Search Results

Search found 1470 results on 59 pages for 'hangs'.

Page 51/59 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Pass dataset to subreport with SQL Server Reporting Services

  - by Juliet

  I'm using SQL Server Reporting Services and the report designer that comes with Visual Studio. I've got a really big report. It's actually so large that Visual Studio hangs (sometimes for hours at a time) or just crashes when I make changes. There is preciously little I can do to solve the problem, so I've decided to just move the bottom half of the report into a sub-report. So, I started with one enormous, unresponsive report and ended with two small, manageable reports -- surprisingly, this actually works. One problem: my subreport uses the same data as my main report. Right now, it populates its dataset by re-querying the database. The extra round-trip to the database causes the report to take twice as long to generate; up from 45 minutes to 1 1/2 hours to generate. I'd like to avoid hitting the database again, and instead use the same dataset in both reports. How can I share or pass a dataset between a report and subreport?

  Read the article

• ssh tunneling with visualsvn

  - by DeveloperChris

  I have been asked to setup visualsvn for visual studio 2008 Due to firewall restrictions and server configuration. I need to use ssh tunneling. My problem is this. The local machine needs to connect to a gateway machine via ssh then connect to the subversion server so Local machine ---{ssh}--- gateway ---{ssh}-- subversion server I am not exactly sure of the correct process to do this. It appears that I must start a ssh process using plink to open a local port and forward that to the remote subversion server. eg: plink user@gateway -L 22:192.168.1.1:22 Then when visualsvn starts it uses tortoiseplink to make the actual connection through to the subversion server using svn+ssh://username@localhost:22/myrepo This seems very very clunky. firstly it needs several steps to setup the connection secondly I need plink running which leaves a command prompt on the desktop (clutter = yuck) lastly I need to use two different programs that do the same thing. (plink + tortoiseplink) The problem is that tortoiseplink doesn't run in the background. As soon as I connect to the ssh gateway and enter the password it closes again. So I can't use it to create the initial connection. If I use plink instead of tortoiseplink in visualsvn then I never get prompted for the password. so it just hangs with an open command prompt and no password request. Is there a way to setup visualsvn so that everything happens in one command line? I have searched high and low for a suitable and clean method to tunnel from visualsvn to the remote server and have found very little. it all either assumes one hop (not two like mine) or it glosses over all the hard bits. DC

  Read the article

• C# - NetUseAdd from NetApi32.dll on Windows Server 2008 and IIS7

  - by Jack Ryan

  I am attemping to use NetUseAdd to add a share that is needed by an application. My code looks like this. [DllImport("NetApi32.dll", SetLastError = true, CharSet = CharSet.Unicode)] internal static extern uint NetUseAdd( string UncServerName, uint Level, IntPtr Buf, out uint ParmError); ... USE_INFO_2 info = new USE_INFO_2(); info.ui2_local = null; info.ui2_asg_type = 0xFFFFFFFF; info.ui2_remote = remoteUNC; info.ui2_username = username; info.ui2_password = Marshal.StringToHGlobalAuto(password); info.ui2_domainname = domainName; IntPtr buf = Marshal.AllocHGlobal(Marshal.SizeOf(info)); try { Marshal.StructureToPtr(info, buf, true); uint paramErrorIndex; uint returnCode = NetUseAdd(null, 2, buf, out paramErrorIndex); if (returnCode != 0) { throw new Win32Exception((int)returnCode); } } finally { Marshal.FreeHGlobal(buf); } This works fine on our server 2003 boxes. But in attempting to move over to Server 2008 and IIS7 this doesnt work any more. Through liberal logging i have found that it hangs on the line Marshal.StructureToPtr(info, buf, true); I have absolutely no idea why this is can anyone shed any light on it for tell me where i might look for more information?

  Read the article

• python mechanize.browser submit() related problem

  - by paul

  Hello All im making some script with mechanize.browser module. one of problem is all other thing is ok, but when submit() form,it not working, so i was found some suspicion source part. in the html source i was found such like following. <form method="post" onsubmit="return loginCheck(this)" name="FRMLOGIN"/> im thinking, loginCheck(this) making problem when submit form. but how to handle this kind of javascript function with mechanize module ,so i can successfully submit form and can receive result? folloing is my current script source. if anyone can help me ..much appreciate!! # -*- coding: cp949-*- import sys,os import mechanize, urllib import cookielib from BeautifulSoup import BeautifulSoup,BeautifulStoneSoup,Tag import datetime, time, socket import re,sys,os,mechanize,urllib,time br = mechanize.Browser() cj = cookielib.LWPCookieJar() br.set_cookiejar(cj) # Browser options br.set_handle_equiv(True) br.set_handle_gzip(True) br.set_handle_redirect(True) br.set_handle_referer(True) br.set_handle_robots(False) # Follows refresh 0 but not hangs on refresh > 0 br.set_handle_refresh(mechanize._http.HTTPRefreshProcessor(), max_time=1) # Want debugging messages? br.set_debug_http(True) br.set_debug_redirects(True) br.set_debug_responses(True) # User-Agent (this is cheating, ok?) br.addheaders = [('User-agent', 'Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.6')] br.open('http://user.buddybuddy.co.kr/Login/LoginForm.asp?URL=') html = br.response().read() print html br.select_form(name='FRMLOGIN') print br.viewing_html() br.form['ID']='zero1zero2' br.form['PWD']='012045' br.submit() print br.response().read()

  Read the article

• Opening a LWJGL window from a SWT app on Mac

  - by TomA

  I have a SWT app that opens a OpenGL window (using the LWJGL library) after a button is pressed. Works fine on Windows. On Mac, I get this error: 2010-03-05 02:28:25.315 java[1315:a07] [Java CocoaComponent compatibility mode]: Enabled 2010-03-05 02:28:25.316 java[1315:a07] [Java CocoaComponent compatibility mode]: Setting timeout for SWT to 0.100000 2010-03-05 02:28:25.317 java[1315:a07] Apple AWT Startup Exception : _createMenuRef called with existing principal MenuRef already associated with menu 2010-03-05 02:28:25.318 java[1315:a07] Apple AWT Restarting Native Event Thread The SWT window closes and then the app hangs, with no windows open. It looks like the SWT app doesn't shut down cleanly and leaves it's menu entries associated with it, which prevents the LWJGL window from opening. Mac OS X only wants one application menu. SWT doesn't free it's own menu and LWJGL wants to add another. Facts: A button in the SWT dialog is supposed to close the dialog and open a LWJGL window (org.lwjgl.opengl.Display). The button sets a static variable in the app to tell it what to do next after the SWT window is closed, so the LWJGL window is NOT being opened from a SWT callback directly. The button then closes the SWT window. I don't know the correct way of doing this but tried various combinations of shell.close, shell.dispose, display.close and display.dispose, none of them worked. They all close the window but the error occurs every time. Does anyone know what could be done to make this work?

  Read the article

• How to catch an expected (and intended) 302 response code with generic XmlHttpRequest?

  - by Anthony

  So, if you look back at my previous question about Exchange Autodiscover, you'll see that the easiet way to get the autodiscover URL is to send a non-secure, non-authenticated GET request to the server, ala: http://autodiscover.exchangeserver.org/autodiscover/autodiscover.xml The server will respond with a 302 redirect with the correct url in the Location header. I'm trying out something really simple at first with a Chrome extension, where I have: if (req.readyState==4 && req.status==302) { return req.getResponseHeader("Location"); } With another ajax call set up with the full XML Post and the user credentials, But instead Chrome hangs at this point, and a look at the developer panel shows that it is not returning back the response but instead is acting like no response was given, meanwhile showing a Uncaught Error: NETWORK_ERR: XMLHttpRequest Exception 101 in the error log. The way I see it, refering to the exact response status is about the same as "catching" it, but I'm not sure if the problem is with Chrome/WebKit or if this is how XHR requests always handle redirects. I'm not sure how to catch this so that I can get still get the headers from the response. Or would it be possible to set up a secondary XHR such that when it gets the 302, it sends a totally different request? Quick Update I just changed it so that it doesn't check the response code: if (req.readyState==4) { return req.getResponseHeader("Location"); } and instead when I alert out the value it's null. and there is still the same error and no response in the dev console. SO it seems like it either doesn't track 302 responses as responses, or something happens after that wipes that response out?

  Read the article

• Median Filter a bi-level image with JAI

  - by Mark

  I'd like to apply a Median Filter to a bi-level image and output a bi-level image. The JAI median filter seems to output an RGB image, which I'm having trouble downconverting back to bi-level. Currently I can't even get the image back into gray color-space, my code looks like this: BufferedImage src; // contains a bi-level image ParameterBlock pb = new ParameterBlock(); pb.addSource(src); pb.add(MedianFilterDescriptor.MEDIAN_MASK_SQUARE); pb.add(3); RenderedOp result = JAI.create("MedianFilter", pb); ParameterBlock pb2 = new ParameterBlock(); pb2.addSource(result); pb2.add(new double[][]{{0.33, 0.34, 0.33, 0}}); RenderedOp grayResult = JAI.create("BandCombine", pb2); BufferedImage foo = grayResult.getAsBufferedImage(); This code hangs on the grayResult line and appears not to return. I assume that I'll eventually need to call the "Binarize" operation in JAI. Edit: Actually, the code appears to be stalling once I call getAsBufferedImage(), but returns nearly instantly when the second operation ("BandCombine") is removed. Is there a better way to keep the Median Filtering in the source color domain? If not, how do I downconvert back to binary?

  Read the article

• Annoying Twisted Python problem

  - by Kalmi

  I'm trying to answer the following question out of personal interest: What is the fastest way to send 100,000 HTTP requests in Python? And this is what I have came up so far, but I'm experiencing something very stange. When installSignalHandlers is True, it just hangs. I can see that the DelayedCall instances are in reactor._newTimedCalls, but processResponse never gets called. When installSignalHandlers is False, it throws an error and works. from twisted.internet import reactor from twisted.web.client import Agent from threading import Semaphore, Thread import time concurrent = 100 s = Semaphore(concurrent) reactor.suggestThreadPoolSize(concurrent) t=Thread( target=reactor.run, kwargs={'installSignalHandlers':True}) t.daemon=True t.start() agent = Agent(reactor) def processResponse(response,url): print response.code, url s.release() def processError(response,url): print "error", url s.release() def addTask(url): req = agent.request('HEAD', url) req.addCallback(processResponse, url) req.addErrback(processError, url) for url in open('urllist.txt'): addTask(url.strip()) s.acquire() while s._Semaphore__value!=concurrent: time.sleep(0.1) reactor.stop() And here is the error that it throws when installSignalHandlers is True: (Note: This is the expected behaviour! The question is why it doesn't work when installSignalHandlers is False.) Traceback (most recent call last): File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 396, in fireEvent DeferredList(beforeResults).addCallback(self._continueFiring) File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 224, in addCallback callbackKeywords=kw) File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 213, in addCallbacks self._runCallbacks() File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 371, in _runCallbacks self.result = callback(self.result, *args, **kw) --- <exception caught here> --- File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 409, in _continueFiring callable(*args, **kwargs) File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 1165, in _reallyStartRunning self._handleSignals() File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 1105, in _handleSignals signal.signal(signal.SIGINT, self.sigInt) exceptions.ValueError: signal only works in main thread What am I doing wrong and what is the right way? I'm new to twisted.

  Read the article

• Apache unresponsive on Vista [closed]

  - by William Hudson

  I had been running Apache on Vista for around a year, but recently upgraded my workstation. I did a clean install of Vista Ultimate and installed the latest version of the Apache server for win32 (2.2.11, no SSL). The service runs fine and there were no errors reported during the install, nor are there any errors in the Apache logs. However, any attempt to access the web site on localhost (or 127.0.0.1) just hangs the browser. I have used netstat to check who is listening to port 80 and it shows httpd.exe. I have also tried adjusting the .conf file to use port 8080 but this had no effect either (except to change the netstat output). This is a development system with quite a few other pieces of software installed. However, when I tried installing IIS, it worked fine (I removed it soon after before reattempting the Apache install). Using the older 2.0 version of Apache has no effect. Windows firewall is not running. I have disabled my NOD32 anti-virus. Any ideas what is going on? Regards, William

  Read the article

• Merge replication server side foreign key violation from unpublished table

  - by Reiste

  We are using SQL Server 2005 Merge Replication with SQL CE 3.5 clients. We are using partitions with filtering for the separate subscriptions, and nHibernate for the ORM mapping. There is automatic ID range management from SQL Server for the subscriptions. We have a table, Item, and a table with a foreign key to Item - ItemHistory. Both of these are replicated down, filtered according to the subscription. Item has a column called UserId, and is filtered per subscription with this filter: WHERE UserId IN (SELECT... [complicated subselect]...) ItemHistory hangs off Item in the publication filter articles. On the server, we have a table ItemHistoryExport, which has a foreign key to ItemHistory. ItemHistoryExport is not published. Entries in the Item and ItemHistory tables are never deleted, on the server or the client. However, the "ownership" of items (and hence their ItemHistories) MAY change, which causes them to be moved from one client subscription/partition to another from time to time. When we sync, we occasionally get the following error: A row delete at '48269404 - 4108383dbb11' could not be propagated to 'MyServer\MyInstance.MyDatabase'. This failure can be caused by a constraint violation. The DELETE statement conflicted with the REFERENCE constraint "FK_ItemHistoryExport_ItemHistory". The conflict occurred in database "MyDatabase", table "dbo.ItemHistoryExport", column 'ItemHistoryId'. Can anyone help us understand why this happens? There shouldn't ever be a delete happening on the server side.

  Read the article

• Trigger element's onclick method with JQuery [ASP.NET]

  - by blu

  I have an ASP.NET server control that inherits from CheckBoxList that renders the controls with a UL and LIs. The control is set to AutoPostBack. Markup: <div id="foo"> <ul> <li> <input type="checkbox" onclick="javascript:setTimeout('__doPostBack(..." ... /> <label ... /> </li> </ul> </div> I would like to trigger the JavaScript that is rendered on the CheckBox when the parent LI is clicked. Here is what I have so far: $("#foo li").click(function() { $(this).find("input:eq(0)").trigger("click"); }); This fires a postback in FF 3.x but the event handler in the codebehind is not fired. In IE 7 a script error comes up and the browser just kind of hangs there for a bit then reloads the page. How should I be doing this?

  Read the article

• Weblogic 10.3.0 : Loosing a stateless session bean in the bean pool

  - by KlasE

  Hi, We have a strange situation where we loose a Stateless SessionBean in a Bean Pool in Weblogic 10.3.0 Since we only have one bean in the pool, this effectively hangs all incoming calls. We do not want more than one instance in the pool because of application restrictions. In the Weblogic admin console, we can see that there are 1 instance in the bean pool, 0 beans in use and 1 waiting incoming request. The question is, what can have caused the system to not send the request to the one obviously free bean instance? This happens after several hours and over 100000 incoming requests, and the same scenario worked fine in the old weblogic 8 environment. We get the following stacktrace: "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@b0d484 TIMED_WAITING sun.misc.Unsafe.park(Native Method) java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198) java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2054) weblogic.ejb.container.pool.StatelessSessionPool.waitForBean(StatelessSessionPool.java:269) weblogic.ejb.container.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:111) weblogic.ejb.container.manager.StatelessManager.preInvoke(StatelessManager.java:148) weblogic.ejb.container.internal.BaseRemoteObject.preInvoke(BaseRemoteObject.java:227) weblogic.ejb.container.internal.StatelessRemoteObject.preInvoke(StatelessRemoteObject.java:52) com.mycompany.beans.MessageLogFacace_n73y0z_EOImpl.isMyStuffValid(MessageLogFacace_n73y0z_EOImpl.java:261) com.mycompany.beans.MessageLogFacace_n73y0z_EOImpl_WLSkel.invoke(Unknown Source) weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589) weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230) weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477) weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) weblogic.security.service.SecurityManager.runAs(Unknown Source) weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473) weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118) weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Any help would be very welcome. Regards Klas

  Read the article

• Using open2300 with Ubuntu

  - by Gawain

  Hello, I am currently running Ubuntu 8.10 and have been trying to use Open2300 to read data from a Lacrosse WS-2310 weather station and report it to the WUnderground server. The program compiles fine but when I try to run it, it does one of two things: usually it pauses for about 4 minutes, then prints "could not reset" to the screen. But sometimes it just hangs forever. It seems like my computer is unable to communicate with the weather station. I have set the serial port as /dev/ttyS0 in the open2300.conf file and i have also tried /dev/ttyS1, /dev/ttyS2, etc with the same result. As far as I can tell, there are no other settings regarding how Open2300 communicates with the device. Is my serial port locked somehow? It could be something as simple as an incorrect configuration for my serial port or something, but I would have no idea how to check that or change the configuration. Any help would be greatly appreciated. thanks, Gawain EDIT: I tried some tests that i found online and everything seems to be working with my serial port... gawain@gawain:~$ ls -l /dev/ttyS* crw-rw---- 1 root dialout 4, 64 2009-07-09 10:01 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 2009-07-09 08:56 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 2009-07-09 08:56 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 2009-07-09 08:56 /dev/ttyS3 gawain@gawain:~$ setserial -a /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test gawain@gawain:~$ setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 8250, Port: 0xd028, IRQ: 18 /dev/ttyS2, UART: 8250, Port: 0xd040, IRQ: 18 /dev/ttyS3, UART: 8250, Port: 0xd050, IRQ: 18 gawain@gawain:~$ echo 12345 > /dev/ttyS0 gawain@gawain:~$ dmesg | tail -3 [ 144.424259] ppdev0: unregistered pardevice [ 145.692199] ppdev0: registered pardevice [ 145.740052] ppdev0: unregistered pardevice I also tried changing the serial port name to /dev/ttys0 (with a lowercase S) and in that case it gave me a different error, "Unable to open serial device." This suggests to me that it is able to open /dev/ttyS0 but something else is preventing it from reading the weather station. Any ideas? thanks.

  Read the article

• JDK-7 SwingWorker deadlocks?

  - by kd304

  I have a small image processing application which does multiple things at once using SwingWorker. However, if I run the following code (oversimplified excerpt), it just hangs on JDK 7 b70 (windows) but works in 6u16. It starts a new worker within another worker and waits for its result (the real app runs multiple sub-workers and waits for all this way). Did I use some wrong patterns here (as mostly there is 3-5 workers in the swingworker-pool, which has limit of 10 I think)? import javax.swing.SwingUtilities; import javax.swing.SwingWorker; public class Swing { static SwingWorker<String, Void> getWorker2() { return new SwingWorker<String, Void>() { @Override protected String doInBackground() throws Exception { return "Hello World"; } }; } static void runWorker() { SwingWorker<String, Void> worker = new SwingWorker<String, Void>() { @Override protected String doInBackground() throws Exception { SwingWorker<String, Void> sw2 = getWorker2(); sw2.execute(); return sw2.get(); } }; worker.execute(); try { System.out.println(worker.get()); } catch (Exception e) { e.printStackTrace(); } } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { @Override public void run() { runWorker(); } }); } }

  Read the article

• fsockopen soap request

  - by gosom

  I am trying to send a SOAP message to a service using php. I want to do it with fsockopen, here's is the code : <?php $fp = @fsockopen("ssl://xmlpropp.worldspan.com", 443, $errno, $errstr); if (!is_resource($fp)) { die('fsockopen call failed with error number ' . $errno . '.' . $errstr); } $soap_out = "POST /xmlts HTTP/1.1\r\n"; $soap_out .= "Host: 212.127.18.11:8800\r\n"; //$soap_out .= "User-Agent: MySOAPisOKGuys \r\n"; $soap_out .= "Content-Type: text/xml; charset='utf-8'\r\n"; $soap_out .= "Content-Length: 999\r\n\r\n"; $soap_put .= "Connection: close\r\n"; $soap_out .= "SOAPAction:\r\n"; $soap_out .= ' Worldspan This is a test '; if(!fputs($fp, $soap_out, strlen($soap_out))) echo "could not write"; echo "<xmp>".$soap_out."</xmp>"; echo "--------------------<br>"; while (!feof($fp)) { $soap_in .= fgets($fp, 100); } echo "<xmp>$soap_in</xmp>"; fclose($fp); echo "ok"; the above code just hangs . if i remove the while it types ok, so i suppose the problem is at $soap_in .= fgets($fp, 100) Any ideas of what is happening

  Read the article

• Lua task scheduling

  - by Martin

  I've been writing some scripts for a game, the scripts are written in Lua. One of the requirements the game has is that the Update method in your lua script (which is called every frame) may take no longer than about 2-3 milliseconds to run, if it does the game just hangs. I solved this problem with coroutines, all I have to do is call Multitasking.RunTask(SomeFunction) and then the task runs as a coroutine, I then have to scatter Multitasking.Yield() throughout my code, which checks how long the task has been running for, and if it's over 2 ms it pauses the task and resumes it next frame. This is ok, except that I have to scatter Multitasking.Yield() everywhere throughout my code, and it's a real mess. Ideally, my code would automatically yield when it's been running too long. So, Is it possible to take a Lua function as an argument, and then execute it line by line (maybe interpreting Lua inside Lua, which I know is possible, but I doubt it's possible if all you have is a function pointer)? In this way I could automatically check the runtime and yield if necessary between every single line.

  Read the article

• Thread implemented as a Singleton

  - by rocknroll

  Hi all, I have a commercial application made with C,C++/Qt on Linux platform. The app collects data from different sensors and displays them on GUI. Each of the protocol for interfacing with sensors is implemented using singleton pattern and threads from Qt QThreads class. All the protocols except one work fine. Each protocol's run function for thread has following structure: void <ProtocolClassName>::run() { while(!mStop) //check whether screen is closed or not { mutex.lock() while(!waitcondition.wait(&mutex,5)) { if(mStop) return; } //Code for receiving and processing incoming data mutex.unlock(); } //end while } Hierarchy of GUI. 1.Login screen. 2. Screen of action. When a user logs in from login screen, we enter the action screen where all data is displayed and all the thread's for different sensors start. They wait on mStop variable in idle time and when data arrives they jump to receiving and processing data. Incoming data for the problem protocol is 117 bytes. In the main GUI threads there are timers which when timeout, grab the running instance of protocol using <ProtocolName>::instance() function Check the update variable of singleton class if its true and display the data. When the data display is done they reset the update variable in singleton class to false. The problematic protocol has the update time of 1 sec, which is also the frame rate of protocol. When I comment out the display function it runs fine. But when display is activated the application hangs consistently after 6-7 hours. I have asked this question on many forums but haven't received any worthwhile suggestions. I Hope that here I will get some help. Also, I have read a lot of literature on Singleton, multithreading, and found that people always discourage the use of singletons especially in C++. But in my application I can think of no other design for implementation. Thanks in advance A Hapless programmer

  Read the article

• Eclipse JUnit Plugin Test very slow to re-execute Test Suite on Windows

  - by soundasleepful

  I'm having an odd, and stressing, problem with running a large JUnit Plugin test suite in Eclipse. When I try to re-run a JUnit plugin suite that has just been executed, Eclipse hangs for quite some time before it eventually wakes up and launches. It can take up to 5 minutes sometimes, and increases with the size of the suite. Visually, it appears as a GC cleanup, except that I have plenty of GC space available (400 MB freely allocated). The size of the workspace that is has to delete is well under 1 GB, and there are not too many files - definitely less than 20,000. While I was waiting for a new run to start, I decided to manually kill explorer.exe to see if it had any effect. Surprisingly, Eclipse instantly fell out of its freeze and ran as normal. This makes me think that Windows is somehow interfering with the deletion of these workspace files. They're not being put into the Recycle Bin though. The workspace is in C: which I think is out of the range of any workspace/domain stuff. Any ideas?

  Read the article

• Full text index requires dropping and recreating - why?

  - by Amjid Qureshi

  Hi all, So I've got a web app running on .net 3.5 connected to a SQL 2005 box. We do scheduled releases every 2 weeks. About 14 tables out of 250 are full text indexed. After not every release, but a few too many, the indexes crap out. They seem to have data in there, but when we try to search them from the front end or SQL enterprise we get timeouts/hangs. We have a script that disables the indexes, drops them, deletes the catalog and then re creates the indexes. This fixes the problem 99 times out of 100. and the one other time, we run the script again and it all works We have tried just rebuilding the fulltext index but that doesn't fix the issue. My question is why do we have to do this ? what can we do to sort the index out? Here is a bit of the script, IF EXISTS (SELECT * FROM sys.fulltext_indexes fti WHERE fti.object_id = OBJECT_ID(N'[dbo].[Address]')) ALTER FULLTEXT INDEX ON [dbo].[Address] DISABLE GO IF EXISTS (SELECT * FROM sys.fulltext_indexes fti WHERE fti.object_id = OBJECT_ID(N'[dbo].[Address]')) DROP FULLTEXT INDEX ON [dbo].[Address] GO IF EXISTS (SELECT * FROM sysfulltextcatalogs ftc WHERE ftc.name = N'DbName.FullTextCatalog') DROP FULLTEXT CATALOG [DbName.FullTextCatalog] GO -- may need this line if we get an error BACKUP LOG SMS2 WITH TRUNCATE_ONLY CREATE FULLTEXT CATALOG [DbName.FullTextCatalog] ON FILEGROUP [FullTextCatalogs] IN PATH N'F:\Data' AS DEFAULT AUTHORIZATION [dbo] CREATE FULLTEXT INDEX ON [Address](CommonPlace LANGUAGE 'ENGLISH') KEY INDEX PK_Address ON [DbName.FullTextCatalog] WITH CHANGE_TRACKING AUTO go

  Read the article

• Why does Clojure hang after hacing performed my calculations?

  - by Thomas

  Hi all, I'm experimenting with filtering through elements in parallel. For each element, I need to perform a distance calculation to see if it is close enough to a target point. Never mind that data structures already exist for doing this, I'm just doing initial experiments for now. Anyway, I wanted to run some very basic experiments where I generate random vectors and filter them. Here's my implementation that does all of this (defn pfilter [pred coll] (map second (filter first (pmap (fn [item] [(pred item) item]) coll)))) (defn random-n-vector [n] (take n (repeatedly rand))) (defn distance [u v] (Math/sqrt (reduce + (map #(Math/pow (- %1 %2) 2) u v)))) (defn -main [& args] (let [[n-str vectors-str threshold-str] args n (Integer/parseInt n-str) vectors (Integer/parseInt vectors-str) threshold (Double/parseDouble threshold-str) random-vector (partial random-n-vector n) u (random-vector)] (time (println n vectors (count (pfilter (fn [v] (< (distance u v) threshold)) (take vectors (repeatedly random-vector)))))))) The code executes and returns what I expect, that is the parameter n (length of vectors), vectors (the number of vectors) and the number of vectors that are closer than a threshold to the target vector. What I don't understand is why the programs hangs for an additional minute before terminating. Here is the output of a run which demonstrates the error $ time lein run 10 100000 1.0 [null] 10 100000 12283 [null] "Elapsed time: 3300.856 msecs" real 1m6.336s user 0m7.204s sys 0m1.495s Any comments on how to filter in parallel in general are also more than welcome, as I haven't yet confirmed that pfilter actually works.

  Read the article

• Nginx not responding to remote IP

  - by bucabay

  I just installed Nginx listening on 8083 I can get a HTTP response when sending a HTTP request from the local machine. eg: curl -i localhost:8083 However, when I do the same from a remote machine, it just hangs until the ssh times out, or when the browser times out if accessed from the browser. I pretty much have the default config: user apache apache; worker_processes 1; error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 8083; server_name _; charset utf-8; #access_log logs/host.access.log main; location / { root html; index index.html index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ /\.ht { deny all; } } } any ideas?

  Read the article

• reactor not working when reactor.run is not called in the main thread and installSignalHandlers=Fals

  - by Kalmi

  I'm trying to answer the following question out of personal interest: What is the fastest way to send 100,000 HTTP requests in Python? And this is what I have came up so far, but I'm experiencing something very stange. When installSignalHandlers is True, it just hangs. I can see that the DelayedCall instances are in reactor._newTimedCalls, but processResponse never gets called. When installSignalHandlers is False, it throws an error and works. from twisted.internet import reactor from twisted.web.client import Agent from threading import Semaphore, Thread import time concurrent = 100 s = Semaphore(concurrent) reactor.suggestThreadPoolSize(concurrent) t=Thread( target=reactor.run, kwargs={'installSignalHandlers':True}) t.daemon=True t.start() agent = Agent(reactor) def processResponse(response,url): print response.code, url s.release() def processError(response,url): print "error", url s.release() def addTask(url): req = agent.request('HEAD', url) req.addCallback(processResponse, url) req.addErrback(processError, url) for url in open('urllist.txt'): addTask(url.strip()) s.acquire() while s._Semaphore__value!=concurrent: time.sleep(0.1) reactor.stop() And here is the error that it throws when installSignalHandlers is True: (Note: This is the expected behaviour! The question is why it doesn't work when installSignalHandlers is False.) Traceback (most recent call last): File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 396, in fireEvent DeferredList(beforeResults).addCallback(self._continueFiring) File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 224, in addCallback callbackKeywords=kw) File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 213, in addCallbacks self._runCallbacks() File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 371, in _runCallbacks self.result = callback(self.result, *args, **kw) --- <exception caught here> --- File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 409, in _continueFiring callable(*args, **kwargs) File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 1165, in _reallyStartRunning self._handleSignals() File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 1105, in _handleSignals signal.signal(signal.SIGINT, self.sigInt) exceptions.ValueError: signal only works in main thread What am I doing wrong and what is the right way? I'm new to twisted.

  Read the article

• xmlrpc client call in python does not come back

  - by Jack Ha

  Using Python 2.6.4, windows With the following script I want to test a certain xmlrpc server. I call a non-existent function and hope for a traceback with an error. Instead, the function does not return. What could be the cause? import xmlrpclib s = xmlrpclib.Server("http://127.0.0.1:80", verbose=True) s.functioncall() The output is: send: 'POST /RPC2 HTTP/1.0\r\nHost: 127.0.0.1:80\r\nUser-Agent: xmlrpclib.py/1.0 .1 (by www.pythonware.com)\r\nContent-Type: text/xml\r\nContent-Length: 106\r\n\ r\n' send: "<?xml version='1.0'?>\n<methodCall>\n<methodName>functioncall</methodName >\n<params>\n</params>\n</methodCall>\n" reply: 'HTTP/1.1 200 OK\r\n' header: Content-Type: text/xml header: Cache-Control: no-cache header: Content-Length: 376 header: Date: Tue, 30 Mar 2010 13:27:21 GMT body: '<?xml version="1.0"?>\r\n<methodResponse>\r\n<fault>\r\n<value>\r\n<struc t>\r\n<member>\r\n<name>faultCode</name>\r\n<value><i4>1</i4></value>\r\n</membe r>\r\n<member>\r\n<name>faultString</name>\r\n<value><string>PVSS00ctrl (2), 2 010.03.30 15:27:21.395, CTRL, SEVERE, 72, Function not defined, functioncall , , \n</string></value>\r\n</member>\r\n</struct>\r\n</value>\r\n</fault>\r\n</m ethodResponse>\r\n' (here the program hangs and does not return until I kill the server) edit: the server is written in c++, using its own xmlrpc library

  Read the article

• Warning: passing Argument 1 of "sqlite3_bind_text" from incompatible pointer type" What should I do

  - by Amarpreet

  Hi All, i am pretty new in iphone development. I have created one function to insert data into database. The code compiles successfully. But when comes to statement sqlite3_bind_text(sqlStatement, 1, [s UTF8String], -1, SQLITE_TRANSIENT); it does not do anything but hangs AND in warning it says "passing Argument 1 of "sqlite3_bind_text" from incompatible pointer type"" for all statements in Red colour The same code i am using to fetch the data from database and its working on other viewController. Below in the code. Its pretty straightforward. Please help guys. -(void) SaveData: (NSString *)FirstName: (NSString *)LastName: (NSString *)State: (NSString *)Street: (NSString *)PostCode { databaseName = @"Zen.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDire ctory, NSUserDomainMask,YES); NSString *documentsDir=[documentPaths objectAtIndex:0]; databasePath=[documentsDir stringByAppendingPathComponent:databaseName]; sqlite3 *database; if(sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { const char *sqlStatement = "insert into customers (FirstName, LastName, State, Street, PostCode) values(?, ?, ?, ?, ?)"; sqlite3_stmt *compiledStatement; sqlite3_prepare_v2(database, sqlStatement, -1, &compiledStatement, NULL); sqlite3_bind_text(sqlStatement, 1, [FirstName UTF8String], -1, SQLITE_TRANSIENT); sqlite3_bind_text(sqlStatement,2,[LastName UTF8String],-1,SQLITE_TRANSIENT); sqlite3_bind_text(sqlStatement,3,[State UTF8String],-1,SQLITE_TRANSIENT); sqlite3_bind_text(sqlStatement,4,[Street UTF8String],-1,SQLITE_TRANSIENT); sqlite3_bind_text(sqlStatement,5,[PostCode UTF8String],-1,SQLITE_TRANSIENT); sqlite3_step(sqlStatement); sqlite3_finalize(compiledStatement); } sqlite3_close(database); }

  Read the article

• ASP.NET lock thread method

  - by Peter

  Hello, I'm developing an ASP.NET forms webapplication using C#. I have a method which creates a new Order for a customer. It looks similar to this; private string CreateOrder(string userName) { // Fetch current order Order order = FetchOrder(userName); if (order.OrderId == 0) { // Has no order yet, create a new one order.OrderNumber = Utility.GenerateOrderNumber(); order.Save(); } return order; } The problem here is, it is possible that 1 customer in two requests (threads) could cause this method to be called twice while another thread is also inside this method. This can cause two orders to be created. How can I properly lock this method, so it can only be executed by one thread at a time per customer? I tried; Mutex mutex = null; private string CreateOrder(string userName) { if (mutex == null) { mutex = new Mutex(true, userName); } mutex.WaitOne(); // Code from above mutex.ReleaseMutex(); mutex = null; return order; } This works, but on some occasions it hangs on WaitOne and I don't know why. Is there an error, or should I use another method to lock? Thanks

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >