Search Results

Search found 6242 results on 250 pages for 'named pipe'.

Page 51/250 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • When things go awry

    - by Phil Factor
    The moment the Entrepreneur opened his mouth on prime-time national TV, spelled out the URL and waxed big on how exciting ‘his’ new website was, I knew I was in for a busy night. I’d designed and built it. All at once, half a million people tried to log into the website. Although all my stress-testing paid off, I have to admit that the network locked up tight long before there was any danger of a database or website problem. Soon afterwards, the Entrepreneur and the Big Boss were there in the autopsy meeting. We picked through all our systems in detail to see how they’d borne the unexpected strain. Mercifully, in view of the sour mood of the Big Boss, it turned out that the only thing we could have done better was buy a bigger pipe to and from the internet. We’d specified that ‘big pipe’ when designing the system. The Big Boss had then railed at the cost and so we’d subsequently compromised. I felt that my design decisions were vindicated. The Big Boss brooded for a while. Then he made the significant comment: “What really ****** me off is the fact that, for ten minutes, we couldn’t take people’s money.” At that point I stopped feeling smug. Had the internet connection been better, the system would have reached its limit and failed rather precipitously, and that wasn’t what he wanted. Then it occurred to me that what had gummed up the connection was all those images on the site, that had made it so impressive for the visitors. If there had been a way to automatically pare down the site to the bare essentials under stress… Hmm. I began to consider disaster-recovery in the broadest sense – maintaining a service in spite of unusual or unexpected events. What he said makes a lot of sense: sacrifice whatever isn’t essential to keep the core service running when we approach the capacity limits. Maybe in IT we should borrow (or revive) the business concept of the ‘Skeleton service’, maintaining only the priority parts under stress, using a process that is well-prepared and carefully rehearsed. How might this work? Whatever the event we have to prepare for, it is all about understanding the priorities; knowing what one can dispense with when the going gets tough. In the event of database disaster, it’s much faster to deploy a skeletal system with only the essential data than to restore the entire system, though there would have to be a reconciliation process to update the revived database retrospectively, once the emergency was over. It isn’t just the database that could be designed for resilience. One could prepare for unusually high traffic in a website by designing a system that degraded gradually to a ‘skeletal’ site, one that maintained the commercial essentials without fat images, JavaScript libraries and razzmatazz. This is all what the Big Boss scathingly called ‘a mere technicality’. It seems to me that what is needed first is a culture of application and database design which acknowledges that we live in a very imperfect world, and react accordingly when things go awry.

    Read the article

  • 10 Essential Tools for building ASP.NET Websites

    - by Stephen Walther
    I recently put together a simple public website created with ASP.NET for my company at Superexpert.com. I was surprised by the number of free tools that I ended up using to put together the website. Therefore, I thought it would be interesting to create a list of essential tools for building ASP.NET websites. These tools work equally well with both ASP.NET Web Forms and ASP.NET MVC. Performance Tools After reading Steve Souders two (very excellent) books on front-end website performance High Performance Web Sites and Even Faster Web Sites, I have been super sensitive to front-end website performance. According to Souders’ Performance Golden Rule: “Optimize front-end performance first, that's where 80% or more of the end-user response time is spent” You can use the tools below to reduce the size of the images, JavaScript files, and CSS files used by an ASP.NET application. 1. Sprite and Image Optimization Framework CSS sprites were first described in an article written for A List Apart entitled CSS sprites: Image Slicing’s Kiss of Death. When you use sprites, you combine multiple images used by a website into a single image. Next, you use CSS trickery to display particular sub-images from the combined image in a webpage. The primary advantage of sprites is that they reduce the number of requests required to display a webpage. Requesting a single large image is faster than requesting multiple small images. In general, the more resources – images, JavaScript files, CSS files – that must be moved across the wire, the slower your website. However, most people avoid using sprites because they require a lot of work. You need to combine all of the images and write just the right CSS rules to display the sub-images. The Microsoft Sprite and Image Optimization Framework enables you to avoid all of this work. The framework combines the images for you automatically. Furthermore, the framework includes an ASP.NET Web Forms control and an ASP.NET MVC helper that makes it easy to display the sub-images. You can download the Sprite and Image Optimization Framework from CodePlex at http://aspnet.codeplex.com/releases/view/50869. The Sprite and Image Optimization Framework was written by Morgan McClean who worked in the office next to mine at Microsoft. Morgan was a scary smart Intern from Canada and we discussed the Framework while he was building it (I was really excited to learn that he was working on it). Morgan added some great advanced features to this framework. For example, the Sprite and Image Optimization Framework supports something called image inlining. When you use image inlining, the actual image is stored in the CSS file. Here’s an example of what image inlining looks like: .Home_StephenWalther_small-jpg { width:75px; height:100px; background: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAEsAAABkCAIAAABB1lpeAAAAB GdBTUEAALGOfPtRkwAAACBjSFJNAACHDwAAjA8AAP1SAACBQAAAfXkAAOmLAAA85QAAGcxzPIV3AAAKL s+zNfREAAAAASUVORK5CYII=) no-repeat 0% 0%; } The actual image (in this case a picture of me that is displayed on the home page of the Superexpert.com website) is stored in the CSS file. If you visit the Superexpert.com website then very few separate images are downloaded. For example, all of the images with a red border in the screenshot below take advantage of CSS sprites: Unfortunately, there are some significant Gotchas that you need to be aware of when using the Sprite and Image Optimization Framework. There are workarounds for these Gotchas. I plan to write about these Gotchas and workarounds in a future blog entry. 2. Microsoft Ajax Minifier Whenever possible you should combine, minify, compress, and cache with a far future header all of your JavaScript and CSS files. The Microsoft Ajax Minifier makes it easy to minify JavaScript and CSS files. Don’t confuse minification and compression. You need to do both. According to Souders, you can reduce the size of a JavaScript file by an additional 20% (on average) by minifying a JavaScript file after you compress the file. When you minify a JavaScript or CSS file, you use various tricks to reduce the size of the file before you compress the file. For example, you can minify a JavaScript file by replacing long JavaScript variables names with short variables names and removing unnecessary white space and comments. You can minify a CSS file by doing such things as replacing long color names such as #ffffff with shorter equivalents such as #fff. The Microsoft Ajax Minifier was created by Microsoft employee Ron Logan. Internally, this tool was being used by several large Microsoft websites. We also used the tool heavily on the ASP.NET team. I convinced Ron to publish the tool on CodePlex so that everyone in the world could take advantage of it. You can download the tool from the ASP.NET Ajax website and read documentation for the tool here. I created the installer for the Microsoft Ajax Minifier. When creating the installer, I also created a Visual Studio build task to make it easy to minify all of your JavaScript and CSS files whenever you do a build within Visual Studio automatically. Read the Ajax Minifier Quick Start to learn how to configure the build task. 3. ySlow The ySlow tool is a free add-on for Firefox created by Yahoo that enables you to test the front-end of your website. For example, here are the current test results for the Superexpert.com website: The Superexpert.com website has an overall score of B (not perfect but not bad). The ySlow tool is not perfect. For example, the Superexpert.com website received a failing grade of F for not using a Content Delivery Network even though the website using the Microsoft Ajax Content Delivery Network for JavaScript files such as jQuery. Uptime After publishing a website live to the world, you want to ensure that the website does not encounter any issues and that it stays live. I use the following tools to monitor the Superexpert.com website now that it is live. 4. ELMAH ELMAH stands for Error Logging Modules and Handlers for ASP.NET. ELMAH enables you to record any errors that happen at your website so you can review them in the future. You can download ELMAH for free from the ELMAH project website. ELMAH works great with both ASP.NET Web Forms and ASP.NET MVC. You can configure ELMAH to store errors in a number of different stores including XML files, the Event Log, an Access database, a SQL database, an Oracle database, or in computer RAM. You also can configure ELMAH to email error messages to you when they happen. By default, you can access ELMAH by requesting the elmah.axd page from a website with ELMAH installed. Here’s what the elmah page looks like from the Superexpert.com website (this page is password-protected because secret information can be revealed in an error message): If you click on a particular error message, you can view the original Yellow Screen ASP.NET error message (even when the error message was never displayed to the actual user). I installed ELMAH by taking advantage of the new package manager for ASP.NET named NuGet (originally named NuPack). You can read the details about NuGet in the following blog entry by Scott Guthrie. You can download NuGet from CodePlex. 5. Pingdom I use Pingdom to verify that the Superexpert.com website is always up. You can sign up for Pingdom by visiting Pingdom.com. You can use Pingdom to monitor a single website for free. At the Pingdom website, you configure the frequency that your website gets pinged. I verify that the Superexpert.com website is up every 5 minutes. I have the Pingdom service verify that it can retrieve the string “Contact Us” from the website homepage. If your website goes down, you can configure Pingdom so that it sends an email, Twitter, SMS, or iPhone alert. I use the Pingdom iPhone app which looks like this: 6. Host Tracker If your website does go down then you need some way of determining whether it is a problem with your local network or if your website is down for everyone. I use a website named Host-Tracker.com to check how badly a website is down. Here’s what the Host-Tracker website displays for the Superexpert.com website when the website can be successfully pinged from everywhere in the world: Notice that Host-Tracker pinged the Superexpert.com website from 68 locations including Roubaix, France and Scranton, PA. Debugging I mean debugging in the broadest possible sense. I use the following tools when building a website to verify that I have not made a mistake. 7. HTML Spell Checker Why doesn’t Visual Studio have a built-in spell checker? Don’t know – I’ve always found this mysterious. Fortunately, however, a former member of the ASP.NET team wrote a free spell checker that you can use with your ASP.NET pages. I find a spell checker indispensible. It is easy to delude yourself that you are capable of perfect spelling. I’m always super embarrassed when I actually run the spell checking tool and discover all of my spelling mistakes. The fastest way to add the HTML Spell Checker extension to Visual Studio is to select the menu option Tools, Extension Manager within Visual Studio. Click on Online Gallery and search for HTML Spell Checker: 8. IIS SEO Toolkit If people cannot find your website through Google then you should not even bother to create it. Microsoft has a great extension for IIS named the IIS Search Engine Optimization Toolkit that you can use to identify issue with your website that would hurt its page rank. You also can use this tool to quickly create a sitemap for your website that you can submit to Google or Bing. You can even generate the sitemap for an ASP.NET MVC website. Here’s what the report overview for the Superexpert.com website looks like: Notice that the Sueprexpert.com website had plenty of violations. For example, there are 65 cases in which a page has a broken hyperlink. You can drill into these violations to identity the exact page and location where these violations occur. 9. LinqPad If your ASP.NET website accesses a database then you should be using LINQ to Entities with the Entity Framework. Using LINQ involves some magic. LINQ queries written in C# get converted into SQL queries for you. If you are not careful about how you write your LINQ queries, you could unintentionally build a really badly performing website. LinqPad is a free tool that enables you to experiment with your LINQ queries. It even works with Microsoft SQL CE 4 and Azure. You can use LinqPad to execute a LINQ to Entities query and see the results. You also can use it to see the resulting SQL that gets executed against the database: 10. .NET Reflector I use .NET Reflector daily. The .NET Reflector tool enables you to take any assembly and disassemble the assembly into C# or VB.NET code. You can use .NET Reflector to see the “Source Code” of an assembly even when you do not have the actual source code. You can download a free version of .NET Reflector from the Redgate website. I use .NET Reflector primarily to help me understand what code is doing internally. For example, I used .NET Reflector with the Sprite and Image Optimization Framework to better understand how the MVC Image helper works. Here’s part of the disassembled code from the Image helper class: Summary In this blog entry, I’ve discussed several of the tools that I used to create the Superexpert.com website. These are tools that I use to improve the performance, improve the SEO, verify the uptime, or debug the Superexpert.com website. All of the tools discussed in this blog entry are free. Furthermore, all of these tools work with both ASP.NET Web Forms and ASP.NET MVC. Let me know if there are any tools that you use daily when building ASP.NET websites.

    Read the article

  • Unable to install SQL 2008 on Windows 7

    - by Axel
    SQL 2008 install hangs on Windows 7 The story: Trying to install SQL2008 on Windows 7 hangs on SqlEngineDBStartconfigAction_install_configrc_Cpu32. What I Tried: Uninstall hangs on validation Manual uninstall using msiinv.exe and msiexec /x works Added SQL service accounts to local admins no help Turn of UAC no help Last lines in setup log: 2010-04-01 16:18:05 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle' 2010-04-01 16:18:05 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' to be created 2010-04-01 16:18:07 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' or sql process handle to be signaled 2010-04-01 16:18:07 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents' 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize script 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize default connection string 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NotSpecified 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NamedPipes 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup 2010-04-01 16:18:53 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect' 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL.... 2010-04-01 16:18:53 Slp: Sco: Attempting to connect script 2010-04-01 16:18:53 Slp: Connection string: Data Source=\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup And now comes the fun part: When I open conf mgr I can see the service running, I enabled named pipes and TCP/IP, restarted the service I'm able to connect to the server using an OLE DB connection but not with the Native Client. And what I find suspicious is the following error in my app log: .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\Tools\VDT\DataProjects.dll . Error code = 0x8007000b In MS connect this is reported as a bug but MS is unable to reproduce the problem altough when you search the fora I'm not the only one with this problem. So any help is appreciated.

    Read the article

  • Noob Objective-C/C++ - Linker Problem/Function Def Problem

    - by Josh
    There is a static class Pipe, defined in C++ header that I'm including. The function I'm interested in calling (from Objetive-c) is here: static ERC SendUserGet(const UserId &_idUser,const GUID &_idStyle,const ZoneId &_idZone,const char *_pszMsg); I have access to an objetive-c data structure that appears to store a copy of userID, and zoneID -- it looks like: @interface DataBlock : NSObject { GUID userID; GUID zoneID; } Looked up the GUID def, and its a struct with a bunch of overloaded operators for equality. UserId and ZoneId from the first function signature are #typedef GUID Now when I try to call the function, no matter how I cast it (const UserId), (UserId), etc, I get the following linker error: "Pipe::SendUserGet(_GUID const&, _GUID const&, _GUID const&, char const*)", referenced from: -[PeoplePaneController clickGet:] in PeoplePaneController.o Is this a type/function signature error, or truly some sort of linker error? I have the headers where all these types and static classes are defined #imported -- I tried #include too, just in case, since I'm already stumbling :P Forgive me, I come from a web tech background, so this c-style memory management and immutability stuff is super hazy. Thanks, Josh

    Read the article

  • MySQL Connection Timeout Issue - Grails Application on Tomcat using Hibernate and ORM

    - by gav
    Hi Guys I have a small grails application running on Tomcat in Ubuntu on a VPS. I use MySql as my datastore and everything works fine unless I leave the application for more than half a day (8 hours?). I did some searching and apparently this is the default wait_timeout in mysql.cnf so after 8 hours the connection will die but Tomcat won't know so when the next user tries to view the site they will see the connection failure error. Refreshing the page will fix this but I want to get rid of the error altogether. For my version of MySql (5.0.75) I have only my.cnf and it doesn't contain such a parameter, In any case changing this parameter doesn't solve the problem. This Blog Post seems to be reporting a similar error but I still don't fully understand what I need to configure to get this fixed and also I am hoping that there is a simpler solution than another third party library. The machine I'm running on has 256MB ram and I'm trying to keep the number of programs/services running to a minimum. Is there something I can configure in Grails / Tomcat / MySql to get this to go away? Thanks in advance, Gav From my Catalina.out; 2010-04-29 21:26:25,946 [http-8080-2] ERROR util.JDBCExceptionReporter - The last packet successfully received from the server was 102,906,722 milliseconds$ 2010-04-29 21:26:25,994 [http-8080-2] ERROR errors.GrailsExceptionResolver - Broken pipe java.net.SocketException: Broken pipe at java.net.SocketOutputStream.socketWrite0(Native Method) ... 2010-04-29 21:26:26,016 [http-8080-2] ERROR util.JDBCExceptionReporter - Already closed. 2010-04-29 21:26:26,016 [http-8080-2] ERROR util.JDBCExceptionReporter - Already closed. 2010-04-29 21:26:26,017 [http-8080-2] ERROR servlet.GrailsDispatcherServlet - HandlerInterceptor.afterCompletion threw exception org.hibernate.exception.GenericJDBCException: Cannot release connection at java.lang.Thread.run(Thread.java:619) Caused by: java.sql.SQLException: Already closed. at org.apache.commons.dbcp.PoolableConnection.close(PoolableConnection.java:84) at org.apache.commons.dbcp.PoolingDataSource$PoolGuardConnectionWrapper.close(PoolingDataSource.java:181) ... 1 more

    Read the article

  • Android RestTemplate Ok on emulator but fails on real device

    - by Hossein
    I'm using spring RestTemplate and it works perfect on emulator but if I run my app on real device I get HttpMessageNotWritableException ............ nested exception is java.net.SocketException: Broken pipe Here is some lines of my code(keep in mind my app works perfect on emulator) ............ LoggerUtil.logToFile(TAG, "url is [" + url + "]"); LoggerUtil.logToFile(TAG, "NetworkInfo - " + connectivityManager.getActiveNetworkInfo()); ResponseEntity<T> responseEntity = restTemplate.exchange(url, HttpMethod.POST, requestEntity, clazz); ............. I know my device's network works perfect because all other applications on my device are working and also using device browser I'm able to connect to my server so my server is available. My server is up and running and my device is able to connect to my server so why I get java.net.SocketException: Broken pipe ?!!!!!!! Before I call restTemplate.exchange() I log NetworkInfo and it looks ok -type: WIFI -status: CONNECTED/CONNECTED -isAvailable: true Thanks in advance. Update: It is really weird Even if I use HttpURLConnection, it works perfectly on emulator but on real device I get 400 Bad Request Here is my code HttpURLConnection con = null; try { String url = ....; LoggerUtil.logToFile(TAG, "url [" + url + "]" ); con = (HttpURLConnection) new URL(url).openConnection(); con.setRequestMethod("POST"); con.setRequestProperty("Connection", "Keep-Alive"); con.setDoInput(true); con.setDoOutput(true); con.setUseCaches(false); con.connect(); LoggerUtil.logToFile(TAG, "con.getResponseCode is " + con.getResponseCode()); LoggerUtil.logToFile(TAG, "con.getResponseMessage is " + con.getResponseMessage()); } catch(Throwable t){ LoggerUtil.logToFile(TAG, "*** failed [" + t + "]" ); } in log file I see con.getResponseCode is 400 con.getResponseMessage is Bad Request

    Read the article

  • Best pattern for storing (product) attributes in SQL Server

    - by EdH
    We are starting a new project where we need to store product and many product attributes in a database. The technology stack is MS SQL 2008 and Entity Framework 4.0 / LINQ for data access. The products (and Products Table) are pretty straightforward (a SKU, manufacturer, price, etc..). However there are also many attributes to store with each product (think industrial widgets). These may range from color to certification(s) to pipe size. Every product may have different attributes, and some may have multiples of the same attribute (Ex: Certifications). The current proposal is that we will basically have a name/value pair table with a FK back to the product ID in each row. An example of the attributes Table may look like this: ProdID AttributeName AttributeValue 123 Color Blue 123 FittingSize 1.25 123 Certification AS1111 123 Certification EE2212 123 Certification FM.3 456 Pipe 11 678 Color Red 999 Certification AE1111 ... Note: Attribute name would likely come from a lookup table or enum. So the main question here is: Is this the best pattern for doing something like this? How will the performance be? Queries will be based on a JOIN of the product and attributes table, and generally need many WHEREs to filter on specific attributes - the most common search will be to find a product based on a set of known/desired attributes. If anyone has any suggestions or a better pattern for this type of data, please let me know. Thanks! -Ed

    Read the article

  • How to replace openSSL calls with C# code?

    - by fonix232
    Hey there again! Today I ran into a problem when I was making a new theme creator for chrome. As you may know, Chrome uses a "new" file format, called CRX, to manage it's plugins and themes. It is a basic zip file, but a bit modified: "Cr24" + derkey + signature + zipFile And here comes the problem. There are only two CRX creators, written in Ruby or Python. I don't know neither language too much (had some basic experience in Python though, but mostly with PyS60), so I would like to ask you to help me convert this python app to a C# code that doesn't depend on external programs. Also, here is the source of crxmake.py: #!/usr/bin/python # Cribbed from http://github.com/Constellation/crxmake/blob/master/lib/crxmake.rb # and http://src.chromium.org/viewvc/chrome/trunk/src/chrome/tools/extensions/chromium_extension.py?revision=14872&content-type=text/plain&pathrev=14872 # from: http://grack.com/blog/2009/11/09/packing-chrome-extensions-in-python/ import sys from array import * from subprocess import * import os import tempfile def main(argv): arg0,dir,key,output = argv # zip up the directory input = dir + ".zip" if not os.path.exists(input): os.system("cd %(dir)s; zip -r ../%(input)s . -x '.svn/*'" % locals()) else: print "'%s' already exists using it" % input # Sign the zip file with the private key in PEM format signature = Popen(["openssl", "sha1", "-sign", key, input], stdout=PIPE).stdout.read(); # Convert the PEM key to DER (and extract the public form) for inclusion in the CRX header derkey = Popen(["openssl", "rsa", "-pubout", "-inform", "PEM", "-outform", "DER", "-in", key], stdout=PIPE).stdout.read(); out=open(output, "wb"); out.write("Cr24") # Extension file magic number header = array("l"); header.append(2); # Version 2 header.append(len(derkey)); header.append(len(signature)); header.tofile(out); out.write(derkey) out.write(signature) out.write(open(input).read()) os.unlink(input) print "Done." if __name__ == '__main__': main(sys.argv) Please could you help me?

    Read the article

  • Custom SSL handling stopped working on Android 2.2 FroYo

    - by Eric
    For my app, Transdroid, I am connecting to remote servers via HTTP and optionally securely via HTTPS. For these HTTPS connections with the HttpClient I am using a custom SSL socket factory implementation to make sure self-signed certificates are working. Basically, I accept everything and ignore every checking of any certificate. This has been working fine for some time now, but it no longer work for Android 2.2 FroYo. When trying to connect, it will return an exception: java.io.IOException: SSL handshake failure: I/O error during system call, Broken pipe Here is how I initialize the HttpClient: SchemeRegistry registry = new SchemeRegistry(); registry.register(new Scheme("http", new PlainSocketFactory(), 80)); registry.register(new Scheme("https", (trustAll ? new FakeSocketFactory() : SSLSocketFactory.getSocketFactory()), 443)); client = new DefaultHttpClient(new ThreadSafeClientConnManager(httpParams, registry), httpParams); I make use of a FakeSocketFactory and FakeTrustManager, of which the source can be found here: http://code.google.com/p/transdroid/source/browse/#svn/trunk/src/org/transdroid/util Again, I don't understand why it suddenly stopped work, or even what the error 'Broken pipe' means. I have seen messages on Twitter that Seesmic and Twidroid fail with SSL enabled on FroYo as well, but am unsure if it's related. Thanks for any directions/help!

    Read the article

  • NoSuchMethodError: com/sun/istack/logging/Logger.getLogger

    - by pandi-sus
    I developed a webservice and deployed it to websphere 7.0 and developed a dynamic dispatch client using JAX-WS APIs which also runs on same application server. I get error at the following line: Dispatch dispatch = service.createDispatch(portName, SOAPMessage.class, Service.Mode.MESSAGE); Error: Caused by: java.lang.NoSuchMethodError: com/sun/istack/logging/Logger.getLogger(Ljava/lang/Class;)Lcom/sun/istack/logging/Logger; at com.sun.xml.ws.api.config.management.policy.ManagementAssertion.(ManagementAssertion.java:87) at java.lang.J9VMInternals.initializeImpl(Native Method) at java.lang.J9VMInternals.initialize(J9VMInternals.java:200) at java.lang.J9VMInternals.initialize(J9VMInternals.java:167) at com.sun.xml.ws.server.MonitorBase.createManagedObjectManager(MonitorBase.java:177) at com.sun.xml.ws.client.Stub.(Stub.java:196) at com.sun.xml.ws.client.Stub.(Stub.java:174) at com.sun.xml.ws.client.dispatch.DispatchImpl.(DispatchImpl.java:129) at com.sun.xml.ws.client.dispatch.SOAPMessageDispatch.(SOAPMessageDispatch.java:77) at com.sun.xml.ws.api.pipe.Stubs.createSAAJDispatch(Stubs.java:143) at com.sun.xml.ws.api.pipe.Stubs.createDispatch(Stubs.java:264) at com.sun.xml.ws.client.WSServiceDelegate.createDispatch(WSServiceDelegate.java:390) at com.sun.xml.ws.client.WSServiceDelegate.createDispatch(WSServiceDelegate.java:401) at com.sun.xml.ws.client.WSServiceDelegate.createDispatch(WSServiceDelegate.java:383) at javax.xml.ws.Service.createDispatch(Service.java:336) I included the following dependency. javax.xml.ws jaxws-api 2.1 I also tried adding policy dependency (versions - 2.2 and 2.2.1) com.sun.xml.ws policy 2.2.1 Any ideas on what more dependencies I need to add?

    Read the article

  • Why does perl crash with "*** glibc detected *** perl: munmap_chunk(): invalid pointer"?

    - by sid_com
    #!/usr/bin/env perl use warnings; use strict; use 5.012; use XML::LibXML::Reader; my $reader = XML::LibXML::Reader->new( location => 'http://www.heise.de/' ) or die $!; while ( $reader->read ) { say $reader->name; } At the end of the output from this script I get this error-messages: * glibc detected * perl: munmap_chunk(): invalid pointer: 0x0000000000b362e0 * ======= Backtrace: ========= /lib64/libc.so.6[0x7fb84952fc76] ... ======= Memory map: ======== 00400000-0053d000 r-xp 00000000 08:01 182002 /usr/local/bin/perl ... Is this due a bug? perl -V: Summary of my perl5 (revision 5 version 12 subversion 0) configuration: Platform: osname=linux, osvers=2.6.31.12-0.2-desktop, archname=x86_64-linux uname='linux linux1 2.6.31.12-0.2-desktop #1 smp preempt 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 gnulinux ' config_args='-Dnoextensions=ODBM_File' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include' ccversion='', gccversion='4.4.1 [gcc-4_4-branch revision 150839]', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -fstack-protector -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64 libs=-lnsl -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.10.1.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.10.1' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector' Characteristics of this binary (from libperl): Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF Built under linux Compiled at Apr 15 2010 13:25:46 @INC: /usr/local/lib/perl5/site_perl/5.12.0/x86_64-linux /usr/local/lib/perl5/site_perl/5.12.0 /usr/local/lib/perl5/5.12.0/x86_64-linux /usr/local/lib/perl5/5.12.0 .

    Read the article

  • Endless problems with a very simple python subprocess.Popen task

    - by Thomas
    I'd like python to send around a half-million integers in the range 0-255 each to an executable written in C++. This executable will then respond with a few thousand integers. Each on one line. This seems like it should be very simple to do with subprocess but i've had endless troubles. Right now im testing with code: // main() u32 num; std::cin >> num; u8* data = new u8[num]; for (u32 i = 0; i < num; ++i) std::cin >> data[i]; // test output / spit it back out for (u32 i = 0; i < num; ++i) std::cout << data[i] << std::endl; return 0; Building an array of strings ("data"), each like "255\n", in python and then using: output = proc.communicate("".join(data))[0] ...doesn't work (says stdin is closed, maybe too much at one time). Neither has using proc.stdin and proc.stdout worked. This should be so very simple, but I'm getting constant exceptions, and/or no output data returned to me. My Popen is currently: proc = Popen('aux/test_cpp_program', stdin=PIPE, stdout=PIPE, bufsize=1) Advise me before I pull my hair out. ;)

    Read the article

  • [Perl] Testing for EAGAIN / EWOULDBLOCK on a recv

    - by Robert S. Barnes
    I'm testing a socket to see if it's still open: my $dummy = ''; my $ret = recv($sock, $dummy, 1, MSG_DONTWAIT | MSG_PEEK); if (!defined $ret || (length($dummy) == 0 && $! != EAGAIN && $! != EWOULDBLOCK )) { logerr("Broken pipe? ".__LINE__." $!"); } else { # socket still connected, reuse logerr(__LINE__.": $!"); return $sock; } I'm passing this code a socket I know for certain is open and it's always going through the first branch and logging "Broken pipe? 149 Resource temporarily unavailable". I don't understand how this is happening since "Resource temporarily unavailable" is supposed to correspond to EAGAIN as far as I know. I'm sure there must be something simple I'm missing. And yes, I know this is not a full proof way to test and I account for that.

    Read the article

  • EPIPE blocks server

    - by timn
    I have written a single-threaded asynchronous server in C running on Linux: The socket is non-blocking and as for polling, I am using epoll. Benchmarks show that the server performs fine and according to Valgrind, there are no memory leaks or other problems. The only problem is that when a write() command is interrupted (because the client closed the connection), the server will encounter a SIGPIPE. I am doing the interrupted artifically by running the benchmarking utility "siege" with the parameter -b. It does lots of requests in a row which all work perfectly. Now I press CTRL-C and restart the "siege". Sometimes I am lucky and the server does not manage to send the full response because the client's fd is invalid. As expected errno is set to EPIPE. I handle this situation, execute close() on the fd and then free the memory related to the connection. Now the problem is that the server blocks and does not answer properly anymore. Here is the strace output: accept(3, {sa_family=AF_INET, sin_port=htons(50611), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5 fcntl64(5, F_GETFD) = 0 fcntl64(5, F_SETFL, O_RDONLY|O_NONBLOCK) = 0 epoll_ctl(4, EPOLL_CTL_ADD, 5, {EPOLLIN|EPOLLERR|EPOLLHUP|EPOLLET, {u32=158310248, u64=158310248}}) = 0 epoll_wait(4, {{EPOLLIN, {u32=158310248, u64=158310248}}}, 128, -1) = 1 read(5, "GET /user/register HTTP/1.1\r\nHos"..., 4096) = 161 write(5, "HTTP/1.1 200 OK\r\nContent-Type: t"..., 106) = 106 <<<<< write(5, "00001000\r\n", 10) = -1 EPIPE (Broken pipe) <<<<< Why did the previous write() work fine but not this one? --- SIGPIPE (Broken pipe) @ 0 (0) --- As you can see, the client establishes a new connection which consequently is accepted. Then, it's added to the EPOLL queue. epoll_wait() signalises that the client sent data (EPOLLIN). The request is parsed and and a response is composed. Sending the headers works fine but when it comes to the body, write() results in an EPIPE. It is not a bug in "siege" because it blocks any incoming connections, no matter from which client.

    Read the article

  • How can I run a local Windows Application and have the output be piped into the Browser.

    - by Trey Sherrill
    I have Windows Application (.EXE file is written in C and built with MS-Visual Studio), that outputs ASCII text to stdout. I’m looking to enhance the ASCII text to include limited HTML with a few links. I’d like to invoke this application (.EXE File) and take the output of that application and pipe it into a Browser. This is not a one time thing, each new web page would be another run of the Local Application! The HTML/java-script application below has worked for me to execute the application, but the output has gone into a DOS Box windows and not to pipe it into the Browser. I’d like to update this HTML Application to enable the Browser to capture that text (that is enhanced with HTML) and display it with the browser. <body> <script> function go() { w = new ActiveXObject("WScript.Shell"); w.run('C:/DL/Browser/mk_html.exe'); return true; } </script> <form> Run My Application (Window with explorer only) <input type="button" value="Go" onClick="return go()"> </FORM> </body>

    Read the article

  • python thread prob after build

    - by Apache
    hi expert, i'm having task to scan wifi at specific interval and send it to the server, i've it in python and its works fine when i run manually, then build it to package and when run there is no progress at all, i already ask this question before at http://stackoverflow.com/questions/2735410/python-scritp-problem-once-build-and-package-it, then, i re-modify my code as below, then i found that thread is not functioning once i build, #!/usr/bin/env python import subprocess,threading,... configFile = open('/opt/Jemapoh_Wifi/config.txt', 'r') url = configFile.readline().strip() intervalTime = configFile.readline().strip() status = configFile.readline().strip() print "url "+url print "intervalTime "+intervalTime print "Status "+status.strip() def getMacAddress(): proc = subprocess.Popen('ifconfig -a wlan0 | grep HWaddr | sed \'/^.*HWaddr */!d; s///;q\'', shell=True, stdout=subprocess.PIPE, ) macAddress = proc.communicate()[0].strip() return macAddress def getTimestamp(): from time import strftime timeStamp = strftime("%Y-%m-%d %H:%M:%S") return timeStamp def scanWifi(): try: print "Scanning..." proc = subprocess.Popen('iwlist scan 2>/dev/null', shell=True, stdout=subprocess.PIPE, ) stdout_str = proc.communicate()[0] stdout_list=stdout_str.split('\n') essid=[] rssi=[] preQuality=[] for line in stdout_list: line=line.strip() match=re.search('ESSID:"(\S+)"',line) if match: essid.append(match.group(1)) match=re.search('Quality=(\S+)',line) if match: preQuality.append(match.group(1)) for qualityConversion in preQuality: qualityConversion = qualityConversion.split()[0].split('/') temp = str(int(round(float(qualityConversion[0]) / float(qualityConversion[1]) * 100))).rjust(2) rssi.append(temp) dataToPost = '{"userId":"' + getMacAddress() + '","timestamp":"' + getTimestamp() + '","wifi":[' for no in range(len(essid)): dataToPost += '{"ssid":"' + essid[no] + '","rssi":"' + rssi[no] + '"}' if no+1 == len(essid): pass else: dataToPost += ',' dataToPost += ']}' query_args = {"data":dataToPost} request = urllib2.Request(url) request.add_data(urllib.urlencode(query_args)) request.add_header('Content-Type', 'application/x-www-form-urlencoded') print "Waiting for server response..." print urllib2.urlopen(request).read() print "Data Sent @ " + getTimestamp() print "------------------------------------------------------" t = threading.Timer(int(intervalTime), scanWifi).start() except Exception, e: print e t = threading.Timer(int(intervalTime), scanWifi) t.start() once build, its not reaching the thread, do can anyone help, why the thread is not working after build thanks

    Read the article

  • JQuery Deferred - Adding to the Deferred contract

    - by MgSam
    I'm trying to add another asynchronous call to the contract of an existing Deferred before its state is set to success. Rather than try and explain this in English, see the following pseudo-code: $.when( $.ajax({ url: someUrl, data: data, async: true, success: function (data, textStatus, jqXhr) { console.log('Call 1 done.') jqXhr.pipe( $.ajax({ url: someUrl, data: data, async: true, success: function (data, textStatus, jqXhr) { console.log('Call 2 done.'); }, }) ); }, }), $.ajax({ url: someUrl, data: data, async: true, success: function (data, textStatus, jqXhr) { console.log('Call 3 done.'); }, }) ).then(function(){ console.log('All done!'); }); Basically, Call 2 is dependent on the results of Call 1. I want Call 1 and Call 3 to be executed in parallel. Once all 3 calls are complete, I want the All Done code to execute. My understanding is that Deferred.pipe() is supposed to chain another asynchronous call to the given deferred, but in practice, I always get Call 2 completing after All Done. Does anyone know how to get jQuery's Deferred to do what I want? Hopefully the solution doesn't involve ripping the code apart into chunks any further. Thanks for any help.

    Read the article

  • Starting a process in one HTTP call and getting results in another

    - by KillianDS
    Hi, I'm writing a very simple testing framework for my application, the design isn't perfect, but I don't have time to write something more complex. Essentially, I have a client and server-application, on my server I want a small python web server to start the server application with given test sequences on a GET or POST call. Also, the application prints some testdata to stderr which I'd like to catch and return in another HTTP call. At the moment I have this: from subprocess import Popen, PIPE from BaseHTTPServer import BaseHTTPRequestHandler, HTTPServer p = None class MyHandler(BaseHTTPRequestHandler): def do_GET(self): global p if self.path.endswith("start/"): p = Popen(["./bin/Release/simplex264","BBB-360","127.0.0.1"], stderr=PIPE) print 'started' return elif self.path.endswith("getResults/"): self.wfile.write(p.stderr.read()) return self.send_error(404,'File Not Found: %s' % self.path) def main(): try: server = HTTPServer(('localhost', 9876), MyHandler) print 'Started server...' server.serve_forever() except KeyboardInterrupt: print 'Shutting down...' server.socket.close() if __name__ == '__main__': main() Which 'works', except for one part, when I try to open http://localhost:9876/start/, it does not return before the process ended. However, the 'started' appears in my shell immediately (I added this because I thought the Popen call would only return after execution). I do not know the perfect inner workings of Popen and BaseHTTPRequestHandler however and do not really know where it goes wrong. Is there any way to make this work asynchronously?

    Read the article

  • Can I use POSIX signals in my Perl program to create event-driven programming?

    - by Shiftbit
    Is there any POSIX signals that I could utilize in my Perl program to create event-driven programming? Currently, I have multi-process program that is able to cross communicate but my parent thread is only able to listen to listen at one child at a time. foreach (@proc) { sysread(${$_}{'read'}, my $line, 100); #problem here chomp($line); print "Parent hears: $line\n"; } The problem is that the parent sits in a continual wait state until it receives it a signal from the first child before it can continue on. I am relying on 'pipe' for my intercommunication. My current solution is very similar to: http://stackoverflow.com/questions/2558098/how-can-i-use-pipe-to-facilitate-interprocess-communication-in-perl If possible I would like to rely on a $SIG{...} event or any non-CPAN solution. Update: As Jonathan Leffler mentioned, kill can be used to send a signal: kill USR1 = $$; # send myself a SIGUSR1 My solution will be to send a USR1 signal to my child process. This event tells the parent to listen to the particular child. child: kill USR1 => $parentPID if($customEvent); syswrite($parentPipe, $msg, $buffer); #select $parentPipe; print $parentPipe $msg; parent: $SIG{USR1} = { #get child pid? sysread($array[$pid]{'childPipe'}, $msg, $buffer); }; But how do I get my the source/child pid that signaled the parent? Have the child Identify itself in its message. What happens if two children signal USR1 at the same time?

    Read the article

  • Python to C# with openSSL requirement

    - by fonix232
    Hey there again! Today I ran into a problem when I was making a new theme creator for chrome. As you may know, Chrome uses a "new" file format, called CRX, to manage it's plugins and themes. It is a basic zip file, but a bit modified: "Cr24" + derkey + signature + zipFile And here comes the problem. There are only two CRX creators, written in Ruby or Python. I don't know neither language too much (had some basic experience in Python though, but mostly with PyS60), so I would like to ask you to help me convert this python app to a C# class. Also, here is the source of crxmake.py: #!/usr/bin/python # Cribbed from http://github.com/Constellation/crxmake/blob/master/lib/crxmake.rb # and http://src.chromium.org/viewvc/chrome/trunk/src/chrome/tools/extensions/chromium_extension.py?revision=14872&content-type=text/plain&pathrev=14872 # from: http://grack.com/blog/2009/11/09/packing-chrome-extensions-in-python/ import sys from array import * from subprocess import * import os import tempfile def main(argv): arg0,dir,key,output = argv # zip up the directory input = dir + ".zip" if not os.path.exists(input): os.system("cd %(dir)s; zip -r ../%(input)s . -x '.svn/*'" % locals()) else: print "'%s' already exists using it" % input # Sign the zip file with the private key in PEM format signature = Popen(["openssl", "sha1", "-sign", key, input], stdout=PIPE).stdout.read(); # Convert the PEM key to DER (and extract the public form) for inclusion in the CRX header derkey = Popen(["openssl", "rsa", "-pubout", "-inform", "PEM", "-outform", "DER", "-in", key], stdout=PIPE).stdout.read(); out=open(output, "wb"); out.write("Cr24") # Extension file magic number header = array("l"); header.append(2); # Version 2 header.append(len(derkey)); header.append(len(signature)); header.tofile(out); out.write(derkey) out.write(signature) out.write(open(input).read()) os.unlink(input) print "Done." if __name__ == '__main__': main(sys.argv) Please could you help me?

    Read the article

  • Full complete MySQL database replication? Ideas? What do people do?

    - by mauriciopastrana
    Currently I have two Linux servers running MySQL, one sitting on a rack right next to me under a 10 Mbit/s upload pipe (main server) and another some couple of miles away on a 3 Mbit/s upload pipe (mirror). I want to be able to replicate data on both servers continuously, but have run into several roadblocks. One of them being, under MySQL master/slave configurations, every now and then, some statements drop (!), meaning; some people logging on to the mirror URL don't see data that I know is on the main server and vice versa. Let's say this happens on a meaningful block of data once every month, so I can live with it and assume it's a "lost packet" issue (i.e., god knows, but we'll compensate). The other most important (and annoying) recurring issue is that, when for some reason we do a major upload or update (or reboot) on one end and have to sever the link, then LOAD DATA FROM MASTER doesn't work and I have to manually dump on one end and upload on the other, quite a task nowadays moving some .5 TB worth of data. Is there software for this? I know MySQL (the "corporation") offers this as a VERY expensive service (full database replication). I am just wondering what people out there do. The way it's structured, we run an automatic failover where if one server is not up, then the main URL just resolves to the other server.

    Read the article

  • Runing bcdedit from python in Windows 2008 SP2

    - by Lee-Man
    I do not know windows well, so that may explain my dilemma ... I am trying to run bcdedit in Windows 2008R2 from Python 2.6. My Python routine to run a command looks like this: def run_program(cmd_str): """Run the specified command, returning its output as an array of lines""" dprint("run_program(%s): entering" % cmd_str) cmd_args = cmd_str.split() subproc = subprocess.Popen(cmd_args, stdout=subprocess.PIPE, stderr=subprocess.PIPE, shell=True) (outf, errf) = (subproc.stdout, subproc.stderr) olines = outf.readlines() elines = errf.readlines() if Options.debug: if elines: dprint('Error output:') for line in elines: dprint(line.rstrip()) if olines: dprint('Normal output:') for line in olines: dprint(line.rstrip()) errf.close() outf.close() res = subproc.wait() dprint('wait result=', res) return (res, olines) I call this function thusly: (res, o) = run_program('bcdedit /set {current} MSI forcedisable') This command works when I type it from a cmd window, and it works when I put it in a batch file and run it from a command window (as Administrator, of course). But when I run it from Python (as Administrator), Python claims it can't find the command, returning: bcdedit is not recognized as an internal or external command, operable program or batch file Also, if I trying running my batch file from Python (which works from the command line), it also fails. I've also tried it with the full path to bcdedit, with the same results. What is it about calling bcdedit from Python that makes it not found? Note that I can call other EXE files from Python, so I have some level of confidence that my Python code is sane ... but who knows. Any help would be most appreciated.

    Read the article

  • Bad performance function in PHP. With large files memory blows up! How can I refactor?

    - by André
    Hi I have a function that strips out lines from files. I'm handling with large files(more than 100Mb). I have the PHP Memory with 256MB but the function that handles with the strip out of lines blows up with a 100MB CSV File. What the function must do is this: Originally I have the CSV like: Copyright (c) 2007 MaxMind LLC. All Rights Reserved. locId,country,region,city,postalCode,latitude,longitude,metroCode,areaCode 1,"O1","","","",0.0000,0.0000,, 2,"AP","","","",35.0000,105.0000,, 3,"EU","","","",47.0000,8.0000,, 4,"AD","","","",42.5000,1.5000,, 5,"AE","","","",24.0000,54.0000,, 6,"AF","","","",33.0000,65.0000,, 7,"AG","","","",17.0500,-61.8000,, 8,"AI","","","",18.2500,-63.1667,, 9,"AL","","","",41.0000,20.0000,, When I pass the CSV file to this function I got: locId,country,region,city,postalCode,latitude,longitude,metroCode,areaCode 1,"O1","","","",0.0000,0.0000,, 2,"AP","","","",35.0000,105.0000,, 3,"EU","","","",47.0000,8.0000,, 4,"AD","","","",42.5000,1.5000,, 5,"AE","","","",24.0000,54.0000,, 6,"AF","","","",33.0000,65.0000,, 7,"AG","","","",17.0500,-61.8000,, 8,"AI","","","",18.2500,-63.1667,, 9,"AL","","","",41.0000,20.0000,, It only strips out the first line, nothing more. The problem is the performance of this function with large files, it blows up the memory. The function is: public function deleteLine($line_no, $csvFileName) { // this function strips a specific line from a file // if a line is stripped, functions returns True else false // // e.g. // deleteLine(-1, xyz.csv); // strip last line // deleteLine(1, xyz.csv); // strip first line // Assigna o nome do ficheiro $filename = $csvFileName; $strip_return=FALSE; $data=file($filename); $pipe=fopen($filename,'w'); $size=count($data); if($line_no==-1) $skip=$size-1; else $skip=$line_no-1; for($line=0;$line<$size;$line++) if($line!=$skip) fputs($pipe,$data[$line]); else $strip_return=TRUE; return $strip_return; } It is possible to refactor this function to not blow up with the 256MB PHP Memory? Give me some clues. Best Regards,

    Read the article

  • How can i use a commandlinetool (ie. sox) via subprocess.Popen with mod_wsgi?

    - by marue
    I have a custom django filefield that makes use of sox, a commandline audiotool. This works pretty well as long as i use the django development server. But as soon as i switch to the production server, using apache2 and mod_wsgi, mod_wsgi catches every output to stdout. This makes it impossible to use the commandline tool to evaluate the file, for example use it to check if the uploaded file really is an audio file like this: filetype=subprocess.Popen([sox,'--i','-t','%s'%self.path], shell=False,\ stdout=subprocess.PIPE, stderr=subprocess.PIPE) (filetype,error)=filetype.communicate() if error: raise EnvironmentError((1,'AudioFile error while determining audioformat: %s'%error)) Is there a way to workaround for this? edit the error i get is "missing filename". I am using mod_wsgi 2.5, standard with ubuntu 8.04. edit2 What exactly happens, when i call subprocess.Popen from within django in mod_wsgi? Shouldn't subprocess stdin/stdout be independent from django stdin/stdout? In that case mod_wsgi should not affect programms called via subprocess... I'm really confused right now, because the file i am trying to access is a temporary file, created via a filenamevariable that i pass to the file creation and the subprocess command. That file is being written to /tmp, where the rights are 777, so it can't be a rights issue. And the error message is not "file does not exist", but "missing filename", which suggests i am not passing a filename as parameter to the commandlinetool.

    Read the article

  • Unable to get data from a WCF client

    - by Scott
    I am developing a DLL that will provide sychronized time stamps to multiple applications running on the same machine. The timestamps are altered in a thread that uses a high performance timer and a scalar to provide the appearance of moving faster than real-time. For obvious reasons I want only 1 instance of this time library, and I thought I could use WCF for the other processes to connect to this and poll for timestamps whenever they want. When I connect however I never get a valid time stamp, just an empty DateTime. I should point out that the library does work. The original implementation was a single DLL that each application incorporated and each one was synced using windows messages. I'm fairly sure it has something to do with how I'm setting up the WCF stuff, to which I am still pretty new. Here are the contract definitions: public interface ITimerCallbacks { [OperationContract(IsOneWay = true)] void TimerElapsed(String id); } [ServiceContract(SessionMode = SessionMode.Required, CallbackContract = typeof(ITimerCallbacks))] public interface ISimTime { [OperationContract] DateTime GetTime(); } Here is my class definition: [ServiceBehavior(InstanceContextMode = InstanceContextMode.Single)] public class SimTimeServer: ISimTime The host setup: // set up WCF interprocess comms host = new ServiceHost(typeof(SimTimeServer), new Uri[] { new Uri("net.pipe://localhost") }); host.AddServiceEndpoint(typeof(ISimTime), new NetNamedPipeBinding(), "SimTime"); host.Open(); and the implementation of the interface function server-side: public DateTime GetTime() { if (ThreadMutex.WaitOne(20)) { RetTime = CurrentTime; ThreadMutex.ReleaseMutex(); } return RetTime; } Lastly the client-side implementation: Callbacks myCallbacks = new Callbacks(); DuplexChannelFactory pipeFactory = new DuplexChannelFactory(myCallbacks, new NetNamedPipeBinding(), new EndpointAddress("net.pipe://localhost/SimTime")); ISimTime pipeProxy = pipeFactory.CreateChannel(); while (true) { string str = Console.ReadLine(); if (str.ToLower().Contains("get")) Console.WriteLine(pipeProxy.GetTime().ToString()); else if (str.ToLower().Contains("exit")) break; }

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >