Search Results

Search found 134 results on 6 pages for 'bounded'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• BAM Data Control in multiple ADF Faces Components

  - by [email protected]

  As we know Oracle BAM data control instance sharing is not supported.When two or more ADF Faces components must display the same data, and are bound to the same Oracle BAM data control definition, we have to make sure that we wrap each ADF Faces component in an ADF task flow, and set the Data Control Scope to isolated. This blog will show a small sample to demonstrate this. In this sample we will create a Pie and Bar using same BAM DC, such that both components use same Data control but have isolated scope.This sample can be downloaded  fromSample1.zip Set-up: Create a BAM data control using employees DO (sample) Steps: Right click on View Controller project and select "New->ADF Task Flow" Check "Create Bounded Task Flow" and give some meaningful name (ex:EmpPieTF.xml ) to the TaskFlow(TF) and click on "OK"CreateTF.bmpFrom the "Components Palette", drag and drop "View" into the task flow diagram. Give a meaningful name to the view. Double Click and Click "Ok" for  "Create New JSF Page Fragment" From "Data Controls" drag and drop "Employees->Query"  into this jsff page as "Graph->Pie" (Pie: Sales_Number and Slices: Salesperson) Repeat step 1 through 4 for another Task Flow (ex: EmpBarTF). From "Data Controls" drag and drop "Employees->Query"  into this jsff page as "Graph->Bar" (Bars :Sales_Number and X-axis : Salesperson). Open the Taskflow created in step 2. In the Structure Pane, right click on "Task Flow Definition -EmpPieTF" Click "Insert inside Task Flow Definition - EmpPieTF -> ADF Task Flow -> Data Control Scope". Click "OK"TFDCScope.bmpFor the "Data Control Scope", In the Property Inspector ->General section, change data control scope from Shared to Isolated. Repeat step 8 through 11 for the 2nd Task flow created. Now create a new jspx page example: Main.jspxDrag and drop both the Task flows (ex: "EmpPieTF" and "EmpBarTF") as regions. Surround with panel components as needed.Run the page Main.jspxMainPage.bmpNow when the page runs although both components are created using same Data control the bindings are not shared and each component will have a separate instance of the data control.

  Read the article

• Extending the ADF Controller exception handler

  - by frank.nimphius

  The Oracle ADF controller provides a declarative option for developers to define a view activity, method activity or router activity to handle exceptions in bounded or unbounded task flows. Exception handling however is for exceptions only and not handling all types of Throwable. Furthermore, exceptions that occur during the JSF RENDER RESPONSE phase are not looked at either as it is considered too late in the cycle. For developers to try themselves to handle unhandled exceptions in ADF Controller, it is possible to extend the default exception handling, while still leveraging the declarative configuration. To add your own exception handler: · Create a Java class that extends ExceptionHandler · Create a textfile with the name “oracle.adf.view.rich.context.Exceptionhandler” (without the quotes) and store it in .adf\META-INF\services (you need to create the “services” folder) · In the file, add the absolute name of your custom exception handler class (package name and class name without the “.class” extension) For any exception you don't handle in your custom exception handler, just re-throw it for the default handler to give it a try … import oracle.adf.view.rich.context.ExceptionHandler; public class MyCustomExceptionHandler extends ExceptionHandler { public MyCustomExceptionHandler() {      super(); } public void handleException(FacesContext facesContext,                              Throwable throwable, PhaseId phaseId)                              throws Throwable {    String error_message;    error_message = throwable.getMessage();    //check error message and handle it if you can    if( … ){          //handle exception        …    }    else{       //delegate to the default ADFc exception handler        throw throwable;}    } } Note however, that it is recommended to first try and handle exceptions with the ADF Controller default exception handling mechanism. In the past, I've seen attempts on OTN to handle regular application use cases with custom exception handlers for where there was no need to override the exception handler. So don't go for this solution to quickly and always think of alternative solutions. Sometimes a try-catch-final block does it better than sophisticated web exception handling.

  Read the article

• Harnessing Business Events for Predictive Decision Making - part 1 / 3

  - by Sanjeev Sharma

  Businesses have long relied on data mining to elicit patterns and forecast future demand and supply trends. Improvements in computing hardware, specifically storage and compute capacity, have significantly enhanced the ability to store and analyze mountains of data in ever shrinking time-frames. Nevertheless, the reality is that data growth is outpacing storage capacity by a factor of two and computing power is still very much bounded by Moore's Law, doubling only every 18 months.Faced with this data explosion, businesses are exploring means to develop human brain-like capabilities in their decision systems (including BI and Analytics) to make sense of the data storm, in other words business events, in real-time and respond pro-actively rather than re-actively. It is more like having a little bit of the right information just a little bit before hand than having all of the right information after the fact. To appreciate this thought better let's first understand the workings of the human brain.Neuroscience research has revealed that the human brain is predictive in nature and that talent is nothing more than exceptional predictive ability. The cerebral-cortex, part of the human brain responsible for cognition, thought, language etc., comprises of five layers. The lowest layer in the hierarchy is responsible for sensory perception i.e. discrete, detail-oriented tasks whereas each of the above layers increasingly focused on assembling higher-order conceptual models. Information flows both up and down the layered memory hierarchy. This allows the conceptual mental-models to be refined over-time through experience and repetition. Secondly, and more importantly, the top-layers are able to prime the lower layers to anticipate certain events based on the existing mental-models thereby giving the brain a predictive ability. In a way the human brain develops a "memory of the future", some sort of an anticipatory thinking which let's it predict based on occurrence of events in real-time. A higher order of predictive ability stems from being able to recognize the lack of certain events. For instance, it is one thing to recognize the beats in a music track and another to detect beats that were missed, which involves a higher order predictive ability.Existing decision systems analyze historical data to identify patterns and use statistical forecasting techniques to drive planning. They are similar to the human-brain in that they employ business rules very much like mental-models to chunk and classify information. However unlike the human brain existing decision systems are unable to evolve these rules automatically (AI still best suited for highly specific tasks) and  predict the future based on real-time business events. Mistake me not,  existing decision systems remain vital to driving long-term and broader business planning. For instance, a telco will still rely on BI and Analytics software to plan promotions and optimize inventory but tap into business events enabled predictive insight to identify specifically which customers are likely to churn and engage with them pro-actively. In the next post, i will depict the technology components that enable businesses to harness real-time events and drive predictive decision making.

  Read the article

• Assessing Relative Maintainability

  - by João Bragança

  We (a contractor, actually) are implementing an off the shelf system to replace a legacy homegrown system for the core domain of the company (designing widgets). Unfortunately both systems will have to run concurrently for some time, as the product just isn't ready yet. Also, the decision was made to only migrate some of the widgets from the legacy system, based on date of last sale activity. Later on a new requirement came down: certain people in the company, most of them outside of the widget development context, want to search all widgets. The search results screen has 3 pieces of data: a GUID, a human readable id that is searchable, and a brief description (may need to be searchable in the future). In the widget details, there will be multiple screens. These screens align very well along SOA / bounded context lines - a screen for marketing data, a screen for sales history, etc. UML ahead! I am probably using the wrong kind of arrows here so please forgive me. The current solution - which is not in production yet - is something like the following: Both systems will be queried and the controller will merge the results. The new system has its own proprietary query language (we've alleviated this a bit with a LINQ provider). It also puts a lot of data on the wire. 15 search results typically run about 60k of unintelligible SOAP-wrapped xml. So I would prefer to avoid querying this system directly. These two systems publish events to help us integrate with other systems, mainly an ERP system. One of these events contains all the data necessary for the search screen. I proposed the following alternative: However I am being told that 'adding another database' will create more maintenance down the road. However, I believe this to be false, as I had to add a relatively simple feature that took several hours longer than anticipated because of this merging code. I want to get a feel for which system is more maintainable in the long run. I personally have not had the burden of maintaining any large system. I want something more than my gut. Specifically I'd like to know if having more, specialized physical databases is more or less maintainable than having less larger physical databases.

  Read the article

• Is there a way to force spam-filter to change their policy or remove them as recognized spam service?

  - by Alvin Caseria

  As per mxtoolbox I got 1 blacklist still active for quite sometime now. UCEPROTECTL1's is running on 7 day policy since last spam mail. This is too strict compared to the 98 other spam filters out there as per mxtoolbox. (Or at least to the other 4 that detected the problem) I have no problem with our e-mail since it is hosted locally. But our domain is hosted outside the country and it run on a different IP. I contacted them but since it is the spam-filter's rule, there's nothing to be done but wait. I do believe services like spam-filters should at lease be bounded by guidelines and standards for this matter. Otherwise problem on delivering valid (after the fix) e-mails will be disastrous. Is there a way to force UCEPROTECT to change their policy or remove them as recognized spam service? Apart from contacting them in case they do not answer. Currently they are charging for fast removal if you pay by PayPal. I'm still looking for guideline/standard on how they should operate regarding this matter. Appreciate the help.

  Read the article

• RabbitMQ message consumers stop consuming messages

  - by Bruno Thomas

  Hi server fault, Our team is in a spike sprint to choose between ActiveMQ or RabbitMQ. We made 2 little producer/consumer spikes sending an object message with an array of 16 strings, a timestamp, and 2 integers. The spikes are ok on our devs machines (messages are well consumed). Then came the benchs. We first noticed that somtimes, on our machines, when we were sending a lot of messages the consumer was sometimes hanging. It was there, but the messsages were accumulating in the queue. When we went on the bench plateform : cluster of 2 rabbitmq machines 4 cores/3.2Ghz, 4Gb RAM, load balanced by a VIP one to 6 consumers running on the rabbitmq machines, saving the messages in a mysql DB (same type of machine for the DB) 12 producers running on 12 AS machines (tomcat), attacked with jmeter running on another machine. The load is about 600 to 700 http request per second, on the servlets that produces the same load of RabbitMQ messages. We noticed that sometimes, consumers hang (well, they are not blocked, but they dont consume messages anymore). We can see that because each consumer save around 100 msg/sec in database, so when one is stopping consumming, the overall messages saved per seconds in DB fall down with the same ratio (if let say 3 consumers stop, we fall around 600 msg/sec to 300 msg/sec). During that time, the producers are ok, and still produce at the jmeter rate (around 600 msg/sec). The messages are in the queues and taken by the consumers still "alive". We load all the servlets with the producers first, then launch all the consumers one by one, checking if the connexions are ok, then run jmeter. We are sending messages to one direct exchange. All consumers are listening to one persistent queue bounded to the exchange. That point is major for our choice. Have you seen this with rabbitmq, do you have an idea of what is going on ? Thank you for your answers.

  Read the article

• passing timezone from client (GWT) to server (Joda Time)

  - by Caffeine Coma

  I'm using GWT on the client (browser) and Joda Time on the server. I'd like to perform some DB lookups bounded by the day (i.e. 00:00:00 until 23:59:59) that a request comes in, with the time boundaries based on the user's (i.e. browser) timezone. So I have the GWT code do a new java.util.Date() to get the time of the request, and send that to the server. Then I use Joda Time like so: new DateTime(clientDate).toDateMidnight().toDateTime() The trouble of course is that toDateMidnight(), in the absence of a specified TimeZone, will use the system's (i.e. the server's) TimeZone. I've been trying to find a simple way to pass the TimeZone from the browser to the server without much luck. In GWT I can get the GMT offset with: DateTimeFormat.getFormat("Z").fmt(new Date()) which results in something like "-0400". But Joda Time's DateTimeZone.forID() wants strings formatted like "America/New_York", or an integer argument of hours and minutes. Of course I can parse "-0400" into -4 hours and 0 minutes, but I'm wondering if there is not a more straightforward way of doing this.

  Read the article

• Using ThreadPool.QueueUserWorkItem in ASP.NET in a high traffic scenario

  - by Michael Hart

  I've always been under the impression that using the ThreadPool for (let's say non-critical) short-lived background tasks was considered best practice, even in ASP.NET, but then I came across this article that seems to suggest otherwise - the argument being that you should leave the ThreadPool to deal with ASP.NET related requests. So here's how I've been doing small asynchronous tasks so far: ThreadPool.QueueUserWorkItem(s => PostLog(logEvent)) And the article is suggesting instead to create a thread explicitly, similar to: new Thread(() => PostLog(logEvent)){ IsBackground = true }.Start() The first method has the advantage of being managed and bounded, but there's the potential (if the article is correct) that the background tasks are then vying for threads with ASP.NET request-handlers. The second method frees up the ThreadPool, but at the cost of being unbounded and thus potentially using up too many resources. So my question is, is the advice in the article correct? If your site was getting so much traffic that your ThreadPool was getting full, then is it better to go out-of-band, or would a full ThreadPool imply that you're getting to the limit of your resources anyway, in which case you shouldn't be trying to start your own threads? Clarification: I'm just asking in the scope of small non-critical asynchronous tasks (eg, remote logging), not expensive work items that would require a separate process (in these cases I agree you'll need a more robust solution).

  Read the article

• method for specialized pathfinding?

  - by rlbond

  I am working on a roguelike in my (very little) free time. Each level will basically be a few rectangular rooms connected together by paths. I want the paths between rooms to be natural-looking and windy, however. For example, I would not consider the following natural-looking: B X X X XX XX XX AXX I really want something more like this: B X XXXX X X X X AXXXXXXXX These paths must satisfy a few properties: I must be able to specify an area inside which they are bounded, I must be able to parameterize how windy and lengthy they are, The lines should not look like they started at one path and ended at the other. For example, the first example above looks as if it started at A and ended at B, because it basically changed directions repeatedly until it lined up with B and then just went straight there. I was hoping to use A*, but honestly I have no idea what my heuristic would be. I have also considered using a genetic algorithm, but I don't know how practical that method might end up. My question is, what is a good way to get the results I want? Please do not just specify a method like "A*" or "Dijkstra's algorithm," because I also need help with a good heuristic.

  Read the article

• Wicket Authorization Using MetaDataKey

  - by JGirl

  I am trying to implement a simple authorization strategy for my Wicket application. I am implemented my own AuthorizationStrategy (extending IAuthorizationStrategy). http://old.nabble.com/Authorization-strategy-help-td18948597.html After reading the above link, I figured it makes more sense to use metadata-driven authorization than one using Annotations. So I have a simple RoleCheck class public class RoleCheck { private String privilege; public RoleCheck(String priv) { this.privilege = priv; } public void setPrivilege(String privilege) { this.privilege = privilege; } public String getPrivilege() { return privilege; } } I add it a component public static MetaDataKey priv = new MetaDataKey() {}; editLink.setMetaData(priv, new RoleCheck("Update")); And in my Authorization Strategy class, I try to get the metadata associated with the component public boolean isActionAuthorized(Component component, Action action) { if (action.equals(Component.RENDER)) { RoleCheck privCheck = (RoleCheck) component.getMetaData(EditControlToolBar.priv); if (privCheck != null) { ... } } However the getMetaData gives an error "Bound mismatch: The generic method getMetaData(MetaDataKey) of type Component is not applicable for the arguments (MetaDataKey). The inferred type RoleCheck is not a valid substitute for the bounded parameter " Any help would be appreciated. Thank you

  Read the article

• ACL architechture for a Software As a service in Spring 3.0

  - by geoaxis

  I am making a software as a service using Spring 3.0 (Spring MVC, Spring Security, Spring Roo, Hibernate) I have to come up with a flexible access control list mechanism.I have three different kinds of users System (who can do any thing to the system, includes admin and internal daemons) Operations (who can add and delete users, organizations, and do maintenance work on behalf of users and organizations) End Users (they belong to one or more organization, for each organization, the user can have one or more roles, like being organization admin, or organization read-only member) (role like orgadmin can also add users for that organization) Now my question is, how should i model the entity of User? If I just take the End User, it can belong to one or more organizations, so each user can contain a set of references to its organizations. But how do we model the users role for each organization, So for example User UX belongs to organizations og1, og2 and og3, and for og1 he is both orgadmin, and org-read-only-user, where as for og2 he is only orgadmin and for og3 he is only org-read-only-user I have the possibility of making each user belong to one organization alone, but that's making the system bounded and I don't like that idea (although i would still satisfy the requirement) If you have a better extensible ACL architecture, please suggest it. Since its a software as a service, one would expect that alot of different organizations would be part if the same system. I had one concern that it is not a good idea to keep og1 and og2 data on the same DB (if og1 decides to spawn a 100 reports on the system, og2 should not suffer) But that is some thing advanced for now and is not directly related to ACL but to the physical distribution of data and setup of services based on those ACLs This is a community Wiki question, please correct any thing which you wish to do so. Thanks

  Read the article

• Using Moq callbacks correctly according to AAA

  - by Hadi Eskandari

  I've created a unit test that tests interactions on my ViewModel class in a Silverlight application. To be able to do this test, I'm mocking the service interface, injected to the ViewModel. I'm using Moq framework to do the mocking. to be able to verify bounded object in the ViewModel is converted properly, I've used a callback: [Test] public void SaveProposal_Will_Map_Proposal_To_WebService_Parameter() { var vm = CreateNewCampaignViewModel(); var proposal = CreateNewProposal(1, "New Proposal"); Services.Setup(x => x.SaveProposalAsync(It.IsAny<saveProposalParam>())).Callback((saveProposalParam p) => { Assert.That(p.plainProposal, Is.Not.Null); Assert.That(p.plainProposal.POrderItem.orderItemId, Is.EqualTo(1)); Assert.That(p.plainProposal.POrderItem.orderName, Is.EqualTo("New Proposal")); }); proposal.State = ObjectStates.Added; vm.CurrentProposal = proposal; vm.Save(); } It is working fine, but if you've noticed, using this mechanism the Assert and Act part of the unit test have switched their parts (Assert comes before Acting). Is there a better way to do this, while preserving correct AAA order?

  Read the article

• Binding data to the custom DataGridView

  - by Jatin Chaturvedi

  All, I have a customized DataGridView where I have implemented extra functionality and bounded datasource in the same custom DataGridView (Using C# and .NET). Now, I could able to use it properly by placing it on a panel control. I have added label as button on panel control to display data from datasource on to datagrid and create a binding source. Another Label which act as a button is used to update data from grid to databse. Issue: I pressed show label to display data in a dsatagridview. Modified the grid cell value and immediately pressed update label which is on same panel control. I observed that, the cursor is still in the grid cell when I press Save button. While saving, the cell value is null even though I have entered something in the presentation layer. My expected behaviour is to get the modified value while saving. Special Case: After typing something in the grid cell, if I click on somewhere else like the row below where I entered something, before I click on Save button, it is working fine. (Here, mainly I tried to remove the focus from the currently modified cell) Is there any way to bind sources before I click on save button? Please suggest me. Please feel free to ask me if you need any information. I have also seen same kind of problem on this forum, but unfortunately the author got the answer and didnt post it back. here is that URL: http://social.msdn.microsoft.com/Forums/en/winformsdesigner/thread/54dcc87a-adc2-4965-b306-9aa9e79c2946 Please help me.

  Read the article

• What is the name of this geometrical function?

  - by Spike

  In a two dimentional integer space, you have two points, A and B. This function returns an enumeration of the points in the quadrilateral subset bounded by A and B. A = {1,1} B = {2,3} Fn(A,B) = {{1,1},{1,2},{1,3},{2,1},{2,2},{2,3}} I can implement it in a few lines of LINQ. private void UnknownFunction(Point to, Point from, List<Point> list) { var vectorX = Enumerable.Range(Math.Min(to.X, from.X), Math.Abs(to.X - from.Y) + 1); var vectorY = Enumerable.Range(Math.Min(to.Y, from.Y), Math.Abs(to.Y - from.Y) + 1); foreach (var x in vectorX) foreach (var y in vectorY) list.Add(new Point(x, y)); } I'm fairly sure that this is a standard mathematical operation, but I can't think what it is. Feel free to tell me that it's one line of code in your language of choice. Or to give me a cunning implementation with lambdas or some such. But mostly I just want to know what it's called. It's driving me nuts. It feels a little like a convolution, but it's been too long since I was at school for me to be sure.

  Read the article

• Binding DataTemplates (or another aproach)

  - by Bataglião

  Hi all, I'm having some troubles trying to dynamically generate content in WPF and after it bind data. I have the following scenario: TabControl - Dynamically generated TabItems through DataTemplate - inside TabItems, I have dynamic content generated by DataTemplate that I wish to bind (ListBox). The code follows: ::TabControl <TabControl Height="252" HorizontalAlignment="Left" Name="tabControl1" VerticalAlignment="Top" Width="458" Margin="12,12,12,12" ContentTemplate="{StaticResource tabItemContent}"></TabControl> ::The Template for TabControl to generate TabItems <DataTemplate x:Key="tabItemContent"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="*" /> </Grid.RowDefinitions> <ListBox ItemTemplate="{StaticResource listBoxContent}" ItemsSource="{Binding}"> </ListBox> </Grid> </DataTemplate> ::The template for ListBox Inside each TabItem <DataTemplate x:Key="listBoxContent"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="22"/> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Image Grid.Column="0" Source="{Binding Path=PluginIcon}" /> <TextBlock Grid.Column="1" Text="{Binding Path=Text}" /> </Grid> </DataTemplate> So, when I try to do this on code inside a loop to create the tabitems: TabItem tabitem = tabControl1.Items[catIndex] as TabItem; tabitem.DataContext = plugins.ToList(); where 'plugins' is an Enumerable The ListBox is not bounded. I tried also to find the ListBox inside the TabItem to set the ItemSource property but no success at all. Someone have an idea on how to do that? Thanks in advance.

  Read the article

• ACL architechture for a Software As a service in Sprgin 3.0

  - by geoaxis

  I am making a software as a service using Spring 3.0 (Spring MVC, Spring Security, Spring Roo, Hibernate) I have to come up with a flexible access control list mechanism.I have three different kinds of users System (who can do any thing to the system, includes admin and internal daemons) Operations (who can add and delete users, organizations, and do maintenance work on behalf of users and organizations) End Users (they belong to one or more organization, for each organization, the user can have one or more roles, like being organization admin, or organization read-only member) (role like orgadmin can also add users for that organization) Now my question is, how should i model the entity of User? If I just take the End User, it can belong to one or more organizations, so each user can contain a set of references to its organizations. But how do we model the users role for each organization, So for example User UX belongs to organizations og1, og2 and og3, and for og1 he is both orgadmin, and org-read-only-user, where as for og2 he is only orgadmin and for og3 he is only org-read-only-user I have the possibility of making each user belong to one organization alone, but that's making the system bounded and I don't like that idea (although i would still satisfy the requirement) If you have a better extensible ACL architecture, please suggest it. Since its a software as a service, one would expect that alot of different organizations would be part if the same system. I had one concern that it is not a good idea to keep og1 and og2 data on the same DB (if og1 decides to spawn a 100 reports on the system, og2 should not suffer) But that is some thing advanced for now and is not directly related to ACL but to the physical distribution of data and setup of services based on those ACLs This is a community Wiki question, please correct any thing which you wish to do so. Thanks

  Read the article

• Magic function `bash ` not found

  - by inspectorG4dget

  I have a bunch of simulations that I want to run on a high-performance cluster, on which I should make reservations to get computing time. Since the reservations are bounded by time, I am developing an automation script that I can scp into the cluster and run. This script will then download the relevant simulation files, run them, and upload the results. Part of this automation script is in bash (cp, scp, etc) and the rest is in python. In order to develop this automation, I am using an IPython notebook. So far, I've coded all the python automation stuff in my IPython notebook and am trying to write the bash part of it now. However, it seems that the magic %%bash doesn't work in my IPython notebook. I get the following error when I have this code in my cell: Cell %%bash echo hi Error File "<ipython-input-22-62ec98e35224>", line 3 echo hi ^ SyntaxError: invalid syntax On a whim, I tried this: Cell %%bash print "hi" Error hi ERROR: Magic function `bash` not found. So I tried this with %%system, %%! and %%shell. But none of those work; they all give me the same error. Why is this happening? How can I fix this? Metadata: IPython 0.13.dev Python 2.7.1 Mac OS X Lion

  Read the article

• Simplest distributed persistent key/value store that supports primary key range queries

  - by StaxMan

  I am looking for a properly distributed (i.e. not just sharded) and persisted (not bounded by available memory on single node, or cluster of nodes) key/value ("nosql") store that does support range queries by primary key. So far closest such system is Cassandra, which does above. However, it adds support for other features that are not essential for me. So while I like it (and will consider using it of course), I am trying to figure out if there might be other mature projects that implement what I need. Specifically, for me the only aspect of value I need is to access it as a blob. For key, however, I need range queries (as in, access values ordered, limited by start and/or end values). While values can have structures, there is no need to use that structure for anything on server side (can do client-side data binding, flexible value/content types etc). For added bonus, Cassandra style storage (journaled, all sequential writes) seems quite optimal for my use case. To help filter out answers, I have investigated some alternatives within general domain like: Voldemort (key/value, but no ordering) and CouchDB (just sharded, more batch-oriented); and am aware of systems that are not quite distributed while otherwise qualifying (bdb variants, tokyo cabinet itself (not sure if Tyrant might qualify), redis (in-memory store only)).

  Read the article

• How to make ActiveRecord work with legacy partitioned/sharded databases/tables?

  - by Utensil

  thanks for your time first...after all the searching on google, github and here, and got more confused about the big words(partition/shard/fedorate),I figure that I have to describe the specific problem I met and ask around. My company's databases deals with massive users and orders, so we split databases and tables in various ways, some are described below: way database and table name shard by (maybe it's should be called partitioned by?) YZ.X db_YZ.tb_X order serial number last three digits YYYYMMDD. db_YYYYMMDD.tb date YYYYMM.DD db_YYYYMM.tb_ DD date too The basic concept is that databases and tables are seperated acording to a field(not nessissarily the primary key), and there are too many databases and too many tables, so that writing or magically generate one database.yml config for each database and one model for each table isn't possible or at least not the best solution. I looked into drnic's magic solutions, and datafabric, and even the source code of active record, maybe I could use ERB to generate database.yml and do database connection in around filter, and maybe I could use named_scope to dynamically decide the table name for find, but update/create opertions are bounded to "self.class.quoted_table_name" so that I couldn't easily get my problem solved. And even I could generate one model for each table, because its amount is up to 30 most. But this is just not DRY! What I need is a clean solution like the following DSL: class Order < ActiveRecord::Base shard_by :order_serialno do |key| [get_db_config_by(key), #because some or all of the databaes might share the same machine in a regular way or can be configed by a hash of regex, and it can also be a const get_db_name_by(key), get_tb_name_by(key), ] end end Can anybody enlight me? Any help would be greatly appreciated~~~~

  Read the article

• <span> containing 3 overlapping images has 3x the necessary width

  - by Nathan Parrish

  Hi guys, I have a element, containing three overlapping images. Inspecting the element in Chrome shows this: <span id=?"span1">? <img id=?"img1" src=?"images/?progressbar.gif" width=?"120" style=?"position:? relative;? z-index:? 3;?">? <img id=?"img2" src=?"images/?progressbar.gif" style=?"width:? 120px;? height:? 12px;?? position:? relative;? left:? -120px;? z-index:? 2;?">? <img id=?"img3" src=?"images/?progressbar.gif" style=?"width:? 120px;? height:? 12px;? position:? relative;? left:? -240px;? z-index:? 1;?">? </span>? The important point is that the second two images are given a relative position, shifting them to the left so they perfectly overlap the first. But the span itself is still 360 pixels wide (3 x 120 pixels per image). So how can I achieve this effect while keeping the span width tightly bounded around the images? Thanks!

  Read the article

• NET Math Libraries

  - by JoshReuben

  NET Mathematical Libraries   .NET Builder for Matlab The MathWorks Inc. - http://www.mathworks.com/products/netbuilder/ MATLAB Builder NE generates MATLAB based .NET and COM components royalty-free deployment creates the components by encrypting MATLAB functions and generating either a .NET or COM wrapper around them. .NET/Link for Mathematica www.wolfram.com a product that 2-way integrates Mathematica and Microsoft's .NET platform call .NET from Mathematica - use arbitrary .NET types directly from the Mathematica language. use and control the Mathematica kernel from a .NET program. turns Mathematica into a scripting shell to leverage the computational services of Mathematica. write custom front ends for Mathematica or use Mathematica as a computational engine for another program comes with full source code. Leverages MathLink - a Wolfram Research's protocol for sending data and commands back and forth between Mathematica and other programs. .NET/Link abstracts the low-level details of the MathLink C API. Extreme Optimization http://www.extremeoptimization.com/ a collection of general-purpose mathematical and statistical classes built for the.NET framework. It combines a math library, a vector and matrix library, and a statistics library in one package. download the trial of version 4.0 to try it out. Multi-core ready - Full support for Task Parallel Library features including cancellation. Broad base of algorithms covering a wide range of numerical techniques, including: linear algebra (BLAS and LAPACK routines), numerical analysis (integration and differentiation), equation solvers. Mathematics leverages parallelism using .NET 4.0's Task Parallel Library. Basic math: Complex numbers, 'special functions' like Gamma and Bessel functions, numerical differentiation. Solving equations: Solve equations in one variable, or solve systems of linear or nonlinear equations. Curve fitting: Linear and nonlinear curve fitting, cubic splines, polynomials, orthogonal polynomials. Optimization: find the minimum or maximum of a function in one or more variables, linear programming and mixed integer programming. Numerical integration: Compute integrals over finite or infinite intervals, over 2D and higher dimensional regions. Integrate systems of ordinary differential equations (ODE's). Fast Fourier Transforms: 1D and 2D FFT's using managed or fast native code (32 and 64 bit) BigInteger, BigRational, and BigFloat: Perform operations with arbitrary precision. Vector and Matrix Library Real and complex vectors and matrices. Single and double precision for elements. Structured matrix types: including triangular, symmetrical and band matrices. Sparse matrices. Matrix factorizations: LU decomposition, QR decomposition, singular value decomposition, Cholesky decomposition, eigenvalue decomposition. Portability and performance: Calculations can be done in 100% managed code, or in hand-optimized processor-specific native code (32 and 64 bit). Statistics Data manipulation: Sort and filter data, process missing values, remove outliers, etc. Supports .NET data binding. Statistical Models: Simple, multiple, nonlinear, logistic, Poisson regression. Generalized Linear Models. One and two-way ANOVA. Hypothesis Tests: 12 14 hypothesis tests, including the z-test, t-test, F-test, runs test, and more advanced tests, such as the Anderson-Darling test for normality, one and two-sample Kolmogorov-Smirnov test, and Levene's test for homogeneity of variances. Multivariate Statistics: K-means cluster analysis, hierarchical cluster analysis, principal component analysis (PCA), multivariate probability distributions. Statistical Distributions: 25 29 continuous and discrete statistical distributions, including uniform, Poisson, normal, lognormal, Weibull and Gumbel (extreme value) distributions. Random numbers: Random variates from any distribution, 4 high-quality random number generators, low discrepancy sequences, shufflers. New in version 4.0 (November, 2010) Support for .NET Framework Version 4.0 and Visual Studio 2010 TPL Parallellized – multicore ready sparse linear program solver - can solve problems with more than 1 million variables. Mixed integer linear programming using a branch and bound algorithm. special functions: hypergeometric, Riemann zeta, elliptic integrals, Frensel functions, Dawson's integral. Full set of window functions for FFT's. Product  Price Update subscription Single Developer License $999  $399  Team License (3 developers) $1999  $799  Department License (8 developers) $3999  $1599  Site License (Unlimited developers in one physical location) $7999  $3199    NMath http://www.centerspace.net .NET math and statistics libraries matrix and vector classes random number generators Fast Fourier Transforms (FFTs) numerical integration linear programming linear regression curve and surface fitting optimization hypothesis tests analysis of variance (ANOVA) probability distributions principal component analysis cluster analysis built on the Intel Math Kernel Library (MKL), which contains highly-optimized, extensively-threaded versions of BLAS (Basic Linear Algebra Subroutines) and LAPACK (Linear Algebra PACKage). Product  Price Update subscription Single Developer License $1295 $388 Team License (5 developers) $5180 $1554   DotNumerics http://www.dotnumerics.com/NumericalLibraries/Default.aspx free DotNumerics is a website dedicated to numerical computing for .NET that includes a C# Numerical Library for .NET containing algorithms for Linear Algebra, Differential Equations and Optimization problems. The Linear Algebra library includes CSLapack, CSBlas and CSEispack, ports from Fortran to C# of LAPACK, BLAS and EISPACK, respectively. Linear Algebra (CSLapack, CSBlas and CSEispack). Systems of linear equations, eigenvalue problems, least-squares solutions of linear systems and singular value problems. Differential Equations. Initial-value problem for nonstiff and stiff ordinary differential equations ODEs (explicit Runge-Kutta, implicit Runge-Kutta, Gear's BDF and Adams-Moulton). Optimization. Unconstrained and bounded constrained optimization of multivariate functions (L-BFGS-B, Truncated Newton and Simplex methods).   Math.NET Numerics http://numerics.mathdotnet.com/ free an open source numerical library - includes special functions, linear algebra, probability models, random numbers, interpolation, integral transforms. A merger of dnAnalytics with Math.NET Iridium in addition to a purely managed implementation will also support native hardware optimization. constants & special functions complex type support real and complex, dense and sparse linear algebra (with LU, QR, eigenvalues, ... decompositions) non-uniform probability distributions, multivariate distributions, sample generation alternative uniform random number generators descriptive statistics, including order statistics various interpolation methods, including barycentric approaches and splines numerical function integration (quadrature) routines integral transforms, like fourier transform (FFT) with arbitrary lengths support, and hartley spectral-space aware sequence manipulation (signal processing) combinatorics, polynomials, quaternions, basic number theory. parallelized where appropriate, to leverage multi-core and multi-processor systems fully managed or (if available) using native libraries (Intel MKL, ACMS, CUDA, FFTW) provides a native facade for F# developers

  Read the article

• Visual Studio Little Wonders: Box Selection

  - by James Michael Hare

  So this week I decided I’d do a Little Wonder of a different kind and focus on an underused IDE improvement: Visual Studio’s Box Selection capability. This is a handy feature that many people still don’t realize was made available in Visual Studio 2010 (and beyond).  True, there have been other editors in the past with this capability, but now that it’s fully part of Visual Studio we can enjoy it’s goodness from within our own IDE. So, for those of you who don’t know what box selection is and what it allows you to do, read on! Sometimes, we want to select beyond the horizontal… The problem with traditional text selection in many editors is that it is horizontally oriented.  Sure, you can select multiple rows, but if you do you will pull in the entire row (at least for the middle rows).  Under the old selection scheme, if you wanted to select a portion of text from each row (a “box” of text) you were out of luck.  Box selection rectifies this by allowing you to select a box of text that bounded by a selection rectangle that you can grow horizontally or vertically.  So let’s think a situation that could occur where this comes in handy. Let’s say, for instance, that we are defining an enum in our code that we want to be able to translate into some string values (possibly to be stored in a database, output to screen, etc.). Perhaps such an enum would look like this: 1: public enum OrderType 2: { 3: Buy, // buy shares of a commodity 4: Sell, // sell shares of a commodity 5: Exchange, // exchange one commodity for another 6: Cancel, // cancel an order for a commodity 7: } 8:  Now, let’s say we are in the process of creating a Dictionary<K,V> to translate our OrderType: 1: var translator = new Dictionary<OrderType, string> 2: { 3: // do I really want to retype all this??? 4: }; Yes the example above is contrived so that we will pull some garbage if we do a multi-line select. I could select the lines above using the traditional multi-line selection: And then paste them into the translator code, which would result in this: 1: var translator = new Dictionary<OrderType, string> 2: { 3: Buy, // buy shares of a commodity 4: Sell, // sell shares of a commodity 5: Exchange, // exchange one commodity for another 6: Cancel, // cancel an order for a commodity 7: }; But I have a lot of junk there, sure I can manually clear it out, or use some search and replace magic, but if this were hundreds of lines instead of just a few that would quickly become cumbersome. The Box Selection Now that we have the ability to create box selections, we can select the box of text to delete!  Most of us are familiar with the fact we can drag the mouse (or hold [Shift] and use the arrow keys) to create a selection that can span multiple rows: Box selection, however, actually allows us to select a box instead of the typical horizontal lines: Then we can press the [delete] key and the pesky comments are all gone! You can do this either by holding down [Alt] while you select with your mouse, or by holding down [Alt+Shift] and using the arrow keys on the keyboard to grow the box horizontally or vertically. So now we have: 1: var translator = new Dictionary<OrderType, string> 2: { 3: Buy, 4: Sell, 5: Exchange, 6: Cancel, 7: }; Which is closer, but we still need an opening curly, the string to translate to, and the closing curly and comma. Fortunately, again, this is easy with box selections due to the fact box selection can even work for a zero-width selection! That is, hold down [Alt] and either drag down with no width, or hold down [Alt+Shift] and arrow down and you will define a selection range with no width, essentially, a vertical line selection: Notice the faint selection line on the right? So why is this useful? Well, just like with any selected range, we can type and it will replace the selection. What does this mean for box selections? It means that we can insert the same text all the way down on each line! If we have the same selection above, and type a curly and a space, we’d get: Imagine doing this over hundreds of lines and think of what a time saver it could be! Now make a zero-width selection on the other side: And type a curly and a comma, and we’d get: So close! Now finally, imagine we’ve already defined these strings somewhere and want to paste them in: 1: const private string BuyText = "Buy Shares"; 2: const private string SellText = "Sell Shares"; 3: const private string ExchangeText = "Exchange"; 4: const private string CancelText = "Cancel"; We can, again, use our box selection to pull out the constant names: And clicking copy (or [CTRL+C]) and then selecting a range to paste into: And finally clicking paste (or [CTRL+V]) to get the final result: 1: var translator = new Dictionary<OrderType, string> 2: { 3: { Buy, BuyText }, 4: { Sell, SellText }, 5: { Exchange, ExchangeText }, 6: { Cancel, CancelText }, 7: };   Sure, this was a contrived example, but I’m sure you’ll agree that it adds myriad possibilities of new ways to copy and paste vertical selections, as well as inserting text across a vertical slice. Summary: While box selection has been around in other editors, we finally get to experience it in VS2010 and beyond. It is extremely handy for selecting columns of information for cutting, copying, and pasting. In addition, it allows you to create a zero-width vertical insertion point that can be used to enter the same text across multiple rows. Imagine the time you can save adding repetitive code across multiple lines!  Try it, the more you use it, the more you’ll love it! Technorati Tags: C#,CSharp,.NET,Visual Studio,Little Wonders,Box Selection

  Read the article

• Getting Started with ADF Mobile Sample Apps

  - by Denis T

  Getting Started with ADF Mobile Sample Apps   Installation Steps Install JDeveloper 11.1.2.3.0 from Oracle Technology Network After installing JDeveloper, go to Help menu and select "Check For Updates" and find the ADF Mobile extension and install this. It will require you restart JDeveloper For iOS development, be on a Mac and have Xcode installed. (Currently only Xcode 4.4 is officially supported. Xcode 4.5 support is coming soon) For Android development, have the Android SDK installed. In the JDeveloper Tools menu, select "Preferences". In the Preferences dialog, select ADF Mobile. You can expand it to select configure your Platform preferences for things like the location of Xcode and the Android SDK. In your /jdeveloper/jdev/extensions/oracle.adf.mobile/Samples folder you will find a PublicSamples.zip. Unzip this into the Samples folder so you have all the projects ready to go. Open each of the sample application's .JWS file to open the corresponding workspace. Then from the "Application" menu, select "Deploy" and then select the deployment profile for the platform you wish to deploy to. Try deploying to the simulator/emulator on each platform first because it won't require signing. Note: If you wish to deploy to the Android emulator, it must be running before you start the deployment.   Sample Application Details   Recommended Order of Use Application Name Description 1 HelloWorld The "hello world" application for ADF Mobile, which demonstrates the basic structure of the framework. This basic application has a single application feature that is implemented with a local HTML file. Use this application to ascertain that the development environment is set up correctly to compile and deploy an application. See also Section 4.2.2, "What Happens When You Create an ADF Mobile Application." 2 CompGallery This application is meant to be a runtime application and not necessarily to review the code, though that is available. It serves as an introduction to the ADF Mobile AMX UI components by demonstrating all of these components. Using this application, you can change the attributes of these components at runtime and see the effects of those changes in real time without recompiling and redeploying the application after each change. See generally Chapter 8, "Creating ADF Mobile AMX User Interface." 3 LayoutDemo This application demonstrates the user interface layout and shows how to create the various list and button styles that are commonly used in mobile applications. It also demonstrates how to create the action sheet style of a popup component and how to use various chart and gauge components. See Section 8.3, "Creating and Using UI Components" and Section 8.5, "Providing Data Visualization." Note: This application must be opened from the Samples directory or the Default springboard option must be cleared in the Applications page of the adfmf-application.xml overview editor, then selected again. 4 JavaDemo This application demonstrates how to bind the user interface to Java beans. It also demonstrates how to invoke EL bindings from the Java layer using the supplied utility classes. See also Section 8.10, "Using Event Listeners" and Section 9.2, "Understanding EL Support." 5 Navigation This application demonstrates the various navigation techniques in ADF Mobile, including bounded task flows and routers. It also demonstrates the various page transitions. See also Section 7.2, "Creating Task Flows." Note: This application must be opened from the Samples directory or the Default springboard option must be cleared in the Applications page of the adfmf-application.xml overview editor, then selected again. 6 LifecycleEvents This application implements lifecycle event handlers on the ADF Mobile application itself and its embedded application features. This application shows you where to insert code to enable the applications to perform their own logic at certain points in the lifecycle. See also Section 5.6, "About Lifecycle Event Listeners." Note: iOS, the LifecycleEvents sample application logs data to the Console application, located at Applications-Utilities-Console application. 7 DeviceDemo This application shows you how to use the DeviceFeatures data control to expose such device features as geolocation, e-mail, SMS, and contacts, as well as how to query the device for its properties. See also Section 9.5, "Using the DeviceFeatures Data Control." Note: You must also run this application on an actual device because SMS and some of the device properties do not function on an iOS simulator or Android emulator. 8 GestureDemo This application demonstrates how gestures can be implemented and used in ADF Mobile applications. See also Section 8.4, "Enabling Gestures." 9 StockTracker This application demonstrates how data change events use Java to enable data changes to be reflected in the user interface. It also has a variety of layout use cases, gestures and basic mobile patterns. See also Section 9.7, "Data Change Events."

  Read the article

• Blit Queue Optimization Algorithm

  - by martona

  I'm looking to implement a module that manages a blit queue. There's a single surface, and portions of this surface (bounded by rectangles) are copied to elsewhere within the surface: add_blt(rect src, point dst); There can be any number of operations posted, in order, to the queue. Eventually the user of the queue will stop posting blits, and ask for an optimal set of operations to actually perform on the surface. The task of the module is to ensure that no pixel is copied unnecessarily. This gets tricky because of overlaps of course. A blit could re-blit a previously copied pixel. Ideally blit operations would be subdivided in the optimization phase in such a way that every block goes to its final place with a single operation. It's tricky but not impossible to put this together. I'm just trying to not reinvent the wheel. I looked around on the 'net, and the only thing I found was the SDL_BlitPool Library which assumes that the source surface differs from the destination. It also does a lot of grunt work, seemingly unnecessarily: regions and similar building blocks are a given. I'm looking for something higher-level. Of course, I'm not going to look a gift horse in the mouth, and I also don't mind doing actual work... If someone can come forward with a basic idea that makes this problem seem less complex than it does right now, that'd be awesome too. EDIT: Thinking about aaronasterling's answer... could this work? Implement customized region handler code that can maintain metadata for every rectangle it contains. When the region handler splits up a rectangle, it will automatically associate the metadata of this rectangle with the resulting sub-rectangles. When the optimization run starts, create an empty region handled by the above customized code, call this the master region Iterate through the blt queue, and for every entry: Let srcrect be the source rectangle for the blt beng examined Get the intersection of srcrect and master region into temp region Remove temp region from master region, so master region no longer covers temp region Promote srcrect to a region (srcrgn) and subtract temp region from it Offset temp region and srcrgn with the vector of the current blt: their union will cover the destination area of the current blt Add to master region all rects in temp region, retaining the original source metadata (step one of adding the current blt to the master region) Add to master region all rects in srcrgn, adding the source information for the current blt (step two of adding the current blt to the master region) Optimize master region by checking if adjacent sub-rectangles that are merge candidates have the same metadata. Two sub-rectangles are merge candidates if (r1.x1 == r2.x1 && r1.x2 == r2.x2) | (r1.y1 == r2.y1 && r1.y2 == r2.y2). If yes, combine them. Enumerate master region's sub-rectangles. Every rectangle returned is an optimized blt operation destination. The associated metadata is the blt operation`s source.

  Read the article

• Using the BAM Interceptor with Continuation

  - by Charles Young

  Originally posted on: http://geekswithblogs.net/cyoung/archive/2014/06/02/using-the-bam-interceptor-with-continuation.aspxI’ve recently been resurrecting some code written several years ago that makes extensive use of the BAM Interceptor provided as part of BizTalk Server’s BAM event observation library.  In doing this, I noticed an issue with continuations.  Essentially, whenever I tried to configure one or more continuations for an activity, the BAM Interceptor failed to complete the activity correctly.   Careful inspection of my code confirmed that I was initializing and invoking the BAM interceptor correctly, so I was mystified.  However, I eventually found the problem.  It is a logical error in the BAM Interceptor code itself. The BAM Interceptor provides a useful mechanism for implementing dynamic tracking.  It supports configurable ‘track points’.  These are grouped into named ‘locations’.  BAM uses the term ‘step’ as a synonym for ‘location’.   Each track point defines a BAM action such as starting an activity, extracting a data item, enabling a continuation, etc.  Each step defines a collection of track points. Understanding Steps The BAM Interceptor provides an abstract model for handling configuration of steps.  It doesn’t, however, define any specific configuration mechanism (e.g., config files, SSO, etc.)  It is up to the developer to decide how to store, manage and retrieve configuration data.  At run time, this configuration is used to register track points which then drive the BAM Interceptor. The full semantics of a step are not immediately clear from Microsoft’s documentation.  They represent a point in a business activity where BAM tracking occurs.  They are named locations in the code.  What is less obvious is that they always represent either the full tracking work for a given activity or a discrete fragment of that work which commences with the start of a new activity or the continuation of an existing activity.  The BAM Interceptor enforces this by throwing an error if no ‘start new’ or ‘continue’ track point is registered for a named location. This constraint implies that each step must marked with an ‘end activity’ track point.  One of the peculiarities of BAM semantics is that when an activity is continued under a correlated ID, you must first mark the current activity as ‘ended’ in order to ensure the right housekeeping is done in the database.  If you re-start an ended activity under the same ID, you will leave the BAM import tables in an inconsistent state.  A step, therefore, always represents an entire unit of work for a given activity or continuation ID.  For activities with continuation, each unit of work is termed a ‘fragment’. Instance and Fragment State Internally, the BAM Interceptor maintains state data at two levels.  First, it represents the overall state of the activity using a ‘trace instance’ token.  This token contains the name and ID of the activity together with a couple of state flags.  The second level of state represents a ‘trace fragment’.   As we have seen, a fragment of an activity corresponds directly to the notion of a ‘step’.  It is the unit of work done at a named location, and it must be bounded by start and end, or continue and end, actions. When handling continuations, the BAM Interceptor differentiates between ‘root’ fragments and other fragments.  Very simply, a root fragment represents the start of an activity.  Other fragments represent continuations.  This is where the logic breaks down.  The BAM Interceptor loses state integrity for root fragments when continuations are defined. Initialization Microsoft’s BAM Interceptor code supports the initialization of BAM Interceptors from track point configuration data.  The process starts by populating an Activity Interceptor Configuration object with an array of track points.  These can belong to different steps (aka ‘locations’) and can be registered in any order.  Once it is populated with track points, the Activity Interceptor Configuration is used to initialise the BAM Interceptor.  The BAM Interceptor sets up a hash table of array lists.  Each step is represented by an array list, and each array list contains an ordered set of track points.  The BAM Interceptor represents track points as ‘executable’ components.  When the OnStep method of the BAM Interceptor is called for a given step, the corresponding list of track points is retrieved and each track point is executed in turn.  Each track point retrieves any required data using a call back mechanism and then serializes a BAM trace fragment object representing a specific action (e.g., start, update, enable continuation, stop, etc.).  The serialised trace fragment is then handed off to a BAM event stream (buffered or direct) which takes the appropriate action. The Root of the Problem The logic breaks down in the Activity Interceptor Configuration.  Each Activity Interceptor Configuration is initialised with an instance of a ‘trace instance’ token.  This provides the basic metadata for the activity as a whole.  It contains the activity name and ID together with state flags indicating if the activity ID is a root (i.e., not a continuation fragment) and if it is completed.  This single token is then shared by all trace actions for all steps registered with the Activity Interceptor Configuration. Each trace instance token is automatically initialised to represent a root fragment.  However, if you subsequently register a ‘continuation’ step with the Activity Interceptor Configuration, the ‘root’ flag is set to false at the point the ‘continue’ track point is registered for that step.   If you use a ‘reflector’ tool to inspect the code for the ActivityInterceptorConfiguration class, you can see the flag being set in one of the overloads of the RegisterContinue method.    This makes no sense.  The trace instance token is shared across all the track points registered with the Activity Interceptor Configuration.  The Activity Interceptor Configuration is designed to hold track points for multiple steps.  The ‘root’ flag is clearly meant to be initialised to ‘true’ for the preliminary root fragment and then subsequently set to false at the point that a continuation step is processed.  Instead, if the Activity Interceptor Configuration contains a continuation step, it is changed to ‘false’ before the root fragment is processed.  This is clearly an error in logic. The problem causes havoc when the BAM Interceptor is used with continuation.  Effectively the root step is no longer processed correctly, and the ultimate effect is that the continued activity never completes!   This has nothing to do with the root and the continuation being in the same process.  It is due to a fundamental mistake of setting the ‘root’ flag to false for a continuation before the root fragment is processed. The Workaround Fortunately, it is easy to work around the bug.  The trick is to ensure that you create a new Activity Interceptor Configuration object for each individual step.  This may mean filtering your configuration data to extract the track points for a single step or grouping the configured track points into individual steps and the creating a separate Activity Interceptor Configuration for each group.  In my case, the first approach was required.  Here is what the amended code looks like: // Because of a logic error in Microsoft's code, a separate ActivityInterceptorConfiguration must be used // for each location. The following code extracts only those track points for a given step name (location). var trackPointGroup = from ResolutionService.TrackPoint tp in bamActivity.TrackPoints                       where (string)tp.Location == bamStepName                       select tp; var bamActivityInterceptorConfig =     new Microsoft.BizTalk.Bam.EventObservation.ActivityInterceptorConfiguration(activityName); foreach (var trackPoint in trackPointGroup) {     switch (trackPoint.Type)     {         case TrackPointType.Start:             bamActivityInterceptorConfig.RegisterStartNew(trackPoint.Location, trackPoint.ExtractionInfo);             break; etc… I’m using LINQ to filter a list of track points for those entries that correspond to a given step and then registering only those track points on a new instance of the ActivityInterceptorConfiguration class.   As soon as I re-wrote the code to do this, activities with continuations started to complete correctly.

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >