Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 491/757 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

• Why does the CPU usage reach 100% when laptop is plugged in?

  - by Mayank

  I have an HP Elitebook 8440p with Windows 7 Ultimate, i7 Processor and 8 GB RAM. For the last couple of days, when I plug-in my laptop for charging, the CPU usage shoots up to 100% and remains there for around 15 minutes. No offending process shows up in Task Manager/Process Explorer but the laptop is practically unusable for that time. The CPU usage becomes normal when I remove the power cord but shoots up again when plugged back. This is happening with different power adapters/wall sockets so it might not be a faulty adapter issue. Why is this happening and any pointer to resolve this issue?

  Read the article

• How do I make a partition usable in windows 7 after power loss?

  - by user1306322

  A few days ago I was installing some software and power went down. When I rebooted, the partition to which the software was installed was not accessible. Disk manager shows that it's there, but doesn't show type, if it's healthy and gives me an error when trying to read its properties. The problem seems to be common after power loss, people recommend solving it by assigning a letter to the partition via DiskPart utility, but partition isn't listed in my case. I can access that partition with bootable OSs (like bootable Ubuntu or winXP) and all the files are there, but another installation of Windows 7 gives me the same results as the original. I could just copy all data to another disk if there was enough space, but unfortunately the size of partition I'm having problems with is 1.1TB. How do I regain access to the partition in my original Windows 7 installation without losing any data?

  Read the article

• Unable to copy and paste (or cut and paste) photos already reduced in size from Word document into a

  - by Simon Child

  Hello I cannot copy photos and paste them from a word document into the text of an email on my Sony Laptop having already substantially redcued the size of the photos using Microsoft Office Picture Manager. I can readily manage to perform this functjon from my work place PC but am presently working mostly from home. I am trying to email photos and text using a btinternet.com email address but have checked that I cannot perform the task using my alternate googlemail email address either. I can obviously highlight the relevant photographs but whenever I try to copy or cut them into the email text the paste function is disabled. Assistance would be much appreciated. Kind regards Simon

  Read the article

• Possible to use DRBD on two ESXi virtualized servers?

  - by chen

  I have two servers (attached disks have been set up as hardware RAID1 for disk device level failure resilience). Here is the setup in my mind: 1) Install ESXi on each of the physical server, M1, M2; 2) Start one VM on each of the ESXi virtualized physical server V1, V2; 3) Install the DRDB drivers within V1 and V2. Essentially, this is a "virtualizing machine running DRBD in the VM's instead of bare metal hardware" idea. My question is whether the above setup can achieve the same "networked RAID1" goal that DRDB can achieve in the bare-metal physical machines (http://www.drbd.org/). Thanks. [EDIT] I found this (http://serverfault.com/questions/49305/drbd-experimentation-and-virtualization) is a similar question, but the answer does not seem to be firmative enough for me to follow.

  Read the article

• Offline installer for .net 3.5 sp1 not working

  - by Tim Tom

  I download a big file of .Net 3.5 SP1 from http://download.microsoft.com/download/2/0/e/20e90413-712f-438c-988e-fdaa79a8ac3d/dotnetfx35.exe Now when I try to install it on Windows Server 2012, I get the following screenshot: What the?? When will the microsoft learn? Now this is a loop. When I try to install from Server Manager, I get installation cannot be done. It needs installation disk. Does that mean I can't install at all without the installation disk in presence?

  Read the article

• Remap arrow keys to win+ijkl on linux

  - by Pengin

  I'd like to remap arrow keys to windows key plus ijkl. I can do this easily in Autohotkey on windows, but I'm struggling on Linux (Ubuntu lucid). I'd really like the solution to work independently of whether I'm using a window manager or not, and to involve modifying as few files as possible; I work on a lots of different machines and am always building new ones, so would like to minimise reconfig effort. I've tried to understand .Xmodmap, but couldn't make it work (was hard to find detailed docs on modifier keys). (Am also considering win+hjkl, but am probably not that hardcore)

  Read the article

• Jumbo Frames, ISCSI and ESXi

  - by vlannoob

  I have enabled Jumbo Frames (9000) in ESXi for all my vmNICs, vmKernels, vSwitches, iSCSI Bindings etc - basically anywhere in ESXi where it has an MTU settings I have put 9000 in it. The ports on the switches (Dell PowerConnects) are all set for Jumbo Frames. I have a Dell MD3200i with 2 controllers, each with 4 ports for iSCSI. Each of these ports is set to Jumbo Frames (9000) as well. So now the questions: Do I need to log into each Windows Server VM I am running and delve into the NIC properties and manually set it to Jumbo Frames in the NIC properties in the device Manager as well? Whats the best way of testing that Jumbo Frames are indeed working as intended?

  Read the article

• some keyboard keys not working properly

  - by surfmadpig

  I'm using Windows 7. All of a sudden, a couple of hours ago, this happened: My keyboard number keys [above the letters] stopped working properly, both as numbers and as symbols. Only 5 and 6 are functional. Also, I've noticed that the End key isn't working either, and perhaps a couple more from that group. I'm pretty sure it has something to do with those evil Sticky Keys/Filter Keys/ whatever those ease of access things are, BUT I've turned off all the ease of access keyboard options and nothing has changed. Is it possible that something is still turned on while I unchecked it? Are the on/off checkboxes to control WHEN it happens or IF it happens? I also tried rebooting and uninstalling/reinstalling keyboard from device manager, to no avail. It's certainly a software issue and not a hardware issue, as I've tried another keyboard and the problem persists. And, predictably enough, it's annoying. Any ideas?

  Read the article

• Windows (7 & Vista) laptop monitor does not come back after closing lid

  - by Scott Vercuski

  I'm experiencing an issue with Windows Vista (and now Windows 7) with my laptop. When I close the laptop lid the monitor goes blank but will not come back on after I re-open the laptop. The screen stays blank and nothing that I do will get it to come back. The laptop is an HP DV9000 series. Has anyone else ran into this issue? One of the solutions I've seen online is to go into the device manager and replace the lid driver with something nonsensical (the website suggested pointing the driver at the sound recorder). This does solve the problem by disabling the lid but doesn't really resolve the root issue. I'm asking if anyone has any method I can use to debug what's going on. How do I tell if it is an operating system issue vs. a malfunction within the lid itself. I'd actually like the lid to function as it's meant to. Thank you!

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Windows 8 Start Screen: Show programs in order of most frequently used

  - by Johnny W

  For me the Windows 8 Start Screen is just a great bit version of the old Start Menu, but unlike the Start Menu, it doesn't seem to order programs by frequency of use? Consider the following: While I DO use Chrome, Steam, and iTunes a lot. I've never ran Adobe Media Encoder, nor Adobe Extension Manager, nor Acrobat Distiller, or indeed most of the things on that list! Or there a way to change sorting to most frequently clicked on? Or perhaps even create FOLDERS in which to group items (e.g. "Adobe Apps" or "Games" or "Microsoft Office"?). Dragging them one at a time takes an age!

  Read the article

• Cisco redundancy modes

  - by user974896

  I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

  Read the article

• Windows XP, USB-Stick and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• USB forwarding from dom0 to domU

  - by Karolis T.

  What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

  Read the article

• OMG. Is Webmin safe? I can see file codes in Chrome browser without login

  - by Arwana

  When Im in File Manager of Webmin, I can double click and see the codes of the files in new tab in Firefox with its specific URL. But when I remove ?rand=xxxx... after the file.php and paste the URL in Chrome browser, I still can see the codes. This is the URL I just pasted in the Chrome browser http://xxx.xxx.xxx.xxx:10000/file/show.cgi/var/www/html/mysite.com/files/file.php And then, I logout of webmin, and I change the file.php with other file, I can see the codes. OMG. Is Webmin safe? and how to secure this?

  Read the article

• How to find spyware dll launched using svchost.exe

  - by Sheen

  This weekend I found my PC was possibly infected by some virus or spyware. There is one "svchost.exe -k netsvcs" in my task manager, and it is running under my user name, rather than SYSTEM accounts. There is already another same process with same command line options under SYSTEM account. This user account svchost.exe consistently consumes 50% CPU (1 of 2 cores of my CPU). In Process Explorer, I can see it is started by explorer.exe, instead of services.exe. However, I failed to find its real service dll place in registry or disk. Does anyone know how to find this malicious program?

  Read the article

• Finding spoofed IP address on network

  - by Jared

  I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

  Read the article

• Problems with webcame

  - by Murtaza

  My friends is using windows 8.1 and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged that that webcam and windows detected it and installed drivers automatically. Then I opened Skype for checking webcam. I got massage on top of Skype that "your webcam has microphone" when I clicked over it, it directed me to sound settings where I microphone of webcam was working. I went to videos settings but webcam wasn't listed their. As you can see in image. Webcam is listed in device manager but isn't listed in Skype. I am also using windows 7 professional. Any idea why it is happening?

  Read the article

• Multicasting Windows 7 Image

  - by LawnChairSkank

  I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

• Enabling the Power State Change Beep

  - by digitxp

  I have a Thinkpad T430s. I found on other Thinkpads there's a beep when you plug or unplug the AC cord. While I hear a lot of people say it's annoying it seems like a very useful security feature. However, when I go into the Power Manager the option to beep on plugging/unplugging ("Power State Change Beep") isn't there, even though it's in the help file already. I know it would be easy to rig a software solution to this event, but it would kind of defeat the purpose if it doesn't beep when it's in sleep. Is there a way to get this beep on my laptop?

  Read the article

• What causes random clicking/navigation sound while PC is idle?

  - by user14339

  On my Dell D630 laptop running Windows XP Pro SP3, I randomly hear the "Windows Navigation Start.wav" played. This happens even if the only application active on the PC at the time is Microsoft Outlook and no one is touching the keyboard or touchpad. The start navigation sound IS enabled for Internet Explorer (I have IE 7 installed), but it is not running (no window open, anyway). The clicks are rapid, as if being executed automatically by a script or process, and they always come in threes: "click-click, click". I don't see any changes on the display and I don't know how to figure out what's running that could cause this. I have tried to leave Windows Task Manager open in the hope that I'll see a process name jump to the top of the list briefly, but it doesn't happen that often and I guess I'm not quick enough. The PC is slower than I think it should be, but System Idle Process is at 96 - 99 during the event, and for most of the time when I'm not actually using the machine. Any ideas?

  Read the article

• Problem accessing MICROSOFT##SSEE database (Error: 18456, Severity: 14, State: 16.)

  - by Philipp Schmid

  After an unexpected server shutdown due to a power failure, I can no longer connect to the internal windows database MICROSOFT##SSEE which is hosting Central Admin for my SBS 2008 server. The log shows: Error: 18456, Severity: 14, State: 16. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. [CLIENT: <named pipe>] I've tried to connect using the SQL Management studio (connecting to .pipemssql$microsoft##sseesqlquery) but no luck. The SQL Server Configuration Manager doesn't show a entry for 'Protocols for MICROSOFT##SSEE' (but shows it for 2 other database hosted on the same SQL server 2005 Express edition. I have tried to restore the master.ldf and mastlog.log files from a backup, but the issue persists.

  Read the article

• Help, I need to debug my BrowserHelperObject (BHO) (in C++) after a internet explorer 8 crash in Rel

  - by BHOdevelopper

  Hi, here is the situation, i'm developping a Browser Helper Object (BHO) in C++ with Visual Studio 2008, and i learned that the memory wasn't managed the same way in Debug mode than in Release mode. So when i run my BHO in debug mode, internet explorer 8 works just fine and i got no erros at all, the browser stays alive forever, but as soon as i compile it in release mode, i got no errors, no message, nothing, but after 5 minutes i can see through the task manager that internet explorer instances are just eating memory and then the browser just stop responding every time. Please, I really need some hint on how to get a feedback on what could be the error. I heard that, often it was happening because of memory mismanagement. I need a software that just grab a memory dump or something when iexplorer crashes to help me find the problem. Any help is appreciated, I'll be looking for responses every single days, thank you.

  Read the article

• Is there an FTP client for Windows 7 with a text-based UI? (not text-prompt based, like ftp.exe)

  - by Alan B

  Is there such as thing as a text-mode FTP client for Windows 7 ? By 'text-mode' I mean one that runs in a CMD.EXE window as opposed to a Windows GUI application. It also needs to be something along the lines of FileZilla, i.e. menu-driven as opposed to command-entry clients like NcFTP or indeed the built-in one. edit: To avoid confusion, what I mean is an application similar to that pictured (ZTreeWin File Manager), which runs from CMD.EXE and uses text characters for its UI, within the CMD.EXE window. The built-in FTP client, and things like NcFTP offer a prompt at which you issue commands. That's not what I'm looking for.

  Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >