Search Results

Search found 7787 results on 312 pages for 'apt upgrade'.

Page 51/312 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• cannot connect with huawei e173 after upgrade to 12.10 using network manager

  - by user104195

  Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

  Read the article

• Finally, upgrade from Nokia X3 to Samsung Galaxy S III

  This time, something slightly different but nonetheless not less interesting, hopefully. Living on a remote island like Mauritius, ill-praised 'Cyber Island' in the Indian Ocean, has its advantages in life style and relaxed environment to life in but in terms of technological aspects it can be quite a nightmare. Well, I guess this might be different story to report about... one day. Cyber Island Mauritius Despite it's shiny advertisement as Cyber Island and business in ICT hub to Africa, Mauritius is not on the latest track of available models in computer hardware or, in the context of this article, cellulars or smart-phone, or communication technology in general. Okay, I have to admit that this statement is only partly true. Money can buy, even here in Mauritius. Luckily, there are ways and ways to deal with this outcry of modern, read: technological, civilisation issues. Online shopping you might think? Yes, for sure, until you discover in your checkout procedure that a small island in the Indian Ocean isn't a preferred destination for delivery and the precious time you spent on putting your items into your cart and feeding your personal level of anticipation gets ruined on the last stint. Ordering from abroad saves you money Anyway, I got in touch with my personal courier and luckily there were some extra-kilos left in the luggage. First obstacle sorted, we have a Transporter! Okay, on the next occasion off to Amazon online and using their Prime service for fast delivery. Actually, the order was placed on Saturday evening and everything got delivered on Tuesday morning - nice job in less than 72 hours. Okay, among the items of that shopping rush I ordered a shiny Samsung Galaxy S III 16GB in oceanic blue - did I mention, that you hardly get a blue model in Mauritius? - for my BWE. Interesting side-notes: First, Amazon Germany dropped the prices for roughly 30% on the S3, and we got the 16GB model for less than 500 Euro (or approx. Rs. 19.500,-) compared to the usual Rs. 27.000,- on the local market. It even varies whether the local price is inclusive or exclusive VAT (15%). Second, since a while she was bothering me to get an iPhone and an iPad for her, fair enough I thought, decent hardware, posh design and reliable services. Until we watched the 'magical' introduction of Samsung's new models at the IFA exhibition, she read the bashing comments on Google+ on the iPhone 5 and I gave her a brief summary on the law suit between Apple and Samsung in the USA. So, yes, Samsung USA is right, the next big thing is already here - literally. My BWE loves the look and touch of the Galaxy S3. And for me it was more cost-effective in terms of purchases done at the App Store, ups, Play Store. Transfer of contacts, text messages and media files Okay, now that the hardware is in place, how to transfer all those contacts, text messages, media files, etc. between those two devices? In the past, I used to use the Nokia Communication Suite between various models but now for Android? Well, as usual Google and Bing are reliable friends and among the first hits I came across an article about How to Transfer Contacts from Nokia to Android. Couldn't be easier, right? Well, sort of... my main Windows systems are already running on Windows 8, and this actually caused problems with the mobile/smart-phone device drivers. The article provides the download for an older version 1.10 which upgrades to 2.11 (as time of writing this entry) but both couldn't get the Galaxy S3 and the Nokia connected. Shame on me... the product page clearly doesn't mention Windows 8 (for now) and Windows 8 isn't available for the general audience at all... After I took a spare machine running on Windows Vista everything went smooth. Software installed, upgrade done, device drivers for Android automatically downloaded and installed, and the same painless routine for the Nokia part. I think, I rebooted the system twice during the whole setup procedure but hey, it was more or less a distraction while coding some stuff in ASP.NET MVC and Telerik Kendo UI. The transfer of contacts and text messages was done via Wondershare MobileGo for Android, and all media files by moving the additional microSD card from one device to the other. But even without an external SD card, it would have been very easy to copy the files via Windows Explorer directly. Little catch and excellent service Fine, we are almost done and the only step left is to shift the SIM card... Ouch, gotcha! The X3 uses a standard size SIM card while the S III only accepts microSIM form factor. What an irony, bigger smartphone needs smaller SIM card. Luckily, the next showroom of Emtel is just 5 mins away up the road, and the service staff over there know their job. Finally, after roughly 10 mins of paper work, activation and small chit-chat, the S3 came to life on the mobile network. Owning a smart-phone now and knowing that my BWE would like to interact more on social networks away from home, especially to upload pictures and provide local 'check-ins', I activated a data package for her in advance, too. Even that it is Saturday, everything was already done and ready to be used. Nice bonus: The Emtel clerk directly offered me to set up the configuration for the Emtel data services, yes sure, go ahead, this saves me to search for that in the settings. Okay, spoiler-alert here, setting a static APN to access the Emtel network and the internet wouldn't be a challenge. But hey, she already had the phone in her hands and I could keep my eyes on the children. Well done, Emtel! Resume Thanks to the useful software package by Wondershare is was a hands-free experience to transfer all the data from a Nokia mobile on Symbian S60 to a Samsung Galaxy S III on Android Ice Cream Sandwich (ICS). In the future, this wont be a serious issue at all anymore thanks to synchronisation services and cloud storage. And for now, I'm only waiting for the official upgrades for Jelly Bean.

  Read the article

• Finally, upgrade from Nokia X3 to Samsung Galaxy S III

  This time, something slightly different but nonetheless not less interesting, hopefully. Living on a remote island like Mauritius, ill-praised 'Cyber Island' in the Indian Ocean, has its advantages in life style and relaxed environment to life in but in terms of technological aspects it can be quite a nightmare. Well, I guess this might be different story to report about... one day. Cyber Island Mauritius Despite it's shiny advertisement as Cyber Island and business in ICT hub to Africa, Mauritius is not on the latest track of available models in computer hardware or, in the context of this article, cellulars or smart-phone, or communication technology in general. Okay, I have to admit that this statement is only partly true. Money can buy, even here in Mauritius. Luckily, there are ways and ways to deal with this outcry of modern, read: technological, civilisation issues. Online shopping you might think? Yes, for sure, until you discover in your checkout procedure that a small island in the Indian Ocean isn't a preferred destination for delivery and the precious time you spent on putting your items into your cart and feeding your personal level of anticipation gets ruined on the last stint. Ordering from abroad saves you money Anyway, I got in touch with my personal courier and luckily there were some extra-kilos left in the luggage. First obstacle sorted, we have a Transporter! Okay, on the next occasion off to Amazon online and using their Prime service for fast delivery. Actually, the order was placed on Saturday evening and everything got delivered on Tuesday morning - nice job in less than 72 hours. Okay, among the items of that shopping rush I ordered a shiny Samsung Galaxy S III 16GB in oceanic blue - did I mention, that you hardly get a blue model in Mauritius? - for my BWE. Interesting side-notes: First, Amazon Germany dropped the prices for roughly 30% on the S3, and we got the 16GB model for less than 500 Euro (or approx. Rs. 19.500,-) compared to the usual Rs. 27.000,- on the local market. It even varies whether the local price is inclusive or exclusive VAT (15%). Second, since a while she was bothering me to get an iPhone and an iPad for her, fair enough I thought, decent hardware, posh design and reliable services. Until we watched the 'magical' introduction of Samsung's new models at the IFA exhibition, she read the bashing comments on Google+ on the iPhone 5 and I gave her a brief summary on the law suit between Apple and Samsung in the USA. So, yes, Samsung USA is right, the next big thing is already here - literally. My BWE loves the look and touch of the Galaxy S3. And for me it was more cost-effective in terms of purchases done at the App Store, ups, Play Store. Transfer of contacts, text messages and media files Okay, now that the hardware is in place, how to transfer all those contacts, text messages, media files, etc. between those two devices? In the past, I used to use the Nokia Communication Suite between various models but now for Android? Well, as usual Google and Bing are reliable friends and among the first hits I came across an article about How to Transfer Contacts from Nokia to Android. Couldn't be easier, right? Well, sort of... my main Windows systems are already running on Windows 8, and this actually caused problems with the mobile/smart-phone device drivers. The article provides the download for an older version 1.10 which upgrades to 2.11 (as time of writing this entry) but both couldn't get the Galaxy S3 and the Nokia connected. Shame on me... the product page clearly doesn't mention Windows 8 (for now) and Windows 8 isn't available for the general audience at all... After I took a spare machine running on Windows Vista everything went smooth. Software installed, upgrade done, device drivers for Android automatically downloaded and installed, and the same painless routine for the Nokia part. I think, I rebooted the system twice during the whole setup procedure but hey, it was more or less a distraction while coding some stuff in ASP.NET MVC and Telerik Kendo UI. The transfer of contacts and text messages was done via Wondershare MobileGo for Android, and all media files by moving the additional microSD card from one device to the other. But even without an external SD card, it would have been very easy to copy the files via Windows Explorer directly. Little catch and excellent service Fine, we are almost done and the only step left is to shift the SIM card... Ouch, gotcha! The X3 uses a standard size SIM card while the S III only accepts microSIM form factor. What an irony, bigger smartphone needs smaller SIM card. Luckily, the next showroom of Emtel is just 5 mins away up the road, and the service staff over there know their job. Finally, after roughly 10 mins of paper work, activation and small chit-chat, the S3 came to life on the mobile network. Owning a smart-phone now and knowing that my BWE would like to interact more on social networks away from home, especially to upload pictures and provide local 'check-ins', I activated a data package for her in advance, too. Even that it is Saturday, everything was already done and ready to be used. Nice bonus: The Emtel clerk directly offered me to set up the configuration for the Emtel data services, yes sure, go ahead, this saves me to search for that in the settings. Okay, spoiler-alert here, setting a static APN to access the Emtel network and the internet wouldn't be a challenge. But hey, she already had the phone in her hands and I could keep my eyes on the children. Well done, Emtel! Resume Thanks to the useful software package by Wondershare is was a hands-free experience to transfer all the data from a Nokia mobile on Symbian S60 to a Samsung Galaxy S III on Android Ice Cream Sandwich (ICS). In the future, this wont be a serious issue at all anymore thanks to synchronisation services and cloud storage. And for now, I'm only waiting for the official upgrades for Jelly Bean.

  Read the article

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• how to resolve error in ubuntu

  - by Bipul

  i m using ubuntu 9.04. when i m running any command like sudo apt-get update ,i get following error message"E: Type 'l.com/ubuntu' is not known on line 45 in source list /etc/apt/sources.list E: The list of sources could not be read. ".due to this problem i m not able to download anything.please help

  Read the article

• Differences between "apache"'s installations

  - by JustTrying

  Using Ubuntu 12.04, are there any differences between installing Apache httpd using sudo apt-get install apache2 (as the guide of Ubuntu says - https://help.ubuntu.com/12.04/serverguide/httpd.html ) or following the steps on the Apache documentation (http://httpd.apache.org/docs/2.4/install.html#overview)? I tried both ways; in the first case (using apt-get) the server seems to work - I open a browser page and I got it. In the second case I need other packages (apr, apr-util and pcre) and so I abandoned the attempt.

  Read the article

• Acer aspire 5735z wireless not working after upgrade to 11.10

  - by Jon

  I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

  Read the article

• Help with Bash script

  - by Andrew

  #!/bin/bash if [ "$(Which gimp)" != ""] then { if [ "$(gimp -version)" != 2.8 ] then { sudo apt-get remove gimp sudo add-apt-repository ppa:otto-kesselgulasch/gimp sudo apt-get update sudo apt-get install gimp } else echo You already have gimp 2.8 fi } else { sudo add-apt-repository ppa:otto-kesselgulasch/gimp sudo apt-get update sudo apt-get install gimp } fi I am trying to make a gimp 2.8 installer in bash Please help me?

  Read the article

• Can't upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials

  - by Magnus

  So today was RTM of Windows Server 2012 R2 Essentials released. I immediately tried to do an in-place upgrade of an existing RTM 2012 Essentials to RTM 2012 R2 Essentials, but get: Windows Server 2012 Essentials cannot be upgraded to Windows Server 2012 R2 Essentials. You can choose to install a new copy of Windows Server 2012 R2 Essentials instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You’ll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows Server 2012 R2 Essentials, click the Back button in the upper left-hand corner, and select “Custom (advanced)”. This seems a bit odd, is this really the case? I can't find anything in the official documentation stating that this upgrade isn't possible.

  Read the article

• SAN cache memory upgrade

  - by Scott Lundberg

  We currently have an IBM DS4300 Dual Controller Fibre SAN. It is a good box, but getting pretty old. It came with 256MB of cache per controller. Recently we replaced the batteries in one of the controllers and noticed that the cache is a DDR PC2100 ECC DIMM. Of course, we are thinking about how cheap this RAM is now and is there any good reason we can't upgrade the RAM. IBM used to have a "Turbo" upgrade to this box that doubled the cache and had a bunch of software features for about 10K USD. Since that product has been end-of-lifed, I don't think we can get that upgrade and we don't need the software upgrades (FlashCopy, StorageCopy, etc). Besides the obvious potential warranty issue, what if any issues would we expect to see if attempting to put 2 - 1GB DIMMS in this unit? Any other things I am missing here? EDIT: Memory label: Samsung CN 0433 PC2100U-25331-A1 M381L3223ETM-CB0 256MB DDR PC2100 CL2.5 ECC

  Read the article

• Cannot access files after trying to upgrade Ubuntu

  - by Ola

  I tried to upgrade Ubuntu from 11.10 to 12.04. I left it for 24 hours but the upgrade did not complete. Hence I cancelled the upgrade. I thought I will copy all the files that I have to a DVD/CD and try try downloading a copy of Ubuntu. But now, I cannot open any file or copy them. I cannot even shutdown my laptop. I have many important files on my laptop. Can someone help me retrieve my files from my laptop? Regards Ola

  Read the article

• upgrade from windows server 2008 r2 std to enterprise

  - by Ravi

  We recently had to upgrade our servers from Win 2008 R2 Standard to Enterprise. The upgrade method was DISM. After the upgrade, a lot of weird things started to happen. Though Windows says it's been properly activated, we lost 1) RDP settings (disappeared from the Remote Setting tab of Properties of My Computer) 2) The option to join a domain is grayed out 3) The server had to 2 physical processors 12 cores each. Now, task manager or windows sees only 1 processor (or only 12 cores) 4) the amount of physical ram on this sever is 32 GB (Windows reports only 4 GB are usable) Has anyone encountered this before ? Thanks Ravi

  Read the article

• Memory upgrade - is the site reliable?

  - by Yuval

  Hi, I have a late-2008 unibody macbook model with 2 GB of ram. I am looking to upgrade to 4 GB of ram. I looked about a month ago at Other World Computing's 4 GB upgrade kit and I remember it being around $80. I looked today, finally getting to buy it and it went up to almost $100. I found another site, memoryupgrade.pro that calls itself "Pro memory upgrade" and it looks legitimate - it sells the memory for around $80 in its own brand. The only thing is, I haven't been able to find any reviews about it, and I'm not sure if it actually is reliable. Does anybody have any experience with this site? Does anybody have any other suggestions for buying macbook memory? I have friends who bought from OWC and were happy, should I just spend the extra $30 (including shipping) and buy from them? Thanks!

  Read the article

• upgrade to windows8

  - by Siddharth Warrier

  I have a dell inspiron N5010 laptop. I am planning to upgrade to windows 8 and the existing version is windows 7. So when I planned to upgrade I found that in the website of dell they have not updated the drivers for windows 8. I had installed a preview version of windows 8 and installed the drivers of windows 7 so it got installed and is working fine. So shall I upgrade it to windows 8 and use windows 7 drivers???? or wait till the drivers are updated??????

  Read the article

• Should I upgrade memory for my dedicated server?

  - by mc1000

  My memory usage hangs around 25% (swap is generally 1%) on my dedicated server and load is around 2-5. My host recommended that I upgrade from 2GB of ram to 4GB so that I can increase my innodb_buffer from the default 16MB to 2GB. My innodb table size is 2GB. My question is, given that ram usage is 25% does it make sense to upgrade ram? Queries are hanging sometimes, so I'm thinking that a bigger innodb_buffer could decrease load on the database, just not sure if I really need to upgrade my ram first.

  Read the article

• Installation problem Ubuntu 12.04 Crashing hardware error

  - by user93640

  I am running on Ubuntu 8.04 for quite some time without many problems. About almost a year ago or so I have been trying to upgrade to 10.04 LTS, but without any success. Each time when trying to upgrade or even newly install the installation process crashed after about an hour or so (I forgot exactly how long). Now I wanted to try Ubuntu 12.04 (not even installing, but I only selected "Try Ubuntu without installing") and I got similar errors. I did not try to install it, because of earlier experience with 10.04 when after I also lost 8.04 and had to install from scratch again (after which it worked). I get the following screen (as I am not allowed to upload photos here the text): 26.767262] [Hardware Error]: CPU 0: Machine Check Exception: 0 Bank 5: b200001804000e0f 26.767279] [Hardware Error]: TSC 0 26.767287] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 0 microcode 44 26.767297] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767307] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 1: b200000000000175 26.767316] [Hardware Error]: TSC 0 26.767323] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767331] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767339] [Hardware Error]: CPU 1: Machine Check Exception: 0 Bank 5: b200003000000e0f 26.767348] [Hardware Error]: TSC 0 26.767354] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017924 SOCKET 0 APIC 1 microcode 44 26.767363] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767371] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 1: b200000000000175 26.767379] [Hardware Error]: TSC 1bf231e65f 26.767386] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767395] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767403] [Hardware Error]: CPU 1: Machine Check Exception: 4 Bank 5: b200003008000e0f 26.767413] [Hardware Error]: TSC 1bf231e65f 26.767421] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 1 microcode 44 26.767429] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767437] [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 5: b200001806000e0f 26.767447] [Hardware Error]: RIP |INEXACT| 60:<00000000c1018b5c> {mwait_idle+0x7c/0x1d0} 26.767464] [Hardware Error]: TSC 1bf231e674 26.767471] [Hardware Error]: PROCESSOR 0:6f6 TIME 1349017951 SOCKET 0 APIC 0 microcode 44 26.767480] [Hardware Error]: Run the above through 'mcelog --ascii' 26.767487] [Hardware Error]: Machine check: Processor context corrupt 26.767495] Kernel panic - not syncing: Fatal Machine check 26.767505] Pid: 579, comm: debconf-communi Tainted: G M 3.2.0.29-generic-pae #46-Ubuntu 26.767515] Call Trace: 26.767525] [<c158f812>] ? printk+0x2d/0x2f 26.767534] [<c158f6e0>] panic+0x5c/0x161 26.767542] [<c10247ef>] mce_panic.part.14+0x13f/0x170 26.767551] [<c1024872>] mce_panic+0x52/0x90 26.767558] [<c1024a18>] mce_reign+0x168/0x170 26.767565] [<c1024bb5>] mce_end+0x105/0x110 26.767572] [<c10252db>] do_machine_check+0x32b/0x4f0 26.767581] [<c1024fb0>] ? mce_log+0x120/0x120 26.767590] [<c15a5e47>] error_code+0x67/0x6c 26.767602] panic occurred, switching back to text console 26.768498] Rebooting in 30 seconds.. For information, I have also tried earlier Arch Linux. I can install it, but when I try to install a window manager (LXDE) again I got similar errors. Fedora also crashes when installing and also Mandriva did not work for me. Therefore I think something deep in the machine might be wrong. But as stated above I can (clean) install 8.04 and also 9.10 can be installed without problems. Also updates for 8.04 can be installed. My machine is dual boot with XP next to it on a different partition. My HW: Memory : 2.0 GiB; Processor 0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; Processor 1: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz; How can I install Ubuntu 12.04? Last option would be to completely format my machine and install everything from scratch, but even I am not sure if that would solve it in the end. Can anybody help me out?

  Read the article

• Gnome Shell got removed after updating Ubuntu 12.04

  - by CMG

  Now when i try to install it...it shows the following error sudo apt-get install gnome-shell Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gnome-shell : Depends: libgcr-3-1 (>= 3.4.0) but 3.2.2-2ubuntu4 is to be installed Depends: gir1.2-gcr-3 but it is not installable Recommends: gnome-contacts but it is not going to be installed E: Unable to correct problems, you have held broken packages. How can I install GNOME-Shell?

  Read the article

• Problem upgrading from 13.04 to 13.10

  - by Charles

  Part way through upgrading from 13.04 to 13.10 the process ground to a halt with an error message. Now on retrying by going to 'Check for updates' I get the following: Failed to load the package list This is a serious problem. Try again later. If this problem appears again, please report an error to the developers. E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_saucy_universe_i18n_Translation-en%%5fGB, E:The package lists or status file could not be parsed or opened. Problem reported but my question is, "what can I do now?; Do I have to do a fresh install?; if so will settings etc. in my Home folder (on its own partition) be saved?" 13.04 still seems to be working perfectly, while upgrading I had a terrible internet connection varying between 'dead slow' and 'dead stop', not sure if that caused the problem.

  Read the article

• Administrator user session only shows a terminal

  - by Saariko

  Weird problem: After upgrading to 11.10 (and I am sure that I worked with it for couple of days). We had a power failure, and now, when open the computer, what I get is a screen, with a scrollable list of users (administrator is one of them). When I select the administrator user, and login, I get on the top left a terminal window. That's it ! I don't see my regular ubuntu desktop. What's wrong? I have tried some of the issues mentioned here: Delete the .Xauthority sudo apt-get update *I had some DNS errors, so had to fic my /etc/resolv.config (works now) please advise.

  Read the article

• Why can't I get into my repositories?

  - by ken1943

  Upgraded from 10.04 to 10.10 by mistake and am having problems with some of my programs. They either don't work or they disappear from view on the screen. The Repositories menu item in Synaptic Packages Manager is a case in point. The computer does nothing when I choose this item. I am locked out of unless I edit /etc/apt/sources.list. The rest of the application seems to work, however. Update Manager just flashes on screen then disappears without doing, as does Printing. How do I downgrade from a higher to a lower level repository? I need to downgrade from 10.10 to 10.04. Each time Ubuntu upgrades to 10.10 evil things happen and the operating system really gets messed up. I really do not want to have to erase and install my operating system all over again if I can help it.

  Read the article

• Facing unity problems after upgrading to Ubuntu 12.04

  - by sh2515

  I upgraded to 12.04 and had problems with unity. So this is what I did 1) Ctrl + Alt + F1 sudo apt-get install compizconfig-settings-manager Export DISPLAY=:0 ccsm 2) Ctrl + Alt + F7 3) Enabled unityplugin 4) Ctrl + Alt + F1 unity --replace it worked with a couple of error messages now I have to put in start up application export DISPLAY=:0 unity --replace NVIDIA software recognises my monitor but ubuntu sees it as laptop. something isn't right can someone point out what info I need to put here for people to help. I have been upgrading this from 8 ish so have altered lots especially when compiz fusion first came out. Also if I run recovery session and type 'unity --replace' it starts and runs fine.

  Read the article

• UDK : Epic met à jour la beta de son kit de développement de jeu, avec un upgrade mensuel majeur

  UDK : Epic met à jour la beta de son kit de développement de jeu Avec un upgrade mensuel majeur MAJ du 10/03/2011 par ArKam [IMG]http://www.udk.com/elements/img/news_samaritan.jpg[/IMG] Je vous en parlé lors de mon précèdent poste, Epic upgrade souvent son moteur afin que celui-ci reste compétitif. Mais là, un niveau d'upgrade aussi important que celui du mois de mars ça frise le changement de version. En effet, non content d'avoir fait sensation avec sa présentation de l'Unreal-Engine Version 3.975, Epic réitère avec la sortie de l'upgrade mensuel de...

  Read the article

• Should I reorder partitions regarding performance

  - by Marcel

  I have in principal 3 big partitions on my Netbook. One Windows, one for shared files, one for Ubuntu. I recently find out (using hdparm) the the hardisk seems to have much better perfomance on the first 2/3 (~ 60MB/s) than on the last 1/3 (~ 40MB/s). I am thinking to delete the second partition and create new partitions for "swap" and / directly after Windows. Does this effort make sense? I also wanna upgrade to 10.4/10.10 but keep the option to go back to the old system, so maybe I install ubuntu completely in a/this new partition?

  Read the article

• Root filesystem check fails after power failure during installation

  - by Oo Nwoye

  During the "install" phase of the upgrade there was a power failure. After when starting up again the following errors are reported: init: udevtrigger main process (420) terminated with status 1 init: udevtrigger post-stop process (428) terminated with status 1 init: udevmonitor main process (419) killed by TERM signal The disk drive for / is not ready yet or not present Continue to wait; or press S to skip mounting or M for manual recovery Pressing M gives me the following message: Root filesystem check failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system.

  Read the article

• Will upgrading disrupt online backup software (Crashplan)?

  - by Rob

  Has anyone had any experience upgrading to Ubuntu 11.04, and how this might affect online backup software processes? Specifically, I'm currently running Ubuntu 10.10 and using Crashplan v3. Crashplan backup engine runs constantly in the background to monitor files for changes and back up accordingly. Will upgrading to Ubuntu 11.04 affect any of the Crashplan backup process? Has anyone done this successfully? I'd like to upgrade to the latest and greatest Ubuntu release, but not at the risk of affecting the backup, or worse, having to start from scratch again and upload the entire library!

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >