Search Results

Search found 5873 results on 235 pages for 'raster graphics'.

Page 51/235 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• NVIDIA same chipset, but different implementations - what is the difference?

  - by Horst Walter

  I have planned to buy a graphics card. When searching for a particular chipset (e.g. GTX 460) I find cards of different vendors (i.e. Gigabyte, Palit, PNY, ...). I can figure out differences in frequency, memory, and equipment. When I read test reports, usually a particular NVIDIA card is compared with its ATI/AMD "counterpart" - have not really found a comparison of all vendors for a particular NVIDIA chipset. So in order to make a decision: a) Are the drivers all the same for all the cards of a particular chipset (and provided by NVIDIA or the vendor?) b) How to figure out which card actually to buy. OK, I choose chipset, and memory, and check the card has the required ports, but then ....

  Read the article

• Freezing with black screen after booting OS with AMD Catalyst driver

  - by Oleg

  I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

  Read the article

• cannot install new drivers for ATI Radeon HD mobility

  - by mugetsu

  I have an ATI mobility Radeon HD 3200 graphics card with a driver that I downloaded from my computer manufacturer's site. I wanted to upgrade the driver so I downloaded the respective driver from ATI and ran the installation. However, the installation only installs the download manager, the App SDK, C++ distributables and CCC, no display driver. When I try opening the CCC, I get an error that quits the CCC, something about the display driver not being recognized. What is wrong here? How do I go about fixing this? thanks

  Read the article

• ASUS EAH4670 vs. ASUS EAH4670 V2 -- Whats the difference?

  - by roosteronacid

  I've been offered to buy a used ASUS EAH4670/DI/1GD3 graphics card. I went price-scouting to see if the offer I was given was fair, and I found out that there's a similar card, labelled ASUS EAH4670/DI/1GD3 V2. Question is; What's the difference? What's with the V2? What does it mean? Is it just a BIOS upgrade that I can do myself? Updated driver-software which I can download myself? Or is the card actually a better version--faster, more reliable (physical changes to the print), etc.?

  Read the article

• LCD problems: brightness / contrast blown out, can't bring up menu

  - by davr

  Yesterday, when I turned on my LCD monitor, the colors were very very bright. It looks as if someone had gone into the monitor on-screen-display and turned up brightness & contrast all the way to the max. Colors were washed out, and it's almost painful to look at. So I tried to go into the menu and see if the settings were wrong somehow...and I found that I cannot bring up the menu. All the buttons on the front of the monitor now do nothing, except the power button. I was able to go into my graphics card settings, and turn the brightness way down to compensate, so it's at least usable for now, but it's not quite right, there is definitely some loss of color resolution or something from the two extreme settings canceling each other out. Any ideas what kind of failure in the LCD might cause this? According to the control panel, the model number is: KL2490DW-D It's a 24" 1920x1200 with the brand "synaps".

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

• Does it mean video card is broken?

  - by Sejanus

  Hello, I've just installed some sort of relatively old video card and now computer freezes while playing certain video games (Civilization 4, HOMM V). Some other video games with far better graphics works well (Dawn of War I). Note that "freezing" games runs nicely and smoothly for about 10-15 mins, no lag or any other indication that video card may be not good enough. And then PC suddenly freezes, nothing works but rebooting. The question is, is this a normal behavior of a video card which is simply "not good enough" for the games in question, or is there something broken? Card itself or motherboard or whatever? OS is Windows 7 if that matters, and I don't know exact videocard specs but that probably doesn't matter for this sort of question... thanks in advance!

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• Need advice on PC components for high-end games but in limited budget

  - by Md Atif

  I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

  Read the article

• 1080 HD video display - Windows 7

  - by blasteralfred

  I am running Windows 7 in my Dell Studio 1555 Laptop. I have ATI Mobility Radeon HD 4570 graphics card inside. When I try to watch a video, I can see only some disturbed texture. I can hear the audio and no prob with that. The I can see the video frames peeking sometimes but is pretty slower. I have DirectX (directx_feb2010_redist) and Win7 codecs installed. Here are some screenshots; The video details are; Name: video.mp4 Frame width: 1920 Frame height: 1080 Frame rate: 29 fps data Rate: 7958 kbps Total bitrate: 8052 kbps Just comment if you want more info.

  Read the article

• How can I get my Sapphire Radeon 7850 to output in "1080p"?

  - by Fr33dan

  I have a Radeon 7850 connected to a Vizio 3D compatible TV. The TV has a function to parse and display SBS encoded content. On my old graphics card (a Radeon 5770) I just had to select the 1080p option in the catalyst control center. In this mode my TV reported the output mode as "1080p", with the new card the TV reports "1920x1080". I cannot figure out what the difference in between the 2 signals but the "1920x1080" cannot be switched into 3D mode by the TV. Weirdly, before windows starts the (in the Bios and so forth) the computer outputs in "1080p" so I know the card is capable of it. As soon as the blue login screen comes up though it changes back to the "1920x1080". I've tried everthing I can think of. Updated my drivers from 13.3b3 to 13.4, then even tried the 13.5 beta (Which I'm still on this moment). Tried all the "optimized" HD settings in catalyst, even the 720p modes show the resolution from the TV and not the "720p" (which it used to do on the old card when I had to lower the resolution of games)

  Read the article

• how to force 1440x900 resolution on acer al1702w lcd monitor

  - by ashishsony

  i have acer al1702w lcd monitor in my office.. somehow i restarted the system using the reset button as the os stoped responding.. since then the 1440x900 resolution option in the display settings is not appearing.. the intel graphocs is 82945G... and as always the h/w guys at the office are of no help.. they start blurting out their theories that this the best resolution... even though i show them that the max resolution for the monitor is indeed 1440x900.. and its not that the 82945g cant handle it... as it was working before.. i installed the latest drivers for this graphics but still im not finding that option... how to force 1440x900 resolution... oh tes the os ix xp pro sp2 Thanks..

  Read the article

• HDMI and DVI connected monitors not in dual view on Windows 7 (Intel onboard Gigabyte)

  - by Nux

  I have a HDMI to DVI cable which is connected to one monitor (HDMI is on PC side) and DVI-DVI connected to other monitor. This seems to work up until the system is fully loaded (the startup logo animation is shown on two screens). When and after I log in only one monitor is active (HDMI-DVI). I'm also unable to detect the other monitor (DVI-DVI). Any ideas what might be wrong with the setup? Also when I uninstall the Intel Graphics driver both screens are on, but only duplication works. GA-Z68A-D3H-B3, Intel Z68 Chipset, with fresh VGA driver (15.26.1.64.2618).

  Read the article

• Visual Studio 2010 Graphic Artifacts

  - by jonathan

  This problem started happening to me once I installed SP1 onto my Windows 7 Ultimate install. When changing between tabs, or even just hovering my mouse over buttons, VS2010 starts artifacting. It's bad enough where I often times can't see any of the code I'm working on. Sometimes just the button the mouse is over will go black, and other times the entire code panel will turn a black and grey pattern. This problem only happens with Visual Studio 2010 (2008 works fine). The problem remained when I upgraded Visual Studio to SP1. I've also uninstalled and reinstalled Visual Studio and the graphics drivers several times now, and I'm about ready to reinstall Windows 7, but I figured I'd ask for suggestions first. Google, as well as searching through Stack Exchange, did not turn up anything useful.

  Read the article

• How do I hookup a dual video card Crossfire rig to a single monitor?

  - by Alexed

  I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

  Read the article

• asus 1215p cannot get the 1366 x 768 resolution

  - by Arthur

  Hi everyone, im a little bit stuck. I had a windows 7 starter installed on this netbook, it wasn't that great so I installed windows 7 ultimate. everything is OK apart from the screen resolution. it doesn't let me choose the optimal 1366x768 resolution and defaults to lower quality, in fact it doesn't even list it. I have tried drivers from Microsoft, Asus and Intel and still no joy. Any suggestions? It has the Intel 3150 Graphics Media Accelerator Much appreciated :)

  Read the article

• Explorer.exe - No such interface supported and other issues

  - by tom

  The problem started when I uninstalled my ATI graphics driver and i used a driver cleaner. After i restarted win7 and it got to POST the screen just went completely blank. So i Used system restore from the repair menu to get back on. I found out that if I ran chkdsk the display just goes black after restart on startup and i have to use system restore to get back on windows7 not sure why this is. When i right click desktop and choose 'Screen Resolution' it says No such interface supported. Also when I click items such as device manager in the windows explorer it does not do anything. I have tried re-registering the DLLS but that did not do anything.

  Read the article

• Mobile Intel 965 vs 4 Series chipset speed differences

  - by graham.reeds

  A client of ours is having a problem panning on a mapping application that we write on their panasonic toughbooks (CF-19's). One of their toughbooks the panning is fairly smooth while on the other it is really slow. Doesn't help that they have all the settings turned up, but I would of thought any reasonably new graphics card (even shared memory) would have more than adequate graphic speed. I am pretty sure that the graphic adapter is to blame, but I can't find anything out about either chipset (level of acceleration, non-problems, etc). All I get is the intel data sheets. The faster panning one is on the Mobile Intel 4 Series Express Chipset while the slower is on the Mobile Intel 965 Express Chipset. Is this expected? Does it sound like a driver problem? They both have the same amount of ram and same cpu.

  Read the article

• DisplayPort to DVI not working on Quadro FX 580

  - by kaosvid

  I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

  Read the article

• Screen rotation hot key (CTRL+ALT+UP) not responding, what's going on?

  - by Jamie

  The other day my son (11 months) discovered a new hot key combination on my laptop. As I'm sure many of you are aware (I wasn't until the other day), on machines with Intel Graphics, pressing CTRL+ALT+{any arrow key} rotates the screen. After I recovered from my shock, and did a little sideways Googling to figure out how to fix it, I decided this might actually be useful. I read a lot of online documentation, and it fits better on the screen when it's rotated. Since it's a laptop, I hold the machine like a book and read it. It worked great all afternoon yesterday. But today at work I tried to show a friend this new trick, using the same laptop, and found that the CTRL+ALT+UP no longer works. I can rotate it to any orientation but the normal one. I'm guessing something else is intercepting this hot key, but what could be doing this?

  Read the article

• Video has become blurred and smoothed out?!

  - by benwebdev

  Hi, Since yesterday video and graphics on my Windows 7 desktop seem to have become smoothed out and blurred slightly and I'm not sure why. The last thing I did on the machine was play Fallout New Vegas for the first time. An example can be seen in the picture here screenshot - note how smoothed out the character on the right seems, lots of definition looks lost. It's really annoying and happening regardless of what I watch. My system is below: Windows7 Ultimate 64 bit 6GB RAM Sapphire HD 5770 Vapor-X 1GB Gigabyte X58A-UD3R Motherboard Coolermaster Silent Pro M series 700W power supply All help greatly appreciated thanks

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• After turning my monitor off and on, it will display only a white screen

  - by Narf the Mouse

  About a month after installing a new graphics card, I started encountering a rather frustrating problem. Namely, if I turn my monitor off for any significant length of time, then turn it back on, it displays only a white screen. Previously, restarting could fix the problem. However, after leaving the computer off last night, the problem persists. An internet search turned up this site; however, the monitor cable is not loose. As for the insides of the monitor - Well, I could poke around, but I risk making it worse if it's not the monitor. Any such instructions should be clear, detailed and include pictures. Further updates as events warrant.

  Read the article

• 2x ATI FireMV 2250 not working

  - by Brett Rigby

  I've just bought 2x ATI FireMV 2250 cards from a reputable seller on ebay... one is a PCI-E x1 and the other is a PCI-E x16. Problem is, neither works in my Dell Vostro 220 PC... Both cards appear to not work. Is there something I'm missing? The seller used an anti-static bag for one of the cards, syaing that: "You Must connect this graphics board to the computer's power supply" but there's no socket for that, nor any indication. I have contacted the seller, but thought I'd raise it here, as it seems strange that two cards can be non-functioning.

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >