Search Results

Search found 20051 results on 803 pages for 'ribbon control'.

Page 508/803 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• Netboot Intel Macs without BSDP

  - by notpeter

  I have a netboot setup with DeployStudio that works great in my lab, but doesn't work on our main network. After some digging, I believe it's because our network admins are filtering BSDP (Boot Service Discovery Protocol) on our subnet at the switch level. Is it possible to hard code which server my clients (early 2007 iMac Core2Duos) should boot from without relying on BSDP? Perhaps relevant details: I do not have control over switch configs or DHCP settings. Client and server are running 10.6 Snow Leopard. The clients see the netboot server advertising itself in the 'Startup Disk' system preferences pane, but when I go to netboot it just leaves me with a flashing globe.

  Read the article

• IBM laptop remove access-connections

  - by Kevin

  I installed IBM Access Connections on my IBM t61 laptop to manage my wireless connections but it simply will not connect to my network. I want to uninstall it and try the Intel software which is capable to performing the same task. However, when I go into "Control Panel" - "Add/Remove Programs" and try to "Remove" this package, it simply opens up a screen and closes it immediately. This happens too fast for me to see whether its an error. Has anyone encountered this issue ? The event logs do not show any error.

  Read the article

• How can I connect to a CIFS/SMB share on a non-default port?

  - by fsckin

  I'm trying to get a contractor connected to a CIFS share (port 445). He's not a big shop (so no go on using VPN). His ISP blocks outgoing connections on port 445. I've been doing some rsync to ftp madness as a workaround to have the share available to him, but it's getting out of control -- we're syncing nearly 40GB a day to an external ftp site and it's going to be much easier just to have him connect and only grab the stuff he needs. So... I can have the CIFS share open to the internet (filtered to allow access to his IP only) on port 446. How the heck can he connect to that? I looked through "net use" and didn't see anything about using another port.

  Read the article

• Domain transfer and New Hosting Management

  - by Anubhav Saini

  I wanted to migrate from my older registrar to GoDaddy. Main reason because current registrar/hosting provider doesn't support .NET. My old registrar gave me control over the domain and hosting account. So, basically I have everything I would need. ( I know theory only ) I applied for Transfer of domain, bought a hosting package from GoDaddy and uploaded new web site. So, I am waiting for domain transfer and it tells me that I have to wait for 5-7 days for approval. Okay. But today, my old registrar told/taunted me that I really didn't need to apply for transfer. What could possibly I have done differently? My domain expires on this 15th. Now I don't know much about how all of this really works, but I am guessing he meant, "you should have waited for 15 days and let it expire after which you should buy the domain as it is expired". Is it really so(I doubt) or there are some other ways I could have got same result but without transferring domain? (like, changing DNS entries) I have read like all of the documentation available on namecheap/GoDaddy/Whois about domain transfers. But maybe because I am new to this it is all confusing to me. I would also like to know what to do with DNS settings after transfer succeeds. I want to kill the old website. So, what nameserver settings I need to change, new one or old one or both? I have old host+old domain registrar + old working site on one hand, on the other hand, new site + pending domain transfer + new DNS settings.

  Read the article

• A different interface for the Sql Server Reporting Service?

  - by AngryHacker

  I have a SQL Server 2005 SQL Reporting Services implementation. It seems that the only way to actually access the reports is for the users to use Internet Explorer. The web page uses an ActiveX control to do its printing (and probably other functions as well). Does SSRS have a different way to access its functionality via the web browser? Like maybe Java or HTML based? If so, how do I actually turn it on? The reason I am asking is because the security is being tightened and ActiveX controls will be banished, thus the users won't be able to print.

  Read the article

• Outlook 2007: compose, and reply error with "Not Implemented."

  - by dagit

  This is happening on a Windows Vista machine with Office 2007 Ultimate. I have run repair from the control panel and also the MS Office Diagnostic tool. No problems are reported. When I started Outlook my mail box opens and I can read my messages. If I click compose or reply then Outlook gives me a dialog that says, "Not Implemented." The rest of office seems to be working fine. Does anyone know what causes this or the correct way to repair it? Thanks!

  Read the article

• Cannot install FrontPage 2002 Server Extensions on Server 2003

  - by Sentax

  Hi everyone, I've followed the Microsoft article to install FPSE 2002 on my Windows 2003 server: To install and enable FrontPage 2002 Server Extensions 1. From the Start menu, click Control Panel. 2. Double-click Add or Remove Programs. 3. Click Add/Remove Windows Components. 4. In the Windows Components Wizard, double-click Application Server, double-click Internet Information Services, and then select the FrontPage 2002 Server Extensions check box. 5. Click OK twice, click Next, and then click Finish. But on step 4 "FrontPage 2002 Server Extensions" does not show up in the list in the IIS details window. How do I get FPSE 2002 installed on my server? From what I can understand it's supposed to be there and I just have to enable it. But that's not an option for me. Thanks.

  Read the article

• Tomcat 5.5 - multiple contexts using same path

  - by ctn8iv

  Is it possible to set up multiple contexts using the same path? For example: <Context docBase="/www/websites/site1/java/base" path="/base" reloadable="true"/> <Context docBase="/www/websites/site2/java/base" path="/base" reloadable="true"/> I have two sites that use the same path both running on the same server/IP. The sites use different virtual hosts and different ServerNames, but I have no control over the directory structure of the sites because they are maintained by a client. Until now, they have been content with only allowing one site to run at a time, but this is a major hassle, so I need to know if there's a workaround.

  Read the article

• Using symbolic links with git

  - by Alfredo Palhares

  I used to have my system configuration files all in one directory for better management but now i need to use some version control on it. But the problem is that git doesn't understand symbolic links that point to outside of the repository, and i can't invert the role ( having the real files on the repository and the symbolic links on their proper path ) since some files are read before the kernel loads. I think that I can use unison to sync the files in the repo and and the their paths, but it's just not practical. And hard links will probably be broken. Any idea ?

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• PowerShell & SQL Compare

  - by Grant Fritchey

  Just a quick blog post to share a couple of scripts for using PowerShell to call SQL Compare. This is an example from my session at SQL in the City on setting up a sandbox development process. This just runs a compare between a set of scripts and a database and deploys it. set-Location “c:\Program Files (x86)\Red Gate\SQL Compare 10\”; ./sqlcompare /s2:DOJO /db2:MovieManagement_Sandbox /sourcecontrol1 /vu1:grant /vp1:12345 /r1:HEAD /sfx:scripts.xml /sync /mfx:migrations.xml /verbose; I would not recommend using the /verbose output for real automation, but I’m showing off how the tool works. This particular script does a compare straight from source control to a database on my server. You can use variables where I’ve hard coded. That’s it. Works great. Just wanted to share it out there. I have others that I’ll track down and put up here.  

  Read the article

• Suggestions for Troubleshooting WIndows 7 lockups

  - by Craig L

  I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

  Read the article

• ArchBeat Link-o-Rama for December 14, 2012

  - by Bob Rhubart

  JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes | John-Brown Evans John Brown Evans' post continues the series of JMS articles that demonstrate how to use JMS queues in a SOA context. "This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite," John explains. And if you missed the first 5 steps, don't worry – the post includes links. Cloud Deployment Models | B. R. Clouse Looking out for the cloud newbies... "As the cloud paradigm grows in depth and breadth, more readers are approaching the topic for the first time, or from a new perspective," says B. R. Clouse. "This blog is a basic review of cloud deployment models, to help orient newcomers and neophytes." Understanding the JSF Lifecycle and ADF Optimized Lifecycle | Steven Davelaar Would you call that a surprise ending? Oracle WebCenter & ADF Architecture Team (A-Team) member learned a lot more than he expected while creating a UKOUG presentation entitled "What you need to know about JSF to be succesful with ADF." Using Oracle Enterprise Manager Cloud Control 12c with Filer Snapshotting | Porus Homi Havewala This concise technical article includes a script for database backup using snapshots and cataloging in RMAN. Thought for the Day "A program which perfectly meets a lousy specification is a lousy program." — Cem Kaner Source: SoftwareQuotes.com

  Read the article

• Make the sound louder in Lubuntu

  - by Andrew

  I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

  Read the article

• configuring USB modem( Huawei EC156) in ubuntu 13.10

  - by user205427

  I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

  Read the article

• Minimizing data sent over a webservice call on expensive connection

  - by aceinthehole

  I am working on a system that has many remote laptops all connected to the internet through cellular data connections. The application will synchronize periodically to a central database. The problem is, due to factors outside our control, the cost to move data across the cellular networks are spectacularly expensive. Currently the we are sending a compressed XML file across the wire where it is being processed and various things are done with (mainly stuffing it into a database). My first couple of thoughts were to convert that XML doc to json, just prior to transmission and convert back to XML just after receipt on the other end, and get some extra compression for free without changing much. Another thought was to test various other compression algorithms to determine the smallest one possible. Although, I am not entirely sure how much difference json vs xml would make once it is compressed. I thought that their must be resources available that address this problem from an information theory perspective. Does anyone know of any such resources or suggestions on what direction to go in. This developed on the MS .net stack on windows for reference.

  Read the article

• What is Mobsync.exe? Assuming I don't need it, can I disable it in Windows 7 without ill side effect

  - by Chris W. Rea

  I'm running Windows 7. Occasionally when I resume my computer from standby, it seems to wait 20-30 seconds or so before giving me full control back. In an attempt to diagnose why, I've been watching what's going on using the awesome Process Explorer. One of the processes I've noticed being started during that hiccup time is Mobsync.exe, described as "Microsoft Sync Center". Sync? Sync what? So, what is Mobsync.exe used for, exactly? Assuming I don't need its functionality, can I disable it in Windows 7 without ill side effect? If so, what's the best way to disable Mobsync.exe?

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• The concept of virtual host and DNS [migrated]

  - by Subhransu

  I have a dedicated server and a mydomain.com (bought from a hosting company). I want to host a website from my dedicated server with the domain mydomain.com i.e. when I enter mydomain.com from browser it should point to the IP(let's say X.X.X.X) of dedicated server(and a particular folder inside it). I have some following queries: In Server I know I need to edit some of the files (like: host or hostname file) in the server but I do not know what exact file I need to edit. How to add a Site enable or Site available in apache2 ? In Hosting Company control Panel Which records to add (A or cname or anyother)? Where Should I add DNS(in dedicated server section or domain name section)? How it is going to affect the behaviour of the domain? in short the question is: How the virtual host works & how to add DNS?

  Read the article

• juju bootstrap key error?

  - by mxdog

  I followed the guides the best as i could. there is some information missing like do as root or as regular user ..formatting, quotes no quotes..what the password or paraphrase for ssh should be ..couple other trivial things. that im sure add up to where im at (stuck!) so i have a working mass server on mx-nas-01 and 3 nodes and have been trying to get juju to start. I have tried this as both root and my regular account, sudo no-sudo and here is the output i get from juju bootstrap (however i try it) I don't know if this could be a host,domain,account issue or what i will mention i did have to shut off my dhcp server and install masq (all defaults) to get the maas pxe to work for the nodes mxdog@mx-nas-01:/$ juju bootstrap Traceback (most recent call last): File "/usr/bin/juju", line 8, in main(sys.argv[1:]) File "/usr/lib/python2.7/dist-packages/juju/control/init.py", line 183, in main env_config.load_or_write_sample() File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 229, in load_or_write_sample self.load() File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 115, in load self.parse(file.read(), path) File "/usr/lib/python2.7/dist-packages/juju/environment/config.py", line 138, in parse config = SCHEMA.coerce(config, []) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 266, in coerce new_dict[k] = self.schema[k].coerce(v, path) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 233, in coerce new_subvalue = self.value_schema.coerce(subvalue, value_path) File "/usr/lib/python2.7/dist-packages/juju/lib/schema.py", line 301, in coerce return self.schemas[selected].coerce(value, path) KeyError: 'mass' environments: maas: type: mass mass-server: http://192.168.0.30:80/MAAS mass-oauth: tDRdtJeEKVARBh93eT:N5dK5HSZBsA45cBdx9:S8wMNrfkT9PeYvQN9YrnbHGxmKARv8vb admin-secret: ########## default-series: precise

  Read the article

• What are the advantages of programming to under an OS as opposed to bare metal executive?

  - by gby

  Assume you are presented with an embedded system application to program, in C, on a multi-core environment (think a Cavium or Tilera) and need to choose between two environments: Code the application under Linux in SMP mode or code the application under a thin bare metal executive (something like a very minimal RTOS), perhaps with a single core running UP Linux that can serve control tasks. For the purpose of this question, assume that both environment provide the same level of performance guarantees in any measurable aspects of run time performance, including number of meaningful action per second, jitter, latency, real time considerations - the works. (and yes, I realize this is by far not a trivial assumption at all, bare with me). How would you justify going with a Linux SMP based solution rather then a bare metal thin executive solution? The question may seems silly. It certainly seems obvious to me - but I have to convince someone that does not think the same. Could you help make a list of arguments in favor of choosing a real SMP aware OS (Linux) vs. a bare metal executive assuming performance guarantees are NOT an issue? Many thanks

  Read the article

• Do we have enough time to build an electric car future?

  - by julien.groues

  A recent article from Greenbang has posed the question 'Do we have enough time to build an electric car future?'. The writer discusses that, although the future of transport might lie with electric cars, there is concern regarding whether we'll be able to build the market and infrastructure required to support them, before carbon and oil constraints create difficulties in powering the vehicles. Of course, the increasing use of Electric vehicles (EVs) is going to put excessive pressure on energy grids, as large volumes of electricity will need to be directed to charging points, which in turn must handle fluctuating demand at peak times. EVs are increasing in popularity as a sustainable method of transport to reduce carbon consumption, and electric utilities will have the opportunity, and the challenge, to quickly determine the best methods to fuel these vehicles and accommodate the associated increases in demand for energy. Critically, efficient software is required to provide diagnostic and predictive capabilities related to EV refuelling - for example, anticipated electricity flow will need to be addressed as the number of EVs on the road increases, and electricity will need to be directed to specific areas on-demand as vehicles attempt to recharge en-mass. But a smart grid infrastructure can meet these demands, intelligently. The implementation of a smart grid is not in the distant future, it is an achievable reality for utilities via simple installation of new software and technologies, which can be done incrementally for those facing existing legacy systems or concerned with upfront costs. The smart grid is integral to the monitoring and control of energy use as well as the future-proofing of the energy grid. A smart grid will be critical to meeting the electricity requirements of new EVs and will ensure their successful deployment by providing a reliable foundation for the data handling required to record and manage electricity distribution - from recording and assessing energy usage, to analysing data and sharing information with consumers via green billing. http://www.greenbang.com/do-we-have-enough-time-to-build-an-electric-car-future_14248.html

  Read the article

• RPi and Java Embedded GPIO: Java code to blink more LEDs

  - by hinkmond

  Now, it's time to blink the other GPIO ports with the other LEDs connected to them. This is easy using Java Embedded, since the Java programming language is powerful and flexible. Embedded developers are not used to this, since the C programming language is more popular but less easy to develop in. We just need to use a dynamic Java String array to map to the pinouts of the GPIO port names from the previous diagram posted. This way we can address each "channel" with an index into that String array. static String[] GpioChannels = { "0", "1", "4", "17", "21", "22", "10", "9" }; With this new dynamic array, we can streamline the main() of this Java program to activate all the ports. /** * @param args the command line arguments */ public static void main(String[] args) { FileWriter[] commandChannels; try { /*** Init GPIO port for output ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to port input/output control FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for output directionFile.write(GPIO_OUT); directionFile.flush(); } And, then simply add array code to where we blink the LED to make it blink all the LEDS on and off at once. /*** Send commands to GPIO port ***/ commandChannels = new FileWriter[GpioChannels.length]; for (int channum=0; channum It's easier than falling off a log... or at least easier than C programming. Hinkmond

  Read the article

• Hot Off the Press - Oracle Exadata: A Data Management Tipping Point

  - by kimberly.billings

  Advances in data-management architecture - including CPU, memory, storage, I/O, and the database - have been steady but piecemeal. In this report, Merv Adrian describes how Oracle Exadata not only provides the latest technology in each part of the data-management architecture, but also integrates them under the full control of one vendor with a unified approach to leveraging the full stack. He writes, "the real "secret sauce" of Oracle Exadata V2 is the way in which these technologies complement each other to deliver additional performance and scalability." Merv interviews two Exadata customers, Banco Transylvania and TUI Netherlands, and concludes that early indications are that Oracle Exadata is delivering on its promise of extreme performance and scalability. His recommendation to IT is to target corporate applications with the biggest potential for speed-based enhancement, and consider whether Oracle Exadata V2 can cost-effectively enable new ways to use these for competitive advantage. Read the full report. var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

  Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >