Search Results

Search found 13401 results on 537 pages for 'external monitor'.

Page 50/537 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you. Thank you Anees Bakrain Only the ATI Radeon HD 4300/4500 Series adapter is displayed in the Device Manager, for that reason I have to assume that the onboard display adaptor is not active. All 40 drivers of Sarastro2 are up to date and the HDMI cable can not be the problem because both monitors displayed the boot sequence up to the moment when Windows 7 was loaded completely. This was the moment, when the Asus monitor lost its signal. Both connectors, HDMI and DVI are connected and removing the DVI connector would not solve my problem of running both monitors simultaneously. However, your suggestions shifted my seventy one year old brain into the next gear. The only question remaining is; “Why the signals to the Asus monitor stop after the sequence is complete”. The ATI Radeon HD 4300/4500 Series adapter seems to be capable of sending simultaneous HDMI and DVI signals, what is done during the boot sequence. Why do the signals change after the boot sequence is complete is the key question or der springende Punkt? Is this a correct assumption slhck?

  Read the article

• Monitor Bonded Interface for Disconnection

  - by bradlis7

  I am trying to monitor for network failures on a machine, and one portion of that is to monitor interfaces that are intended to be active also be "RUNNING". An Ethernet port, such as eth0, will say "RUNNING" if it is physically connected to another device. The problem lies in the bonded interfaces, such as bond0. If all of the ethernet devices are disconnected, it still says that it is running, and it is still pingable. Is this by design, or is my system setup incorrectly? Does the miimon option have something to do with this?

  Read the article

• Cannot move Google Chrome tabs to different monitor in ubuntu

  - by Moses

  When I use Chrome in Windows, I can grab a tab and drag it over to my second monitor and it will automatically maximize. In ubuntu, when I try to do the same, the tab will snap back to my primary monitor and maximize there. There is a related bug report for Chromium that is labeled "fixed" here, but when I try using Chromium instead of Chrome, I get the same behavior (not what I called fixed). So far the only other thing I've tried is changing themes, resetting Chrome's settings to default and tested Chromium as I pointed out above. I've also tried installing Chrome from a live Linux disc, and the behavior is still the same. The issue does not occur with Firefox, but I need to use Chrome for work-related reasons, so simply switching isn't really an option personally (though it is a viable workaround). I'm using Chrome 30 and ubuntu 13.04. Does anyone have any solutions?

  Read the article

• Utility to monitor vsftpd.log

  - by Claudiu

  Is there a Linux utility that can monitor vsftpd.log an extract bandwidth usage information for every user ?

  Read the article

• HP Probook 6550b has issues with an external monitor

  - by chama

  I recently got a new HP Probook 6550b laptop for work. However, very often, when left alone (not put to sleep), the built in display will go dark. Not only that, but whenever I plug in an external monitor, the display will blank out as well. Sometimes after this happens, putting the laptop to sleep and then waking it up solves the problem. But only sometimes and only for a short time. The next time I plug in my monitor, it happens again. I know this isn't only my problem - 6 other people got the same laptop as I have at the same time, and we're all having such issues. Any suggestions as to the root of this problem and a way to fix it? It's driving me crazy!

  Read the article

• Windows 7 dual monitor setup: Wallpaper alignment

  - by Tomalak

  I have the following dual-screen set up on my Windows 7 PC: [2][1], that means my secondary monitor is on the right side of my primary monitor. Now I have a dual-screen wallpaper that should stretch across the monitors. I have set it to "Tile" mode. Problem: The wallpaper invariably starts at [1] (left edge of the image being on the left edge of [1]), and then continues on [2]. It basically splits the wrong way, producing a rather awkward look. How can I make the wallpaper appear correctly (i.e. left edge of the image being on the left edge of [2])?

  Read the article

• Adjusting color on one monitor in Nvidia Surround

  - by Chris Stauffer

  I'm currently running three 2560x1440 screens using Nvidia Surround. Two monitors are Yamakasi Catleaps (cheap Korean jobs) and the third is the Achievia Shimian (also Korean). The Catleaps have great color reproduction, however the Shimian is exceptionally blue tinted. With normal monitors the required correction would require minimal effort to accomplish. But these Korean monitors do not have hardware controls to do it. For those who are unfamiliar, Nvidia Surround basically takes all three monitors and makes one big "monitor" out of all of them (Xinerama for GNU/Linux folk), at a resolution of 7680x1440 in my situation. Therefore, adjusting the color profile in the Nvidia control panel changes the settings for ALL of the monitors simultaneously. Thus, I am looking for some software to adjust the Shimian (perhaps by just selecting the pixels that that monitor encompasses). Does anyone know of such a program?

  Read the article

• How can we monitor a HTTPS URL?

  - by Animesh

  A couple of our recent customers have had their applications configured for HTTPS only. Currently we are using a tool which does a good job of monitoring customers' app-server state. For the existing customers, HTTP URLs also work, so the tool can monitor the health. But the recent one have only the HTTPS enabled so the tool fails automatically. To this end, I am looking for a tool which would monitor the app-server state and send email to the group. Simple monitoring like checking to see if the app-server is up or not is all I would need. But more features are also definitely helpful. Thanks!

  Read the article

• Dell Multi-Monitor Hub: true DisplayPort splitting?

  - by thepurplepixel

  In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks!

  Read the article

• how to force 1440x900 resolution on acer al1702w lcd monitor

  - by ashishsony

  i have acer al1702w lcd monitor in my office.. somehow i restarted the system using the reset button as the os stoped responding.. since then the 1440x900 resolution option in the display settings is not appearing.. the intel graphocs is 82945G... and as always the h/w guys at the office are of no help.. they start blurting out their theories that this the best resolution... even though i show them that the max resolution for the monitor is indeed 1440x900.. and its not that the 82945g cant handle it... as it was working before.. i installed the latest drivers for this graphics but still im not finding that option... how to force 1440x900 resolution... oh tes the os ix xp pro sp2 Thanks..

  Read the article

• How do you monitor a monitoring server?

  - by organicveggie

  So we run Groundworks (with Nagios) on CentOS to monitor our various servers and processes. I have it setup to automatically send emails and SMS texts when things reach a WARNING or CRITICAL state. Normally this works perfectly. However, twice we've had problems with Postfix on that server where Postfix decides to stop sending email. The most recent time lasted 4 days because none of us noticed. That leads me to a important question: how am I supposed to monitor my monitoring server?

  Read the article

• How do I run vino-server without a monitor attached in Ubuntu 10.04

  - by Ole

  I just upgraded to Ubuntu 10.04 yesterday on a headless home server. I use the server for a variety of purposes, and what I don't know how to do via SSH I've alway been able to do through VNC. However, since the upgrade vino-server will no longer run if there isn't a monitor attached. Before it used to start up without a problem. Even by attempting to run the server via SSH gives me a "could not load display" error. Summary: I need to get vino-server running at boot time on a server with Ubuntu 10.04, without a monitor attached.

  Read the article

• BIG IP - HTTPS Health Monitor setup

  - by djo

  I have a Web site that we have setup a health monitoring pages so we can take our servers in and out of the Big-IP as we see fit. Now we have just moved onto Big-IP and the issue I have hit is that you setup Health Monitors for port 80 and 443, now the 80 check works fine but when I to get the 443 check to look at our file it fails. Now I am aware as I am hitting the this page on the IP address over HTTPS is going to cause a cert error but I would have guessed that BIG-Ip would have been setup just to accept the cert and carry on with the check. Is what I am wanting to do possible? Also is there a way of just using a HTTP monitor for HTTPS? Because if port 80 has stopped sending traffic then if i use the same monitor for 443 it will stop traffic to that. Any help would be great! Thanks

  Read the article

• Can't run monitor at native 1080p resolution on Windows 7

  - by Rex

  I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

  Read the article

• Primary monitor keeps reverting back to the laptop display

  - by Celeritas

  A Macbook Pro running VMware Fusion has a guest operating system of Windows 7. The user often connects an external monitor to the laptop through an HDMI cable. For the display settings "extend the desktop" is selected and I keep setting the primary monitor as the external one but for some annoying reason it keeps changing back. So after Windows starts the taskbar and icons are on the laptop screen which we don't want. I know how to change it but it keeps changing back (and the computer user is non-technical).

  Read the article

• Photoshop changes colors when moved to a different monitor

  - by Jason

  This Yahoo! answers question pretty much sums up my predicament. Unfortunately I haven't really found an actual answer. Here's a screen shot of what happens when I place Photoshop between my monitors. Imagine that the left side of my laptop is the right square and the yellow is the right side of my monitor. When I move the program to one side fully or the other, it takes on the corresponding color. Obviously the color on the right is correct and Photoshop is changing the color of the image when it moves to my external monitor. Also notice how none of the tools or anything are different colors, just the actual image itself. How do I fix this? EDIT You may also notice that the color palette in the left corner is showing that yellow tinge. I didn't actually pick that yellow color, it's supposed to be showing the grey on the left that I used to fill in the square.

  Read the article

• Xen VGA passthrough: is it possible to have dual GPU's with single monitor

  - by user489481

  I hate dual-booting between Windows when I want to play a game and Linux when I need to work. I don't fancy running Linux in a VM and Wine almost never works for me. So, I'm thinking about buying a new mainboard and CPU that is compatible with Xen's VGA passthrough and HVM virtualization. I want to be able to switch between the Linux Dom0 and Windows DomU with ease, but the problem is I need two GPU's and have only one monitor. Right now I have a nVidia GTX 260 in my PC, but I also have a Radeon 4850 sitting in my closet that I was going to sell. My question is, can I salvage the Radeon card to run the Dom0 and have the nVidia card run the DomU while having some kind of device/software to connect them a single monitor? Power supply and airflow issues aside. If not, what would you suggest? Is this even possible?

  Read the article

• Monitor windows startup process

  - by vlad-ardelean

  My win7 starts up pretty slow lately. I think it's some kind of malware, but my antivirus software doesn't pick up anything. How could i monitor the startup processes myself? It seems to me like either something's doing a lot of work, or some important windows process hangs for a while, since there's stuff that i can do while it's starting (like start a console), and stuff that i can't do (like execute the systeminfo command in the console) So if you happen to know how i can monitor my system, that would be great. Thx, you guys rule.

  Read the article

• netbook intel GMA 3150 external monitor 1920x1080 flicker problem

  - by seyenne

  Dear all, i recently purchased a acer netbook (apsire one d260). It runs flawlessly. Yesterday I bought a samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cabel to connect, the monitor instantly switches to the native resolution and now the problem: Occasionaly, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out, that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time..Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur...but for sure, soon or later it will happen again.. I Forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

  Read the article

• Using Process Monitor to track registry changes

  - by CChriss

  It seems many people like using Process Monitor to see what changes are being made to the registry during a process. So I downloaded it. I want to see what changes are made in the registry by some config changes I'm making on my computer so I can write them into a vbs script to do them easily. Can someone tell me how to drive Process Monitor to capture the info? In the Help I don't see how to do it. I'm using Windows 7 home Premium 64 bit.

  Read the article

• Personal Browsing Monitor Software [closed]

  - by jmadden93

  Anyone know of any personal browsing monitor software? I'd like to be able to monitor my own browsing habbits and the time I spend on entertainment, vs work vs educational sites. Something that offers more than simply looking at the history feature built into browsers. It would be nice if it gave you a breakdown of how much time you spend on certain categories of sites like social media, vs video, vs. news, productivity, etc. I think it would be useful to know how one spends their time.

  Read the article

• DELL U2410 Monitor(Display Port) & Graphic card

  - by Anj

  I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

  Read the article

• Remote Desktop AND monitor fail on restart (Win2008R2)

  - by Wesley

  I am in the process of building a small 3 server farm. Each machine is running Window Server 2008 R2. As is normal, I am in the process of installing patch after patch to bring the machine up to snuff. Every time I restart the machine, or most every time, when I try to remote in to the machine I get the Log In window, but then almost immediately I get the message that my remote session was ended. If I physically walk over to the machine and plug in a monitor and keyboard, I see nothing. If I leave the keyboard and monitor in and restart the machine by force, the computer reboots just fine. When windows starts, I get no error message about windows not starting or being shut off unexpectedly. Once I log into the machine physically by the keyboard, I can then remote in to the machine at that point. Very confused. This happens on all 3 machines, these machines have different hardware.

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• Monitor disk I/O for specific drive in OS X

  - by raffi

  In my Macbook Pro, I have two internal drives and I've connected a third drive via USB in enclosure. I am currently doing a secure wipe of the external drive and I was interested in seeing what the disk I/O was for that particular drive, but when I use Activity Monitor I only see the total disk usage for all drives combined. Is there any way to monitor a specific drive's total I/O, preferably via a built-in or free method? I don't want to filter by process ID. I just want to filter by mounted disk.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >