normal mapping - Page 493

Cisco VPN Client Behind ASA 5505

- by fdf33

I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

Read the article

C# XNA Handle mouse events?

- by user406470

I'm making a 2D game engine called Clixel over on GitHub. The problem I have relates to two classes, ClxMouse and ClxButton. In it I have a mouse class - the code for that can be viewed here. ClxMouse using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; namespace org.clixel { public class ClxMouse : ClxSprite { private MouseState _curmouse, _lastmouse; public int Sensitivity = 3; public bool Lock = true; public Vector2 Change { get { return new Vector2(_curmouse.X - _lastmouse.X, _curmouse.Y - _lastmouse.Y); } } private int _scrollwheel; public int ScrollWheel { get { return _scrollwheel; } } public bool LeftDown { get { if (_curmouse.LeftButton == ButtonState.Pressed) return true; else return false; } } public bool RightDown { get { if (_curmouse.RightButton == ButtonState.Pressed) return true; else return false; } } public bool MiddleDown { get { if (_curmouse.MiddleButton == ButtonState.Pressed) return true; else return false; } } public bool LeftPressed { get { if (_curmouse.LeftButton == ButtonState.Pressed && _lastmouse.LeftButton == ButtonState.Released) return true; else return false; } } public bool RightPressed { get { if (_curmouse.RightButton == ButtonState.Pressed && _lastmouse.RightButton == ButtonState.Released) return true; else return false; } } public bool MiddlePressed { get { if (_curmouse.MiddleButton == ButtonState.Pressed && _lastmouse.MiddleButton == ButtonState.Released) return true; else return false; } } public bool LeftReleased { get { if (_curmouse.LeftButton == ButtonState.Released && _lastmouse.LeftButton == ButtonState.Pressed) return true; else return false; } } public bool RightReleased { get { if (_curmouse.RightButton == ButtonState.Released && _lastmouse.RightButton == ButtonState.Pressed) return true; else return false; } } public bool MiddleReleased { get { if (_curmouse.MiddleButton == ButtonState.Released && _lastmouse.MiddleButton == ButtonState.Pressed) return true; else return false; } } public MouseState CurMouse { get { return _curmouse; } } public MouseState LastMouse { get { return _lastmouse; } } public ClxMouse() : base(ClxG.Textures.Default.Cursor) { _curmouse = Mouse.GetState(); _lastmouse = _curmouse; CollisionBox = new Rectangle(ClxG.Screen.Center.X, ClxG.Screen.Center.Y, Texture.Width, Texture.Height); this.Solid = false; DefaultPosition = new Vector2(CollisionBox.X, CollisionBox.Y); Mouse.SetPosition(CollisionBox.X, CollisionBox.Y); } public ClxMouse(Texture2D _texture) : base(_texture) { _curmouse = Mouse.GetState(); _lastmouse = _curmouse; CollisionBox = new Rectangle(ClxG.Screen.Center.X, ClxG.Screen.Center.Y, Texture.Width, Texture.Height); DefaultPosition = new Vector2(CollisionBox.X, CollisionBox.Y); } public override void Update() { _lastmouse = _curmouse; _curmouse = Mouse.GetState(); if (_curmouse != _lastmouse) { if (ClxG.Game.IsActive) { _scrollwheel = _curmouse.ScrollWheelValue; Velocity = new Vector2(Change.X / Sensitivity, Change.Y / Sensitivity); if (Lock) Mouse.SetPosition(ClxG.Screen.Center.X, ClxG.Screen.Center.Y); _curmouse = Mouse.GetState(); } base.Update(); } } public override void Draw(SpriteBatch _sb) { base.Draw(_sb); } } } ClxButton using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; namespace org.clixel { public class ClxButton : ClxSprite { /// <summary> /// The color when the mouse is over the button /// </summary> public Color HoverColor; /// <summary> /// The color when the color is being clicked /// </summary> public Color ClickColor; /// <summary> /// The color when the button is inactive /// </summary> public Color InactiveColor; /// <summary> /// The color when the button is active /// </summary> public Color ActiveColor; /// <summary> /// The color after the button has been clicked. /// </summary> public Color ClickedColor; /// <summary> /// The text to be displayed on the button, set to "" if no text is needed. /// </summary> public string Text; /// <summary> /// The ClxText object to be displayed. /// </summary> public ClxText TextRender; /// <summary> /// The ClxState that should be ResetAndShow() when the button is clicked. /// </summary> public ClxState ClickState; /// <summary> /// Collision check to make sure onCollide() only runs once per frame, /// since only the mouse needs to be collision checked. /// </summary> private bool _runonce = false; /// <summary> /// Gets a value indicating whether this instance is colliding. /// </summary> /// <value> /// <c>true</c> if this instance is colliding; otherwise, <c>false</c>. /// </value> public bool IsColliding { get { return _runonce; } } /// <summary> /// Initializes a new instance of the <see cref="ClxButton"/> class. /// </summary> public ClxButton() : base(ClxG.Textures.Default.Button) { HoverColor = Color.Red; ClickColor = Color.Blue; InactiveColor = Color.Gray; ActiveColor = Color.White; ClickedColor = Color.Yellow; Text = Name + ID + " Unset!"; TextRender = new ClxText(); TextRender.Text = Text; TextRender.TextPadding = new Vector2(5, 5); ClickState = null; CollideObjects(ClxG.Mouse); } /// <summary> /// Initializes a new instance of the <see cref="ClxButton"/> class. /// </summary> /// <param name="_texture">The button texture.</param> public ClxButton(Texture2D _texture) : base(_texture) { HoverColor = Color.Red; ClickColor = Color.Blue; InactiveColor = Color.Gray; ActiveColor = Color.White; ClickedColor = Color.Yellow; Texture = _texture; Text = Name + ID; TextRender = new ClxText(); TextRender.Name = this.Name + ".TextRender"; TextRender.Text = Text; TextRender.TextPadding = new Vector2(5, 5); TextRender.Reset(); ClickState = null; CollideObjects(ClxG.Mouse); } /// <summary> /// Draws the debug information, run from ClxG.DrawDebug unless manual control is assumed. /// </summary> /// <param name="_sb">SpriteBatch used for drawing.</param> public override void DrawDebug(SpriteBatch _sb) { _runonce = false; TextRender.DrawDebug(_sb); _sb.Draw(Texture, ActualRectangle, new Rectangle(0, 0, Texture.Width, Texture.Height), DebugColor, Rotation, Origin, Flip, Layer); _sb.Draw(ClxG.Textures.Default.DebugBG, new Rectangle(ActualRectangle.X - DebugLineWidth, ActualRectangle.Y - DebugLineWidth, ActualRectangle.Width + DebugLineWidth * 2, ActualRectangle.Height + DebugLineWidth * 2), new Rectangle(0, 0, ClxG.Textures.Default.DebugBG.Width, ClxG.Textures.Default.DebugBG.Height), DebugOutline, Rotation, Origin, Flip, Layer - 0.1f); _sb.Draw(ClxG.Textures.Default.DebugBG, ActualRectangle, new Rectangle(0, 0, ClxG.Textures.Default.DebugBG.Width, ClxG.Textures.Default.DebugBG.Height), DebugBGColor, Rotation, Origin, Flip, Layer - 0.01f); } /// <summary> /// Draws using the SpriteBatch, run from ClxG.Draw unless manual control is assumed. /// </summary> /// <param name="_sb">SpriteBatch used for drawing.</param> public override void Draw(SpriteBatch _sb) { _runonce = false; TextRender.Draw(_sb); if (Visible) if (Debug) { DrawDebug(_sb); } else _sb.Draw(Texture, ActualRectangle, new Rectangle(0, 0, Texture.Width, Texture.Height), Color, Rotation, Origin, Flip, Layer); } /// <summary> /// Updates this instance. /// </summary> public override void Update() { if (this.Color != ActiveColor) this.Color = ActiveColor; TextRender.Layer = this.Layer + 0.03f; TextRender.Text = Text; TextRender.Scale = .5f; TextRender.Name = this.Name + ".TextRender"; TextRender.Origin = new Vector2(TextRender.CollisionBox.Center.X, TextRender.CollisionBox.Center.Y); TextRender.Center(this); TextRender.Update(); this.CollisionBox.Width = (int)(TextRender.CollisionBox.Width * TextRender.Scale) + (int)(TextRender.TextPadding.X * 2); this.CollisionBox.Height = (int)(TextRender.CollisionBox.Height * TextRender.Scale) + (int)(TextRender.TextPadding.Y * 2); base.Update(); } /// <summary> /// Collide event, takes the colliding object to call it's proper collision code. /// You'd want to use something like if(typeof(collider) == typeof(ClxObject) /// </summary> /// <param name="collider">The colliding object.</param> public override void onCollide(ClxObject collider) { if (!_runonce) { _runonce = true; UpdateEvents(); base.onCollide(collider); } } /// <summary> /// Updates the mouse based events. /// </summary> public void UpdateEvents() { onHover(); if (ClxG.Mouse.LeftReleased) { onLeftReleased(); return; } if (ClxG.Mouse.RightReleased) { onRightReleased(); return; } if (ClxG.Mouse.MiddleReleased) { onMiddleReleased(); return; } if (ClxG.Mouse.LeftPressed) { onLeftClicked(); return; } if (ClxG.Mouse.RightPressed) { onRightClicked(); return; } if (ClxG.Mouse.MiddlePressed) { onMiddleClicked(); return; } if (ClxG.Mouse.LeftDown) { onLeftClick(); return; } if (ClxG.Mouse.RightDown) { onRightClick(); return; } if (ClxG.Mouse.MiddleDown) { onMiddleClick(); return; } } /// <summary> /// Shows the state of the click. /// </summary> public void ShowClickState() { if (ClickState != null) { ClickState.ResetAndShow(); } } /// <summary> /// Hover event /// </summary> virtual public void onHover() { this.Color = HoverColor; } /// <summary> /// Left click event /// </summary> virtual public void onLeftClick() { this.Color = ClickColor; } /// <summary> /// Right click event /// </summary> virtual public void onRightClick() { } /// <summary> /// Middle click event /// </summary> virtual public void onMiddleClick() { } /// <summary> /// Left click event, called once per click /// </summary> virtual public void onLeftClicked() { ShowClickState(); } /// <summary> /// Right click event, called once per click /// </summary> virtual public void onRightClicked() { this.Reset(); } /// <summary> /// Middle click event, called once per click /// </summary> virtual public void onMiddleClicked() { } /// <summary> /// Ons the left released. /// </summary> virtual public void onLeftReleased() { this.Color = ClickedColor; } virtual public void onRightReleased() { } virtual public void onMiddleReleased() { } } } The issue I have is that I have all these have event styled methods, especially in ClxButton with all the onLeftClick, onRightClick, etc, etc. Is there a better way for me to handle these events to be a lot more easier for a programmer to use? I was looking at normal events on some other sites, (I'd post them but I need more rep.) and didn't really see a good way to implement delegate events into my framework. I'm not really sure how these events work, could someone possibly lay out how these events are processed for me? TL:DR * Is there a better way to handle events like this? * Are events a viable solution to this problem? Thanks in advance for any help.

Read the article

CodePlex Daily Summary for Monday, December 10, 2012

CodePlex Daily Summary for Monday, December 10, 2012Popular ReleasesMOBZcript: MOBZcript 0.9.1: First fix - typo in mobzystems.com-url!Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup Added: Group Searches to hidefrom and showto for the booking system Added: DFS Targeting ...Ynote Classic: Ynote Classic version 1.0: Ynote Classic is a text editor made by SS Corporation. It can help you write code by providing you with different codes for creation of html or batch files. You can also create C/C++ /Java files with SS Ynote Classic. Author of Ynote Classic is Samarjeet Singh. Ynote Classic is available with different themes and skins. It can also compile *.bat files into an executable file. It also has a calculator built within it. 1st version released of 6-12-12 by Samarjeet Singh. Please contact on http:...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.XNA GPU Particles Tool: Multi-Effect Release 20525: This version allows creating multiple effects with multiple emitters. Load, change and save particle effects. Display them in various ways to help design the effect. There are also some help pages to explain what the main settings do. This includes some preset emitter settings and a camera position for a First Person view. Source code only for XNA 4 and Visual Studio express 2010.Implementing Google Protocol Buffers using C#: Console Application: Compiled Version of the Application. The application is developed using MS.NET 4.0 run time.MB Tools: WDSMulticastMonitor V2.0: Updated version of WDSMulticast Monitor: Uses WdsTransportManger Comobject instead of WdsManager, this means that it works on servers that only have the transport role installed. Old version required the full WDS role to be installed to work. Some minor bugfixes and extra errorchecks added Added Transfererate to output, although this seems to work only sporadic. Its not a limitation of this script though, when not outputing anything in script niether is the normal wds tools.Yahoo! UI Library: YUI Compressor for .Net: Version 2.2.0.0 - Epee: New : Web Optimization package! Cleaned up the nuget packages BugFix: minifying lots of files will now be faster because of a recent regression in some code. (We were instantiating something far too many times).DtPad - .NET Framework text editor: DtPad 2.9.0.40: http://dtpad.diariotraduttore.com/files/images/flag-eng.png English + A new built-in editor for the management of CSV files, including the edit of cells, deleting and adding new rows, replacement of delimiter character and much more (issue #1137) + The limit of rows allowed before the decommissioning of their side panel has been raised (new default: 1.000) (issue #1155, only partially solved) + Pressing CTRL+TAB now DtPad opens a screen that shows the list of opened tabs (issue #1143) + Note...AvalonDock: AvalonDock 2.0.1746: Welcome to the new release of AvalonDock 2.0 This release contains a lot (lot) of bug fixes and some great improvements: Views Caching: Content of Documents and Anchorables is no more recreated everytime user move it. Autohide pane opens really fast now. Two new themes Expression (Dark and Light) and Metro (both of them still in experimental stage). If you already use AD 2.0 or plan to integrate it in your future projects, I'm interested in your ideas for new features: http://avalondock...AcDown?????: AcDown????? v4.3.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ?? v4.3.2?? ?????????????????? ??Acfun??????? ??Bilibili?????? ??Bilibili???????????? ??Bilibili????????? ??????????????? ???? ??Bilibili??????? ????32??64? Windows XP/...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.2: ??FineUI ?? ExtJS ??? ASP.NET 2.0 ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License 2.0 (Apache) ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ ???? +2012-12-03 v3.2.2 -?????????????，?????button/button_menu.aspx（????）。 +?Window????Plain??；?ToolbarPosition??Footer??；?????FooterBarAlign??。 -????win...Player Framework by Microsoft: Player Framework for Windows Phone 8: This is a brand new version of the Player Framework for Windows Phone, available exclusively for Windows Phone 8, and now based upon the Player Framework for Windows 8. While this new version is not backward compatible with Windows Phone 7 (get that http://smf.codeplex.com/releases/view/88970), it does offer the same great feature set plus dozens of new features such as advertising, localization support, and improved skinning. Click here for more information about what's new in the Windows P...New ProjectsConfigMgrUI: UI for System Center Configuration Manager 2007 & 2012, System Center Orchestrator 2012 and MDT. cvn demo poject: just a test projectDelicious Notify Plugin: Lets you push a blog post straight to Delicious from Live WriterInsert Acronym Tags: Lets you insert <acronym> and <abbr> tags into your blog entry more easily.Insert File(s): Allows you to include up to three files for publishing in a post using Windows Live Writer.Insert Quick Link: Allows you to paste a link into the Writer window and have the a window similar to the one in Writer where you can change what text is to appear, open in new window, etc.ISD training tasks: ISD training examples and tasksjack1209132501: tesingjack12091327: tesingKata: Just a couple of solutions to katas found over around the web.KJFramework????(Mono Version): KJFramework????(Mono Version)Liber: The Dynamic library manager Managing Ebook and derivatives under different Tags & Properties Share Libers under PUBLIC TAGS in the LIBER Community... Libro Visual Basic 2012 spiegato a mia nonna: Tutti gli esempi del libro "Visual Basic 2012 spiegato a mia nonna". Work in progress...log4net SharePoint 2013 Appender: log4net SharePoint 2013 AppenderMethodSerializer: .NET Method Serializer DeserializerMGR.VSSolutionManager: MGR.VSSolutionManager is a tool to help to manage (update, compare, merge) Visual Studio's solution files.MIAGE IHM: BlablaPCV_Tutorial: PCV_TutorialRoll Manager: Roll Manager is a client/server application that makes it easy to create scripts with many actions that run against groups of servers. No more DOS batch scripts. It's developed in C# .NET 3.5.RootFinder: Comprehensive implementation of a 1D RootFinder framework solution - implements the full suite of bracketing and open methods, and their primitives/compoundSGF Editor: SGF Editor reads/writes .sgf files, edits Go game trees, etc. It has several useful commands for reviewing games. For searching purposes: goban, baduk, weiqi.SharePoint 365 Utilities: SharePoint 365 aims helping SharePoint developers improve the delivery time of SharePoint solutions by offering a set of utilities for DEV/Deploy/Maintenance.SNMP: ????windwos api ? WinSNMP API ??????Stock Analitator: Stock Analyzer using Relative Strength IndexTPV: TPVTrending Topic Component: This component is a final assignment of Component Based Programming in Duta Wacana Christian Univerity, Yogyakarta, IndonesiaVisual .NET RogueLike: A basic roguelike hacked out in Visual .NET. I'm unsure where I want to go with the project, so I'm just putting it out there for now.YooYoo: Personal DevelopingYou are here (for Windows Mobile): This sample shows you how to play a *.wav file on your device with Compact Framework 2.0. There is better support for playing music on Compact Framework 3.5. The idea of this sample is from this video: http://www.youtube.com/watch?v=xMcSNfrT-4MZoom.PE: PE read/write libraryZX AAA Workshop: ????????? ZX AAA Workshop ????????????? ??? ????????? ???????? ? ???? ?????????? ?????????? ZX Spectrum. ?????????????? ?????????: Specaculator, Unreal, Fuse. ??????????? ?????????? ????????? ?????? ?????????? ?????????????. ?????????? ?????? ? ??????? png, gif, bmp, tiff, jpeg.???????? ??????? ?????????? ? Visual Studio: ???????? ??????? ?????????? ? Visual Studio

Read the article

After segment lost TCP connection never recovers

- by mvladic

Take a look at following trace taken with Wireshark: http://dl.dropbox.com/u/145579/trace1.pcap or http://dl.dropbox.com/u/145579/trace2.pcap I will repeat here an interesting part (from trace1.pcap): No. Time Source Destination Protocol Length Info 1850 2012-02-09 13:44:32.609 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=581704 Win=65392 Len=0 1851 2012-02-09 13:44:32.610 192.168.4.213 172.22.37.4 COTP 550 DT TPDU (0) [COTP fragment, 509 bytes] 1852 2012-02-09 13:44:32.639 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1853 2012-02-09 13:44:32.639 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=582736 Win=65392 Len=0 1854 2012-02-09 13:44:32.657 192.168.4.213 172.22.37.4 TCP 590 [TCP Previous segment lost] 62479 > iso-tsap [ACK] Seq=583232 Ack=345 Win=65191 Len=536 1855 2012-02-09 13:44:32.657 192.168.4.213 172.22.37.4 TCP 108 [TCP segment of a reassembled PDU] 1856 2012-02-09 13:44:32.657 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1853#1] iso-tsap > 62479 [ACK] Seq=345 Ack=582736 Win=65392 Len=0 1857 2012-02-09 13:44:32.657 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1853#2] iso-tsap > 62479 [ACK] Seq=345 Ack=582736 Win=65392 Len=0 1858 2012-02-09 13:44:32.675 192.168.4.213 172.22.37.4 COTP 590 [TCP Fast Retransmission] DT TPDU (0) [COTP fragment, 509 bytes] 1859 2012-02-09 13:44:32.715 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1860 2012-02-09 13:44:32.715 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=583272 Win=65392 Len=0 1861 2012-02-09 13:44:32.796 192.168.4.213 172.22.37.4 COTP 590 [TCP Retransmission] DT TPDU (0) EOT 1862 2012-02-09 13:44:32.945 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1863 2012-02-09 13:44:32.945 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=583808 Win=65392 Len=0 1864 2012-02-09 13:44:32.963 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1865 2012-02-09 13:44:32.963 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1863#1] iso-tsap > 62479 [ACK] Seq=345 Ack=583808 Win=65392 Len=0 1866 2012-02-09 13:44:32.963 192.168.4.213 172.22.37.4 TCP 576 [TCP segment of a reassembled PDU] 1867 2012-02-09 13:44:32.963 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1863#2] iso-tsap > 62479 [ACK] Seq=345 Ack=583808 Win=65392 Len=0 1868 2012-02-09 13:44:33.235 192.168.4.213 172.22.37.4 COTP 590 [TCP Retransmission] DT TPDU (0) [COTP fragment, 509 bytes] 1869 2012-02-09 13:44:33.434 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=584344 Win=65392 Len=0 1870 2012-02-09 13:44:33.447 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1871 2012-02-09 13:44:33.447 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1869#1] iso-tsap > 62479 [ACK] Seq=345 Ack=584344 Win=65392 Len=0 1872 2012-02-09 13:44:33.806 192.168.4.213 172.22.37.4 COTP 590 [TCP Retransmission] DT TPDU (0) [COTP fragment, 509 bytes] 1873 2012-02-09 13:44:34.006 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=584880 Win=65392 Len=0 1874 2012-02-09 13:44:34.018 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1875 2012-02-09 13:44:34.018 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1873#1] iso-tsap > 62479 [ACK] Seq=345 Ack=584880 Win=65392 Len=0 1876 2012-02-09 13:44:34.932 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1877 2012-02-09 13:44:35.132 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=585416 Win=65392 Len=0 1878 2012-02-09 13:44:35.144 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1879 2012-02-09 13:44:35.144 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1877#1] iso-tsap > 62479 [ACK] Seq=345 Ack=585416 Win=65392 Len=0 1880 2012-02-09 13:44:37.172 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1881 2012-02-09 13:44:37.372 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=585952 Win=65392 Len=0 1882 2012-02-09 13:44:37.385 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1883 2012-02-09 13:44:37.385 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1881#1] iso-tsap > 62479 [ACK] Seq=345 Ack=585952 Win=65392 Len=0 1884 2012-02-09 13:44:41.632 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1885 2012-02-09 13:44:41.832 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=586488 Win=65392 Len=0 1886 2012-02-09 13:44:41.844 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1887 2012-02-09 13:44:41.844 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1885#1] iso-tsap > 62479 [ACK] Seq=345 Ack=586488 Win=65392 Len=0 1888 2012-02-09 13:44:50.554 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1889 2012-02-09 13:44:50.753 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=587024 Win=65392 Len=0 1890 2012-02-09 13:44:50.766 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1891 2012-02-09 13:44:50.766 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1889#1] iso-tsap > 62479 [ACK] Seq=345 Ack=587024 Win=65392 Len=0 1892 2012-02-09 13:45:08.385 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1893 2012-02-09 13:45:08.585 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=587560 Win=65392 Len=0 1894 2012-02-09 13:45:08.598 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1895 2012-02-09 13:45:08.598 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1893#1] iso-tsap > 62479 [ACK] Seq=345 Ack=587560 Win=65392 Len=0 1896 2012-02-09 13:45:44.059 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] 1897 2012-02-09 13:45:44.259 172.22.37.4 192.168.4.213 TCP 54 iso-tsap > 62479 [ACK] Seq=345 Ack=588096 Win=65392 Len=0 1898 2012-02-09 13:45:44.272 192.168.4.213 172.22.37.4 COTP 590 DT TPDU (0) [COTP fragment, 509 bytes] 1899 2012-02-09 13:45:44.272 172.22.37.4 192.168.4.213 TCP 54 [TCP Dup ACK 1897#1] iso-tsap > 62479 [ACK] Seq=345 Ack=588096 Win=65392 Len=0 1900 2012-02-09 13:46:55.386 192.168.4.213 172.22.37.4 TCP 590 [TCP Retransmission] [TCP segment of a reassembled PDU] Some background information (not much, unfortunately, as I'm responsible only for server part): Server (172.22.37.4) is Windows Server 2008 R2 and client (192.168.4.213) is Ericsson telephone exchange of whom I do not know much. Client sends a file to server using FTAM protocol. This problem happens very often. I think, either client or server is doing sliding window protocol wrong. Server sends dup ack, client retransmits lost packet, but soon after client sends packets with wrong seq. Again, Server sends dup ack, client retransmits lost packet - but, this time with longer retransmission timeout. Again, client sends packet with wrong seq. Etc... Retransmission timeout grows to circa 4 minutes and communications never recovers to normal.

Read the article

e-interview: SunSpace to WebCenter migration

- by me

I had the pleasure to do an e-interview with Ana Neves around the SunSpace to WebCenter migration project. Below is the english version of the interview. Enjoy Peter, you joined Oracle in 2009 through the acquisition of Sun. Becoming a part of Oracle meant many changes. The internal collaboration platform was one of them, as per a post you wrote back in 2011. Sun had SunSpace. How would you describe SunSpace? SunSpace was the internal Community and Social Collaboration platform for the Sun's Global Sales and Services Organization. SunSpace served around 600 communities with a main focus around technology, products and services. SunSpace was a big success. Within 3 months of its launch SunSpace had over 20,000 users and it won the Atlassian "Not just another wiki" Award for the best use of Confluence (https://blogs.oracle.com/peterreiser/entry/goodbye_sunspace_hello_webcenter). What made SunSpace so special? 1. People centric versus Web centric The main concept of SunSpace put the person in the middle of everything. All relevant information, resources etc. where dynamically pushed to a person's myProfile ( Facebook like interface) based on the person's interest and needs. 2. Ease to use SunSpace was really easy to use. We spent a lot of time on social interaction design to optimize the user experience. Also we integrated some sophisticated technology to hide complexity from the user. As example - when a user added a document to SunSpace - we analyzed the content of the document and suggested related metadata and tags to the user based on a sophisticated algorithm which was integrated with the corporate taxonomy. Based on this metadata the document was automatically shared with the relevant communities. 3. Easy to find One of the main use cases for SunSpace was that a user could quickly find the content and information they needed for their job. The search implementation was based on: optimized search engine algorithm using social value based ranking enhancements community facilitated search optimization faceted search which recommended highly relevant content like products, communities and experts 4. Social Adoption - How to build vibrant communities You can deploy the coolest social technology but what if the users are not using it? To drive user adoption we implemented two complementary models: 4.1 Community Methodology We developed a set of best practices on how to create, run and sustain communities including: community structure and types (e.g. Community of Practice, Community of Interest etc.) & tips and tricks on how to build a "vibrant " communities, Community Health check etc. These best practices where constantly tuned and updated by the community of community drivers. 4.2. Social Value System To drive user adoption there is ONE key question you have to answer for each individual user: What's In It For Me (WIIFM) We developed a Social Value System called Community Equity which measures the social value flow between People, Content and Metadata. Based on this technology we added "Gamfication" techniques (although at that time this term did not exist ) to SunSpace to honor people for the active contribution and participation. As example: All social credentials a user earned trough active community participation where dynamically displayed on her/his myProfile. How would you describe WebCenter? Oracle WebCenter (@oraclewebcenter) is the Oracle's user engagement platform for social business. It helps people work together more efficiently through contextual collaboration tools that optimize connections between people, information, and applications and ensures users have access to the right information in the context of the business process in which they are engaged. Oracle WebCenter can help your organization deliver contextual and targeted Web experiences to users and enable employees to access information and applications through intuitive portals, composite applications, and mash-ups. How does it compare to SunSpace in terms of functionality? Before I answer this question, I would like to point out some limitation we started to see with the current SunSpace implementation. Due to the massive growth of the user population (>20,000 users), we experienced performance and scalability challenges with the current technology. Also at the time - Sun Internal Communications and SunIT planned to replace the entire Sun Intranet with SunSpace. We kicked-off a project to evaluate the enterprise level technology which eventually would replace the good old static Intranet. And then Oracle acquired Sun. We already had defined the functional requirements for the Intranet replacement with a Social Enterprise Stack and we just needed to evaluate the functional requirements against WebCenter Below are the summary of this evaluation MyProfile SunSpace WebCenter How WebCenter Works Home MyProfile: to access, click on your name at the top of any WebCenter page Your name, title, and reporting line are displayed. Sub-tabs show your activity stream (Activities); people in your network (Connections); files you have uploaded (Documents); your contact information (Organization); and any personal information you wish to share (About). Files MyFiles Allows you to upload, download and store documents or wiki pages within folders and subfolders. The WebDav interface allows you to download / upload files / folders with a simple drag and drop to / from your local machine. Tagging is supported and recommended. Network HomeMyConnections Home: displays the activity stream of individuals in your network.MyConnections: shows individuals in your network. Click on a person's name to see their contact info and link to their profile. Status Updates MyProfle > Activties Add and displays your recent activties and status updates. Watches Preferences > Subscriptions > Current Subscriptions Receive email notifications when pages / spaces you watch are modified. Drafts N/A WebCenter does not support Drafts Settings Preferences: to access, click on 'Preferences' at the top of any WebCenter page Set your general preferences, as well as your WebCenter messaging, search and mail settings. MyCommunities MySpaces: to access, click on 'Spaces' at the top of any WebCenter page Displays MySpaces (communities you are a member of); and Recent Spaces (communities you have recently visited). Community SunSpace Webcenter How Webcenter Works Home Home Displays a community introduction and activity stream. Members can add messages, links or documents via the Community Message Board. No Top Contributors widget. People Members Lists members of the community. The Mail All Members feature allows moderators and participants to send a message to all members of the community. Membership Management can be found under > Manage > Members News News Members can post and access latest community news and they can subscribe to news using an RSS reader Documents Documents Allows community members to upload, download and store documents or wiki pages within folders and subfolders. The WebDav interface allows participants to download / upload files / folders with a simple drag and drop to / from your local machine. Tagging is supported and recommended. Wiki Wiki Allows community members to create and update web pages with a WYSIWYG editor. Note: WebCenter does not support macros or portlet embedding. Forum Forum Post community forum topics. Contribute to community forum conversations. N/A Calendar Update and/or view the Community Calendar. N/A Analytics Displays detailed analytics data (views,downloads, unique users etc.) for Pages, Wiki, Documents, and Forum in a given community space. What is the adoption of WebCenter at Oracle? The entire Intranet serving around 100,000 users is running on WebCenter Content. For professional communities we use WebCenter Portal and Spaces. Currently we have around 6,000 community spaces with around 40,000 members. Does Oracle have any metrics to assess usage and impact of WebCenter? Can you give us some examples? Sure - we have a lot of metrics For the Intranet we use traditional metrics like pageviews, monthly unique visitors and unique visits. For Communities we use the WebCenter Portal/Spaces analytics service which gives as a wealth of data. The key metrics we track are: Space traffic (PageViews, Unique Users) Wiki,Documents (views, downloads etc.) Forum (users, views, posts etc.) Registered members over time Depending on the community we can filter/segment the metrics by User Properties e.g. Country, Organization, Job Role etc. What are you doing to improve usage and impact? 1. We integrating the WebCenter social services/fabric into all main business applications. As example The Fusion CRM deployment is seamless integrated with Oracle Social Network (OSN) and all conversation around an opportunity or customer engagement is done in OSN (see youtube video). 2. We drive Social Best Practice trough a program called "Social Networking & Business Collaboration (SNBC) program" You worked both with WebCenter and SunSpace. Knowing what you know today, if you had the chance to choose between the two, which one would you choose? Why? That's a tricky question In the early days of the Social Enterprise implementation (we started SunSpace in 2006), we needed an agile and easy to deploy technology to keep up with the users requirements. Sometimes we pushed two releases per day and we were in a permanent perpetual beta mode - SunSpace was perfect for that. After the social implementation matured over time - community generated content became business critical and we saw a change in the requirements from agile to stability, scalability and reliability of the infrastructure. WebCenter is the right choice for such an enterprise-level deployment. You are a WebCenter Evangelist at Oracle. What do you do as part of that role? Our role is to help position Oracle as one of the key thought leaders and solutions provider for Social Business. In addition we drive social innovation trough our Oracle Appslab team. Is that a full time role? Yes How many other Evangelists are there in Oracle? We are currently 5 people in the WebCenter evangelist team (@webcentervoices): Christian Finn (@cfinn) leads the team - Christian came from the Microsoft Sharepoint product management team and is a recognized expert in Social Business and Enterprise Collaboration. Noël Jaffré (@noeljaffre) is our Web Experience Management (WEM) guru and came to Oracle via FatWire acquisition (now WebCenter Sites). Jake Kuramoto (@theapplab) is part of the Oracle AppsLab innovation team - Jake is well known as the driving force behind http://theappslab.com a blog around social and innovation. Noel Portugal (@noelportugal) is a developer in the Oracle AppsLab innovation team - he is the inventor of OraTweet - Oracle's internal tweeting platform Peter Reiser (@peterreiser) is a Social Business guru and the inventor of SunSpace and Community Equity. What area of the business do you and the rest of the Evangelists sit in? What area of the organisation is responsible for WebCenter? We are part of the WebCenter product management organization. Is WebCenter part of the Knowledge Management strategy? Oracle WebCenter is the Oracle's user engagement platform for social business. It brings together the most complete portfolio of portal, web experience management, content, social and collaboration technologies into a single product suite and is the product foundation of the Oracle Knowledge Management strategy. I am aware Oracle also uses Beehive internally. How would you describe Beehive? Oracle Beehive provides an integrated set of communication and collaboration services built on a single scalable, secure, enterprise-class platform Beehive is internally used for enterprise wide mail, calendar and real collaboration (Web conferencing) services. Are Beehive and WebCenter connected? Historically Beehive and WebCenter Portal & Content had some overlap in functionally. (Hey - if a company has an acquisition strategy to strengthen its product offering and accelerate innovation, it's pretty normal that functional overlap exists :- )) A key objective of the WebCenter strategy is to combine all social and collaboration offerings under the WebCenter product family. That means that certain Beehive components will be integrated into the overall WebCenter product offering. Are there any other internal collaboration tools at Oracle? Which ones There here are two other main social tools which are widely used at Oracle Oracle Connect was the first social tool the Oracle AppsLab team created in 2007 - see (Jake's blog post for details). It is still extensively used. ... and as a former Sun guy I like this quote from the blog post: "Traffic to Connect peaked right after the Sun merger in 2010, when it served several hundred thousand pageviews each month; since then, traffic has subsided, but still averages tens of thousands of pageviews to several thousand users each month." Oratweet - Oracle internal microblogging platform has been used since June 2008 and it is still growing. It's entirely written in Oracle Application Express (APEX) which is a rapid web application development tool for the Oracle database. Wanna try it out? Here you can download the code. What is Oracle's strategy regarding (all these) collaboration tools? Pretty straight forward. The strategy is to seamless integrate the WebCenter social & collaboration services into all Business Applications to help customers to socialize their enterprise.

Read the article

Can't connect to samba

- by Rick

Windows 7, connecting to Samba shares I have a follow up question from the link above. I am running Samba 3.0.23d on FreeBSD is release 7.1 I changed the policies as described above but still cannot connect to the samba server with the windows 7 or a server 2008. I feel it is a problem with recognizing the new machines on the network. the windows machines can see the samba server, but cannot connect to it or view any of the files. After changing the security policies the samba server asked for network id and password but would not allow the machine to connect, said they were unknown username or bad password. Here is my current config file. there is no sign of encryption anywhere, should I just add the line? not sure what that would do elsewhere. Workgroup = WWOFFSET server string = WWO File Server (%v) security = server username map = /usr/local/etc/smb.users hosts allow = 10. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> password server = SERVER0 # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam ; passdb backend = smbpasswd # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/etc/smb.conf.%m # Most people will find that this option gives better performance. # See the chapter 'Samba performance issues' in the Samba HOWTO Collection # and the manual pages for details. # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # charset settings ; display charset = ASCII ; unix charset = ASCII ; dos charset = ASCII # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g unix extensions = no

Read the article

Forensic Analysis of the OOM-Killer

- by Oddthinking

Ubuntu's Out-Of-Memory Killer wreaked havoc on my server, quietly assassinating my applications, sendmail, apache and others. I've managed to learn what the OOM Killer is, and about its "badness" rules. While my machine is small, my applications are even smaller, and typically only half of my physical memory is in use, let alone swap-space, so I was surprised. I am trying to work out the culprit, but I don't know how to read the OOM-Killer logs. Can anyone please point me to a tutorial on how to read the data in the logs (what are ve, free and gen?), or help me parse these logs? Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 1, exc 2326 0 goal 2326 0... Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): task ebb0c6f0, thg d33a1b00, sig 1 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 1, exc 2326 0 red 61795 745 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 2, exc 122 0 goal 383 0... Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): task ebb0c6f0, thg d33a1b00, sig 1 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 2, exc 383 0 red 61795 745 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): task ebb0c6f0, thg d33a1b00, sig 2 Apr 20 20:03:27 EL135 kernel: OOM killed process watchdog (pid=14490, ve=13516) exited, free=43104 gen=24501. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=4457, ve=13516) exited, free=43104 gen=24502. Apr 20 20:03:27 EL135 kernel: OOM killed process ntpd (pid=10816, ve=13516) exited, free=43104 gen=24503. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=27401, ve=13516) exited, free=43104 gen=24504. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=29009, ve=13516) exited, free=43104 gen=24505. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=10557, ve=13516) exited, free=49552 gen=24506. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=24983, ve=13516) exited, free=53117 gen=24507. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=29129, ve=13516) exited, free=68493 gen=24508. Apr 20 20:03:27 EL135 kernel: OOM killed process sendmail-mta (pid=941, ve=13516) exited, free=68803 gen=24509. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=12418, ve=13516) exited, free=69330 gen=24510. Apr 20 20:03:27 EL135 kernel: OOM killed process python (pid=22953, ve=13516) exited, free=72275 gen=24511. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=6624, ve=13516) exited, free=76398 gen=24512. Apr 20 20:03:27 EL135 kernel: OOM killed process python (pid=23317, ve=13516) exited, free=94285 gen=24513. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=29030, ve=13516) exited, free=95339 gen=24514. Apr 20 20:03:28 EL135 kernel: OOM killed process apache2 (pid=20583, ve=13516) exited, free=101663 gen=24515. Apr 20 20:03:28 EL135 kernel: OOM killed process logger (pid=12894, ve=13516) exited, free=101694 gen=24516. Apr 20 20:03:28 EL135 kernel: OOM killed process bash (pid=21119, ve=13516) exited, free=101849 gen=24517. Apr 20 20:03:28 EL135 kernel: OOM killed process atd (pid=991, ve=13516) exited, free=101880 gen=24518. Apr 20 20:03:28 EL135 kernel: OOM killed process apache2 (pid=14649, ve=13516) exited, free=102748 gen=24519. Apr 20 20:03:28 EL135 kernel: OOM killed process grep (pid=21375, ve=13516) exited, free=132167 gen=24520. Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 4, exc 4215 0 goal 4826 0... Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): task ede29370, thg df98b880, sig 1 Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 4, exc 4826 0 red 189481 331 Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): task ede29370, thg df98b880, sig 2 Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 5, exc 3564 0 goal 3564 0... Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): task c6c90110, thg cdb1a100, sig 1 Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 5, exc 3564 0 red 189481 331 Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): task c6c90110, thg cdb1a100, sig 2 Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 6, exc 8071 0 goal 8071 0... Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): task d7294050, thg c03f42c0, sig 1 Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 6, exc 8071 0 red 189481 331 Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): task d7294050, thg c03f42c0, sig 2 Watchdog is a watchdog task, that was idle; nothing in the logs to suggest it had done anything for days. Its job is to restart one of the applications if it dies, so a bit ironic that it is the first to get killed. Tail was monitoring a few logs files. Unlikely to be consuming memory madly. The apache web-server only serves pages to a little old lady who only uses it to get to church on Sundays a couple of developers who were in bed asleep, and hadn't visited a page on the site for a few weeks. The only traffic it might have had is from the port-scanners; all the content is password-protected and not linked from anywhere, so no spiders are interested. Python is running two separate custom applications. Nothing in the logs to suggest they weren't humming along as normal. One of them was a relatively recent implementation, which makes suspect #1. It doesn't have any data-structures of any significance, and normally uses only about 8% of the total physical RAW. It hasn't misbehaved since. The grep is suspect #2, and the one I want to be guilty, because it was a once-off command. The command (which piped the output of a grep -r to another grep) had been started at least 30 minutes earlier, and the fact it was still running is suspicious. However, I wouldn't have thought grep would ever use a significant amount of memory. It took a while for the OOM killer to get to it, which suggests it wasn't going mad, but the OOM killer stopped once it was killed, suggesting it may have been a memory-hog that finally satisfied the OOM killer's blood-lust.

Read the article

CodePlex Daily Summary for Tuesday, June 07, 2011

CodePlex Daily Summary for Tuesday, June 07, 2011Popular ReleasesSCCM Client Actions Tool: SCCM Client Actions Tool v0.5: SCCM Client Actions Tool v0.5 is currently the most stable version and includes all of the functionality requested so far. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively available starting from Windows Vista. Config.ini – A configuration file for default settings. This file is...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????VFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishOnTopReplica: Release 3.3.2: Incremental update over 3.3 and 3.3.1. Added Polish language translation (thanks to Jan Romanczyk). Added German language translation (thanks to Eric Hoffmann). Fixed some localization issues.SQL Compact Query Analyzer: Build 0.3.0.0: Beta build of SQL Compact Query Analyzer Features: - Execute SQL Queries against a SQL Server Compact Edition database - Easily edit the contents of the database - Supports SQLCE 3.1, 3.5 and 4.0 Prerequisites: - .NET Framework 4.0ShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.0.3: Fixed User Management screen when "RequiresQuestionAndAnswer" set to true Reply to Email Address can now be customized User Management page now only displays users that reside in the membership database Web parts have been changed to inherit from System.Web.UI.WebControls.WebParts.WebPart, so that they will display on anonymous application pages For installation and configuration steps see here.Babylon Toolkit: Babylon.Toolkit v1.0.4: Note about samples: In order to run samples, you need to configure visual studio to run them as an "Out-of-browser application". in order to do that, go to the property page of a sample project, go to the Debug tab, and check the "Out-of-browser application" radio. New features : New Effects BasicEffect3Lights (3 dir lights instead of 1 position light) CartoonEffect (work in progress) SkinnedEffect (with normal and specular map support) SplattingEffect (for multi-texturing with smooth ...SizeOnDisk: 1.0.8.2: With installerTerrariViewer: TerrariViewer v2.5: Added new items associated with Terraria v1.0.3 to the character editor. Fixed multiple bugs with Piggy Bank EditorySterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...EnhSim: EnhSim 2.4.6 BETA: 2.4.6 BETAThis release supports WoW patch 4.1 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the proper...Grammar and Spell Checking Plugin for Windows Live Writer: Grammar Checker Plugin v1.0: First version of the grammar checker plugin for Windows Live Writer.patterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...Claims Based Identity & Access Control Guide: Release Candidate: Highlights of this release This is the release candidate drop of the new "Claims Identity Guide" edition. In this release you will find: All code samples, including all ACS v2: ACS as a Federation Provider - Showing authentication with LiveID, Google, etc. ACS as a FP with Multiple Business Partners. ACS and REST endpoints. Using a WP7 client with REST endpoints. All ACS specific chapters. Two new chapters on SharePoint (SSO and Federation) All revised v1 chapters We are now ...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.DotRas: DotRas v1.2 (Version 1.2.4168): This release includes compiled (and signed) versions of the binaries, PDBs, CHM help documentation, along with both C# and VB.NET examples. Please don't forget to rate the release! If you find a bug, please open a work item and give as much description as possible. Stack traces, which operating system(s) you're targeting, and build type is also very helpful for bug hunting. If you find something you believe to be a bug but are not sure, create a new discussion on the discussions board. Thank...BIDS Helper: BIDS Helper 1.5: New Features Duplicate Role feature for SSAS Biml Package Generator feature for SSIS Fixes and Updates Fixes issue with Printer Friendly Dimension Usage not working from the cube right-click menu Integrated new SSIS Expression Editor Control (http://expressioneditor.codeplex.com - v1.0.3.0) SSIS variable move dialog includes improved validation as well as UI enhancements SSIS Expression List now supports variables, constraints and nested objects, as well as UI enhancements New Enab...Caliburn Micro: WPF, Silverlight and WP7 made easy.: Caliburn.Micro v1.1 RTW: Download ContentsDebug and Release Assemblies Samples Changes.txt License.txt Release Highlights For WP7A new Tombstoning API based on ideas from Fluent NHibernate A new Launcher/Chooser API Strongly typed Navigation SimpleContainer included The full phone lifecycle is made easy to work with ie. we figure out whether your app is actually Resurrecting or just Continuing for you For WPFSupport for the Client Profile Better support for WinForms integration All PlatformsA power...VidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...New ProjectsALogger: Alogger is a simple logger for time execution of methods. Uses Postsharp and SQL Server Compact. How to use?? Add Attribute to your method to check their speed of execution and its ready Sample: [AspectLogTime("Category")] private void SpeedMethod(string name) { //do something.. } Is it too simple? Azure WCF with WAS Portsharing: Sample WCF project with an Azure Webrole that supports TCP endpoints on the same port as Web (port 80). This is accomplished with the TCPPortSharing service. This project is a starter project to enable WAS (Windows Activation Service) with Windows Azure.DotNetToscana: DotNetToscana è lo User Group Toscano su .NET, un gruppo senza fini di lucro formato da persone con una forte passione per l’informatica e in particolare per prodotti e tecnologie legate al Microsoft .NET Framework.Email: Email providereriser: sandboxFacturación CFDI para Microempresas: Proyecto que pretende ayudar a la microempresa a realizar su transición de usar factura en papel a formato electrónicoFolder To SharePoint Metadata Migrator (Folders2SP): PowerShell 2.0 script to facilitate migration of SharePoint/Folder structure to a SPS2010 document library using words in the folders to set taxonomy field values, and web services to lookup source metadata and retrieve versions. Use Case: Migrate MOSS library to SPS library.Gestor de tikets de soporte técnico: Una aplicacion basada en ASP.NET que permite gestionar tikets de soporte técnicoGoogle Doc Uploader: Very simple application that allows you to upload documents to your own google document area with the right click of a mouse button.HTML App Host Framework for Phone 7: This is an HTML Application Host framework for building HTML/JavaScript for Windows Phone 7 with mango this will be for HTML5. The framework consists of controls needed to support embed html apps in a standard xap format used by the market place for deploying to phone 7.MOBZKeys: Press a hotkey to expand text fragments in any application. Unobtrusive, fully configurable from the task bar.MVC_imovies: Proyecto de tesis.RandomRat: RandomRat is a program for generating random sets that meet specific criteriaScenario Testing: Scenario Testing is an interactive tool to define your test scenarios by dragging and dropping methods to be tested. It is build using Workflow Foundation 4 (WF 4). The test scenarios can be saved and loaded again for testing.SEProject: SEProject Sharepoint 2010 Diagnostic Log Compression: This sharepoint extention helps you to compress,copy or move sharepoint uls log files to another location with a scheduled time for backup purpose.Snowball: Snowball is an in progress 2D Game Engine written in C#. It uses SlimDX under the covers but the underlying technology is abstracted away from the end user.T24 Project: T24 ProjectTaller Monitor: Taller MonitorTeam Build Deployer: Team Build Deployer makes it easy to deploy web application projects using Team Build 2010. The solution is written in C#, and enhanced build scripts, and enables Team build to use the built in web application deployment packaging configured found in Visual Studio 2010. This solution is intended to make continuous deployment easy and secure and reusable for any Visual Studio 2010 web application.Test SiteDataQuery SharePoint 2010: Software to testing SiteDataQuery Sharepoint 2010TextWrapper: A IIS managed module that enables word wrap of plain text content. Supports GZip and Deflate encoding. This module increases readability of text files that contain long lines.UMC Information System Alumni Center Website: This project is our final task for course Internet Programming II at Study Program of Information System, Faculty of Technology and Science at University of Ma Chung (UMC). UMC is private educational institution, first university in Indonesia applying Microsoft technology thoroughly called the total solution, which established in Malang, East Java, Indonesia. We named our project 'UMC Information System Alumni Center'. It doesn't mean this project is really used to be official website for ...WeatherDotCom Module for Orchard CMS: Using the Weather Channel feeds, you can connect to weather.com and pull in weather conditions for a particular search term. A live working demonstration of this module can be found on my website at jasongaylord.comWindows Phone Essentials: This library is focused on making the common things you have to do in every windows phone application, like persist application settings, use tasks/choosers, log/trace, threading/asynchronous development etc. testable.Wpf .Net Profiler: A .net profiler with wpf and sqlite

Read the article

R Package Installation with Oracle R Enterprise

- by Sherry LaMonica-Oracle

Normal 0 false false false EN-US X-NONE X-NONE Programming languages give developers the opportunity to write reusable functions and to bundle those functions into logical deployable entities. In R, these are called packages. R has thousands of such packages provided by an almost equally large group of third-party contributors. To allow others to benefit from these packages, users can share packages on the CRAN system for use by the vast R development community worldwide. R's package system along with the CRAN framework provides a process for authoring, documenting and distributing packages to millions of users. In this post, we'll illustrate the various ways in which such R packages can be installed for use with R and together with Oracle R Enterprise. In the following, the same instructions apply when using either open source R or Oracle R Distribution. In this post, we cover the following package installation scenarios for: R command line Linux shell command line Use with Oracle R Enterprise Installation on Exadata or RAC Installing all packages in a CRAN Task View Troubleshooting common errors 1. R Package Installation BasicsR package installation basics are outlined in Chapter 6 of the R Installation and Administration Guide. There are two ways to install packages from the command line: from the R command line and from the shell command line. For this first example on Oracle Linux using Oracle R Distribution, we’ll install the arules package as root so that packages will be installed in the default R system-wide location where all users can access it, /usr/lib64/R/library.Within R, using the install.packages function always attempts to install the latest version of the requested package available on CRAN:R> install.packages("arules")If the arules package depends upon other packages that are not already installed locally, the R installer automatically downloads and installs those required packages. This is a huge benefit that frees users from the task of identifying and resolving those dependencies.You can also install R from the shell command line. This is useful for some packages when an internet connection is not available or for installing packages not uploaded to CRAN. To install packages this way, first locate the package on CRAN and then download the package source to your local machine. For example:$ wget http://cran.r-project.org/src/contrib/arules_1.1-2.tar.gz Then, install the package using the command R CMD INSTALL:$ R CMD INSTALL arules_1.1-2.tar.gzA major difference between installing R packages using the R package installer at the R command line and shell command line is that package dependencies must be resolved manually at the shell command line. Package dependencies are listed in the Depends section of the package’s CRAN site. If dependencies are not identified and installed prior to the package’s installation, you will see an error similar to:ERROR: dependency ‘xxx’ is not available for package ‘yyy’As a best practice and to save time, always refer to the package’s CRAN site to understand the package dependencies prior to attempting an installation. If you don’t run R as root, you won’t have permission to write packages into the default system-wide location and you will be prompted to create a personal library accessible by your userid. You can accept the personal library path chosen by R, or specify the library location by passing parameters to the install.packages function. For example, to create an R package repository in your home directory: R> install.packages("arules", lib="/home/username/Rpackages")or$ R CMD INSTALL arules_1.1-2.tar.gz --library=/home/username/RpackagesRefer to the install.packages help file in R or execute R CMD INSTALL --help at the shell command line for a full list of command line options.To set the library location and avoid having to specify this at every package install, simply create the R startup environment file .Renviron in your home area if it does not already exist, and add the following piece of code to it:R_LIBS_USER = "/home/username/Rpackages" 2. Setting the RepositoryEach time you install an R package from the R command line, you are asked which CRAN mirror, or server, R should use. To set the repository and avoid having to specify this during every package installation, create the R startup command file .Rprofile in your home directory and add the following R code to it:cat("Setting Seattle repository")r = getOption("repos") r["CRAN"] = "http://cran.fhcrc.org/"options(repos = r)rm(r) This code snippet sets the R package repository to the Seattle CRAN mirror at the start of each R session. 3. Installing R Packages for use with Oracle R EnterpriseEmbedded R execution with Oracle R Enterprise allows the use of CRAN or other third-party R packages in user-defined R functions executed on the Oracle Database server. The steps for installing and configuring packages for use with Oracle R Enterprise are the same as for open source R. The database-side R engine just needs to know where to find the R packages.The Oracle R Enterprise installation is performed by user oracle, which typically does not have write permission to the default site-wide library, /usr/lib64/R/library. On Linux and UNIX platforms, the Oracle R Enterprise Server installation provides the ORE script, which is executed from the operating system shell to install R packages and to start R. The ORE script is a wrapper for the default R script, a shell wrapper for the R executable. It can be used to start R, run batch scripts, and build or install R packages. Unlike the default R script, the ORE script installs packages to a location writable by user oracle and accessible by all ORE users - $ORACLE_HOME/R/library.To install a package on the database server so that it can be used by any R user and for use in embedded R execution, an Oracle DBA would typically download the package source from CRAN using wget. If the package depends on any packages that are not in the R distribution in use, download the sources for those packages, also. For a single Oracle Database instance, replace the R script with ORE to install the packages in the same location as the Oracle R Enterprise packages. $ wget http://cran.r-project.org/src/contrib/arules_1.1-2.tar.gz$ ORE CMD INSTALL arules_1.1-2.tar.gzBehind the scenes, the ORE script performs the equivalent of setting R_LIBS_USER to the value of $ORACLE_HOME/R/library, and all R packages installed with the ORE script are installed to this location. For installing a package on multiple database servers, such as those in an Oracle Real Application Clusters (Oracle RAC) or a multinode Oracle Exadata Database Machine environment, use the ORE script in conjunction with the Exadata Distributed Command Line Interface (DCLI) utility.$ dcli -g nodes -l oracle ORE CMD INSTALL arules_1.1-1.tar.gz The DCLI -g flag designates a file containing a list of nodes to install on, and the -l flag specifies the user id to use when executing the commands. For more information on using DCLI with Oracle R Enterprise, see Chapter 5 in the Oracle R Enterprise Installation Guide.If you are using an Oracle R Enterprise client, install the package the same as any R package, bearing in mind that you must install the same version of the package on both the client and server machines to avoid incompatibilities. 4. CRAN Task ViewsCRAN also maintains a set of Task Views that identify packages associated with a particular task or methodology. Task Views are helpful in guiding users through the huge set of available R packages. They are actively maintained by volunteers who include detailed annotations for routines and packages. If you find one of the task views is a perfect match, you can install every package in that view using the ctv package - an R package for automating package installation. To use the ctv package to install a task view, first, install and load the ctv package.R> install.packages("ctv")R> library(ctv)Then query the names of the available task views and install the view you choose.R> available.views() R> install.views("TimeSeries") 5. Using and Managing R packages To use a package, start up R and load packages one at a time with the library command.Load the arules package in your R session. R> library(arules)Verify the version of arules installed.R> packageVersion("arules")[1] '1.1.2'Verify the version of arules installed on the database server using embedded R execution.R> ore.doEval(function() packageVersion("arules"))View the help file for the apropos function in the arules packageR> ?aproposOver time, your package repository will contain more and more packages, especially if you are using the system-wide repository where others are adding additional packages. It’s good to know the entire set of R packages accessible in your environment. To list all available packages in your local R session, use the installed.packages command:R> myLocalPackages <- row.names(installed.packages())R> myLocalPackagesTo access the list of available packages on the ORE database server from the ORE client, use the following embedded R syntax: R> myServerPackages <- ore.doEval(function() row.names(installed.packages()) R> myServerPackages 6. Troubleshooting Common ProblemsInstalling Older Versions of R packagesIf you immediately upgrade to the latest version of R, you will have no problem installing the most recent versions of R packages. However, if your version of R is older, some of the more recent package releases will not work and install.packages will generate a message such as: Warning message: In install.packages("arules") : package ‘arules’ is not availableThis is when you have to go to the Old sources link on the CRAN page for the arules package and determine which version is compatible with your version of R.Begin by determining what version of R you are using:$ R --versionOracle Distribution of R version 3.0.1 (--) -- "Good Sport" Copyright (C) The R Foundation for Statistical Computing Platform: x86_64-unknown-linux-gnu (64-bit)Given that R-3.0.1 was released May 16, 2013, any version of the arules package released after this date may work. Scanning the arules archive, we might try installing version 0.1.1-1, released in January of 2014:$ wget http://cran.r-project.org/src/contrib/Archive/arules/arules_1.1-1.tar.gz$ R CMD INSTALL arules_1.1-1.tar.gzFor use with ORE:$ ORE CMD INSTALL arules_1.1-1.tar.gzThe "package not available" error can also be thrown if the package you’re trying to install lives elsewhere, either another R package site, or it’s been removed from CRAN. A quick Google search usually leads to more information on the package’s location and status.Oracle R Enterprise is not in the R library pathOn Linux hosts, after installing the ORE server components, starting R, and attempting to load the ORE packages, you may receive the error:R> library(ORE)Error in library(ORE) : there is no package called ‘ORE’If you know the ORE packages have been installed and you receive this error, this is the result of not starting R with the ORE script. To resolve this problem, exit R and restart using the ORE script. After restarting R and ">running the command to load the ORE packages, you should not receive any errors.$ ORER> library(ORE)On Windows servers, the solution is to make the location of the ORE packages visible to R by adding them to the R library paths. To accomplish this, exit R, then add the following lines to the .Rprofile file. On Windows, the .Rprofile file is located in R\etc directory C:\Program Files\R\R-<version>\etc. Add the following lines:.libPaths("<path to $ORACLE_HOME>/R/library")The above line will tell R to include the R directory in the Oracle home as part of its search path. When you start R, the path above will be included, and future R package installations will also be saved to $ORACLE_HOME/R/library. This path should be writable by the user oracle, or the userid for the DBA tasked with installing R packages.Binary package compiled with different version of RBy default, R will install pre-compiled versions of packages if they are found. If the version of R under which the package was compiled does not match your installed version of R you will get an error message:Warning message: package ‘xxx’ was built under R version 3.0.0The solution is to download the package source and build it for your version of R.$ wget http://cran.r-project.org/src/contrib/Archive/arules/arules_1.1-1.tar.gz$ R CMD INSTALL arules_1.1-1.tar.gzFor use with ORE:$ ORE CMD INSTALL arules_1.1-1.tar.gzUnable to execute files in /tmp directoryBy default, R uses the /tmp directory to install packages. On security conscious machines, the /tmp directory is often marked as "noexec" in the /etc/fstab file. This means that no file under /tmp can ever be executed, and users who attempt to install R package will receive an error:ERROR: 'configure' exists but is not executable -- see the 'R Installation and Administration Manual’The solution is to set the TMP and TMPDIR environment variables to a location which R will use as the compilation directory. For example:$ mkdir <some path>/tmp$ export TMPDIR= <some path>/tmp$ export TMP= <some path>/tmpThis error typically appears on Linux client machines and not database servers, as Oracle Database writes to the value of the TMP environment variable for several tasks, including holding temporary files during database installation. 7. Creating your own R packageCreating your own package and submitting to CRAN is for advanced users, but it is not difficult. The procedure to follow, along with details of R's package system, is detailed in the Writing R Extensions manual.

Read the article

CodePlex Daily Summary for Monday, June 06, 2011

CodePlex Daily Summary for Monday, June 06, 2011Popular ReleasesSharepoint 2010 Diagnostic Log Compression: Sharepoint 2010 Diagnostic Log Compression v1.0: ====================== Requirements: Microsoft Sharepoint 2010 Foundation or Microsoft Sharepoint 2010 Server Release Version : 1.0PowerShell SQL Developer Tools: SQLDevTools_Module (folder) Version 0.1.0: SQLDevTools Module version 0.1.0(alpha release) Just unzip the file and move the folder "SQLDevTools" into your User "WindowsPowerShell\Modules" folder. "C:\Users\UserName...\Documents\WindowsPowerShell\Modules\SQLDevTools" Then, to load *module at either the PowerShell Console or ISE, use: Import-Module SQLDevTools To remove module use: Remove-Module SQLDevTools Again, you need have SQL Server 2008 (or above). or the standalone version of "SQL Server Management Studio 2008 R2 " installed ...ShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.SQL Compact Query Analyzer: Build 0.2.0.0: Beta build of SQL Compact Query Analyzer Features: - Execute SQL Queries against a SQL Server Compact Edition database - Easily edit the contents of the database - Supports SQLCE 3.5 and 4.0 Prerequisites: - .NET Framework 4.0Media Companion: MC 3.405b weekly: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! If you are upgrading from a version of MC before 3.404 then..... Due to an issue where the date added & the full genre information was not being read into the Movie cache, it is highly recommended that you perform a Rebuild Movies when first running this latest version. This will read in the information from the ...Babylon Toolkit: Babylon.Toolkit v1.0.4: Note about samples: In order to run samples, you need to configure visual studio to run them as an "Out-of-browser application". in order to do that, go to the property page of a sample project, go to the Debug tab, and check the "Out-of-browser application" radio. New features : New Effects BasicEffect3Lights (3 dir lights instead of 1 position light) CartoonEffect (work in progress) SkinnedEffect (with normal and specular map support) SplattingEffect (for multi-texturing with smooth ...SizeOnDisk: 1.0.8.2: With installerTerrariViewer: TerrariViewer v2.5: Added new items associated with Terraria v1.0.3 to the character editor. Fixed multiple bugs with Piggy Bank EditorySterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...patterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...Claims Based Identity & Access Control Guide: Release Candidate: Highlights of this release This is the release candidate drop of the new "Claims Identity Guide" edition. In this release you will find: All code samples, including all ACS v2: ACS as a Federation Provider - Showing authentication with LiveID, Google, etc. ACS as a FP with Multiple Business Partners. ACS and REST endpoints. Using a WP7 client with REST endpoints. All ACS specific chapters. Two new chapters on SharePoint (SSO and Federation) All revised v1 chapters We are now ...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.Caliburn Micro: WPF, Silverlight and WP7 made easy.: Caliburn.Micro v1.1 RTW: Download ContentsDebug and Release Assemblies Samples Changes.txt License.txt Release Highlights For WP7A new Tombstoning API based on ideas from Fluent NHibernate A new Launcher/Chooser API Strongly typed Navigation SimpleContainer included The full phone lifecycle is made easy to work with ie. we figure out whether your app is actually Resurrecting or just Continuing for you For WPFSupport for the Client Profile Better support for WinForms integration All PlatformsA power...VidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...AutoLoL: AutoLoL v2.0.1: - Fixed a small bug in Auto Login - Fixed the updaterEPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.9.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the server This version has been updated to .Net Framework 3.5 New Features Data Validation. PivotTables (Basic functionalliy...) Support for worksheet data sources. Column, Row, Page and Data fields. Date and Numeric grouping Build in styles. ...and more And some minor new features... Ranges Text-Property|Get the formated value AutofitColumns-method to set the column width from the content of the range LoadFromCollection-metho...jQuery ASP.Net MVC Controls: Version 1.4.0.0: Version 1.4.0.0 contains the following additions: Upgraded to MVC 3.0 Upgraded to jQuery 1.6.1 (Though the project supports all jQuery version from 1.4.x onwards) Upgraded to jqGrid 3.8 Better Razor View-Engine support Better Pager support, includes support for custom pagers Added jqGrid toolbar buttons support Search module refactored, with full suport for multiple filters and ordering And Code cleanup, bug-fixes and better controller configuration support.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all ...update is strongly recommended Known Issues: - some addin ribbon examples has a COM Register function with missing codebase entry(win32 registry) ...the problem is only affected to c# examples. fixed in latest source code. NetOffice\ReleaseTags\NetOffice Release 0.8.rar Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:...................Serviio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...New Projects.NET library for Audiogalaxy: AgNet is a .NET Client library for the Audiogalaxy APIAsuro scanner: A asuro programm which can recognize light values and perform predefined actions for them. This was realised for school project.AutoComplete.Net (for Asp.Net and Asp.Net MVC): AutoComplete.Net is a wrapper around the JQuery UI Autocomplete widget. It makes it easier to add autocomplete functionalities without having to bother with tons of javascript. Includes a WebControl for your Asp.Net web applications and a bunch of extension methods for your Asp.Net MVC web applications. Their purpose is to provide developers with an easy interface to the cool JQuery UI autocomplete Widget. It's developed in C#.AveSoft Advance Keylogger: Free and completely open source keystroke logging application, allows you to capture and record all keyboard input to file. Program is extremely small and lightweight, can run in a hidden mode, upload log file to specified web server. Due to open source nature, software is secure and transparent. Main Features Captures all keyboard input Caching and low level hooks uses minimal amount of CPU cycles Highly customizable Hidden mode Windows integration Log file...DDDProjector: DDDPrjector ?、DDD (Domain Driven Design: ????????) ?????????????????????????????????????、C# ???????????????????。 ???????????????????? C# ????????????????、??????????????????????????。 O/R ?????? NHibernate ??????。DogTouch: DogTouchEVMDOCS Reports: This project contain diploma of student VSTU. The project is devoted to automating the learning process at the university. Contains reports in OpenOfficeFidely - Search Query Compilation Framework: Fidely is a framework to implement a search query compiler that parses a search query string and builds up an expression tree (Expression<Func<T, bool>>) to filter a collection object. Fidely allows you to customize processes of parsing a query string and building up an expression tree, so you can create various search query compilers. The goal of this project is to make it easy to implement collection filtering features into your application.Frets: Frets is a library for creating and printing guitar chord diagrams. FuncLib: C# automatic differentiation library, transparent use with operator overloading, unlimited order of differentiation and unlimited number of variables, on-the-fly function compilation to IL code for very fast evaluation.ITAP: a management system for HCM IU's IELTS simulation examjQXB/M Expression Binder: JQ Expression Binder is a lightweigth framework (10 kbytes) for the association between javascript objects and HTML elements. Based on jQuery provides a natural and flexible way to process the data exchanged between client and server in a real WEB 2.0 paradigm. Using a few custom attributes to decorate yout HTML tags now you are enabled to take complete control over the managing of your business data directly inside yours web pages. Easy integration with ASP.NET WEBForm web applications, ...Log Processor: This software helps you to automatically analyze and process data in files (such as plain text logs, binary dumps...) based on : - plugins (for multiple input/output file types support) - plain text rules files (for a complete customization of the analysis needed) You'll then be able to easily produce stats reports from you application logs.MiniIndexer: A web application the demonstrates how to make a simple indexing search engine backed by a relational database. Monads: Monads helpers for .NET, Silverlight and Windows Phone 7.Movie Browser: Movie Browser helps collecting information from imdb and manage personal movie folders.Opc Configurable Xml Server/Service (OCXS): A Microsoft .NET 4.0 C# OPC XML Data Access 1.0 Server/ServiceSQL DAL: Data access layerTankMate: A simple Visual Basic application that lists and manages all your fish tanks. software initially designed to list fish tanks and enter their width/height/depth in inches and it display their volume in litres tank calculator was then expanded to alert if water needs changing after set interval of days number of days between changes is settable for each tank any sound file can be used for alert sounds has online update feature to keep it up to date Twoosh!: Simply, a fully-functional Twitter client for Windows... Twoosh makes it easier for Tweeple to Tweet. You'll no longer have to wait for the Twitter page to load or see the fail whale error page. It's developed in Visual Basic .NET 2008.WCF RIA Services for Azure Tables and SQL/Azure: Th project demos RIA services with POCO objects using two different back end data storage technologies, SQL/Azure and Azure Table Storage. The example shows a simple association between two tables - department and employee for read, insert and update operationsWindows Azure Storage Console Client: Windows Azure Storage Console ClientXNA 4.0 VirtualCompass: VirtualCompass is an incredibly simple and easy to use library for path finding in Microsoft's XNA 4.0 . It implements A* (A-star) path finding techniques to find the shortest path. This is an alpha status project. Limited testing and optimization thus far. Developed in C#.

Read the article

Why should main() be short?

- by Stargazer712

I've been programming for over 9 years, and according to the advice of my first programming teacher, I always keep my main() function extremely short. At first I had no idea why. I just obeyed without understanding, much to the delight of my professors. After gaining experience, I realized that if I designed my code correctly, having a short main() function just sortof happened. Writing modularized code and following the single responsibility principle allowed my code to be designed in "bunches", and main() served as nothing more than a catalyst to get the program running. Fast forward to a few weeks ago, I was looking at Python's souce code, and I found the main() function: /* Minimal main program -- everything is loaded from the library */ ... int main(int argc, char **argv) { ... return Py_Main(argc, argv); } Yay Python. Short main() function == Good code. Programming teachers were right. Wanting to look deeper, I took a look at Py_Main. In its entirety, it is defined as follows: /* Main program */ int Py_Main(int argc, char **argv) { int c; int sts; char *command = NULL; char *filename = NULL; char *module = NULL; FILE *fp = stdin; char *p; int unbuffered = 0; int skipfirstline = 0; int stdin_is_interactive = 0; int help = 0; int version = 0; int saw_unbuffered_flag = 0; PyCompilerFlags cf; cf.cf_flags = 0; orig_argc = argc; /* For Py_GetArgcArgv() */ orig_argv = argv; #ifdef RISCOS Py_RISCOSWimpFlag = 0; #endif PySys_ResetWarnOptions(); while ((c = _PyOS_GetOpt(argc, argv, PROGRAM_OPTS)) != EOF) { if (c == 'c') { /* -c is the last option; following arguments that look like options are left for the command to interpret. */ command = (char *)malloc(strlen(_PyOS_optarg) + 2); if (command == NULL) Py_FatalError( "not enough memory to copy -c argument"); strcpy(command, _PyOS_optarg); strcat(command, "\n"); break; } if (c == 'm') { /* -m is the last option; following arguments that look like options are left for the module to interpret. */ module = (char *)malloc(strlen(_PyOS_optarg) + 2); if (module == NULL) Py_FatalError( "not enough memory to copy -m argument"); strcpy(module, _PyOS_optarg); break; } switch (c) { case 'b': Py_BytesWarningFlag++; break; case 'd': Py_DebugFlag++; break; case '3': Py_Py3kWarningFlag++; if (!Py_DivisionWarningFlag) Py_DivisionWarningFlag = 1; break; case 'Q': if (strcmp(_PyOS_optarg, "old") == 0) { Py_DivisionWarningFlag = 0; break; } if (strcmp(_PyOS_optarg, "warn") == 0) { Py_DivisionWarningFlag = 1; break; } if (strcmp(_PyOS_optarg, "warnall") == 0) { Py_DivisionWarningFlag = 2; break; } if (strcmp(_PyOS_optarg, "new") == 0) { /* This only affects __main__ */ cf.cf_flags |= CO_FUTURE_DIVISION; /* And this tells the eval loop to treat BINARY_DIVIDE as BINARY_TRUE_DIVIDE */ _Py_QnewFlag = 1; break; } fprintf(stderr, "-Q option should be `-Qold', " "`-Qwarn', `-Qwarnall', or `-Qnew' only\n"); return usage(2, argv[0]); /* NOTREACHED */ case 'i': Py_InspectFlag++; Py_InteractiveFlag++; break; /* case 'J': reserved for Jython */ case 'O': Py_OptimizeFlag++; break; case 'B': Py_DontWriteBytecodeFlag++; break; case 's': Py_NoUserSiteDirectory++; break; case 'S': Py_NoSiteFlag++; break; case 'E': Py_IgnoreEnvironmentFlag++; break; case 't': Py_TabcheckFlag++; break; case 'u': unbuffered++; saw_unbuffered_flag = 1; break; case 'v': Py_VerboseFlag++; break; #ifdef RISCOS case 'w': Py_RISCOSWimpFlag = 1; break; #endif case 'x': skipfirstline = 1; break; /* case 'X': reserved for implementation-specific arguments */ case 'U': Py_UnicodeFlag++; break; case 'h': case '?': help++; break; case 'V': version++; break; case 'W': PySys_AddWarnOption(_PyOS_optarg); break; /* This space reserved for other options */ default: return usage(2, argv[0]); /*NOTREACHED*/ } } if (help) return usage(0, argv[0]); if (version) { fprintf(stderr, "Python %s\n", PY_VERSION); return 0; } if (Py_Py3kWarningFlag && !Py_TabcheckFlag) /* -3 implies -t (but not -tt) */ Py_TabcheckFlag = 1; if (!Py_InspectFlag && (p = Py_GETENV("PYTHONINSPECT")) && *p != '\0') Py_InspectFlag = 1; if (!saw_unbuffered_flag && (p = Py_GETENV("PYTHONUNBUFFERED")) && *p != '\0') unbuffered = 1; if (!Py_NoUserSiteDirectory && (p = Py_GETENV("PYTHONNOUSERSITE")) && *p != '\0') Py_NoUserSiteDirectory = 1; if ((p = Py_GETENV("PYTHONWARNINGS")) && *p != '\0') { char *buf, *warning; buf = (char *)malloc(strlen(p) + 1); if (buf == NULL) Py_FatalError( "not enough memory to copy PYTHONWARNINGS"); strcpy(buf, p); for (warning = strtok(buf, ","); warning != NULL; warning = strtok(NULL, ",")) PySys_AddWarnOption(warning); free(buf); } if (command == NULL && module == NULL && _PyOS_optind < argc && strcmp(argv[_PyOS_optind], "-") != 0) { #ifdef __VMS filename = decc$translate_vms(argv[_PyOS_optind]); if (filename == (char *)0 || filename == (char *)-1) filename = argv[_PyOS_optind]; #else filename = argv[_PyOS_optind]; #endif } stdin_is_interactive = Py_FdIsInteractive(stdin, (char *)0); if (unbuffered) { #if defined(MS_WINDOWS) || defined(__CYGWIN__) _setmode(fileno(stdin), O_BINARY); _setmode(fileno(stdout), O_BINARY); #endif #ifdef HAVE_SETVBUF setvbuf(stdin, (char *)NULL, _IONBF, BUFSIZ); setvbuf(stdout, (char *)NULL, _IONBF, BUFSIZ); setvbuf(stderr, (char *)NULL, _IONBF, BUFSIZ); #else /* !HAVE_SETVBUF */ setbuf(stdin, (char *)NULL); setbuf(stdout, (char *)NULL); setbuf(stderr, (char *)NULL); #endif /* !HAVE_SETVBUF */ } else if (Py_InteractiveFlag) { #ifdef MS_WINDOWS /* Doesn't have to have line-buffered -- use unbuffered */ /* Any set[v]buf(stdin, ...) screws up Tkinter :-( */ setvbuf(stdout, (char *)NULL, _IONBF, BUFSIZ); #else /* !MS_WINDOWS */ #ifdef HAVE_SETVBUF setvbuf(stdin, (char *)NULL, _IOLBF, BUFSIZ); setvbuf(stdout, (char *)NULL, _IOLBF, BUFSIZ); #endif /* HAVE_SETVBUF */ #endif /* !MS_WINDOWS */ /* Leave stderr alone - it should be unbuffered anyway. */ } #ifdef __VMS else { setvbuf (stdout, (char *)NULL, _IOLBF, BUFSIZ); } #endif /* __VMS */ #ifdef __APPLE__ /* On MacOS X, when the Python interpreter is embedded in an application bundle, it gets executed by a bootstrapping script that does os.execve() with an argv[0] that's different from the actual Python executable. This is needed to keep the Finder happy, or rather, to work around Apple's overly strict requirements of the process name. However, we still need a usable sys.executable, so the actual executable path is passed in an environment variable. See Lib/plat-mac/bundlebuiler.py for details about the bootstrap script. */ if ((p = Py_GETENV("PYTHONEXECUTABLE")) && *p != '\0') Py_SetProgramName(p); else Py_SetProgramName(argv[0]); #else Py_SetProgramName(argv[0]); #endif Py_Initialize(); if (Py_VerboseFlag || (command == NULL && filename == NULL && module == NULL && stdin_is_interactive)) { fprintf(stderr, "Python %s on %s\n", Py_GetVersion(), Py_GetPlatform()); if (!Py_NoSiteFlag) fprintf(stderr, "%s\n", COPYRIGHT); } if (command != NULL) { /* Backup _PyOS_optind and force sys.argv[0] = '-c' */ _PyOS_optind--; argv[_PyOS_optind] = "-c"; } if (module != NULL) { /* Backup _PyOS_optind and force sys.argv[0] = '-c' so that PySys_SetArgv correctly sets sys.path[0] to '' rather than looking for a file called "-m". See tracker issue #8202 for details. */ _PyOS_optind--; argv[_PyOS_optind] = "-c"; } PySys_SetArgv(argc-_PyOS_optind, argv+_PyOS_optind); if ((Py_InspectFlag || (command == NULL && filename == NULL && module == NULL)) && isatty(fileno(stdin))) { PyObject *v; v = PyImport_ImportModule("readline"); if (v == NULL) PyErr_Clear(); else Py_DECREF(v); } if (command) { sts = PyRun_SimpleStringFlags(command, &cf) != 0; free(command); } else if (module) { sts = RunModule(module, 1); free(module); } else { if (filename == NULL && stdin_is_interactive) { Py_InspectFlag = 0; /* do exit on SystemExit */ RunStartupFile(&cf); } /* XXX */ sts = -1; /* keep track of whether we've already run __main__ */ if (filename != NULL) { sts = RunMainFromImporter(filename); } if (sts==-1 && filename!=NULL) { if ((fp = fopen(filename, "r")) == NULL) { fprintf(stderr, "%s: can't open file '%s': [Errno %d] %s\n", argv[0], filename, errno, strerror(errno)); return 2; } else if (skipfirstline) { int ch; /* Push back first newline so line numbers remain the same */ while ((ch = getc(fp)) != EOF) { if (ch == '\n') { (void)ungetc(ch, fp); break; } } } { /* XXX: does this work on Win/Win64? (see posix_fstat) */ struct stat sb; if (fstat(fileno(fp), &sb) == 0 && S_ISDIR(sb.st_mode)) { fprintf(stderr, "%s: '%s' is a directory, cannot continue\n", argv[0], filename); fclose(fp); return 1; } } } if (sts==-1) { /* call pending calls like signal handlers (SIGINT) */ if (Py_MakePendingCalls() == -1) { PyErr_Print(); sts = 1; } else { sts = PyRun_AnyFileExFlags( fp, filename == NULL ? "<stdin>" : filename, filename != NULL, &cf) != 0; } } } /* Check this environment variable at the end, to give programs the * opportunity to set it from Python. */ if (!Py_InspectFlag && (p = Py_GETENV("PYTHONINSPECT")) && *p != '\0') { Py_InspectFlag = 1; } if (Py_InspectFlag && stdin_is_interactive && (filename != NULL || command != NULL || module != NULL)) { Py_InspectFlag = 0; /* XXX */ sts = PyRun_AnyFileFlags(stdin, "<stdin>", &cf) != 0; } Py_Finalize(); #ifdef RISCOS if (Py_RISCOSWimpFlag) fprintf(stderr, "\x0cq\x0c"); /* make frontend quit */ #endif #ifdef __INSURE__ /* Insure++ is a memory analysis tool that aids in discovering * memory leaks and other memory problems. On Python exit, the * interned string dictionary is flagged as being in use at exit * (which it is). Under normal circumstances, this is fine because * the memory will be automatically reclaimed by the system. Under * memory debugging, it's a huge source of useless noise, so we * trade off slower shutdown for less distraction in the memory * reports. -baw */ _Py_ReleaseInternedStrings(); #endif /* __INSURE__ */ return sts; } Good God Almighty...it is big enough to sink the Titanic. It seems as though Python did the "Intro to Programming 101" trick and just moved all of main()'s code to a different function called it something very similar to "main". Here's my question: Is this code terribly written, or are there other reasons reasons to have a short main function? As it stands right now, I see absolutely no difference between doing this and just moving the code in Py_Main() back into main(). Am I wrong in thinking this?

Read the article

Allowing connections initiated from outside

- by Mark S. Rasmussen

I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

Read the article

CodePlex Daily Summary for Friday, January 28, 2011

CodePlex Daily Summary for Friday, January 28, 2011Popular ReleasesVFPX: VFP2C32 2.0.0.8 Release Candidate: This release includes several bugfixes, new functions and finally a CHM help file for the complete library.EnhSim: EnhSim 2.3.3 ALPHA: 2.3.3 ALPHAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added back in a p...DB>doc for Microsoft SQL Server: 1.0.0.0: Initial release Supported output HTML WikiPlex markup Raw XML Supported objects Tables Primary Keys Foreign Keys ViewsmojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Office Web.UI: Alpha preview: This is the first alpha release. Very exciting moment... This download is just the demo application : "Contoso backoffice Web App". No source included for the moment, just the app, for testing purposes and for feedbacks !! This package includes a set of official MS Office icons (143 png 16x16 and 132 png 32x32) to really make a great app ! Please rate and give feedback ThanksParallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.Catel - WPF and Silverlight MVVM library: 1.1: (+) Styles can now be changed dynamically, see Examples application for a how-to (+) ViewModelBase class now have a constructor that allows services injection (+) ViewModelBase services can now be configured by IoC (via Microsoft.Unity) (+) All ViewModelBase services now have a unit test implementation (+) Added IProcessService to run processes from a viewmodel with directly using the process class (which makes it easier to unit test view models) (*) If the HasErrors property of DataObjec...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...Kooboo CMS: Kooboo CMS 3.0 CTP: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL, RavenDB and SQLCE. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder to enable...UOB & ME: UOB ME 2.6: UOB ME 2.6????: ???? V1.0: ???? V1.0 ??Password Generator: 2.2: Parallel password generation Password strength calculation ( Same method used by Microsoft here : https://www.microsoft.com/protect/fraud/passwords/checker.aspx ) Minor code refactoringVisual Studio 2010 Architecture Tooling Guidance: Spanish - Architecture Guidance: Francisco Fagas http://geeks.ms/blogs/ffagas, Microsoft Most Valuable Professional (MVP), localized the Visual Studio 2010 Quick Reference Guidance for the Spanish communities, based on http://vsarchitectureguide.codeplex.com/releases/view/47828. Release Notes The guidance is available in a xps-only (default) or complete package. The complete package contains the files in xps, pdf and Office 2007 formats. 2011-01-24 Publish version 1.0 of the Spanish localized bits.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager the html generation has been optimized, the html page size is much smaller nowFacebook Graph Toolkit: Facebook Graph Toolkit 0.6: new Facebook Graph objects: Application, Page, Post, Comment Improved Intellisense documentation new Graph Api connections: albums, photos, posts, feed, home, friends JSON Toolkit upgraded to version 0.9 (beta release) with bug fixes and new features bug fixed: error when handling empty JSON arrays bug fixed: error when handling JSON array with square or large brackets in the message bug fixed: error when handling JSON obejcts with double quotation in the message bug fixed: erro...Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-01-23: Code samples for Visual Studio 2008MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (3): Instructions for installation: http://www.galasoft.ch/mvvm/installing/manually/ Includes the hotfix templates for Windows Phone 7 development. This is only relevant if you didn't already install the hotfix described at http://blog.galasoft.ch/archive/2010/07/22/mvvm-light-hotfix-for-windows-phone-7-developer-tools-beta.aspx.Community Forums NNTP bridge: Community Forums NNTP Bridge V42: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has added some features / bugfixes: Bugfix: Decoding of Subject now also supports multi-line subjects (occurs only if you have very long subjects with non-ASCII characters)Minecraft Tools: Minecraft Topographical Survey 1.3: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds automatic block list updates, so MTS will recognize blocks added in game updates properly rather than drawing them in bright pink. New in this version of MTS: Support for all new blocks added since the Halloween update Auto-update of blockcolors.xml to support future game updates A splash screen that shows while the program searches for upd...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14996.000: New Features: ============= This release is just compiled against the latest release of JetBrains ReSharper 5.1.1766.4 Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes...New ProjectsAgilErp: AgilErp is a .NET OpenSource ERP - System developed in C# using WPF, WCF ,Entity Framework, MS-SQL-Server and MVVM. Angel Eye: 3d Game for the new generation AWWWE Browser: AWWWE Browser. (Pronounced "awe".) Aural World Wide Web Everywhere. 1) An aural browser. It talks and listens to you and you talk and listen to it. 2) A VUI for normal HTML web sites. It lets regular web sites talk and listen to you while you talk and listen to them.BitLocker Wrapper Library: The BDE Wrapper library allows .NET Developers to quickly use the WMI BitLocker provider without having to learn the complex methods and operation of the WMI classes.CRM8000: CRM8000????????????????DSM Hub for WP7: Implements a light version of the DSM tools for WP7. Currently, most of the effort is on the audio station.File Downloader: This application checks a Gmail account regularly for mail containing URLs. Once a URL is found, its content is downloaded and sent as a reply message with the file as an attachment. Intended usage: - Download IEEE articles as PDF when you're not in a authenticated network.Folder Space Quota: This component return Quotas Disk Space used for each folders and subfolders in a given directory. Results are returned with a graphic percent bar. Another Tab give access to this directory tree, indicating the size of each file and allows previewing them in a "LightBox" window. IDK: Every other month, IDK asks people to come up with awesome ideas for new programs and webpages. After the end of the month, IDKs developers have another month to create one of the top rated websites or applications. Got a great idea for a new app? Let IDK build it for you.Interop 2: Microformats for Azure Cloud with OData-InterfacejSPoint - JavaScript Library for SharePoint: JavaScript for SharePoint (jSPoint) is a library that help SharePoint developers to create rich,dynamic, & powerfull pages for SharePoint sites.MVVM T4: T4 Templates for generating view models, and views for WPF, Silverlight, Windows Phone using T4 Toolbox and MVVM LightNumericUpDown Control for WPF: A basic NumericUpDown Control for WPF that mirrors all the most used functions of the WinForms NumericUpDown Control and looks similar to itOData for IQToolkit: OData for IQToolkit, converts OData expressions into a usable expressions for IQToolkit providers.PLATO: PALTO is micro plate processing pipeline and supports enzymes and metabolites. PLATO was developed at INRA-Bordeaux and is an evolution of the EnzymeLaborTool developed at the Max-Planck Institute of Molecular Plant Physiology.Purdue CS 490: Model-based testing of ADO.NET: Five students from Purdue University will develop model-based tests for an aspect of ADO.NET during the Spring 2011 semester. We'll be using C# and Spec Explorer, among other tools.Replace in multiple Office 2010 documents: This program replaces a text string in multiple office 2010 documents (Word, Excel, PowerPoint). It is developed in VB.NET and new code for additional products is welcome. SearchEngine: A Website Search Engine and Crawler.Set Custom Currency Symbol: This utility enables you to set/register custom currency symbols for the .NET FrameworkSimple C# Email Templates: A really simple, really easy to use class for sending email templates. Reads any file from disk (think ".txt" or ".html") and matches custom tokens with the values you supply, in both the message body and the subject line. Supports multiple CC and BCC addresses.SimpleBasicAuthentication: SimpleBasicAuthentication makes it easier for developers to build a website with basic authentication using the credentials from just a text file. You'll no longer have to create new users on the system just to let them log in to the website or service. It's developed in C# 4.0.SpecsFor - Yet Another BDD Framework For .NET: SpecsFor is another Behavior-Driven Development framework that focuses on ease of use for *developers* by minimizing testing friction. Square: Custom SharePoint MyProfile PageSynchrolist workflow: Sharepoint workflow whitch perform automatic synchronisation between two lists in the same collection. Usefull for automatic translation.TFS Aggregator: This server side plugin for TFS 2010 enables dynamic calculation of field values in TFS. (For example: Dev work + Test Work = Total Work) Supports same work item and parent-child links. Also has support for aggregating string values (ie Children are Done so the parent is Done)Tinchant: My nice projectZebra_Image, a lightweight image manipulation library written in PHP: This is a compact (one-file only), lightweight, object-oriented image manipulation library written in and for PHP, that provides methods for performing several types of image manipulation operations. It doesn’t require any external libraries other than the GD2 extension.Zebra_Pagination, a generic pagination class written in PHP: A generic pagination class that automatically generates navigation links given the total number of items and the number of items per page.Zebra_Session, a wrapper for PHP’s default session handler, using MySQL: Zebra_Session is a PHP class that acts as a wrapper for PHP’s default session handling functions but instead of storing session data in flat files it stores them in a MySQL database, thus providing both better security and better performance.

Read the article

Windows 7 explorer always crashes, opens small "Personalized Settings" window

- by Ian Sellar

My Windows 7 desktop PC, built by me, started acting very weird in the last couple of days. I use it quite often, about half of the time through TeamViewer. Explorer would crash and restart randomly, almost always through TeamViewer. This made me suspect that TeamViewer was the problem but I have reproduced it with and without TeamViewer several times. The only way I can seem to get the problem not to occur is by booting into Safe Mode. I have used CCleaner and Malwarebytes to make sure it wasn't a registry error or malware causing the problem, and I have tried the fix in the seemly related issue here as well every other fix I have found online including removing security updates KB980408 and KB2926765 as well as using "sfc /scannow" and a bunch of other things I can't remember. More recently when I try to start explorer it is popping up a small window that says "Personalized Settings" on the top, but is completely empty and crashes instantly. The only way I can get it to disappear is to kill the explorer.exe process. I wish I could take a screenshot but I can't seem to open paint or even find the exe. I have tried restarting it, I have tried starting it while the personalized settings window was open. I have come up with two lists of processes the first is the list of active processes when I boot into safe mode and explorer seems to work fine. The second is the list of processes that I can narrow it down to in normal boot and still replicate the problem. There is one process that I can't seem to close. NisSrv.exe which is describes as "Microsoft Network Realtime Inspection Service". When I try to close the process NisSrv.exe it says "The operation could not be completed. Access is denied." When I try to close the related service it gives the same message. Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 2,660 K smss.exe 304 Services 0 1,196 K csrss.exe 408 Services 0 4,156 K wininit.exe 444 Services 0 4,608 K csrss.exe 452 Console 1 8,700 K services.exe 492 Services 0 7,700 K winlogon.exe 524 Console 1 5,756 K lsass.exe 536 Services 0 10,644 K lsm.exe 544 Services 0 4,316 K svchost.exe 652 Services 0 8,976 K MsMpEng.exe 804 Services 0 40,696 K explorer.exe 1332 Console 1 85,220 K ctfmon.exe 1376 Console 1 3,680 K dllhost.exe 1624 Console 1 8,656 K chrome.exe 1408 Console 1 98,504 K WmiPrvSE.exe 2352 Services 0 6,472 K chrome.exe 1744 Console 1 65,116 K taskmgr.exe 372 Console 1 14,948 K cmd.exe 2776 Console 1 2,960 K conhost.exe 1816 Console 1 3,580 K tasklist.exe 2308 Console 1 5,868 K And the list of processes I have narrowed it down to. Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 2,808 K smss.exe 316 Services 0 1,216 K csrss.exe 484 Services 0 4,532 K wininit.exe 596 Services 0 4,604 K csrss.exe 604 Console 1 23,676 K services.exe 652 Services 0 11,344 K lsass.exe 668 Services 0 12,692 K lsm.exe 676 Services 0 4,464 K MsMpEng.exe 972 Services 0 68,436 K winlogon.exe 168 Console 1 7,784 K svchost.exe 496 Services 0 19,140 K NisSrv.exe 3176 Services 0 808 K svchost.exe 1684 Services 0 11,260 K taskmgr.exe 4524 Console 1 20,696 K cmd.exe 4764 Console 1 7,224 K conhost.exe 4772 Console 1 6,916 K sublime_text.exe 2340 Console 1 45,012 K dllhost.exe 4476 Console 1 8,736 K tasklist.exe 3796 Console 1 5,768 K WmiPrvSE.exe 1768 Services 0 6,344 K Here is the event data xml from event viewer for the error I am getting. <EventData> <Data>explorer.exe</Data> <Data>6.1.7601.17567</Data> <Data>4d672ee4</Data> <Data>vrfcore.dll</Data> <Data>6.3.9600.16384</Data> <Data>5215f8f5</Data> <Data>80000003</Data> <Data>0000000000003a00</Data> <Data>12e4</Data> <Data>01cfb84fa70f89dc</Data> <Data>C:\Windows\system32\explorer.exe</Data> <Data>C:\Windows\SYSTEM32\vrfcore.dll</Data> <Data>e5957093-2442-11e4-9f8a-94de806ed9cb</Data> </EventData> I was looking through the eventvwr log again and I found this, possibly related <EventData> <Data>runonce.exe</Data> <Data>6.1.7601.17514</Data> <Data>4ce7a253</Data> <Data>MSVCR100.dll</Data> <Data>10.0.40219.325</Data> <Data>4df2bcac</Data> <Data>c0000005</Data> <Data>000000000003c145</Data> <Data>670</Data> <Data>01cfb8dabbd85942</Data> <Data>C:\Windows\system32\runonce.exe</Data> <Data>C:\Windows\system32\MSVCR100.dll</Data> <Data>fa6f82b9-24cd-11e4-80a8-94de806ed9cb</Data> </EventData> And the general error details Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4 Faulting module name: vrfcore.dll, version: 6.3.9600.16384, time stamp: 0x5215f8f5 Exception code: 0x80000003 Fault offset: 0x0000000000003a00 Faulting process id: 0xc38 Faulting application start time: 0x01cfb84e5e852c5f Faulting application path: C:\Windows\Explorer.EXE Faulting module path: C:\Windows\SYSTEM32\vrfcore.dll Report Id: 9dc19e6d-2441-11e4-9f8a-94de806ed9cb Another probably unrelated error that I seem to be getting pretty often. Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. My explorer tab in Autoruns seen below along with the error when I try to uncheck something. I should add that I seem to be able to disable shell extensions with ShellExView but I still can't get explorer to start correctly. EXPLORER SHELL UPDATE - See screenshot below I can access the explorer right click menu through a file manager I downloaded called NexusFile, but still no luck starting explorer. Another round of errors that I am getting regarding Windows Search Service The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index. Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) followed by The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt. Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801 and The plug-in in <Search.JetPropStore> cannot be initialized. Context: Windows Application, SystemIndex Catalog Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) and The gatherer object cannot be initialized. Context: Windows Application, SystemIndex Catalog Details: The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801) and The Windows Search Service cannot load the property store information. Context: Windows Application, SystemIndex Catalog Details: The content index database is corrupt. (HRESULT : 0xc0041800) (0xc0041800) WER Log http://pastebin.com/WXKGDT4Q I'll add information as I remember it or people request it.

Read the article

CodePlex Daily Summary for Tuesday, November 22, 2011

CodePlex Daily Summary for Tuesday, November 22, 2011Popular ReleasesDeveloper Team Article System Management: DTASM v1.3: ?? ??? ???? 3 ????? ???? ???? ????? ??? : - ????? ?????? ????? ???? ?? ??? ???? ????? ?? ??? ? ?? ???? ?????? ???? ?? ???? ????? ?? . - ??? ?? ???? ????? ???? ????? ???? ???? ?? ????? , ?????? ????? ????? ?? ??? . - ??? ??????? ??? ??? ???? ?? ????? ????? ????? .VideoLan DotNet for WinForm, WPF & Silverlight 5: VideoLan DotNet for WinForm, WPF, SL5 - 2011.11.22: The new version contains Silverlight 5 library: Vlc.DotNet.Silverlight. A sample could be tested here The new version add and correct many features : Correction : Reinitialize some variables Deprecate : Logging API, since VLC 1.2 (08/20/2011) Add subitem in LocationMedia (for Youtube videos, ...) Update Wpf sample to use Youtube videos Many others correctionsSharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...Anno 2070 Assistant: v0.1.0 (STABLE): Version 0.1.0 Features Production Chains Eco Production Chains (Complete) Tycoon Production Chains (Disabled - Incomplete) Tech Production Chains (Disabled - Incomplete) Supply (Disabled - Incomplete) Calculator (Disabled - Incomplete) Building Layouts Eco Building Layouts (Complete) Tycoon Building Layouts (Disabled - Incomplete) Tech Building Layouts (Disabled - Incomplete) Credits (Complete)Free SharePoint 2010 Sites Templates: SharePoint Server 2010 Sites Templates: here is the list of sites templates to be downloadedVsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 30 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 30 (beta)New: Support for TortoiseSVN 1.7 added. (the download contains both setups, for TortoiseSVN 1.6 and 1.7) New: OpenModifiedDocumentDialog displays conflicted files now. New: OpenModifiedDocument allows to group items by changelist now. Fix: OpenModifiedDocumentDialog caused Visual Studio 2010 to freeze sometimes. Fix: The installer didn...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.30: Highlight features & improvements: • Performance optimization. • Back in stock notifications. • Product special price support. • Catalog mode (based on customer role) To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).WPF Converters: WPF Converters V1.2.0.0: support for enumerations, value types, and reference types in the expression converter's equality operators the expression converter now handles DependencyProperty.UnsetValue as argument values correctly (#4062) StyleCop conformance (more or less)Json.NET: Json.NET 4.0 Release 4: Change - JsonTextReader.Culture is now CultureInfo.InvariantCulture by default Change - KeyValurPairConverter no longer cares about the order of the key and value properties Change - Time zone conversions now use new TimeZoneInfo instead of TimeZone Fix - Fixed boolean values sometimes being capitalized when converting to XML Fix - Fixed error when deserializing ConcurrentDictionary Fix - Fixed serializing some Uris returning the incorrect value Fix - Fixed occasional error when...Media Companion: MC 3.423b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Replaced 'Rebuild' with 'Refresh' throughout entire code. Rebuild will now be known as Refresh. mc_com.exe has been fully updated TV Show Resolutions... Resolved issue #206 - having to hit save twice when updating runtime manually Shrunk cache size and lowered loading times f...Delta Engine: Delta Engine Beta Preview v0.9.1: v0.9.1 beta release with lots of refactoring, fixes, new samples and support for iOS, Android and WP7 (you need a Marketplace account however). If you want a binary release for the games (like v0.9.0), just say so in the Forum or here and we will quickly prepare one. It is just not much different from v0.9.0, so I left it out this time. See http://DeltaEngine.net/Wiki.Roadmap for details.SharpMap - Geospatial Application Framework for the CLR: SharpMap-0.9-AnyCPU-Trunk-2011.11.17: This is a build of SharpMap from the 0.9 development trunk as per 2011-11-17 For most applications the AnyCPU release is the recommended, but in case you need an x86 build that is included to. For some dataproviders (GDAL/OGR, SqLite, PostGis) you need to also referense the SharpMap.Extensions assembly For SqlServer Spatial you need to reference the SharpMap.SqlServerSpatial assemblyAJAX Control Toolkit: November 2011 Release: AJAX Control Toolkit Release Notes - November 2011 Release Version 51116November 2011 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 - Binary – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 - Binary – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found h...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.36: Fix for issue #16908: string literals containing ASP.NET replacement syntax fail if the ASP.NET code contains the same character as the string literal delimiter. Also, we shouldn't be changing the delimiter for those literals or combining them with other literals; the developer may have specifically chosen the delimiter used because of possible content inserted by ASP.NET code. This logic is normally off; turn it on via the -aspnet command-line flag (or the Code.Settings.AllowEmbeddedAspNetBl...MVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.7: Reworked API to be more consistent. See Supported formats table. Added some more helper methods - e.g. OpenEntryStream (RarArchive/RarReader does not support this) Fixed up testsSilverlight Toolkit: Windows Phone Toolkit - Nov 2011 (7.1 SDK): This release is coming soon! What's new ListPicker once again works in a ScrollViewer LongListSelector bug fixes around OutOfRange exceptions, wrong ordering of items, grouping issues, and scrolling events. ItemTuple is now refactored to be the public type LongListSelectorItem to provide users better access to the values in selection changed handlers. PerformanceProgressBar binding fix for IsIndeterminate (item 9767 and others) There is no longer a GestureListener dependency with the C...New ProjectsAndrecorder: Andrecorder???Android???????,???????????????????,????????????????,????????!Android Tree Bulletin: Android bulletin reader in tree format.Bài t?p l?p môn HCI: Name: Ph?n m?m qu?n lý thu h?c phí tru?ng d?i h?c Công Nghi?p Hà N?i Basic Grid Collision sample in XNA: This project shows how to implement a basic grid collision in XNA. The project uses the XNA 4.0 framework and C#Club Manager: Club Manager is a web site for managing sport clubs / teams.Create email with encrypt text implement TEA encryption and Web Service: RahaTEA Mail is an application to send messages in secret. These applications implement TEA encryption and web serviceCRM 2011 Layers: Several .net layers to customize CRM 2011CTEF: China Tomorrow Education Foundation websitedns?????: ??c#???dns?????。????????，???????，??????。EAF: Extensibility Application FrameworkEnergy SBA: In order to compete with large companies for Federal contracts, small business need information. This application seeks to show standard methods of using remote APIs to integrate information into a Metro interface using services provided by the Small Business Administration (SBA)EPiOptimiser - Scan your EPiServer configuration to optimise start up times: EPiScanner scans your EPiServer configuration to optimise start ups by generating a recommended exclude list of assemblies to include in EPiServer framework config. It can be used on command line, as a custom build task or integrated into Visual Studio as an external tool.FreeIDS - Free Intrusion Detection System: Don't want someone to use your computer? Don't want to use a system password? Want to see when someone accessed your computer? Time/Date? FreeIDS is it!FtpServerAdministrator: FtpServerAdministrator makes it easier to administer some ftp server by code, although it can only be used for FileZilla server now. It's developed in C#.GreenPoint Online: Tools and components that help you customize an Office 365 / SharePoint Online Environment.HCC C# Workshop: This project contains the code for the exercises of the HCC C# WorkshopKsigDo - Real time view model syncing across user screens: KsigDo show real time view model syncing across user screens - using ASP.NET, Knockout and SignalR. Real time data syncing across user views *was* hard, especially in web applications. Most of the time, the second user needs to refresh the screen, to see the changes made by first user, or we need to implement some long polling that fetches the data and does the update manually. Now, with SignalR and Knockout, ASP.NET developers can take advantage of view model syncing across users, that...lineseven: ???????????????。Mail Size Labeler for GMail: A small utility that labels large e-mails on your gmail account. This utility scan you gmail account, and adds labels to large e-mail so you can clean your mailbox and free space. The labels this utility adds are: Size 1M-2M Size 2M-5M Size 5M-10M Size 10M-15M Size 15M plus Note: a single e-mail thread may get multiple labels if different e-mails of the thread fit different filters.MathService: Complex digits, standart class extentions etc.MyGameProject: gamesMySQL Connect 2 ASP.NET: Example project to show how to connect MySQL database to ASP.NET web project. IDE: Visual Studio 2010 Pro Programming language: C# Detailed information in the article here: http://epavlov.net/blog/2011/11/13/connect-to-mysql-in-visual-studio/ nl: Nutri Leaf Devomr.event.js: Simple js event injecterPastebin4DotNet: This project is an example of how to consume an API, in this case I consummed the Pastebin API.Pomelo: Pomelo is a website example.QuickDevFrameWork: ????????,??,??,????,ioc ?????postsharp?aopReadable Passphrase Generator: Generates passphrases which are (mostly) grammatically correct but nonsensical. These are easy to remember but difficult to guess (for humans or computers). Developed in C# with a KeePass plugin, console app and public API.Rosyama.ru for Windows Phone 7: ?????????? Windows Phone 7 ??? ???????? ???????? ?? ???? rosyama.ru. ?????????? ??????? ?????????? ? ???????? ????????? ???????. SimpleBatch: As the name suggests, this is a simple batch framework allowing you to define batch jobs in XML format. Thus far, contains a basic selection of processors such as the following; File Email SQL (SQL Server Client) SharePoint Document Library Custom ProcessorSite de Notícias: Projeto de faculdade que consiste na criação de um site de notícias.SPWikiProvisioning: Create update and delete SharePoint wiki pages using feature activation and deactivation handlers.SVN Automated Control With C#: I Created this libaray because I need to control Tortoise SVN automactically with out an interface for my own build server and could not find any resuilts on google to achive this task so I went about creating this libaray which dos most of the task's that I needed. I round that you could control SVN by command line so using that as my basic idear I went about coding the most common commands for SVN most of the commads are done but not all. if you like this libaray then please use it we...TremplinCMS: TremplinCMS is a CMS framework for ASP .NET 4.vlu0206sms: SMSMaker by team0206 developingWCF DataService RequestStream Access on webInvoke HTTP POST: This library provides access to the message body request stream of a WCF Data Service (formerly ADO.NET Data Service), which is not possible with the original WCF Data Service class. You are enabled passing data (e.g. Json, files) via HTTP POST to the request body. It uses the operation context (DbContext) provided by the DataService<T> class to get access to the resquest stream.WebOS: Welcome to join us to build our os projectWp7StarterDantas: Iniciando com Wp7WpfCollaborative3D: WpfCollaborative3DXNA Content Preprocessor: The XNA Content Preprocessor allows you to compile all of your XNA assets outside of your normal XNA project. This means more time building your game or app instead of your content.

Read the article

Testing Entity Framework applications, pt. 3: NDbUnit

- by Thomas Weller

This is the third of a three part series that deals with the issue of faking test data in the context of a legacy app that was built with Microsoft's Entity Framework (EF) on top of an MS SQL Server database – a scenario that can be found very often. Please read the first part for a description of the sample application, a discussion of some general aspects of unit testing in a database context, and of some more specific aspects of the here discussed EF/MSSQL combination. Lately, I wondered how you would ‘mock’ the data layer of a legacy application, when this data layer is made up of an MS Entity Framework (EF) model in combination with a MS SQL Server database. Originally, this question came up in the context of how you could enable higher-level integration tests (automated UI tests, to be exact) for a legacy application that uses this EF/MSSQL combo as its data store mechanism – a not so uncommon scenario. The question sparked my interest, and I decided to dive into it somewhat deeper. What I've found out is, in short, that it's not very easy and straightforward to do it – but it can be done. The two strategies that are best suited to fit the bill involve using either the (commercial) Typemock Isolator tool or the (free) NDbUnit framework. The use of Typemock was discussed in the previous post, this post now will present the NDbUnit approach... NDbUnit is an Apache 2.0-licensed open-source project, and like so many other Nxxx tools and frameworks, it is basically a C#/.NET port of the corresponding Java version (DbUnit namely). In short, it helps you in flexibly managing the state of a database in that it lets you easily perform basic operations (like e.g. Insert, Delete, Refresh, DeleteAll) against your database and, most notably, lets you feed it with data from external xml files. Let's have a look at how things can be done with the help of this framework. Preparing the test data Compared to Typemock, using NDbUnit implies a totally different approach to meet our testing needs. So the here described testing scenario requires an instance of an SQL Server database in operation, and it also means that the Entity Framework model that sits on top of this database is completely unaffected. First things first: For its interactions with the database, NDbUnit relies on a .NET Dataset xsd file. See Step 1 of their Quick Start Guide for a description of how to create one. With this prerequisite in place then, the test fixture's setup code could look something like this: [TestFixture, TestsOn(typeof(PersonRepository))] [Metadata("NDbUnit Quickstart URL", "http://code.google.com/p/ndbunit/wiki/QuickStartGuide")] [Description("Uses the NDbUnit library to provide test data to a local database.")] public class PersonRepositoryFixture { #region Constants private const string XmlSchema = @"..\..\TestData\School.xsd"; #endregion // Constants #region Fields private SchoolEntities _schoolContext; private PersonRepository _personRepository; private INDbUnitTest _database; #endregion // Fields #region Setup/TearDown [FixtureSetUp] public void FixtureSetUp() { var connectionString = ConfigurationManager.ConnectionStrings["School_Test"].ConnectionString; _database = new SqlDbUnitTest(connectionString); _database.ReadXmlSchema(XmlSchema); var entityConnectionStringBuilder = new EntityConnectionStringBuilder { Metadata = "res://*/School.csdl|res://*/School.ssdl|res://*/School.msl", Provider = "System.Data.SqlClient", ProviderConnectionString = connectionString }; _schoolContext = new SchoolEntities(entityConnectionStringBuilder.ConnectionString); _personRepository = new PersonRepository(this._schoolContext); } [FixtureTearDown] public void FixtureTearDown() { _database.PerformDbOperation(DbOperationFlag.DeleteAll); _schoolContext.Dispose(); } ... As you can see, there is slightly more fixture setup code involved if your tests are using NDbUnit to provide the test data: Because we're dealing with a physical database instance here, we first need to pick up the test-specific connection string from the test assemblies' App.config, then initialize an NDbUnit helper object with this connection along with the provided xsd file, and also set up the SchoolEntities and the PersonRepository instances accordingly. The _database field (an instance of the INdUnitTest interface) will be our single access point to the underlying database: We use it to perform all the required operations against the data store. To have a flexible mechanism to easily insert data into the database, we can write a helper method like this: private void InsertTestData(params string[] dataFileNames) { _database.PerformDbOperation(DbOperationFlag.DeleteAll); if (dataFileNames == null) { return; } try { foreach (string fileName in dataFileNames) { if (!File.Exists(fileName)) { throw new FileNotFoundException(Path.GetFullPath(fileName)); } _database.ReadXml(fileName); _database.PerformDbOperation(DbOperationFlag.InsertIdentity); } } catch { _database.PerformDbOperation(DbOperationFlag.DeleteAll); throw; } } This lets us easily insert test data from xml files, in any number and in a controlled order (which is important because we eventually must fulfill referential constraints, or we must account for some other stuff that imposes a specific ordering on data insertion). Again, as with Typemock, I won't go into API details here. - Unfortunately, there isn't too much documentation for NDbUnit anyway, other than the already mentioned Quick Start Guide (and the source code itself, of course) - a not so uncommon problem with smaller Open Source Projects. Last not least, we need to provide the required test data in xml form. A snippet for data from the People table might look like this, for example: <?xml version="1.0" encoding="utf-8" ?> <School xmlns="http://tempuri.org/School.xsd"> <Person> <PersonID>1</PersonID> <LastName>Abercrombie</LastName> <FirstName>Kim</FirstName> <HireDate>1995-03-11T00:00:00</HireDate> </Person> <Person> <PersonID>2</PersonID> <LastName>Barzdukas</LastName> <FirstName>Gytis</FirstName> <EnrollmentDate>2005-09-01T00:00:00</EnrollmentDate> </Person> <Person> ... You can also have data from various tables in one single xml file, if that's appropriate for you (but beware of the already mentioned ordering issues). It's true that your test assembly may end up with dozens of such xml files, each containing quite a big amount of text data. But because the files are of very low complexity, and with the help of a little bit of Copy/Paste and Excel magic, this appears to be well manageable. Executing some basic tests Here are some of the possible tests that can be written with the above preparations in place: private const string People = @"..\..\TestData\School.People.xml"; ... [Test, MultipleAsserts, TestsOn("PersonRepository.GetNameList")] public void GetNameList_ListOrdering_ReturnsTheExpectedFullNames() { InsertTestData(People); List<string> names = _personRepository.GetNameList(NameOrdering.List); Assert.Count(34, names); Assert.AreEqual("Abercrombie, Kim", names.First()); Assert.AreEqual("Zheng, Roger", names.Last()); } [Test, MultipleAsserts, TestsOn("PersonRepository.GetNameList")] [DependsOn("RemovePerson_CalledOnce_DecreasesCountByOne")] public void GetNameList_NormalOrdering_ReturnsTheExpectedFullNames() { InsertTestData(People); List<string> names = _personRepository.GetNameList(NameOrdering.Normal); Assert.Count(34, names); Assert.AreEqual("Alexandra Walker", names.First()); Assert.AreEqual("Yan Li", names.Last()); } [Test, TestsOn("PersonRepository.AddPerson")] public void AddPerson_CalledOnce_IncreasesCountByOne() { InsertTestData(People); int count = _personRepository.Count; _personRepository.AddPerson(new Person { FirstName = "Thomas", LastName = "Weller" }); Assert.AreEqual(count + 1, _personRepository.Count); } [Test, TestsOn("PersonRepository.RemovePerson")] public void RemovePerson_CalledOnce_DecreasesCountByOne() { InsertTestData(People); int count = _personRepository.Count; _personRepository.RemovePerson(new Person { PersonID = 33 }); Assert.AreEqual(count - 1, _personRepository.Count); } Not much difference here compared to the corresponding Typemock versions, except that we had to do a bit more preparational work (and also it was harder to get the required knowledge). But this picture changes quite dramatically if we look at some more demanding test cases: Ok, and what if things are becoming somewhat more complex? Tests like the above ones represent the 'easy' scenarios. They may account for the biggest portion of real-world use cases of the application, and they are important to make sure that it is generally sound. But usually, all these nasty little bugs originate from the more complex parts of our code, or they occur when something goes wrong. So, for a testing strategy to be of real practical use, it is especially important to see how easy or difficult it is to mimick a scenario which represents a more complex or exceptional case. The following test, for example, deals with the case that there is some sort of invalid input from the caller: [Test, MultipleAsserts, TestsOn("PersonRepository.GetCourseMembers")] [Row(null, typeof(ArgumentNullException))] [Row("", typeof(ArgumentException))] [Row("NotExistingCourse", typeof(ArgumentException))] public void GetCourseMembers_WithGivenVariousInvalidValues_Throws(string courseTitle, Type expectedInnerExceptionType) { var exception = Assert.Throws<RepositoryException>(() => _personRepository.GetCourseMembers(courseTitle)); Assert.IsInstanceOfType(expectedInnerExceptionType, exception.InnerException); } Apparently, this test doesn't need an 'Arrange' part at all (see here for the same test with the Typemock tool). It acts just like any other client code, and all the required business logic comes from the database itself. This doesn't always necessarily mean that there is less complexity, but only that the complexity happens in a different part of your test resources (in the xml files namely, where you sometimes have to spend a lot of effort for carefully preparing the required test data). Another example, which relies on an underlying 1-n relationship, might be this: [Test, MultipleAsserts, TestsOn("PersonRepository.GetCourseMembers")] public void GetCourseMembers_WhenGivenAnExistingCourse_ReturnsListOfStudents() { InsertTestData(People, Course, Department, StudentGrade); List<Person> persons = _personRepository.GetCourseMembers("Macroeconomics"); Assert.Count(4, persons); Assert.ForAll( persons, @p => new[] { 10, 11, 12, 14 }.Contains(@p.PersonID), "Person has none of the expected IDs."); } If you compare this test to its corresponding Typemock version, you immediately see that the test itself is much simpler, easier to read, and thus much more intention-revealing. The complexity here lies hidden behind the call to the InsertTestData() helper method and the content of the used xml files with the test data. And also note that you might have to provide additional data which are not even directly relevant to your test, but are required only to fulfill some integrity needs of the underlying database. Conclusion The first thing to notice when comparing the NDbUnit approach to its Typemock counterpart obviously deals with performance: Of course, NDbUnit is much slower than Typemock. Technically, it doesn't even make sense to compare the two tools. But practically, it may well play a role and could or could not be an issue, depending on how much tests you have of this kind, how often you run them, and what role they play in your development cycle. Also, because the dataset from the required xsd file must fully match the database schema (even in parts that otherwise wouldn't be relevant to you), it can be quite cumbersome to be in a team where different people are working with the database in parallel. My personal experience is – as already said in the first part – that Typemock gives you a better development experience in a 'dynamic' scenario (when you're working in some kind of TDD-style, you're oftentimes executing the tests from your dev box, and your database schema changes frequently), whereas the NDbUnit approach is a good and solid solution in more 'static' development scenarios (when you need to execute the tests less frequently or only on a separate build server, and/or the underlying database schema can be kept relatively stable), for example some variations of higher-level integration or User-Acceptance tests. But in any case, opening Entity Framework based applications for testing requires a fair amount of resources, planning, and preparational work – it's definitely not the kind of stuff that you would call 'easy to test'. Hopefully, future versions of EF will take testing concerns into account. Otherwise, I don't see too much of a future for the framework in the long run, even though it's quite popular at the moment... The sample solution A sample solution (VS 2010) with the code from this article series is available via my Bitbucket account from here (Bitbucket is a hosting site for Mercurial repositories. The repositories may also be accessed with the Git and Subversion SCMs - consult the documentation for details. In addition, it is possible to download the solution simply as a zipped archive – via the 'get source' button on the very right.). The solution contains some more tests against the PersonRepository class, which are not shown here. Also, it contains database scripts to create and fill the School sample database. To compile and run, the solution expects the Gallio/MbUnit framework to be installed (which is free and can be downloaded from here), the NDbUnit framework (which is also free and can be downloaded from here), and the Typemock Isolator tool (a fully functional 30day-trial is available here). Moreover, you will need an instance of the Microsoft SQL Server DBMS, and you will have to adapt the connection strings in the test projects App.config files accordingly.

Read the article

64-bit Archives Needed

- by user9154181

A little over a year ago, we received a question from someone who was trying to build software on Solaris. He was getting errors from the ar command when creating an archive. At that time, the ar command on Solaris was a 32-bit command. There was more than 2GB of data, and the ar command was hitting the file size limit for a 32-bit process that doesn't use the largefile APIs. Even in 2011, 2GB is a very large amount of code, so we had not heard this one before. Most of our toolchain was extended to handle 64-bit sized data back in the 1990's, but archives were not changed, presumably because there was no perceived need for it. Since then of course, programs have continued to get larger, and in 2010, the time had finally come to investigate the issue and find a way to provide for larger archives. As part of that process, I had to do a deep dive into the archive format, and also do some Unix archeology. I'm going to record what I learned here, to document what Solaris does, and in the hope that it might help someone else trying to solve the same problem for their platform. Archive Format Details Archives are hardly cutting edge technology. They are still used of course, but their basic form hasn't changed in decades. Other than to fix a bug, which is rare, we don't tend to touch that code much. The archive file format is described in /usr/include/ar.h, and I won't repeat the details here. Instead, here is a rough overview of the archive file format, implemented by System V Release 4 (SVR4) Unix systems such as Solaris: Every archive starts with a "magic number". This is a sequence of 8 characters: "!<arch>\n". The magic number is followed by 1 or more members. A member starts with a fixed header, defined by the ar_hdr structure in/usr/include/ar.h. Immediately following the header comes the data for the member. Members must be padded at the end with newline characters so that they have even length. The requirement to pad members to an even length is a dead giveaway as to the age of the archive format. It tells you that this format dates from the 1970's, and more specifically from the era of 16-bit systems such as the PDP-11 that Unix was originally developed on. A 32-bit system would have required 4 bytes, and 64-bit systems such as we use today would probably have required 8 bytes. 2 byte alignment is a poor choice for ELF object archive members. 32-bit objects require 4 byte alignment, and 64-bit objects require 64-bit alignment. The link-editor uses mmap() to process archives, and if the members have the wrong alignment, we have to slide (copy) them to the correct alignment before we can access the ELF data structures inside. The archive format requires 2 byte padding, but it doesn't prohibit more. The Solaris ar command takes advantage of this, and pads ELF object members to 8 byte boundaries. Anything else is padded to 2 as required by the format. The archive header (ar_hdr) represents all numeric values using an ASCII text representation rather than as binary integers. This means that an archive that contains only text members can be viewed using tools such as cat, more, or a text editor. The original designers of this format clearly thought that archives would be used for many file types, and not just for objects. Things didn't turn out that way of course — nearly all archives contain relocatable objects for a single operating system and machine, and are used primarily as input to the link-editor (ld). Archives can have special members that are created by the ar command rather than being supplied by the user. These special members are all distinguished by having a name that starts with the slash (/) character. This is an unambiguous marker that says that the user could not have supplied it. The reason for this is that regular archive members are given the plain name of the file that was inserted to create them, and any path components are stripped off. Slash is the delimiter character used by Unix to separate path components, and as such cannot occur within a plain file name. The ar command hides the special members from you when you list the contents of an archive, so most users don't know that they exist. There are only two possible special members: A symbol table that maps ELF symbols to the object archive member that provides it, and a string table used to hold member names that exceed 15 characters. The '/' convention for tagging special members provides room for adding more such members should the need arise. As I will discuss below, we took advantage of this fact to add an alternate 64-bit symbol table special member which is used in archives that are larger than 4GB. When an archive contains ELF object members, the ar command builds a special archive member known as the symbol table that maps all ELF symbols in the object to the archive member that provides it. The link-editor uses this symbol table to determine which symbols are provided by the objects in that archive. If an archive has a symbol table, it will always be the first member in the archive, immediately following the magic number. Unlike member headers, symbol tables do use binary integers to represent offsets. These integers are always stored in big-endian format, even on a little endian host such as x86. The archive header (ar_hdr) provides 15 characters for representing the member name. If any member has a name that is longer than this, then the real name is written into a special archive member called the string table, and the member's name field instead contains a slash (/) character followed by a decimal representation of the offset of the real name within the string table. The string table is required to precede all normal archive members, so it will be the second member if the archive contains a symbol table, and the first member otherwise. The archive format is not designed to make finding a given member easy. Such operations move through the archive from front to back examining each member in turn, and run in O(n) time. This would be bad if archives were commonly used in that manner, but in general, they are not. Typically, the ar command is used to build an new archive from scratch, inserting all the objects in one operation, and then the link-editor accesses the members in the archive in constant time by using the offsets provided by the symbol table. Both of these operations are reasonably efficient. However, listing the contents of a large archive with the ar command can be rather slow. Factors That Limit Solaris Archive Size As is often the case, there was more than one limiting factor preventing Solaris archives from growing beyond the 32-bit limits of 2GB (32-bit signed) and 4GB (32-bit unsigned). These limits are listed in the order they are hit as archive size grows, so the earlier ones mask those that follow. The original Solaris archive file format can handle sizes up to 4GB without issue. However, the ar command was delivered as a 32-bit executable that did not use the largefile APIs. As such, the ar command itself could not create a file larger than 2GB. One can solve this by building ar with the largefile APIs which would allow it to reach 4GB, but a simpler and better answer is to deliver a 64-bit ar, which has the ability to scale well past 4GB. Symbol table offsets are stored as 32-bit big-endian binary integers, which limits the maximum archive size to 4GB. To get around this limit requires a different symbol table format, or an extension mechanism to the current one, similar in nature to the way member names longer than 15 characters are handled in member headers. The size field in the archive member header (ar_hdr) is an ASCII string capable of representing a 32-bit unsigned value. This places a 4GB size limit on the size of any individual member in an archive. In considering format extensions to get past these limits, it is important to remember that very few archives will require the ability to scale past 4GB for many years. The old format, while no beauty, continues to be sufficient for its purpose. This argues for a backward compatible fix that allows newer versions of Solaris to produce archives that are compatible with older versions of the system unless the size of the archive exceeds 4GB. Archive Format Differences Among Unix Variants While considering how to extend Solaris archives to scale to 64-bits, I wanted to know how similar archives from other Unix systems are to those produced by Solaris, and whether they had already solved the 64-bit issue. I've successfully moved archives between different Unix systems before with good luck, so I knew that there was some commonality. If it turned out that there was already a viable defacto standard for 64-bit archives, it would obviously be better to adopt that rather than invent something new. The archive file format is not formally standardized. However, the ar command and archive format were part of the original Unix from Bell Labs. Other systems started with that format, extending it in various often incompatible ways, but usually with the same common shared core. Most of these systems use the same magic number to identify their archives, despite the fact that their archives are not always fully compatible with each other. It is often true that archives can be copied between different Unix variants, and if the member names are short enough, the ar command from one system can often read archives produced on another. In practice, it is rare to find an archive containing anything other than objects for a single operating system and machine type. Such an archive is only of use on the type of system that created it, and is only used on that system. This is probably why cross platform compatibility of archives between Unix variants has never been an issue. Otherwise, the use of the same magic number in archives with incompatible formats would be a problem. I was able to find information for a number of Unix variants, described below. These can be divided roughly into three tribes, SVR4 Unix, BSD Unix, and IBM AIX. Solaris is a SVR4 Unix, and its archives are completely compatible with those from the other members of that group (GNU/Linux, HP-UX, and SGI IRIX). AIX AIX is an exception to rule that Unix archive formats are all based on the original Bell labs Unix format. It appears that AIX supports 2 formats (small and big), both of which differ in fundamental ways from other Unix systems: These formats use a different magic number than the standard one used by Solaris and other Unix variants. They include support for removing archive members from a file without reallocating the file, marking dead areas as unused, and reusing them when new archive items are inserted. They have a special table of contents member (File Member Header) which lets you find out everything that's in the archive without having to actually traverse the entire file. Their symbol table members are quite similar to those from other systems though. Their member headers are doubly linked, containing offsets to both the previous and next members. Of the Unix systems described here, AIX has the only format I saw that will have reasonable insert/delete performance for really large archives. Everyone else has O(n) performance, and are going to be slow to use with large archives. BSD BSD has gone through 4 versions of archive format, which are described in their manpage. They use the same member header as SVR4, but their symbol table format is different, and their scheme for long member names puts the name directly after the member header rather than into a string table. GNU/Linux The GNU toolchain uses the SVR4 format, and is compatible with Solaris. HP-UX HP-UX seems to follow the SVR4 model, and is compatible with Solaris. IRIX IRIX has 32 and 64-bit archives. The 32-bit format is the standard SVR4 format, and is compatible with Solaris. The 64-bit format is the same, except that the symbol table uses 64-bit integers. IRIX assumes that an archive contains objects of a single ELFCLASS/MACHINE, and any archive containing ELFCLASS64 objects receives a 64-bit symbol table. Although they only use it for 64-bit objects, nothing in the archive format limits it to ELFCLASS64. It would be perfectly valid to produce a 64-bit symbol table in an archive containing 32-bit objects, text files, or anything else. Tru64 Unix (Digital/Compaq/HP) Tru64 Unix uses a format much like ours, but their symbol table is a hash table, making specific symbol lookup much faster. The Solaris link-editor uses archives by examining the entire symbol table looking for unsatisfied symbols for the link, and not by looking up individual symbols, so there would be no benefit to Solaris from such a hash table. The Tru64 ld must use a different approach in which the hash table pays off for them. Widening the existing SVR4 archive symbol tables rather than inventing something new is the simplest path forward. There is ample precedent for this approach in the ELF world. When ELF was extended to support 64-bit objects, the approach was largely to take the existing data structures, and define 64-bit versions of them. We called the old set ELF32, and the new set ELF64. My guess is that there was no need to widen the archive format at that time, but had there been, it seems obvious that this is how it would have been done. The Implementation of 64-bit Solaris Archives As mentioned earlier, there was no desire to improve the fundamental nature of archives. They have always had O(n) insert/delete behavior, and for the most part it hasn't mattered. AIX made efforts to improve this, but those efforts did not find widespread adoption. For the purposes of link-editing, which is essentially the only thing that archives are used for, the existing format is adequate, and issues of backward compatibility trump the desire to do something technically better. Widening the existing symbol table format to 64-bits is therefore the obvious way to proceed. For Solaris 11, I implemented that, and I also updated the ar command so that a 64-bit version is run by default. This eliminates the 2 most significant limits to archive size, leaving only the limit on an individual archive member. We only generate a 64-bit symbol table if the archive exceeds 4GB, or when the new -S option to the ar command is used. This maximizes backward compatibility, as an archive produced by Solaris 11 is highly likely to be less than 4GB in size, and will therefore employ the same format understood by older versions of the system. The main reason for the existence of the -S option is to allow us to test the 64-bit format without having to construct huge archives to do so. I don't believe it will find much use outside of that. Other than the new ability to create and use extremely large archives, this change is largely invisible to the end user. When reading an archive, the ar command will transparently accept either form of symbol table. Similarly, the ELF library (libelf) has been updated to understand either format. Users of libelf (such as the link-editor ld) do not need to be modified to use the new format, because these changes are encapsulated behind the existing functions provided by libelf. As mentioned above, this work did not lift the limit on the maximum size of an individual archive member. That limit remains fixed at 4GB for now. This is not because we think objects will never get that large, for the history of computing says otherwise. Rather, this is based on an estimation that single relocatable objects of that size will not appear for a decade or two. A lot can change in that time, and it is better not to overengineer things by writing code that will sit and rot for years without being used. It is not too soon however to have a plan for that eventuality. When the time comes when this limit needs to be lifted, I believe that there is a simple solution that is consistent with the existing format. The archive member header size field is an ASCII string, like the name, and as such, the overflow scheme used for long names can also be used to handle the size. The size string would be placed into the archive string table, and its offset in the string table would then be written into the archive header size field using the same format "/ddd" used for overflowed names.

Read the article

How can I block a specific type of DDoS attack?

- by Mark

My site is being attacked and is using up all the RAM. I looked at the Apache logs and every malicious hit seems to simply be a POST request on /, which is never required by a normal user. So I thought and wondered if there's any sort of solution or utility that will monitor my Apache logs and block every IP that performs a POST request on the site root. I'm not familiar with DDoS protection and searching didn't seem to give me an answer, so I came here. Thanks. Example logs: 103.3.221.202 - - [30/Sep/2012:16:02:03 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 122.72.80.100 - - [30/Sep/2012:16:02:03 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 122.72.28.15 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" 210.75.120.5 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Windows NT 6.1; rv:12.0) Gecko/20100101 Firefox/12.0" 122.96.59.103 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire_A8181 Build/FRF91) App3leWebKit/53.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" 122.96.59.103 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire_A8181 Build/FRF91) App3leWebKit/53.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" 122.72.124.3 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.112.148 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:13.0) Gecko/20100101 Firefox/13.0.1" 190.39.210.26 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.0" 302 485 "-" "Mozilla/5.0 (Windows NT 6.0; rv:13.0) Gecko/20100101 Firefox/13.0.1" 210.213.245.230 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.0" 302 485 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPhone; CPU iPhone OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 101.44.1.28 - - [30/Sep/2012:16:02:14 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 103.3.221.202 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 466 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 101.44.1.25 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPhone; CPU iPhone OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 211.161.152.108 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 211.161.152.106 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:5.0.1) Gecko/20100101 Firefox/5.0.1" 103.3.221.202 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 466 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6" 101.44.1.25 - - [30/Sep/2012:16:02:10 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 122.72.124.2 - - [30/Sep/2012:16:02:17 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.124.2 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.124.2 - - [30/Sep/2012:16:02:17 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 210.213.245.230 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.0" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" iptables -L: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination - bui@debian:~$ sudo iptables -I INPUT 1 -m string --algo bm --string 'Keep-Alive: 300' -j DROP iptables: No chain/target/match by that name. bui@debian:~$ sudo iptables -A INPUT -m string --algo bm --string 'Keep-Alive: 300' -j DROP iptables: No chain/target/match by that name.

Read the article

Troubleshooting latency spikes on ESXi NFS datastores

- by exo_cw

I'm experiencing fsync latencies of around five seconds on NFS datastores in ESXi, triggered by certain VMs. I suspect this might be caused by VMs using NCQ/TCQ, as this does not happen with virtual IDE drives. This can be reproduced using fsync-tester (by Ted Ts'o) and ioping. For example using a Grml live system with a 8GB disk: Linux 2.6.33-grml64: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 5.0391 fsync time: 5.0438 fsync time: 5.0300 fsync time: 0.0231 fsync time: 0.0243 fsync time: 5.0382 fsync time: 5.0400 [... goes on like this ...] That is 5 seconds, not milliseconds. This is even creating IO-latencies on a different VM running on the same host and datastore: root@grml /mnt/sda/ioping-0.5 # ./ioping -i 0.3 -p 20 . 4096 bytes from . (reiserfs /dev/sda): request=1 time=7.2 ms 4096 bytes from . (reiserfs /dev/sda): request=2 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=3 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=4 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=5 time=4809.0 ms 4096 bytes from . (reiserfs /dev/sda): request=6 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=7 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=8 time=1.1 ms 4096 bytes from . (reiserfs /dev/sda): request=9 time=1.3 ms 4096 bytes from . (reiserfs /dev/sda): request=10 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=11 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=12 time=4950.0 ms When I move the first VM to local storage it looks perfectly normal: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 0.0191 fsync time: 0.0201 fsync time: 0.0203 fsync time: 0.0206 fsync time: 0.0192 fsync time: 0.0231 fsync time: 0.0201 [... tried that for one hour: no spike ...] Things I've tried that made no difference: Tested several ESXi Builds: 381591, 348481, 260247 Tested on different hardware, different Intel and AMD boxes Tested with different NFS servers, all show the same behavior: OpenIndiana b147 (ZFS sync always or disabled: no difference) OpenIndiana b148 (ZFS sync always or disabled: no difference) Linux 2.6.32 (sync or async: no difference) It makes no difference if the NFS server is on the same machine (as a virtual storage appliance) or on a different host Guest OS tested, showing problems: Windows 7 64 Bit (using CrystalDiskMark, latency spikes happen mostly during preparing phase) Linux 2.6.32 (fsync-tester + ioping) Linux 2.6.38 (fsync-tester + ioping) I could not reproduce this problem on Linux 2.6.18 VMs. Another workaround is to use virtual IDE disks (vs SCSI/SAS), but that is limiting performance and the number of drives per VM. Update 2011-06-30: The latency spikes seem to happen more often if the application writes in multiple small blocks before fsync. For example fsync-tester does this (strace output): pwrite(3, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"..., 1048576, 0) = 1048576 fsync(3) = 0 ioping does this while preparing the file: [lots of pwrites] pwrite(3, "********************************"..., 4096, 1036288) = 4096 pwrite(3, "********************************"..., 4096, 1040384) = 4096 pwrite(3, "********************************"..., 4096, 1044480) = 4096 fsync(3) = 0 The setup phase of ioping almost always hangs, while fsync-tester sometimes works fine. Is someone capable of updating fsync-tester to write multiple small blocks? My C skills suck ;) Update 2011-07-02: This problem does not occur with iSCSI. I tried this with the OpenIndiana COMSTAR iSCSI server. But iSCSI does not give you easy access to the VMDK files so you can move them between hosts with snapshots and rsync. Update 2011-07-06: This is part of a wireshark capture, captured by a third VM on the same vSwitch. This all happens on the same host, no physical network involved. I've started ioping around time 20. There were no packets sent until the five second delay was over: No. Time Source Destination Protocol Info 1082 16.164096 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1085), FH:0x3eb56466 Offset:0 Len:84 FILE_SYNC 1083 16.164112 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1086), FH:0x3eb56f66 Offset:0 Len:84 FILE_SYNC 1084 16.166060 192.168.250.20 192.168.250.10 TCP nfs > iclcnet-locate [ACK] Seq=445 Ack=1057 Win=32806 Len=0 TSV=432016 TSER=769110 1085 16.167678 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1082) Len:84 FILE_SYNC 1086 16.168280 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1083) Len:84 FILE_SYNC 1087 16.168417 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1057 Ack=773 Win=4163 Len=0 TSV=769110 TSER=432016 1088 23.163028 192.168.250.10 192.168.250.20 NFS V3 GETATTR Call (Reply In 1089), FH:0x0bb04963 1089 23.164541 192.168.250.20 192.168.250.10 NFS V3 GETATTR Reply (Call In 1088) Directory mode:0777 uid:0 gid:0 1090 23.274252 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1185 Ack=889 Win=4163 Len=0 TSV=769821 TSER=432716 1091 24.924188 192.168.250.10 192.168.250.20 RPC Continuation 1092 24.924210 192.168.250.10 192.168.250.20 RPC Continuation 1093 24.924216 192.168.250.10 192.168.250.20 RPC Continuation 1094 24.924225 192.168.250.10 192.168.250.20 RPC Continuation 1095 24.924555 192.168.250.20 192.168.250.10 TCP nfs > iclcnet_svinfo [ACK] Seq=6893 Ack=1118613 Win=32625 Len=0 TSV=432892 TSER=769986 1096 24.924626 192.168.250.10 192.168.250.20 RPC Continuation 1097 24.924635 192.168.250.10 192.168.250.20 RPC Continuation 1098 24.924643 192.168.250.10 192.168.250.20 RPC Continuation 1099 24.924649 192.168.250.10 192.168.250.20 RPC Continuation 1100 24.924653 192.168.250.10 192.168.250.20 RPC Continuation 2nd Update 2011-07-06: There seems to be some influence from TCP window sizes. I was not able to reproduce this problem using FreeNAS (based on FreeBSD) as a NFS server. The wireshark captures showed TCP window updates to 29127 bytes in regular intervals. I did not see them with OpenIndiana, which uses larger window sizes by default. I can no longer reproduce this problem if I set the following options in OpenIndiana and restart the NFS server: ndd -set /dev/tcp tcp_recv_hiwat 8192 # default is 128000 ndd -set /dev/tcp tcp_max_buf 1048575 # default is 1048576 But this kills performance: Writing from /dev/zero to a file with dd_rescue goes from 170MB/s to 80MB/s. Update 2011-07-07: I've uploaded this tcpdump capture (can be analyzed with wireshark). In this case 192.168.250.2 is the NFS server (OpenIndiana b148) and 192.168.250.10 is the ESXi host. Things I've tested during this capture: Started "ioping -w 5 -i 0.2 ." at time 30, 5 second hang in setup, completed at time 40. Started "ioping -w 5 -i 0.2 ." at time 60, 5 second hang in setup, completed at time 70. Started "fsync-tester" at time 90, with the following output, stopped at time 120: fsync time: 0.0248 fsync time: 5.0197 fsync time: 5.0287 fsync time: 5.0242 fsync time: 5.0225 fsync time: 0.0209 2nd Update 2011-07-07: Tested another NFS server VM, this time NexentaStor 3.0.5 community edition: Shows the same problems. Update 2011-07-31: I can also reproduce this problem on the new ESXi build 4.1.0.433742.

Read the article

Sniffing out SQL Code Smells: Inconsistent use of Symbolic names and Datatypes

- by Phil Factor

It is an awkward feeling. You’ve just delivered a database application that seems to be working fine in production, and you just run a few checks on it. You discover that there is a potential bug that, out of sheer good chance, hasn’t kicked in to produce an error; but it lurks, like a smoking bomb. Worse, maybe you find that the bug has started its evil work of corrupting the data, but in ways that nobody has, so far detected. You investigate, and find the damage. You are somehow going to have to repair it. Yes, it still very occasionally happens to me. It is not a nice feeling, and I do anything I can to prevent it happening. That’s why I’m interested in SQL code smells. SQL Code Smells aren’t necessarily bad practices, but just show you where to focus your attention when checking an application. Sometimes with databases the bugs can be subtle. SQL is rather like HTML: the language does its best to try to carry out your wishes, rather than to be picky about your bugs. Most of the time, this is a great benefit, but not always. One particular place where this can be detrimental is where you have implicit conversion between different data types. Most of the time it is completely harmless but we’re concerned about the occasional time it isn’t. Let’s give an example: String truncation. Let’s give another even more frightening one, rounding errors on assignment to a number of different precision. Each requires a blog-post to explain in detail and I’m not now going to try. Just remember that it is not always a good idea to assign data to variables, parameters or even columns when they aren’t the same datatype, especially if you are relying on implicit conversion to work its magic.For details of the problem and the consequences, see here: SR0014: Data loss might occur when casting from {Type1} to {Type2} . For any experienced Database Developer, this is a more frightening read than a Vampire Story. This is why one of the SQL Code Smells that makes me edgy, in my own or other peoples’ code, is to see parameters, variables and columns that have the same names and different datatypes. Whereas quite a lot of this is perfectly normal and natural, you need to check in case one of two things have gone wrong. Either sloppy naming, or mixed datatypes. Sure it is hard to remember whether you decided that the length of a log entry was 80 or 100 characters long, or the precision of a number. That is why a little check like this I’m going to show you is excellent for tidying up your code before you check it back into source Control! 1/ Checking Parameters only If you were just going to check parameters, you might just do this. It simply groups all the parameters, either input or output, of all the routines (e.g. stored procedures or functions) by their name and checks to see, in the HAVING clause, whether their data types are all the same. If not, it lists all the examples and their origin (the routine) Even this little check can occasionally be scarily revealing. ;WITH userParameter AS ( SELECT c.NAME AS ParameterName, OBJECT_SCHEMA_NAME(c.object_ID) + '.' + OBJECT_NAME(c.object_ID) AS ObjectName, t.name + ' ' + CASE --we may have to put in the length WHEN t.name IN ('char', 'varchar', 'nchar', 'nvarchar') THEN '(' + CASE WHEN c.max_length = -1 THEN 'MAX' ELSE CONVERT(VARCHAR(4), CASE WHEN t.name IN ('nchar', 'nvarchar') THEN c.max_length / 2 ELSE c.max_length END) END + ')' WHEN t.name IN ('decimal', 'numeric') THEN '(' + CONVERT(VARCHAR(4), c.precision) + ',' + CONVERT(VARCHAR(4), c.Scale) + ')' ELSE '' END --we've done with putting in the length + CASE WHEN XML_collection_ID <> 0 THEN --deal with object schema names '(' + CASE WHEN is_XML_Document = 1 THEN 'DOCUMENT ' ELSE 'CONTENT ' END + COALESCE( (SELECT QUOTENAME(ss.name) + '.' + QUOTENAME(sc.name) FROM sys.xml_schema_collections sc INNER JOIN Sys.Schemas ss ON sc.schema_ID = ss.schema_ID WHERE sc.xml_collection_ID = c.XML_collection_ID),'NULL') + ')' ELSE '' END AS [DataType] FROM sys.parameters c INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID WHERE OBJECT_SCHEMA_NAME(c.object_ID) <> 'sys' AND parameter_id>0)SELECT CONVERT(CHAR(80),objectName+'.'+ParameterName),DataType FROM UserParameterWHERE ParameterName IN (SELECT ParameterName FROM UserParameter GROUP BY ParameterName HAVING MIN(Datatype)<>MAX(DataType))ORDER BY ParameterName so, in a very small example here, we have a @ClosingDelimiter variable that is only CHAR(1) when, by the looks of it, it should be up to ten characters long, or even worse, a function that should be a char(1) and seems to let in a string of ten characters. Worth investigating. Then we have a @Comment variable that can't decide whether it is a VARCHAR(2000) or a VARCHAR(MAX) 2/ Columns and Parameters Actually, once we’ve cleared up the mess we’ve made of our parameter-naming in the database we’re inspecting, we’re going to be more interested in listing both columns and parameters. We can do this by modifying the routine to list columns as well as parameters. Because of the slight complexity of creating the string version of the datatypes, we will create a fake table of both columns and parameters so that they can both be processed the same way. After all, we want the datatypes to match Unfortunately, parameters do not expose all the attributes we are interested in, such as whether they are nullable (oh yes, subtle bugs happen if this isn’t consistent for a datatype). We’ll have to leave them out for this check. Voila! A slight modification of the first routine ;WITH userObject AS ( SELECT Name AS DataName,--the actual name of the parameter or column ('@' removed) --and the qualified object name of the routine OBJECT_SCHEMA_NAME(ObjectID) + '.' + OBJECT_NAME(ObjectID) AS ObjectName, --now the harder bit: the definition of the datatype. TypeName + ' ' + CASE --we may have to put in the length. e.g. CHAR (10) WHEN TypeName IN ('char', 'varchar', 'nchar', 'nvarchar') THEN '(' + CASE WHEN MaxLength = -1 THEN 'MAX' ELSE CONVERT(VARCHAR(4), CASE WHEN TypeName IN ('nchar', 'nvarchar') THEN MaxLength / 2 ELSE MaxLength END) END + ')' WHEN TypeName IN ('decimal', 'numeric')--a BCD number! THEN '(' + CONVERT(VARCHAR(4), Precision) + ',' + CONVERT(VARCHAR(4), Scale) + ')' ELSE '' END --we've done with putting in the length + CASE WHEN XML_collection_ID <> 0 --tush tush. XML THEN --deal with object schema names '(' + CASE WHEN is_XML_Document = 1 THEN 'DOCUMENT ' ELSE 'CONTENT ' END + COALESCE( (SELECT TOP 1 QUOTENAME(ss.name) + '.' + QUOTENAME(sc.Name) FROM sys.xml_schema_collections sc INNER JOIN Sys.Schemas ss ON sc.schema_ID = ss.schema_ID WHERE sc.xml_collection_ID = XML_collection_ID),'NULL') + ')' ELSE '' END AS [DataType], DataObjectType FROM (Select t.name AS TypeName, REPLACE(c.name,'@','') AS Name, c.max_length AS MaxLength, c.precision AS [Precision], c.scale AS [Scale], c.[Object_id] AS ObjectID, XML_collection_ID, is_XML_Document,'P' AS DataobjectType FROM sys.parameters c INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID AND parameter_id>0 UNION all Select t.name AS TypeName, c.name AS Name, c.max_length AS MaxLength, c.precision AS [Precision], c.scale AS [Scale], c.[Object_id] AS ObjectID, XML_collection_ID,is_XML_Document, 'C' AS DataobjectType FROM sys.columns c INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID WHERE OBJECT_SCHEMA_NAME(c.object_ID) <> 'sys' )f)SELECT CONVERT(CHAR(80),objectName+'.' + CASE WHEN DataobjectType ='P' THEN '@' ELSE '' END + DataName),DataType FROM UserObjectWHERE DataName IN (SELECT DataName FROM UserObject GROUP BY DataName HAVING MIN(Datatype)<>MAX(DataType))ORDER BY DataName Hmm. I can tell you I found quite a few minor issues with the various tabases I tested this on, and found some potential bugs that really leap out at you from the results. Here is the start of the result for AdventureWorks. Yes, AccountNumber is, for some reason, a Varchar(10) in the Customer table. Hmm. odd. Why is a city fifty characters long in that view? The idea of the description of a colour being 256 characters long seems over-ambitious. Go down the list and you'll spot other mistakes. There are no bugs, but just mess. We started out with a listing to examine parameters, then we mixed parameters and columns. Our last listing is for a slightly more in-depth look at table columns. You’ll notice that we’ve delibarately removed the indication of whether a column is persisted, or is an identity column because that gives us false positives for our code smells. If you just want to browse your metadata for other reasons (and it can quite help in some circumstances) then uncomment them! ;WITH userColumns AS ( SELECT c.NAME AS columnName, OBJECT_SCHEMA_NAME(c.object_ID) + '.' + OBJECT_NAME(c.object_ID) AS ObjectName, REPLACE(t.name + ' ' + CASE WHEN is_computed = 1 THEN ' AS ' + --do DDL for a computed column (SELECT definition FROM sys.computed_columns cc WHERE cc.object_id = c.object_id AND cc.column_ID = c.column_ID) --we may have to put in the length WHEN t.Name IN ('char', 'varchar', 'nchar', 'nvarchar') THEN '(' + CASE WHEN c.Max_Length = -1 THEN 'MAX' ELSE CONVERT(VARCHAR(4), CASE WHEN t.Name IN ('nchar', 'nvarchar') THEN c.Max_Length / 2 ELSE c.Max_Length END) END + ')' WHEN t.name IN ('decimal', 'numeric') THEN '(' + CONVERT(VARCHAR(4), c.precision) + ',' + CONVERT(VARCHAR(4), c.Scale) + ')' ELSE '' END + CASE WHEN c.is_rowguidcol = 1 THEN ' ROWGUIDCOL' ELSE '' END + CASE WHEN XML_collection_ID <> 0 THEN --deal with object schema names '(' + CASE WHEN is_XML_Document = 1 THEN 'DOCUMENT ' ELSE 'CONTENT ' END + COALESCE((SELECT QUOTENAME(ss.name) + '.' + QUOTENAME(sc.name) FROM sys.xml_schema_collections sc INNER JOIN Sys.Schemas ss ON sc.schema_ID = ss.schema_ID WHERE sc.xml_collection_ID = c.XML_collection_ID), 'NULL') + ')' ELSE '' END + CASE WHEN is_identity = 1 THEN CASE WHEN OBJECTPROPERTY(object_id, 'IsUserTable') = 1 AND COLUMNPROPERTY(object_id, c.name, 'IsIDNotForRepl') = 0 AND OBJECTPROPERTY(object_id, 'IsMSShipped') = 0 THEN '' ELSE ' NOT FOR REPLICATION ' END ELSE '' END + CASE WHEN c.is_nullable = 0 THEN ' NOT NULL' ELSE ' NULL' END + CASE WHEN c.default_object_id <> 0 THEN ' DEFAULT ' + object_Definition(c.default_object_id) ELSE '' END + CASE WHEN c.collation_name IS NULL THEN '' WHEN c.collation_name <> (SELECT collation_name FROM sys.databases WHERE name = DB_NAME()) COLLATE Latin1_General_CI_AS THEN COALESCE(' COLLATE ' + c.collation_name, '') ELSE '' END,' ',' ') AS [DataType]FROM sys.columns c INNER JOIN sys.types t ON c.user_Type_ID = t.user_Type_ID WHERE OBJECT_SCHEMA_NAME(c.object_ID) <> 'sys')SELECT CONVERT(CHAR(80),objectName+'.'+columnName),DataType FROM UserColumnsWHERE columnName IN (SELECT columnName FROM UserColumns GROUP BY columnName HAVING MIN(Datatype)<>MAX(DataType))ORDER BY columnName If you take a look down the results against Adventureworks, you'll see once again that there are things to investigate, mostly, in the illustration, discrepancies between null and non-null datatypes So I here you ask, what about temporary variables within routines? If ever there was a source of elusive bugs, you'll find it there. Sadly, these temporary variables are not stored in the metadata so we'll have to find a more subtle way of flushing these out, and that will, I'm afraid, have to wait!

Read the article

ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

- by GruffTech

Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

Read the article

AIX Checklist for stable obiee deployment

- by user554629

Common AIX configuration issues ( last updated 27 Aug 2012 ) OBIEE is a complicated system with many moving parts and connection points.The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators. The information in this article is time sensitive, and updated as I discover new issues or details. What makes OBIEE different? When Tech Support suggests AIX component upgrades to a stable, locked-down production AIX environment, it is common to get "push back". "Why is this necessary? We aren't we seeing issues with other software?"It's a fair question that I have often struggled to answer; here are the talking points: OBIEE is memory intensive. It is the entire purpose of the software to trade memory for repetitive, more expensive database requests across a network. OBIEE is implemented in C++ and is very dependent on the C++ runtime to behave correctly. OBIEE is aggressively thread efficient; if atomic operations on a particular architecture do not work correctly, the software crashes. OBIEE dynamically loads third-party database client libraries directly into the nqsserver process. If the library is not thread-safe, or corrupts process memory the OBIEE crash happens in an unrelated part of the code. These are extremely difficult bugs to find. OBIEE software uses 99% common source across multiple platforms: Windows, Linux, AIX, Solaris and HPUX. If a crash happens on only one platform, we begin to suspect other factors. load intensity, system differences, configuration choices, hardware failures. It is rare to have a single product require so many diverse technical skills. My role in support is to understand system configurations, performance issues, and crashes. An analyst trained in Business Analytics can't be expected to know AIX internals in the depth required to make configuration choices. Here are some guidelines. AIX C++ Runtime must be at version 11.1.0.4$ lslpp -L | grep xlC.aixobiee software will crash if xlC.aix.rte is downlevel; this is not a "try it" suggestion.Nov 2011 11.1.0.4 version is appropriate for all AIX versions ( 5, 6, 7 )Download from here:https://www-304.ibm.com/support/docview.wss?uid=swg24031426 No reboot is necessary to install, it can even be installed while applications are using the current version.Restart the apps, and they will pick up the latest version. AIX 5.3 Technology Level 12 is required when running on Power5,6,7 processorsAIX 6.1 was introduced with the newer Power chips, and we have seen no issues with 6.1 or 7.1 versions.Customers with an unstable deployment, dozens of unexplained crashes, became stable after the upgrade.If your AIX system is 5.3, the minimum TL level should be at or higher than this:$ oslevel -s 5300-12-03-1107IBM typically supports only the two latest versions of AIX ( 6.1 and 7.1, for example). AIX 5.3 is still supported and popular running in an LPAR. obiee userid limits$ ulimit -Ha ( hard limits )$ ulimit -a ( default limits )core file size (blocks) unlimiteddata seg size (kbytes) unlimitedfile size (blocks) unlimitedmax memory size (kbytes) unlimitedopen files 10240 cpu time (seconds) unlimitedvirtual memory (kbytes) unlimitedIt is best to establish the values in /etc/security/limitsroot user is needed to observe and modify this file.If you modify a limit, you will need to relog in to change it again. For example,$ ulimit -c 0$ ulimit -c 2097151cannot modify limit: Operation not permitted$ ulimit -c unlimited$ ulimit -c0There are only two meaningful values for ulimit -c ; zero or unlimited.Anything else is likely to produce a truncated core file that cannot be analyzed. Deploy 32-bit or 64-bit ?Early versions of OBIEE offered 32-bit or 64-bit choice to AIX customers.The 32-bit choice was needed if a database vendor did not supply a 64-bit client library.That's no longer an issue and beginning with OBIEE 11, 32-bit code is no longer shipped.A common error that leads to "out of memory" conditions to to accept the 32-bit memory configuration choices on 64-bit deployments. The significant configuration choices are: Maximum process data (heap) size is in an AIX environment variableLDR_CNTRL=IGNOREUNLOAD@LOADPUBLIC@PREREAD_SHLIB@MAXDATA=0x... Two thread stack sizes are made in obiee NQSConfig.INI[ SERVER ]SERVER_THREAD_STACK_SIZE = 0;DB_GATEWAY_THREAD_STACK_SIZE = 0; Sort memory in NQSConfig.INI[ GENERAL ]SORT_MEMORY_SIZE = 4 MB ;SORT_BUFFER_INCREMENT_SIZE = 256 KB ; Choosing a value for MAXDATA:0x080000000 2GB Default maximum 32-bit heap size ( 8 with 7 zeros )0x100000000 4GB 64-bit breaking even with 32-bit ( 1 with 8 zeros )0x200000000 8GB 64-bit double 32-bit max0x400000000 16GB 64-bit safetyUsing 2GB heap size for a 64-bit process will almost certainly lead to an out-of-memory situation.Registers are twice as big ... consume twice as much memory in the heap.Upgrading to a 4GB heap for a 64-bit process is just "breaking even" with 32-bit.A 32-bit process is constrained by the 32-bit virtual addressing limits. Heap memory is used for dynamic requirements of obiee software, thread stacks for each of the configured threads, and sometimes for shared libraries. 64-bit processes are not constrained in this way; extra heap space can be configured for safety against a query that might create a sudden requirement for excessive storage. If the storage is not available, this query might crash the whole server and disrupt existing users.There is no performance penalty on AIX for configuring more memory than required; extra memory can be configured for safety. If there are no other considerations, start with 8GB.Choosing a value for Thread Stack size:zero is the value documented to select an appropriate default for thread stack size. My preference is to change this to an absolute value, even if you intend to use the documented default; it provides better documentation and removes the "surprise" factor.There are two thread types that can be configured. GATEWAY is used by a thread pool to call a database client library to establish a DB connection.The default size is 256KB; many customers raise this to 512KB ( no performance penalty for over-configuring ). This value must be set to 1 MB if Teradata connections are used. SERVER threads are used to run queries. OBIEE uses recursive algorithms during the analysis of query structures which can consume significant thread stack storage. It's difficult to provide guidance on a value that depends on data and complexity. The general notion is to provide more space than you think you need, "double down" and increase the value if you run out, otherwise inspect the query to understand why it is too complex for the thread stack. There are protections built into the software to abort a single user query that is too complex, but the algorithms don't cover all situations.256 KB The default 32-bit stack size. Many customers increased this to 512KB on 32-bit. A 64-bit server is very likely to crash with this value; the stack contains mostly register values, which are twice as big.512 KB The documented 64-bit default. Some early releases of obiee didn't set this correctly, resulting in 256KB stacks.1 MB The recommended 64-bit setting. If your system only ever uses 512KB of stack space, there is no performance penalty for using 1MB stack size.2 MB Many large customers use this value for safety. No performance penalty.nqscheduler does not use the NQSConfig.INI file to set thread stack size.If this process crashes because the thread stack is too small, use this to set 2MB:export OBI_BACKGROUND_STACK_SIZE=2048 Shared libraries are not (shared) When application libraries are loaded at run-time, AIX makes a decision on whether to load the libraries in a "public" memory segment. If the filesystem library permissions do not have the "Read-Other" permission bit, AIX loads the library into private process memory with two significant side-effects:* The libraries reduce the heap storage available. Might be significant in 32-bit processes; irrelevant in 64-bit processes.* Library code is loaded into multiple real pages for execution; one copy for each process.Multiple execution images is a significant issue for both 32- and 64-bit processes.The "real memory pages" saved by using public memory segments is a minor concern. Today's machines typically have plenty of real memory.The real problem with private copies of libraries is that they consume processor cache blocks, which are limited. The same library instructions executing in different real pages will cause memory delays as the i-cache ( instruction cache 128KB blocks) are refreshed from real memory. Performance loss because instructions are delayed is something that is difficult to measure without access to low-level cache fault data. The machine just appears to be running slowly for no observable reason.This is an easy problem to detect, and an easy problem to correct.Detection: "genld -l" AIX command produces a list of the libraries used by each process and the AIX memory address where they are loaded.32-bit public segment is 13 ( "dxxxxxxx" ). private segments are 2-a.64-bit public segment is 9 ( "9xxxxxxxxxxxxxxx") ; private segment is 8.genld -l | grep -v ' d| 9' | sort +2provides a list of privately loaded libraries. Repair: chmod o+r <libname>AIX shared libraries will have a suffix of ".so" or ".a".Another technique is to change all libraries in a selected directory to repair those that might not be currently loaded. The usual directories that need repair are obiee code, httpd code and plugins, database client libraries and java.chmod o+r /shr/dir/*.a /shr/dir/*.so Configure your system for diagnosticsProduction systems shouldn't crash, and yet bad things happen to good software.If obiee software crashes and produces a core, you should configure your system for reliable transfer of the failing conditions to Oracle Tech Support. Here's what we need to be able to diagnose a core file from your system.* fullcore enabled. chdev -lsys0 -a fullcore=true* core naming enabled. chcore -n on -d* ulimit must not truncate core. see item 3.* pstack.sh is used to capture core documentation.* obidoc is used to capture current AIX configuration.* snapcore AIX utility captures core and libraries. Use the proper syntax. $ snapcore -r corename executable-fullpath /tmp/snapcore will contain the .pax.Z output file. It is compressed.* If cores are directed to a common directory, ensure obiee userid can write to the directory. ( chcore -p /cores -d ; chmod 777 /cores )The filesystem must have sufficient space to hold a crashing obiee application.Use: df -k Check the "Free" column ( not "% Used" ) 8388608 is 8GB. Disable Oracle Client Library signal handlingThe Oracle DB Client Library is frequently distributed with the sqlplus development kit.By default, the library enables a signal handler, which will document a call stack if the application crashes. The signal handler is not needed, and definitely disruptive to obiee diagnostics. It needs to be disabled. sqlnet.ora is typically located at: $ORACLE_HOME/network/admin/sqlnet.oraAdd this line at the top of the file: DIAG_SIGHANDLER_ENABLED=FALSE Disable async query in the RPD connection pool.This might be an obiee 10.1.3.4 issue only ( still checking )."async query" must be disabled in the connection pools.It was designed to enable query cancellation to a database, and turned out to have too many edge conditions in normal communication that produced random corruption of data and crashes. Please ensure it is turned off in the RPD. Check AIX error report (errpt).Errors external to obiee applications can trigger crashes. $ /bin/errpt -aHardware errors ( firmware, adapters, disks ) should be reported to IBM support.All application core files are recorded by AIX; the most recent ones are listed first. Reserved for something important to say.

Read the article

CodePlex Daily Summary for Friday, October 28, 2011

CodePlex Daily Summary for Friday, October 28, 2011Popular ReleasesWriteableBitmapEx: WriteableBitmapEx 0.9.8.5: Added a Rotate method for arbitrary angles (RotateFree). Provided by montago. See http://writeablebitmapex.codeplex.com/workitem/15214 Added Nokola's anti-aliased line drawing implementation. http://nokola.com/blog/post/2010/10/14/Anti-aliased-Lines-And-Optimizing-Code-for-Windows-Phone-7e28093First-Look.aspx Updated the Windows Phone project to WP 7.1 Mango. Added an extension file for the Windows Phone specific extensions and added the SaveToMediaLibrary extension including support fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...patterns & practices - Unity: Unity 3.0 for .NET4.5 Preview: The Unity 3.0.1026.0 Preview enables Unity to work on .NET 4.5 with both the WinRT and desktop profiles. The major changes include: Unity projects updated to target .NET 4.5. Dynamic build plans modified to use compiled lambda expressions instead of Reflection.Emit Converting reflection to use the new TypeInfo for reflection. Projects updated to work with the Microsoft Visual Studio 2011 Preview Notes/Known Issues: The Microsoft.Practices.Unity.UnityServiceLocator class cannot be use...Catel - WPF, Silverlight and Windows Phone 7 MVVM toolkit: 2.3: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com Documentation can be found at: http://catel.catenalogic.com ********************************************************** =========== Version 2.3 =========== Release date: ============= 2011/10/27 Added/fixed: ============ (+) Added new (non-generic) overloads in ServiceLocator for registering types (+) WP7 ...Managed Extensibility Framework: MEF 2 Preview 4: Detailed information on this release is available on the BCL team blog.AcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...SQL Backup Helper: SQL Backup Helper v1.0: Version 1.0 Changes Description added to settings table Automatic LOG files truncation added to BACKUP stored procedure Only database in status ONLINE will be backed upMySemanticSearch Sample: MySemanticSearch Installer (CTP3): Note: This release of the MySemanticSearch Sample works with SQL Server 2012 CTP3. Installation InstructionsDownload this self-extracting archive to your computer Execute the self-extracting archive Accept the licensing agreement Choose a target directory on your computer and extract the files Open Windows PowerShell command prompt with elevated priveleges Execute the following command: Set-ExecutionPolicy Unrestricted Close the Windows PowerShell command prompt Run C:\MySema...Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Improved the AcceptViewHintAttribute controller filter. Now a client can specify not only the name of a View or Partial View it prefers, but also to receive just the rough data in Json format. Fixed: Issue with partial thrust Cl...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...xUnit.net Contrib: xunitcontrib-resharper 0.4.4 (dotCover): xunitcontrib release 0.4.4 (ReSharper runner) This release provides a test runner plugin for Resharper 6.0 RTM, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release addresses the following issues:Support for dotCover code coverage 4132 Note that this build work against ALL VERSIONS of xunit. The files are compiled against xunit.dll 1.8 - DO NOT REPLACE THIS FILE. Thanks to xunit's version independent runner system, this package can r...Ribbon Editor for Microsoft Dynamics CRM 2011: Ribbon Editor (0.1.2122.266): Added CodePlex and PayPal links New icon Bug fix: can't connect to an IFD deployment when the discovery service url has been customizedSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.921.340): Added CodePlex and PayPal links New iconDotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...New Projects#foo REST: HashFoo.REST is a simple message based layer that sits on top of ASP.NET MVC. Allows for service development based on POCO message objects and handlers, while still using the ever improving ASP.NET MVC infrastructure.Activity Tracking Log: The Activity Tracking Log is a pluggable component intended to provide user and system activity tracking functions for ASP.Net/MVC applications. Represents a set of HTTP handlers and modules that expose activity analytic reports and client side API. Easy to configure and use.ACTLAPoC: ACTLAPoCAnalysis of algorithms: This is a collective repository for a few academic projects.Anomaly: Anomaly is an application that can be used for generating one or more passwords, with varying levels of complexity. Archer: A shopping bags app for Windows Phone 7.5 code name "Archer".ASMX WebService Logger: This project provide a library to provide asp.net asmx web service logging mechanism, include when who access which web method, the detailed request/respond soap content. Build Versioning Services: This project is essentially an assembly that contains a WCF Service and a set of accompanying MSBuild tasks. The service provides functionality to maintain version numbers for applications separately from the source code of the application. The MSBuild tasks provide the functionality the WCF service provides to build scripts.Church CRM - Bookstore: The Congregations Relationship management Suite is a suite of tools designed to provide web based services and organizational tools geared toward online Congregation and Church resource management and social interaction. Church CRM - Sermons: The Congregations Relationship management Suite is a suite of tools designed to provide web based services and organizational tools geared toward online Congregation and Church resource management and social interaction. DasLabs: das labsdedu: Dedu is a SNS&Fourm web site that share the material about programming technique Find Me XML: Help people find your project. Write a concise, reader-focused summary. Example: <project name> makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in <programming language>.GEMySiteLockDown: This nifty little application generates a batch file that, when run, will set the LOCK state of a chosen Site Collection and sub sites to either NoAdditions or Readonly or NoAccessHEP Linux Access: Tools that make it simpler to access linux computer from Windows. Especially geared towards Fermilab and CERN computing.iCycle: Simple cycle application that allows the tracking of exercises and routes.ImportToTS: Import to TSLegal Dashboard: legal dashboardLWB-DOTNET: This project contains ASP.NET Ajax support for the AJAX-Lightweight Binder. Mass Mailing: Mass Mailing is an application to allow for mailing of a single email to a large email list. It is written in c# with a WPF front end. Allows for attachments, multiple smtp servers, and burst control.MineCobalt: MineCobalt is a administration system for the MineCraft server.MLBLDetector: MLBLDetectormokodownloader: this is a simple tool used to download images from websitenetgod: netgod opensource projectNews Feed: News Feed is a Windows Phone App which makes it easier for users to check out the latest news, sports and technology headlines and opinions from various customizable news sources (default CNN, Guardian, Daily Mail, Ta Nea). Uses RSS feeds. Free to download and distribute.P I: P. I.Precious Metals Pricing - nopCommerce Plugin: This is a plugin for the nopCommerce 2.x e-commerce platform. It allows product pricing to be based on the changing market values of precious metals. This is useful for companies that sell items such as coins or jewelry where the sale price fluctuates with market trends.produksi: A production ticket system.Prose: Prose is an playground for an experimental JavaScript like language compiler. Eventually it will implement 0-CFA, CFA2, and a Tracing JITRazor Generator Contrib: This project extends the capabilities of the PrecompiledMvcViewEngine (part of Razor Generator project). It supports precompiled Razor views in multiple assemblies.Rootfus: ROOT Surface. An attempt to make the final step in a histogram based analysis visual and easy. This has been attempted in the field before but has always failed - scripts and text seem to be a more natural way to do this. This project is an experiment to see if it is possible to do it another way with some basic visual programming. Based on the ROOT tool (http://root.cern.ch). This is aimed squarly at people who use ROOT as a final analysis tool.SimpleWebService: SimpleWebServicesmetgbr: Autohandel smetgbrSound Recorder for Windows Phone 7: The Sound Recorder App for WP7 allows you to record, save and play sound on your windows phone device. Co - developped by Dimitris Gkanatsios and Konstantinos Kyriakopoulos. Free to download and distribute. Don't hesitate to send me your comments/questions/angry complaints.SQL Refactor: A tool to aid in the refactoring of large SQL statements. Provides a comparison between the original query and the refactored one as well as maintaining a history of the iterations.stargame: reserch game projectTask Parallel Library Helper: TPLHelper is a helper library for the Task Parallel Library in .NET 4.0. It aims to add the ability to queue tasks with dependancies and have them added to the scheduler once all dependant taks are completed, it will also have some common usage such as time taken.TeamView: Team view is a tool to help the project manager, team members take a better view to the view of progress, quality in the project.View weather forecasts for multiple cities on mobile devices: View current weather temperature, low & high, and icon for weather condition for multiple cities in a single page on mobile devices. Uses ASP.NET WebForms, jQuery Mobile.Web Service App.: This program is an simple example web service application.Windows Azure Storage Mapper: a library for azure storage WolfGenerator: Generation code on script-like language with some intresting features.Xaml to Code Converter: This tool converts xaml designer text in normal C# code.XAML Toolkit: This will eventually be a toolkit that supports WPF, WinRT and possibly Silverlight.????: ??，?????、????、????????

Read the article

Ball bouncing at a certain angle and efficiency computations

- by X Y

I would like to make a pong game with a small twist (for now). Every time the ball bounces off one of the paddles i want it to be under a certain angle (between a min and a max). I simply can't wrap my head around how to actually do it (i have some thoughts and such but i simply cannot implement them properly - i feel i'm overcomplicating things). Here's an image with a small explanation . One other problem would be that the conditions for bouncing have to be different for every edge. For example, in the picture, on the two small horizontal edges i do not want a perfectly vertical bounce when in the middle of the edge but rather a constant angle (pi/4 maybe) in either direction depending on the collision point (before the middle of the edge, or after). All of my collisions are done with the Separating Axes Theorem (and seem to work fine). I'm looking for something efficient because i want to add a lot of things later on (maybe polygons with many edges and such). So i need to keep to a minimum the amount of checking done every frame. The collision algorithm begins testing whenever the bounding boxes of the paddle and the ball intersect. Is there something better to test for possible collisions every frame? (more efficient in the long run,with many more objects etc, not necessarily easy to code). I'm going to post the code for my game: Paddle Class public class Paddle : Microsoft.Xna.Framework.DrawableGameComponent { #region Private Members private SpriteBatch spriteBatch; private ContentManager contentManager; private bool keybEnabled; private bool isLeftPaddle; private Texture2D paddleSprite; private Vector2 paddlePosition; private float paddleSpeedY; private Vector2 paddleScale = new Vector2(1f, 1f); private const float DEFAULT_Y_SPEED = 150; private Vector2[] Normals2Edges; private Vector2[] Vertices = new Vector2[4]; private List<Vector2> lst = new List<Vector2>(); private Vector2 Edge; #endregion #region Properties public float Speed { get {return paddleSpeedY; } set { paddleSpeedY = value; } } public Vector2[] Normal2EdgesVector { get { NormalsToEdges(this.isLeftPaddle); return Normals2Edges; } } public Vector2[] VertexVector { get { return Vertices; } } public Vector2 Scale { get { return paddleScale; } set { paddleScale = value; NormalsToEdges(this.isLeftPaddle); } } public float X { get { return paddlePosition.X; } set { paddlePosition.X = value; } } public float Y { get { return paddlePosition.Y; } set { paddlePosition.Y = value; } } public float Width { get { return (Scale.X == 1f ? (float)paddleSprite.Width : paddleSprite.Width * Scale.X); } } public float Height { get { return ( Scale.Y==1f ? (float)paddleSprite.Height : paddleSprite.Height*Scale.Y ); } } public Texture2D GetSprite { get { return paddleSprite; } } public Rectangle Boundary { get { return new Rectangle((int)paddlePosition.X, (int)paddlePosition.Y, (int)this.Width, (int)this.Height); } } public bool KeyboardEnabled { get { return keybEnabled; } } #endregion private void NormalsToEdges(bool isLeftPaddle) { Normals2Edges = null; Edge = Vector2.Zero; lst.Clear(); for (int i = 0; i < Vertices.Length; i++) { Edge = Vertices[i + 1 == Vertices.Length ? 0 : i + 1] - Vertices[i]; if (Edge != Vector2.Zero) { Edge.Normalize(); //outer normal to edge !! (origin in top-left) lst.Add(new Vector2(Edge.Y, -Edge.X)); } } Normals2Edges = lst.ToArray(); } public float[] ProjectPaddle(Vector2 axis) { if (Vertices.Length == 0 || axis == Vector2.Zero) return (new float[2] { 0, 0 }); float min, max; min = Vector2.Dot(axis, Vertices[0]); max = min; for (int i = 1; i < Vertices.Length; i++) { float p = Vector2.Dot(axis, Vertices[i]); if (p < min) min = p; else if (p > max) max = p; } return (new float[2] { min, max }); } public Paddle(Game game, bool isLeftPaddle, bool enableKeyboard = true) : base(game) { contentManager = new ContentManager(game.Services); keybEnabled = enableKeyboard; this.isLeftPaddle = isLeftPaddle; } public void setPosition(Vector2 newPos) { X = newPos.X; Y = newPos.Y; } public override void Initialize() { base.Initialize(); this.Speed = DEFAULT_Y_SPEED; X = 0; Y = 0; NormalsToEdges(this.isLeftPaddle); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); paddleSprite = contentManager.Load<Texture2D>(@"Content\pongBar"); } public override void Update(GameTime gameTime) { //vertices array Vertices[0] = this.paddlePosition; Vertices[1] = this.paddlePosition + new Vector2(this.Width, 0); Vertices[2] = this.paddlePosition + new Vector2(this.Width, this.Height); Vertices[3] = this.paddlePosition + new Vector2(0, this.Height); // Move paddle, but don't allow movement off the screen if (KeyboardEnabled) { float moveDistance = Speed * (float)gameTime.ElapsedGameTime.TotalSeconds; KeyboardState newKeyState = Keyboard.GetState(); if (newKeyState.IsKeyDown(Keys.Down) && Y + paddleSprite.Height + moveDistance <= Game.GraphicsDevice.Viewport.Height) { Y += moveDistance; } else if (newKeyState.IsKeyDown(Keys.Up) && Y - moveDistance >= 0) { Y -= moveDistance; } } else { if (this.Y + this.Height > this.GraphicsDevice.Viewport.Height) { this.Y = this.Game.GraphicsDevice.Viewport.Height - this.Height - 1; } } base.Update(gameTime); } public override void Draw(GameTime gameTime) { spriteBatch.Begin(SpriteSortMode.Texture,null); spriteBatch.Draw(paddleSprite, paddlePosition, null, Color.White, 0f, Vector2.Zero, Scale, SpriteEffects.None, 0); spriteBatch.End(); base.Draw(gameTime); } } Ball Class public class Ball : Microsoft.Xna.Framework.DrawableGameComponent { #region Private Members private SpriteBatch spriteBatch; private ContentManager contentManager; private const float DEFAULT_SPEED = 50; private float speedIncrement = 0; private Vector2 ballScale = new Vector2(1f, 1f); private const float INCREASE_SPEED = 50; private Texture2D ballSprite; //initial texture private Vector2 ballPosition; //position private Vector2 centerOfBall; //center coords private Vector2 ballSpeed = new Vector2(DEFAULT_SPEED, DEFAULT_SPEED); //speed #endregion #region Properties public float DEFAULTSPEED { get { return DEFAULT_SPEED; } } public Vector2 ballCenter { get { return centerOfBall; } } public Vector2 Scale { get { return ballScale; } set { ballScale = value; } } public float SpeedX { get { return ballSpeed.X; } set { ballSpeed.X = value; } } public float SpeedY { get { return ballSpeed.Y; } set { ballSpeed.Y = value; } } public float X { get { return ballPosition.X; } set { ballPosition.X = value; } } public float Y { get { return ballPosition.Y; } set { ballPosition.Y = value; } } public Texture2D GetSprite { get { return ballSprite; } } public float Width { get { return (Scale.X == 1f ? (float)ballSprite.Width : ballSprite.Width * Scale.X); } } public float Height { get { return (Scale.Y == 1f ? (float)ballSprite.Height : ballSprite.Height * Scale.Y); } } public float SpeedIncreaseIncrement { get { return speedIncrement; } set { speedIncrement = value; } } public Rectangle Boundary { get { return new Rectangle((int)ballPosition.X, (int)ballPosition.Y, (int)this.Width, (int)this.Height); } } #endregion public Ball(Game game) : base(game) { contentManager = new ContentManager(game.Services); } public void Reset() { ballSpeed.X = DEFAULT_SPEED; ballSpeed.Y = DEFAULT_SPEED; ballPosition.X = Game.GraphicsDevice.Viewport.Width / 2 - ballSprite.Width / 2; ballPosition.Y = Game.GraphicsDevice.Viewport.Height / 2 - ballSprite.Height / 2; } public void SpeedUp() { if (ballSpeed.Y < 0) ballSpeed.Y -= (INCREASE_SPEED + speedIncrement); else ballSpeed.Y += (INCREASE_SPEED + speedIncrement); if (ballSpeed.X < 0) ballSpeed.X -= (INCREASE_SPEED + speedIncrement); else ballSpeed.X += (INCREASE_SPEED + speedIncrement); } public float[] ProjectBall(Vector2 axis) { if (axis == Vector2.Zero) return (new float[2] { 0, 0 }); float min, max; min = Vector2.Dot(axis, this.ballCenter) - this.Width/2; //center - radius max = min + this.Width; //center + radius return (new float[2] { min, max }); } public void ChangeHorzDirection() { ballSpeed.X *= -1; } public void ChangeVertDirection() { ballSpeed.Y *= -1; } public override void Initialize() { base.Initialize(); ballPosition.X = Game.GraphicsDevice.Viewport.Width / 2 - ballSprite.Width / 2; ballPosition.Y = Game.GraphicsDevice.Viewport.Height / 2 - ballSprite.Height / 2; } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); ballSprite = contentManager.Load<Texture2D>(@"Content\ball"); } public override void Update(GameTime gameTime) { if (this.Y < 1 || this.Y > GraphicsDevice.Viewport.Height - this.Height - 1) this.ChangeVertDirection(); centerOfBall = new Vector2(ballPosition.X + this.Width / 2, ballPosition.Y + this.Height / 2); base.Update(gameTime); } public override void Draw(GameTime gameTime) { spriteBatch.Begin(); spriteBatch.Draw(ballSprite, ballPosition, null, Color.White, 0f, Vector2.Zero, Scale, SpriteEffects.None, 0); spriteBatch.End(); base.Draw(gameTime); } } Main game class public class gameStart : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; public gameStart() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; this.Window.Title = "Pong game"; } protected override void Initialize() { ball = new Ball(this); paddleLeft = new Paddle(this,true,false); paddleRight = new Paddle(this,false,true); Components.Add(ball); Components.Add(paddleLeft); Components.Add(paddleRight); this.Window.AllowUserResizing = false; this.IsMouseVisible = true; this.IsFixedTimeStep = false; this.isColliding = false; base.Initialize(); } #region MyPrivateStuff private Ball ball; private Paddle paddleLeft, paddleRight; private int[] bit = { -1, 1 }; private Random rnd = new Random(); private int updates = 0; enum nrPaddle { None, Left, Right }; private nrPaddle PongBar = nrPaddle.None; private ArrayList Axes = new ArrayList(); private Vector2 MTV; //minimum translation vector private bool isColliding; private float overlap; //smallest distance after projections private Vector2 overlapAxis; //axis of overlap #endregion protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); paddleLeft.setPosition(new Vector2(0, this.GraphicsDevice.Viewport.Height / 2 - paddleLeft.Height / 2)); paddleRight.setPosition(new Vector2(this.GraphicsDevice.Viewport.Width - paddleRight.Width, this.GraphicsDevice.Viewport.Height / 2 - paddleRight.Height / 2)); paddleLeft.Scale = new Vector2(1f, 2f); //scale left paddle } private bool ShapesIntersect(Paddle paddle, Ball ball) { overlap = 1000000f; //large value overlapAxis = Vector2.Zero; MTV = Vector2.Zero; foreach (Vector2 ax in Axes) { float[] pad = paddle.ProjectPaddle(ax); //pad0 = min, pad1 = max float[] circle = ball.ProjectBall(ax); //circle0 = min, circle1 = max if (pad[1] <= circle[0] || circle[1] <= pad[0]) { return false; } if (pad[1] - circle[0] < circle[1] - pad[0]) { if (Math.Abs(overlap) > Math.Abs(-pad[1] + circle[0])) { overlap = -pad[1] + circle[0]; overlapAxis = ax; } } else { if (Math.Abs(overlap) > Math.Abs(circle[1] - pad[0])) { overlap = circle[1] - pad[0]; overlapAxis = ax; } } } if (overlapAxis != Vector2.Zero) { MTV = overlapAxis * overlap; } return true; } protected override void Update(GameTime gameTime) { updates += 1; float ftime = 5 * (float)gameTime.ElapsedGameTime.TotalSeconds; if (updates == 1) { isColliding = false; int Xrnd = bit[Convert.ToInt32(rnd.Next(0, 2))]; int Yrnd = bit[Convert.ToInt32(rnd.Next(0, 2))]; ball.SpeedX = Xrnd * ball.SpeedX; ball.SpeedY = Yrnd * ball.SpeedY; ball.X += ftime * ball.SpeedX; ball.Y += ftime * ball.SpeedY; } else { updates = 100; ball.X += ftime * ball.SpeedX; ball.Y += ftime * ball.SpeedY; } //autorun :) paddleLeft.Y = ball.Y; //collision detection PongBar = nrPaddle.None; if (ball.Boundary.Intersects(paddleLeft.Boundary)) { PongBar = nrPaddle.Left; if (!isColliding) { Axes.Clear(); Axes.AddRange(paddleLeft.Normal2EdgesVector); //axis from nearest vertex to ball's center Axes.Add(FORMULAS.NormAxisFromCircle2ClosestVertex(paddleLeft.VertexVector, ball.ballCenter)); } } else if (ball.Boundary.Intersects(paddleRight.Boundary)) { PongBar = nrPaddle.Right; if (!isColliding) { Axes.Clear(); Axes.AddRange(paddleRight.Normal2EdgesVector); //axis from nearest vertex to ball's center Axes.Add(FORMULAS.NormAxisFromCircle2ClosestVertex(paddleRight.VertexVector, ball.ballCenter)); } } if (PongBar != nrPaddle.None && !isColliding) switch (PongBar) { case nrPaddle.Left: if (ShapesIntersect(paddleLeft, ball)) { isColliding = true; if (MTV != Vector2.Zero) ball.X += MTV.X; ball.Y += MTV.Y; ball.ChangeHorzDirection(); } break; case nrPaddle.Right: if (ShapesIntersect(paddleRight, ball)) { isColliding = true; if (MTV != Vector2.Zero) ball.X += MTV.X; ball.Y += MTV.Y; ball.ChangeHorzDirection(); } break; default: break; } if (!ShapesIntersect(paddleRight, ball) && !ShapesIntersect(paddleLeft, ball)) isColliding = false; ball.X += ftime * ball.SpeedX; ball.Y += ftime * ball.SpeedY; //check ball movement if (ball.X > paddleRight.X + paddleRight.Width + 2) { //IncreaseScore(Left); ball.Reset(); updates = 0; return; } else if (ball.X < paddleLeft.X - 2) { //IncreaseScore(Right); ball.Reset(); updates = 0; return; } base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Aquamarine); spriteBatch.Begin(SpriteSortMode.BackToFront, BlendState.AlphaBlend); spriteBatch.End(); base.Draw(gameTime); } } And one method i've used: public static Vector2 NormAxisFromCircle2ClosestVertex(Vector2[] vertices, Vector2 circle) { Vector2 temp = Vector2.Zero; if (vertices.Length > 0) { float dist = (circle.X - vertices[0].X) * (circle.X - vertices[0].X) + (circle.Y - vertices[0].Y) * (circle.Y - vertices[0].Y); for (int i = 1; i < vertices.Length;i++) { if (dist > (circle.X - vertices[i].X) * (circle.X - vertices[i].X) + (circle.Y - vertices[i].Y) * (circle.Y - vertices[i].Y)) { temp = vertices[i]; //memorize the closest vertex dist = (circle.X - vertices[i].X) * (circle.X - vertices[i].X) + (circle.Y - vertices[i].Y) * (circle.Y - vertices[i].Y); } } temp = circle - temp; temp.Normalize(); } return temp; } Thanks in advance for any tips on the 4 issues. EDIT1: Something isn't working properly. The collision axis doesn't come out right and the interpolation also seems to have no effect. I've changed the code a bit: private bool ShapesIntersect(Paddle paddle, Ball ball) { overlap = 1000000f; //large value overlapAxis = Vector2.Zero; MTV = Vector2.Zero; foreach (Vector2 ax in Axes) { float[] pad = paddle.ProjectPaddle(ax); //pad0 = min, pad1 = max float[] circle = ball.ProjectBall(ax); //circle0 = min, circle1 = max if (pad[1] < circle[0] || circle[1] < pad[0]) { return false; } if (Math.Abs(pad[1] - circle[0]) < Math.Abs(circle[1] - pad[0])) { if (Math.Abs(overlap) > Math.Abs(-pad[1] + circle[0])) { overlap = -pad[1] + circle[0]; overlapAxis = ax * (-1); } //to get the proper axis } else { if (Math.Abs(overlap) > Math.Abs(circle[1] - pad[0])) { overlap = circle[1] - pad[0]; overlapAxis = ax; } } } if (overlapAxis != Vector2.Zero) { MTV = overlapAxis * Math.Abs(overlap); } return true; } And part of the Update method: if (ShapesIntersect(paddleRight, ball)) { isColliding = true; if (MTV != Vector2.Zero) { ball.X += MTV.X; ball.Y += MTV.Y; } //test if (overlapAxis.X == 0) //collision with horizontal edge { } else if (overlapAxis.Y == 0) //collision with vertical edge { float factor = Math.Abs(ball.ballCenter.Y - paddleRight.Y) / paddleRight.Height; if (factor > 1) factor = 1f; if (overlapAxis.X < 0) //left edge? ball.Speed = ball.DEFAULTSPEED * Vector2.Normalize(Vector2.Reflect(ball.Speed, (Vector2.Lerp(new Vector2(-1, -3), new Vector2(-1, 3), factor)))); else //right edge? ball.Speed = ball.DEFAULTSPEED * Vector2.Normalize(Vector2.Reflect(ball.Speed, (Vector2.Lerp(new Vector2(1, -3), new Vector2(1, 3), factor)))); } else //vertex collision??? { ball.Speed = -ball.Speed; } } What seems to happen is that "overlapAxis" doesn't always return the right one. So instead of (-1,0) i get the (1,0) (this happened even before i multiplied with -1 there). Sometimes there isn't even a collision registered even though the ball passes through the paddle... The interpolation also seems to have no effect as the angles barely change (or the overlapAxis is almost never (-1,0) or (1,0) but something like (0.9783473, 0.02743843)... ). What am i missing here? :(

Read the article

CodePlex Daily Summary for Wednesday, June 08, 2011

CodePlex Daily Summary for Wednesday, June 08, 2011Popular ReleasesHTML-IDEx: HTML-IDEx .15 ALPHA: This release fixes line counting a little bit and adds the masshighlight() sub, which highlights pasted and inserted code.AutoLoL: AutoLoL v2.0.3: - Improved summoner spells are now displayed - Fixed some of the startup errors people got - Double clicking an item selects it - Some usability changes that make using AutoLoL just a little easier - Bug fixesVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.SharePoint Search XSL Samples: SharePoint 2010 Samples: I have updated some of the samples from the 2007 release. These all work in SharePoint 2010. I removed the Pivot on File Extension because SharePoint 2010 search has refiners that perform the same function.SCCM Client Actions Tool: SCCM Client Actions Tool v0.5: SCCM Client Actions Tool v0.5 is currently the most stable version and includes all of the functionality requested so far. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively available starting from Windows Vista. Config.ini – A configuration file for default settings. This file is...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????Media Companion: MC 3.405-3 latest patch: -1 Added ability to choose to rename invalid nfos to info -2 Fix for multipart episodes not showing / Fix to skip invalid nfo's during rebuild -3 If movie plot empty use outline This file is just the mediacompanion.exe It has the cutting edge bug fixes as they are fixed during the week. The patch file number will be referred to in the relevant issue tracker comment. For the latest full program, you need to download the relevant weekly plus the patch.WatchersNET.TagCloud: WatchersNET.TagCloud 02.00.01: changes Module Packages are now generated with MSBuild Added Cancel Edit Button to Cancel an Custom Tag Edit Fixed Issue #14 editing of custom tags Fixed Issue with Flash File and Google BotVFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishOnTopReplica: Release 3.3.2: Incremental update over 3.3 and 3.3.1. Added Polish language translation (thanks to Jan Romanczyk). Added German language translation (thanks to Eric Hoffmann). Fixed some localization issues.SQL Compact Query Analyzer: Build 0.3.0.0: Beta build of SQL Compact Query Analyzer Features: - Execute SQL Queries against a SQL Server Compact Edition database - Easily edit the contents of the database - Supports SQLCE 3.1, 3.5 and 4.0 Prerequisites: - .NET Framework 4.0ShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.Babylon Toolkit: Babylon.Toolkit v1.0.4: Note about samples: In order to run samples, you need to configure visual studio to run them as an "Out-of-browser application". in order to do that, go to the property page of a sample project, go to the Debug tab, and check the "Out-of-browser application" radio. New features : New Effects BasicEffect3Lights (3 dir lights instead of 1 position light) CartoonEffect (work in progress) SkinnedEffect (with normal and specular map support) SplattingEffect (for multi-texturing with smooth ...SizeOnDisk: 1.0.8.2: With installerTerrariViewer: TerrariViewer v2.5: Added new items associated with Terraria v1.0.3 to the character editor. Fixed multiple bugs with Piggy Bank EditorySterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...Grammar and Spell Checking Plugin for Windows Live Writer: Grammar Checker Plugin v1.0: First version of the grammar checker plugin for Windows Live Writer. You can show your appreciation for this plugin and support further development by donating via PayPal. Any amount will be appreciated. Thank you. Donatepatterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...Claims Based Identity & Access Control Guide: Release Candidate: Highlights of this release This is the release candidate drop of the new "Claims Identity Guide" edition. In this release you will find: All code samples, including all ACS v2: ACS as a Federation Provider - Showing authentication with LiveID, Google, etc. ACS as a FP with Multiple Business Partners. ACS and REST endpoints. Using a WP7 client with REST endpoints. All ACS specific chapters. Two new chapters on SharePoint (SSO and Federation) All revised v1 chapters We are now ...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.New ProjectsAmur: Amur is a programming language project that allows the team members to explore functional programming language design. The compiler will target .NET and, for now, be developed in C#.Arche: Arche makes it easier for devlopers to architecture base with code generators. It's developed in C#. Avignon: A WPF version of the board game Carcassonne.Code Exercises in C#: A few c# files to demonstrate coding abilityCows And Bulls Project: Per tutti gli sviluppatori dotNET Che vogliono ritrovarsi per parlare di qualsiasi metodologia di sviluppo Agile Il Cows And Bulls Project È un progetto CodePlex Che si pone l'obiettivo di promuovere la discussione e lo scambio di esperienze sullo sviluppo Agile del software A differenza di altri progetti open source Il nostro progetto non utilizza la comunità per migliorare il codice sorgente ma usa il codice sorgente per migliorare una comunità Grazie molte a Stefania Menocci che h...CRM 2011 Workflow Utilities: This project includes custom workflow activities for CRM 2011 which provide additional workflow steps for actions such as "delete" and "share" within the CRM Process designer. These activities can be used in both workflows and dialogs but are not supported in CRM Online. Dot Net Reflector: OPEN SOURCE AND FREE Reflector. Let it be said right now. Dot Net Reflector forever will be free and here on codeplex.Exemplo de TFS do Papo: Projeto para testar conexao do TFS com Windows Phone 7Extended WCF Discovery: Extend the WCF discovery to support: 1. Service publish its real service address - such as external IP when service is behind NAT 2. Client discovery over any network topology (behind NAT) Also (in the roadmap): Binding discovery-clients will receive the binding from the server.FileProtector: This will make it easy for any user to protect their personal files. It's developed completely using C#Fingertip detection via OpenNI: "Fingertip Detection" prject is intended to give usual PC user availability to control PC unsing only hand and finger gestures. Project is built on .NET framework. Used technologies : 1. OpenNI 2. NITE 3. EmguCVHomeData: Stores and displays data from the household.Informicus LibraryHub: 4VasiliyLifeHelper: lifehelperMaxZhang.EasyEntities: EasyEntitiesMedianamik: MedianamikMethodWorx CMS: Open Source .NET CMS for fully hosted solutions, or integration into ASP.NET and ASP.NET MVC projects. Microsoft Tag API for BlackBerry: Microsoft Tag is a compact, yet, data rich and user friendly tag system. This API allows for accessing and using Tags.MVVM Demo: A MVVM demoMyReportSL: My Report SiverlightNSS College Website: An effort to develop an open source website for NSS College, Rajakumari with the contributions from its current students and alumni...Oldies: Deletes or moves old files from current folderPhaLinks a Modern Native Lisp: PhaLinks is a modern lips with a custom VM that runs on PyPy. ProdUI: ProdUI is designed to be used when a GUI needs to be manipulated automatically (Prodded), either for testing, or to perform human UI interactions for data entry on systems that don't allow back-end access. The ProdUI toolset is developed in C#, using the UI Automation API and failing back on Win32 calls if that fails. Every attempt is made to verify that the action was actually performed, and proper notification if not.The system is designed to allow for single "off the cuff" prods, as well ...ResourceManager: A tool to allow relationships between various resources to be established and to show the effects of altering one resource on others. This is initially intended for use of keeping track of servers and licenses used by applications, but I'm hoping to leave it open to expansion.seriesCounter: SeriesCounter makes it easier for people that watch series to keep track at what episode of a series they are. You'll no longer have to remember it yourself. It's developed in C#.Shai Chi Android: Shai Chi AndroidSistemaControleMultas_LPUNICAP: Nada a declararSmarx Role: Smarx Role is a Windows Azure role that supports publishing web applications written in Node.js, Ruby, and Python. Apps are published/synchronized via Git or blob storage, allowing nearly instantaneous changes to published applications. It automatically pulls in dependent modules using each language's package manager (npm, Gem, or pip).Tetris3D: try to complete a 3D tetris cloneTrackMania WebServices SDK .NET: TrackMania WebServices SDK .NET is a .NET 4 library which provide every tools to get statistics from TrackMania ForeverTV Program Analyst: A TV program analyzing software, based on specific program log from tv stations. VB.net Roguelike: This is an attempt to make a Roguelike in VB.net. This is in it's very early stages, and any help would be appreciated! Definition of Roguelike: (from Wikipedia) The roguelike is a sub-genre of role-playing video games, characterized by randomization for replayability, permanent death, and turn-based movement. Most roguelikes feature ASCII graphics, with newer ones increasingly offering tile-based graphics. Games are typically dungeon crawls, with many monsters, items, and environmental f...Wbfs Engine: Provides a simple and easy to use library for accessing games and wbfs partitions with .NET

Search Results

Search found 12437 results on 498 pages for 'normal mapping'.

Page 493/498 | < Previous Page | 489 490 491 492 493 494 495 496 497 498 | Next Page >

- by fdf33

- by user406470

- by mvladic

- by me

- by Rick

- by Oddthinking

- by Sherry LaMonica-Oracle

- by Stargazer712

- by Mark S. Rasmussen

- by Ian Sellar

- by Thomas Weller

- by user9154181

- by Mark

- by exo_cw

- by Phil Factor

- by GruffTech

- by user554629

- by X Y

< Previous Page | 489 490 491 492 493 494 495 496 497 498 | Next Page >