Search Results

Search found 698 results on 28 pages for 'shader'.

Page 5/28 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • My vertex shader doesn't affect texture coords or diffuse info but works for position

    - by tina nyaa
    I am new to 3D and DirectX - in the past I have only used abstractions for 2D drawing. Over the past month I've been studying really hard and I'm trying to modify and adapt some of the shaders as part of my personal 'study project'. Below I have a shader, modified from one of the Microsoft samples. I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? // // Skinned Mesh Effect file // Copyright (c) 2000-2002 Microsoft Corporation. All rights reserved. // float4 lhtDir = {0.0f, 0.0f, -1.0f, 1.0f}; //light Direction float4 lightDiffuse = {0.6f, 0.6f, 0.6f, 1.0f}; // Light Diffuse float4 MaterialAmbient : MATERIALAMBIENT = {0.1f, 0.1f, 0.1f, 1.0f}; float4 MaterialDiffuse : MATERIALDIFFUSE = {0.8f, 0.8f, 0.8f, 1.0f}; // Matrix Pallette static const int MAX_MATRICES = 100; float4x3 mWorldMatrixArray[MAX_MATRICES] : WORLDMATRIXARRAY; float4x4 mViewProj : VIEWPROJECTION; /////////////////////////////////////////////////////// struct VS_INPUT { float4 Pos : POSITION; float4 BlendWeights : BLENDWEIGHT; float4 BlendIndices : BLENDINDICES; float3 Normal : NORMAL; float3 Tex0 : TEXCOORD0; }; struct VS_OUTPUT { float4 Pos : POSITION; float4 Diffuse : COLOR; float2 Tex0 : TEXCOORD0; }; float3 Diffuse(float3 Normal) { float CosTheta; // N.L Clamped CosTheta = max(0.0f, dot(Normal, lhtDir.xyz)); // propogate scalar result to vector return (CosTheta); } VS_OUTPUT VShade(VS_INPUT i, uniform int NumBones) { VS_OUTPUT o; float3 Pos = 0.0f; float3 Normal = 0.0f; float LastWeight = 0.0f; // Compensate for lack of UBYTE4 on Geforce3 int4 IndexVector = D3DCOLORtoUBYTE4(i.BlendIndices); // cast the vectors to arrays for use in the for loop below float BlendWeightsArray[4] = (float[4])i.BlendWeights; int IndexArray[4] = (int[4])IndexVector; // calculate the pos/normal using the "normal" weights // and accumulate the weights to calculate the last weight for (int iBone = 0; iBone < NumBones-1; iBone++) { LastWeight = LastWeight + BlendWeightsArray[iBone]; Pos += mul(i.Pos, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; Normal += mul(i.Normal, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; } LastWeight = 1.0f - LastWeight; // Now that we have the calculated weight, add in the final influence Pos += (mul(i.Pos, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); Normal += (mul(i.Normal, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); // transform position from world space into view and then projection space //o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Diffuse.x = 0.0f; o.Diffuse.y = 0.0f; o.Diffuse.z = 0.0f; o.Diffuse.w = 0.0f; o.Tex0 = float2(0,0); return o; } technique t0 { pass p0 { VertexShader = compile vs_3_0 VShade(4); } } I am currently using the SlimDX .NET wrapper around DirectX, but the API is extremely similar: public void Draw() { var device = vertexBuffer.Device; device.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.White, 1.0f, 0); device.SetRenderState(RenderState.Lighting, true); device.SetRenderState(RenderState.DitherEnable, true); device.SetRenderState(RenderState.ZEnable, true); device.SetRenderState(RenderState.CullMode, Cull.Counterclockwise); device.SetRenderState(RenderState.NormalizeNormals, true); device.SetSamplerState(0, SamplerState.MagFilter, TextureFilter.Anisotropic); device.SetSamplerState(0, SamplerState.MinFilter, TextureFilter.Anisotropic); device.SetTransform(TransformState.World, Matrix.Identity * Matrix.Translation(0, -50, 0)); device.SetTransform(TransformState.View, Matrix.LookAtLH(new Vector3(-200, 0, 0), Vector3.Zero, Vector3.UnitY)); device.SetTransform(TransformState.Projection, Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); var material = new Material(); material.Ambient = material.Diffuse = material.Emissive = material.Specular = new Color4(Color.White); material.Power = 1f; device.SetStreamSource(0, vertexBuffer, 0, vertexSize); device.VertexDeclaration = vertexDeclaration; device.Indices = indexBuffer; device.Material = material; device.SetTexture(0, texture); var param = effect.GetParameter(null, "mWorldMatrixArray"); var boneWorldTransforms = bones.OrderedBones.OrderBy(x => x.Id).Select(x => x.CombinedTransformation).ToArray(); effect.SetValue(param, boneWorldTransforms); effect.SetValue(effect.GetParameter(null, "mViewProj"), Matrix.Identity);// Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); effect.SetValue(effect.GetParameter(null, "MaterialDiffuse"), material.Diffuse); effect.SetValue(effect.GetParameter(null, "MaterialAmbient"), material.Ambient); effect.Technique = effect.GetTechnique(0); var passes = effect.Begin(FX.DoNotSaveState); for (var i = 0; i < passes; i++) { effect.BeginPass(i); device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, skin.Vertices.Length, 0, skin.Indicies.Length / 3); effect.EndPass(); } effect.End(); } Again, I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? Also, whatever I set in the bone transformation matrices doesn't seem to have an effect on my model. If I set every bone transformation to a zero matrix, the model still shows up as if nothing had happened, but changing the Pos field in shader output makes the model disappear. I don't understand why I'm getting this kind of behaviour. Thank you!

    Read the article

  • Ambient occlusion shader just shows models as all white

    - by dvds414
    Okay so I have this shader for ambient occlusion. It loads to world correctly, but it just shows all the models as being white. I do not know why. I am just running the shader while the model is rendering, is that correct? or do I need to make a render target or something? If so then how? I'm using C++. Here is my shader: float sampleRadius; float distanceScale; float4x4 xProjection; float4x4 xView; float4x4 xWorld; float3 cornerFustrum; struct VS_OUTPUT { float4 pos : POSITION; float2 TexCoord : TEXCOORD0; float3 viewDirection : TEXCOORD1; }; VS_OUTPUT VertexShaderFunction( float4 Position : POSITION, float2 TexCoord : TEXCOORD0) { VS_OUTPUT Out = (VS_OUTPUT)0; float4 WorldPosition = mul(Position, xWorld); float4 ViewPosition = mul(WorldPosition, xView); Out.pos = mul(ViewPosition, xProjection); Position.xy = sign(Position.xy); Out.TexCoord = (float2(Position.x, -Position.y) + float2( 1.0f, 1.0f ) ) * 0.5f; float3 corner = float3(-cornerFustrum.x * Position.x, cornerFustrum.y * Position.y, cornerFustrum.z); Out.viewDirection = corner; return Out; } texture depthTexture; texture randomTexture; sampler2D depthSampler = sampler_state { Texture = <depthTexture>; ADDRESSU = CLAMP; ADDRESSV = CLAMP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; sampler2D RandNormal = sampler_state { Texture = <randomTexture>; ADDRESSU = WRAP; ADDRESSV = WRAP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; float4 PixelShaderFunction(VS_OUTPUT IN) : COLOR0 { float4 samples[16] = { float4(0.355512, -0.709318, -0.102371, 0.0 ), float4(0.534186, 0.71511, -0.115167, 0.0 ), float4(-0.87866, 0.157139, -0.115167, 0.0 ), float4(0.140679, -0.475516, -0.0639818, 0.0 ), float4(-0.0796121, 0.158842, -0.677075, 0.0 ), float4(-0.0759516, -0.101676, -0.483625, 0.0 ), float4(0.12493, -0.0223423, -0.483625, 0.0 ), float4(-0.0720074, 0.243395, -0.967251, 0.0 ), float4(-0.207641, 0.414286, 0.187755, 0.0 ), float4(-0.277332, -0.371262, 0.187755, 0.0 ), float4(0.63864, -0.114214, 0.262857, 0.0 ), float4(-0.184051, 0.622119, 0.262857, 0.0 ), float4(0.110007, -0.219486, 0.435574, 0.0 ), float4(0.235085, 0.314707, 0.696918, 0.0 ), float4(-0.290012, 0.0518654, 0.522688, 0.0 ), float4(0.0975089, -0.329594, 0.609803, 0.0 ) }; IN.TexCoord.x += 1.0/1600.0; IN.TexCoord.y += 1.0/1200.0; normalize (IN.viewDirection); float depth = tex2D(depthSampler, IN.TexCoord).a; float3 se = depth * IN.viewDirection; float3 randNormal = tex2D( RandNormal, IN.TexCoord * 200.0 ).rgb; float3 normal = tex2D(depthSampler, IN.TexCoord).rgb; float finalColor = 0.0f; for (int i = 0; i < 16; i++) { float3 ray = reflect(samples[i].xyz,randNormal) * sampleRadius; //if (dot(ray, normal) < 0) // ray += normal * sampleRadius; float4 sample = float4(se + ray, 1.0f); float4 ss = mul(sample, xProjection); float2 sampleTexCoord = 0.5f * ss.xy/ss.w + float2(0.5f, 0.5f); sampleTexCoord.x += 1.0/1600.0; sampleTexCoord.y += 1.0/1200.0; float sampleDepth = tex2D(depthSampler, sampleTexCoord).a; if (sampleDepth == 1.0) { finalColor ++; } else { float occlusion = distanceScale* max(sampleDepth - depth, 0.0f); finalColor += 1.0f / (1.0f + occlusion * occlusion * 0.1); } } return float4(finalColor/16, finalColor/16, finalColor/16, 1.0f); } technique SSAO { pass P0 { VertexShader = compile vs_3_0 VertexShaderFunction(); PixelShader = compile ps_3_0 PixelShaderFunction(); } }

    Read the article

  • glsl shader to allow color change of skydome ogre3d

    - by Tim
    I'm still very new to all this but learning a lot. I'm putting together an application using Ogre3d as the rendering engine. So far I've got it running, with a simple scene, a day/night cycle system which is working okay. I'm now moving on to looking at changing the color of the skydome material based on the time of day. What I've done so far is to create a struct to hold the ColourValues for the different aspects of the scene. struct todColors { Ogre::ColourValue sky; Ogre::ColourValue ambient; Ogre::ColourValue sun; }; I created an array to store all the colours todColors sceneColours [4]; I populated the array with the colours I want to use for the various times of the day. For instance DayTime (when the sun is high in the sky) sceneColours[2].sky = Ogre::ColourValue(135/255, 206/255, 235/255, 255); sceneColours[2].ambient = Ogre::ColourValue(135/255, 206/255, 235/255, 255); sceneColours[2].sun = Ogre::ColourValue(135/255, 206/255, 235/255, 255); I've got code to work out the time of the day using a float currentHours to store the current hour of the day 10.5 = 10:30 am. This updates constantly and updates the sun as required. I am then calculating the appropriate colours for the time of day when relevant using else if( currentHour >= 4 && currentHour < 7) { // Lerp from night to morning Ogre::ColourValue lerp = Ogre::Math::lerp<Ogre::ColourValue, float>(sceneColours[GT_TOD_NIGHT].sky , sceneColours[GT_TOD_MORNING].sky, (currentHour - 4) / (7 - 4)); } My original attempt to get this to work was to dynamically generate a material with the new colour and apply that material to the skydome. This, as you can probably guess... didn't go well. I know it's possible to use shaders where you can pass information such as colour to the shader from the code but I am unsure if there is an existing simple shader to change a colour like this or if I need to create one. What is involved in creating a shader and material definition that would allow me to change the colour of a material without the overheads of dynamically generating materials all the time? EDIT : I've created a glsl vertex and fragment shaders as follows. Vertex uniform vec4 newColor; void main() { gl_FrontColor = newColor; gl_Position = ftransform(); } Fragment void main() { gl_FragColor = gl_Color; } I can pass a colour to it using ShaderDesigner and it seems to work. I now need to investigate how to use it within Ogre as a material. EDIT : I created a material file like this : vertex_program colour_vs_test glsl { source test.vert default_params { param_named newColor float4 0.0 0.0 0.0 1 } } fragment_program colour_fs_glsl glsl { source test.frag } material Test/SkyColor { technique { pass { lighting off fragment_program_ref colour_fs_glsl { } vertex_program_ref colour_vs_test { } } } } In the code I have tried : Ogre::MaterialPtr material = Ogre::MaterialManager::getSingleton().getByName("Test/SkyColor"); Ogre::GpuProgramParametersSharedPtr params = material->getTechnique(0)->getPass(0)->getVertexProgramParameters(); params->setNamedConstant("newcolor", Ogre::Vector4(0.7, 0.5, 0.3, 1)); I've set that as the Skydome material which seems to work initially. I am doing the same with the code that is attempting to lerp between colours, but when I include it there, it all goes black. Seems like there is now a problem with my colour lerping.

    Read the article

  • HLSL Shader not working right?

    - by dvds414
    Okay so I have this shader for ambient occlusion. It loads to world correctly, but it just shows all the models as being white. I do not know why. I am just running the shader while the model is rendering, is that correct? or do I need to make a render target or something? if so then how? I'm using C++. Here is my shader. float sampleRadius; float distanceScale; float4x4 xProjection; float4x4 xView; float4x4 xWorld; float3 cornerFustrum; struct VS_OUTPUT { float4 pos : POSITION; float2 TexCoord : TEXCOORD0; float3 viewDirection : TEXCOORD1; }; VS_OUTPUT VertexShaderFunction( float4 Position : POSITION, float2 TexCoord : TEXCOORD0) { VS_OUTPUT Out = (VS_OUTPUT)0; float4 WorldPosition = mul(Position, xWorld); float4 ViewPosition = mul(WorldPosition, xView); Out.pos = mul(ViewPosition, xProjection); Position.xy = sign(Position.xy); Out.TexCoord = (float2(Position.x, -Position.y) + float2( 1.0f, 1.0f ) ) * 0.5f; float3 corner = float3(-cornerFustrum.x * Position.x, cornerFustrum.y * Position.y, cornerFustrum.z); Out.viewDirection = corner; return Out; } texture depthTexture; texture randomTexture; sampler2D depthSampler = sampler_state { Texture = <depthTexture>; ADDRESSU = CLAMP; ADDRESSV = CLAMP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; sampler2D RandNormal = sampler_state { Texture = <randomTexture>; ADDRESSU = WRAP; ADDRESSV = WRAP; MAGFILTER = LINEAR; MINFILTER = LINEAR; }; float4 PixelShaderFunction(VS_OUTPUT IN) : COLOR0 { float4 samples[16] = { float4(0.355512, -0.709318, -0.102371, 0.0 ), float4(0.534186, 0.71511, -0.115167, 0.0 ), float4(-0.87866, 0.157139, -0.115167, 0.0 ), float4(0.140679, -0.475516, -0.0639818, 0.0 ), float4(-0.0796121, 0.158842, -0.677075, 0.0 ), float4(-0.0759516, -0.101676, -0.483625, 0.0 ), float4(0.12493, -0.0223423, -0.483625, 0.0 ), float4(-0.0720074, 0.243395, -0.967251, 0.0 ), float4(-0.207641, 0.414286, 0.187755, 0.0 ), float4(-0.277332, -0.371262, 0.187755, 0.0 ), float4(0.63864, -0.114214, 0.262857, 0.0 ), float4(-0.184051, 0.622119, 0.262857, 0.0 ), float4(0.110007, -0.219486, 0.435574, 0.0 ), float4(0.235085, 0.314707, 0.696918, 0.0 ), float4(-0.290012, 0.0518654, 0.522688, 0.0 ), float4(0.0975089, -0.329594, 0.609803, 0.0 ) }; IN.TexCoord.x += 1.0/1600.0; IN.TexCoord.y += 1.0/1200.0; normalize (IN.viewDirection); float depth = tex2D(depthSampler, IN.TexCoord).a; float3 se = depth * IN.viewDirection; float3 randNormal = tex2D( RandNormal, IN.TexCoord * 200.0 ).rgb; float3 normal = tex2D(depthSampler, IN.TexCoord).rgb; float finalColor = 0.0f; for (int i = 0; i < 16; i++) { float3 ray = reflect(samples[i].xyz,randNormal) * sampleRadius; //if (dot(ray, normal) < 0) // ray += normal * sampleRadius; float4 sample = float4(se + ray, 1.0f); float4 ss = mul(sample, xProjection); float2 sampleTexCoord = 0.5f * ss.xy/ss.w + float2(0.5f, 0.5f); sampleTexCoord.x += 1.0/1600.0; sampleTexCoord.y += 1.0/1200.0; float sampleDepth = tex2D(depthSampler, sampleTexCoord).a; if (sampleDepth == 1.0) { finalColor ++; } else { float occlusion = distanceScale* max(sampleDepth - depth, 0.0f); finalColor += 1.0f / (1.0f + occlusion * occlusion * 0.1); } } return float4(finalColor/16, finalColor/16, finalColor/16, 1.0f); } technique SSAO { pass P0 { VertexShader = compile vs_3_0 VertexShaderFunction(); PixelShader = compile ps_3_0 PixelShaderFunction(); } }

    Read the article

  • How add fog with pixel shader (HLSL) XNA?

    - by Mehdi Bugnard
    I started to make a small game in XNA . And recently i tried to add a "fog" on "pixel shader HLSL" with the class Effect from XNA . I search online about some tutorial and found many sample. But nothing want work on my game :-( . Before i already add a "fog" effect in my game and everything work, because i used the class "BasicEffect" but with the class "Effect" and HLSL, it's really more complicated. If somebody have an idea, it's will be wonderfull. Thanks again. Here is my code HLSL, i use. // Both techniques share this same pixel shader. float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { //return tex2D(Sampler, input.TextureCoordinate) * input.Color; float d = length(input.TextureCoordinate - cameraPos); float l = saturate((d-fogNear)/(fogFar-fogNear)); float fogFactory = clamp((d - fogNear) / (fogFar - fogNear), 0, 1) * l; return tex2D(Sampler, input.TextureCoordinate) * lerp(input.Color, fogColor, fogFactory); } Here is the screenShot With effect Without effect

    Read the article

  • Need to combine a color, mask, and sprite layer in a shader

    - by Donutz
    My task: to display a sprite using different team colors. I have a sprte graphic, part of which has to be displayed as a team color. The color isn't 'flat', i.e. it shades from brighter to darker. I can't "pre-build" the graphics because there are just too many, so I have to generate them at runtime. I've decided to use a shader, and supply it with a texture consisting of the team color, a texture consisting of a mask (black=no color, white=full color, gray=progressively dimmed color), and the sprite grapic, with the areas where the team color shows being transparent. So here's my shader code: // Effect attempts to merge a color layer, a mask layer, and a sprite layer // to produce a complete sprite sampler UnitSampler : register(s0); // the unit sampler MaskSampler : register(s1); // the mask sampler ColorSampler : register(s2); // the color float4 main(float4 color : COLOR0, float2 texCoord : TEXCOORD0) : COLOR0 { float4 tex1 = tex2D(ColorSampler, texCoord); // get the color float4 tex2 = tex2D(MaskSampler, texCoord); // get the mask float4 tex3 = tex2D(UnitSampler,texCoord); // get the unit float4 tex4 = tex1 * tex2.r * tex3; // color * mask * unit return tex4; } My problem is the calculations involving tex1 through tex4. I don't really understand how the manipulations work, so I'm just thrashing around, producing lots of different incorrect effects. So given tex1 through tex3, what calcs do I do in order to take the color (tex1), mask it (tex2), and apply the result to the unit if it's not zero? And would I be better off to make the mask just on/off (white/black) and put the color shading in the unit graphic?

    Read the article

  • Cheap ways to do scaling ops in shader?

    - by Nick Wiggill
    I've got an extensive world terrain that uses vec3 for the vertex position attribute. That's good, because the terrain has endless gradations due to the use of floating point. But I'm thinking about how to reduce the amount of data uploaded to the GPU. For my terrain, which uses discrete / grid-based vertex positions in x and z, it's pretty clear that I can replace my vec3s (floats, really) with shorts, halving the per-vertex position attribute cost from 12 bytes each to 6 bytes. Considering I've got little enough other vertex data, and an enormous amount of terrain data to push into the world, it's a major gain. Currently in my code, one unit in GLSL shaders is equal to 1m in the world. I like that scale. If I move over to using shorts, though, I won't be able to use the same scale, as I would then have a very blocky world where every step in height is an entire metre. So I see these potential solutions to scale the positional data correctly once it arrives at the vertex shader stage: Use 10:1 scaling, i.e. 1 short unit = 1 decimetre in CPU-side code. Do a division by 10 in the vertex shader to scale incoming decimetre values back to metres. Arbirary (non-PoT) divisions tend to be slow, however. Use (some-power-of-two):1 scaling (eg. 8:1), which enables the use of a bitshift (eg. val >> 3) to do the division... not sure how performant this is in shaders, though. Not as intuitive to read values, but possibly quite a bit faster than div by a non-PoT value. Use a texture as lookup table. I've heard that this is really fast. Or whatever solutions others can offer to achieve the same results -- minimal vertex data with sensible scaling.

    Read the article

  • Modern Shader Book?

    - by Michael Stum
    I'm interested in learning about Shaders: What are they, when/for what would I use them, and how to use them. (Specifically I'm interested in Water and Bloom effects, but I know close to 0 about Shaders, so I need a general introduction). I saw a lot of books that are a couple of years old, so I don't know if they still apply. I'm targeting XNA 4.0 at the moment (which I believe means HLSL Shaders for Shader Model 4.0), but anything that generally targets DirectX 11 and OpenGL 4 is helpful I guess.

    Read the article

  • XNA Shader Texture Memory

    - by Alex
    I was wondering about texture optimization in XNA 4.0. Will the the contentmanager send the texturedata to the GPU directly when the texture gets loaded or do I send the texture data to the GPU when I declare a texture in my shader. If that's the case, what happens if I have 5 shaders all using the same texture, does that mean that I send 5 instances of that texture data to the gpu or am I simply telling the GPU what preloaded texture to use? Or does XNA do the heavy lifting in the background?

    Read the article

  • Wine shader model 3.0 not detected

    - by LillyPopper
    I am trying to run eve off the latest version of wine. It was running just fine yesterday, now I go to start it and it tells me that I need shader model version 3.0. I followed this guide here for setting up wine: http://www.unixmen.com/install-and-configure-wine-to-play-latest-windows-games-in-linux-ubuntu-linuxmint-fedora/ I used a shortcut with the following command: wine "/media/gibbo/Games/EVE/eve.exe" Now it just seems to not work...after it was before Any ideas?

    Read the article

  • OpenGL quake 3 shader file for objects (for trees)

    - by mlodziaszka
    I decided to add to my game few trees, I already quake 3 model loader (md3) its for characters and method for texture drawing is store in *.ini file. I found a package of trees in MD3 and I have no problem with loading model alone, but there is a *.shader file and i have no idea how to load it to draw texture properly. Tree pack: http://www.custommapmakers.org/wiki/index.php/Models:GR_Trees_set I do not have to use exactly this format, I can write another loader, but trees in *.obj or .3ds look even harder

    Read the article

  • Problems implementing a screen space shadow ray tracing shader

    - by Grieverheart
    Here I previously asked for the possibility of ray tracing shadows in screen space in a deferred shader. Several problems were pointed out. One of the most important problem is that only visible objects can cast shadows and objects between the camera and the shadow caster can interfere. Still I thought it'd be a fun experiment. The idea is to calculate the view coordinates of pixels and cast a ray to the light. The ray is then traced pixel by pixel to the light and its depth is compared with the depth at the pixel. If a pixel is in front of the ray, a shadow is casted at the original pixel. At first I thought that I could use the DDA algorithm in 2D to calculate the distance 't' (in p = o + t d, where o origin, d direction) to the next pixel and use it in the 3D ray equation to find the ray's z coordinate at that pixel's position. For the 2D ray, I would use the projected and biased 3D ray direction and origin. The idea was that 't' would be the same in both 2D and 3D equations. Unfortunately, this is not the case since the projection matrix is 4D. Thus, some tweak needs to be done to make this work this way. I would like to ask if someone knows of a way to do what I described above, i.e. from a 2D ray in texture coordinate space to get the 3D ray in screen space. I did implement a simple version of the idea which you can see in the following video: video here Shadows may seem a bit pixelated, but that's mostly because of the size of the step in 't' I chose. And here is the shader: #version 330 core uniform sampler2D DepthMap; uniform vec2 projAB; uniform mat4 projectionMatrix; const vec3 light_p = vec3(-30.0, 30.0, -10.0); noperspective in vec2 pass_TexCoord; smooth in vec3 viewRay; layout(location = 0) out float out_AO; vec3 CalcPosition(void){ float depth = texture(DepthMap, pass_TexCoord).r; float linearDepth = projAB.y / (depth - projAB.x); vec3 ray = normalize(viewRay); ray = ray / ray.z; return linearDepth * ray; } void main(void){ vec3 origin = CalcPosition(); if(origin.z < -60) discard; vec2 pixOrigin = pass_TexCoord; //tex coords vec3 dir = normalize(light_p - origin); vec2 texel_size = vec2(1.0 / 600.0); float t = 0.1; ivec2 pixIndex = ivec2(pixOrigin / texel_size); out_AO = 1.0; while(true){ vec3 ray = origin + t * dir; vec4 temp = projectionMatrix * vec4(ray, 1.0); vec2 texCoord = (temp.xy / temp.w) * 0.5 + 0.5; ivec2 newIndex = ivec2(texCoord / texel_size); if(newIndex != pixIndex){ float depth = texture(DepthMap, texCoord).r; float linearDepth = projAB.y / (depth - projAB.x); if(linearDepth > ray.z + 0.1){ out_AO = 0.2; break; } pixIndex = newIndex; } t += 0.5; if(texCoord.x < 0 || texCoord.x > 1.0 || texCoord.y < 0 || texCoord.y > 1.0) break; } } As you can see, here I just increment 't' by some arbitrary factor, calculate the 3D ray and project it to get the pixel coordinates, which is not really optimal. Hopefully, I would like to optimize the code as much as possible and compare it with shadow mapping and how it scales with the number of lights. PS: Keep in mind that I reconstruct position from depth by interpolating rays through a full screen quad.

    Read the article

  • assigning values to shader parameters in the XNA content pipeline

    - by Nick
    I have tried creating a simple content processor that assigns the custom effect I created to models instead of the default BasicEffect. [ContentProcessor(DisplayName = "Shadow Mapping Model")] public class ShadowMappingModelProcessor : ModelProcessor { protected override MaterialContent ConvertMaterial(MaterialContent material, ContentProcessorContext context) { EffectMaterialContent shadowMappingMaterial = new EffectMaterialContent(); shadowMappingMaterial.Effect = new ExternalReference<EffectContent>("Effects/MultipassShadowMapping.fx"); return context.Convert<MaterialContent, MaterialContent>(shadowMappingMaterial, typeof(MaterialProcessor).Name); } } This works, but when I go to draw a model in a game, the effect has no material properties assigned. How would I go about assigning, say, my DiffuseColor or SpecularColor shader parameter to white or (better) can I assign it to some value specified by the artist in the model? (I think this may have something to do with the OpaqueDataDictionary but I am confused on how to use it--the content pipeline has always been a black box to me.)

    Read the article

  • Shader inputs in a general purpose engine

    - by dreta
    I'm not familiar with SDKs like Unity or UDK that much, so i can't check this offhand. Do general purpose engines allow users to create custom uniform variables? The way i see it, and the way i have implemented it in an engine i'm writing to learn 3D, is that there is a "set" of uniforms provided by the engine and if you want to write a custom shader then you utilize uniforms you need to create a wanted effect. Now, the thing is, first of all i'm not an artist, second of all, i didn't have a chance to create complex scenes yet. So my question is, is it common practice to define variables that the engine provides and only allow the user to work with what they're given? Allowing users to add custom programs and use them where they want is not hard, but i have issues imagining how you'd go about doing the same for uniforms.

    Read the article

  • HLSL Pixel Shader that does palette swap

    - by derrace
    I have implemented a simple pixel shader which can replace a particular colour in a sprite with another colour. It looks something like this: sampler input : register(s0); float4 PixelShaderFunction(float2 coords: TEXCOORD0) : COLOR0 { float4 colour = tex2D(input, coords); if(colour.r == sourceColours[0].r && colour.g == sourceColours[0].g && colour.b == sourceColours[0].b) return targetColours[0]; return colour; } What I would like to do is have the function take in 2 textures, a default table, and a lookup table (both same dimensions). Grab the current pixel, and find the location XY (coords) of the matching RGB in the default table, and then substitute it with the colour found in the lookup table at XY. I have figured how to pass the Textures from C# into the function, but I am not sure how to find the coords in the default table by matching the colour. Could someone kindly assist? Thanks in advance.

    Read the article

  • Low complexity shader to indicate the sides of a polyline

    - by Pris
    I have a bunch of polylines that I draw using GL_LINES. They can have thousands of points. They actually represent the separation of land and water on a map. I don't have complete polygons, just the ordered set of points. I'm looking for a neat but efficient way to visually convey Side A and Side B as being different. For example I could offset the polyline in one direction a few times and fade it out (but every offset is doubling the number of points), or offset it once to make a "ribbon" and give one side a 'glow' like effect to mimic the outer glow or shadow of a polygon). This is for a mobile application and I'm using OpenGL ES 2. I'd like to keep the effect as simple as possible from a complexity stand point. I'm looking for some additional ideas; maybe there's a clever shader technique out there or a visual effect I haven't considered.

    Read the article

  • DX11 - Weird shader behavior with and without branching

    - by Martin Perry
    I have found problem in my shader code, which I dont´t know how to solve. I want to rewrite this code without "ifs" tmp = evaluate and result is 0 or 1 (nothing else) if (tmp == 1) val = X1; if (tmp == 0) val = X2; I rewite it this way, but this piece of code doesn ´t word correctly tmp = evaluate and result is 0 or 1 (nothing else) val = tmp * X1 val = !tmp * X2 However if I change it to: tmp = evaluate and result is 0 or 1 (nothing else) val = tmp * X1 if (!tmp) val = !tmp * X2 It works fine... but it is useless because of "if", which need to be eliminated I honestly don´t understand it Posted Image . I tried compilation with NO and FULL optimalization, result is same

    Read the article

  • Shader inputs in a general purpouse engine

    - by dreta
    I'm not familiar with SDKs like Unity or UDK that much, so i can't check this off hand. Do general purpouse engines allow users to create custom uniform variables? The way i see it, and the way i have implemented it in an engine i'm writing to learn 3D, is that there is a "set" of uniforms provided by the engine and if you want to write a custom shader then you utilize uniforms you need to create a wanted effect. Now, the thing is, first of all i'm not an artist, second of all, i didn't have a chance to create complex scenes yet. So my question is, is it common practice to define variables that the engine provides and only allow the user to work with what they're given? Allowing users to add custom programs and use them where they want is not hard, but i have issues imagining how you'd go about doing the same for uniforms.

    Read the article

  • fragment shader directional light positioning with camera

    - by meWantToLearn
    Im trying to set up directional lighting in the fragment shader. So the direction of my light moves with the camera position. #version 150 core uniform sampler2D diffuseTex; uniform vec4 lightColour; uniform vec3 lightDirection; vec3 LNorm = normalize(lightDirection); vec3 normal = normalize(IN.normal); vec3 calColour = lightColour[i].rgb * intensity; gl_FragColor = vec4(diffuse.rbg * calColour, diffuse.a); It lights the entire scene.

    Read the article

  • Some help understanding and modifying a 2D shader

    - by electroflame
    I have a similar question as the one posed here, except that I don't wish to use a 1D Color Palette. I simply wish to have it display 1 color of my choosing (red, for example). I plan to use this as a "shield" effect for a 2D ship. I also wish to understand how it works a little bit better, as I'll be the first to admit that shaders in general are not my strongest suit. I'm not asking for an overview of HLSL (as that is too broad of a subject), just an explanation of how this shader works, and the best way to implement it in a 2D game. Code examples would be ideal (even if they are theoretical) but if the answer is explained well enough, I might be able to manage with plain old text. This is also in XNA 4.0. Thanks in advance.

    Read the article

  • Shader Model 3.0 not available

    - by Romy
    I have Acer 4745G with ATI HD 5650 1GB VRAM. After I installed the COD Black Ops trough Wine Playonlinux and successfully installed, and I play the game and then appear message "Shader Model 3.0 not available". I have installed ATI driver 11.8 when I trying this game. And then I'm trying to install the driver from menu "System Administration Additional Driver, it doesn't work. I cannot log in, in the screen appear only the text for log in. And then I uninstall it trough recovery mode. And then I download ATI driver 11.11 from official ATI/AMD website, and then I restart my computer and my screen appearing only text again. I'm using Ubuntu (Ultimate Edition) 11.04. How to overcome this problem?

    Read the article

  • Writing a basic shader for large input files

    - by Zoltan Varadi
    I started writing a shader for my iOS app and instead of starting from scratch i used this tutorial here: http://www.raywenderlich.com/3664/opengl-es-2-0-for-iphone-tutorial I wrote an import function, first to import wavefront .obj models. My problem is that with I can't handle larger inputs (with a simple cube it was working). I realized that the indices array is an array of GLubyte values, which is unsigned char, so as a result i cant have more than 256 indexes. I modified it to GLuint, but then only get a blank screen. What else needs to me modified? p.s.: the source can be downloaded from here: http://d1xzuxjlafny7l.cloudfront.net/downloads/HelloOpenGL.zip

    Read the article

  • Why is a fully transparent pixel still rendered?

    - by Mr Bell
    I am trying to make a pixel shader that achieves an effect similar to this video http://www.youtube.com/watch?v=f1uZvurrhig&feature=related My basic idea is render the scene to a temp render target then Render the previously rendered image with a slight fade on to another temp render target Draw the current scene on top of that Draw the results on to a render target that persists between draws Draw the results on to the screen But I am having problems with the fading portion. If I have my pixel shader return a color with its A component set to 0, shouldn't that basically amount to drawing nothing? (Assuming that sprite batch blend mode is set to AlphaBlend) To test this I have my pixel shader return a transparent red color. Instead of nothing being drawn, it draws a partially transparent red box. I hope that my question makes sense, but if it doesnt please ask me to clarify Here is the drawing code public override void Draw(GameTime gameTime) { GraphicsDevice.SamplerStates[1] = SamplerState.PointWrap; drawImageOnClearedRenderTarget(presentationTarget, tempRenderTarget, fadeEffect); drawImageOnRenderTarget(sceneRenderTarget, tempRenderTarget); drawImageOnClearedRenderTarget(tempRenderTarget, presentationTarget); GraphicsDevice.SetRenderTarget(null); drawImage(backgroundTexture); drawImage(presentationTarget); base.Draw(gameTime); } private void drawImage(Texture2D image, Effect effect = null) { spriteBatch.Begin(0, BlendState.AlphaBlend, SamplerState.PointWrap, null, null, effect); spriteBatch.Draw(image, new Rectangle(0, 0, width, height), Color.White); spriteBatch.End(); } private void drawImageOnRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); drawImage(image, effect); } private void drawImageOnClearedRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); GraphicsDevice.Clear(Color.Transparent); drawImage(image, effect); } Here is the fade pixel shader sampler TextureSampler : register(s0); float4 PixelShaderFunction(float2 texCoord : TEXCOORD0) : COLOR0 { float4 c = 0; c = tex2D(TextureSampler, texCoord); //c.a = clamp(c.a - 0.05, 0, 1); c.r = 1; c.g = 0; c.b = 0; c.a = 0; return c; } technique Fade { pass Pass1 { PixelShader = compile ps_2_0 PixelShaderFunction(); } }

    Read the article

  • Doubt about texture waves in CG Ocean Shader

    - by Alexandre
    I'm new on graphical programming, and I'm having some trouble understanding the Ocean Shader described on "Effective Water Simulation from Physical Models" from GPU Gems. The source code associated to this article is here. My problem has been to understand the concept of texture waves. First of all, what is achieved by texture waves? I'm having a hard time trying to figure out it's usefulness. In the section 1.2.4 of the article, it does say that the waves summed into the texture have the same parametrization as the waves used for vertex positioning. Does it mean that I can't use the texture provided by the source code if I change the parameters of the waves, or add more waves to sum? And in the section 1.4.1, is said that we can assume that there is no rotation between texture space and world space if the texture coordinates for our normal map are implicit. What does mean that the "normal map are implicit'? And why do I need a rotation between texture and world spaces if the normal map are not implicit? I would be very grateful for any help on this.

    Read the article

  • OpenGL ES Shader help (Blending)

    - by Chris
    Earlier I required assistance getting to grips with how to retain the alpha channel of a transparent texture in my colourised texture shader program. Whilst playing with that first version of my program (before obtaining the solution to my first requirement), I managed to enable transparency for the whole texture (effectively blending via GLSL), and I quite liked this, and I would now like to know if and how it is possible to retain this blending effect, on top of the existing output without affecting the original alpha channel - as I don't know how to input this transparency via the parameter that is already being provided with the textures alpha channel. A basic example of the blending program I am referring to (minus any other functionality) is as follows... varying vec2 texCoord; uniform sampler2D texSampler; void main() { gl_FragColor = vec4(texture2D(texSampler,texCoord).xyz,0.5); } Where 0.5 is the transparency (blending effect) of the whole texture. This is the current version of my program, which provides the ability to colour a texture according the colour parameter passed to the program, and retains the alpha channel of the original texture. varying vec2 texCoord; uniform sampler2D texSampler; uniform vec3 colour; void main() { gl_FragColor = vec4(colour,1) * vec4(texture2D(texSampler,texCoord).xyz,texture2D(texSampler,texCoord).w); } I need to know if it is possible to apply transparency on top this program, without affecting the original alpha channel which I have already preserved. I hope this makes enough sense, I am sure it is possible, and if so I should imagine it is rather simple, but this has me stumped. Any help much appreachiated. Cheers, Chris

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >