't browse to any new pages, but keeps current ones going... at least I still have Pandora to listen to when this happens!). I've tried looking in the system logs to no avail; I'm assuming that it can't write any errors to the logs because, of course, the logs are on the primary hard drives. This started happening maybe a few days ago. Yesterday I upgraded from 10.4, but I believe it was happening before then. Any advice for figuring this out? EDIT: It just happened again, and I heard a small little clicky sound from the hard drive about five seconds before things went south. I'm thinking I should start backing up ASAP. In response to a comment, here's the dmesg output: http://askubuntu.pastebin.com/uYGshBay Also, the SMART status says the disk has a few bad sectors, and the detailed data says there are 14. It says it passed the self-assessment though. Lastly, this doesn't seem to be happening when I'm on Windows. I recently re-enabled ureadahead (which I disabled ages ago because it was causing Ubuntu to hang at the startup logo), could that be the source of the problem? I've disabled it again to see.

  Read the article

• Weird files in User folder

  - by Vervious

  In my user folder (C:/Users/myAccount/) theres a set of interesting hidden files that I've never seen before (right now it's a fresh install of Windows 7 Ultimate). These are: NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, and NTUSER.DAT(whole chain of numbers and letters).TM.bif, NTUSER.DAT(whole chain of numbers and letters).TMContaineretcetc.regtrans-ms, and another similar one. When I try to delete them, it says the system is using them. I've never seen these files before. Are they ok to delete? Or should I leave them in my home folder? I always keep "Show hidden files" as well as "Show System files" checked, since I prefer being able to see all the files on my computer. If I shouldn't delete them, is there at least a way to tidy them up a bit? Thanks.

  Read the article

• How can I extend the desktop onto an external monitor/projector?

  - by hellocatfood

  I've plugged in a projector into my laptop and I'm attempting to extend the desktop onto it (so that I can run a full screen app on the projector and have the controls on my laptop). I'm able to mirror the screens effectively (it does this by default) but I can't extend it. When I untick "Mirror screens" and press apply it asks me to log out and then back in again but it goes back to mirroring the screens. I'm able to extend desktop on to my external monitor at home, just not this projector. Is there a manual way or other way to do this other that through Monitors setting? My computer model is Dell Studio 1555: Pentium Dual Core T4300(2.1GHz,800MHz,1MB), 4096MB 800MHz DDR2 Dual Channel, 512 MB ATI Mobility RADEON HD 4570 using the ATI proprietary driver. My screen resolution is 1366x768 (16:9) The projector that it wont connect properly is a Hitachi CPX3. That page specifies that it's especially designed for projectors that use 16:10 aspect ratio, but considering my external monitor at home uses 4:3 should the differences in aspect ratio matter or be causing this error?

  Read the article

• Cannot access to any windows share including localhost

  - by user21936

  I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual windows xp can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

  Read the article

• I believe I need a wireless access point, but can I do it with a wifi router?

  - by Flotsam N. Jetsam

  My needs are simple, I think: I have a laptop upstairs with a usb wifi that I use to connect to my neighbor's wifi which I share (with their knowledge). I have a laser printer downstairs that my wife doesn't wants to stay down there (big, bulky and ugly), but that we both need to print stuff off. It has wired networking and I have wired hub and router down there. The usb wifi on the laptop has absolutley the best reception I've ever seen or heard of. I cannot get onto the neighbor's net with the thing downstairs though--sortof in the ground. What do I need downstairs to give printer access to my laptop wirelessly? One thing I can't do in this solution is have a computer on downstairs, so I would think that would eliminate a usb solution.

  Read the article

• Is it reasonable to require passwords when users sign into my application through social media accounts?

  - by BrMcMullin

  I've built an application that requires users to authenticate with one or more social media accounts from either Facebook, Twitter, or LinkedIn. Edit Once the user has signed in, an 'identity' for them is maintained in the system, to which all content they create is associated. A user can associate one account from each of the supported providers with this identity. I'm concerned about how to protect potential users from connecting the wrong account to their identity in our application. /Edit There are two main scenarios that could happen: User has multiple accounts on one of the three providers, and is not logged into the one s/he desires. User comes to a public or shared computer, in which the previous user left themselves logged into one of the three providers. While I haven't encountered many examples of this myself, I'm considering requiring users to password authenticate with Facebook, Twitter, and LinkedIn whenever they are signing into our application. Is that a reasonable approach, or are there reasons why many other sites and applications don't challenge users to provide a user name and password when authorizing applications to access their social media accounts? Thanks in advance! Edit A clarification, I'm not intending to store anyone's user name and password. Rather, when a user clicks the button to sign in, with Facebook as an example, I'm considering showing an "Is this you?" type window. The idea is that a user would respond to the challenge by either signing into Facebook on the account fetched from the oauth hash, or would sign into the correct account and the oauth callback would run with the new oauth hash data.

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >