Search Results

Search found 15875 results on 635 pages for 'border box'.

Page 495/635 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

  • Traffic Shaping using tc

    - by Simon
    Hi guys, I have a 1.5 Mbit/s link that i want to share with 150 users. My setup is the following: Linux box with 3 NICs eth0 - public ip eth1 - subnet A - 50 users (static ips) eth2 - subnet B - 100 users (via dhcp) I am using squid as a transparent proxy on port 3128. dhcp server using ports 67 and 68. I was creating, but I think packets are not going to the right queues #!/bin/bash DEV=eth0 RATE_MAIN=2048kbit CEIL_MAIN=2048kbit BURST=1b CBURST=1b RATE_DEFAULT=1024kbit CEIL_DEFAULT=$CEIL_MAIN PRIO_DEFAULT=3 RATE_P2P=1024Kbit CEIL_P2P=$CEIL_MAIN PRIO_P2P=4 RATE_IND=32kbit CEIL_IND=$CEIL_DEFAULT tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $RATE_MAIN ceil $CEIL_MAIN tc class add dev $DEV parent 1:1 classid 1:10 htb rate $RATE_DEFAULT ceil $CEIL_MAIN burst $BURST cburst $CBURST prio $PRIO_WEB ## some other sub class for p2p other traffic tc class add dev $DEV parent 1:1 classid 1:20 htb rate $RATE_P2P ceil $CEIL_P2P burst $BURST cburst $CBURST prio $PRIO_P2P $IPS_NET1=50 $IPS_NET2=100 let $IPS=$IPS_NET1+$IPS_NET2 for ((i=1; i<= $IPS; i++)) do let CLASSID=($i+100) let HANDLE=($i+100) tc class add dev $DEV parent 1:10 classid 1:$CLASSID htb rate $RATE_IND ceil $CEIL_IND tc qdisc add dev $DEV parent 1:$CLASSID handle $HANDLE: sfq perturb 10 done ## Generate IP addresses ## IP_ADDRESSES="" # Subnet A BASE_IP=10.10.10. for ((i=2; i<=$IPS_NET1+1; i++)) do TEMP="$BASE_IP$i" IP=ADDRESSES="$IP_ADDRESSES $TEMP" done # Subnet B BASE_IP=192.168.0. for ((i=2; i<=$IPS_NET2+1; i++)) do TEMP="$BASE_IP$i" IP_ADDRESSES="$IP_ADDRESSES $TEMP" done ## FILTERS ## j=1 U32="tc filter add dev $DEV protocol ip parent 1:0 prio $PRIO_DEFAULT u32" for NET in $IP_ADDRESSES; do let CLASSID=($j+100) $U32_DEFAULT match ip src $NET/32 flowid 1:$CLASSID $U32_DEFAULT match ip dst $NET/32 flowid 1:$CLASSID let j=j+1 done Can you guys help me figure out what's wrong with it? basically I want my classes to be 1:1 (1.5 Mbit ) 1:10 (1024 Kbit) 1:20 (1024 Kbit) (200 ips each with 32 kbit)

    Read the article

  • Linksys/Cisco Small Business SRW-Series (ie SRW248G4) - Overcoming the Limitations

    - by Warren P
    We just purchased a Cisco/Linksys SRW 248G4 switch to try it out. We have always had unmanaged switches before, and this is our first "somewhat managed" switch. So far the major limitations are: Only Internet Explorer 6 (manual says IE 5.5!) works for the web interface SSH exists but is not practically useable because the only key length that is supported is no longer even used by most modern SSH installs. (I get the error "RSA modulus too small" in openssh 4.x/5.x) This is with the latest firmware revision, I believe, although Cisco's website does not actually tell you what version you're downloading. All in all, I think, they must be trying to tell me that if I want a good-quality switch, I shouldn't buy these SRWs and should buy a Dell or an HP ProCurve, or save up my pennies, and buy a Catalyst. The question here, then, at long last: Has anyone gotten the web-browser to work via some IE 7 or IE 8 compatibility mode settings or used another browser (Opera? KDE/Safari/WebKit?) and spoofed IE6? Is there any way to get the SSH key length upgraded? I'm guessing a 0% chance of a yes on that last one. I found an XP machine, used telnet (via PuttyTel.exe) and IE6 to set this up, and I doubt we'll have to touch it again. Which is fine with us. But it would be nice if I could administer this thing from either (a) a linux box, or (b) my primary desktop which is windows 7. It looks like XPMode with IE6 on the virtual XP machine may be my only way to administer this type of switch via the web.

    Read the article

  • haproxy and tomcat intermittent hangs

    - by user7347
    I am trying to run haproxy in front of tomcat on a Solaris x86 box, but I am getting intermittent failures. At seemingly random intervals, the request just hangs until haproxy times out the connection. I thought maybe it was my app, but I've been able to reproduce it with the tomcat manager app, and hitting tomcat directly there is no problems at all. Hitting it repeatedly with curl will cause the error within 10-15 tries curl -ikL http://admin:admin@<my server>:81/manager/status haproxy is running on port 81, tomcat on port 7000. haproxy returns a 504 gateway timeout to the client, and puts this into the log file: Sep 7 21:39:53 localhost haproxy[16887]: xxx.xxx.xxx.xxx:65168 [07/Sep/2009:21:39:23.005] http_proxy http_proxy/tomcat7000 5/0/0/-1/30014 504 194 - - sHNN 0/0/0/0/0 0/0 "GET /manager/status HTTP/1.1" Tomcat shows nothing, no error in the logs and no indication that the request ever makes it to the tomcat server. The request count is not incremented, the manager app only shows activity on one thread, serving up the manager app. Here are my haproxy and tomcat connector settings, I've been playing with both a good deal trying to chase down the issue, so they may not be ideal, but they definitely don't seem like they should cause this error. server.xml <Connector port="7000" protocol="HTTP/1.1" enableLookups="false" maxKeepAliveRequests="1" connectionLinger="10" /> haproxy config global log loghost local0 chroot /var/haproxy listen http_proxy :81 mode http log global option httplog option httpclose clitimeout 150000 srvtimeout 30000 contimeout 3000 balance roundrobin cookie SERVERID insert server tomcat7000 127.0.0.1:7000 cookie server00 check inter 2000

    Read the article

  • Folder Redirection Issues - Freezing, Strange Warnings

    - by JCardenas
    I have Folder Redirection set up in a test environment for a couple accounts. I have followed the instructions for setting up the folder security settings here, and I can confirm that folders are created automatically by the system with the correct security settings when a user logs in. The GPO has been configured to automatically move user files up to the redirected folders, and this is working properly. Problems start occurring when a Windows 7 PC is in use. It is rare, but Explorer will lock up when performing a file write operation (move/copy/save from application). This results in the entire system being unusable, with only a hard reset resolving it (Task Manager doesn't start, the "three finger salute" does nothing, apps stop working). The mouse functions, but clicks do nothing. The other issue is that occasionally when copying/creating/modifying files a dialog box will pop up with the message "You need permission to perform this action. You require permission from XYZ\cardenas to make changes to this folder." The folder that was created by copying an existing one has the correct security settings and lists me as the owner. My company will not be implementing Folder Redirection on XP, since we are making a "clean break" with implementing new technologies with the Windows 7 rollout, so this behavior has not been - nor will be - checked for in XP. Thanks in advance for your help!

    Read the article

  • Can't remotely connect through SQL Server Management Studio

    - by FAtBalloon
    I have setup a SQL Server 2008 Express instance on a dedicated Windows 2008 Server hosted by 1and1.com. I cannot connect remotely to the server through management studio. I have taken the following steps below and am beyond any further ideas. I have researched the site and cannot figure anything else out so please forgive me if I missed something obvious, but I'm going crazy. Here's the lowdown. The SQL Server instance is running and works perfectly when working locally. In SQL Server Management Studio, I have checked the box "Allow Remote Connections to this Server" I have removed any external hardware firewall settings from the 1and1 admin panel Windows firewall on the server has been disabled, but just for kicks I added an inbound rule that allows for all connections on port 1433. In SQL Native Client configuration, TCP/IP is enabled. I also made sure the "IP1" with the server's IP address had a 0 for dynamic port, but I deleted it and added 1433 in the regular TCP Port field. I also set the "IPALL" TCP Port to 1433. In SQL Native Client configuration, SQL Server Browser is also running and I also tried adding an ALIAS in the I restarted SQL server after I set this value. Doing a "netstat -ano" on the server machine returns a TCP 0.0.0.0:1433 LISTENING UDP 0.0.0.0:1434 LISTENING I do a port scan from my local computer and it says that the port is FILTERED instead of LISTENING. I also tried to connect from Management studio on my local machine and it is throwing a connection error. Tried the following server names with SQL Server and Windows Authentication marked in the database security. ipaddress\SQLEXPRESS,1433 ipaddress\SQLEXPRESS ipaddress ipaddress,1433 tcp:ipaddress\SQLEXPRESS tcp:ipaddress\SQLEXPRESS,1433

    Read the article

  • Using GitOAuthPlugin for Jenkins - not working as expected

    - by Blundell
    I need some clarity and maybe a fix. I'm using this plugin to authorise who views our Jenkins ci server: https://wiki.jenkins-ci.org/display/JENKINS/Github+OAuth+Plugin As I understand it anyone who is auth'd to view one of our github project's can also login to our Jenkins box. This works I thought it would also allow the person logging in to only view the Project that they have GitHub permission on. For instance. Three projects on GitHub (A,B,C). Three builds on Jenkins. User 1 has Git access to all 3 projects (A B C). User 2 has Git access to only 1 project (A). When logging into Jenkins: User 1 can see all 3 projects ( this works ) User 2 can only see project A The problem is User 2 can also see all 3 projects when they should only see 1! Have I got this correct, and if so is this a bug? I have the settings set in Jenkins configuration Github Authorization Settings. Here we have some admin users. One organization. And none out of the 4 checkboxes ticked. (User 2, is not an admin, is not part of the org). The plugin is open sourced here: https://github.com/mocleiri/github-oauth-plugin I was trying to get Jenkins to print me the Logs from the plugin but I also failed at viewing these (to see if there was an issue). I followed these instructions: https://wiki.jenkins-ci.org/display/JENKINS/Logging It's the same concept as outlined below but using GitHub rather than manually selecting users: https://wiki.jenkins-ci.org/display/JENKINS/2012/01/03/Allow+access+to+specific+projects+for+Users%28Assigning+security+for+projects+in+Jenkins%29 Have I got this right or wrong? Is it possible to auth a Jenkins user to only see one project?

    Read the article

  • Windows Server 2008 Create Symbolic Link, updated Security Policy still gives privilege error

    - by Matt
    Windows Server 2008, RC2. I am trying to create a symbolic/soft link using the mklink command: mklink /D LinkName TargetDir e.g. c:\temp\>mklink /D foo bar This works fine if I run the command line as Administrator. However, I need it to work for regular users as well, because ultimately I need another program (executing as a user) to be able to do this. So, I updated the Local Security Policy via secpol.msc. Under "Local Policies" "User Rights Management" "Create symbolic links", I added "Users" to the security setting. I rebooted the machine. It still didn't work. So I added "Everyone" to the policy. Rebooted. And STILL it didn't work. What on earth am I doing wrong here? I think my user is even an Administrator on this box, and running plain command line even with this updated policy in place still gives me: You do not have sufficient privilege to perform this operation.

    Read the article

  • Network monitoring tools with API features

    - by Kev
    We use ks-soft's Advanced Hostmonitor package to monitor around 2000 items on our network. We think it's great, the chap that supports it is fantastic, the product is fast, stable and mature but I feel as as we grow as a company it's beginning to show some friction points in the area of integration with our back office admin systems. One of the things we'd like to do is be able to add new tests to whatever monitoring tool we use via an API. For example, when orders for servers come from our retail interface, the server gets built automatically, and as part of the automated build process we'd like to automatically add new tests to the network monitoring systems. Hostmonitor has some support for this via a feature called HM Script but we're starting to encounter some speedbumps - we can't add new operators/users we can't define new "Action Profiles" - these are the actions to be taken when a test goes good or bad. What we love about hostmonitor though are the Action Profiles. For example if a Windows IIS box goes bad our action profile for a bad test does something like: Check host again (one time) Wait another 30 seconds then test again Try restart app pool on remote machine (up to two times) Send an email to ops about the restart failure Try restarting IIS on remote machine (up to four times) Page duty admin (up to 5 times - stops after duty admin ACKS alert) Page backup duty admin (5 times - stops after duty admin ACKS alert) I'm starting to look around at other network monitoring tools and I'm looking for: a comprehensive API to be able to add/remove/control tests/test "action profiles"/operators (not just plugins, we need control and admin interfaces) the ability to have quite detailed action/escalation profiles (and define these via an API) I've looked at Nagios and Icinga but Ican't seem to glean from their documentation whether we could have these features or not, or if we could, how much work would be involved to implement/customise. Can anyone provide any advice, guidance or experiences?

    Read the article

  • Limit Apache 2 Memory Usage

    - by UltraNurd
    I am running a hobby webserver off of an ancient Blue & White G3/300 running Debian PPC Squeeze 2.6.30. The performance is okay for a while after a restart, but it eventually gets more and more bogged down. Right now it's at 76 days uptime, and the main culprit seems to be the memory usage of 10+ apache2 processes. I think I need to lower the values for StartServers, MinSpareServers, and/or MaxSpareServers, but I'm not sure which one to adjust, and there are three sections for each depending on which mpm module is in use. How do I tell which of the following sections I need to change, and what are some reasonable values given that the box has 448 MB physical memory (weird upgrade history of one each 64, 128, and 256 sticks)? <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> There aren't any other instances of StartServers in my apache2.conf, but none of those mpm modules appear in mods-available or mods-enabled. Ideas? Thanks!

    Read the article

  • Selenium server causes crazy load on server - how to prevent?

    - by Eric
    I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

    Read the article

  • Firefox Won't Save My Google Cookies Between Restarts

    - by Tom Purl
    I'm using firefox 11 on Ubuntu. For some strange reason, Firefox won't save my google cookies between browser restarts. I have to log in to gmail every time I restart my browser, even if I click on the check box that tells Google to remember me. The strange thing is that Firefox does actually store some gmail cookies when I log in. It's just that those cookies disappear after restarting Firefox. The especially strange thing is that this only seems to happen with *.google.com url's. I haven't noticed this problem with any other site that I use. Please note that I tried to see if this was a plugin-related problem. I therefore started Firefox in safe mode and turned off all plugins. I then logged into Gmail and told it to remember me. I then shut down Firefox and started it the same way in safe mode. I got the same bad results. Has anyone else ever seen anything like this before? Is there a reason that Firefox seems to be blacklisting Google cookies?

    Read the article

  • Windows 2003 DNS or IIS6 Problem?

    - by Mario
    Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

    Read the article

  • How can a CentOS 6 guest running in VirtualBox be configured as a LAMP server that can be accessed from the Windows host?

    - by jtt89
    I was able to conect Centos6 on Virtual Box to Windows (I can ping in both directions) with Host-only Adapter (for connection between the two) and NAT Adapter (to enable Linux on VB to connect to the Internet). I want to set up httpd, mysql and vsftpd servers and in the end easily connect to httpd from Windows based browser and ftp server with a Windows based client as well. I would also want to have access through SSH. I have a general idea of the steps that are involved, but there is also a configuration that I am not sure about at this point. Lets say I follow these steps: yum install httpd yum install php php-pear php-mysql yum install mysql-server mysql_secure_installation yum install vsftpd yum install mod_ssl Technically I have everything installed, but what would be the next steps that I need to take (from the networking point of view, so to speak) to get it all working)? I know I need to configure, at least Apache, and ftp server, but I am not sure how is it gonna work; like where am I gonna be uloading the sites (I know this can vary), how am I gonna know what address to use in a browser if I wanna go to a website x, y, z on that installation etc. This sounds like I need to do some kind of DNS setup and I am kind of stuck at this point. If somebody could give me a general outline of what are the things that need to be done that would be great (I was looking at a lot of websites and I know about etc/sysconfig/network, httpd.config - not too much about it on Apache's site, hostname, hostname -f etc; but it is kind of hard to piece it all together at this point). I am gonna be looking at the books also, but they not always reflect the setup that I have too (VirtualBox). Thank you.

    Read the article

  • Error opening hyperlinks in Excel 2003

    - by richardtallent
    When clicking to follow hyperlinks from Excel, I'm now getting this error: Unable to open http://blah... Cannot download the information you requested. The hyperlinks in the Excel file are created using the HYPERLINK() formula. I use Google Chrome as my default browser. The web site in question uses Basic Authentication, and I've entered correct credentials when prompted (the dialog looked like an IE auth box, not Chrome's, but it's always been that way, even when it was working properly). This hasn't been an issue until recently. I'm guessing our IT department made some lame change to IE's configuration that is causing Office to not be able to open the URLs, despite having Chrome as my browser. Things I've checked already: URLs are good, they work fine when pasted manually into Chrome, IE, or Firefox. IE is not set to Work Offline (already found that suggestion on Google). I checked Program Access and Defaults and verified that Chrome is selected. Nothing in the URL requires URLEncoding, so it's no goofy issue with encoding I've had reports from some other users now and then about the same problem, but this is the first time I've experienced it myself.

    Read the article

  • Centos IPTables configuration for external firewall

    - by user137974
    Current setup Centos which is a Web, Mail (Postfix,Dovecot), FTP Server and Gateway with public ip and private ip (for LAN Gateway). We are planning to implement external firewall box and bring the server to LAN Please guide on configuring IPTables... Unable to receive mail and outgoing mail stays in postfix queue and is sent after delaying... The local ip of the server is 192.168.1.220 iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP incoming HTTP iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 443 -m state --state ESTABLISHED -j ACCEPT outgoing HTTP iptables -A OUTPUT -o eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT FTP iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 21 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 1024:65535 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 1024:65535 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT SMTP iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 25 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 25 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 1024:65535 -d 0/0 --dport 25 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --sport 25 -d 192.168.1.220 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT POP3 iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d 192.168.1.220 --dport 110 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -s 192.168.1.220 --sport 110 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT

    Read the article

  • Windows Server (SBS) 2008 - Telephony service won't start (missing permissions)

    - by Uri
    I am running a SBS 2008 server. It's setup as the domain controller for the network. After a reboot, the Telephony service (and all services that depend on it) refuses to start under the Network Service account. The error given is: Error 1297: A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration. This has caused all the network services not to be accessible e.g. terminal services, VPN (RRAS), SQL Server instances. The SSH daemon I have running on the box will accept connections only from localhost, but won't respond on the network. After searching around, the only advice I could find was to grant the Network Service account these permissions: Adjust memory quotas for a process Replace a process level token I set those permissions on both the Default Domain Policy and the Default Domain Controller Policy, but it seemingly had no effect. Most of the services will start if I change them to run under the Local System account, but that didn't make them accessible on the network. I even tried removing the Routing and Remote Access Services feature, rebooting and reinstalling it, but the issue remains. Any ideas?

    Read the article

  • NRPE unable to read output, but why?

    - by ticktockhouse
    I have this problem with NRPE, all the stuff I've found so far on the net seems to point me at things I've already tried. # /usr/local/nagios/plugins/check_nrpe -H nrpeclient gives NRPE v2.12 as expected. Running the command by hand (as defined in nrpe.cfg on "nrpeclient", gives the expected response nrpe.cfg: command[check_openmanage]=/usr/lib/nagios/plugins/additional/check_openmanage -s -e -b ctrl_driver=0 bat_charge "Expected response" But if I try to run the command from the Nagios server I get the following: # /usr/local/nagios/plugins/check_nrpe -H comxps -c check_openmanage NRPE: Unable to read output Can anyone think of anywhere else I might have made a mistake with this? I've done the same thing on multiple other servers with no problem. The only difference I can think of with this is that this box is RHEL 5 based, whereas the others are RHEL 4 based. Those two bits above that I've tested are the what most people seem to suggest when people have had this problem. I should mention that I get a weird error in the logs when I restart nrpe: nrpe[14534]: Unable to open config file '/usr/local/nagios/etc/nrpe.cfg' for reading nrpe[14534]: Continuing with errors... nrpe[14535]: Starting up daemon nrpe[14535]: Warning: Daemon is configured to accept command arguments from clients! nrpe[14535]: Listening for connections on port 5666 nrpe[14535]: Allowing connections from: bodbck,combck,nam-bck Even though, it's plainly reading that /usr/local/nagios/etc/nrpe.cfg file to get the stuff it's talking about further down..

    Read the article

  • Routing multiple static IPs from ISP at the cable modem?

    - by Jakobud
    I'm taking over IT responsibilities for a previous IT guy. We have a 50mb cable modem connection from Comcast along with 5 static IP addresses: XXX.XXX.XXX.180 XXX.XXX.XXX.181 XXX.XXX.XXX.182 XXX.XXX.XXX.183 XXX.XXX.XXX.184 We are in the process of replacing our firewall machine. Currently the firewall box is the only thing connected to the cable modem. However the cable modem has multiple ethernet ports on it, similarly to a router. I have assembled a new firewall machine and its time to start testing and configuring it. So that means that I also need it plugged into the cable modem (remember it has multiple ethernet ports on it). So now with multiple computer plugged into the cable modem, how does the cable modem know where to route the traffic? If some request on the internet is made to XXX.XXX.XXX.181, which goes to our cable modem, how does the cable modem know which connected computer that traffic is supposed to be sent? Looking at the web interface for the cable modem, there doesn't seem to be anything special setup on it with regards to routing or NATing IP addresses. Is that because when there is only one computer connected to the modem, all traffic is sent to it by default? Now that I am going to (temporarily) have multiple computers plugged into the cable modem, do I need to specify routing or NAT rules on the modem itself? I am going to speak to Comcast about this next, but I figured I'd ask here first just so I can get a better grasp on how this type of thing generally plays out.

    Read the article

  • Setting up a PC for the Kids

    - by Martin Clarke
    I recently finished building a new PC from scratch; and then I decided to treat myself to a new widescreen monitor. I'm left with a bit of a conundrum with what to do with my old box. I'm considering a few options such as a file server, putting Linux on it, putting it elsewhere in the house or giving it to a member of the family and so on. But to be honest, I don't really think it would get much use. I've started thinking about putting together something for my kids. The oldest is coming up on 4 in a couple of months and he's used my PC and Macbook (supervised!) before for playing jigzaw puzzles, babysmash and so forth. He's also uses the computer at his nursery (Kindergarden for North Americans!). So, its got me thinking about setting something up for him (bonus for his brother who is 2). I was wondering what others had done when trying to put together something for their kids? Some points for consideration: Operating System? Software? Anti-virus Internet (probably blocking?) Hardware (I've seen some keyboards designed with kids in mind)

    Read the article

  • Public DNS redirect subdomain to Windows Server 2003 DNS

    - by user125248
    I'm a programmer by trade but often dabble in sysadmin tasks and responsibilities. I have recently been tasked with setting up a Windows Server 2003 networking environment for a small business with multiple branches. The business already has a domain name they use to host a website at www.example.com. Currently the DNS nameservers are at Zerigo and I would very much like it to remain that way (as they specialize in just providing DNS services and they do this very well). We also have a bunch of other subdomains we use to conviniently connect to the various branches that have static IPs assigned from ISPs, so we're able to connect easily to branch1.example.com. Is it possible to 'redirect' all intranet.example.com DNS requests to a Windows box? I've been doing a little reading and I see there are NS records that might be able to do this, and the Windows DNS server could then perform all of the lookups for that subdomain, say, server1.intranet.example.com or client5.intranet.example.com. This would seem better to me, than registering a new domain name for the organisation, as keeping a single domain name makes more organizational sense.

    Read the article

  • SNAT through Racoon IPSec VPN

    - by Mite fine d'ailes
    I am trying to route traffic from a device (that I will call "target") connected to my Ubuntu box (that I will call "host") to servers at a remote office. The host uses a Racoon IPSec VPN, connected through a NIC called efix. This creates an aliased IF called efix:0 which has IP adress 192.168.190.132. It is able to reach the servers. The link between host and target is an Ethernet link, using IP adresses 10.0.0.1 on IF eusb for the host and 10.0.0.2 on IF eth0 for the target. I have setup the following routes and iptables entries: On target: 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.0.1 0.0.0.0 UG 0 0 0 eth0 On host: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -j SNAT --to 192.168.190.132 iptables -A FORWARD -s 10.0.0.0/24 -j ACCEPT iptables -A FORWARD -d 10.0.0.0/24 -j ACCEPT Using Wireshark to monitor an HTTP GET, I can see SYN packets from the target go all the way to the server, but the server's SYNACK packets stop at the host and are not forwarded to the target. Am I missing something here ? Isn't SNAT supposed to keep track of the connections ?

    Read the article

  • Can't find standalone Chrome Gmail client that I know exists

    - by Carson
    I'm on Windows. A couple years ago when I switched from Outlook to Gmail (Google Apps), Google provided this awesome little standalone gmail client that was just a single-purpose Chrome install. It launched like a normal application, stayed updated when I updated Chrome. It was Chrome in a separate application that launched only gmail, stayed logged in really well, and "felt" like a gmail mail client, with the gmail interface. It had it's own little red envelope icon, it was a windows app. (I remember there was no Mac equivalent.) I found it while looking through the "this is how you get your company to switch to gmail" documentation that Google provided. I just repaved my box and now I'm looking for this thing again, and I had no idea it would be impossible to find. I've spent literally 2 hours looking, searching, googling, etc. I'm losing my mind. Anyone know how I can get my hands on this? I used it all day every day for 2 years, so I know it exists :), but I can not find it. Any assistance would be gratefully received.

    Read the article

  • pure-ftpd not listening on specified port

    - by Jason McLaren
    I installed the pure-ftpd package (version 1.0.35-1) on an Ubuntu 12.04 box (an EC2 instance based on the standard Ubuntu 12.04 AMI). The pure-ftpd daemon is running (verified with ps), though there is no PID file (expected one to be created by the /etc/init.d/pure-ftpd script). Here's the resulting command that gets run by the init.d script: /usr/sbin/pure-ftpd -l pam -O clf:/var/log/pure-ftpd/transfer.log -o -8 UTF-8 -u 1000 -E -B -g /var/run/pure-ftpd/pure-ftpd.pid Here's my real problem: the ftp server isn't actually listening on any port (checked with netstat and nmap). So I can't ftp to the server (either locally using localhost or remotely using the public IP address). I tried adding a Bind file to /etc/pure-ftpd/conf and restarting, but it didn't help. When I installed pure-ftpd, it replaced inetd with openbsd-inetd, but did not run it since there were no services enabled. So inetd is not listening on port 21 either. (Apparently Ubuntu has a no-inetd-by-default policy, according to https://lists.ubuntu.com/archives/ubuntu-users/2010-September/227905.html .) I want to run pure-ftpd by itself (not with inetd) anyways, since the /etc/init.d/pure-ftpd script requires no inetd if you use the UploadScript feature. I'm not familiar with how Ubuntu handles network services (and can't find any relevant docs besides generic man pages), so I'm probably missing something obvious. Nothing seems out of the ordinary with /etc/hosts.allow (empty) or hosts.deny (empty), and I didn't add any firewall rules (iptables -L shows that the firewall is in its initial state). I've checked the pure-ftpd docs; not sure what else to look at. Any help would be appreciated, thanks!

    Read the article

  • How do I install the pdo_mysql driver on Red Hat Enterprise Linux 6.1?

    - by Will Martin
    I have a RHEL box running PHP 5.3.3, which was installed using the binary packages provided by yum. I have installed the php-pdo package: # yum info php-pdo Loaded plugins: product-id, rhnplugin, subscription-manager Updating Red Hat repositories. Installed Packages Name : php-pdo Arch : x86_64 Version : 5.3.3 Release : 3.el6_1.3 Size : 168 k Repo : installed From repo : rhel-x86_64-server-6 Summary : A database access abstraction module for PHP applications URL : http://www.php.net/ License : PHP Description : The php-pdo package contains a dynamic shared object that will add : a database access abstraction layer to PHP. This module provides : a common interface for accessing MySQL, PostgreSQL or other : databases. It appears to be working correctly for SQLite databases, but not MySQL. There's no file including pdo_mysql.so in /etc/php.d, and there is no copy of pdo_mysql.so in /usr/lib64/php/modules. I'm pretty sure I just need the driver file and a line in the PHP configuration. A yum search pdo mysql didn't turn up any useful packages, and Google has failed me. If I were on Ubuntu or Debian, I'd apt-get install php5-mysql and be done with it. So ... where in Red Hat land do I get a copy of pdo_mysql.so, and install it properly?

    Read the article

  • Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

    - by dash-tom-bang
    Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

    Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >