Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 497/869 | < Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >

• squid running out of sockets

  - by drscroogemcduck

  I have a setup where squid sits in front of a java server and acts as a reverse proxy. Recently i've load tested the site and if i fire 100 threads at it each making a request using jmeter i start getting errors in my load test tool like 'no route to host' even though the load test tool and the server are on the same machine. if i run the following command where port 82 is the port my squid server is running on: netstat -ann | grep 82 | wc -l i get 22000 or something and most of them are in TIMED_WAIT. i'm thinking that maybe the huge number of sockets in the TIMED_WAIT state are starving the box of resources.

  Read the article

• SBS 2003 R2 install errors

  - by piagetblix

  I just installed sbs2003 R2 as a learning lab box on my home network. The install seemed to take quit a while with a bit of shuffling between disks 4 and 5. The continue setup checklist showed the red x besides the exchange install and finally gave me an error about the "schema needing extending run, forest /adprep" and told me at the end that the install did not succeed. After a longer than normal reboot it comes up and seems to be OK. What logs do i need to check to see what went wrong? Should i reinstall and try burning the iso's to new media? cheers

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS.

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• Any ideas for automatic initial/scripted configuration of a NetApp?

  - by maddenca

  The background is to make a solution where we can automate as much as possible the building up of ‘pods’ that include server/network/storage and that will be built at remote sites. In an ideal world would be that we create a single management server which is preconfigured with DHCP/TFTP/or whatever. This management server is racked with a CISCO UCS, FAS31x0, etc. at a build site and is then transported to the final customer site where on power it almost configures itself, or at least bootstraps itself far enough that a remote skilled 'expert' can complete the setup of the pod. Ideas (doesn't have to resemble 100% of the above) would be helpful.

  Read the article

• Internal+external interfaces with multiple default gateways on win2003

  - by fileitup

  Im trying to set up several web servers for a load balanced cluster and need to have each server connected to the internal network (for load balancing) as well as to an external network (internet - for administration). I have two NICs but since I cant set two default gateways I have the external gateway as default and the internal as a route rule. This setup only works half way - the internal network is fine but I cant log in from outside or see the web from the box. If I switch the gateways remote login/web will work, but the internal wont. Im sure someone encountered this before but wasnt able to find anything online. Any help will be appreciated.

  Read the article

• BIOS password and hardware clock problems

  - by Slartibartfast

  I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

  Read the article

• Game Review: God of Light

  Luckily I came across this title at a very early stage. If I remember correctly, I took notice of God of Light on Twitter right on the weekend it has been published on the Play Store. "Sit back and become immersed into the world of God of Light, the game that rethinks the physics puzzle genre with its unique environment exploration gameplay, amazing graphics and exclusive soundtrack created by electronic music icon UNKLE. Join cute game mascot, Shiny, on his way to saving the universe from the impending darkness. Play through a variety of exciting game worlds and dozens of levels with mind-blowing puzzles. Your goal is to explore game levels, seek for game objects that reflect, split, combine, paint, bend and teleport rays of light energy to activate the Sources of Life and bring light back to the universe." Mastering the various reflection items in God of Light is very easy to learn and new elements are introduced during the game. Amazing puzzle game Here's the initial review I posted on the Play Store: "Great change in puzzles Fantastic and refreshing concept of puzzle solving. The effects and the music match very well, putting the player in the right mood to game. Get enlightened and grow your skills until you are a true God of Light." And it remains true, even after completing the first realm completely. Similar to Quell it took me only a couple of hours during the evening to complete all levels in the available three realms, unfortunately. God of Light currently consists of 75 levels, well it's 25 in each realm to be precise, and the challenges are increasing. Compared to the iOS version from the AppStore, God of Light is available for free on Android - at least the first realm (25 levels). Unlocking the other two remaining realms is done through an in-app purchase. The visual appearance, the sound effects and the background music provided by UNKLE makes God of Light a superb package for any puzzle gamer. Whether it is simply reflecting light over multiple mirrors, or later on bending the rays of light with black holes, or using prisms to either split, enforce, or colourise your beam, God of Light is great fun and offers a good amount of joy. Check out the following screenshots for some impressions. God of Light: Astonishing graphics and visual appeal throughout the game God of Light - Introduction to the game during the first levels. New light items are introduced at each stage during the game play God of Light: Increasing complexity and puzzle fun Hopefully, Playmous is going to provide more astonishing looking realms and interesting gimmicks in future versions. Play Store: God of Light Also, check out the latest game updates on the official web site of Playmous

  Read the article

• Optimising bare-metal hypervisor installation

  - by Stephen

  what is the best way to install a bare metal hypervisor (i.e. to host multiple VM's)? I spoke to a friend and he is using a HP server to host all his VMs with VMware ESXi, but he installed the VMWARE esxi software on a flash card. He can then use his full hard disk capacity from each drive for the VMs. Is this a pretty standard setup when configuring a bare-metal hypervisor? How do you guys do it, and what is best?

  Read the article

• DNS record question

  - by Just plain me

  So I have two Windows domains/seperate forests. One forest consist of what is left of the bought-out company's domain. They have 5 servers that still have important data and need to be worked with on a daily basis by a large group of employees. We have a forest level trust setup to ease file access. We manually create DNS A records for the 5 servers so their short names would resolve to the IP addresses. I need the FQDN to resolve though. Should I create CName records to achieve this? I hope this question makes sense, I am learning DNS on the fly... :)

  Read the article

• Unable to mount smb share. "Please select another viewer and try again". Please help. Serious smb/nautilus foo needed

  - by oznah

  This don't think this is the typical, "I can't mount a windows share" post. I am using stock Ubuntu 12.04. I am pretty sure this is a Nautilus issue, but I have reached a dead end. I have one share that I can't mount using smb://server/share via nautilus. I get the following error. Error: Failed to mount Windows share Please select another viewer and try again I can mount this share from other machines(non-ubuntu) using the same credentials so I know I have perms on the destination share. I can mount other shares on other servers from my Ubuntu box so I am pretty sure I have all the smb packages I need on my Ubuntu box. To make thing more interesting, if I use smbclient from the command line, I mount this share with no problems from my Ubuntu box. So here's what we know: destination share perms are ok (no problem accessing from other machines) smb is setup correctly on Ubuntu box (access other windows shares no problem) I only get the error when using nautilus smbclient in terminal works, no problem Any help would be greatly appreciated. Googling turned up simple mount/perms issues, and I don't think that is what is going on here. Let me know if you need more information. Hugh

  Read the article

• CentOS 6.5 SVN https - Unknown DAV provider: svn

  - by Programster

  I am trying to setup a CentOS 6.5 64bit server with SVN over HTTPS. Unfortunately after configuring the /etc/httpd/conf.d/subversion.conf file as follows (changed paths): <Location /repos> DAV svn SVNParentPath /path/to/svn/repos # Limit write permission to list of valid users <LimitExcept GET PROPFIND OPTIONS REPORT> # Require SSL connection for password protection SSLRequireSSL AuthType Basic AuthName "Authorization Realm" AuthUserFile /path/to/passwdfile Require valid-user </LimitExcept> </Location> I get the following error message when restarting http: Starting httpd: Syntax error on line 3 of /etc/httpd/conf.d/subversion.conf: Unknown DAV provider: svn I have triple checked that I have the mod_dav_svn package already installed: Package mod_dav_svn-1.6.11-10.el6_5.x86_64 already installed and latest version Is my config wrong or are there other packages I need to set up?

  Read the article

• Mails bounce because of invalid character ('@') in username

  - by user1598585

  I have a working exim setup with virtual users, working alright, except for when I try to send email to certain servers. These servers reject my emails because of #5.1.3 Invalid character ('@') in username. The offending header parts seem to be: Return-path: <"[email protected]"@smtp.example.com> and ...(envelope-from <"[email protected]"@smtp.example.com>)... The problem is that I cannot find where and why the usernames are being generated like this. My router for submission is: dnslookup: driver = dnslookup domains = ! +local_domains transport = remote_smtp ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 no_more And the respective transport: remote_smtp: driver = smtp What can be producing this problem?

  Read the article

• Good Shibboleth tutorials our there?

  - by fgysin

  I am looking into using Shibboleth for authentication of webapplications at my organisation. I am very new to this subject and would like to read through some good tutorials, hands-on-lessons or whatever is out there to help newbies getting to know Shibboleth. But so far I have not been able to find any tutorials that contain specific examples for each steps. I would like to get a running setup up somehow so I will be able to play around with it... What I have found up to now: Official Documentation for Shibboleth 2 -- https://spaces.internet2.edu/display/SHIB2/Installation I would appreciate any hints you can give me about additional information to Shibboleth.

  Read the article

• A question about the cobbler-ubuntu-import bash script

  - by user183394

  I have been testing the latest cobbler for PXE booting Ubuntu 12.04.1-server-x86_64 and 12.10-server-x86_64 using a Scentific Linux 6.3 host to run the cobbler server. With the former, I got everything going. But with the later, I haven't been successful. As an attempt to figure things out, I downloaded Ubuntu's cobbler 2.2.2 source package. Examining the content, I soon noticed that Ubuntu's cobbler 2.2.2 came with a cobbler-ubuntu-import bash script. I reviewed the code and spotted something interesting: line 9 of the script states: 9 AUTO_KOPTS='log_host=@@server@@ log_port=514 priority=critical locale=en_US netcfg/choose_interface=auto' But after extensive googling, reading both Debian and Ubuntu's documentation about the debian-installer, I don't see these two kopts log_host and log_port documented anywhere. Putting it in the profile of my current test setup, even my cobbler server host does run rsyslogd, I don't see anything logged either. No, I don't have iptables and selinux on on the cobbler server host. Can anyone point to me where I can read more about these two options? Having the ability to log an installation to a remote central logging host would be really cool.

  Read the article

• Error message during update from 13.04 to 13.10

  - by layonhands

  The following was reported after I attempted to report the problem back to Ubuntu: The problem cannot be reported: You have some obsolete package versions installed. Please upgrade the following packages and check if the problem still occurs: ubuntu-release-upgrader-gtk, apport, apport-gtk, apport-symptoms, apt, apt-utils, at-spi2-core, binutils, dbus, gcc-4.7-base, gdb, gir1.2-atk-1.0, gir1.2-gtk-3.0, glib-networking, glib-networking-common, glib-networking-services, gnupg, gpgv, ifupdown, initramfs-tools, initramfs-tools-bin, kmod, libappindicator3-1, libapt-inst1.5, libapt-pkg4.12, libasound2, libatk-bridge2.0-0, libatk1.0-0, libatk1.0-data, libatspi2.0-0, libc-bin, libc6, libcups2, libdbus-1-3, libdbusmenu-glib4, libdbusmenu-gtk3-4, libdrm-intel1, libdrm-nouveau2, libdrm-radeon1, libdrm2, libgail-3-0, libgcc1, libgcrypt11, libglib2.0-0, libglib2.0-data, libgnutls26, libgomp1, libgstreamer-plugins-base1.0-0, libgstreamer1.0-0, libgtk-3-0, libgtk-3-bin, libgtk-3-common, libgudev-1.0-0, libicu48, libindicator3-7, libkmod2, liblcms2-2, libpci3, libplymouth2, libpolkit-agent-1-0, libpolkit-backend-1-0, libpolkit-gobject-1-0, libprocps0, libpython-stdlib, libpython2.7, libpython2.7-minimal, libpython2.7-stdlib, libpython3-stdlib, libpython3.3-minimal, libpython3.3-stdlib, libssl1.0.0, libstdc++6, libtiff5, libudev1, libx11-6, libx11-data, libx11-xcb1, libxcb-dri2-0, libxcb-glx0, libxcb-render0, libxcb-shm0, libxcb1, libxcursor1, libxext6, libxfixes3, libxi6, libxinerama1, libxml2, libxrandr2, libxrender1, libxres1, libxt6, libxtst6, libxxf86vm1, lsb-base, lsb-release, module-init-tools, multiarch-support, openssl, passwd, pciutils, perl, perl-base, perl-modules, plymouth, plymouth-theme-ubuntu-text, policykit-1, procps, python, python-gi, python-minimal, python2.7, python2.7-minimal, python3, python3-apport, python3-distupgrade, python3-gi, python3-minimal, python3-problem-report, python3-software-properties, python3-update-manager, python3.3, python3.3-minimal, rsyslog, shared-mime-info, software-properties-common, software-properties-gtk, tar, tzdata, ubuntu-release-upgrader-core, ubuntu-release-upgrader-gtk, udev, update-manager, update-manager-core, update-notifier, update-notifier-common If this question has already been answered, I'm sorry for the repost, but I would appreciate a link to the fix. Thanks. FYI: Dell Latitude D630, Intel Centrino processor. Also, the updater is currently running what seems to be the update. I will report back when it is done going through its process to let you know if it is in fact the 13.10 update. Update 2: System went through an update, but it wasn't for the OS. I think it was an update for the error message mentioned above. Now the OS update is currently running the 'distribution upgrade' portion of the update. This is further than it had gone before. Again I will report back once this is done to let you know whether or not the update was successful. Final Update: Don't know for sure what happened, but I'm almost sure that the error mentioned above was resolved in the first update prior to the 13.10 update. All set.

  Read the article

• Export-Mailbox - "an unknown error has occurred"

  - by grojo

  I am trying to move messages from a rather large mailbox to an archive mailbox. However I run into errors all the time. the command I am executing is Export-Mailbox -Identity MAILBOX_FROM -TargetMailbox ARCHIVE -TargetFolder ARCHIVE_FOLDER -StartDate 2009-02-01 -EndDate 2009-02-28 -DeleteContent -Confirm:$false I can copy/move some messages, but run into frequent "an unknown error has occurred" (statuscode -1056749164) I run the console as administrative user, and all permissions are set right, as far as I can tell. I've restricted the start and end dates in case the number of messages moved/deleted should create problems. Anything I am missing in my setup? Corrupted messages? Over-limit message sizes?

  Read the article

• Implementing a form of port knocking + Phone Factor = 2 Factor auth for RDP?

  - by jshin47

  I have been looking into how to secure a publicly-available RDP endpoint and want to implement our two-factor authentication RADIUS server, PhoneFactor. I would like to implement the following process: User opens up web app in browser In web app, user enters username + password, initiates RADIUS auth Phone factor calls user to complete auth Once user is authenticated, port 3389 is opened on user's IP on pfSense firewall. After some amount of time, firewall rule is removed for that IP I would like to know the following: Is this a typical setup? If it is a bad idea, please explain why. If it is possible, are there any packages that assist with this? Specifically, the third step, where the appropriate firewall rule would need to be added... Edit: I am aware of TS Web Gateway, but I want the users to be able to use the traditional RDP client...

  Read the article

• Tiling window manager where dual heads share common workspace

  - by mikero

  I want to use a tiling window manager with my dual monitor setup, but almost all wms seem to treat each monitor as an independent workspace. This means that I can change the workspace of monitor 0 without affecting the workspace of monitor 1. This is not what I want -- I want a workspace to span both monitors, where each monitor is essentially a separate column for tiling (my monitors are oriented vertically, so they are well-suited as tiling columns). When I switch workspaces, say with Mod-[0-9], I want both monitors to change contents. So far the only wm I have found to support this is wmii, but I'd love to try some other options. Have I missed this capability from other tiling wms?

  Read the article

• Cygwin/Git Bizarre Terminal Issue

  - by emptyset

  Alright, this is weird. First off, this is mintty running on up-to-date cygwin, with git pulled from cygwin's setup.exe. I am running zsh. $ git clone https://<user>@<domain>/<repository>/ ~/src/project/dev Initialized empty Git repository in /cygdrive/c/src/project/dev/.git/ Password: <actual password in plain text appears> # Nothing happens... ^C $ <password text that I just typed> zsh: command not found: <same password text> What is going on here? Is this a terminal problem, a shell problem, a git problem, or a cygwin problem? Update: Yes, I'm running the Cygwin git version, not the Windows version: $ which git /usr/bin/git $ git --version git version 1.7.1 $ /cygdrive/c/Program\ Files\ \(x86\)/Git/bin/git.exe --version git version 1.7.0.2.msysgit.0

  Read the article

• Allow JMX connection on JVM 1.6.x

  - by Martin Müller

  While trying to monitor a JVM on a remote system using visualvm the activation of JMX gave me some challenges. Dr Google and my employers documentation quickly revealed some -D opts needed for JMX, but strangely it only worked for a Solaris 10 system (my setup: MacOS laptop monitoring SPARC Solaris based JVMs) On S11 with the same opts I saw that "my" JVM listening on port 3000 (which I chose for JMX), but visualvm was not able to get a connection. Finally I found out that at least my S11 installation needed an explicit setting of the RMI host name. This what finally worked:         -Dcom.sun.management.jmxremote=true \        -Dcom.sun.management.jmxremote.ssl=false \        -Dcom.sun.management.jmxremote.authenticate=false \        -Dcom.sun.management.jmxremote.port=3000 \        -Djava.rmi.server.hostname=s11name.us.oracle.com \ Maybe this post saves someone else the time I spent on research 

  Read the article

• CVSNT to CVSNT Migrations

  - by BParker

  Has anybody re-homed a CVSNT installation? I need to take a CVSNT setup on one ageing server and relocate it to a new shiny server, but i don't have a great deal of experience with this software. Does anyone know the basic process for moving an entire repository to a new server? We have 3 base repositories, totaling about 6GB. Size wise it's not too big, but i need to make sure all the history is migrated correctly. I've googled around a bit, but not managed to find any info on this kind of move, everyone seems to prefer to write how-to's on moving to Subversion et al.... The CVSNT server is running on windows if that makes a great deal of difference....

  Read the article

• How can I diagnose a "502 Bad Gateway" response from an Apache/Tomcat configuration?

  - by Structure

  I just finished up configuring a fairly default configuration of Tomcat. My Apache configuration was pre-existing and post-tomcat it still has no issues. I am using mod_jk to (if I am saying this correctly) interface between Apache and Tomcat and have my conf files setup for my workers, etc. I put my test file (Simply: http://tomcat.apache.org/tomcat-4.1-doc/appdev/sample/web/hello.jsp) into my tomcat/webapps/ directory and then call it via http://localhost/test/hello.jsp. From here Apache returns a "502 Bad Gateway" response. I confirmed this via the Apache logs, but beyond that I have no idea how to diagnose the issue. I assume the 502 is because Tomcat did not respond. I'd like to confirm if Tomcat received the request, but cannot locate the log file. At this point I had thought my installation was complete, so not sure where to go from here. Any input would be appreciated.

  Read the article

• NFS server generating "invalid extent" on EXT4 system disk?

  - by Stephen Winnall

  I have a server running Xen 4.1 with Oneiric in the dom0 and each of the 4 domUs. The system disks of the domUs are LVM2 volumes built on top of an mdadm RAID1. All the domU system disks are EXT4 and are created using snapshots of the same original template. 3 of them run perfectly, but one (called s-ub-02) keeps on being remounted read-only. A subsequent e2fsck results in a single "invalid extent" diagnosis: e2fsck 1.41.14 (22-Dec-2010) /dev/domu/s-ub-02-root contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Inode 525418 has an invalid extent (logical block 8959, invalid physical block 0, len 0) Clear<y>? yes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/domu/s-ub-02-root: 77757/655360 files (0.3% non-contiguous), 360592/2621440 blocks The console shows typically the following errors for the system disk (xvda2): [101980.903416] EXT4-fs error (device xvda2): ext4_ext_find_extent:732: inode #525418: comm apt-get: bad header/extent: invalid extent entries - magic f30a, entries 12, max 340(340), depth 0(0) [101980.903473] EXT4-fs (xvda2): Remounting filesystem read-only I have created new versions of the system disk. The same thing always happens. This, and the fact that the disk is ultimately on a RAID1, leads me to preclude a hardware disk error. The only obvious distinguishing feature of this domU is the presence of nfs-kernel-server, so I suspect that. Its exports file looks like this: /exports/users 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/media/music 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/media/pictures 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/opt 192.168.0.0/255.255.248.0(rw,sync,no_subtree_check) /exports/users and /exports/opt are LVM2 volumes from the same volume group as the system disk. /exports/media is an EXT2 volume. (There is an issue where clients see /exports/media/pictures as being a read-only volume, which I mention for completeness.) With the exception of the read-only problem, the NFS server appears to work correctly under light load for several hours before the "invalid extent" problem occurs. There are no helpful entries in /var/log. All of a sudden, no more files are written, so you can see when the disk was remounted read-only, but there is no indication of what the cause might be. Can anyone help me with this problem? Steve

  Read the article

• Send as another user / email address in Exchange 2010

  - by adamo

  In my setup there exist user1, ..., [email protected]. Mail for example.com is handled by Exchange 2010 and all the users user Outlook 2010. There also exists a Standard Distribution list named [email protected]. Is it possible to have some of the users being able to send email with [email protected] as the sender address? Can the sender's GECOS be different too when this happens so that the recipient sees "Offices of Example.com" instead of "User Name X"? Sometimes the secretaries need to send stuff as "the office" and not as theirselves ...

  Read the article

• Setting up a router as a DNS server only

  - by Jacob R

  I have a Linksys WRT54GL router that I don't need anymore, since I had to buy a 3G capable router (Dovado 3GN). As I only have a 3G connection at home, I want to optimize it as much as possible. I want to setup a caching DNS server, including some blacklisting of ad domains. The router currently runs the DD-WRT firmware. Is it possible to use this router as an ordinary computer, running only a DNS server, disabling all other features such as DHCP, WLAN, etc? Connecting it to my other router, should I simply run a cable into the WAN-port of the Linksys router?

  Read the article

< Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504  | Next Page >