Search Results

Search found 16460 results on 659 pages for 'computer towers'.

Page 485/659 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

  • How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

    - by igoryonya
    I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

    Read the article

  • After upgrade to Windows 8.1, no Skydrive icon in task bar

    - by Jeremy Butler
    I upgraded to 8.1 and now I don't see the SkyDrive icon in the task bar, nor the green light under it indicating the my computer is communicating with SkyDrive. When I go into Control Panel |..|Notification Area Icons, SkyDrive is listed and noted as Up to date. However even though I mark it to Show Icons and Notifications I don't see any icon in the taskbar. Is it supposed to be this way, or do I have a problem? I kind of got used to that little green synchronizing indicator giving me a warm and fuzzy feeling.

    Read the article

  • How to setup wireless radio to network using 2 nics?

    - by CptanPanic
    I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

    Read the article

  • Random compositing lag

    - by user1020567
    My laptop specs: 512 mb of RAM, out of which 64 mb are shared with an integrated GPU - ATI Radeon Xpress 200 M. Intel 1,6 Ghz Celeron M single-core processor. I've spent months trying to figure out why compositing and effects sometimes lag on any distro I try. Now I've come to realise that no matter what drivers I try (the default ones work for me on pretty much any linux) compositing lag is random. When I used Ubuntu 10.10, for example, sometimes window compositing would lag and sometimes it wouldn't. The PC is able to render those effects so hardware is not the problem. It's completely random and unpredictable - sometimes when I turn on the computer the effects lag horribly and sometimes it's completely smooth. I've also checked startup items and there doesn't seem to be any unnecessary entries. I also tried building my own OS with Arch Linux and the problem persists there, therefore I can only assume that it's a driver issue of some sort. By default there are lots of drivers supplied with linux distributions. Could it be that they're in the way? The ones that I need are ati/radeon (or both? What's the difference between them?) and there seem to be a lot of others... What should I do?

    Read the article

  • Mouse Hang with voltage fluctuation

    - by user265495
    I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

    Read the article

  • How computers display raw, low-level text and graphics

    - by panic
    My ever-growing interest in computers is making me ask deeper questions, that we don't seem to have to ask anymore. Our computers, at boot, as far as I understand it, are in text mode, in which a character can be displayed using the software interrupt 0x10 when AH=0x0e. We've all seen the famous booting font that always looks the same, regardless of what computer is booting. So, how on earth do computers output graphics at the lowest level, say, below the OS? And also, surely graphics aren't outputted a pixel at a time using software interrupts, as that sounds very slow? Is there a standard that defines basic outputting of vertices, polygons, fonts, etc. (below OpenGL for example, which OpenGL might use)? What makes me ask is why OS' can often be fine without official drivers installed; how do they do that? Apologies if my assumptions are incorrect. I would be very grateful for elaboration on these topics!

    Read the article

  • Can I remotely monitor printf results of a C program?

    - by Mota
    I have a long running C program in which I've started from the Terminal.app using: gdb program_name gdb run I'm using many printf statements to monitor the progress of the program. Unfortunately, the screen of the computer has been frozen since yesterday, but the process is still running. My question is, can I watch the progress of the program (i.e. the results of the printf statements) remotely? I'm not that familiar with the terminal, but I know how to ssh and do some simple terminal tasks. The OS of the machine with the frozen screen is Mac OS 10.6.

    Read the article

  • Is there a software that can remap the keys for a speficic keyboard?

    - by Vilx-
    There are several keyboards attached to my computer. I'd like to remap the keys on ONE of them, but keep the rest as they were. Is there a software that does this? As for the "why" - I have this idea that I'd like to have a "multimedia keypad" which is separate from my main keyboard, but I could not find any online. So I think that I could take a typical USB numpad (they cost like 5$), and remap the keys on one of them. Add appropriate stickers, and I'm all seat, cheaply. I know that it's theoretically possible, but before I get my hands dirty and write my own software, I'd like to see if there's maybe an existing one out there. Oh, yes, I'm running Windows 7.

    Read the article

  • Where can I find more information on "Kinds of Information Systems" [on hold]

    - by arielnmz
    Disclaimer: This is not a Power User question, but rather more of the Computer Enthusiasts kind. Also, I don't know the right site to post this kind of question. I'm writing a paper in which I am asked to mention and describe "5 types of information systems" to which my teacher explained: Like Web, Mobile, etc…, for example… He also said that we're not able to mention and describe those mentioned above. So the question is: What is the right topic to research or look into for more information about these different types of "information systems"?

    Read the article

  • Ubuntu 12.04 takes too long to boot

    - by msPeachy
    I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

    Read the article

  • How can I can delete a project in Aperture, but not in Flickr?

    - by jchatard
    I have a Macbook Air as my only computer ; I store my shots on Flickr. The size of the SSD doesn't allow me to keep all my RAW files on my laptop. So I publish the photographs I like in their final state on Flickr with the built-in feature of Aperture. When I hit delete on a project (in Aperture) the message clearly indicates that all photos synched to any service like Facebook, Flickr or any other will be deleted. How can I can around this without the hacky way of unlinking Aperture from Flickr before deleting the project?

    Read the article

  • Windows XP not starting up anymore (BSOD)

    - by Richard
    When I tried to start my computer running Windows XP yesterday, as I turned on the screen it was stuck at the "Welcome" screen. I had to reset it. After that, I got stuck at the point where the BIOS should load the OS - I turn on the PC, the Motherboard and BIOS post message shows up, then the blinking "thing" in the top left corner shows up 2 seconds, then everything is black. After I let it run for some time in that mode, it automatically restarts. I'm writing this here from a Ubuntu 9.10 Live CD. What can I do to fix this? How can I find out what is wrong? I'm a programmer and okay with doing (very) advanced things in that terms, so if you know something just tell me and I'll try

    Read the article

  • Why does booting from a 64 bit Win 8 USB install work on a 32 bit laptop?

    - by Arabella
    I upgraded a 64 bit Windows 7 laptop to Windows 8 through the Upgrade Assistant, creating a bootable USB without any problems. I installed it successfully. Before I purchased an upgrade for my 32 bit Windows 7 laptop, I decided to boot from the USB with the 64 bit ISO to see what happened. The Windows 8 install screen came up with all the options. Should it not have detected that the laptop is 32 bit and therefore the install should have given an error? I cancelled the install before it did anything, but now I want to know if I need to download the iso again after purchasing the upgrade on my 32 bit laptop? I've read the answers to this question, which confirms what is said in this article - a 32 or 64 bit iso will be downloaded depending on the hardware of the computer you are upgrading. If that is the case, then why did it boot into the install screen?

    Read the article

  • Files and folders disappeared from my desktop

    - by Rob
    Suddenly all files, folders and icons that were on my desktop have disappeared. tried making "show hidden files", no luck. tried using recovery software, but it did not find any of this files, so I assume they were not deletes. c:/Users/<myname>/Desktop does look empty from the Explorer, as well as from cmd. installed MalwareBytes, it did find and remove some malware, but it didn't seem to help. used RogueKiller and it did find some suspicious registry called "HideDesktopIcons". ¤¤¤ Registry Entries : 4 ¤¤¤ [HJ DESK] HKCU\[...]\ClassicStartMenu : {59031A47-3F72-44A7-89C5-5595FE6B30EE} (1) -> REPLACED (0) [HJ DESK] HKCU\[...]\NewStartPanel : {59031A47-3F72-44A7-89C5-5595FE6B30EE} (1) -> REPLACED (0) [HJ DESK] HKCU\[...]\ClassicStartMenu : {20D04FE0-3AEA-1069-A2D8-08002B30309D} (1) -> REPLACED (0) [HJ DESK] HKCU\[...]\NewStartPanel : {20D04FE0-3AEA-1069-A2D8-08002B30309D} (1) -> REPLACED (0) I deleted this registry, rebooted, it only unhid My Computer and User icons, but my desktop stuff is still missing — any ideas what should I do next?

    Read the article

  • Apple Wireless (aluminium) Keyboard on Windows

    - by Dave Arkell
    I have an apple wireless keyboard which I am using with my windows pc and it works excellently, and looks superb. It all connects fine (particularly with a flashed dbt-120). However, I haven't had great success with getting all those useful keys to work with the 'fn' key. I've been using uawks as a way to get it working, but it doesn't always work. Has anyone had success with any other tools to get the fn key working (and therefore creating shortcuts to 'End', 'Home', 'Break', 'Pgup', etc? I should point out that this is not a mac computer, it is a plain old pc.

    Read the article

  • Can Grub be configured to remember the last OS you booted into?

    - by Matthew
    I typically have 2-3 OSes in my boot menu: Ubuntu 10.04 Windows 7 [Sometimes, a third option, such as Ubuntu 10.04 Netbook] If I am in an OS other than the default choice (Windows 7 in this case), and I reboot, Grub boots into Ubuntu 10.04. This shouldn't happen--when I reboot in Windows 7, I want to stay in Windows 7. Is there any way to configure Grub to remember my last choice, and boot into that? Alternatively, it would be even better if Grub only did this when I rebooted (not when I first turn the computer on). I realize this may not be possible, so I'd be happy with simple last-choice-remembering.

    Read the article

  • Installing Oracle11gr2 on redhat linux

    - by KItis
    I have basic question about installing applications on linux operating system. i am going to express my issue considering oracle db installation as a example. when installing oracle database , i created a user group called dba and and user in this group called ora112. so this users is allowed to install database. so my question is if ora112 uses umaks is set to 077, then no other uses will be able to configure oracle database. why do we need to follow this practice. is it a accepted procedure in application installation on Linux. please share your experience with me. thanks in advance for looking into this issue say i install java application on this way. then no other application which belongs to different user account won't be able use java running on this computer because of this access restriction.

    Read the article

  • How can I make VNC faster?

    - by NickAldwin
    I need to remotely access and use my work computer a few times a week. I want to use VNC because of the price. I've used VNC before, mostly on my own network, where it's fast. However, VNC over the internet is incredibly slow. Even at 256 colors and lower, with Aero turned off, it is unbearably slow. I recently used Ammyy Admin to connect to do something requiring a quick reaction time. Ammyy was really fast, with almost no lag, and it was running in full color with Aero on! How can I make VNC faster, like Ammyy is? I'd use Ammyy, but I would probably run into the 15hr/month limit pretty quickly. Any suggestions? [EDIT] I'm currently using UltraVNC.

    Read the article

  • How do I troubleshoot system slowness seen when viewing PDFs or videos?

    - by asp
    Whenever I watch videos, either online of local via Totem and/or open PDF files using evince. The system gets really, really bogged down. All apps get really slow, menus take forever to display, switching windows gives me time to make a coffee, etc. I have a couple of bug reports open on this, but what do I need to do to really troubleshoot the issue? I've purged Adobe Flash from the system, but YouTube HTML5 videos still have the issue. A bunch of PDFs saved locally trigger the problem. And to (temporarily) remove the slowness, I need to shutdown the computer, breath for a few minutes, then restart. A simple reboot does not do the trick. How can I identify the cause? This only started on 13.04. I've had Ubuntu on this machine for a year without a problem until "upgrading" to 13.04. I am not a programmer, but I suspect an issue with the Intel video driver. Is there something I can run which will diagnose this, or are there concrete steps I can follow to find the culprit?

    Read the article

  • Converting an external hard drive to internal

    - by Nathan DeWitt
    I have a WD Elements 1 TB external drive. I'm in a pinch and I need an internal SATA drive. How do I find out if the drive in here is actually a SATA drive? Edit: The WD Elements is a really nice external drive. I gently pried open the top and slid out a 1 TB Caviar Green hard drive. There were four black rubber brackets that slid off easily. One screw removed the SATA -- USB, and then I slid it into my computer.

    Read the article

  • What credentials should I use to access a Windows share?

    - by JMCF125
    Hi, I have installed Samba and CIFS and all that, followed a bunch of tutorials, but still I can't access a share in the separate Windows 7 machine. Before I could access a share in Ubuntu from Windows, but although now I can't for whatever reason; the error of the attempt to mount the Windows share is the same: 13, asking for credentials (the computer with Windows is off now, but I can add the exact error message later). In /etc/fstab I have: # ... (help info) ... # <file system> <mount point> <type> <options> <dump> <pass> # ... (mounting points that don't matter for the question) ... //192.168.1.2/C\:/Users/Public/Documents /srv/Z\:/ cifs user=guest,password=,uid=1000,iocharset=utf8 0 0 I also tried options such as username=guest,uid=1000,iocharset=utf8 and guest,uid=1000,iocharset=utf8, which, of course, don't work. What user am I supposed to use? (user=user; username=user; my credentials in the Windows and Ubuntu machines do not work, at least with the syntax I tried - similar to this). Even if this worked it's not actually what I want. I wanted to setup an authentication for any one trying to access the drive (it's currently 777, for the Linux share as well) and put a limit/quota on the share's use (as I see Z:on Windows, it allows for the entire C:drive to be filled). Thank you in advance. I'd be glad if you suggested a way to do this even without the last paragraph.

    Read the article

  • 2 folders in Sys/Class/Backlight?

    - by zebrapie
    ISSUE: Backlight brightness does not change. More Detail: Brightness will not change, using both 'System Settings-Screen', or FN keys (Brightness bar shows and moves, but screen brightness does not change). Notcied a post in this thread (http://ubuntuforums.org/showthread.php?t=1866283) about having multiple folders in Sys-Class-Backlight... I HAVE TWO FOLDERS TOO! 'intel_backlight' and 'acpi_video0' Using the function keys, alters the value in the acpi_video0's 'Brightness' file - But doesn't actually alter the brightness of the screen. If I add 'backlight=vendor' in Grub, my function keys then edit the value in the 'Intel_Backlight brightness file. - But again doesnt actually change the brightness of the screen. Computer: Fujitsu Siemans Pi2515, Intel Integrated Graphics, No hdd partition. Already Tried: -Editing grub to contain: acpi_osi=Linux acpi_backlight=vendor -http://ubuntuguide.net/change-screen-brightness-with-fn-key-in-ubuntu-11-0410-10 -sudo apt-get install acpi -$ sudo setpci -s 00:02.0 F4.B=20 -Brightness does not adjust in fallback mode either. -Reinstalling OS, Using Linux Mint (Same problem). -Upgrading and downgrading BIOS. Many thanks for reading, I understand this problem may need a bit of a Linux pro to sort. If anyones up for the challenge i'll spend any amount of time being walked through this, posting results. Don't want to give up here!

    Read the article

  • Is there a convenient method to pull files from a server in an SSH session?

    - by tel
    I often SSH into a cluster node for work and after processing want to pull several results back to my local machine for analysis. Typically, to do this I use a local shell to scp from the server, but this requires a lot of path manipulation. I'd prefer to use a syntax like interactive FTP and just 'pull' files from the server to my local pwd. Another possible solution might be to have some way to automatically set up my client computer as an ssh alias so that something like scp results home:~/results would work as expected. Is there any obscure SSH trick that'll do this for me? Working from grawity's answer, a complete solution in config files is something like local .ssh/config: Host ex HostName ssh.example.com RemoteForward 10101 localhost:22 ssh.example.com .ssh/config: Host home HostName localhost Port 10101 which lets me do commands exactly like scp results home: transferring the file results to my home machine.

    Read the article

  • How to forward http traffic through a specific network adapter.

    - by user18129
    i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

    Read the article

  • Is anyone else having issues with opening app links on iOS6 iPad3?

    - by lindon fox
    Links to ios apps (to the app store) are not working for me on my iPad 3/iOS 6. I thought it was my code causing the problem initially, but then I tried it on an iPhone, and an older iPad 2 and they both worked. I looked into it further and it seems no links are working (that I can find). I have googled, but I have not found anything yet. Is there anyone else having this problem? Example: link - this link will work on my computer and phone, but not on my iPad3 running iOS6 - it will just bring up the app store app showing the main screen.

    Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >