Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 49/904 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • no way to use opendns on pppoe connection?

    - by magisterludi
    I have an old speedtouch usb modem (revision 0) and on my desktop with xubuntu 12.04 I've configured a pppoe connection. I can connect and my ISP assign an IP address and the DNS but the primary DNS address is not reachable by ping, the secondary yes but no address is resolved then I can't surf the web. Then I want to set the open DNS but there is bo way, if I change manually /etc/resolv.conf it is rewrited by some script (there is the flag usepeerdns on the configuration script, if I exclude it there is no way to assign any DNS server because resolv.conf is not read) also if I set not writable the file changing the default permission. I changed dhclient.conf with the code prepend domain-name-servers 208.67.222.222,208.67.220.220; and now if I connect by a wifi connection to my router I'm using openDNS server but ppp does not use this script as long as I can see and the DNS server is always setted by my ISP. How can I use set DNS manually to a PPP connection? Is there any way to change it after the connection? Why NetworkManager is not able to manage my dsl connection, it seems not able to manage the dsl usb cable modem. If I use pppoeconf NetworkManager doesn't start and I have to manually delete the lines added to /etc/network/interfaces because the system is not able to start with full configuration of network If I connect a modem-router to the same line I can surf with the DNS server assigned by my ISP, I can't figure why. Some suggestion? Thanks to all

    Read the article

  • OpenVpn is working but no internet connection

    - by user3636476
    I'm using an OpenVpn connection in Ubuntu, it's working well but when I'm using it, my internet connection is not working. I edited my connections in network manager, I've been to the VPN tab, and edited the VPN configuration. In the IPv4 Settings tab, I clicked in the bottom right button "Routes" and I ticked "Use this connection only for resources on its network". When I'm doing this the internet access is working but the vpn is not any help please?

    Read the article

  • Network icon shows an Internet connection, while ping does not

    - by mushfiq
    I am an Ubuntu user for the last couple of years. Recently facing problem to connect my new laptop into the Internet. I have an ISP connection which provide me a NAT address. I changed all the information in network configuration.The network icon shows it is connected to Internet but when I browse, ping shows no Internet connection. /etc/network/interfaces look like this: auto eth0 iface eth0 inet static address 192.168.100.118(put you internet address provided by the ISP) gateway 192.168.100.1(gateway address) netmask 255.255.255.0 network 192.168.100.0 And when I ping my DNS server IP get the reply from DNS server. I can not understand the problem,it should be mentioned that I also changed the Physical address of my laptop for using the existing connection. In windows the connection is working fine. Any suggestion in this question will help me a lot. Thanks in advance.

    Read the article

  • Connecting to an Amazon AWS database [closed]

    - by Adel
    so I'm a bit overwhelmed/bewildered by the whole concept of networking/remote-desktop , etc. The context is that - in my company I need to access a remote database. The standard way I use is to first connect using a VPN-Client( called Shrew Soft Access manager), then once that says: "network device configured tunnel enabled" I'm good to connect using windows "Remote Desktop Connection" . But now our company set up an Amazon AWS database, and I'm told I need to connect, and I ony need to use RDP. So I tried the standard windows one - but it doesn't work. On wikipedia , I looked up remote desktop sftware and downloaded one called VNC Viewer. but it doesn't work. Any advice/tips/comments appreciated EDIT: YAYA! I finally got a little more connected . I had to use my username as a fully qualified name: Computer: XYZ.XYZ.XYZ.XYZ USERNAME: XYZ.XYZ.XYZ.XYZ\aazzam

    Read the article

  • Thomson TG782T ADSL2+ modem loses network connection

    - by squashbuff
    I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

    Read the article

  • From the Coalface - 4 - Getting a connection string

    - by TATWORTH
    Creating a connection string by hand is quite difficult, however you create a connection string as follows: 1) Create an empty text file in windows explorer and rename it to X.UDL 2) Double click on it and the datalink provider dialog will appear. 3) Select the provider tab. Find the provider for your data access method and click next. 4) Select your source  5) Test the connection and save it. 6) Open X.UDL with a text editor to see your connections string. You can also look at http://www.connectionstrings.com/ for examples of connection strings.

    Read the article

  • Looking at desktop virtualization, but some users need 3D support. Is HP Remote Graphics a viable solution?

    - by Ryan Thompson
    My company is looking at desktop virtualization, and are planning to move all of the desktop compute resources into the server room or data center, and provide users with thin clients for access. In most cases, a simple VNC or Remote Desktop solution is adequate, but some users are running visualizations that require 3D capability--something that VNC and Remote Desktop cannot support. Rather than making an exception and providing desktop machines for these users, complicating out rollout and future operations, we are considering adding servers with GPUs, and using HP's Remote Graphics to provide access from the thin client. The demo version appears to work acceptably, but there is a bit of a learning curve, it's not clear how well it would work for multiple simultaneous sessions, and it's not clear if it would be a good solution to apply to non-3D sessions. If possible, as with the hardware, we want to deploy a single software solution instead of a mishmash. If anyone has had experience managing a large installation of HP Remote Graphics, I would appreciate any feedback you can provide.

    Read the article

  • How to deal with transactions when creating a database connection for each query

    - by webnoob
    In line with this post here I am going to change my website to create a connection per query to take advantage of .NET's connection pooling. With this in mind, I don't know how I should deal with transactions. At the moment I do something like (psuedo code): GlobalTransaction = GlobalDBConnection.BeginTransaction(); try { ExecSQL("insert into table ..") ExecSQL("update some_table ..") .... GlobalTransaction.Commit(); }catch{ GlobalTransaction.Rollback(); throw; } ExecSQL would be like this: using (SqlCommand Command = GlobalDBConnection.CreateCommand()) { Command.Connection = GlobalDBConnection; Command.Transaction = GlobalTransaction; Command.CommandText = SQLStr; Command.ExecuteNonQuery(); } I'm not quite sure how to change this concept to deal with transactions if the connection is created within ExecSQL because I would want the transaction to be shared between both the insert and update routines.

    Read the article

  • Test your internet connection - Emtel Fixed Broadband

    Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

    Read the article

  • FTP won't open a connection to client

    - by Ben
    I am running Windows server 2008 on Ubuntu server 12.04.1 via devstack and I am trying to download a file from an ftp server using the windows command line ftp client. When I run the ftp get command I get the following error message: 500 I won't open a connection to 10.0.0.2 (only to XX.XX.XX.XX) 425 No data connection 10.0.0.2 is the internal IP address of the instance, whereas XX.XX.XX.XX is the external address. Is there anyway to make the ftp client use the external address for the data connection, or alternatively have the client establish the connection? Thanks

    Read the article

  • Pooling (Singleton) Objects Against Connection Pools

    - by kolossus
    Given the following scenario A canned enterprise application that maintains its own connection pool A homegrown client application to the enterprise app. This app is built using Spring framework, with the DAO pattern While I may have a simplistic view of this, I think the following line of thinking is sound: Having a fixed pool of DAO objects, holding on to connection objects from the pool. Clearly, the pool should be capable of scaling up (or down depending on need) and the connection objects must outnumber the DAOs by a healthy margin. Good Instantiating brand new DAOs for every request to access the enterprise app; each DAO will attempt to grab a connection from the pool and release it when it's done. Bad Since these are service objects, there will be no (mutable) state held by the objects (reduced risk of concurrency issues) I also think that with #1, there should be little to no resource contention, while in #2, there'll almost always be a DAO waiting to be serviced. Is my thinking correct and what could go wrong?

    Read the article

  • How can I figure out my LDAP connection string?

    - by Allen
    We're on a corporate network thats running active directory and we'd like to test out some LDAP stuff (active directory membership provider, actually) and so far, none of us can figure out what our LDAP connection string is. Does anyone know how we can go about finding it? The only thing we know is the domain that we're on.

    Read the article

  • How to troubleshoot a remote wmi query/access failure?

    - by Roman
    Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

    Read the article

  • How to fix? => Your system administrator does not allow the user of saved credentials to log on to the remote computer

    - by Pure.Krome
    At our office, any of our Windows 7 Clients get this error message when we try and RDP to a remote W2K8 Server outside of the office :- Your system administrator does not allow the user of saved credentials to log on to the remote computer XXX because its identity is not fully verified. Please enter new credentials A quick google search leads to some posts they all suggest I edit group policy, etc. I'm under the impression, that the common fix for this, is to follow those instructions -per Windows7 machine-. Ack :( Is there anyway I can do something via our office Active Directory .. which auto updates all Windows 7 clients in the office LAN?

    Read the article

  • IP KVM switch, or serial console box for remote admin?

    - by grahzny
    We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

    Read the article

  • What's a good public access terminal solution using old PCs and remote VMs?

    - by greenfingers
    Has anyone had experience using VMs as remote desktops for public access terminals (e.g. an internet cafe) In our case we don't want to charge money for access but I figure this solution has a few advantages, such as: can easily re-build VMs daily, erasing private data and clutter can use rickety old PCs for the 'dumb' terminals less IT support needed on site Can you suggest tools to help do this? Keeping the terminals up and running as much of the time as possible is the main priority, so they need to boot straight into full screen remote desktop and stay there.

    Read the article

  • How to troubleshoot a remote wmi query/access failure?

    - by Roman
    I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

    Read the article

  • Apply Group Policy to Remote Desktop Services users but not when they log on to their local system

    - by Kevin Murray
    Running Windows Server 2008 Service Pack 2 with Remote Desktop Services role. I want to hide the servers drives using a GPO, but not the users local drives when they are logged on to their local system. Using a GPO, I went to "User Configuration - Policies - Administrative Template - Windows Components - Windows Explorer" and enabled "Hide these specified drives in My Computer" and "Prevent access to drives from My Computer" and in both used "Restrict all drives". Then under "Security Filtering" for the GPO, I restricted it to the system running Remote Desktop Services and the specific users who will be using RDS. I then applied the GPO to our domain and it worked a little too well. Not only was I successful in getting the GPO to work for RDS users, but it also affected those same users at their local systems as well. I've tried everything I can think of, but can't figure out how to apply this just to the RDS but not at their local system. What am I missing?

    Read the article

  • Is there anyway I can secure my connection when I try to log in to my router remotely?

    - by HardwareMuch
    I'm trying to configure my desktop to be accessed remotely. Here's what I've done so far: enabled wake on lan / remote wake up on all interfaces. I'm using logmein as my remote desktop application. setup DDNS so that I can log in to my router. When I try to remotely log in to my router it says that it is not encrypted there anyone can see my log in information. What can I do to make this a more secure setup? Any other suggestions or different methods will be greatly appreciated.

    Read the article

  • Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

    - by Jim Dagg
    I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >