Search Results

Search found 17018 results on 681 pages for 'floppy disk drive'.

Page 50/681 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • How to back up initial state of external backup drive?

    - by intuited
    I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

    Read the article

  • Disk IO Performance Limitations based on numbers of folders/files

    - by Josh
    I have an application where users are allowed to upload images to the server. Our Web Server is a windows 2008 server and we have a site (images.mysite.com) that points to a shared drive on a unix box. The code used to do the uploading is C# 3.5. The system currently supports a workflow where after a threshold is met a new subfolder can be generated. The question we have is how many files and/or subfolders can you have in a single folder before there is a degredation in performance - in serving the images up through IIS 7 and reading/writing through code?

    Read the article

  • How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

    - by Aggrevated
    I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

    Read the article

  • How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

    - by Aggrevated
    I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

    Read the article

  • LVM / Device Mapper maps wrong device

    - by DaDaDom
    Hi, I run a LVM setup on a raid1 created by mdadm. md2 is based on sda6 (major:minor 8:6) and sdb6 (8:22). md2 is partition 9:2. The VG on top of md2 has 4 LVs, var, home, usr, tmp. First the problem: While booting it seems as if the device mapper takes the wrong partition for the mapping! Immediately after boot the information is like ~# dmsetup table systemlvm-home: 0 4194304 linear 8:22 384 systemlvm-home: 4194304 16777216 linear 8:22 69206400 systemlvm-home: 20971520 8388608 linear 8:22 119538048 systemlvm-home: 29360128 6291456 linear 8:22 243270016 systemlvm-tmp: 0 2097152 linear 8:22 41943424 systemlvm-usr: 0 10485760 linear 8:22 20971904 systemlvm-var: 0 10485760 linear 8:22 10486144 systemlvm-var: 10485760 6291456 linear 8:22 4194688 systemlvm-var: 16777216 4194304 linear 8:22 44040576 systemlvm-var: 20971520 10485760 linear 8:22 31457664 systemlvm-var: 31457280 20971520 linear 8:22 48234880 systemlvm-var: 52428800 33554432 linear 8:22 85983616 systemlvm-var: 85983232 115343360 linear 8:22 127926656 ~# cat /proc/mdstat Personalities : [raid1] md2 : active (auto-read-only) raid1 sda6[0] 151798080 blocks [2/1] [U_] md0 : active raid1 sda1[0] sdb1[1] 96256 blocks [2/2] [UU] md1 : active raid1 sda2[0] sdb2[1] 2931776 blocks [2/2] [UU] I have to manually "lvchange -an" all LVs, add /dev/sdb6 back to the raid and reactivate the LVs, then all is fine. But it prevents me from automounting the partitions and obviously leads to a bunch of other problems. If everything works fine, the information is like ~$ cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb6[1] sda6[0] 151798080 blocks [2/2] [UU] ... ~# dmsetup table systemlvm-home: 0 4194304 linear 9:2 384 systemlvm-home: 4194304 16777216 linear 9:2 69206400 systemlvm-home: 20971520 8388608 linear 9:2 119538048 systemlvm-home: 29360128 6291456 linear 9:2 243270016 systemlvm-tmp: 0 2097152 linear 9:2 41943424 systemlvm-usr: 0 10485760 linear 9:2 20971904 systemlvm-var: 0 10485760 linear 9:2 10486144 systemlvm-var: 10485760 6291456 linear 9:2 4194688 systemlvm-var: 16777216 4194304 linear 9:2 44040576 systemlvm-var: 20971520 10485760 linear 9:2 31457664 systemlvm-var: 31457280 20971520 linear 9:2 48234880 systemlvm-var: 52428800 33554432 linear 9:2 85983616 systemlvm-var: 85983232 115343360 linear 9:2 127926656 I think that LVM for some reason just "takes" /dev/sdb6 which is then missing in the raid. I tried almost all options in the lvm.conf but none seems to work. Below is some more information, like config files. Does anyone have any idea about what is going on here and how to prevent that? If you need any additional information, please let me know Thanks in advance! Dominik The information (off a "repaired" system): ~# cat /etc/debian_version 5.0.4 ~# uname -a Linux kermit 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 GNU/Linux ~# lvm version LVM version: 2.02.39 (2008-06-27) Library version: 1.02.27 (2008-06-25) Driver version: 4.13.0 ~# cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md1 level=raid1 num-devices=2 metadata=00.90 UUID=11e9dc6c:1da99f3f:b3088ca6:c6fe60e9 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=92ed1e4b:897361d3:070682b3:3baa4fa1 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=00.90 UUID=601d4642:39dc80d7:96e8bbac:649924ba ~# mount /dev/md1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md0 on /boot type ext3 (rw) /dev/mapper/systemlvm-usr on /usr type reiserfs (rw) /dev/mapper/systemlvm-tmp on /tmp type reiserfs (rw) /dev/mapper/systemlvm-home on /home type reiserfs (rw) /dev/mapper/systemlvm-var on /var type reiserfs (rw) ~# grep -v ^$ /etc/lvm/lvm.conf | grep -v "#" devices { dir = "/dev" scan = [ "/dev" ] preferred_names = [ ] filter = [ "a|/dev/md.*|", "r/.*/" ] cache_dir = "/etc/lvm/cache" cache_file_prefix = "" write_cache_state = 1 sysfs_scan = 1 md_component_detection = 1 ignore_suspended_devices = 0 } log { verbose = 0 syslog = 1 overwrite = 0 level = 0 indent = 1 command_names = 0 prefix = " " } backup { backup = 1 backup_dir = "/etc/lvm/backup" archive = 1 archive_dir = "/etc/lvm/archive" retain_min = 10 retain_days = 30 } shell { history_size = 100 } global { umask = 077 test = 0 units = "h" activation = 1 proc = "/proc" locking_type = 1 fallback_to_clustered_locking = 1 fallback_to_local_locking = 1 locking_dir = "/lib/init/rw" } activation { missing_stripe_filler = "/dev/ioerror" reserved_stack = 256 reserved_memory = 8192 process_priority = -18 mirror_region_size = 512 readahead = "auto" mirror_log_fault_policy = "allocate" mirror_device_fault_policy = "remove" } :~# vgscan -vvv Processing: vgscan -vvv O_DIRECT will be used Setting global/locking_type to 1 File-based locking selected. Setting global/locking_dir to /lib/init/rw Locking /lib/init/rw/P_global WB Wiping cache of LVM-capable devices /dev/block/1:0: Added to device cache /dev/block/1:1: Added to device cache /dev/block/1:10: Added to device cache /dev/block/1:11: Added to device cache /dev/block/1:12: Added to device cache /dev/block/1:13: Added to device cache /dev/block/1:14: Added to device cache /dev/block/1:15: Added to device cache /dev/block/1:2: Added to device cache /dev/block/1:3: Added to device cache /dev/block/1:4: Added to device cache /dev/block/1:5: Added to device cache /dev/block/1:6: Added to device cache /dev/block/1:7: Added to device cache /dev/block/1:8: Added to device cache /dev/block/1:9: Added to device cache /dev/block/253:0: Added to device cache /dev/block/253:1: Added to device cache /dev/block/253:2: Added to device cache /dev/block/253:3: Added to device cache /dev/block/8:0: Added to device cache /dev/block/8:1: Added to device cache /dev/block/8:16: Added to device cache /dev/block/8:17: Added to device cache /dev/block/8:18: Added to device cache /dev/block/8:19: Added to device cache /dev/block/8:2: Added to device cache /dev/block/8:21: Added to device cache /dev/block/8:22: Added to device cache /dev/block/8:3: Added to device cache /dev/block/8:5: Added to device cache /dev/block/8:6: Added to device cache /dev/block/9:0: Already in device cache /dev/block/9:1: Already in device cache /dev/block/9:2: Already in device cache /dev/bsg/0:0:0:0: Not a block device /dev/bsg/1:0:0:0: Not a block device /dev/bus/usb/001/001: Not a block device [... many more "not a block device"] /dev/core: Not a block device /dev/cpu_dma_latency: Not a block device /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-id/dm-name-systemlvm-home: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/dm-name-systemlvm-tmp: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-name-systemlvm-usr: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-name-systemlvm-var: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr25N7CRZpUMzR18NfS6zeSeAVnVT98LuU: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr3TpFXtLjYGEwn79IdXsSCZPl8AxmqbmQ: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrc5MJ4KolevMjt85PPBrQuRTkXbx6NvTi: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrYXrfdg5OSYDVkNeiQeQksgCI849Z2hx8: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/md-uuid-11e9dc6c:1da99f3f:b3088ca6:c6fe60e9: Already in device cache /dev/disk/by-id/md-uuid-601d4642:39dc80d7:96e8bbac:649924ba: Already in device cache /dev/disk/by-id/md-uuid-92ed1e4b:897361d3:070682b3:3baa4fa1: Already in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0: Aliased to /dev/block/8:0 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0: Aliased to /dev/block/8:16 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-uuid/13c1262b-e06f-40ce-b088-ce410640a6dc: Aliased to /dev/block/253:3 in device cache /dev/disk/by-uuid/379f57b0-2e03-414c-808a-f76160617336: Aliased to /dev/block/253:2 in device cache /dev/disk/by-uuid/4fb2d6d3-bd51-48d3-95ee-8e404faf243d: Already in device cache /dev/disk/by-uuid/5c6728ec-82c1-49c0-93c5-f6dbd5c0d659: Aliased to /dev/block/8:5 in device cache /dev/disk/by-uuid/a13cdfcd-2191-4185-a727-ffefaf7a382e: Aliased to /dev/block/253:1 in device cache /dev/disk/by-uuid/e0d5893d-ff88-412f-b753-9e3e9af3242d: Aliased to /dev/block/8:21 in device cache /dev/disk/by-uuid/e79c9da6-8533-4e55-93ec-208876671edc: Aliased to /dev/block/253:0 in device cache /dev/disk/by-uuid/f3f176f5-12f7-4af8-952a-c6ac43a6e332: Already in device cache /dev/dm-0: Aliased to /dev/block/253:0 in device cache (preferred name) /dev/dm-1: Aliased to /dev/block/253:1 in device cache (preferred name) /dev/dm-2: Aliased to /dev/block/253:2 in device cache (preferred name) /dev/dm-3: Aliased to /dev/block/253:3 in device cache (preferred name) /dev/fd: Symbolic link to directory /dev/full: Not a block device /dev/hpet: Not a block device /dev/initctl: Not a block device /dev/input/by-path/platform-i8042-serio-0-event-kbd: Not a block device /dev/input/event0: Not a block device /dev/input/mice: Not a block device /dev/kmem: Not a block device /dev/kmsg: Not a block device /dev/log: Not a block device /dev/loop/0: Added to device cache /dev/MAKEDEV: Not a block device /dev/mapper/control: Not a block device /dev/mapper/systemlvm-home: Aliased to /dev/dm-2 in device cache /dev/mapper/systemlvm-tmp: Aliased to /dev/dm-3 in device cache /dev/mapper/systemlvm-usr: Aliased to /dev/dm-1 in device cache /dev/mapper/systemlvm-var: Aliased to /dev/dm-0 in device cache /dev/md0: Already in device cache /dev/md1: Already in device cache /dev/md2: Already in device cache /dev/mem: Not a block device /dev/net/tun: Not a block device /dev/network_latency: Not a block device /dev/network_throughput: Not a block device /dev/null: Not a block device /dev/port: Not a block device /dev/ppp: Not a block device /dev/psaux: Not a block device /dev/ptmx: Not a block device /dev/pts/0: Not a block device /dev/ram0: Aliased to /dev/block/1:0 in device cache (preferred name) /dev/ram1: Aliased to /dev/block/1:1 in device cache (preferred name) /dev/ram10: Aliased to /dev/block/1:10 in device cache (preferred name) /dev/ram11: Aliased to /dev/block/1:11 in device cache (preferred name) /dev/ram12: Aliased to /dev/block/1:12 in device cache (preferred name) /dev/ram13: Aliased to /dev/block/1:13 in device cache (preferred name) /dev/ram14: Aliased to /dev/block/1:14 in device cache (preferred name) /dev/ram15: Aliased to /dev/block/1:15 in device cache (preferred name) /dev/ram2: Aliased to /dev/block/1:2 in device cache (preferred name) /dev/ram3: Aliased to /dev/block/1:3 in device cache (preferred name) /dev/ram4: Aliased to /dev/block/1:4 in device cache (preferred name) /dev/ram5: Aliased to /dev/block/1:5 in device cache (preferred name) /dev/ram6: Aliased to /dev/block/1:6 in device cache (preferred name) /dev/ram7: Aliased to /dev/block/1:7 in device cache (preferred name) /dev/ram8: Aliased to /dev/block/1:8 in device cache (preferred name) /dev/ram9: Aliased to /dev/block/1:9 in device cache (preferred name) /dev/random: Not a block device /dev/root: Already in device cache /dev/rtc: Not a block device /dev/rtc0: Not a block device /dev/sda: Aliased to /dev/block/8:0 in device cache (preferred name) /dev/sda1: Aliased to /dev/block/8:1 in device cache (preferred name) /dev/sda2: Aliased to /dev/block/8:2 in device cache (preferred name) /dev/sda3: Aliased to /dev/block/8:3 in device cache (preferred name) /dev/sda5: Aliased to /dev/block/8:5 in device cache (preferred name) /dev/sda6: Aliased to /dev/block/8:6 in device cache (preferred name) /dev/sdb: Aliased to /dev/block/8:16 in device cache (preferred name) /dev/sdb1: Aliased to /dev/block/8:17 in device cache (preferred name) /dev/sdb2: Aliased to /dev/block/8:18 in device cache (preferred name) /dev/sdb3: Aliased to /dev/block/8:19 in device cache (preferred name) /dev/sdb5: Aliased to /dev/block/8:21 in device cache (preferred name) /dev/sdb6: Aliased to /dev/block/8:22 in device cache (preferred name) /dev/shm/network/ifstate: Not a block device /dev/snapshot: Not a block device /dev/sndstat: stat failed: Datei oder Verzeichnis nicht gefunden /dev/stderr: Not a block device /dev/stdin: Not a block device /dev/stdout: Not a block device /dev/systemlvm/home: Aliased to /dev/dm-2 in device cache /dev/systemlvm/tmp: Aliased to /dev/dm-3 in device cache /dev/systemlvm/usr: Aliased to /dev/dm-1 in device cache /dev/systemlvm/var: Aliased to /dev/dm-0 in device cache /dev/tty: Not a block device /dev/tty0: Not a block device [... many more "not a block device"] /dev/vcsa6: Not a block device /dev/xconsole: Not a block device /dev/zero: Not a block device Wiping internal VG cache lvmcache: initialised VG #orphans_lvm1 lvmcache: initialised VG #orphans_pool lvmcache: initialised VG #orphans_lvm2 Reading all physical volumes. This may take a while... Finding all volume groups /dev/ram0: Skipping (regex) /dev/loop/0: Skipping (sysfs) /dev/sda: Skipping (regex) Opened /dev/md0 RO /dev/md0: size is 192512 sectors Closed /dev/md0 /dev/md0: size is 192512 sectors Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes Closed /dev/md0 Using /dev/md0 Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes /dev/md0: No label detected Closed /dev/md0 /dev/dm-0: Skipping (regex) /dev/ram1: Skipping (regex) /dev/sda1: Skipping (regex) Opened /dev/md1 RO /dev/md1: size is 5863552 sectors Closed /dev/md1 /dev/md1: size is 5863552 sectors Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes Closed /dev/md1 Using /dev/md1 Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes /dev/md1: No label detected Closed /dev/md1 /dev/dm-1: Skipping (regex) /dev/ram2: Skipping (regex) /dev/sda2: Skipping (regex) Opened /dev/md2 RO /dev/md2: size is 303596160 sectors Closed /dev/md2 /dev/md2: size is 303596160 sectors Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes Closed /dev/md2 Using /dev/md2 Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Closed /dev/md2 /dev/dm-2: Skipping (regex) /dev/ram3: Skipping (regex) /dev/sda3: Skipping (regex) /dev/dm-3: Skipping (regex) /dev/ram4: Skipping (regex) /dev/ram5: Skipping (regex) /dev/sda5: Skipping (regex) /dev/ram6: Skipping (regex) /dev/sda6: Skipping (regex) /dev/ram7: Skipping (regex) /dev/ram8: Skipping (regex) /dev/ram9: Skipping (regex) /dev/ram10: Skipping (regex) /dev/ram11: Skipping (regex) /dev/ram12: Skipping (regex) /dev/ram13: Skipping (regex) /dev/ram14: Skipping (regex) /dev/ram15: Skipping (regex) /dev/sdb: Skipping (regex) /dev/sdb1: Skipping (regex) /dev/sdb2: Skipping (regex) /dev/sdb3: Skipping (regex) /dev/sdb5: Skipping (regex) /dev/sdb6: Skipping (regex) Locking /lib/init/rw/V_systemlvm RB Finding volume group "systemlvm" Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) with 1 mdas /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Using cached label for /dev/md2 Read systemlvm metadata (19) from /dev/md2 at 39936 size 2632 /dev/md2 0: 0 16: home(0:0) /dev/md2 1: 16 24: var(40:0) /dev/md2 2: 40 40: var(0:0) /dev/md2 3: 80 40: usr(0:0) /dev/md2 4: 120 40: var(80:0) /dev/md2 5: 160 8: tmp(0:0) /dev/md2 6: 168 16: var(64:0) /dev/md2 7: 184 80: var(120:0) /dev/md2 8: 264 64: home(16:0) /dev/md2 9: 328 128: var(200:0) /dev/md2 10: 456 32: home(80:0) /dev/md2 11: 488 440: var(328:0) /dev/md2 12: 928 24: home(112:0) /dev/md2 13: 952 206: NULL(0:0) Found volume group "systemlvm" using metadata type lvm2 Read volume group systemlvm from /etc/lvm/backup/systemlvm Unlocking /lib/init/rw/V_systemlvm Closed /dev/md2 Unlocking /lib/init/rw/P_global ~# vgdisplay --- Volume group --- VG Name systemlvm System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 19 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 4 Max PV 0 Cur PV 1 Act PV 1 VG Size 144,75 GB PE Size 128,00 MB Total PE 1158 Alloc PE / Size 952 / 119,00 GB Free PE / Size 206 / 25,75 GB VG UUID rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr ~# pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name systemlvm PV Size 144,77 GB / not usable 16,31 MB Allocatable yes PE Size (KByte) 131072 Total PE 1158 Free PE 206 Allocated PE 952 PV UUID ZSAzP5-iBvr-L7jy-wB8T-AiWz-0g3m-HLK66Y :~# lvdisplay --- Logical volume --- LV Name /dev/systemlvm/home VG Name systemlvm LV UUID YXrfdg-5OSY-DVkN-eiQe-Qksg-CI84-9Z2hx8 LV Write Access read/write LV Status available # open 2 LV Size 17,00 GB Current LE 136 Segments 4 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/systemlvm/var VG Name systemlvm LV UUID 25N7CR-ZpUM-zR18-NfS6-zeSe-AVnV-T98LuU LV Write Access read/write LV Status available # open 2 LV Size 96,00 GB Current LE 768 Segments 7 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/systemlvm/usr VG Name systemlvm LV UUID 3TpFXt-LjYG-Ewn7-9IdX-sSCZ-Pl8A-xmqbmQ LV Write Access read/write LV Status available # open 2 LV Size 5,00 GB Current LE 40 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/systemlvm/tmp VG Name systemlvm LV UUID c5MJ4K-olev-Mjt8-5PPB-rQuR-TkXb-x6NvTi LV Write Access read/write LV Status available # open 2 LV Size 1,00 GB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

    Read the article

  • The Beginner’s Guide to Linux Disk Utilities

    - by Zainul Franciscus
    Knowing how to check the condition of your hard disk is useful to determine when to replace your hard disk. In today’s article, we will show you some Linux disk utilities to diagnose the health of your hard disk. Image by Scoobay Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

    Read the article

  • The difference between desktop-series HDD drives and server-series

    - by FractalizeR
    Hello. What are the main differences between desktop-series hard disks and server-series? The obvious things I can see are: durability (server hardware mostly more qualitative and have more warranty) and power consumption (server hardware more focused on performance, than on power economy). Also server disks are usually a little faster, but it seems, that it is not always the case. May be there are some other reasons, that make you choose server-oriented series (Seagate ES drives, for example) over desktop-oriented ones (Seagate Barracuda series)? What are they?

    Read the article

  • How to backup a networked drive?

    - by nute
    I have a networked drive (Iomega Media Drive). To be safe in case the drives crashes, I've decided to buy an additional networked drive (WD MyBook World). Now, how do I backup one onto the other continuously? The WD drive came with a backup software (trial version, they didn't say that when i bought it), however it doesn't allow me to select a networked drive, only local drives. How do I backup a NETWORKED DRIVE ONTO A NETWORKED DRIVE? Thanks

    Read the article

  • Find and free disk space that is unused but unavailable (due to file system error, etc.)

    - by Voyagerfan5761
    Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

    Read the article

  • Why do [flush-8:16] and [jbd2/sdb2-8] occasionally use 99.99% disk IO?

    - by ændrük
    Approximately twice a week, the entire graphical interface will lock up for about 10-20 seconds without warning while I am doing simple tasks such as browsing the web or writing a paper. When this happens, GUI elements do not respond to mouse or keyboard input, and the System Monitor applet displays 100% IOWait processor usage. Today, I finally happened to have GNOME Terminal already open when the problem started. Despite other applications such as Google Chrome, Firefox, GNOME Do, and GNOME Panel being unresponsive, the terminal was usable. I ran iotop and observed that commands named [flush-8:16] and [jbd2/sdb2-8] were alternately using 99.99% IO. What are these, and how can I prevent them from causing GUI unresponsiveness? Here is dumpe2fs /dev/sdb2, if it's relevant.

    Read the article

  • 6 Ways to Free Up Hard Drive Space Used by Windows System Files

    - by Chris Hoffman
    We’ve previously covered the standard ways to free up space on Windows. But if you have a small solid-state drive and really want more hard space, there are geekier ways to reclaim hard drive space. Not all of these tips are recommended — in fact, if you have more than enough hard drive space, following these tips may actually be a bad idea. There’s a tradeoff to changing all of these settings. Erase Windows Update Uninstall Files Windows allows you to uninstall patches you install from Windows Update. This is helpful if an update ever causes a problem — but how often do you need to uninstall an update, anyway? And will you really ever need to uninstall updates you’ve installed several years ago? These uninstall files are probably just wasting space on your hard drive. A recent update released for Windows 7 allows you to erase Windows Update files from the Windows Disk Cleanup tool. Open Disk Cleanup, click Clean up system files, check the Windows Update Cleanup option, and click OK. If you don’t see this option, run Windows Update and install the available updates. Remove the Recovery Partition Windows computers generally come with recovery partitions that allow you to reset your computer back to its factory default state without juggling discs. The recovery partition allows you to reinstall Windows or use the Refresh and Reset your PC features. These partitions take up a lot of space as they need to contain a complete system image. On Microsoft’s Surface Pro, the recovery partition takes up about 8-10 GB. On other computers, it may be even larger as it needs to contain all the bloatware the manufacturer included. Windows 8 makes it easy to copy the recovery partition to removable media and remove it from your hard drive. If you do this, you’ll need to insert the removable media whenever you want to refresh or reset your PC. On older Windows 7 computers, you could delete the recovery partition using a partition manager — but ensure you have recovery media ready if you ever need to install Windows. If you prefer to install Windows from scratch instead of using your manufacturer’s recovery partition, you can just insert a standard Window disc if you ever want to reinstall Windows. Disable the Hibernation File Windows creates a hidden hibernation file at C:\hiberfil.sys. Whenever you hibernate the computer, Windows saves the contents of your RAM to the hibernation file and shuts down the computer. When it boots up again, it reads the contents of the file into memory and restores your computer to the state it was in. As this file needs to contain much of the contents of your RAM, it’s 75% of the size of your installed RAM. If you have 12 GB of memory, that means this file takes about 9 GB of space. On a laptop, you probably don’t want to disable hibernation. However, if you have a desktop with a small solid-state drive, you may want to disable hibernation to recover the space. When you disable hibernation, Windows will delete the hibernation file. You can’t move this file off the system drive, as it needs to be on C:\ so Windows can read it at boot. Note that this file and the paging file are marked as “protected operating system files” and aren’t visible by default. Shrink the Paging File The Windows paging file, also known as the page file, is a file Windows uses if your computer’s available RAM ever fills up. Windows will then “page out” data to disk, ensuring there’s always available memory for applications — even if there isn’t enough physical RAM. The paging file is located at C:\pagefile.sys by default. You can shrink it or disable it if you’re really crunched for space, but we don’t recommend disabling it as that can cause problems if your computer ever needs some paging space. On our computer with 12 GB of RAM, the paging file takes up 12 GB of hard drive space by default. If you have a lot of RAM, you can certainly decrease the size — we’d probably be fine with 2 GB or even less. However, this depends on the programs you use and how much memory they require. The paging file can also be moved to another drive — for example, you could move it from a small SSD to a slower, larger hard drive. It will be slower if Windows ever needs to use the paging file, but it won’t use important SSD space. Configure System Restore Windows seems to use about 10 GB of hard drive space for “System Protection” by default. This space is used for System Restore snapshots, allowing you to restore previous versions of system files if you ever run into a system problem. If you need to free up space, you could reduce the amount of space allocated to system restore or even disable it entirely. Of course, if you disable it entirely, you’ll be unable to use system restore if you ever need it. You’d have to reinstall Windows, perform a Refresh or Reset, or fix any problems manually. Tweak Your Windows Installer Disc Want to really start stripping down Windows, ripping out components that are installed by default? You can do this with a tool designed for modifying Windows installer discs, such as WinReducer for Windows 8 or RT Se7en Lite for Windows 7. These tools allow you to create a customized installation disc, slipstreaming in updates and configuring default options. You can also use them to remove components from the Windows disc, shrinking the size of the resulting Windows installation. This isn’t recommended as you could cause problems with your Windows installation by removing important features. But it’s certainly an option if you want to make Windows as tiny as possible. Most Windows users can benefit from removing Windows Update uninstallation files, so it’s good to see that Microsoft finally gave Windows 7 users the ability to quickly and easily erase these files. However, if you have more than enough hard drive space, you should probably leave well enough alone and let Windows manage the rest of these settings on its own. Image Credit: Yutaka Tsutano on Flickr     

    Read the article

  • Any large USB sticks with integrated card readers?

    - by Al
    I have one of Kingston's DataTraveller Micro Reader USB sticks, a fantastic memory stick with an integrated micro SD and M2 card reader. However, I've gradually filled it to the brim and am looking for a larger stick. Unfortunately, Kingston don't make them any bigger than the 4GB one that I currently have and I was hoping to go to 16GB now that they've come down in price. Does anyone know if any manufacturers make something similar: a 16GB stick with a micro SD card reader integrated (I'm not bothered about the M2 reader).

    Read the article

  • Troubleshooting major performance issue: Is culprit Intel RST, Hard drive, or something else?

    - by Sean Killeen
    The Setup I have the following components that come into play in this situation: ASUS P8Z68 V/PRO motherboard a RAID1 configuration (1x 1TB drive, 1 x 2TB drive -- I explain below), accelerated with an SSD using Intel's RST software, and 1 TB drive standing by as a spare. Core i7 2600k 32 GB RAM Windows 8.1 This box was designed to be beast, and until just recently, was very good at being just that. What's Happening The system has slowed to a crawl whenever it touches the disk. Things appear to work at normal speed when dealing with memory. For example, typing this is fine, but saving it to disk from notepad gave me a 5-7 second pause when clicking save. The disks appear to be at 100% all the time (e.g. the light on the disk access on the PC is solidly on -- not even any flashing) In ProcExp it appears that the disk is barely being utilized at all: Intel RST reports that everything is fine: Other Details Prior to this happening, RST had reported that my drives were failing (one went bad, one was throwing SMART events). This made sense; they were at the tail end of their warranty and the PC is on almost all the time. I RMA'd the drives via Seagate. In the meantime, I'd purchased a 2TB drive because I didn't realize that the 1TB drives were under warranty. I figured I'd replace the other 1 TB drive with another 2 TB when it died but then discovered the warranty. AFAIK, I haven't done any major updates since 8.1 and it worked fine after those. Question(s) How can I troubleshoot this? What is the best way to try to figure out why disks are being maxed out despite the OS reporting barely any disk usage and that everything is OK? Given the failures, etc. that I describe above, is it possible that the problem could be the I/O on the motherboard itself? If so, how would I even be able to diagnose it? I'm betting the drives that Seagate gave me are refurbished (didn't think to look; that's dumb). Is it possible that the same model drive, refurbished, could somehow cause this? In terms of how RAID1 works, is it possible that one drive is "falling behind" somehow, and that the RAID1 is constantly trying to fix the mirroring? If so, this seems like Intel RST would report on it, but I wanted to consider it as an option.

    Read the article

  • How to create VHD disk image from a Linux live system?

    - by Federico
    Once more, I have to resort at the experts here at SuperUser, as my other sources (mainly Google ;-)) didn't prove very helpful... So basically, I would like to create a VHD image of a physical disk to be archived/accessed/maybe even mounted in a virtual machine. Now, there are dozens of articles and tutorials on how to do that on the web, but none that meets exactly the conditions I would like to achieve: I would like the destination file to be a VHD image, as Windows 7 can mount it natively, even over the network and many other programs can use it (VirtualBox, ...) The disk I'm trying to image contains a Windows XP install, so in theory, I could use the disk2vhd utility, but I would like to find a solution that doesn't require booting that Windows XP install (ie keep the disk read-only) Thus I was searching for a solution involving some sort of live system (running from a USB stic or the network) However, all the solutions that I've came across either make use of disk2vhd or use the dd command under linux, which does a complete copy of the disk (ie even empty blocks) and does not output a VHD file. Is there a tool/program under Linux that can directly create a VHD file? Or is is possible to convert a raw disk image created using dd to a VHD file, without allocating space for the empty blocks? How would you proceed? As always, any advice or comment is highly appreciated!!

    Read the article

  • Automount of external hard disk

    - by moose
    I have an Intenso 6002560 1TB Memory Station - an external hard disk. This hard disk gets connected via Y-USB cable. When I connect both USB-ends to my Notebook, it gets recognized by my Ubuntu 10.04.4 LTS system: moose@pc07:~$ lsusb [...] Bus 002 Device 005: ID 13fd:1840 Initio Corporation [...] and Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065e10 Device Boot Start End Blocks Id System /dev/sda1 * 1 37810 303704064 83 Linux /dev/sda2 37810 38914 8864769 5 Extended /dev/sda5 37810 38914 8864768 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0d6ea32a Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976759008+ c W95 FAT32 (LBA) But it did not get mounted: moose@pc07:/dev$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) However, I could mount it manually with mount -t vfat /dev/sdc1 /mnt/sdc1 as you can see here: moose@pc07:~$ mount -l /dev/sda1 on / type ext4 (rw,errors=remount-ro,user_xattr) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/moose/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=moose) /dev/sdc1 on /mnt/sdc1 type vfat (rw) edit: Another command: moose@pc07:~$ sudo blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 moose@pc07:~$ blkid -o list device fs_type label mount point UUID ---------------------------------------------------------------------------------------------------------------------- /dev/sda1 ext4 / 45eb611b-517e-425b-8057-0391726cccd5 /dev/sda5 swap <swap> e9dc42f3-594c-4b62-874a-305eda5eed41 /dev/sdc1 /mnt/sdc1 edit: another command: moose@pc07:~$ ls -l /dev/disk/by-uuid/ total 0 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 45eb611b-517e-425b-8057-0391726cccd5 -> ../../sda1 lrwxrwxrwx 1 root root 10 2012-09-30 09:31 e9dc42f3-594c-4b62-874a-305eda5eed41 -> ../../sda5 Here is a link to a Launchpad question about this problem. But I would like it to mount automatically. What do I have to do?

    Read the article

  • CentOS 5.5 installation on disk image

    - by Dima
    Today, in order to install CentOS 5.5 I'm using kickstart script. I would like to install CentOS on different way: Create disk image (using dd command) Create filesystem on this disk image using mkfs.ext3 Install CentOS on this filesystem Make this disk image bootable (using grub-install) Copy the disk image to the physical hard disk (using dd command) I know to do all these items except 3. Is it possible to do it? If yes, how can I install CentOS on the disk image?

    Read the article

  • Why does storage's performance change at various queue depths?

    - by Mxx
    I'm in the market for a storage upgrade for our servers. I'm looking at benchmarks of various PCIe SSD devices and in comparisons I see that IOPS change at various queue depths. How can that be and why is that happening? The way I understand things is: I have a device with maximum (theoretical) of 100k IOPS. If my workload consistently produces 100,001 IOPS, I'll have a queue depth of 1, am I correct? However, from what I see in benchmarks some devices run slower at lower queue depths, then speedup at depth of 4-64 and then slow down again at even larger depths. Isn't queue depths a property of OS(or perhaps storage controller), so why would that affect IOPS?

    Read the article

  • limit linux background flush (dirty pages)

    - by korkman
    Background flushing in linux happens when either too much written data is pending (adjustable via /proc/sys/vm/dirty_background_ratio) or a timeout for pending writes is reached (/proc/sys/vm/dirty_expire_centisecs). Unless another limit is being hit (/proc/sys/vm/dirty_ratio), more written data may be cached. Further writes will block. In theory, this should create a background process writing out dirty pages without disturbing other processes. In practice, it does disturb any process doing uncached reading or synchronous writing. Badly. This is because the background flush actually writes at 100% device speed and any other device requests at this time will be delayed (because all queues and write-caches on the road are filled). Is there any way to limit the amount of requests per second the flushing process performs, or otherwise effectively prioritize other device I/O?

    Read the article

  • Disallow user from decrypting the startup disk

    - by Blacklight Shining
    When you enable FileVault's full-disk encryption, it asks for the password of each account on the system to allow every user to decrypt the disk. You can simply choose not to have a user enter their password, and they will not be able to decrypt the disk. However, if you create an account after enabling disk encryption, the user is automatically allowed to decrypt the disk. How do I disallow a user from decrypting the startup disk?

    Read the article

  • Ubuntu 12.04.1 LTS USB not being detected after formatting with Startup Disk Creator

    - by Zach
    sudo fdisk -l lists the drive, however, I cannot find it in the file explorer. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d871e Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris Disk /dev/sdb: 8195 MB, 8195480064 bytes 253 heads, 62 sectors/track, 1020 cylinders, total 16006797 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027ae4 Device Boot Start End Blocks Id System /dev/sdb1 * 62 15999719 M 7999829 c W95 FAT32 (LBA) Manually mounting it produces this error message :~$ sudo mount -t vfat /dev/sdb1 /media/external -ouiduid=1000,gid=1000,utf8,dmask=027,fmask=137 mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Is the usb toast?

    Read the article

  • Ubuntu 11.10 doesn't detect external usb hard drive

    - by Andrew
    I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

    Read the article

  • HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It

    - by Chris Hoffman
    You’ve probably heard that you need to overwrite a drive multiple times to make the data unrecoverable. Many disk-wiping utilities offer multiple-pass wipes. This is an urban legend – you only need to wipe a drive once. Wiping refers to overwriting a drive with all 0’s, all 1’s, or random data. It’s important to wipe a drive once before disposing of it to make your data unrecoverable, but additional wipes offer a false sense of security. Image Credit: Norlando Pobre on Flickr HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

    Read the article

  • Should I partition a 1TB Hard Disk whose primary use is media storage?

    - by Senthil
    I am going to get a 1TB hard disk. I will be storing 1080p or 720p movies, high-bitrate music and pictures in it. I use my PC 90% of the time only to play/listen/see those. I am running out of space in my current HD so I am getting another one. My specs are 2.7GHz Dual Core, 512MB GeForce 9400GT, 2GB DDR2 RAM and all the proper matroska codecs/players. I guess that is enough to play 1080p movies withough a glitch, given an ideal hard disk. I've read about proper partitioning giving performance improvement etc.. I don't want my hard disk to be the bottleneck. Can someone tell me whether I should partition my 1TB hard disk into many drives? If I should, what is the ideal size of each partition? Smooth playing of movies is very important to me. Once I start filling up the disk, there is no turning back. So I want to get it right before I start. Thanks.

    Read the article

  • Google Drive SDK: Writing your First App in Java

    Google Drive SDK: Writing your First App in Java During this session we'll show how to build a complete Java application that uses the Google Drive API to upload a file into the user's Drive account. If you follow along with the presentation, you can have a working Drive command-line application running by the end of the session. From: GoogleDevelopers Views: 0 0 ratings Time: 00:00 More in Science & Technology

    Read the article

  • Sparse virtual machine disk image resizing weirdness?

    - by Matt H
    I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >