version detection - Page 490

Convert old AVI files to a modern format

- by iWerner

Hi, we have a collection of old home videos that were saved in AVI format a long time ago. I want to convert these files to a more modern format because the Totem Movie Player that comes with Ubuntu 10.4 seems to be the only program capable of playing them. The files seem to be encoded with a MJPEG codec, and playing them in VLC or Windows Media Player plays only the sound but there is no video. Avidemux was able to open the files, but the quality of the video is severely degraded: The video skips frames and is interlaced (it's not interlaced when playing it in Totem). Neither ffmpeg nor mencoder seems to be able to read the video stream. mencoder reports that it is using ffmpeg's codec. Here's a section from its output: ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family [mjpeg @ 0x92a7260]mjpeg: using external huffman table [mjpeg @ 0x92a7260]mjpeg: error using external huffman table, switching back to internal Unsupported PixelFormat -1 Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG) while running ffmpeg produces the following: $ ffmpeg -i input.avi output.avi FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 4 2010 12:35:30, gcc: 4.4.3 [avi @ 0x87952c0]non-interleaved AVI Input #0, avi, from 'input.avi': Duration: 00:00:15.24, start: 0.000000, bitrate: 22447 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x544, 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 720x544, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 0 fps= 0 q=0.0 Lsize= 143kB time=15.23 bitrate= 76.9kbits/s video:0kB audio:119kB global headers:0kB muxing overhead 20.101777% So the problem is that output does not contain any video, as evidenced by the video:0kB at the end. In all of the above cases the audio comes out fine. So my question is: What can I do to convert these files to a more modern format with more modern codecs?

Read the article

SQL Script to Assign All Items to ALL Sites with Dynamics GP

- by Ryan McBee

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When setting up new items within Microsoft Dynamics GP, you will often run into the error message below which reads “This site is not assigned to the selected item. Do you want to assign this site?” The fix is quite simple given that you simply click the Add button below which opens up the Item Quantities Maintenance window which you will hit the save button and proceed with the entry of your Sales Order or Purchase Order. If you have a lot of new items into GP and have just one Site ID setup, the best approach to assigning your items to a particular site is by going to the Site Maintenance Window which is located in Cards>>Inventory>>Site. Once you are in the window below, you can click the Assign button to assign Items to the Site selected. However, if you have you a lot of Sites and Items created, this can be quite a cumbersome and time consuming process. For that, I have created the following SQL Script below that Assigns all Items to all Site ID’s within Microsoft Dynamics GP 2010. declare @item varchar(100) , @loc varchar(100) , @ItemExist int DECLARE TablePositionCursor CURSOR FOR SELECT itemnmbr from IV00101 i OPEN TablePositionCursor FETCH NEXT FROM TablePositionCursor INTO @item WHILE (@@fetch_status <> -1) BEGIN DECLARE TablePositionCursor2 CURSOR FOR select locncode from IV40700 OPEN TablePositionCursor2 FETCH NEXT FROM TablePositionCursor2 INTO @loc WHILE (@@fetch_status <> -1) BEGIN SELECT @ItemExist = isnull(count(*), 0) FROM IV00102 where ITEMNMBR = @item and LOCNCODE = @loc if @ItemExist = 0 BEGIN insert into iv00102 values( @item ,@loc ,'' ,2 ,'' ,0 ,0 ,0 ,0 ,'01/01/1900' ,'' ,'01/01/1900' ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,'01/01/1900' ,'01/01/1900' ,'01/01/1900' ,'01/01/1900' ,0 ,'' ,'' ,'' ,1 ,0 ,0 ,1 ,0 ,0 ,1 ,2 ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,1 ,0 ,0 ,0 ,3 ,0 ,0 ,0 ,'' ,'' ,'' ,'' ,'' ,'' ,'' ,'' ,1 ,1 ,'' ,1 ,1 ,0 ,1 ,1 ,1 ,0 ,0 ,0 ,0 ,0 ) END FETCH NEXT FROM TablePositionCursor2 INTO @loc END DEALLOCATE TablePositionCursor2 FETCH NEXT FROM TablePositionCursor INTO @item END DEALLOCATE TablePositionCursor The script below works just for GP 2010 since the columns in the IV00102 have changed from version to version. If you need it for prior versions, please email me and I will send it to you. Disclaimer: I tested this on limited data, if you find an issue or have a suggestion for improvement, please let me know and I will post the update here for everyone. This blog is provided "AS IS" with no warranties, and confers no rights.

Read the article

Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

- by Kellsey Ruppel

Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts. With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button. Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000 Challenges – Replace disparate medical service portals to meet future demands and eliminate an unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution – Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project. “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said. Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

Read the article

GLSL Shader Texture Performance

- by Austin

I currently have a project that renders OpenGL video using a vertex and fragment shader. The shaders work fine as-is, but in trying to add in texturing, I am running into performance issues and can't figure out why. Before adding texturing, my program ran just fine and loaded my CPU between 0%-4%. When adding texturing (specifically textures AND color -- noted by comment below), my CPU is 100% loaded. The only code I have added is the relevant texturing code to the shader, and the "glBindTexture()" calls to the rendering code. Here are my shaders and relevant rending code. Vertex Shader: #version 150 uniform mat4 mvMatrix; uniform mat4 mvpMatrix; uniform mat3 normalMatrix; uniform vec4 lightPosition; uniform float diffuseValue; layout(location = 0) in vec3 vertex; layout(location = 1) in vec3 color; layout(location = 2) in vec3 normal; layout(location = 3) in vec2 texCoord; smooth out VertData { vec3 color; vec3 normal; vec3 toLight; float diffuseValue; vec2 texCoord; } VertOut; void main(void) { gl_Position = mvpMatrix * vec4(vertex, 1.0); VertOut.normal = normalize(normalMatrix * normal); VertOut.toLight = normalize(vec3(mvMatrix * lightPosition - gl_Position)); VertOut.color = color; VertOut.diffuseValue = diffuseValue; VertOut.texCoord = texCoord; } Fragment Shader: #version 150 smooth in VertData { vec3 color; vec3 normal; vec3 toLight; float diffuseValue; vec2 texCoord; } VertIn; uniform sampler2D tex; layout(location = 0) out vec3 colorOut; void main(void) { float diffuseComp = max( dot(normalize(VertIn.normal), normalize(VertIn.toLight)) ), 0.0); vec4 color = texture2D(tex, VertIn.texCoord); colorOut = color.rgb * diffuseComp * VertIn.diffuseValue + color.rgb * (1 - VertIn.diffuseValue); // FOLLOWING LINE CAUSES PERFORMANCE ISSUES colorOut *= VertIn.color; } Relevant Rendering Code: // 3 textures have been successfully pre-loaded, and can be used // texture[0] is a 1x1 white texture to effectively turn off texturing glUseProgram(program); // Draw squares glBindTexture(GL_TEXTURE_2D, texture[1]); // Set attributes, uniforms, etc glDrawArrays(GL_QUADS, 0, 6*4); // Draw triangles glBindTexture(GL_TEXTURE_2D, texture[0]); // Set attributes, uniforms, etc glDrawArrays(GL_TRIANGLES, 0, 3*4); // Draw reference planes glBindTexture(GL_TEXTURE_2D, texture[0]); // Set attributes, uniforms, etc glDrawArrays(GL_LINES, 0, 4*81*2); // Draw terrain glBindTexture(GL_TEXTURE_2D, texture[2]); // Set attributes, uniforms, etc glDrawArrays(GL_TRIANGLES, 0, 501*501*6); // Release glBindTexture(GL_TEXTURE_2D, 0); glUseProgram(0); Any help is greatly appreciated!

Read the article

BizTalk Server 2013 beta on Windows 8 (with Visual Studio 2012, SQL Server 2012 & ESB Toolkit 2.2)

- by Vishal

Hello BizTalkers, Finally, Microsoft released the beta version of BizTalk Server 2010 R2 and now its called BizTalk Server 2013. I had tried the BTS 2010 R2 CTP version on Windows Azure VM and particularly I was excited about the RESTful services support and ESB fully integrated into BizTalk. Well didn’t get chance to test it much, Azure & VM running cost associated . Anyways, I was waiting for this announcement and I was so much glad that Microsoft finally released the on premise one. Check what’s new in the BizTalk Server 2013. Officially Microsoft says that BizTalk Server 2013 “beta” is not supported on Windows 8 but I was curious to try it out. Below is my installation and configuration experience. Virtual Machine configuration: VM Ware Workstation 9.0. Windows 8 Enterprise x64. SQL Server 2012. Visual Studio 2012 Ultimate. BizTalk Server 2013 beta. Windows 8 Machine name: WIN8 Local Administrator account name: Admin First I installed Windows 8 Enterprise on a VM Ware Workstation 9.0 and updated the OS. Even Windows 8 is the new release so luckily didn’t had much updates to perform. Next Installed Visual Studio 2012 Ultimate which was straightforward installation. Next Installed SQL Server 2012. Select New SQL Server stand-alone installation & followed the steps as shown in the screenshot below. Once the installation is finished, fire up SQL Server Management Studio and try connecting. Initially when the management studio opened up, I thought why did Visual Studio 2010 open when I tried opening SQL Management studio but well, they made the interface alike VS 2010. Cool, I like it. Next is the real deal, download the BizTalk Server 2013 and unzip to particular folder. Double click the Setup.exe and follow the steps in the screenshots. Install Microsoft BizTalk Server 2013 beta. I selected all the normal artifacts and also all the artifacts under Additional Software's. So far so good. Next Launch BizTalk Server Configuration and I used Basic configuration as shown in screenshot below. Didn’t expect to see this but “wala”. Successful in the first shot. Still I wasn’t sure & something would have gone wrong so fired up the BizTalk Server Administration Console and that too came up just fine. Still was not able to believe so created a simple messaging application: message in –> message out and that too worked just fine. Finally I was convinced that BizTalk Server 2013 did work on Windows 8. Next step was to install the ESB Toolkit 2.2 which is now integrated with BizTalk Server and does not come as a separate standalone installation file. Again run the BizTalk Setup.exe from the unzipped folder. Install Microsoft ESB Toolkit. Next, unlike ESB Configuration would not open up by itself so go to “Windows 8 so called Start” (I could not resist to write this) and open the ESB Toolkit Configuration wizard. Below screenshot display the configurations I used. Also you can find them on MSDN here. Finally after the ESB Configuration, I open Admin Console and checked the 2 ESB application deployed. Cool. This concludes my experience about installation and configuration of BizTalk Server 2013 Beta & ESB Toolkit 2.2 on Windows 8. I will try and keep writing about BizTalk Server 2013 and its use with RESTful Services etc. Thanks, Vishal Mody

Read the article

SQL SERVER – Importance of User Without Login

- by pinaldave

Some questions are very open ended and it is very hard to come up with exact requirements. Here is one question I was asked in recent User Group Meeting. Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Answer: Let us visualize a scenario. An application has lots of different operations and many of them are very sensitive operations. The common practice was to do give application specific role which has more permissions and access level. When a regular user login (not system admin), he/she might have very restrictive permissions. The application itself had a user name and password which means applications can directly login into the database and perform the operation. Developers were well aware of the username and password as it was embedded in the application. When developer leaves the organization or when the password was changed, the part of the application had to be changed where the same username and passwords were used. Additionally, developers were able to use the same username and password and login directly to the same application. In earlier version of SQL Server there were application roles. The same is later on replaced by “User without Login”. Now let us recreate the above scenario using this new “User without Login”. In this case, User will have to login using their own credentials into SQL Server. This means that the user who is logged in will have his/her own username and password. Once the login is done in SQL Server, the user will be able to use the application. Now the database should have another User without Login which has all the necessary permissions and rights to execute various operations. Now, Application will be able to execute the script by impersonating “user without login – with more permissions”. Here there is assumed that user login does not have enough permissions and another user (without login) there are more rights. If a user knows how the application is using the database and their various operations, he can switch the context to user without login making him enable for doing further modification. Make sure to explicitly DENY view definition permission on the database. This will make things further difficult for user as he will have to know exact details to get additional permissions. If a user is System Admin all the details which I just mentioned in above three paragraphs does not apply as admin always have access to everything. Additionally, the method describes above is just one of the architecture and if someone is attempting to damage the system, they will still be able to figure out a workaround. You will have to put further auditing and policy based management to prevent such incidents and accidents. I guess this is my answer. I read it multiple times but I still feel that I am missing something. There should be more to this concept than what I have just described. I have merely described one scenario but there will be many more scenarios where this situation will be useful. Now is your turn to help – please leave a comment with the additional suggestion where exactly “User without Login” will be useful as well did I miss anything when I described above scenario. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Opposite Force to Apply to a Collided Rigid Body?

- by Milo

I'm working on the physics for my GTA2-like game so I can learn more about game physics. The collision detection and resolution are working great. I'm now just unsure how to compute the force to apply to a body after it collides with a wall. My rigid body looks like this: /our simulation object class RigidBody extends Entity { //linear private Vector2D velocity = new Vector2D(); private Vector2D forces = new Vector2D(); private float mass; private Vector2D v = new Vector2D(); //angular private float angularVelocity; private float torque; private float inertia; //graphical private Vector2D halfSize = new Vector2D(); private Bitmap image; private Matrix mat = new Matrix(); private float[] Vector2Ds = new float[2]; private Vector2D tangent = new Vector2D(); private static Vector2D worldRelVec = new Vector2D(); private static Vector2D relWorldVec = new Vector2D(); private static Vector2D pointVelVec = new Vector2D(); private static Vector2D acceleration = new Vector2D(); public RigidBody() { //set these defaults so we don't get divide by zeros mass = 1.0f; inertia = 1.0f; setLayer(LAYER_OBJECTS); } protected void rectChanged() { if(getWorld() != null) { getWorld().updateDynamic(this); } } //intialize out parameters public void initialize(Vector2D halfSize, float mass, Bitmap bitmap) { //store physical parameters this.halfSize = halfSize; this.mass = mass; image = bitmap; inertia = (1.0f / 20.0f) * (halfSize.x * halfSize.x) * (halfSize.y * halfSize.y) * mass; RectF rect = new RectF(); float scalar = 10.0f; rect.left = (int)-halfSize.x * scalar; rect.top = (int)-halfSize.y * scalar; rect.right = rect.left + (int)(halfSize.x * 2.0f * scalar); rect.bottom = rect.top + (int)(halfSize.y * 2.0f * scalar); setRect(rect); } public void setLocation(Vector2D position, float angle) { getRect().set(position.x,position.y, getWidth(), getHeight(), angle); rectChanged(); } public Vector2D getPosition() { return getRect().getCenter(); } @Override public void update(float timeStep) { doUpdate(timeStep); } public void doUpdate(float timeStep) { //integrate physics //linear acceleration.x = forces.x / mass; acceleration.y = forces.y / mass; velocity.x += (acceleration.x * timeStep); velocity.y += (acceleration.y * timeStep); //velocity = Vector2D.add(velocity, Vector2D.scalarMultiply(acceleration, timeStep)); Vector2D c = getRect().getCenter(); v.x = getRect().getCenter().getX() + (velocity.x * timeStep); v.y = getRect().getCenter().getY() + (velocity.y * timeStep); setCenter(v.x, v.y); forces.x = 0; //clear forces forces.y = 0; //angular float angAcc = torque / inertia; angularVelocity += angAcc * timeStep; setAngle(getAngle() + angularVelocity * timeStep); torque = 0; //clear torque } //take a relative Vector2D and make it a world Vector2D public Vector2D relativeToWorld(Vector2D relative) { mat.reset(); Vector2Ds[0] = relative.x; Vector2Ds[1] = relative.y; mat.postRotate(JMath.radToDeg(getAngle())); mat.mapVectors(Vector2Ds); relWorldVec.x = Vector2Ds[0]; relWorldVec.y = Vector2Ds[1]; return relWorldVec; } //take a world Vector2D and make it a relative Vector2D public Vector2D worldToRelative(Vector2D world) { mat.reset(); Vector2Ds[0] = world.x; Vector2Ds[1] = world.y; mat.postRotate(JMath.radToDeg(-getAngle())); mat.mapVectors(Vector2Ds); worldRelVec.x = Vector2Ds[0]; worldRelVec.y = Vector2Ds[1]; return worldRelVec; } //velocity of a point on body public Vector2D pointVelocity(Vector2D worldOffset) { tangent.x = -worldOffset.y; tangent.y = worldOffset.x; pointVelVec.x = (tangent.x * angularVelocity) + velocity.x; pointVelVec.y = (tangent.y * angularVelocity) + velocity.y; return pointVelVec; } public void applyForce(Vector2D worldForce, Vector2D worldOffset) { //add linear force forces.x += worldForce.x; forces.y += worldForce.y; //add associated torque torque += Vector2D.cross(worldOffset, worldForce); } @Override public void draw( GraphicsContext c) { c.drawRotatedScaledBitmap(image, getPosition().x, getPosition().y, getWidth(), getHeight(), getAngle()); } public Vector2D getVelocity() { return velocity; } public void setVelocity(Vector2D velocity) { this.velocity = velocity; } } The way it is given force is by the applyForce method, this method considers angular torque. I'm just not sure how to come up with the vectors in the case where: RigidBody hits static entity RigidBody hits other RigidBody that may or may not be in motion. Would anyone know a way (without too complex math) that I could figure out the opposite force I need to apply to the car? I know the normal it is colliding with and how deep it collided. My main goal is so that say I hit a building from the side, well the car should not just stay there, it should slowly rotate out of it if I'm more than 45 degrees. Right now when I hit a wall I only change the velocity directly which does not consider angular force. Thanks!

Read the article

Second Day of Data Integration Track at OpenWorld 2012

- by Doug Reid

0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Our second day at OpenWorld and the Data Integration Team was very active with customer meetings, product updates, product demonstrations, sessions, plus much more. If the volume of traffic by our demo pods is any indicator, this is a record year for attendance at OpenWorld. The DIS team have had tremendous number of people stop by our demo pods to learn about the latest product releases or to speak to one of our product managers. For Oracle GoldenGate, there has been a great deal of interest in Integrated Capture and the Oracle GoldenGate Monitor plug-in for Enterprise Manager. Our customer panels this year have been very well attended and on Tuesday we held the “Real World Operational Reporting with Oracle GoldenGate Customer Panel”. On this panel this year we had Michael Wells from Raymond James, Joy Mathew and Venki Govindarajan from Comcast, and Serkan Karatas from Turk Telekom. Our panelists have a great mix of experiences and all are passionate about using Oracle Data Integration products to solve very complex use cases. Each panelist was given a ten minute to overview their use of our product, followed by a barrage of questions from the audience. Michael Wells spoke about using Oracle GoldenGate for heterogeneous real time replication from HP (Tandem) NonStop to SQL Server and emphasized the need for using standard naming conventions for when customers configure GoldenGate, as the practices is immensely helpful when debugging a problem. Joy Mathew and Venkat Govindarajan from Comcast described how they have used GoldenGate for over a decade and their experiences of using the product for replicating data from HP nonstop to Terdata. Serkan Karatas from Turk Telekom dove into using Oracle GoldenGate and the value of archiving data in extremely large databases, which in Turk Telekoms case resulted in a 1 month ROI for the entire project. Thanks again to our panelist and audience participants for making the session interactive and informative. For Wednesday we have a number of sessions available to attendees plus two hands-on labs, which I have listed below. If you are unable to attend our hands-on lab for Oracle GoldenGate Veridata, it is available online at youtube.com. Sessions 11:45 AM - 12:45 PM Best Practices for High Availability with Oracle GoldenGate on Oracle Exadata -Moscone South - 102 1:15 PM - 2:15 PM Customer Perspectives: Oracle Data Integrator -Marriott Marquis - Golden Gate C3 Oracle GoldenGate Case Study: Real-Time Operational Reporting Deployment at Oracle -Moscone West - 2003 Data Preparation and Ongoing Governance with the Oracle Enterprise Data Quality Platform -Moscone West - 3000 3:30 PM - 4:30 PM Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active -Moscone West - 3000 5:00 PM - 6:00 PM Tuning and Troubleshooting Oracle GoldenGate on Oracle Database -Moscone South - 102 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Hands-on Labs 10:15 AM - 11:15 AM Introduction to Oracle GoldenGate Veridata Marriott Marquis - Salon 1/2 11:45 AM - 12:45 PM Oracle Data Integrator and Oracle SOA Suite: Hands-on Lab -Marriott Marquis - Salon 1/2 If you are at OpenWorld please join us in these sessions. For a full review of data integration track at OpenWorld please see our Focus-On Document.

Read the article

Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

- by zewone

I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe

Read the article

Hardware wireless switch has no effect after suspend and 13.10 upgrade

- by blaineh

This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

Read the article

jtreg update, December 2012

- by jjg

There is a new version of jtreg available. The primary new feature is support for tests that have been written for use with TestNG, the popular open source testing framework. TestNG is supported by a variety of tools and plugins, which means that it is now possible to develop tests for OpenJDK using those tools, while still retaining the ability to have the tests be part of the OpenJDK test suite, and run with a single test harness, jtreg. jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg. TestNG support jtreg supports both single TestNG tests, which can be freely intermixed with other types of jtreg tests, and groups of TestNG tests. A single TestNG test class can be compiled and run by providing a test description using the new action tag: @run testng classname The test will be executed by using org.testng.TestNG. No main method is required. A group of TestNG tests organized in a standard package hierarchy can also be compiled and run by jtreg. Any such group must be identified by specifying the root directory of the package hierarchy. You can either do this in the top level TEST.ROOT file, or in a TEST.properties file in any subdirectory enclosing the group of tests. In either case, add a line to the file of the form: TestNG.dirs = dir ... Directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. In particular, note that you can simply use "TestNG.dirs = ." in a TEST.properties file in the root directory of the test group's package hierarchy. No additional test descriptions are necessary, but test descriptions containing information tags, such as @bug, @summary, etc are permitted. All the Java source files in the group will be compiled if necessary, before any of the tests in the group are run. The selected tests within the group will be run, one at a time, using org.testng.TestNG. Library classes The specification for the @library tag has been extended so that any paths beginning with '/' will be evaluated relative to the root directory of the test suite. In addition, some bugs have been fixed that prevented sharing the compiled versions of library classes between tests in different directories. Note: This has uncovered some issues in tests that use a combination of @build and @library tags, such that some tests may fail unexpectedly with ClassNotFoundException. The workaround for now is to ensure that library classes are listed before the test classes in any @build tags. To specify one or more library directories for a group of TestNG tests, add a line of the following form to the TEST.properties file in the root directory of the group's package hierarchy: lib.dirs = dir ... As before, directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. The libraries will be available to all classes in the group; you cannot specify different libraries for different tests within the group. Coming soon ... From this point on, jtreg development will be using the new jtreg repository in the OpenJDK code-tools project. There is a new email alias jtreg-dev at openjdk.java.net for discussions about jtreg development. The existing alias jtreg-use at openjdk.java.net will continue to be available for questions about using jtreg. For more information ... An updated version of the jtreg Tag Language Specification is being prepared, and will be made available when it is ready. In the meantime, you can find more information about the support for TestNG by executing the following command: $ jtreg -onlinehelp TestNG For more information on TestNG itself, visit testng.org.

Read the article

How views are changing in future versions of SQL

- by Rob Farley

April is here, and this weekend, SQL v11.0 (previous known as Denali, now known as SQL Server 2012) reaches general availability. And so I thought I’d share some news about what’s coming next. I didn’t hear this at the MVP Summit earlier this year (where there was lots of NDA information given, but I didn’t go), so I think I’m free to share it. I’ve written before about CTEs being query-scoped views. Well, the actual story goes a bit further, and will continue to develop in future versions. A CTE is a like a “temporary temporary view”, scoped to a single query. Due to globally-scoped temporary objects using a two-hashes naming style, and session-scoped (or ‘local’) temporary objects a one-hash naming style, this query-scoped temporary object uses a cunning zero-hash naming style. We see this implied in Books Online in the CREATE TABLE page, but as we know, temporary views are not yet supported in the SQL Server. However, in a breakaway from ANSI-SQL, Microsoft is moving towards consistency with their naming. We know that a CTE is a “common table expression” – this is proving to be a more strategic than you may have appreciated. Within the Microsoft product group, the term “Table Expression” is far more widely used than just CTEs. Anything that can be used in a FROM clause is referred to as a Table Expression, so long as it doesn’t actually store data (which would make it a Table, rather than a Table Expression). You can see this is not just restricted to the product group by doing an internet search for how the term is used without ‘common’. In the past, Books Online has referred to a view as a “virtual table” (but notice that there is no SQL 2012 version of this page). However, it was generally decided that “virtual table” was a poor name because it wasn’t completely accurate, and it’s typically accepted that virtualisation and SQL is frowned upon. That page I linked to says “or stored query”, which is slightly better, but when the SQL 2012 version of that page is actually published, the line will be changed to read: “A view is a stored table expression (STE)”. This change will be the first of many. During the SQL 2012 R2 release, the keyword VIEW will become deprecated (this will be SQL v11 SP1.5). Three versions later, in SQL 14.5, you will need to be in compatibility mode 140 to allow “CREATE VIEW” to work. Also consistent with Microsoft’s deprecation policy, the execution of any query that refers to an object created as a view (rather than the new “CREATE STE”), will cause a Deprecation Event to fire. This will all be in preparation for the introduction of Single-Column Table Expressions (to be introduced in SQL 17.3 SP6) which will finally shut up those people waiting for a decent implementation of Inline Scalar Functions. And of course, CTEs are “Common” because the Table Expression definition needs to be repeated over and over throughout a stored procedure. ...or so I think I heard at some point. Oh, and congratulations to all the new MVPs on this April 1st. @rob_farley

Read the article

Ti Launchpad

- by raysmithequip

Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now. Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself. That would of been the web expressions 4 I bought a few weeks back. With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd. No cd. I had already downloaded IAR another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit. Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity. But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box. The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI. It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit. Assembly. I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore. Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future. I may document the code here. Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob. For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat. Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored. If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

Read the article

Octree subdivision problem

- by ChaosDev

Im creating octree manually and want function for effectively divide all nodes and their subnodes - For example - I press button and subnodes divided - press again - all subnodes divided again. Must be like - 1 - 8 - 64. The problem is - i dont understand how organize recursive loops for that. OctreeNode in my unoptimized implementation contain pointers to subnodes(childs),parent,extra vector(contains dublicates of child),generation info and lots of information for drawing. class gOctreeNode { //necessary fields gOctreeNode* FrontBottomLeftNode; gOctreeNode* FrontBottomRightNode; gOctreeNode* FrontTopLeftNode; gOctreeNode* FrontTopRightNode; gOctreeNode* BackBottomLeftNode; gOctreeNode* BackBottomRightNode; gOctreeNode* BackTopLeftNode; gOctreeNode* BackTopRightNode; gOctreeNode* mParentNode; std::vector<gOctreeNode*> m_ChildsVector; UINT mGeneration; bool mSplitted; bool isSplitted(){return m_Splitted;} .... //unnecessary fields }; DivideNode of Octree class fill these fields, set mSplitted to true, and prepare for correctly drawing. Octree contains basic nodes(m_nodes). Basic node can be divided, but now I want recursivly divide already divided basic node with 8 subnodes. So I write this function. void DivideAllChildCells(int ix,int ih,int id) { std::vector<gOctreeNode*> nlist; std::vector<gOctreeNode*> dlist; int index = (ix * m_Height * m_Depth) + (ih * m_Depth) + (id * 1);//get index of specified node gOctreeNode* baseNode = m_nodes[index].get(); nlist.push_back(baseNode->FrontTopLeftNode); nlist.push_back(baseNode->FrontTopRightNode); nlist.push_back(baseNode->FrontBottomLeftNode); nlist.push_back(baseNode->FrontBottomRightNode); nlist.push_back(baseNode->BackBottomLeftNode); nlist.push_back(baseNode->BackBottomRightNode); nlist.push_back(baseNode->BackTopLeftNode); nlist.push_back(baseNode->BackTopRightNode); bool cont = true; UINT d = 0;//additional recursive loop param (?) UINT g = 0;//additional recursive loop param (?) LoopNodes(d,g,nlist,dlist); //Divide resulting nodes for(UINT i = 0; i < dlist.size(); i++) { DivideNode(dlist[i]); } } And now, back to the main question,I present LoopNodes, which must do all work for giving dlist nodes for splitting. void LoopNodes(UINT& od,UINT& og,std::vector<gOctreeNode*>& nlist,std::vector<gOctreeNode*>& dnodes) { //od++;//recursion depth bool f = false; //pass through childs for(UINT i = 0; i < 8; i++) { if(nlist[i]->isSplitted())//if node splitted and have childs { //pass forward through tree for(UINT j = 0; j < 8; j++) { nlist[j] = nlist[j]->m_ChildsVector[j];//set pointers to these childs } LoopNodes(od,og,nlist,dnodes); } else //if no childs { //add to split vector dnodes.push_back(nlist[i]); } } } This version of loop nodes works correctly for 2(or 1?) generations after - this will not divide neightbours nodes, only some corners. I need correct algorithm. Screenshot All I need - is correct version of LoopNodes, which can add all nodes for DivideNode.

Read the article

Is This Your Idea of Disaster Recovery?

- by rickramsey

Don't just make do with less. Protect what you've got. By, for instance, deploying Oracle Solaris 10 inside a zone cluster. "Wait," you say, "what is a zone cluster?" It is a zone deployed across different physical servers. "Who would do that!" you ask in a mild panic. Why, an upstanding sysadmin citizen interested in protecting his or her employer's investment with appropriate high availability and disaster recovery. If one server gets wiped out by Hurricane Sandy along with pretty much the entire East Coast of the USA, your zone continues to run on the other server(s). Provided you set them up in Edinburgh. This white paper (pdf) explains what a zone cluster is and how to use it. If a white paper reminds you of having to read War and Peace in school, just use this Oracle RAC and Solaris Cluster Cheat Sheet, instead. "But wait!" you exclaim. "I didn't realize Solaris 10 offered zone clusters!" I didn't, either! And in an earlier version of this blog post I said that zone clusters were only available with Oracle Solaris 11. But Karoly Vegh pointed me to the documentation for Oracle Solaris Cluster 3.3, which explains how to manage zone clusters in Oracle Solaris 10. Bite my fist! So, the point I was trying to make is not just that you can run Oracle Solaris 10 zone clusters, but that you can run them in an Oracle Solaris 11 environment. Now let's return to our conversation and pick up where we left off ... "Oh no! Whatever shall I do?" Fear not. Remember how Oracle Solaris 11 lets you create a Solaris 10 branded zone inside a system running Oracle Solaris 11? Well, the Solaris Cluster engineers thought that was a bang-up idea, and decided to extend Oracle Solaris Cluster so that you could run your Solaris 10 applications inside the protective cocoon of an Oracle Solaris 11 zone cluster. Take advantage of the installation improvements and network virtualization capabilities of Oracle Solaris 11 while still running your application on Oracle Solaris 10. You Luddite, you. That capability is in the latest release of Oracle Solaris Cluster, version 4.1, which became available last Friday. "Last Friday! Is it too late to get a copy?" You can still get a free copy from our download center (see below). And, if you'd like to know what other goodies the 4.1 release of Oracle Solaris Cluster provides, see: What's New In Oracle Solaris Cluster 4.1 (pdf) Free download Oracle Solaris Cluster 4.1 (SPARC or x86) Tech Article: How to Upgrade to Oracle Solaris Cluster 4.0, by Tim Read. As always, you can get the latest information about Oracle Solaris Cluster, plus technical how-to articles, documentation, and more from Oracle Solaris Cluster Resource Page for Sysadmins and Developers. And don't forget about the online launch of Oracle Solaris 11.1 and Oracle Solaris Cluster 4.1, scheduled for Nov 7. "I feel so much better, now!" Think nothing of it. That's what we're here for. - Rick Website Newsletter Facebook Twitter

Read the article

C++ OpenGL wireframe cube rendering blank

- by caleb.breckon

I'm just trying to draw a bunch of lines that make up a "cube". I can't for the life of me figure out why this is producing a black screen. The debugger does not break at any point. I'm sure it's a problem with my pointers, as I'm only decent at them in regular c++ and in OpenGL it gets even worse. const char* vertexSource = "#version 150\n" "in vec3 position;" "void main() {" " gl_Position = vec4(position, 1.0);" "}"; const char* fragmentSource = "#version 150\n" "out vec4 outColor;" "void main() {" " outColor = vec4(1.0, 1.0, 1.0, 1.0);" "}"; int main() { initializeGLFW(); // Initialize GLEW glewExperimental = GL_TRUE; glewInit(); // Create Vertex Array Object GLuint vao; glGenVertexArrays(1, &vao); glBindVertexArray(vao); // Create a Vertex Buffer Object and copy the vertex data to it GLuint vbo; glGenBuffers( 1, &vbo ); float vertices[] = { 1.0f, 1.0f, 1.0f, // Vertex 0 (X, Y, Z) -1.0f, 1.0f, 1.0f, // Vertex 1 (X, Y, Z) -1.0f, -1.0f, 1.0f, // Vertex 2 (X, Y, Z) 1.0f, -1.0f, 1.0f, // Vertex 3 (X, Y, Z) 1.0f, 1.0f, -1.0f, // Vertex 4 (X, Y, Z) -1.0f, 1.0f, -1.0f, // Vertex 5 (X, Y, Z) -1.0f, -1.0f, -1.0f, // Vertex 6 (X, Y, Z) 1.0f, -1.0f, -1.0f // Vertex 7 (X, Y, Z) }; GLuint indices[] = { 0, 1, 1, 2, 2, 3, 3, 0, 4, 5, 5, 6, 6, 7, 7, 4, 0, 4, 1, 5, 2, 6, 3, 7 }; glBindBuffer( GL_ARRAY_BUFFER, vbo ); glBufferData( GL_ARRAY_BUFFER, sizeof( vertices ), vertices, GL_STATIC_DRAW ); //glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vbo); //glBufferData( GL_ELEMENT_ARRAY_BUFFER, sizeof( indices ), indices, GL_STATIC_DRAW ); // Create and compile the vertex shader GLuint vertexShader = glCreateShader( GL_VERTEX_SHADER ); glShaderSource( vertexShader, 1, &vertexSource, NULL ); glCompileShader( vertexShader ); // Create and compile the fragment shader GLuint fragmentShader = glCreateShader( GL_FRAGMENT_SHADER ); glShaderSource( fragmentShader, 1, &fragmentSource, NULL ); glCompileShader( fragmentShader ); // Link the vertex and fragment shader into a shader program GLuint shaderProgram = glCreateProgram(); glAttachShader( shaderProgram, vertexShader ); glAttachShader( shaderProgram, fragmentShader ); glBindFragDataLocation( shaderProgram, 0, "outColor" ); glLinkProgram (shaderProgram); glUseProgram( shaderProgram); // Specify the layout of the vertex data GLint posAttrib = glGetAttribLocation( shaderProgram, "position" ); glEnableVertexAttribArray( posAttrib ); glVertexAttribPointer( posAttrib, 3, GL_FLOAT, GL_FALSE, 0, 0 ); // Main loop while(glfwGetWindowParam(GLFW_OPENED)) { // Clear the screen to black glClearColor( 0.0f, 0.0f, 0.0f, 1.0f ); glClear( GL_COLOR_BUFFER_BIT ); // Draw lines from 2 vertices glDrawElements(GL_LINES, sizeof(indices), GL_UNSIGNED_INT, indices ); // Swap buffers glfwSwapBuffers(); } // Clean up glDeleteProgram( shaderProgram ); glDeleteShader( fragmentShader ); glDeleteShader( vertexShader ); //glDeleteBuffers( 1, &ebo ); glDeleteBuffers( 1, &vbo ); glDeleteVertexArrays( 1, &vao ); glfwTerminate(); exit( EXIT_SUCCESS ); }

Read the article

Dell 3721 Wifi problem Ubuntu 13.04

- by Sebastian

I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

Read the article

Moving from Silverlight 4 Beta to RC - Part 1

The other day I had finished up my Task-It Webinar, written a few blog posts, and knew the time had come to move from my Silverlight 4 Beta environment up to the latest RC (release candidate) bits that were released last Monday. What disappointed me when I went to the Silverlight 4 Information Page is that it told me what to install, but not what to uninstall first. Uninstalling I'm not entirely sure if I had to uninstall anything, or if installing the new stuff would just work, but in poking around the web I found posts stating that you must uninstall the following items first. Unfortunately I'm going by memory here and have not been able to find my way back to the magic page I found in the myriad of posts that I went through: Microsoft VisualStudio Beta 2 Microsoft .NET Framework 4 Extended (apparently this must be done *before* the next one) Microsoft .NET Framework Client Profile Microsoft Silverlight 4 Tools for Visual Studio 2010 WCF RIA Services Preview for Visual Studio 2010 While I was at it, I removed a bunch of other stuff, like Blend 3, Blend 4, the SDK's associated with them, and a bunch other stuff that was old. Of course, I didn't really want/need to keep any Silverlight 3 stuff around as I am developing Task-It in Silverlight 4. If I need a Silverlight 3 environment at some point I'll set it up in a virtual environment. NOTE: One thing that I did not uninstall is the Microsoft Silverlight 4 Toolkit November 2009. The reason is that they have not released the March version yet, so if you uninstall this, youll end up having to reinstall it. Installing OK, now that I had all of that old stuff off my machine, now it was time to get the new stuff. For this part I liked Tim Heuer's post, A Guide to What has Changed in Silverlight 4 RC better than the Silverlight 4 Information Page. VisualStudio 2010 RC - I installed Ultimate, but you may not need that version. No harm, it's free for now anyway. I downloaded the .exe and the 3 .rar files, then ran the .exe. I then extracted the contents of the ISO (using WinZip) to a new directory, and now had Setup.exe, a bunch of .cab files and some other assorted stuff. I simply ran Setup.exe and chose custom install (only because I wanted to uncheck Visual C++...I don't really have a need for that) Silverlight 4 Tools for Visual Studio 2010 - As mentioned in Tim's blog post, this installs this installs Silverlight developer runtime, SDK, tools, and this installs Silverlight developer runtime, SDK, tools, and WCF RIA Services. WCF RIA Services Toolkit March 2010 - I'm not sure if/when I'll need any of this stuff, but no harm in installing it anyway. Expression Blend 4 beta - Only if you plan to use Blend, which I do. Windows Phone Developer Tools - Only if you are interested in playing with Windows Phone 7 development. Wrap Up Hopefully I got those steps right. If anyone finds anything I've missed, please just add a comment to this post and I'll update it accordingly.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Take Snapshots of Your Favorite Movie Scenes in VLC

- by DigitalGeekery

Have you ever wanted to grab a screenshot of your favorite TV or movie scene? Today we’ll show you how to do so with VLC Media Player. If you don’t have it already, download and install the latest version of VLC (link below). Start playing your movie, and to grab a snapshot, select Video from the menu and click Snapshot. When you take a snapshot, by default a preview is displayed at the top left and the folder where the file is saved is briefly displayed on the screen. If you enable the Advanced Controls, you can take a snapshot with a click of a button, and advance the video frame by frame to get a more accurate shot. To enable the Advanced Controls, select View and Advanced Controls. You’ll see the Advanced Controls buttons appear below the slider. Now just click on the Snapshot button to grab an image. You can more easily control the frame you wish to grab by pressing the Frame by Frame button. You can pause the movie when it is near the perfect spot for your snapshot, and then press the Frame by Frame button to advance a single frame at a time. By default, the snapshots are saved as PNG files in your My Pictures folder in Windows. You can change those setting in the Preferences. First, you’ll need to select All under Show settings at the bottom. Then click on Video on the left. Scroll down a bit and you’ll see the Snapshot section. Here you can change the format from PNG to JPG, change the directory to which the snapshots are stored, turn on and off the preview, and change the filename prefix. Click Save when finished. Now you have nice screenshots of your favorite movie to display as you wish…such as a Desktop Background! VLC is an excellent media player that runs on Windows, Mac, and Linux. In addition to playing almost any media file, it also makes grabbing screenshots of your videos a breeze. Want to know more about VLC? Check out some of our previous articles like how to rip DVDs and how to set a video as your desktop wallpaper. Download the Latest version of VLC Similar Articles Productive Geek Tips Desktop Fun: Rural Scenes WallpapersAutomatically Mount and View ISO files in Windows 7 Media CenterHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie LibraryQuickly Find Movies to Watch at Hello Movies TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

Read the article

Webcast Q&A: ResCare Solves Content Lifecycle Challenges with Oracle WebCenter

- by Kellsey Ruppel

Last week we had the fourth webcast in our WebCenter in Action webcast series, "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter", where customer Joe Lichtefeld from ResCare and Wayne Boerger & Doug Thompson from Oracle Partner TEAM Informatics shared how Oracle WebCenter is powering allowing ResCare to solve content lifecycle challenges, reduce compliance and business risks, and increase adoption of intranet as primary business communication tool In case you missed it, here's a recap of the Q&A. Joe Lichtefeld, ResCare Q: Did you run into any issues in the deployment of the platform?A: We experienced very few issues when implementing the content management and search functionalities. There were some challenges in determining the metadata structure. We tried to find a fine balance between having enough fields to provide the functionality needed, but trying to limit the impact to the contributing members. Q: What has been the biggest benefit your end users have seen?A: The biggest benefit to date is two-fold. Content on the intranet can be maintained by the individual contributors more timely than in our old process of all requests being updated by IT. The other big benefit is the ability to find the most current version of a document instead of relying on emails and phone calls to track down the "current" version. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: We experienced very little resistance. Most of our community groups were eager to be able to contribute and maintain their information. We had the normal hurdles of training and follow-up training with implementing a new system and process. As our second phase rolled out access to all employees, we have received more positive feedback on the accessibility of information. Wayne Boerger & Doug Thompson, TEAM Informatics Q: Can you integrate multiple repositories with the Google Search Appliance? Yes, the Google Search Appliance is designed to index lots of different repositories, from both public and internal sources. There are included connectors to many repositories, such as SharePoint, databases, file systems, LDAP, and with the TEAM GSA Connector and the Oracle Content Server. And the index for these repositories can be configured into different collections depending on the use cases that each customer has, and really, for each need within a customer environment. Q: How many different filters can you add when the search results are returned? A: Presuming this question is about the filtering on the search results. You can add as many filters as you like and it can be done by collection or any number of other criteria. Most importantly, customers now have the ability to limit the returned content by a set metadata value. Q: With the TEAM Sites Connector, what types of content can you sync? A: There’s really no limit; if it can be checked into the content server, then it is eligible for sync into Sites. So basically, any digital file that has relevance to a Sites implementation can be checked into the WC Content central repository and then the connector can/will manage it. Q: Using the Connector, are there any limitations around where in Sites that synced content can be used? A: There are no limitations about where it can be used. When setting up your environment to use it, you just need to think through the different destinations on the Sites side that might use the content; that way you’ve got the right information to create the rules needed for the connector. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action! ResCare Solves Content Lifecycle Challenges with Oracle WebCenter from Oracle WebCenter

Read the article

"previousMode": Controling the Pin Action of a TopComponent

- by Geertjan

An excellent thing I learned today is that you, as a developer of a NetBeans module or NetBeans Platform application, can control the pin button. Up until today, whenever I had a TopComponent defined to appear in "rightSlidingSide" mode and then I clicked the "pin" button, as shown here... ...the TopComponent would then find itself pinned in the "explorer" mode. Would make more sense if it would be pinned in the "properties" mode, which is the docked mode closest to the "rightSlidingSide" mode. Not being able to control the "pin" button has been a recurring question (including in my own head) over several years. But the NetBeans Team's window system guru Stan Aubrecht informed me today that a "previousMode" attribute exists in the "tc-ref" file of the TopComponent. Since a few releases, that file is generated via the annotations in the TopComponent. However, "previousMode" is currently not one of the attributes exposed by the @TopComponent.Registration annotation. Therefore, what I did was this: Set "rightSlidingSide" in the "mode" attribute of the @TopComponent.Registration. Build the module. Find the "generated-layer.xml" (in the Files window) and move the layer registration of the TopComponent, including its action and menu item for opening the TopComponent, into my own manual layer within the module. Then remove all the TopComponent annotations from the TopComponent, though you can keep @ConvertAsProperties and @Messages. Then add the "previousMode" attribute, as highlighted below, into my own layer file, i.e., within the tags copied from the "generated-layer.xml": <folder name="Modes"> <folder name="rightSlidingSide"> <file name="ComparatorTopComponent.wstcref"> <![CDATA[<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE tc-ref PUBLIC "-//NetBeans//DTD Top Component in Mode Properties 2.0//EN" "http://www.netbeans.org/dtds/tc-ref2_0.dtd"> <tc-ref version="2.0"> <tc-id id="ComparatorTopComponent"/> <state opened="false"/> <previousMode name="properties" index="0" /> </tc-ref> ]]> </file> </folder> </folder> Now when you run the application and pin the specific TopComponent defined above, i.e., in the above case, named "ComparatorTopComponent", you will find it is pinned into the "properties" mode! That's pretty cool and if you agree, then you're a pretty cool NetBeans Platform developer, and I'd love to find out more about the application/s you're creating on the NetBeans Platform! Meanwhile, I'm going to create an issue for exposing the "previousMode" attribute in the @TopComponent.Registration annotation.

Read the article

Utility to Script SQL Server Configuration

- by Bill Graziano

I wrote a small utility to script some key SQL Server configuration information. I had two goals for this utility: Assist with disaster recovery preparation Identify configuration changes I’ve released the application as open source through CodePlex. You can download it from CodePlex at the Script SQL Server Configuration project page. The application is a .NET 2.0 console application that uses SMO. It writes its output to a directory that you specify. Disaster Planning ScriptSqlConfig generates scripts for logins, jobs and linked servers. It writes the properties and configuration from the instance to text files. The scripts are designed so they can be run against a DR server in the case of a disaster. The properties and configuration will need to be manually compared. Each job is scripted to its own file. Each linked server is scripted to its own file. The linked servers don’t include the password if you use a SQL Server account to connect to the linked server. You’ll need to store those somewhere secure. All the logins are scripted to a single file. This file includes windows logins, SQL Server logins and any server role membership. The SQL Server logins are scripted with the correct SID and hashed passwords. This means that when you create the login it will automatically match up to the users in the database and have the correct password. This is the only script that I programmatically generate rather than using SMO. The SQL Server configuration and properties are scripted to text files. These will need to be manually reviewed in the event of a disaster. Or you could DIFF them with the configuration on the new server. Configuration Changes These scripts and files are all designed to be checked into a version control system. The scripts themselves don’t include any date specific information. In my environments I run this every night and check in the changes. I call the application once for each server and script each server to its own directory. The process will delete any existing files before writing new ones. This solved the problem I had where the scripts for deleted jobs and linked servers would continue to show up. To see any changes I just need to query the version control system to show many any changes to the files. Database Scripting Utilities that script database objects are plentiful. CodePlex has at least a dozen of them including one I wrote years ago. The code is so easy to write it’s hard not to include that functionality. This functionality wasn’t high on my list because it’s included in a database backup. Unless you specify the /nodb option, the utility will script out many user database objects. It will script one object per file. It will script tables, stored procedures, user-defined data types, views, triggers, table types and user-defined functions. I know there are more I need to add but haven’t gotten around it yet. If there’s something you need, please log an issue and get it added. Since it scripts one object per file these really aren’t appropriate to recreate an empty database. They are really good for checking into source control every night and then seeing what changed. I know everyone tells me all their database objects are in source control but a little extra insurance never hurts. Conclusion I hope this utility will help a few of you out there. My goal is to have it script all server objects that aren’t contained in user databases. This should help with configuration changes and especially disaster recovery.

Read the article

Texture errors in CubeMap

- by shade4159

I am trying to apply this texture as a cubemap. This is my result: Clearly I am doing something with my texture coordinates, but I cannot for the life of me figure out what. I don't even see a pattern to the texture fragments. They just seem like a jumble of different faces. Can anyone shed some light on this? Vertex shader: #version 400 in vec4 vPosition; in vec3 inTexCoord; smooth out vec3 texCoord; uniform mat4 projMatrix; void main() { texCoord = inTexCoord; gl_Position = projMatrix * vPosition; } My fragment shader: #version 400 smooth in vec3 texCoord; out vec4 fColor; uniform samplerCube textures void main() { fColor = texture(textures,texCoord); } Vertices of cube: point4 worldVerts[8] = { vec4( 15, 15, 15, 1 ), vec4( -15, 15, 15, 1 ), vec4( -15, 15, -15, 1 ), vec4( 15, 15, -15, 1 ), vec4( -15, -15, 15, 1 ), vec4( 15, -15, 15, 1 ), vec4( 15, -15, -15, 1 ), vec4( -15, -15, -15, 1 ) }; Cube rendering: void worldCube(point4* verts, int& Index, point4* points, vec3* texVerts) { quadInv( verts[0], verts[1], verts[2], verts[3], 1, Index, points, texVerts); quadInv( verts[6], verts[3], verts[2], verts[7], 2, Index, points, texVerts); quadInv( verts[4], verts[5], verts[6], verts[7], 3, Index, points, texVerts); quadInv( verts[4], verts[1], verts[0], verts[5], 4, Index, points, texVerts); quadInv( verts[5], verts[0], verts[3], verts[6], 5, Index, points, texVerts); quadInv( verts[4], verts[7], verts[2], verts[1], 6, Index, points, texVerts); } Backface function (since this is the inside of the cube): void quadInv( const point4& a, const point4& b, const point4& c, const point4& d , int& Index, point4* points, vec3* texVerts) { quad( a, d, c, b, Index, points, texVerts, a.to_3(), b.to_3(), c.to_3(), d.to_3()); } And the quad drawing function: void quad( const point4& a, const point4& b, const point4& c, const point4& d, int& Index, point4* points, vec3* texVerts, const vec3& tex_a, const vec3& tex_b, const vec3& tex_c, const vec3& tex_d) { texVerts[Index] = tex_a.normalized(); points[Index] = a; Index++; texVerts[Index] = tex_b.normalized(); points[Index] = b; Index++; texVerts[Index] = tex_c.normalized(); points[Index] = c; Index++; texVerts[Index] = tex_a.normalized(); points[Index] = a; Index++; texVerts[Index] = tex_c.normalized(); points[Index] = c; Index++; texVerts[Index] = tex_d.normalized(); points[Index] = d; Index++; } Edit: I forgot to mention, in the image, the camera is pointed directly at the back face of the cube. You can kind of see the diagonals leading out of the corners, if you squint.

Read the article

WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

- by el10780

After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

Read the article

Wireless cycling between connected and disconnected

- by Tony Kilgore

My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

Search Results

Search found 31206 results on 1249 pages for 'version detection'.

Page 490/1249 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497 | Next Page >

- by iWerner

- by Ryan McBee

- by Kellsey Ruppel

- by Austin

- by Vishal

- by pinaldave

- by Milo

- by Doug Reid

- by zewone

- by blaineh

- by jjg

- by Rob Farley

- by raysmithequip

- by ChaosDev

- by rickramsey

- by caleb.breckon

- by Sebastian

- by DigitalGeekery

- by Kellsey Ruppel

- by Geertjan

- by Bill Graziano

- by shade4159

- by el10780

- by Tony Kilgore

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497 | Next Page >