Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 487/509 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• Why can't we reach some (but not all) external web service via VPN connection?

  - by Paul Haldane

  At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

  Read the article

• Nginx Load Balancer 403 error

  - by user64473

  I am trying to install nginx as a load balancer with apache backends, so that when I point my sites to the nginx server it serves up the content from the apache backend. I have the apache configuration set up correctly on both (i.e when I go to the site on the apache servers it works great) but when I use the nginx load balancer as the site I get 403 error. I have no idea why as it isn't even accessing any files on the server, thusly there aren't any files to be forbidden access to. My virtual host is enabled and looks like this: upstream webs { server 10.0.0.30 weight=1; server 10.0.0.31 weight=1; } server { listen 80; server_name www.example.com example.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://webs; include /etc/nginx/proxy.conf; } } and my nginx.conf looks like this: user www-data; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffers 32 4k; } Can any geniuses out there tell me what I am doing wrong?

  Read the article

• Nginx config - serving index.html not working

  - by Bill

  I can't figure out how to redirect / to index.html. I've gone through the threads on serverfault and I think I've tried every suggestion including: rewrite statements within location / index index.html at the server level, within location / and within static content moving node.js proxy statements to location ~ /i instead of within location / Obviously something is wrong somewhere else in my configuration. Here is my nginx.conf: worker_processes 1; pid /home/logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; error_log /home/logs/error.log; access_log /home/logs/access.log combined; include sites-enabled/*; } and my server config located in sites-enabled server { root /home/www/public; listen 80; server_name localhost; # proxy request to node location / { index index.html index.htm; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://127.0.0.1:3010; proxy_redirect off; break; } # static content location ~ \.(?:ico|jpe?g|jpeg|gif|css|png|js|swf|xml|woff|eot|svg|ttf|html)$ { access_log off; add_header Pragma public; add_header Cache-Control public; expires 30d; } gzip on; gzip_vary on; gzip_http_version 1.0; gzip_comp_level 2; gzip_proxied any; gzip_min_length 1000; gzip_disable "msie6"; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; } Everything else is working just fine. Requests get proxied to node correctly and static content is served correctly. I just need to be able to forward requests made to / to /index.html.

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• unable to connect site to different port

  - by JohnMerlino

  I have a domain was registered at godaddy named http://mysite.com/. I logged into godaddy and I went to All Products Domains Domain Management. I clicked on the appropriate domain and it took me to the Domain Details page. I clicked Launch under DNS Manager and it took me to the Zone File Editor. I noticed that notify.mysite.com was pointing to an IP address pointing to a dead server, so I switched it to an operating server. Then I pinged the domain to see where it was pointing to and it was correctly pointing to the working server. So I copied the default configuration under sites-available: sudo cp default notify.mysite.com. And then I made some edits to it to have it point to a different document root to serve files at a different port: Listen 1740 Listen 64.135.xx.xxx:1740 #I also tried this as well: NameVirtualHost 64.135.xx.xxx:1740 <VirtualHost 64.135.xx.xxx:1740> ServerAdmin [email protected] ServerName notify.mysite.com DocumentRoot /var/www/test/public <Directory /var/www/test/public> Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Then I enabled the virtual host. Then I went to the document root and added an index.html file with some text in it. Then I restarted apache. The restart gave no errors. Then I type the correct domain in URL: http://notify.mysite.com:1740/ and I get: Oops! Google Chrome could not connect to notify.mysite.com:1740 Somehow it took out all my other sites. Now even the ones that were responding on port 80 are no longe responding, even though I did not touch the virtual hosts for them. I get this message now: Oops! Google Chrome could not connect to mysite.com However, ping responds: ping mysite.com PING mysite.com (64.135.12.134): 56 data bytes 64 bytes from 64.135.12.134: icmp_seq=0 ttl=49 time=20.839 ms 64 bytes from 64.135.12.134: icmp_seq=1 ttl=49 time=20.489 ms The result of telnet: $ telnet guarddoggps.com 80 Trying 64.135.12.134... telnet: connect to address 64.135.12.134: Connection refused telnet: Unable to connect to remote host

  Read the article

• RAILS : authlogic authenication / session error , "session contains objects whose class definition i

  - by Surya

  Session contains objects whose class definition isn\'t available. Remember to require the classes for all objects kept in the session I am trying to integrate http://github.com/binarylogic/authlogic for authentication into my rails application . I follwed all the steps into mentioned in the documentation . Now i seem to be getting this error when i hit a controller . Looks like i am missing something obvious . stacktrace /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:77:in `stale_session_check!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in `load!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in `[]' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:48:in `session_credentials' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:33:in `persist_by_session' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:93:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `each' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:276:in `run_callbacks' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/callbacks.rb:79:in `persist' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:55:in `persisting?' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:39:in `find' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:12:in `current_user_session' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:17:in `current_user' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:30:in `require_no_user' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:225:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:629:in `run_before_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:615:in `call_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in `perform_action_without_benchmark' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in `realtime' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in `perform_action_without_flash' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in `perform_action' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `send' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `process_without_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in `dispatch' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in `_call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in `build_middleware_stack' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in `call' /Users/suryagaddipati/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in `call'

  Read the article

• RAILS :"session contains objects whose class definition isn\'t available."

  - by Surya

  Session contains objects whose class definition isn\'t available. Remember to require the classes for all objects kept in the session I am trying to integrate http://github.com/binarylogic/authlogic for authentication into my rails application . I follwed all the steps into mentioned in the documentation . Now i seem to be getting this error when i hit a controller . Looks like i am missing something obvious . stacktrace /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:77:in `stale_session_check!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:61:in `load!' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/session/abstract_store.rb:28:in `[]' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:48:in `session_credentials' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/session.rb:33:in `persist_by_session' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:93:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `each' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:92:in `run' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:276:in `run_callbacks' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/callbacks.rb:79:in `persist' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:55:in `persisting?' /Library/Ruby/Gems/1.8/gems/authlogic-2.1.3/lib/authlogic/session/persistence.rb:39:in `find' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:12:in `current_user_session' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:17:in `current_user' /Users/suryagaddipati/myprojects/groceryplanner/app/controllers/application_controller.rb:30:in `require_no_user' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `send' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:178:in `evaluate_method' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/callbacks.rb:166:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:225:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:629:in `run_before_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:615:in `call_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in `perform_action_without_benchmark' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:10:in `realtime' /Library/Ruby/Gems/1.8/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_without_rescue' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in `perform_action_without_flash' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in `perform_action' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `send' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `process_without_filters' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in `process' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in `dispatch' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in `_call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in `build_middleware_stack' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in `cache' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in `call' /Library/Ruby/Gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' /Library/Ruby/Gems/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in `call' /Users/suryagaddipati/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in `call'

  Read the article

• Diagramming Software for a Developer/Designer

  - by Craig Walker

  For a long time I've been looking for a good diagramming/vector-based drawing program that meets my needs as a developer. I'd like to: Draw database diagrams Draw flow charts Draw object-modeling diagrams (UML being the standard) Draw other free-form diagrams (basically boxes & arrows with the occasional clipart) Draw mockups of user interfaces and web pages EDIT: I want good-looking electronic-format diagrams that I can show to 3rd parties, not just something for my own internal use. EDIT 2: I'm also looking for Windows software, although I'm toying with the idea of switching to Mac, so a really good Mac-only product might get me to switch. Basically I need a good vector graphic program (with decent grouping, connecting lines, and ideally auto-routing). I'd prefer a diagramming tool that can also be used for drawing (for the UI mockups) rather than a drawing tool that can also be used for diagrams. I've tried Visio on several occasions, and every time I've been disappointed. The interface always seems to get in my way at some point. It's pretty close to what I want, and the latest version (I got the trail from MS) seems to be better than previous ones in terms of usability, but I really don't want to plunk down that sort of cash for a mediocre product. I've tried Dia and Inkscape, and while initially promising and with the right price tag, I found both of them to be lacking in several ways (including some recurring bugs). I've toyed with getting Adobe Illustrator, but I've never used it before, and I have a feeling that it wouldn't handle the diagramming aspect very well, and I don't want to buy a copy just to find out it doesn't meet my needs. So far, the product that I've had the most success with is, sadly, OpenOffice Draw. It's free of course (which lowers my expectations and thus improves my view of it) and its usability is pretty good, but in the end I'd like something more suited to diagramming. I'm willing to spend real money (in the $500-$1K range) for a really good piece of software if it does everything I want it to. The front runner is of course Visio but I'm hoping for more. Does anybody have any recommendations? CONCLUSION: @dlamblin had the most informative post, but the part I gained the most from was his/her (and others) mention of OmniGraffle, not Gliffy. I gave Gliffy a try, and it seemed neet for occational use, but since it's a Flash app (note: not AJAX as dlamblin mentioned) it's still a bit of a pain to use (no keyboard shortcuts for copy/paste was pretty much a deal breaker for me). I also tried SmartDraw, but it had 3-strikes-you're-out against it: The trial period was only 7 days long. It used some nonstandard (and visually jarring) GUI widget toolkit for its UI. At the very least it makes me suspicious (how do I know it will actually work & support the standard Windows features?) It crashed on me early into my trial. OmniGraffle looks like exactly what I want... except that it's Mac-only (so I couldn't give it a try). However, it got good reviews from my Mac-owning coworker, and I hope to try it on a friend's Mac soon. If it's good enough then I might spring for a new MacBook.

  Read the article

• Error when pushing to Heroku - StatementInvalid - Ruby on Rails

  - by bgadoci

  I am trying to deploy my first rails app to Heroku and seem to be having a problem. After git push heroku master I get an error saying that relation "tags does not exist. I understand that without knowledge of my application it will be hard to help but I am wondering if someone can point me in the right direction. I have checked the schema.rb file and also been over all my migrations and there doesn't seem to be a problem there. The error message lead me to believe that I left something out of my routes.rb file but can't seem to find anything there either. Perhaps just some help deciphering this message. Processing PostsController#index (for 99.7.50.140 at 2010-04-21 12:28:59) [GET] ActiveRecord::StatementInvalid (PGError: ERROR: relation "tags" does not exist : SELECT a.attname, format_type(a.atttypid, a.atttypmod), d.adsrc, a.attnotnull FROM pg_attribute a LEFT JOIN pg_attrdef d ON a.attrelid = d.adrelid AND a.attnum = d.adnum WHERE a.attrelid = '"tags"'::regclass AND a.attnum > 0 AND NOT a.attisdropped ORDER BY a.attnum ): app/controllers/posts_controller.rb:9:in `index' /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' thin (1.0.1) lib/thin/connection.rb:80:in `pre_process' thin (1.0.1) lib/thin/connection.rb:78:in `catch' thin (1.0.1) lib/thin/connection.rb:78:in `pre_process' thin (1.0.1) lib/thin/connection.rb:57:in `process' thin (1.0.1) lib/thin/connection.rb:42:in `receive_data' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run_machine' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run' thin (1.0.1) lib/thin/backends/base.rb:57:in `start' thin (1.0.1) lib/thin/server.rb:150:in `start' thin (1.0.1) lib/thin/controllers/controller.rb:80:in `start' thin (1.0.1) lib/thin/runner.rb:173:in `send' thin (1.0.1) lib/thin/runner.rb:173:in `run_command' thin (1.0.1) lib/thin/runner.rb:139:in `run!' thin (1.0.1) bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 Also, here is my routes.rb file if that helps at all. ActionController::Routing::Routes.draw do |map| map.resources :ugtags map.resources :wysihat_files map.resources :users map.resources :votes map.resources :votes, :belongs_to => :user map.resources :tags, :belongs_to => :user map.resources :ugtags, :belongs_to => :user map.resources :posts, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :posts, :sessions map.resources :posts, :has_many => :comments map.resources :posts, :has_many => :tags map.resources :posts, :has_many => :ugtags map.resources :posts, :has_many => :votes map.resources :posts, :belongs_to => :user map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :ugtags, :collection => {:auto_complete_for_ugtag_ugctag_name => :get } map.login 'login', :controller => 'sessions', :action => 'new' map.logout 'logout', :controller => 'sessions', :action => 'destroy' map.root :controller => "posts" map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' end

  Read the article

• MVC Page not showing up, 404 not found

  - by mwright

  I have a very simple MVC site that is returning a 404 not found error when trying to load a page at the very beginning. I'm looking for some direction to troubleshoot this problem since there is really nothing to go on from the error message. The error I'm getting is: Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Views/Other/Index.aspx Below I have included the code for the various pieces, routing rules are default: routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional} // Parameter defaults ); The site is using nested MasterPages, not sure if this is involved with the problem but trying to include as much detail as possible. I have: Controllers OtherController Views: Shared Folder: Site.Master Other Folder: Other.Master Index.aspx Site.Master Code: <%@ Master Language="C#" Inherits="System.Web.Mvc.ViewMasterPage" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title> <asp:ContentPlaceHolder ID="TitleContent" runat="server" /> </title> </head> <body> <div> <asp:ContentPlaceHolder ID="MainContent" runat="server"> </asp:ContentPlaceHolder> </div> </body> </html> Other.Master Code: <%@ Master Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewMasterPage" %> <asp:Content ID="OtherTitle" ContentPlaceHolderID="TitleContent" runat="server"> OTHER PAGE - MASTER TITLE <asp:ContentPlaceHolder ID="OtherPageTitle" runat="server"> </asp:ContentPlaceHolder> </asp:Content> <asp:Content ID="OtherContent" ContentPlaceHolderID="MainContent" runat="server"> Some other content. <asp:ContentPlaceHolder ID="PageContent" runat="server"> </asp:ContentPlaceHolder> </asp:Content> Index.aspx Code: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Other/Other.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="IndexTitle" ContentPlaceHolderID="OtherTitle" runat="server"> Home </asp:Content> <asp:Content ID="IndexContent" ContentPlaceHolderID="OtherContent" runat="server"> Index content </asp:Content> OtherController Code namespace MVCProject.Controllers { public class OtherController : Controller { // // GET: /Member/ public ActionResult Index() { // Have also tried: // return View("Index", "Other.Master"); return View(); } } }

  Read the article

• Strange error with VS2008 on Windows 7

  - by Christian

  We have a solution with two projects, one of them is a Silverlight 3 application which is embedded on the other ASP.NET MVC project. Just recently an error started to appear which makes the build fail. Here is the output: `------ Build started: Project: DotCoquiMap, Configuration: Debug Any CPU ------ C:\Program Files\MSBuild\Microsoft\Silverlight\v3.0\Microsoft.Ria.Client.targets : warning : Could not find necessary input file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll'. Done building project "DotCoquiMap.csproj" -- FAILED. ------ Build started: Project: DotCoquiProject, Configuration: Debug Any CPU ------ C:\Windows\Microsoft.NET\Framework\v3.5\Csc.exe /noconfig /nowarn:1701,1702 /errorreport:prompt /warn:4 /define:DEBUG;TRACE /reference:C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll /reference:..\ExternalLibraries\itextsharp.dll /reference:..\ExternalLibraries\MvcMembership.dll /reference:..\ExternalLibraries\PagedList.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Configuration.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Core.dll" /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Data.DataSetExtensions.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Data.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Data.Linq.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Drawing.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.EnterpriseServices.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Web.Abstractions.dll" /reference:............\Windows\assembly\GAC_MSIL\System.Web.DataVisualization\3.5.0.0__31bf3856ad364e35\System.Web.DataVisualization.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Web.Extensions.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.Mobile.dll /reference:"C:\Program Files\Microsoft ASP.NET\ASP.NET MVC 1.0\Assemblies\System.Web.Mvc.dll" /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Web.Routing.dll" /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Web.Services.dll /reference:C:\Windows\Microsoft.NET\Framework\v2.0.50727\System.Xml.dll /reference:"C:\Program Files\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll" /debug+ /debug:full /optimize- /out:obj\Debug\DotCoquiProject.dll /target:library Controllers\AccountController.cs Controllers\AdministrationController.cs Controllers\ApiController.cs Controllers\CampaignsCategoriesController.cs Controllers\CampaignsController.cs Controllers\CampaignsFormViewModel.cs Controllers\CampaignStatisticsController.cs Controllers\CampaignStatisticsDetailsViewModel.cs Controllers\ControllerHelpers.cs Controllers\CountriesController.cs Controllers\ErrorController.cs Controllers\HomeController.cs Controllers\MapController.cs Controllers\MediaController.cs Controllers\MediaViewModel.cs Controllers\NewsController.cs Controllers\OrganizationsController.cs Controllers\OrgCenterController.cs Controllers\UserAdministrationController.cs Default.aspx.cs Global.asax.cs Models\Campaigns.cs Models\CategoriesRuleValidation.cs Models\DotCoquiDBModel.designer.cs Models\DotCoquiRepository.cs Models\DQcodes.cs Models\FileRepository.cs Models\ISmtpClient.cs Models\JsonModels.cs Models\OrgCenter\IndexViewModel.cs Models\SmtpClientProxy.cs Models\Statistic.cs Models\User.cs Models\UserAdministration\DetailsViewModel.cs Models\UserAdministration\IndexViewModel.cs Models\UserAdministration\RoleViewModel.cs Properties\AssemblyInfo.cs error CS0006: Metadata file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll' could not be found Compile complete -- 1 errors, 0 warnings ========== Build: 0 succeeded or up-to-date, 2 failed, 0 skipped ==========` And here is the errors / warnings: Warning 2 Could not find necessary input file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll'. DotCoquiMap Error 1 Metadata file 'C:\Users\Michael\Documents\DotCoqui\trunk\DotCoquiMap\Bin\Debug\DotCoquiMap.dll' could not be found DotCoquiProject The DotCoquiMap is not getting built therefore the DotCoquiProject (ASP.NET MVC) cannot find the .dll. Now here is the really odd thing, under Windows XP the very same code compiles and runs perfectly.... under windows 7 it gives us these errors. It is the very same code, we have tested it on 3 different Win7 machines to no avail. Help will be really really helpful. Thanks in advance.

  Read the article

• Aliasing a route causes rails to expect paths that don't exist

  - by DJTripleThreat

  ok here's some code: prompt>rails my_app prompt>cd my_app prompt>script/generate scaffold service_type title:string time_allotment:integer prompt>rake db:migrate then edit these files to look like this: #routes.rb: ActionController::Routing::Routes.draw do |map| map.resources :services, :controller => :service_types map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' end which produces these routes: prompt>rake routes services GET /services(.:format) {:controller=>"service_types", :action=>"index"} POST /services(.:format) {:controller=>"service_types", :action=>"create"} new_service GET /services/new(.:format) {:controller=>"service_types", :action=>"new"} edit_service GET /services/:id/edit(.:format) {:controller=>"service_types", :action=>"edit"} service GET /services/:id(.:format) {:controller=>"service_types", :action=>"show"} PUT /services/:id(.:format) {:controller=>"service_types", :action=>"update"} DELETE /services/:id(.:format) {:controller=>"service_types", :action=>"destroy"} /:controller/:action/:id /:controller/:action/:id(.:format) _ #my_app/app/views/service_types/index.html.erb <h1>Listing service_types</h1> <table> <tr> <th>Title</th> <th>Time allotment</th> </tr> <% @service_types.each do |service_type| %> <tr> <td><%=h service_type.title %></td> <td><%=h service_type.time_allotment %></td> <td><%= link_to 'Show', service_type %></td> <td><%= link_to 'Edit', edit_service_path(service_type) %></td> <td><%= link_to 'Destroy', service_type, :confirm => 'Are you sure?', :method => :delete %></td> </tr> <% end %> </table> <br /> <%= link_to 'New service_type', new_service_path %> - #my_app/app/views/service_types/new.html.erb <h1>New service_type</h1> <% form_for(@service_type) do |f| %> <%= f.error_messages %> <p> <%= f.label :title %><br /> <%= f.text_field :title %> </p> <p> <%= f.label :time_allotment %><br /> <%= f.text_field :time_allotment %> </p> <p> <%= f.submit 'Create' %> </p> <% end %> <%= link_to 'Back', services_path %> when you try to access http://localhost:3000/services/new you get the following error: undefined method `service_types_path' for #<ActionView::Base:0xb7199a80> Extracted source (around line #3): 1: <h1>New service_type</h1> 2: 3: <% form_for(@service_type) do |f| %> 4: <%= f.error_messages %> 5: 6: <p> Application Trace: /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/polymorphic_routes.rb:107:in `__send__' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/polymorphic_routes.rb:107:in `polymorphic_url' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_controller/polymorphic_routes.rb:114:in `polymorphic_path' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/form_helper.rb:298:in `apply_form_for_options!' /usr/lib/ruby/gems/1.8/gems/actionpack-2.3.5/lib/action_view/helpers/form_helper.rb:277:in `form_for' /home/aaron/NetBeansProjects/my_app/app/views/service_types/new.html.erb:3:in `_run_erb_app47views47service_types47new46html46erb' /home/aaron/NetBeansProjects/my_app/app/controllers/service_types_controller.rb:29:in `new' Anyone have any idea why it believes that service_types_path is in my code when it's not?

  Read the article

• Call an member function implementing the {{#linkTo ...}} helper from javascript code

  - by gonvaled

  I am trying to replace this navigation menu: <nav> {{#linkTo "nodes" }}<i class="icon-fixed-width icon-cloud icon-2x"></i>&nbsp;&nbsp;{{t generic.nodes}} {{grayOut "(temporal)"}}{{/linkTo}} {{#linkTo "services" }}<i class="icon-fixed-width icon-phone icon-2x"></i>&nbsp;&nbsp;{{t generic.services}}{{/linkTo}} {{#linkTo "agents" }}<i class="icon-fixed-width icon-headphones icon-2x"></i>&nbsp;&nbsp;{{t generic.agents}}{{/linkTo}} {{#linkTo "extensions" }}<i class="icon-fixed-width icon-random icon-2x"></i>&nbsp;&nbsp;{{t generic.extensions}}{{/linkTo}} {{#linkTo "voiceMenus" }}<i class="icon-fixed-width icon-sitemap icon-2x"></i>&nbsp;&nbsp;{{t generic.voicemenus}}{{/linkTo}} {{#linkTo "queues" }}<i class="icon-fixed-width icon-tasks icon-2x"></i>&nbsp;&nbsp;{{t generic.queues}}{{/linkTo}} {{#linkTo "contacts" }}<i class="icon-fixed-width icon-user icon-2x"></i>&nbsp;&nbsp;{{t generic.contacts}}{{/linkTo}} {{#linkTo "accounts" }}<i class="icon-fixed-width icon-building icon-2x"></i>&nbsp;&nbsp;{{t generic.accounts}}{{/linkTo}} {{#linkTo "locators" }}<i class="icon-fixed-width icon-phone-sign icon-2x"></i>&nbsp;&nbsp;{{t generic.locators}}{{/linkTo}} {{#linkTo "phonelocations" }}<i class="icon-fixed-width icon-globe icon-2x"></i>&nbsp;&nbsp;{{t generic.phonelocations}}{{/linkTo}} {{#linkTo "billing" }}<i class="icon-fixed-width icon-euro icon-2x"></i>&nbsp;&nbsp;{{t generic.billing}}{{/linkTo}} {{#linkTo "profile" }}<i class="icon-fixed-width icon-cogs icon-2x"></i>&nbsp;&nbsp;{{t generic.profile}}{{/linkTo}} {{#linkTo "audio" }}<i class="icon-fixed-width icon-music icon-2x"></i>&nbsp;&nbsp;{{t generic.audio}}{{/linkTo}} {{#linkTo "editor" }}<i class="icon-fixed-width icon-puzzle-piece icon-2x"></i>&nbsp;&nbsp;{{t generic.node_editor}}{{/linkTo}} </nav> With a more dynamic version. What I am trying to do is to reproduce the html inside Ember.View.render, but I would like to reuse as much Ember functionality as possible. Specifically, I would like to reuse the {{#linkTo ...}} helper, with two goals: Reuse existing html rendering implemented in the {{#linkTo ...}} helper Get the same routing support that using the {{#linkTo ...}} in a template provides. How can I call this helper from within javascript code? This is my first (incomplete) attempt. The template: {{view SettingsApp.NavigationView}} And the view: var trans = Ember.I18n.t; var MAIN_MENU = [ { 'linkTo' : 'nodes', 'i-class' : 'icon-cloud', 'txt' : trans('generic.nodes') }, { 'linkTo' : 'services', 'i-class' : 'icon-phone', 'txt' : trans('generic.services') }, ]; function getNavIcon (data) { var linkTo = data.linkTo, i_class = data['i-class'], txt = data.txt; var html = '<i class="icon-fixed-width icon-2x ' + i_class + '"></i>&nbsp;&nbsp;' + txt; return html; } SettingsApp.NavigationView = Ember.View.extend({ menu : MAIN_MENU, render: function(buffer) { for (var i=0, l=this.menu.length; i<l; i++) { var data = this.menu[i]; // TODO: call the ember function implementing the {{#linkTo ...}} helper buffer.push(getNavIcon(data)); } return buffer; } });

  Read the article

• Error When Loading Images on Local Host Test Server

  - by ke4ktz

  I have a peculiar problem that I just can't seem to find an explanation. I'm working on an AngularJS site for our family and am integrating data from various web services. Currently I am working on the photos section which will integrate in photos from our Flickr account. I have a main page which lists the various photo sets and displays the set's primary photo along with the title. (Note: I'm using the Flickr 'extras' parameter to return the primary photo's URL in the API calls.) <div data-ng-repeat="p in vm.photoSets"> <a ng-href="#/photos/{{p.id}}"> <img ng-src="{{p.primary_photo_extras.url_s}}"></img> </a> <h4>{{p.title._content}}</h4> </div> When clicking on the photo, the routing will display a page with a list of all the photos from that set, showing the image and the title. <div data-ng-repeat="p in vm.photoSetData.photo"> <a ng-href="#/photos/{{vm.photoSetId}}/{{p.id}}" <img ng-src="{{p.url_s}}"></img> </a> <h4>{{p.title}}</h4> </div> Now, here's where the problem is occuring. When I upload the code to my public website on my hosting provider, everything works just fine. Both pages display their respective photos. However, when I attempt to run the site on my local system, either in MAMP or NodeJS (using http-server), the second page gives me an error for each image: Error: [$interpolate:interr] Can't interpolate: {{p.url_s}} Error: [$sce:insecurl] Blocked loading resource from url not allowed by $sceDelegate policy. URL: https://farm1.staticflickr.com/37/82749767_e82ff60ce3_m.jpg http://errors.angularjs.org/1.2.9/$sce/insecurl?p0=https%3A%2F%2Ffarm1.staticflickr.com%2F37%2F82749767_e82ff60ce3_m.jpg http://errors.angularjs.org/1.2.9/$interpolate/interr?p0=%7B%7Bp.url_s%7D%7D&p1=Error%3A%20%5B%24sce%3Ainsecurl%5D%20Blocked%20loading%20resource%20from%20url%20not%20allowed%20by%20%24sceDelegate%20policy.%20%20URL%3A%20https%3A%2F%2Ffarm1.staticflickr.com%2F37%2F82749767_e82ff60ce3_m.jpg%0Ahttp%3A%2F%2Ferrors.angularjs.org%2F1.2.9%2F%24sce%2Finsecurl%3Fp0%3Dhttps%253A%252F%252Ffarm1.staticflickr.com%252F37%252F82749767_e82ff60ce3_m.jpg minErr/<@http://localhost/scripts/angular.js:78 $interpolate/fn@http://localhost/scripts/angular.js:8254 $RootScopeProvider/this.$get</Scope.prototype.$digest@http://localhost/scripts/angular.js:11800 $RootScopeProvider/this.$get</Scope.prototype.$apply@http://localhost/scripts/angular.js:12061 done@http://localhost/scripts/angular.js:7843 completeRequest@http://localhost/scripts/angular.js:8026 createHttpBackend/</jsonpDone<@http://localhost/scripts/angular.js:7942 jsonpReq/doneWrapper@http://localhost/scripts/angular.js:8039 jsonpReq/script.onerror@http://localhost/scripts/angular.js:8053 The API call to Flickr is successful and returns the correct data. In fact, the image title does display! I've tested it with Firefox, Safari and Chrome...all three browsers fail. I cannot find any explanation as to why it would work remotely but fail locally. Also, the images show up on the first page, but not on the second, even though one of the images on the second page is the same image URL as on the first page. Even going directly to the second page, bypassing the first page, still fails. Any ideas on how to fix this? It would be nice to test locally without having to upload to the server each time I make a change. Update: I have shut off the $sce security to see if that was causing the issue. Although it resulted in turning the error off, the files still don't load on the local test server. I have used the developer tools' network monitor and it doesn't even show an attempt to retrieve the files. AngularJS appears to shut down the retrieval, although the correct path shows up in the DOM.

  Read the article

• RackSpace Cloud Strips $_SESSION if URL Has Certain File Extensions

  - by macinjosh

  The Situation I am creating a video training site for a client on the RackSpace Cloud using the traditional LAMP stack (RackSpace's cloud has both Windows and LAMP stacks). The videos and other media files I'm serving on this site need to be protected as my client charges money for access to them. There is no DRM or funny business like that, essentially we store the files outside of the web root and use PHP to authenticate user's before they are able to access the files by using mod_rewrite to run the request through PHP. So let's say the user requests a file at this URL: http://www.example.com/uploads/preview_image/29.jpg I am using mod_rewrite to rewrite that url to: http://www.example.com/files.php?path=%2Fuploads%2Fpreview_image%2F29.jpg Here is a simplified version of the files.php script: <?php // Setups the environment and sets $logged_in // This part requires $_SESSION require_once('../../includes/user_config.php'); if (!$logged_in) { // Redirect non-authenticated users header('Location: login.php'); } // This user is authenticated, continue $content_type = "image/jpeg"; // getAbsolutePathForRequestedResource() takes // a Query Parameter called path and uses DB // lookups and some string manipulation to get // an absolute path. This part doesn't have // any bearing on the problem at hand $file_path = getAbsolutePathForRequestedResource($_GET['path']); // At this point $file_path looks something like // this: "/path/to/a/place/outside/the/webroot" if (file_exists($file_path) && !is_dir($file_path)) { header("Content-Type: $content_type"); header('Content-Length: ' . filesize($file_path)); echo file_get_contents($file_path); } else { header('HTTP/1.0 404 Not Found'); header('Status: 404 Not Found'); echo '404 Not Found'; } exit(); ?> The Problem Let me start by saying this works perfectly for me. On local test machines it works like a charm. However once deployed to the cloud it stops working. After some debugging it turns out that if a request to the cloud has certain file extensions like .JPG, .PNG, or .SWF (i.e. extensions of typically static media files.) the request is routed to a cache system called Varnish. The end result of this routing is that by the time this whole process makes it to my PHP script the session is not present. If I change the extension in the URL to .PHP or if I even add a query parameter Varnish is bypassed and the PHP script can get the session. No problem right? I'll just add a meaningless query parameter to my requests! Here is the rub: The media files I am serving through this system are being requested through compiled SWF files that I have zero control over. They are generated by third-party software and I have no hope of adding or changing the URLs that they request. Are there any other options I have on this? Update: I should note that I have verified this behavior with RackSpace support and they have said there is nothing they can do about it.

  Read the article

• Simple Detached pThread does not cancel! (cout blocks and interleaves even if mutexed)

  - by Gabriel

  I have a hard problem here, which I can not solve and do not find the right answer on the net: I have created a detached thread with a clean up routing, the problem is that on my Imac and Ubuntu 9.1 (Dual Core). I am not able to correctly cancel the detached thread in the fallowing code: #include <iostream> #include <pthread.h> #include <sched.h> #include <signal.h> #include <time.h> pthread_mutex_t mutex_t; using namespace std; static void cleanup(void *arg){ pthread_mutex_lock(&mutex_t); cout << " doing clean up"<<endl; pthread_mutex_unlock(&mutex_t); } static void *thread(void *aArgument) { pthread_setcancelstate(PTHREAD_CANCEL_ENABLE,NULL); pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED,NULL); pthread_cleanup_push(&cleanup,NULL); int n=0; while(1){ pthread_testcancel(); sched_yield(); n++; pthread_mutex_lock(&mutex_t); cout << " Thread 2: "<< n<<endl; pthread_mutex_unlock(&mutex_t); } pthread_cleanup_pop(0); return NULL; } int main() { pthread_t thread_id; pthread_attr_t attr; pthread_attr_init(&attr); pthread_attr_setdetachstate(&attr,PTHREAD_CREATE_DETACHED); int error; if (pthread_mutex_init(&mutex_t,NULL) != 0) return 1; if (pthread_create(&thread_id, &attr, &(thread) , NULL) != 0) return 1; pthread_mutex_lock(&mutex_t); cout << "waiting 1s for thread...\n" <<endl; pthread_mutex_unlock(&mutex_t); int n =0; while(n<1E3){ pthread_testcancel(); sched_yield(); n++; pthread_mutex_lock(&mutex_t); cout << " Thread 1: "<< n<<endl; pthread_mutex_unlock(&mutex_t); } pthread_mutex_lock(&mutex_t); cout << "canceling thread...\n" <<endl; pthread_mutex_unlock(&mutex_t); if (pthread_cancel(thread_id) == 0) { //This doesn't wait for the thread to exit pthread_mutex_lock(&mutex_t); cout << "detaching thread...\n"<<endl; pthread_mutex_unlock(&mutex_t); pthread_detach(thread_id); while (pthread_kill(thread_id,0)==0) { sched_yield(); } pthread_mutex_lock(&mutex_t); cout << "thread is canceled"; pthread_mutex_unlock(&mutex_t); } pthread_mutex_lock(&mutex_t); cout << "exit"<<endl; pthread_mutex_unlock(&mutex_t); return 0; } When I replace the Cout with printf() i workes to the end "exit" , but with the cout (even locked) the executable hangs after outputting "detaching thread... It would be very cool to know from a Pro, what the problem here is?. Why does this not work even when cout is locked by a mutex!? Thanks a lot for your support!!

  Read the article

• Receiving Multicast Messages on a Multihomed Windows PC

  - by Basti

  I'm developing a diagnostic tool on a PC with several Network Interfaces based on multicast/udp. The user can select a NIC, the application creates sockets, binds them to this NIC and adds them to the specific multicast group. The sending of multicast messages works fine. However receiving of messages only succeeds if I bind the sockets to a specific NIC of my PC. It almost looks like as there is a 'default' NIC for receiving multicast messages in Windows which is always the first NIC returned by the GetAdapterInfo function. I monitored the network with Wireshark and discovered that the "IGMP Join Group" message isn't sent from the NIC I bound the socket at, but by this 'default' NIC. If I disable this NIC (or remove the network cable), the next NIC of the list returned by GetAdapterInfo is used for receiving multicast messages. I was successful to change this 'default' NIC by adding an additional entry to the routing table of my PC, but I don't think this is a good solution of the problem. The problem also occurs with the code appended below. The join group messages isn't sent via 192.168.52 but via a different NIC. // socket_tst.cpp : Defines the entry point for the console application. // #include tchar.h #include winsock2.h #include ws2ipdef.h #include IpHlpApi.h #include IpTypes.h #include stdio.h int _tmain(int argc, _TCHAR* argv[]) { WSADATA m_wsaData; SOCKET m_socket; sockaddr_in m_sockAdr; UINT16 m_port = 319; u_long m_interfaceAdr = inet_addr("192.168.1.52"); u_long m_multicastAdr = inet_addr("224.0.0.107"); int returnValue = WSAStartup(MAKEWORD(2,2), &m_wsaData); if (returnValue != S_OK) { return returnValue; } // Create sockets if (INVALID_SOCKET == (m_socket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) ) { return WSAGetLastError(); } int doreuseaddress = TRUE; if (setsockopt(m_socket,SOL_SOCKET,SO_REUSEADDR,(char*) &doreuseaddress,sizeof(doreuseaddress)) == SOCKET_ERROR) { return WSAGetLastError(); } // Configure socket addresses memset(&m_sockAdr,0,sizeof(m_sockAdr)); m_sockAdr.sin_family = AF_INET; m_sockAdr.sin_port = htons(m_port); m_sockAdr.sin_addr.s_addr = m_interfaceAdr; //bind sockets if ( bind( m_socket, (SOCKADDR*) &m_sockAdr, sizeof(m_sockAdr) ) == SOCKET_ERROR ) { return WSAGetLastError(); } // join multicast struct ip_mreq_source imr; memset(&imr,0,sizeof(imr)); imr.imr_multiaddr.s_addr = m_multicastAdr; // address of multicastgroup imr.imr_sourceaddr.s_addr = 0; // sourceaddress (not used) imr.imr_interface.s_addr = m_interfaceAdr; // interface address /* first join multicast group, then registerer selected interface as * multicast sending interface */ if( setsockopt( m_socket ,IPPROTO_IP ,IP_ADD_MEMBERSHIP ,(char*) &imr , sizeof(imr)) == SOCKET_ERROR) { return SOCKET_ERROR; } else { if( setsockopt(m_socket ,IPPROTO_IP ,IP_MULTICAST_IF ,(CHAR*)&imr.imr_interface.s_addr ,sizeof(&imr.imr_interface.s_addr)) == SOCKET_ERROR ) { return SOCKET_ERROR; } } printf("receiving msgs...\n"); while(1) { // get inputbuffer from socket int sock_return = SOCKET_ERROR; sockaddr_in socketAddress; char buffer[1500]; int addressLength = sizeof(socketAddress); sock_return = recvfrom(m_socket, (char*) &buffer, 1500, 0, (SOCKADDR*)&socketAddress, &addressLength ); if( sock_return == SOCKET_ERROR) { int wsa_error = WSAGetLastError(); return wsa_error; } else { printf("got message!\n"); } } return 0; } Thanks four your help!

  Read the article

• Share a Printer on Your Network from Vista or XP to Windows 7

  - by Mysticgeek

  The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Share a Printer on Your Network from Vista or XP to Windows 7

  - by Mysticgeek

  The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• New Product: Oracle Java ME Embedded 3.2 – Small, Smart, Connected

  - by terrencebarr

  The Internet of Things (IoT) is coming. And, with todays launch of the Oracle Java ME Embedded 3.2 product, Java is going to play an even greater role in it. Java in the Internet of Things By all accounts, intelligent embedded devices are penetrating the world around us – driving industrial processes, monitoring environmental conditions, providing better health care, analyzing and processing data, and much more. And these devices are becoming increasingly connected, adding another dimension of utility. Welcome to the Internet of Things. As I blogged yesterday, this is a huge opportunity for the Java technology and ecosystem. To enable and utilize these billions of devices effectively you need a programming model, tools, and protocols which provide a feature-rich, consistent, scalable, manageable, and interoperable platform.  Java technology is ideally suited to address these technical and business problems, enabling you eliminate many of the typical challenges in designing embedded solutions. By using Java you can focus on building smarter, more valuable embedded solutions faster. To wit, Java technology is already powering around 10 billion devices worldwide. Delivering on this vision and accelerating the growth of embedded Java solutions, Oracle is today announcing a brand-new product: Oracle Java Micro Edition (ME) Embedded 3.2, accompanied by an update release of the Java ME Software Development Kit (SDK) to version 3.2. What is Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a complete Java runtime client, optimized for ARM architecture connected microcontrollers and other resource-constrained systems. The product provides dedicated embedded functionality and is targeted for low-power, limited memory devices requiring support for a range of network services and I/O interfaces.  What features and APIs are provided by Oracle Java ME Embedded 3.2? Oracle Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228). The runtime and virtual machine (VM) are highly optimized for embedded use. Also included in the product are the following optional JSRs and Oracle APIs: File I/O API’s (JSR-75)  Wireless Messaging API’s (JSR-120) Web Services (JSR-172) Security and Trust Services subset (JSR-177) Location API’s (JSR-179) XML API’s (JSR-280)  Device Access API Application Management System (AMS) API AccessPoint API Logging API Additional embedded features are: Remote application management system Support for continuous 24×7 operation Application monitoring, auto-start, and system recovery Application access to peripheral interfaces such as GPIO, I2C, SPIO, memory mapped I/O Application level logging framework, including option for remote logging Headless on-device debugging – source level Java application debugging over IP Connection Remote configuration of the Java VM What type of platforms are targeted by Oracle Java ME 3.2 Embedded? The product is designed for embedded, always-on, resource-constrained, headless (no graphics/no UI), connected (wired or wireless) devices with a variety of peripheral I/O.  The high-level system requirements are as follows: System based on ARM architecture SOCs Memory footprint (approximate) from 130 KB RAM/350KB ROM (for a minimal, customized configuration) to 700 KB RAM/1500 KB ROM (for the full, standard configuration)  Very simple embedded kernel, or a more capable embedded OS/RTOS At least one type of network connection (wired or wireless) The initial release of the product is delivered as a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN).  What types of applications can I develop with Oracle Java ME Embedded 3.2? The Oracle Java ME Embedded 3.2 product is a full-featured embedded Java runtime supporting applications based on the IMP-NG application model, which is derived from the well-known MIDP 2 application model. The runtime supports execution of multiple concurrent applications, remote application management, versatile connectivity, and a rich set of APIs and features relevant for embedded use cases, including the ability to interact with peripheral I/O directly from Java applications. This rich feature set, coupled with familiar and best-in class software development tools, allows developers to quickly build and deploy sophisticated embedded solutions for a wide range of use cases. Target markets well supported by Oracle Java ME Embedded 3.2 include wireless modules for M2M, industrial and building control, smart grid infrastructure, home automation, and environmental sensors and tracking. What tools are available for embedded application development for Oracle Java ME Embedded 3.2? Along with the release of Oracle Java ME Embedded 3.2, Oracle is also making available an updated version of the Java ME Software Development Kit (SDK), together with plug-ins for the NetBeans and Eclipse IDEs, to deliver a complete development environment for embedded application development.  OK – sounds great! Where can I find out more? And how do I get started? There is a complete set of information, data sheet, API documentation, “Getting Started Guide”, FAQ, and download links available: For an overview of Oracle Embeddable Java, see here. For the Oracle Java ME Embedded 3.2 press release, see here. For the Oracle Java ME Embedded 3.2 data sheet, see here. For the Oracle Java ME Embedded 3.2 landing page, see here. For the Oracle Java ME Embedded 3.2 documentation page, including a “Getting Started Guide” and FAQ, see here. For the Oracle Java ME SDK 3.2 landing and download page, see here. Finally, to ask more questions, please see the OTN “Java ME Embedded” forum To get started, grab the “Getting Started Guide” and download the Java ME SDK 3.2, which includes the Oracle Java ME Embedded 3.2 device emulation.  Can I learn more about Oracle Java ME Embedded 3.2 at JavaOne and/or Java Embedded @ JavaOne? Glad you asked Both conferences, JavaOne and Java Embedded @ JavaOne, will feature a host of content and information around the new Oracle Java ME Embedded 3.2 product, from technical and business sessions, to hands-on tutorials, and demos. Stay tuned, I will post details shortly. Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "Oracle Java ME Embedded", Connected, embedded, Embedded Java, Java Embedded @ JavaOne, JavaOne, Smart

  Read the article

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• First round playing with Memcached

  - by Shaun

  To be honest I have not been very interested in the caching before I’m going to a project which would be using the multi-site deployment and high connection and concurrency and very sensitive to the user experience. That means we must cache the output data for better performance. After looked for the Internet I finally focused on the Memcached. What’s the Memcached? I think the description on its main site gives us a very good and simple explanation. Free & open source, high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. Memcached is an in-memory key-value store for small chunks of arbitrary data (strings, objects) from results of database calls, API calls, or page rendering. Memcached is simple yet powerful. Its simple design promotes quick deployment, ease of development, and solves many problems facing large data caches. Its API is available for most popular languages. The original Memcached was built on *nix system are is being widely used in the PHP world. Although it’s not a problem to use the Memcached installed on *nix system there are some windows version available fortunately. Since we are WISC (Windows – IIS – SQL Server – C#, which on the opposite of LAMP) it would be much easier for us to use the Memcached on Windows rather than *nix. I’m using the Memcached Win X64 version provided by NorthScale. There are also the x86 version and other operation system version.   Install Memcached Unpack the Memcached file to a folder on the machine you want it to be installed, we can see that there are only 3 files and the main file should be the “memcached.exe”. Memcached would be run on the server as a service. To install the service just open a command windows and navigate to the folder which contains the “memcached.exe”, let’s say “C:\Memcached\”, and then type “memcached.exe -d install”. If you are using Windows Vista and Windows 7 system please be execute the command through the administrator role. Right-click the command item in the start menu and use “Run as Administrator”, otherwise the Memcached would not be able to be installed successfully. Once installed successful we can type “memcached.exe -d start” to launch the service. Now it’s ready to be used. The default port of Memcached is 11211 but you can change it through the command argument. You can find the help by typing “memcached -h”.   Using Memcached Memcahed has many good and ready-to-use providers for vary program language. After compared and reviewed I chose the Memcached Providers. It’s built based on another 3rd party Memcached client named enyim.com Memcached Client. The Memcached Providers is very simple to set/get the cached objects through the Memcached servers and easy to be configured through the application configuration file (aka web.config and app.config). Let’s create a console application for the demonstration and add the 3 DLL files from the package of the Memcached Providers to the project reference. Then we need to add the configuration for the Memcached server. Create an App.config file and firstly add the section on top of it. Here we need three sections: the section for Memcached Providers, for enyim.com Memcached client and the log4net. 1: <configSections> 2: <section name="cacheProvider" 3: type="MemcachedProviders.Cache.CacheProviderSection, MemcachedProviders" 4: allowDefinition="MachineToApplication" 5: restartOnExternalChanges="true"/> 6: <sectionGroup name="enyim.com"> 7: <section name="memcached" 8: type="Enyim.Caching.Configuration.MemcachedClientSection, Enyim.Caching"/> 9: </sectionGroup> 10: <section name="log4net" 11: type="log4net.Config.Log4NetConfigurationSectionHandler,log4net"/> 12: </configSections> Then we will add the configuration for 3 of them in the App.config file. The Memcached server information would be defined under the enyim.com section since it will be responsible for connect to the Memcached server. Assuming I installed the Memcached on two servers with the default port, the configuration would be like this. 1: <enyim.com> 2: <memcached> 3: <servers> 4: <!-- put your own server(s) here--> 5: <add address="192.168.0.149" port="11211"/> 6: <add address="10.10.20.67" port="11211"/> 7: </servers> 8: <socketPool minPoolSize="10" maxPoolSize="100" connectionTimeout="00:00:10" deadTimeout="00:02:00"/> 9: </memcached> 10: </enyim.com> Memcached supports the multi-deployment which means you can install the Memcached on the servers as many as you need. The protocol of the Memcached responsible for routing the cached objects into the proper server. So it’s very easy to scale-out your system by Memcached. And then define the Memcached Providers configuration. The defaultExpireTime indicates how long the objected cached in the Memcached would be expired, the default value is 2000 ms. 1: <cacheProvider defaultProvider="MemcachedCacheProvider"> 2: <providers> 3: <add name="MemcachedCacheProvider" 4: type="MemcachedProviders.Cache.MemcachedCacheProvider, MemcachedProviders" 5: keySuffix="_MySuffix_" 6: defaultExpireTime="2000"/> 7: </providers> 8: </cacheProvider> The last configuration would be the log4net. 1: <log4net> 2: <!-- Define some output appenders --> 3: <appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender"> 4: <layout type="log4net.Layout.PatternLayout"> 5: <conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline"/> 6: </layout> 7: </appender> 8: <!--<threshold value="OFF" />--> 9: <!-- Setup the root category, add the appenders and set the default priority --> 10: <root> 11: <priority value="WARN"/> 12: <appender-ref ref="ConsoleAppender"> 13: <filter type="log4net.Filter.LevelRangeFilter"> 14: <levelMin value="WARN"/> 15: <levelMax value="FATAL"/> 16: </filter> 17: </appender-ref> 18: </root> 19: </log4net>   Get, Set and Remove the Cached Objects Once we finished the configuration it would be very simple to consume the Memcached servers. The Memcached Providers gives us a static class named DistCache that can be used to operate the Memcached servers. Get<T>: Retrieve the cached object from the Memcached servers. If failed it will return null or the default value. Add: Add an object with a unique key into the Memcached servers. Assuming that we have an operation that retrieve the email from the name which is time consuming. This is the operation that should be cached. The method would be like this. I utilized Thread.Sleep to simulate the long-time operation. 1: static string GetEmailByNameSlowly(string name) 2: { 3: Thread.Sleep(2000); 4: return name + "@ethos.com.cn"; 5: } Then in the real retrieving method we will firstly check whether the name, email information had been searched previously and cached. If yes we will just return them from the Memcached, otherwise we will invoke the slowly method to retrieve it and then cached. 1: static string GetEmailByName(string name) 2: { 3: var email = DistCache.Get<string>(name); 4: if (string.IsNullOrEmpty(email)) 5: { 6: Console.WriteLine("==> The name/email not be in memcached so need slow loading. (name = {0})==>", name); 7: email = GetEmailByNameSlowly(name); 8: DistCache.Add(name, email); 9: } 10: else 11: { 12: Console.WriteLine("==> The name/email had been in memcached. (name = {0})==>", name); 13: } 14: return email; 15: } Finally let’s finished the calling method and execute. 1: static void Main(string[] args) 2: { 3: var name = string.Empty; 4: while (name != "q") 5: { 6: Console.Write("==> Please enter the name to find the email: "); 7: name = Console.ReadLine(); 8:  9: var email = GetEmailByName(name); 10: Console.WriteLine("==> The email of {0} is {1}.", name, email); 11: } 12: } The first time I entered “ziyanxu” it takes about 2 seconds to get the email since there’s nothing cached. But the next time I entered “ziyanxu” it returned very quickly from the Memcached.   Summary In this post I explained a bit on why we need cache, what’s Memcached and how to use it through the C# application. The example is fairly simple but hopefully demonstrated on how to use it. Memcached is very easy and simple to be used since it gives you the full opportunity to consider what, when and how to cache the objects. And when using Memcached you don’t need to consider the cache servers. The Memcached would be like a huge object pool in front of you. The next step I’m thinking now are: What kind of data should be cached? And how to determined the key? How to implement the cache as a layer on top of the business layer so that the application will not notice that the cache is there. How to implement the cache by AOP so that the business logic no need to consider the cache. I will investigate on them in the future and will share my thoughts and results.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Back to Basics: When does a .NET Assembly Dependency get loaded

  - by Rick Strahl

  When we work on typical day to day applications, it's easy to forget some of the core features of the .NET framework. For me personally it's been a long time since I've learned about some of the underlying CLR system level services even though I rely on them on a daily basis. I often think only about high level application constructs and/or high level framework functionality, but the low level stuff is often just taken for granted. Over the last week at DevConnections I had all sorts of low level discussions with other developers about the inner workings of this or that technology (especially in light of my Low Level ASP.NET Architecture talk and the Razor Hosting talk). One topic that came up a couple of times and ended up a point of confusion even amongst some seasoned developers (including some folks from Microsoft <snicker>) is when assemblies actually load into a .NET process. There are a number of different ways that assemblies are loaded in .NET. When you create a typical project assemblies usually come from: The Assembly reference list of the top level 'executable' project The Assembly references of referenced projects Dynamically loaded at runtime via AppDomain/Reflection loading In addition .NET automatically loads mscorlib (most of the System namespace) the boot process that hosts the .NET runtime in EXE apps, or some other kind of runtime hosting environment (runtime hosting in servers like IIS, SQL Server or COM Interop). In hosting environments the runtime host may also pre-load a bunch of assemblies on its own (for example the ASP.NET host requires all sorts of assemblies just to run itself, before ever routing into your user specific code). Assembly Loading The most obvious source of loaded assemblies is the top level application's assembly reference list. You can add assembly references to a top level application and those assembly references are then available to the application. In a nutshell, referenced assemblies are not immediately loaded - they are loaded on the fly as needed. So regardless of whether you have an assembly reference in a top level project, or a dependent assembly assemblies typically load on an as needed basis, unless explicitly loaded by user code. The same is true of dependent assemblies. To check this out I ran a simple test: I have a utility assembly Westwind.Utilities which is a general purpose library that can work in any type of project. Due to a couple of small requirements for encoding and a logging piece that allows logging Web content (dependency on HttpContext.Current) this utility library has a dependency on System.Web. Now System.Web is a pretty large assembly and generally you'd want to avoid adding it to a non-Web project if it can be helped. So I created a Console Application that loads my utility library: You can see that the top level Console app a reference to Westwind.Utilities and System.Data (beyond the core .NET libs). The Westwind.Utilities project on the other hand has quite a few dependencies including System.Web. I then add a main program that accesses only a simple utillity method in the Westwind.Utilities library that doesn't require any of the classes that access System.Web: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.ReadLine(); } StringUtils.NewStringId() calls into Westwind.Utilities, but it doesn't rely on System.Web. Any guesses what the assembly list looks like when I stop the code on the ReadLine() command? I'll wait here while you think about it… … … So, when I stop on ReadLine() and then fire up Process Explorer and check the assembly list I get: We can see here that .NET has not actually loaded any of the dependencies of the Westwind.Utilities assembly. Also not loaded is the top level System.Data reference even though it's in the dependent assembly list of the top level project. Since this particular function I called only uses core System functionality (contained in mscorlib) there's in fact nothing else loaded beyond the main application and my Westwind.Utilities assembly that contains the method accessed. None of the dependencies of Westwind.Utilities loaded. If you were to open the assembly in a disassembler like Reflector or ILSpy, you would however see all the compiled in dependencies. The referenced assemblies are in the dependency list and they are loadable, but they are not immediately loaded by the application. In other words the C# compiler and .NET linker are smart enough to figure out the dependencies based on the code that actually is referenced from your application and any dependencies cascading down into the dependencies from your top level application into the referenced assemblies. In the example above the usage requirement is pretty obvious since I'm only calling a single static method and then exiting the app, but in more complex applications these dependency relationships become very complicated - however it's all taken care of by the compiler and linker figuring out what types and members are actually referenced and including only those assemblies that are in fact referenced in your code or required by any of your dependencies. The good news here is: That if you are referencing an assembly that has a dependency on something like System.Web in a few places that are not actually accessed by any of your code or any dependent assembly code that you are calling, that assembly is never loaded into memory! Some Hosting Environments pre-load Assemblies The load behavior can vary however. In Console and desktop applications we have full control over assembly loading so we see the core CLR behavior. However other environments like ASP.NET for example will preload referenced assemblies explicitly as part of the startup process - primarily to minimize load conflicts. Specifically ASP.NET pre-loads all assemblies referenced in the assembly list and the /bin folder. So in Web applications it definitely pays to minimize your top level assemblies if they are not used. Understanding when Assemblies Load To clarify and see it actually happen what I described in the first example , let's look at a couple of other scenarios. To see assemblies loading at runtime in real time lets create a utility function to print out loaded assemblies to the console: public static void PrintAssemblies() { var assemblies = AppDomain.CurrentDomain.GetAssemblies(); foreach (var assembly in assemblies) { Console.WriteLine(assembly.GetName()); } } Now let's look at the first scenario where I have class method that references internally uses System.Web. In the first scenario lets add a method to my main program like this: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.ReadLine(); PrintAssemblies(); } public static void WebLogEntry() { var entry = new WebLogEntry(); entry.UpdateFromRequest(); Console.WriteLine(entry.QueryString); } UpdateFromWebRequest() internally accesses HttpContext.Current to read some information of the ASP.NET Request object so it clearly needs a reference System.Web to work. In this first example, the method that holds the calling code is never called, but exists as a static method that can potentially be called externally at some point. What do you think will happen here with the assembly loading? Will System.Web load in this example? No - it doesn't. Because the WebLogEntry() method is never called by the mainline application (or anywhere else) System.Web is not loaded. .NET dynamically loads assemblies as code that needs it is called. No code references the WebLogEntry() method and so System.Web is never loaded. Next, let's add the call to this method, which should trigger System.Web to be loaded because a dependency exists. Let's change the code to: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.WriteLine("--- Before:"); PrintAssemblies(); WebLogEntry(); Console.WriteLine("--- After:"); PrintAssemblies(); Console.ReadLine(); } public static void WebLogEntry() { var entry = new WebLogEntry(); entry.UpdateFromRequest(); Console.WriteLine(entry.QueryString); } Looking at the code now, when do you think System.Web will be loaded? Will the before list include it? Yup System.Web gets loaded, but only after it's actually referenced. In fact, just until before the call to UpdateFromRequest() System.Web is not loaded - it only loads when the method is actually called and requires the reference in the executing code. Moral of the Story So what have we learned - or maybe remembered again? Dependent Assembly References are not pre-loaded when an application starts (by default) Dependent Assemblies that are not referenced by executing code are never loaded Dependent Assemblies are just in time loaded when first referenced in code All of this is nothing new - .NET has always worked like this. But it's good to have a refresher now and then and go through the exercise of seeing it work in action. It's not one of those things we think about everyday, and as I found out last week, I couldn't remember exactly how it worked since it's been so long since I've learned about this. And apparently I'm not the only one as several other people I had discussions with in relation to loaded assemblies also didn't recall exactly what should happen or assumed incorrectly that just having a reference automatically loads the assembly. The moral of the story for me is: Trying at all costs to eliminate an assembly reference from a component is not quite as important as it's often made out to be. For example, the Westwind.Utilities module described above has a logging component, including a Web specific logging entry that supports pulling information from the active HTTP Context. Adding that feature requires a reference to System.Web. Should I worry about this in the scope of this library? Probably not, because if I don't use that one class of nearly a hundred, System.Web never gets pulled into the parent process. IOW, System.Web only loads when I use that specific feature and if I am, well I clearly have to be running in a Web environment anyway to use it realistically. The alternative would be considerably uglier: Pulling out the WebLogEntry class and sticking it into another assembly and breaking up the logging code. In this case - definitely not worth it. So, .NET definitely goes through some pretty nifty optimizations to ensure that it loads only what it needs and in most cases you can just rely on .NET to do the right thing. Sometimes though assembly loading can go wrong (especially when signed and versioned local assemblies are involved), but that's subject for a whole other post…© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  CSharp   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• L2TP connection fails!

  - by a.toraby

  I've installed l2tp-ipsec-vpn but when I try to connect to the vpn server I get error 500. Here are the logs: Jun 17 12:54:37.449 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:54:38.858 Stopping xl2tpd: xl2tpd. Jun 17 12:54:38.859 xl2tpd[1511]: death_handler: Fatal signal 15 received Jun 17 12:54:38.872 ipsec_setup: Starting Openswan IPsec U2.6.37/K3.2.0-23-generic... Jun 17 12:54:39.027 ipsec__plutorun: Starting Pluto subsystem... Jun 17 12:54:39.033 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Jun 17 12:54:39.037 recvref[30]: Protocol not available Jun 17 12:54:39.038 xl2tpd[2442]: This binary does not support kernel L2TP. Jun 17 12:54:39.038 xl2tpd[2444]: xl2tpd version xl2tpd-1.3.1 started on atp-ThinkPad-SL410 PID:2444 Jun 17 12:54:39.038 xl2tpd[2444]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. Jun 17 12:54:39.038 xl2tpd[2444]: Forked by Scott Balmos and David Stipp, (C) 2001 Jun 17 12:54:39.038 xl2tpd[2444]: Inherited by Jeff McAdams, (C) 2002 Jun 17 12:54:39.039 xl2tpd[2444]: Forked again by Xelerance (www.xelerance.com) (C) 2006 Jun 17 12:54:39.039 xl2tpd[2444]: Listening on IP address 0.0.0.0, port 1701 Jun 17 12:54:39.040 Starting xl2tpd: xl2tpd. Jun 17 12:54:39.062 ipsec__plutorun: 002 added connection description "L2TP" Jun 17 12:55:30.753 104 "L2TP" #1: STATE_MAIN_I1: initiate Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 20s for response Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 40s for response Jun 17 12:55:30.754 003 "L2TP" #1: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008] Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [RFC 3947] method set to=109 Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [FRAGMENTATION] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [IKE CGA version 1] Jun 17 12:55:30.755 106 "L2TP" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Jun 17 12:55:30.755 010 "L2TP" #1: STATE_MAIN_I2: retransmission; will wait 20s for response Jun 17 12:55:30.755 003 "L2TP" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Jun 17 12:55:30.755 108 "L2TP" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Jun 17 12:55:30.756 004 "L2TP" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Jun 17 12:55:30.756 117 "L2TP" #2: STATE_QUICK_I1: initiate Jun 17 12:55:30.756 010 "L2TP" #2: STATE_QUICK_I1: retransmission; will wait 20s for response Jun 17 12:55:30.756 003 "L2TP" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME msgid=6b03ff69 Jun 17 12:55:30.756 003 "L2TP" #2: NAT-Traversal: received 2 NAT-OA. ignored because peer is not NATed Jun 17 12:55:30.756 003 "L2TP" #2: our client subnet returned doesn't match my proposal - us:192.168.1.3/32 vs them:109.162.174.235/32 Jun 17 12:55:30.757 003 "L2TP" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL] Jun 17 12:55:30.757 004 "L2TP" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x23af21f8 <0xdb4a87b6 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Jun 17 12:55:31.759 xl2tpd[2444]: Connecting to host x.x.x.x, port 1701 Jun 17 12:55:32.021 xl2tpd[2444]: Connection established to x.x.x.x, 1701. Local: 4720, Remote: 200 (ref=0/0). Jun 17 12:55:32.023 xl2tpd[2444]: Calling on tunnel 4720 Jun 17 12:55:32.454 xl2tpd[2444]: Call established with x.x.x.x, Local: 9667, Remote: 3, Serial: 1 (ref=0/0) Jun 17 12:55:32.456 xl2tpd[2444]: start_pppd: I'm running: Jun 17 12:55:32.456 xl2tpd[2444]: "/usr/sbin/pppd" Jun 17 12:55:32.457 xl2tpd[2444]: "passive" Jun 17 12:55:32.458 xl2tpd[2444]: "nodetach" Jun 17 12:55:32.458 xl2tpd[2444]: ":" Jun 17 12:55:32.459 xl2tpd[2444]: "file" Jun 17 12:55:32.459 xl2tpd[2444]: "/etc/ppp/L2TP.options.xl2tpd" Jun 17 12:55:32.460 xl2tpd[2444]: "ipparam" Jun 17 12:55:32.461 xl2tpd[2444]: "x.x.x.x" Jun 17 12:55:32.462 xl2tpd[2444]: "/dev/pts/1" Jun 17 12:55:32.583 pppd[2711]: Plugin passprompt.so loaded. Jun 17 12:55:32.583 pppd[2711]: pppd 2.4.5 started by root, uid 0 Jun 17 12:55:32.619 pppd[2711]: Using interface ppp0 Jun 17 12:55:32.620 pppd[2711]: Connect: ppp0 <--> /dev/pts/1 Jun 17 12:55:33.693 pppd[2711]: /usr/bin/L2tpIPsecVpn exited with code 0 Jun 17 12:55:34.454 [ERROR 404] Authentication failed: closing connection to 'L2TP' Jun 17 12:55:34.456 pppd[2711]: MS-CHAP authentication failed: E=691 Authentication failure Jun 17 12:55:34.457 pppd[2711]: CHAP authentication failed Jun 17 12:55:34.461 Stopping xl2tpd: xl2tpd. Jun 17 12:55:34.462 xl2tpd[2444]: death_handler: Fatal signal 15 received Jun 17 12:55:34.463 pppd[2711]: Modem hangup Jun 17 12:55:34.463 pppd[2711]: Connection terminated. Jun 17 12:55:34.474 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:55:34.482 pppd[2711]: Exit. Jun 17 12:55:35.587 ipsec_setup: ERROR: Module xfrm4_mode_transport is in use Jun 17 12:55:35.665 ipsec_setup: ERROR: Module esp4 is in use I had this problem by ubuntu 11.10 though I can easily connect to the server from windows. I use ubuntu 12.0 64bit

  Read the article

• SQL SERVER – Advanced Data Quality Services with Melissa Data – Azure Data Market

  - by pinaldave

  There has been much fanfare over the new SQL Server 2012, and especially around its new companion product Data Quality Services (DQS). Among the many new features is the addition of this integrated knowledge-driven product that enables data stewards everywhere to profile, match, and cleanse data. In addition to the homegrown rules that data stewards can design and implement, there are also connectors to third party providers that are hosted in the Azure Datamarket marketplace.  In this review, I leverage SQL Server 2012 Data Quality Services, and proceed to subscribe to a third party data cleansing product through the Datamarket to showcase this unique capability. Crucial Questions For the purposes of the review, I used a database I had in an Excel spreadsheet with name and address information. Upon a cursory inspection, there are miscellaneous problems with these records; some addresses are missing ZIP codes, others missing a city, and some records are slightly misspelled or have unparsed suites. With DQS, I can easily add a knowledge base to help standardize my values, such as for state abbreviations. But how do I know that my address is correct? And if my address is not correct, what should it be corrected to? The answer lies in a third party knowledge base by the acknowledged USPS certified address accuracy experts at Melissa Data. Reference Data Services Within DQS there is a handy feature to actually add reference data from many different third-party Reference Data Services (RDS) vendors. DQS simplifies the processes of cleansing, standardizing, and enriching data through custom rules and through service providers from the Azure Datamarket. A quick jump over to the Datamarket site shows me that there are a handful of providers that offer data directly through Data Quality Services. Upon subscribing to these services, one can attach a DQS domain or composite domain (fields in a record) to a reference data service provider, and begin using it to cleanse, standardize, and enrich that data. Besides what I am looking for (address correction and enrichment), it is possible to subscribe to a host of other services including geocoding, IP address reference, phone checking and enrichment, as well as name parsing, standardization, and genderization.  These capabilities extend the data quality that DQS has natively by quite a bit. For my current address correction review, I needed to first sign up to a reference data provider on the Azure Data Market site. For this example, I used Melissa Data’s Address Check Service. They offer free one-month trials, so if you wish to follow along, or need to add address quality to your own data, I encourage you to sign up with them. Once I subscribed to the desired Reference Data Provider, I navigated my browser to the Account Keys within My Account to view the generated account key, which I then inserted into the DQS Client – Configuration under the Administration area. Step by Step to Guide That was all it took to hook in the subscribed provider -Melissa Data- directly to my DQS Client. The next step was for me to attach and map in my Reference Data from the newly acquired reference data provider, to a domain in my knowledge base. On the DQS Client home screen, I selected “New Knowledge Base” under Knowledge Base Management on the left-hand side of the home screen. Under New Knowledge Base, I typed a Name and description of my new knowledge base, then proceeded to the Domain Management screen. Here I established a series of domains (fields) and then linked them all together as a composite domain (record set). Using the Create Domain button, I created the following domains according to the fields in my incoming data: Name Address Suite City State Zip I added a Suite column in my domain because Melissa Data has the ability to return missing Suites based on last name or company. And that’s a great benefit of using these third party providers, as they have data that the data steward would not normally have access to. The bottom line is, with these third party data providers, I can actually improve my data. Next, I created a composite domain (fulladdress) and added the (field) domains into the composite domain. This essentially groups our address fields together in a record to facilitate the full address cleansing they perform. I then selected my newly created composite domain and under the Reference Data tab, added my third party reference data provider –Melissa Data’s Address Check- and mapped in each domain that I had to the provider’s Schema. Now that my composite domain has been married to the Reference Data service, I can take the newly published knowledge base and create a project to cleanse and enrich my data. My next task was to create a new Data Quality project, mapping in my data source and matching it to the appropriate domain column, and then kick off the verification process. It took just a few minutes with some progress indicators indicating that it was working. When the process concluded, there was a helpful set of tabs that place the response records into categories: suggested; new; invalid; corrected (automatically); and correct. Accepting the suggestions provided by  Melissa Data allowed me to clean up all the records and flag the invalid ones. It is very apparent that DQS makes address data quality simplistic for any IT professional. Final Note As I have shown, DQS makes data quality very easy. Within minutes I was able to set up a data cleansing and enrichment routine within my data quality project, and ensure that my address data was clean, verified, and standardized against real reference data. As reviewed here, it’s easy to see how both SQL Server 2012 and DQS work to take what used to require a highly skilled developer, and empower an average business or database person to consume external services and clean data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology Tagged: DQS

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >