Search Results

Search found 2774 results on 111 pages for 'adapter'.

Page 50/111 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• How can a CentOS 6 guest running in VirtualBox be configured as a LAMP server that can be accessed from the Windows host?

  - by jtt89

  I was able to conect Centos6 on Virtual Box to Windows (I can ping in both directions) with Host-only Adapter (for connection between the two) and NAT Adapter (to enable Linux on VB to connect to the Internet). I want to set up httpd, mysql and vsftpd servers and in the end easily connect to httpd from Windows based browser and ftp server with a Windows based client as well. I would also want to have access through SSH. I have a general idea of the steps that are involved, but there is also a configuration that I am not sure about at this point. Lets say I follow these steps: yum install httpd yum install php php-pear php-mysql yum install mysql-server mysql_secure_installation yum install vsftpd yum install mod_ssl Technically I have everything installed, but what would be the next steps that I need to take (from the networking point of view, so to speak) to get it all working)? I know I need to configure, at least Apache, and ftp server, but I am not sure how is it gonna work; like where am I gonna be uloading the sites (I know this can vary), how am I gonna know what address to use in a browser if I wanna go to a website x, y, z on that installation etc. This sounds like I need to do some kind of DNS setup and I am kind of stuck at this point. If somebody could give me a general outline of what are the things that need to be done that would be great (I was looking at a lot of websites and I know about etc/sysconfig/network, httpd.config - not too much about it on Apache's site, hostname, hostname -f etc; but it is kind of hard to piece it all together at this point). I am gonna be looking at the books also, but they not always reflect the setup that I have too (VirtualBox). Thank you.

  Read the article

• Toshiba Qosmio: Battery Stuck at 60%, does not Charges, PC can't power up, can't remain on with out

  - by Fellknight

  Just like the tittle says, now let me try to give some more detail about the symptoms; The battery is stuck at 60 percent (68% at the moment of this writing).When hovering over the battery icon in Windows 7 Home Premium x64 it reads:"68% available (plugged in, charging)", there's no x or any sing the OS is displaying any error. No matter how much time left connected to the AC adapter the battery doesn't charge, it seems however it continues to discharge at its normal rate when disconnected from the laptop (about 1% each 2 weeks). Now this last symptom is the one i find most strange it "seems" the laptop somehow isn't recognizing the battery because even with the remaining charge of 60%(ish) the laptop wont power up or remain on if disconnected from its AC adapter(if it's on and is unplugged it will immediately turn off). Meaning that even with the battery attached correctly in its right place is as if running the laptop with no battery at all. Toshiba's Utilities haven't detected anything strange (or anything for that matter) with the battery or the hardware. The laptop when in use is connected 90% of the time to a Belkin surge protector (like my 1TB EHD). The protector is working correctly (green light on) and the 1TB HD too, thus a power surge having damaged it's very unlikely. Thnx in advance

  Read the article

• IPv4 not enabled in Windows 7

  - by RidDeBakTiYar

  I have a Netbook with Win 7 Starter edition. I am not able to get IPv4 enabled/installed in the Netbook and hence not able to network/connect to Internet. It says "Limited access" when I check connections. It all began when my system crashed and I was not able to get thro beyond the boot screen. The system advice me to try repair with the original OS cd and I did the same. After that the Netbook has booted, but is not able to network. On a detailed study I found that the Network adapter has both IPv4 and IPv6 Protocols, but there are some differences. The IPv4 is not having the "Properties" enabled to configure, while the IPv6 is having "Properties" enabled. I have only a IPv4 Wired and Wireless at home and its not able to get the Netbook connected as it cannot I had tried uninstalling the Adapter to allow windows to automatically detect and install. Using the "netsh" command to uninstall and install, but not having any change in status. There is a option to "Have disk" under add Protocol, but I don't know how to give the standard IPv4 for installation (asking for *.inf). Any help in solving the issue will be very much appreciated

  Read the article

• Connect bluetooth headphones both to PC and phone at the same time

  - by Sergiy Byelozyorov

  I have recently bought Philips SHB6110. Extract from the 13th page of manual: Therefore you can connect your Bluetooth stereo headset. with a Bluetooth stereo enabled phone to both listen to music and lead calls, or with a Bluetooth phone that does not support Bluetooth stereo (A2DP) to lead calls and at the same time to a Bluetooth audio device (Bluetooth enabled MP3 player, Bluetooth audio adapter etc.) to listen to music. Make sure to pair the phone first with your Bluetooth headset, then turn both the phone and headset off to then pair the Bluetooth audio device. With the SwitchStream feature you can listen to music and monitor your calls at the same time. Even while listening to music, you will hear a ring tone when receiving a call and can switch to the call simply by tapping the button. The manual however doesn't specify how do I connect to both device at the same time. I use Toshiba Satellite Pro P300-1CG laptop with Belkin Mini Bluetooth Adapter and Nokia N95 phone. Operating system is Windows 7 64-bit and I have Skype installed. Both phone and compute can be used for listening to music and talking on the phone (on PC via Skype). Best solution would be if I could connect to PC and phone as the same time and monitor calls both mobile and Skype calls while listening music from Winamp. If that is not possible, then I would like at least to be able to listen music from PC, while monitoring calls from mobile. So, please tell me how do I connect both PC and phone to headphones?

  Read the article

• IDE/PATA high-speed hard drive dock

  - by wfaulk

  I frequently need to access bare drives for backups and need a quick, high-speed way to deal with them. There are a multitude of SATA hard drive docks (for example), but I have a lot of IDE/PATA (hereafter "IDE") drives that I would like to be able to use similarly. There are IDE-to-SATA adapters so you can plug your IDE hard drive into a SATA port, so I don't see any reason why you couldn't use the same technology to have a native dock, yet none seems to exist. Now, I'm aware that 3.5" IDE drives do not have a specification for the layout of the connector, and therefore can't be slapped into a dock the same way a SATA drive could, but 2.5" PATA drives do. In fact, I'm not terribly interested in supporting 3.5" drives. It would be nice, but I deal with them far less frequently than 2.5" drives. Also, I'd very much like for the connection to the computer be faster than USB, preferably eSATA, I don't want to be spending time mounting a drive inside an enclosure, I don't want bare drives lying around with a cable hanging off of them, and I'd prefer a single dock rather than two. What seems like the ideal solution to me would be a regular SATA→eSATA dock and some sort of screwless adapter for IDE drives, but I'm open to any suggestions, regardless of my stated preferences, but which are, in some sort of order of preference: high-speed (faster than USB, at least) holder for drive (not just a cable) no complicated enclosure support for 3.5" IDE drives single dock Updates: Here's a 3.5" IDE to 3.5" SATA docking adapter that could be part of the solution. Weird. I figured that would be the impossible part. I was hoping to find something like this 2.5" to 3.5" SATA chassis that would take a 44-pin IDE drive internally. It looks like the Vantec EZ Swap EX comes awfully close. It has its own bay dock, but it looks like the SATA ports on the back are spaced properly, even if they're not aligned quite properly. Unfortunately, the proper position is at the very edge of the drive, which means that the docks' connectors are at the very edge of their recesses, which means there's no way to fit it in there.

  Read the article

• jboss 5.1 mysql connection pooling

  - by boyd4715

  I am using JBOSS 5.1.0.GA, MySQL 5.5 and Hibernate 3.3.1 GA (included with JBOSS) + Spring. My question is do I need to add c3p0 as a data source in my spring/hibernate configuration for connection pooling or are the setting in the JBOSS mysql-ds.xml setting enough. My mysql-ds.xml is the following: <datasources> <local-tx-datasource> <jndi-name>MySqlDS</jndi-name> <connection-url>jdbc:mysql://localhost:3306/ecotrak</connection-url> <driver-class>com.mysql.jdbc.Driver</driver-class> <user-name>ecotrak</user-name> <password>ecotrak</password> <min-pool-size>5</min-pool-size> <max-pool-size>20</max-pool-size> <idle-timeout-minutes>5</idle-timeout-minutes> <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name> <!-- should only be used on drivers after 3.22.1 with "ping" support --> <valid-connection-checker-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLValidConnectionChecker</valid-connection-checker-class-name> <!-- sql to call when connection is created <new-connection-sql>some arbitrary sql</new-connection-sql> --> <!-- sql to call on an existing pooled connection when it is obtained from pool - MySQLValidConnectionChecker is preferred for newer drivers <check-valid-connection-sql>some arbitrary sql</check-valid-connection-sql> --> <!-- corresponding type-mapping in the standardjbosscmp-jdbc.xml (optional) --> <metadata> <type-mapping>mySQL</type-mapping> </metadata> </local-tx-datasource> </datasources>

  Read the article

• Why would Windows use slower network interface despite route metrics?

  - by tim11g

  On my previous notebook, the Dell/Broadcom wireless adapter had an option to automatically disable wireless when a wired network is connected, so I never dealt with multiple active interfaces. My current system has an Intel wireless adapter, and they apparently haven't figured out how to turn it off when there is a wired connection. Unless I explicitly remember to disable wireless when docked, the connection is active. That shouldn't be a problem (in theory), since the route metric will cause traffic to go over the fastest network (as indicated by the lowest metric in the routing table). Apparently not - I'm running a backup and seeing the throughput at 25Mbps or so (which is consistent with 802.11g) when a perfectly good Gigabit Ethernet interface is also connected. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.104 10 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.109 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 Windows has correctly identified the Ethernet interface (.104) and assigned it the lower (preferred) metric. So the Ethernet interface should be used exclusively, right? Why is the Ethernet connection not being used? What other factors are involved? (This is with Windows 7 if it makes a difference)

  Read the article

• Monitor connected with WiDi just shows a black screen

  - by Pops

  I have a Dell XPS 18 and want to use an external monitor with it. The monitor has VGA and DVI-D inputs. The XPS 18 has no video output ports, but it does support Intel WiDi. I have a Netgear P2TV2000 WiDi receiver, but it only has composite and HDMI outputs. I'm connecting the receiver to the monitor with an HDMI cable and an HDMI/DVI-D adapter. So, in short, the video path is: Computer → WiDi → WiDi receiver → HDMI cable → HDMI/DVI-D adapter → Monitor After setting all this up, I can't get anything to display on the monitor. At the moment I power the monitor on, I can see my desktop for a brief fraction of a second, and then everything goes black. All of the relevant drivers have been updated to the latest versions. When I use a different WiDi-enabled computer to connect to the same monitor, everything works fine. When I use the original computer and receiver to connect to a TV, everything works fine. It's only when I connect the original computer to the monitor I want to use that the connection fails. What could be going wrong here, and how can I get the video to work consistently?

  Read the article

• DNS Does Not Register at Off-site Locations

  - by Russ Warren

  First of all, let me give you the specifics of our setup: Windows Small Business Server 2008 Domain w/ all applicable updates on the DC The DC does DHCP for the main site The DC does DNS for all sites 3 sites including our headquarters where the DC is located All sites are connected through OpenVPN SSL tunnels terminated by an Untangle box at each site The 2 remote sites us the Untangle box as a DHCP server for their subnet, which assigns the DC as the primary DNS server Collection of Windows XP and Windows 7 workstations connected to the domain Here's the issue: All of the workstations at the main site register with the DNS server on the domain controller fine. As they grab an IP from the DHCP server, it updates the DNS server with the new host record. I have 2 systems (each at different remote sites) that fail to register with the DNS server. I've attempted the following troubleshooting steps: Confirmed the network adapter is using the DC as a DNS server Confirmed 2-way traffic is possible between DC and workstation Verified the "Register with DNS server" setting was checked in the adapter properties Attempted ipconfig /registerdns and received no errors For the time being, I have setup a DHCP reservation for these systems and manually created a host record. This seems to work fine, but I need a solution for any new systems that go out there.

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

  Read the article

• Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

  - by theonlylos

  For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

  Read the article

• How to use Python to read the physical address(MAC ID) [closed]

  - by getjoefree

  I want to read the physical address of the NIC model, i can get the results that i want to with SED.EXE before, but SED.EXE does not support my environment but Python ok, who have the means to do it. The general situation (not plug the network cable, it is impossible to obtain IP address): Ethernet adapter: Connection-specific DNS Suffix.: Chianet Description ...........: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller Physical Address .........: A4-BA-DB-9D-1E-8E Dhcp Enabled ...........: Yes Autoconfiguration Enabled ....: Yes Ethernet adapter 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-Card Physical Address. . . . . . . . . : 00-23-4D-D9-C0-28 The description of the NIC different, we can use this to fetch the corresponding physical address, base on Physical Address does not work, because the computer with the WLAN Card, I want to use Python to read my computer the card information and after Python handles an output file, output file format: SET MAC = A4BADB9D1E8E and sed format: ipconfig -all|sed -nrf getmac.sed | sed -e "s/-//g" > WINMAC.BAT getmac.sed: /Marvell Yukon 88E8040/ { n; s/.*: ([-0-9A-F]+)/set winmac=\1/p; }

  Read the article

• Lenvo B450 won't boot on battery only?

  - by Mywiki Witwiki

  We bought a Lenovo B450 laptop almost a year ago. It comes with a NVIDIA GEFORCE with CUDA graphics and so the battery life is terrible. It will only last 1:30 hours max. We try to run it on battery as much as possible but because the battery life is short sometimes we can't notice that the battery is so low until the computer blacks out. Because of the short battery life, the laptop is always plugged on AC power. One night the computer froze. Because it was already late, I just reset the laptop my pressing the power button for 10 seconds. The laptop shut off but I did not bother restarting it. The next morning, the laptop won't turn on on battery only. It will only turn on on AC power. The computer instantly shuts down(improperly) once the adapter is removed. But the battery was at 100% then. Now it is slowly losing charge (currently at 74%). The battery indicator says, "Plugged in, not charging". I want to bring the laptop to school but I can't because it won't be portable at all. Just to summarize it all: 1) The laptop suffered some blackouts already. 2) The laptop was on AC power most of the time. 3) When the computer froze, it was reset (hard shutdown). 4) The laptop won't boot with battery only since then. 5) The laptop will shutdown instantly when AC adapter is removed. 6) The battery won't charge and is gradually losing charge. ======================= UPDATE ============================= We got the battery replaced. Unfortunately, it delivers only 2 hours max of power.

  Read the article

• Disable write-protection on Micro SD

  - by Tim

  My task today is to open up and copy some files to 700 brand new micro SD cards. As I get going on this task I am finding that some of the Micro SD cards are telling me "sorry this drive is write protected" To copy the files I am using a standard SD to micro SD card adapter, and a USB SD card reader / writer. I have ensured that the switch is set to OFF on all of my adapters. As soon as I get a Micro SD that tells me it is write protected I can use the same adapter with another micro SD and it works fine, so I know the problem is not with my adapters. My question is: How can I disable the write protection on a Micro SD card? This eHow article seems to indicate that there is also a physical switch on Micro SD cards. However I have personally never seen a Micro SD with a physical switch, and none of the ones I am using today have said switch. Since these cards are brand new and thus empty are the ones that are telling me they are write protected simply useless? Could this be caused by some sort of defect in the cards?

  Read the article

• A fatal exception 0E occured at 0028:xxxxxx in VxD IOS(01)

  - by winlin

  I get a blue screen of death in my windows 98 machine every time I boot it. I can't reach to my desktop. The error is like this: A fatal exception 0E occured at 0028:C003CC2F in VxD IOS(01) + 0000156B This was called from 0028:C0082E60 in VxD VKD(01) + 000001D0 I have to then give it a three finger salute to restart the system. There is no other way to shut down the system at this point except pressing the CPU power button. What could be the problem? My windows system.ini is: [boot] oemfonts.fon=vgaoem.fon shell=Explorer.exe system.drv=system.drv drivers=mmsystem.dll power.drv user.exe=user.exe gdi.exe=gdi.exe sound.drv=mmsound.drv dibeng.drv=dibeng.dll comm.drv=comm.drv mouse.drv=mouse.drv keyboard.drv=keyboard.drv *DisplayFallback=0 fonts.fon=vgasys.fon fixedfon.fon=vgafix.fon 386Grabber=vgafull.3gr display.drv=pnpdrvr.drv [keyboard] keyboard.dll= oemansi.bin= subtype= type=4 [boot.description] system.drv=Standard PC mouse.drv=Standard mouse keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard aspect=100,96,96 display.drv=Standard PCI Graphics Adapter (VGA) [386Enh] ;device=tddebug.386 ;device=D:\TC\TASM\BIN\WINDPMI.386 ebios=*ebios woafont=dosapp.fon mouse=*vmouse, msmouse.vxd device=*dynapage device=*vcd device=*vpd device=*int13 keyboard=*vkd display=*vdd,*vflatd ConservativeSwapfileUsage=0 Paging=on [NonWindowsApp] TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22 [power.drv] [drivers] wavemapper=*.drv MSACM.imaadpcm=*.acm ;msvideo.STV680=STV680sg.drv midi=mmsystem.dll wave=mmsystem.dll MSACM.msadpcm=*.acm [iccvid.drv] [mciseq.drv] [mci] cdaudio=mcicda.drv sequencer=mciseq.drv waveaudio=mciwave.drv avivideo=mciavi.drv videodisc=mcipionr.drv vcr=mcivisca.drv MPEGVideo=mciqtz.drv MPEGVideo2=mciqtz.drv [vcache] [MSNP32] [DISPLAY] BusThrottle=1 [network] SSID=1438661605 [vicax] msacm711=74603 msacm811=148933 msacm911=42405 [Sessew] VideoManufacturer=Standard VGA VideoBoard=Standard Display Adapter (VGA) MouseType=0 VidType=0 Mono=0 Ddraw=1 [drivers32] msacm.lhacm=lhacm.acm VIDC.IV50=ir50_32.dll msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX VIDC.YUY2=msyuv.dll VIDC.UYVY=msyuv.dll VIDC.YVYU=msyuv.dll msacm.msaudio1=msaud32.acm msacm.vorbis=vorbis.acm msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM msacm.sl_anet=sl_anet.acm VIDC.TSCC=tsccvid.dll VIDC.IV41=IR41_32.AX vidc.mpg4=mpg4c32.dll vidc.mp43=mpg4c32.dll msacm.voxacm160=vct3216.acm MSACM.msadpcm=msadp32.acm [TTFontDimenCache] 0 4=2 4 0 5=3 5 0 6=4 6 0 7=4 7 0 8=5 8 0 9=5 9 0 10=6 10 0 11=7 11 0 12=7 12 0 13=8 13 0 14=8 14 0 15=9 15 0 16=10 16 0 18=11 18 0 20=12 20 0 22=13 22

  Read the article

• Config Apache HTTP Server for Eclipse

  - by hqt

  Maybe this question is silly but I really don't know how to solve. First, as other server, I want to define new server. So, in Eclipse, I go to: WindowsPreferenceServer: 1) When I add new server, in list, no category for apache HTTP server. Just has apache tomcat. So, I click into download additional server adapter--still don't have in list. 2) So, I search. I point to location I have installed. Good, Eclipse sees that is a HTTP Server. And Eclipse see folder to put project into for me (because I use LAMPP so that folder isn't in Apache folder). But here is my problem. When I want to run a new PHP Project. Right click, run on server. A new dialog appear take me to choose which server to run. And, in list of server, no HTTP Server, So, I don't know how to choose Apache HTTP Server !!! (because Eclipse doesn't see which server that I have defined, eclipse just find adapter first) So, if I want to run this project, I must copy all and paste to apache folder. Too handy !!! Please help me. Thanks :)

  Read the article

• Intel D2500HN Atom D2500 Doesn't turn on

  - by David W

  I recently bought parts from Amazon to build an embedded PC, and have assembled everything. I have: Intel D2500HN Mini-ITX Motherboard Mini-Box Pico-PSU 80 M350 Universal Min-ITX Enclosure 2GB DDR3 Memory Kinamax AD-LCD12 LCD Monitors 12V 6A 72W AC Adapter Power Supply The motherboard gets a light (on the motherboard, not on the Pico-PSU) when I plug it into the power adapter. Furthermore, I see the power switch light come on when I press the power button. However, the display doesn't turn on, and it doesn't seem that the PC is actually turned on. Since I'm seeing these lights, I know that the motherboard is getting power. Furthermore, the display VGA port is embedded into the motherboard, so that's not the issue. I'm just trying to figure out what COULD be the issue aside from a faulty motherboard. I have a diagram of the D2500HN motherboard which labels everything, and have ensured that the power LED as well as the On/Off cables are plugged into the right spots, although to be sure I've tried flipping these two cables around, and also plugging 1 cable into the other cable's spot & vice-versa. Is there anything else you folks think I may be missing, or anything else I can do to try to troubleshoot this issue before sending the motherboard back?

  Read the article

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• VMware Server Host-Only Network Routing

  - by Chris

  I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

  Read the article

• Driver issue for 7850 HD Diamond Windows 7

  - by Mr.Student

  I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

  Read the article

• How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

  - by Paul Hale

  I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• Abysmal transfer speeds on gigabit network

  - by Vegard Larsen

  I am having trouble getting my Gigabit network to work properly between my desktop computer and my Windows Home Server. When copying files to my server (connected through my switch), I am seeing file transfer speeds of below 10MB/s, sometimes even below 1MB/s. The machine configurations are: Desktop Intel Core 2 Quad Q6600 Windows 7 Ultimate x64 2x WD Green 1TB drives in striped RAID 4GB RAM AB9 QuadGT motherboard Realtek RTL8810SC network adapter Windows Home Server AMD Athlon 64 X2 4GB RAM 6x WD Green 1,5TB drives in storage pool Gigabyte GA-MA78GM-S2H motherboard Realtek 8111C network adapter Switch dLink Green DGS-1008D 8-port Both machines report being connected at 1Gbps. The switch lights up with green lights for those two ports, indicating 1Gbps. When connecting the machines through the switch, I am seeing insanely low speeds from WHS to the desktop measured with iperf: 10Kbits/sec (WHS is running iperf -c, desktop is iperf -s). Using iperf the other way (WHS is iperf -s, desktop iperf -c) speeds are also bad (~20Mbits/sec). Connecting the machines directly with a patch cable, I see much higher speeds when connecting from desktop to WHS (~300 Mbits/sec), but still around 10Kbits/sec when connecting from WHS to the desktop. File transfer speeds are also much quicker (both directions). Log from desktop for iperf connection from WHS (through switch): C:\temp>iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [248] local 192.168.1.32 port 5001 connected with 192.168.1.20 port 3227 [ ID] Interval Transfer Bandwidth [248] 0.0-18.5 sec 24.0 KBytes 10.6 Kbits/sec Log from desktop for iperf connection to WHS (through switch): C:\temp>iperf -c 192.168.1.20 ------------------------------------------------------------ Client connecting to 192.168.1.20, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 192.168.1.32 port 57012 connected with 192.168.1.20 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-10.3 sec 28.5 MBytes 23.3 Mbits/sec What is going on here? Unfortunately I don't have any other gigabit-capable devices to try with.

  Read the article

• Error regarding DNS - "... must be able to resolve names ..." (Windows Server 2008 R2 installation)

  - by Scolytus

  I'm trying to replace our old Windows 2000 Server by a Windows Server 2008 R2. I followed the guide at MSDN. Coming to the step "Install Active Directory Domain Services..." the option to install the DNS-Server was grayed-out. According to Microsoft Support I skipped the DNS Server Installation at this point. (Because of the single-label DNS name) I then installed the DNS-Server role and created a forward-lookup-zone for the domain. When running the Best Practices Analyzer of the DNS-Server role I get these two messages for both domain controllers (the old win2k and the new win 2008 R2): The DNS server [IP address] on [adapter name] must be able to resolve names in the primary DNS domain zone The DNS server [IP address] on [adapter name] must be able to resolve names in the forest root domain name zone The TechCenter articles suggest to use a proper DNS Server - that's pointless when I try to configure a proper DNS Server. How do I configure the DNS Server in a way that it resolves these zones? Or are these errors irrelevant? dcdiag /v /test:DNS Seems to run fine...

  Read the article

• Unable to write DVD-R(Blank DVD's)

  - by FrozenKing

  I have a problem in dvd drive i.e. It can read CD/DVD and can write CD and all CD/DVD-RW but cannot write DVD DVD drive model is SH-S203B Samsung; I also have a log file created by nero burning rom 11. Actually the fact is no Blank DVD's are being read in my dvd drive only previously written dvd's can be read! Is this the problem of OS or should I try cleaning the dvd drive or my DVD drive is 4yrs old so is it going to spoil now, since it is showing this type of symptoms! OS = WinXP AV = KIS 2012 DVD Drive = Samsung SH-S203B (Also tried latest firmware and downgrade versions also) IA32 Nero Version: 11.2.4.100 Internal Version: 11,2,4,100 Recorder: <TSSTcorp CDDVDW SH-S203B>Version: SB04 - HA 1 TA 0 - 11.2.4.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data CD-ROM: <TSSTcorp CDDVDW SH-S203B >Version: SB04 - HA 1 TA 0 - 11.2.4.100 Adapter driver: <Serial ATA> HA 1 18:58:10 #37 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 00 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000 18:58:10 #38 SectorVerify 20 File Cdrdrv.cpp, Line 12057 Read errors from sector 0 to 14 <Padding> 18:58:19 #39 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 10 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000 18:58:19 #40 SectorVerify 21 File Cdrdrv.cpp, Line 12057 Read error at sector 15 <Virtual Multisession Info> 18:58:19 #41 SectorVerify 20 File Cdrdrv.cpp, Line 12057 Read errors from sector 16 to 18 <Volume Structure Descriptor Sequence> 18:58:28 #42 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 20 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >