Search Results

Search found 59230 results on 2370 pages for 'character set'.

Page 502/2370 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

  • SPARC M7 Chip - 32 cores - Mind Blowing performance

    - by Angelo-Oracle
    The M7 Chip Oracle just announced its Next Generation Processor at the HotChips HC26 conference. As the Tech Lead in our Systems Division's Partner group, I had a front row seat to the extraordinary price performance advantage of Oracle current T5 and M6 based systems. Partner after partner tested  these systems and were impressed with it performance. Just read some of the quotes to see what our partner has been saying about our hardware. We just announced our next generation processor, the M7. This has 32 cores (up from 16-cores in T5 and 12-cores in M6). With 20 nm technology  this is our most advanced processor. The processor has more cores than anything else in the industry today. After the Sun acquisition Oracle has released 5 processors in 4 years and this is the 6th.  The S4 core  The M7 is built using the foundation of the S4 core. This is the next generation core technology. Like its predecessor, the S4 has 8 dynamic threads. It increases the frequency while maintaining the Pipeline depth. Each core has its own fine grain power estimator that keeps the core within its power envelop in 250 nano-sec granularity. Each core also includes Software in Silicon features for Application Acceleration Support. Each core includes features to improve Application Data Integrity, with almost no performance loss. The core also allows using part of the Virtual Address to store meta-data.  User-Level Synchronization Instructions are also part of the S4 core. Each core has 16 KB Instruction and 16 KB Data L1 cache. The Core Clusters  The cores on the M7 chip are organized in sets of 4-core clusters. The core clusters share  L2 cache.  All four cores in the complex share 256 KB of 4 way set associative L2 Instruction Cache, with over 1/2 TB/s of throughput. Two cores share 256 KB of 8 way set associative L2 Data Cache, with over 1/2 TB/s of throughput. With this innovative Core Cluster architecture, the M7 doubles core execution bandwidth. to maximize per-thread performance.  The Chip  Each  M7 chip has 8 sets of these core-clusters. The chip has 64 MB on-chip L3 cache. This L3 caches is shared among all the cores and is partitioned into 8 x 8 MB chunks. Each chunk is  8-way set associative cache. The aggregate bandwidth for the L3 cache on the chip is over 1.6TB/s. Each chip has 4 DDR4 memory controllers and can support upto 16 DDR4 DIMMs, allowing for 2 TB of RAM/chip. The chip also includes 4 internal links of PCIe Gen3 I/O controllers.  Each chip has 7 coherence links, allowing for 8 of these chips to be connected together gluelessly. Also 32 of these chips can be connected in an SMP configuration. A potential system with 32 chips will have 1024 cores and 8192 threads and 64 TB of RAM.  Software in Silicon The M7 chip has many built in Application Accelerators in Silicon. These features will be exposed to our Software partners using the SPARC Accelerator Program.  The M7  has built-in logic to decompress data at the speed of memory access. This means that applications can directly work on compressed data in memory increasing the data access rates. The VA Masking feature allows the use of part of the virtual address to store meta-data.  Realtime Application Data Integrity The Realtime Application Data Integrity feature helps applications safeguard against invalid, stale memory reference and buffer overflows. The first 4-bits if the Pointer can be used to store a version number and this version number is also maintained in the memory & cache lines. When a pointer accesses memory the hardware checks to make sure the two versions match. A SEGV signal is raised when there is a mismatch. This feature can be used by the Database, applications and the OS.  M7 Database In-Memory Query Accelerator The M7 chip also includes a In-Silicon Query Engines.  These accelerate tasks that work on In-Memory Columnar Vectors. Oracle In-Memory options stores data in Column Format. The M7 Query Engine can speed up In-Memory Format Conversion, Value and Range Comparisons and Set Membership lookups. This engine can work on Compressed data - this means not only are we accelerating the query performance but also increasing the memory bandwidth for queries.  SPARC Accelerated Program  At the Hotchips conference we also introduced the SPARC Accelerated Program to provide our partners and third part developers access to all the goodness of the M7's SPARC Application Acceleration features. Please get in touch with us if you are interested in knowing more about this program. 

    Read the article

  • Single Instance of Child Forms in MDI Applications

    - by Akshay Deep Lamba
    In MDI application we can have multiple forms and can work with multiple forms i.e. MDI childs at a time but while developing applications we don't pay attention to the minute details of memory management. Take this as an example, when we develop application say preferably an MDI application, we have multiple child forms inside one parent form. On MDI parent form we would like to have menu strip and tab strip which in turn calls other forms which build the other parts of the application. This also makes our application looks pretty and eye-catching (not much actually). Now on a first go when a user clicks a menu item or a button on a tab strip an application initialize a new instance of a form and shows it to the user inside the MDI parent, if a user again clicks the same button the application creates another new instance for the form and presents it to the user, this will result in the un-necessary usage of the memory. Therefore, if you wish to have your application to prevent generating new instances of the forms then use the below method which will first check if the the form is visible among the list of all the child forms and then compare their types, if the form types matches with the form we are trying to initialize then the form will get activated or we can say it will be bring to front else it will be initialize and set visible to the user in the MDI parent window. The method we are using: private bool CheckForDuplicateForm(Form newForm) { bool bValue = false; foreach (Form frm in this.MdiChildren) { if (frm.GetType() == newForm.GetType()) { frm.Activate(); bValue = true; } } return bValue; } Usage: First we need to initialize the form using the NEW keyword ReportForm ReportForm = new ReportForm(); We can now check if there is another form present in the MDI parent. Here, we will use the above method to check the presence of the form and set the result in a bool variable as our function return bool value. bool frmPresent = CheckForDuplicateForm(Reportfrm); Once the above check is done then depending on the value received from the method we can set our form. if (frmPresent) return; else if (!frmPresent) { Reportfrm.MdiParent = this; Reportfrm.Show(); } In the end this is the code you will have at you menu item or tab strip click: ReportForm Reportfrm = new ReportForm(); bool frmPresent = CheckForDuplicateForm(Reportfrm); if (frmPresent) return; else if (!frmPresent) { Reportfrm.MdiParent = this; Reportfrm.Show(); }

    Read the article

  • Google Analytics on Static Site Hosted by GAE

    - by Cody Hess
    I finagled hosting a static site on Google App Engine at http://corbyhaas.com The HTML when visiting the URL shows some meta information and a frame to the site's actual address: http://cody-static-sites.appspot.com/corbyhaas which has the content. This is done automagically by Google App Engine. I've set up Google Analytics by including their script in my index.html, but the report shows 100% of visits coming from referring site "corbyhaas.com", which is useless information. Has anyone set up Google Analytics for a static GAE site? Is there a setting in my Analytics dashboard I can tweak, or is this a hazard of using Google App Engine for static content? Also, while it's not relevant here (but could be for future sites), does GAE's method of showing only meta information with frames for static data affect SEO?

    Read the article

  • CodePlex Daily Summary for Monday, July 01, 2013

    CodePlex Daily Summary for Monday, July 01, 2013Popular ReleasesQuickMon: Version 2.10.3: Mainly just a service release - no major changes. Toolbar buttons on main and config window can now be re-arrange (using ALT key) Added property to disable corrective scriptsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Roadkill - .NET Wiki engine: Roadkill v1.7: New features in 1.7: New file manager: Multiple file uploads Drag and drop uploads Delete folders (admins only) Delete files (admins only) (Experimental) Syntaxhighlighting custom variable (using https://github.com/alexgorbatchev/SyntaxHighlighter) - use [[[code lang=c#|your code here]]] (Experimental) MathJax custom variable - use [[[Mathjax]]] and $$your tex$$ on the page. Improved black bar theme Site speed improvements for Javascript/CSS files - now just two files files ea...Download Sharepoint Solution package: Release 4: version updated for SP2013WinRT XAML Toolkit: WinRT XAML Toolkit - 1.5: WinRT XAML Toolkit based on the Windows 8.0 and 8.1 Preview SDKs. Do not download the source code from here if you are looking for latest updates! You can download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Composition library for visual tree rende...Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsNew ProjectsAerCloud.net Client - Java, Linux & Windows: This project source code provides a step by step guide for using AerCloud.net Framework as a Service API. For more information please visit http://www.aercloudAmiClient – Asterisk Manager Interface (AMI) client based on the Rx Framework: Asterisk Manager Interface (AMI) client based on the Rx Frameworkbaidupan: cdcddddC#??????: C#??????ImageHelper: imagehelperIP switcher: IP switcher is a simple tool for switching settings, and store presets, on networkadapters.MastersProject: A MS project with a goal of creating a fully Code Contracts verified physics engine and a relatively simple game that uses it.Multiplatform card game: Example multipatform project.PhoneTools: A collection of tools designed to help developers create beautiful Windows Phone 8 apps.rodidexter: lllSharePoint 2013 List Item Encryption: This coding exercise project enables you to encrypt/decrypt list item text field in the browser using industry standard algorithms.tvaSoft: simulation, rotor dynamics, Finite Element Analisys, FEM, ODE, torsional vibration, flexural vibrationX3DML Project: X3DML is an xml-based markup language that defines rules for modeling 3D scenes from a tag-based document. It may be usefull in 3D web design and VR.zhuang-tfs: zhuang tfs

    Read the article

  • Extending QuickBooks Reporting with the QuickBooks ADO.NET Data Provider

    - by dataintegration
    The ADO.NET Provider for QuickBooks comes with several reports you may request from QuickBooks by default. However, there are many more that are not readily available. The ADO.NET Provider for QuickBooks makes it easy for you to create new reports and customize existing ones. In this article, we will illustrate how to create your own report and retrieve it from the Server Explorer in Visual Studio. For this example we will show how to create an Item Profitability Report. Creating the report script file Step 1: Download the sample reports available here. Extract them to a folder of your choice. Step 2: Make a copy of the ReportGeneralSummary.rsd file and rename it to ItemProfitability.rsd. Then open the file in any text editor. Step 3: Open the installation directory of the ADO.NET Provider for QuickBooks. Under the \db\ folder, locate the ReportJob.rsb file. Open this file in another text editor. Note: Although we are using ReportJob.rsb for this example, other reports may be contained in other Report*.rsb files. We recommend consulting the included help file and first locating the Report stored procedure and ReportType you are looking for. Otherwise, you may open each Report*.rsb file and look under the "reporttype" input for the report you are attempting to create. Step 4: First, let's rename the title of ItemProfitability.rsd. Near the top of the file you will see a title and description. Change the title to match the name of the file. Change the description to anything you like. For example: <rsb:info title="ItemProfitability" description="Executes my custom report."> Just below the Title, there are a number of columns. The Id represents the row number. The RowType represents the type of data returned by QuickBooks. The ColumnValue* columns represent all of the column data returned by QuickBooks. In some instances, we may need to add additional ColumnValue columns. Step 5: To add additional ColumnValue columns, simply copy the last column, paste it directly below, and continue increasing the numerical value at end of the attribute name. For example: <attr name="ColumnValue9" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue10" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue11" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue12" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> ... Caution: Do not rename the ColumnValue* definitions themselves. They are generalized so that we can understand each type of report returned by QuickBooks. Renaming them to something other than ColumnValue* will cause your columns to return with null values. Step 6: Now let's update the available inputs for the table. From the ReportJob.rsb file, copy all of the input elements into ItemProfitability under the "Psuedo-Column definitions" comment. You will be replacing the existing input elements in ItemProfitability with inputs from ReportJob. When you are done, it should look like this: <!-- Psuedo-Column definitions --> <input name="reporttype" description="The type of the report." value="ITEMESTIMATESVSACTUALS,ITEMPROFITABILITY,JOBESTIMATESVSACTUALSDETAIL,JOBESTIMATESVSACTUALSSUMMARY,JOBPROFITABILITYDETAIL,JOBPROFITABILITYSUMMARY," default="ITEMESTIMATESVSACTUALS" /> <input name="reportperiod" description="Report date range in the format (fromdate:todate), and either value may be omitted for an open ended range (e.g. 2009-12-25:). Supported date format: yyyy-MM-dd." /> <input name="reportdaterangemacro" description="Use a predefined date range." value="ALL,TODAY,THISWEEK,THISWEEKTODATE,THISMONTH,THISMONTHTODATE,THISQUARTER,THISQUARTERTODATE,THISYEAR,THISYEARTODATE,YESTERDAY,LASTWEEK,LASTWEEKTODATE,LASTMONTH,LASTMONTHTODATE,LASTQUARTER,LASTQUARTERTODATE,LASTYEAR,LASTYEARTODATE,NEXTWEEK,NEXTFOURWEEKS,NEXTMONTH,NEXTQUARTER,NEXTYEAR," default="ALL" /> ... Step 7: Now let's update the operationname attribute. This needs to match the same operationname used by ReportJob. After you have copied the correct value from ReportJob.rsb, the operationname in ItemProfitability should look like so: <rsb:set attr="operationname" value="qbReportJob"/> Step 8: There is one more thing we can do to make this a true Item Profitability report. We can remove the reporttype input and hardcode the value. To do this, copy and paste the rsb:set used for operationname. Then rename the attr and value to match the name and value you want to use. For example: <rsb:set attr="operationname" value="qbReportJob"/> <rsb:set attr="reporttype" value="ITEMPROFITABILITY"/> After this you can remove the input for reporttype. Now that you have your own report file, we can move on to displaying the report in the Visual Studio server explorer. Accessing the report through the Data Provider Step 1: Open Visual Studio. In the Server Explorer, configure a new connection with the QuickBooks Data Provider. Step 2: For the Location connection string property, enter the directory where the new report has been saved to. Step 3: The new report should appear as a new view in the Server Explorer. Let's retrieve data from it. Step 4: You can specify any inputs in the WHERE clause. New Report Example Script To help you get started using this new QuickBooks Data Provider report, you will need to download the QuickBooks ADO.NET Data Provider and the fully functional sample script.

    Read the article

  • Best in-memory cache of DB objects for Silverlight [closed]

    - by Jon
    Hi, I'd like to set up a cache of database objects (i.e. rows in a table) in memory in silverlight, which I'll do using WCF and linq-to-sql. Once I have the objects in memory, I'm planning on using MSMQ to receive new objects whenever they have been modified. It's a somewhat complex approach but the goal is to reduce trips to the database and allow instant data communication between Silverlight applications that are connected to the MSMQ. My Silverlight applications are meant to be long-running and the amount of data to be cached will not be large. I'm planning on saving the in-memory cache using local storage. Anyway, in order to process the updated objects that come in, I'd like to know if the user has changed the existing object. Could I use some event relating to data-binding to set a flag indicating that the object has changes? Maybe there's a better way to do the cache entirely? Thanks!

    Read the article

  • Visualize flowchart diagram with multiple end symbols

    - by platzhirsch
    I am looking for a standardize way to visualize the following hierarchical logic: The state of the thread is represented by the answers to the hierarchical set of question You can read this listing like a flowchart, you iterate over the questions decide, go one step deeper and so on. Therefore I thought the best way to visualize it, using a flowchart. The problem is, in this hierarchical set it is possible to end in more than one state and its totally valid. I have never seen a flowchart where you can enter more than one state. Is it still possible and I am missing the right symbol to present this logic or are flowchart not fitting anyway? What other graphical representation could I use, is there something fitting in UML? A non-deterministic state machine seems not to be intuitive enough, transfering it into a deterministic state machine would result in to many states, and so on.

    Read the article

  • .NET Security Part 2

    - by Simon Cooper
    So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

    Read the article

  • SharePoint, HTTP Modules, and Page Validation

    - by Damon Armstrong
    Sometimes I really believe that SharePoint actively thwarts my attempts to get it to do what I want.  First you look at something and say, wow, that should work.  Then you realize it doesn’t.  Then you have an epiphany and see a workaround.  And when you almost have that work around working… well then SharePoint says no again.  Then it’s off on another whirl-wind adventure to find a work around for the workaround.  I had one of those issues today, but I think I finally got past the last roadblock. So, I was writing an HTTP module as a workaround for another problem.  Everything looked like it was working great because I had been slowly adding code into the HTTP module bit by bit in a prototyping effort.  Finally I put in the last bit of code in place… and I started to get an error: “The security validation for this page is invalid. Click Back in your Web browser, refresh the page, and try your operation again.” This is not an uncommon error – it normally occurs when you are updating an item on a GET request and you have not marked the web containing the item with AllowUnsafeUpdates.  One issue, however, is that I wasn’t updating anything in my code.  I was, however, getting an SPWeb object so I decided to set the AllowUnsafeUpdates property on it to true for good measure. Once that was in place, I ran it again… “The security validation for this page is invalid. Click Back in your Web browser, refresh the page, and try your operation again.” WTF?!?!  I really expected that setting the AllowUnsafeUpdates property on the SPWeb would fix the issue, but clearly that was not the case.  I have had occasion to disassemble some SharePoint code with .NET Reflector in the past, and one of the things SharePoint abuses a bit more than it should is the HttpContext.  One way to avoid this abuse is to clear out the HttpContext while your code runs and then set it back once you are done.  I tried this next, and everything worked out just like I had expected.  So, if you are building an HTTP Module for SharePoint and some code that you are running ends up giving you a security validation error, remember to try running that code with AllowUnsafeUpdates turned on and try running the code with the HttpContext nulled out (just remember to set it back after your code runs or else you’ll really jack things up).

    Read the article

  • A WPF Image Button

    - by psheriff
    Instead of a normal button with words, sometimes you want a button that is just graphical. Yes, you can put an Image control in the Content of a normal Button control, but you still have the button outline, and trying to change the style can be rather difficult. Instead I like creating a user control that simulates a button, but just accepts an image. Figure 1 shows an example of three of these custom user controls to represent minimize, maximize and close buttons for a borderless window. Notice the highlighted image button has a gray rectangle around it. You will learn how to highlight using the VisualStateManager in this blog post.Figure 1: Creating a custom user control for things like image buttons gives you complete control over the look and feel.I would suggest you read my previous blog post on creating a custom Button user control as that is a good primer for what I am going to expand upon in this blog post. You can find this blog post at http://weblogs.asp.net/psheriff/archive/2012/08/10/create-your-own-wpf-button-user-controls.aspx.The User ControlThe XAML for this image button user control contains just a few controls, plus a Visual State Manager. The basic outline of the user control is shown below:<Border Grid.Row="0"        Name="borMain"        Style="{StaticResource pdsaButtonImageBorderStyle}"        MouseEnter="borMain_MouseEnter"        MouseLeave="borMain_MouseLeave"        MouseLeftButtonDown="borMain_MouseLeftButtonDown">  <VisualStateManager.VisualStateGroups>  ... MORE XAML HERE ...  </VisualStateManager.VisualStateGroups>  <Image Style="{StaticResource pdsaButtonImageImageStyle}"         Visibility="{Binding Path=Visibility}"         Source="{Binding Path=ImageUri}"         ToolTip="{Binding Path=ToolTip}" /></Border>There is a Border control named borMain and a single Image control in this user control. That is all that is needed to display the buttons shown in Figure 1. The definition for this user control is in a DLL named PDSA.WPF. The Style definitions for both the Border and the Image controls are contained in a resource dictionary names PDSAButtonStyles.xaml. Using a resource dictionary allows you to create a few different resource dictionaries, each with a different theme for the buttons.The Visual State ManagerTo display the highlight around the button as your mouse moves over the control, you will need to add a Visual State Manager group. Two different states are needed; MouseEnter and MouseLeave. In the MouseEnter you create a ColorAnimation to modify the BorderBrush color of the Border control. You specify the color to animate as “DarkGray”. You set the duration to less than a second. The TargetName of this storyboard is the name of the Border control “borMain” and since we are specifying a single color, you need to set the TargetProperty to “BorderBrush.Color”. You do not need any storyboard for the MouseLeave state. Leaving this VisualState empty tells the Visual State Manager to put everything back the way it was before the MouseEnter event.<VisualStateManager.VisualStateGroups>  <VisualStateGroup Name="MouseStates">    <VisualState Name="MouseEnter">      <Storyboard>        <ColorAnimation             To="DarkGray"            Duration="0:0:00.1"            Storyboard.TargetName="borMain"            Storyboard.TargetProperty="BorderBrush.Color" />      </Storyboard>    </VisualState>    <VisualState Name="MouseLeave" />  </VisualStateGroup></VisualStateManager.VisualStateGroups>Writing the Mouse EventsTo trigger the Visual State Manager to run its storyboard in response to the specified event, you need to respond to the MouseEnter event on the Border control. In the code behind for this event call the GoToElementState() method of the VisualStateManager class exposed by the user control. To this method you will pass in the target element (“borMain”) and the state (“MouseEnter”). The VisualStateManager will then run the storyboard contained within the defined state in the XAML.private void borMain_MouseEnter(object sender,  MouseEventArgs e){  VisualStateManager.GoToElementState(borMain,    "MouseEnter", true);}You also need to respond to the MouseLeave event. In this event you call the VisualStateManager as well, but specify “MouseLeave” as the state to go to.private void borMain_MouseLeave(object sender, MouseEventArgs e){  VisualStateManager.GoToElementState(borMain,     "MouseLeave", true);}The Resource DictionaryBelow is the definition of the PDSAButtonStyles.xaml resource dictionary file contained in the PDSA.WPF DLL. This dictionary can be used as the default look and feel for any image button control you add to a window. <ResourceDictionary  ... >  <!-- ************************* -->  <!-- ** Image Button Styles ** -->  <!-- ************************* -->  <!-- Image/Text Button Border -->  <Style TargetType="Border"         x:Key="pdsaButtonImageBorderStyle">    <Setter Property="Margin"            Value="4" />    <Setter Property="Padding"            Value="2" />    <Setter Property="BorderBrush"            Value="Transparent" />    <Setter Property="BorderThickness"            Value="1" />    <Setter Property="VerticalAlignment"            Value="Top" />    <Setter Property="HorizontalAlignment"            Value="Left" />    <Setter Property="Background"            Value="Transparent" />  </Style>  <!-- Image Button -->  <Style TargetType="Image"         x:Key="pdsaButtonImageImageStyle">    <Setter Property="Width"            Value="40" />    <Setter Property="Margin"            Value="6" />    <Setter Property="VerticalAlignment"            Value="Top" />    <Setter Property="HorizontalAlignment"            Value="Left" />  </Style></ResourceDictionary>Using the Button ControlOnce you make a reference to the PDSA.WPF DLL from your WPF application you will see the “PDSAucButtonImage” control appear in your Toolbox. Drag and drop the button onto a Window or User Control in your application. I have not referenced the PDSAButtonStyles.xaml file within the control itself so you do need to add a reference to this resource dictionary somewhere in your application such as in the App.xaml.<Application.Resources>  <ResourceDictionary>    <ResourceDictionary.MergedDictionaries>      <ResourceDictionary         Source="/PDSA.WPF;component/PDSAButtonStyles.xaml" />    </ResourceDictionary.MergedDictionaries>  </ResourceDictionary></Application.Resources>This will give your buttons a default look and feel unless you override that dictionary on a specific Window or User Control or on an individual button. After you have given a global style to your application and you drag your image button onto a window, the following will appear in your XAML window.<my:PDSAucButtonImage ... />There will be some other attributes set on the above XAML, but you simply need to set the x:Name, the ToolTip and ImageUri properties. You will also want to respond to the Click event procedure in order to associate an action with clicking on this button. In the sample code you download for this blog post you will find the declaration of the Minimize button to be the following:<my:PDSAucButtonImage       x:Name="btnMinimize"       Click="btnMinimize_Click"       ToolTip="Minimize Application"       ImageUri="/PDSA.WPF;component/Images/Minus.png" />The ImageUri property is a dependency property in the PDSAucButtonImage user control. The x:Name and the ToolTip we get for free. You have to create the Click event procedure yourself. This is also created in the PDSAucButtonImage user control as follows:private void borMain_MouseLeftButtonDown(object sender,  MouseButtonEventArgs e){  RaiseClick(e);}public delegate void ClickEventHandler(object sender,  RoutedEventArgs e);public event ClickEventHandler Click;protected void RaiseClick(RoutedEventArgs e){  if (null != Click)    Click(this, e);}Since a Border control does not have a Click event you will create one by using the MouseLeftButtonDown on the border to fire an event you create called “Click”.SummaryCreating your own image button control can be done in a variety of ways. In this blog post I showed you how to create a custom user control and simulate a button using a Border and Image control. With just a little bit of code to respond to the MouseLeftButtonDown event on the border you can raise your own Click event. Dependency properties, such as ImageUri, allow you to set attributes on your custom user control. Feel free to expand on this button by adding additional dependency properties, change the resource dictionary, and even the animation to make this button look and act like you want.NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “A WPF Image  Button” from the drop down list.

    Read the article

  • Webmaster Tools - URL Parameters Settings Do Not Work

    - by David
    Google Webmaster Tools shows problems with duplicate title tags under Optimization - HTML Improvements, for example: ???????? Mitsubishi Electric Mr. Slim PC Series PC-3KAKLT (220V) 30000 BTU > /????-????/mitsubishi-mr-slim-pc3kaklt-30000-btu.html > /????-????/mitsubishi-mr-slim-pc3kaklt-30000-btu.html?category_id=96 These two pages have exactly the same content, a rel-canonical tag is set, and they are (no longer) linked to internally. Additionally, we used the Configuration - URL Parameters setting, to set this parameter to No: Doesn't affect page content about one month ago. However, Google is still showing these HTML improvements (and rankings dropped dramatically). What else can we do here? Best, David

    Read the article

  • Failed to compile Network Manager 0.9.4

    - by Oleksa
    After upgrading to 12.04 I needed to re-compile Network Manager to the version 0.9.4.0 again. However with the version 9.4.0 I faced with the error during compilation with libdns-manager: $ make ... Making all in dns-manager make[4]: ????? ? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src/dns-manager" /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-manager.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-manager.Tpo -c -o libdns_manager_la-nm-dns-manager.lo `test -f 'nm-dns-manager.c' || echo './'`nm-dns-manager.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-manager.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-manager.Tpo -c nm-dns-manager.c -fPIC -DPIC -o .libs/libdns_manager_la-nm-dns-manager.o mv -f .deps/libdns_manager_la-nm-dns-manager.Tpo .deps/libdns_manager_la-nm-dns-manager.Plo /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-dnsmasq.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-dnsmasq.Tpo -c -o libdns_manager_la-nm-dns-dnsmasq.lo `test -f 'nm-dns-dnsmasq.c' || echo './'`nm-dns-dnsmasq.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/logging -I../../libnm-util -I../../libnm-util -I../../src -I../../include -I../../include -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/libnl3 -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -pthread -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -DLOCALSTATEDIR=\"/usr/local/var\" -Wall -std=gnu89 -g -O2 -Wshadow -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wfloat-equal -Wno-unused-parameter -Wno-sign-compare -fno-strict-aliasing -Wno-unused-but-set-variable -Wundef -Werror -MT libdns_manager_la-nm-dns-dnsmasq.lo -MD -MP -MF .deps/libdns_manager_la-nm-dns-dnsmasq.Tpo -c nm-dns-dnsmasq.c -fPIC -DPIC -o .libs/libdns_manager_la-nm-dns-dnsmasq.o nm-dns-dnsmasq.c: In function 'update': nm-dns-dnsmasq.c:274:2: error: passing argument 1 of 'g_slist_copy' discards 'const' qualifier from pointer target type [-Werror] /usr/include/glib-2.0/glib/gslist.h:82:10: note: expected 'struct GSList *' but argument is of type 'const struct GSList *' cc1: all warnings being treated as errors make[4]: *** [libdns_manager_la-nm-dns-dnsmasq.lo] ??????? 1 make[4]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src/dns-manager" make[3]: *** [all-recursive] ??????? 1 make[3]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src" make[2]: *** [all] ??????? 2 make[2]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0/src" make[1]: *** [all-recursive] ??????? 1 make[1]: ??????? ??????? "/home/stasevych/install/network-manager/nm0.9.4.0/network-manager-0.9.4.0" make: *** [all] ??????? 2 Has anybody faced with the similar errors? Thank you in advance for your help.

    Read the article

  • Entity Framework Code First: Get Entities From Local Cache or the Database

    - by Ricardo Peres
    Entity Framework Code First makes it very easy to access local (first level) cache: you just access the DbSet<T>.Local property. This way, no query is sent to the database, only performed in already loaded entities. If you want to first search local cache, then the database, if no entries are found, you can use this extension method: 1: public static class DbContextExtensions 2: { 3: public static IQueryable<T> LocalOrDatabase<T>(this DbContext context, Expression<Func<T, Boolean>> expression) where T : class 4: { 5: IEnumerable<T> localResults = context.Set<T>().Local.Where(expression.Compile()); 6:  7: if (localResults.Any() == true) 8: { 9: return (localResults.AsQueryable()); 10: } 11:  12: IQueryable<T> databaseResults = context.Set<T>().Where(expression); 13:  14: return (databaseResults); 15: } 16: }

    Read the article

  • Deleting old tomcat version and setting a new one

    - by Diego
    I had Apache Tomcat installed by apt-get, however I decided to get a newer one, performed apt-get remove tomcat7 and apt-get purge tomcat7. I installed a newer one means the bundled Tomcat Server in NetBeans install. However, Im still seeing the old fashioned page from former Tomcat install: It works ! If you're seeing this page via a web browser, it means you've setup Tomcat successfully. Congratulations! This is the default Tomcat home page. It can be found on the local filesystem at: /var/lib/tomcat7/webapps/ROOT/index.html I already set a different port in the server.xml file and whenever I go that site after executing the startup.sh file with sudo permissions I'm not getting any site like server (new one) isn't running. How can I still be getting the page from old Tomcat install!? When I execute the startup.sh log says all is set OK, so why isn't it working?

    Read the article

  • AWStats configuration issue [on hold]

    - by Dan
    I have a an Ubuntu 12.04.2 LTS server in which i host my website. The website is in Drupal. I tried to set up AWStats for my website but it is giving a lot of problems. I followed this link - http://www.sysadminworld.com/2011/set-up-awstats-on-ubuntu/ But I am confused about the domain name that needs to be given. The website can be accessed from http://xyz.com but the actual link is http://xyz.abc-def.com/root-folder. What is the domain name in this case? So what should be the name of the conf file then?

    Read the article

  • Triple-head on a Lenovo T520

    - by codeape
    Lenovo T520 with integrated Intel HD graphics + a NVidia card (Optimus) Ubuntu 11.10 on the computer. I would like to use the built-in screen plus two external screens. This PDF indicates that it is possible to connect up to four external monitors to the laptop. The information is Windows only. I was planning to disable the NVidia card, since I have read that Linux support for Optimus is not good. Questions: Has anyone set up three monitors on NVidia hardware? Has anyone set up three monitors using Intel HD 3000? Can I expect it to work out of the box, or are there tricks I need to be aware of?

    Read the article

  • CodePlex Daily Summary for Monday, May 17, 2010

    CodePlex Daily Summary for Monday, May 17, 2010New Projects.NET Essentials Course: .NET Essentials course @ Telerik Academy Training project for the studentsAU/NZ Office 2010 Launch Demos: The AU/NZ Office 2010 Launch Demos are a collection of code samples that were used as part of the Office/SharePoint 2010 launch parties in Australi...CybennyCMS: Very simple CMS system for building sites with ASP.NET with templates for lay-out, content pages with only html content and a xml file for the site...essionPIM: essionPIMGIStance: A library for finding "nearest neighbor" among an in-memory set of positions, in C# and F#. A radius must be specified for making a meaningful s...IP Informer: IP Informer is IP Informer.Kurumsal Ofis Paketi: Kurumsal Ofis Paketi (KOP), Microsoft Ofis 2010 ürünleri için geliştirilmiş eklenti yazılımıdır. KOP, Word ve Excel’de bulunan işlevlerinin genişle...Mockup to XAML: Convert Balsamiq Mockups to XAML. This project supports BMML mockup control conversion using plugins. A standard set of controls are included wit...Open XML Validator: This WPF app give you a brief resume about errors in your Open XML documents.Paint.NET Bulk Image Processor: PDNBulkUpdater is a plug-in for Paint.NET that allows you to efficiently perform operations such as resizing and converting multiple images at the ...PiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统Roleplay character generator: The roleplay character generator allows the creation of characters for different roleplaying gamesSharePoint User Search WebParts: This project contains SharePoint webparts which provide advanced search configuration and experience for SharePoint 2007. It will be upgrade in few...Spodi: Spodi is created on 22-04-2010TfsPolicyPack: This project will provide a few checkin policies for VS 2010.vccodesandobx: vccodesandobxvccodesandobxvccodesandobxWhiteNile: test project using codeplexNew ReleasesAnimeStore.Net: 1.0.3.0: Build 1.0.3.0 Changes Move some functionality to features (MEF) Filter / Search functionality. Anime hard-copy records storage (e.g Disk Storage ...AU/NZ Office 2010 Launch Demos: Twitter map web part: This is the main twitter map web part download, see the Twitter Map web part page for all the information.Blueset Studio Opensource Projects: 推来: 稳定版本BUtil: BUtil 5.0 Alpha2: The initial implementation of multitasking (except ghost)CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta: Beta 2 is released here: url http://cassinidev.codeplex.com/releases/view/45456 New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. ...CBM-Command: 2010-05-16: Release Notes - 2010-05-16New Features New navigation options: Page Up, Page Down, Top of Directory, Bottom of Directory. See documentation (http:...CCNet Conditional Plugin: CCNet Conditional for CCNet 1.5: A (quick) build of the plugin for CCNet 1.5 to fix the 17365 bug reported by Beakster. This also adds a new condition "timeCondition"CybennyCMS: Cybenny CMS beta 1: The first beta. Includes a small demo site.Data Extracting SDK: Data Extracting SDK v.1.1 RTM: RTM version of Data Extracting SDK.Duckworth Lewis Professional Edition Calculator: DLcalc 2.0: This software can perform all D/L calculations 100% accurately. From version 2.0 onwards, tables for par scores can also be produced.EPiServer CMS Page Type Builder: Page Type Builder 1.2: Release notes can be found in this blog post.Floe IRC Client: Floe IRC Client 2010-05 R5: - Many new context menu options for @s - Ability to select multiple users in the nick list for some operations (kick, ban) - Bunch of minor bug fix...Graffiti CMS Events Plugin: Version 1.0.1: Minor update to previous version to fix bug where deleted posts were still showing in the calendar.Microsoft Research Boogie: 2010-05-16: Binary release of Boogie and Dafny. (Note, Chalice is not pre-built as part of this binary release. To obtain it, you need to build it yourself f...MSBuild Launch Pad (mPad): 1.0 Beta 2: Basic support for sln, csproj, vbproj, vcxproj, shfbproj, ccproj, oxygene and proj files are added. Basic settings (Show Prompt, and Auto Hide) are...Multi-Language Words Memorizer: Memorizer 1.1: Issues fix, XML db update with new words.NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.1: New release of NShader! New : - a Visual Studio 2010 port can be installed through the new extension manager : you just have to download NShaderV...PHPExcel: PHPExcel 1.7.3 Production: Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also add your name / company on our Donati...Rollback - A social backup tool.: Rollback Setup 0.5.1.2 Build 48360: Bug fixes for backing up files which are hidden/system. Changes to make builds on 64 bit Windows 7 using VS 2010 Express edition.Rollback - A social backup tool.: Rollback Setup 0.5.1.3: Updated version number.Shake - C# Make: Shake v0.1.20: New: Simple console logger Changes: Command line params helper writes out syntax and samples (like msbuild) Fixes: Assembly info, file task and r...SharePoint User Search WebParts: v0.1 Friendly MOSS 2007 Search WebPart: Very first version of this webpart. A more stabilized version will follow in few days.Team Deploy: Team Deploy 2010 Beta 1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comp...Team Foundation Server Administration Tool: 2.0: TFS Administration Tool 2.0 TFS Administration Tool 2.0 is built on top of the Team Foundation Server 2008 object model and in order to connect to...The Ping Master: v0.9.0.0: Installer for The Ping Master binariesUseful Office Macros: All Macro Downloads: Please find above the downloads related to this project. Each Excel Workbook below works independently of the others, so you only need to download...VCC: Latest build, v2.1.30516.0: Automatic drop of latest buildVisual Studio DSite: Advanced Digital Board Game (Visual C++ 2008): An advanced digital board game made in visual c 2008.YUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool Full Version: Version 1.0 The following changes have been made: Merged classes to automatically sense if the target file is Javascript or CSS. Cleaned up setu...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelBlogEngine.NETRawrMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersDotNetZip LibraryCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell Extensions

    Read the article

  • ADDS: 1 - Introducing and designing

    - by marc dekeyser
    Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} What is ADDS?  Every Microsoft oriented infrastructure in today's enterprises will depend largely on the active directory version built by Microsoft. It is the foundation stone on which all other products (Exchange, update services, office communicator, the system center family, etc) rely on to get their information. And that is just looking at it from an infrastructure perspective. A well designed and implemented Active Directory implementation makes life for IT personnel and user alike a lot easier. Centralised management and the abilities opened up  by having it in place are ample.  But what is Active Directory Domain Services? We can look at ADDS as a centralised directory containing all objects your infrastructure runs on in one way or another. Since it is a Microsoft product you'll obviously not be seeing linux or mac clients listed in here (exceptions exist) but in general we can say it contains everything your company has in place in one form or another.  The domain name services. The domain naming service (or DNS for short) is a service which translates IP address (the identifiers for each computer in your domain) into readable and easy to understand names. This service is a prequisite for ADDA to work and having wrong record in a DNS server will make any ADDS service fail. Generally speaking a DNS service will be run on the same server as the ADDS service but it is worth wile to remember that this is not necessary. You could, for example, run your DNS services on a linux box (which would need special preparing to host an ADDS integrated DNS zone) and run the ADDS service of another box… Where to start? If the aim is to put in place a first time implementation of ADDS in your enterprise there are plenty of things to consider depending on what you are going to do in the long run. Great care has to be taken when first designing and implementing as having it set up wrong will cause a headache down the line. It is for that reason that I like to start building from the bottom up and start with a generic installation of ADDS (which will still differ for every client) and make it adaptable for future services which can hook in to the existing environment. Adapting existing environments is out of scope for this document (and series) although it is possible to take the pointers and change your existing environment to run in a smoother manor. Take great care when changing things as one small slip of the hand can give you a forest wide failure… Whenever starting with an ADDS deployment I ask the client the following questions:  What are your long term plans and goals?  How flexible do you want it? Are you currently linux heavy and want to keep this or can we go for an all Microsoft design? Those three questions should give some sort of indicator what direction can be taken and if the client has thought about some things themselves :).  The technical side of things  What is next to consider is what kind of infrastructure is already in place. For these series I'll keep it simple and introduce some general concepts without going in to depth on integrating ADDS with other DNS services.  Building from the ground up means we need to consider our layers on which our infrastructure will rely. In my view that goes as follows:  Network (WAN/LAN links and physical sites DNS Namespacing All in one domain or split up in different domains/forests? Security (both for ADDS and physical sites) The network side of things  Looking at how the network is currently set up can potentially teach us a large deal about the client. Do they have multiple physical site? What network speeds exist between these sites, etc… Depending on this information we will design our site links (which controls replication) in future stages. DNS Namespacing Maybe the single most intresting thing to know is what the domain will be named (ADDS will need a DNS domain with the same name) and where this will be hosted. Note that active directory can be set up with a singe name (aka contoso instead of contoso.com) but it is highly recommended to never do this. If you do end up with a domain like that for some reason there will be a lot of services that are going to give you good grief in the future (exchange being one of them). So one of the best practises would be always to use a double name (contoso.com or contoso.lan for example). Internal namespace A single namespace is just what it sounds like. You have a DNS domain which is different internally from what the client has as an external namespace. f.e. contoso.com as an external name (out on the internet) and contoso.lan on the internal network. his setup is has its advantages in that you have more obscurity from the internet in the DNS side of this but it will require additional work to publish services to the web. External namespace Quite like the internal namespace only here you do not differ the internal namespace of the company from what is known on the internet. In this implementation you would host your own DNS servers for the external domain inside the network. Or in other words, any external computer doing a DNS lookup would contact your internal DNS server for the resolution. Generally speaking this set up is a bad idea from the security side of things. Split DNS Whilst using an external namespace design is fairly easy it involves a lot of security risks. Opening up you ADDS DSN servers for lookups exposes your entire network to the internet and should be avoided at any cost. And that is where the "split DNS" design comes in. In this setup up would still have the same namespace internally and externally but you would be using different DNS servers for lookups on the external network who have no records of your internal resources unless you explicitly publish them. All in one or not? In determining your active directory design you can look at the following possibilities:  Single forest, Single domain Single forest, multiple domains Multiple forests, multiple domains I've listed the possibilities for design in increasing order of administrative magnitude. Microsoft recommends trying to use a single forest, single domain in as much situations as possible. It is, however, always possible that you require your services to be seperated from your users in a resource forest with trusts set up between the different forests. To start out I would go with the single forest design to avoid complexity unless there are strict requirements to have multiple forests. Security What kind of security is required on the domain and does this reflect the physical security on the sites? Not every client can afford to have a domain controller in a secluded server room on every site and it is exactly for that reason that Microsoft introduced the RODC (read only domain controller). A RODC is a domain controller that has been limited in functionality, in essence it will only cache the data you explicitly tell it to cache and in the case of a DC compromise (it being stolen) only a limited number of accounts will need to be affected. Th- Th- Th- That’s all folks! Well at least for now! In future editions of this series we’ll be walking through the different task that need to be done and the thought which needs to be put in to it. But for all editions we’ll be going from the concept of running a single forest, single domain with a split DNS setup… See you next time!

    Read the article

  • Simple Preferred time control using silverlight 3.

    - by mohanbrij
    Here I am going to show you a simple preferred time control, where you can select the day of the week and the time of the day. This can be used in lots of place where you may need to display the users preferred times. Sample screenshot is attached below. This control is developed using Silverlight 3 and VS2008, I am also attaching the source code with this post. This is a very basic example. You can download and customize if further for your requirement if you want. I am trying to explain in few words how this control works and what are the different ways in which you can customize it further. File: PreferredTimeControl.xaml, in this file I have just hardcoded the controls and their positions which you can see in the screenshot above. In this example, to change the start day of the week and time, you will have to go and change the design in XAML file, its not controlled by your properties or implementation classes. You can also customize it to change the start day of the week, Language, Display format, styles, etc, etc. File: PreferredTimeControl.xaml.cs, In this control using the code below, first I am taking all the checkbox from my form and store it in the Global Variable, which I can use across my page. List<CheckBox> checkBoxList; #region Constructor public PreferredTimeControl() { InitializeComponent(); GetCheckboxes();//Keep all the checkbox in List in the Load itself } #endregion #region Helper Methods private List<CheckBox> GetCheckboxes() { //Get all the CheckBoxes in the Form checkBoxList = new List<CheckBox>(); foreach (UIElement element in LayoutRoot.Children) { if (element.GetType().ToString() == "System.Windows.Controls.CheckBox") { checkBoxList.Add(element as CheckBox); } } return checkBoxList; } Then I am exposing the two methods which you can use in the container form to get and set the values in this controls. /// <summary> /// Set the Availability on the Form, with the Provided Timings /// </summary> /// <param name="selectedTimings">Provided timings comes from the DB in the form 11,12,13....37 /// Where 11 refers to Monday Morning, 12 Tuesday Morning, etc /// Here 1, 2, 3 is for Morning, Afternoon and Evening respectively, and for weekdays /// 1,2,3,4,5,6,7 where 1 is for Monday, Tuesday, Wednesday, Thrusday, Friday, Saturday and Sunday respectively /// So if we want Monday Morning, we can can denote it as 11, similarly for Saturday Evening we can write 36, etc /// </param> public void SetAvailibility(string selectedTimings) { foreach (CheckBox chk in checkBoxList) { chk.IsChecked = false; } if (!String.IsNullOrEmpty(selectedTimings)) { string[] selectedString = selectedTimings.Split(','); foreach (string selected in selectedString) { foreach (CheckBox chk in checkBoxList) { if (chk.Tag.ToString() == selected) { chk.IsChecked = true; } } } } } /// <summary> /// Gets the Availibility from the selected checkboxes /// </summary> /// <returns>String in the format of 11,12,13...41,42...31,32...37</returns> public string GetAvailibility() { string selectedText = string.Empty; foreach (CheckBox chk in GetCheckboxes()) { if (chk.IsChecked == true) { selectedText = chk.Tag.ToString() + "," + selectedText; } } return selectedText; }   In my example I am using the matrix format for Day and Time, for example Monday=1, Tuesday=2, Wednesday=3, Thursday = 4, Friday = 5, Saturday = 6, Sunday=7. And Morning = 1, Afternoon =2, Evening = 3. So if I want to represent Morning-Monday I will have to represent it as 11, Afternoon-Tuesday as 22, Morning-Wednesday as 13, etc. And in the other way to set the values in the control I am passing the values in the control in the same format as preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); So this will set the checkbox value for Morning-Monday, Morning-Tuesday, Morning-Wednesday, Morning-Saturday, Afternoon of Tuesday and Afternoon of Wednesday. To implement this control, first I have to import this control in xmlns namespace as xmlns:controls="clr-namespace:PreferredTimeControlApp" and finally put in your page wherever you want, <Grid x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}"> <Border x:Name="ContentBorder" Style="{StaticResource ContentBorderStyle}"> <controls:PreferredTimeControl x:Name="preferredTimeControl"></controls:PreferredTimeControl> </Border> </Grid> And in the code behind you can just include this code: private void InitializeControl() { preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); } And you are ready to go. For more details you can refer to my code attached. I know there can be even simpler and better way to do this. Let me know if any other ideas. Sorry, Guys Still I have used Silverlight 3 and VS2008, as from the system I am uploading this is still not upgraded, but still you can use the same code with Silverlight 4 and VS2010 without any changes. May be just it will ask you to upgrade your project which will take care of rest. Download Source Code.   Thanks ~Brij

    Read the article

  • Predicting advantages of database denormalization

    - by Janus Troelsen
    I was always taught to strive for the highest Normal Form of database normalization, and we were taught Bernstein's Synthesis algorithm to achieve 3NF. This is all very well and it feels nice to normalize your database, knowing that fields can be modified while retaining consistency. However, performance may suffer. That's why I am wondering whether there is any way to predict the speedup/slowdown when denormalizing. That way, you can build your list of FD's featuring 3NF and then denormalize as little as possible. I imagine that denormalizing too much would waste space and time, because e.g. giant blobs are duplicated or it because harder to maintain consistency because you have to update multiple fields using a transaction. Summary: Given a 3NF FD set, and a set of queries, how do I predict the speedup/slowdown of denormalization? Link to papers appreciated too.

    Read the article

  • Inverted schedctl usage in the JVM

    - by Dave
    The schedctl facility in Solaris allows a thread to request that the kernel defer involuntary preemption for a brief period. The mechanism is strictly advisory - the kernel can opt to ignore the request. Schedctl is typically used to bracket lock critical sections. That, in turn, can avoid convoying -- threads piling up on a critical section behind a preempted lock-holder -- and other lock-related performance pathologies. If you're interested see the man pages for schedctl_start() and schedctl_stop() and the schedctl.h include file. The implementation is very efficient. schedctl_start(), which asks that preemption be deferred, simply stores into a thread-specific structure -- the schedctl block -- that the kernel maps into user-space. Similarly, schedctl_stop() clears the flag set by schedctl_stop() and then checks a "preemption pending" flag in the block. Normally, this will be false, but if set schedctl_stop() will yield to politely grant the CPU to other threads. Note that you can't abuse this facility for long-term preemption avoidance as the deferral is brief. If your thread exceeds the grace period the kernel will preempt it and transiently degrade its effective scheduling priority. Further reading : US05937187 and various papers by Andy Tucker. We'll now switch topics to the implementation of the "synchronized" locking construct in the HotSpot JVM. If a lock is contended then on multiprocessor systems we'll spin briefly to try to avoid context switching. Context switching is wasted work and inflicts various cache and TLB penalties on the threads involved. If context switching were "free" then we'd never spin to avoid switching, but that's not the case. We use an adaptive spin-then-park strategy. One potentially undesirable outcome is that we can be preempted while spinning. When our spinning thread is finally rescheduled the lock may or may not be available. If not, we'll spin and then potentially park (block) again, thus suffering a 2nd context switch. Recall that the reason we spin is to avoid context switching. To avoid this scenario I've found it useful to enable schedctl to request deferral while spinning. But while spinning I've arranged for the code to periodically check or poll the "preemption pending" flag. If that's found set we simply abandon our spinning attempt and park immediately. This avoids the double context-switch scenario above. One annoyance is that the schedctl blocks for the threads in a given process are tightly packed on special pages mapped from kernel space into user-land. As such, writes to the schedctl blocks can cause false sharing on other adjacent blocks. Hopefully the kernel folks will make changes to avoid this by padding and aligning the blocks to ensure that one cache line underlies at most one schedctl block at any one time.

    Read the article

  • SQL SERVER – NTFS File System Performance for SQL Server

    - by pinaldave
    Note: Before practicing any of the suggestion of this article, consult your IT Infrastructural Admin, applying the suggestion without proper testing can only damage your system. Question: “Pinal, we have 80 GB of data including all the database files, we have our data in NTFS file system. We have proper backups are set up. Any suggestion for our NTFS file system performance improvement. Our SQL Server box is running only SQL Server and nothing else. Please advise.” When I receive questions which I have just listed above, it often sends me deep thought. Honestly, I know a lot but there are plenty of things, I believe can be built with community knowledge base. Today I need you to help me to complete this list. I will start the list and you help me complete it. NTFS File System Performance Best Practices for SQL Server Disable Indexing on disk volumes Disable generation of 8.3 names (command: FSUTIL BEHAVIOR SET DISABLE8DOT3 1) Disable last file access time tracking (command: FSUTIL BEHAVIOR SET DISABLELASTACCESS 1) Keep some space empty (let us say 15% for reference) on drive is possible (Only on Filestream Data storage volume) Defragement the volume Add your suggestions here… The one which I often get a pretty big debate is NTFS allocation size. I have seen that on the disk volume which stores filestream data, when increased allocation to 64K from 4K, it reduces the fragmentation. Again, I suggest you attempt this after proper testing on your server. Every system is different and the file stored is different. Here is when I would like to request you to share your experience with related to NTFS allocation size. If you do not agree with any of the above suggestions, leave a comment with reference and I will modify it. Please note that above list prepared assuming the SQL Server application is only running on the computer system. The next question does all these still relevant for SSD – I personally have no experience with SSD with large database so I will refrain from comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Fun with Sun Ray, 3D, Oracle VM x86 and SRIOV

    - by wim.coekaerts
    One of the things I like about my job is that I get to play around with stuff and make use of the technologies we work on in my teams. Sort of my own little playground. It allows me to study the products in great detail and put them to use in ways that individual product teams don't always intend them to be used for :) but that makes it fun. I have a lot of this set up at home because... work is sort of hobby and I just like to tinker with it. Anyway, a few weeks ago I was looking at my sun ray rig at home and how well 3D works. Google Earth and some basic opengl tests like glxspheres combined with virtualgl. It resulted in some very cool demos recorded with my little camera (sorry for the crappy quality of the video :-) : OVDC (soft client) on my mac Sun Ray 2FS Never mind the hickups during zoom, that's because I was using the scrollwheel on my mouse and I can't scroll uninterrupted :) Anyway, this is quite cool ! The setup for this was the following : Sun Ray on LAN, Sun Ray Server 5 latest installed on OL5.5 inside a VM running on Oracle VM 2.2 (hardware virt, with a virtual network (vif)) and the virtualgl rendering happened on another box (wopr5) that runs linux on a little atom D520 with an ION2 gpu. So network goes from Sun Ray to Sun Ray Server to wopr5 and back. Given that this is full screen 3D it puts a good amount of load on the network and it's pretty cool that SRS was just a VM :) So, separately, I had written a little blog entry about using sriov and oracle vm a while back. link to sriov blog entry Last night when I came home I wanted to do some more playing around with SRIOV and live migrate. To do this, I wanted to set up a VM with 2 network interfaces, one virtual network (vif) and then one that's one of the SRIOV virtual functions from my network card. Inside the guest they show as eth0 and eth1, and then bond them using a standard linux bonding device (bond0 here) with active active links. The goal here is that on live migrate, we would detach the VF (eth1 in guest in this case), the bond would then just hum along on eth0 (vif) we can live migrate the VM and then on the other server after the migrate completes we re-attach a VF to the VM there and eth1 pops up again and the bond uses both eth0/eth1 to do its work. So, to set this up, I figured, why not use my sun ray server VM because the 3D work generates a nice network load and is very latency/timing sensitive. In the end, I ran glxspheres on my sunray server (vm) displaying on my sun ray 2 fs and while that was running, I did my live migrate test of this vm (unplug pci VF, migrate, reconnect vf) and guess what, it just kept running :) veryyyyyy cool. now, it was supposed to, but it's always nice to see it actually work, for real. Here's a diagram of it. No gimics - just real technology at work ! enjoy :)

    Read the article

  • Mocking successive calls of similar type via sequential mocking

    In this post , i show how you can benefit from  sequential mocking feature[In JustMock] for setting up expectations with successive calls of same type.  To start lets first consider the following dummy database and entity class. public class Person { public virtual string Name { get; set; } public virtual int Age { get; set; } }   public interface IDataBase { T Get<T>(); } Now, our test goal is to return different entity for successive calls on IDataBase.Get<T>()....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Screen goes nuts and unreadable

    - by ChazD
    Running Ubuntu 10.10 in its own partition, also have Oracle Virtualbox 4 with Windows XP. Because i previously had a problem with a dark screen when i let the laptop on and i didn't use it for a long while i had set Power settings to Never sleep, never let the Display sleep. Monitor on install set to Laptop resolution 1400 by 1050, refresh rate 60 Hz, rotation Normal. The problem was when the computer was left on and i returned after about an hour, the screen was unreadable, similar to what used to happen to graphics cards before multisync became normal. So it appears as though the graphics card was asked to use a resolution it couldn't handle and went nuts. I had to power off the system, on restart everything was fine. Thanks for any suggestions. ChazD

    Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >