Search Results

Search found 6172 results on 247 pages for 'usb headset'.

Page 51/247 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• How do I get the Windows 7 installer onto a USB drive?

  - by Rod

  I'm having trouble installing Windows 7 onto my old laptop. The problem appears to be the laptop's DVD-ROM no longer seems to work. Sucks. So, I'm trying to figure out how to get a bootable USB with my Windows 7 DVD info onto it. I found this link here on superuser.com: http://superuser.com/questions/66948/place-a-bootable-iso-on-a-usb-drive That looks good, except for the detail about making the USB bootable. It said that the OS you're making it bootable on must be the same as the machine you're going to be installing it on. I can't do that. The machine I would make it bootable from is a 64-bit version of Windows 7. The target machine is 32-bit. So, how's this going to work?

  Read the article

• Can I format a USB key in GUID mode in windows 7 to make it Mac OSX boot friendly?

  - by digiguru

  I have a macbookpro that wont boot properly. I've tried resetting the PRAM (holding down option - alt - P - R), but it doesn't work, it gets halfway through the boot process and says "You need to restart your computer" in several languages. Recently I downloaded a USB Key compatible Linux OS. This USB Key works as a boot loader on Windows machines, but on OSX it can only find the Harddrive partitions when I go into the boot loader menu (holding down Option on startup). I am assuming it is because it is formatted as FAT32, and not GUID Table. I believe my CD drive is also bust, it hasn't worked in a long time. I don't have another Mac computer, so is there a way I can format the USB key as GUID Partition from a windows 7 machine?

  Read the article

• Is it possible to use two separate USB tuners with Windows Media Center?

  - by Lunatik

  I'm planning to replace my traditional PC-style media center (with twin tuners) with an Asrock Ion 3D (or similar) but this means forgoing my existing PCI-E dual tuner card for a USB solution. Since Freeview HD (using DVB-T2) is now available I'd like to equip my media center to take advantage. The trouble is there are currently no dual DVB-T2 USB tuners on the market (that I can find anyway). Would I be able to plug two separate USB tuners and have them correctly picked up and working within all apps, including Windows Media Center? Are there any caveats I might need to bear in mind when using two tuners in this way?

  Read the article

• Why does my USB stick not show up in Windows Vista?

  - by Kjensen

  Just reinstalled a Lenovo laptop with Vista. Two separate USB sticks, that work fine on another computer, will not show up on this Vista computer. USB ports work fine for other stuff. USB sticks worked before I reinstalled the computer. After looking around, I tried going into Disk management, to see if they appear there - they don't. Is there some sort of service, that might be disabled, not allowing removable drives to mount? Or what else can be wrong?

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

• Should I format USB sticks and SD cards to FAT, FAT32, exFAT or NTFS? (Windows files, live Linux distors)

  - by superuser

  Does it depend on the media size which one to chose or on some other parameters? In Windows 7 FAT16 is the default. In pendrivelinux.com's Universal USB Installer FAT32. Which one to chose? How about NTFS for Windows use? How about exFAT? It is tne Microsoft designed filesystem for removable media. Is there a difference in USB sticks and SD cards in this regard? Edit: seeing developments in the other thread, should I still use something like exFAT if I don't want Recycle bins created on every single machine I plug my USB thumb drive in?

  Read the article

• It's the ethernet 10/100 in LAN transfer faster than USB 1.0?

  - by dag729

  I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU. The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop. The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?

  Read the article

• How can I get the mount path of a USB device on OSX?

  - by xastor

  I have a backup script that backs up some data to a USB device. The problem I have is that OSX sometimes changes the expected mount path. For example if some file is locked under the expected mount path, OSX mounts it on another path. A USB device named 'BACKUP' can be mounted at /Volumes/BACKUP-1 instead of /Volumes/BACKUP. Is there a way to finding out the current mount path of a USB device in the OSX Terminal? Something like 'mount_path BACKUP' (command is fake) which would then return '/Volumes/BACKUP-1' or nothing if the device was not mounted?

  Read the article

• VM VirtualBox, Ubuntu 9.10: USB memory stick and SD card not detected...

  - by vikramtheone

  Hello Guys, I have installed Ubuntu9.10 on VM VirtualBox, on my HP laptop. My laptop has several USB ports and also a SD card port. Unfortunately, I'm unable to access both, my pen-drive on the USB port and my 8GB SD card inserted in the SD Card port. Can anyone suggest me what I should do for my Ubuntu to detect both of them? I have installed all latest updates on Ubuntu. I'm able to use my USB mouse. Thank you Vikram

  Read the article

• Why my USB mouse get suspended after 3 seconds of inactivity?

  - by Vi.

  Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

  Read the article

• How can I disable write protection in my USB flash drive?

  - by 97847658

  My USB flash drive is currently unusable because it somehow (quite suddenly!) became write protected. I have googled around and tried many solutions to this problem, but none of them have worked so far. Here are some of the solutions I've tried: The drive has no tangible switch or button. Formatting the drive won't work, even in command line, even "low level formatting", because the drive is (after all) write protected. Changing certain registry keys to 0 doesn't seem to work. Repair_Neo2.9.exe says "USB Flash Disk not found!" One factor that may make it more difficult to find a solution: I have no idea what the make or model is, because I received the USB flash drive from my university as a gift. So if anyone knows how to find the make and model, that alone might be helpful. Any ideas? Thanks.

  Read the article

• How do I restore a Windows 8 iso image to a USB disk in OS X?

  - by duci9y

  I am on OS X and have a Windows 8 Consumer Preview x64 image. My computer doesn’t have a CD drive (MacBook Air). I have a 4 GB USB drive. I want to restore that image to the USB drive. There are many tools to do that on Windows, but I can’t finger out how to do it in OS X. Please note that I can’t run a VM, as my Air is a limited use machine. What I’ve tried: Simply restore to USB. Convert the image to img and use dd. These don’t work. How do I go about doing this?

  Read the article

• Turn 2 USB type A ports (receptacles) into an extension cable with 2 type A receptacles using Linux?

  - by Tianyang Li

  I'm currently trying to connect 2 USB devices together, but both ends are type A plugs. Before I buy a physical extension cords with 2 type A receptacles, I'd like to know if I can connect these 2 devices together at all by passing data "transparently" through a Linux box with = 2 USB ports. I'm actually trying to connect a keyboard to an Android phone, and I want to first try if it can work by using a Linux box as a "virtual" USB extension cord. Has anybody done something like this before? Thanks!

  Read the article

• USB Barcode Scanner and WM_KEYDOWN

  - by Bryce Fischer

  I am trying to write a program that can will read a barcode scanner. In addition, I need it to read the input even when the application is not the window in focus (i.e., running in system tray, etc). I found this article, titled Distinguishing Barcode Scanners from the Keyboard in WinForms, that seems to solve the exact problem. It is working pretty good, it detects my device and handles the WM_INPUT message. However, it is checking to see if the RAWINPUT.keyboard.Message is WM_KEYDOWN (0x100). It never seems to receive this. The only line of code I've altered in the code provided in the article is adding a Console.Out.WriteLine to output the actual values of that message: Console.Out.WriteLine("message: {0}", raw.keyboard.Message.ToString("X")); if (raw.keyboard.Message == NativeMethods.WM_KEYDOWN) { .... Here is what it outputs: message: B message: 1000B message: 3 message: 10003 message: 8 message: 10008 message: 3 message: 10003 message: 5 message: 10005 message: 3 message: 10003 message: 8 message: 10008 message: 8 message: 10008 message: 4 message: 10004 message: 9 message: 10009 message: 9 message: 10009 message: 3 message: 10003 The value I'm expecting to receive when this completes correctly is: 257232709 Which I verified by scanning to notepad. I don't know if the Operation System is relevant here, but I figured I should mention that I'm running this in Windows 7 64 and Visual Studio 2010 and .NET Framework 3.5. Scanner is a USB Barcode Scanner, Symbol LS2208, setup as "HID KEYBOARD EMULATION"

  Read the article

• sql exception when transferring project from usb to c:\

  - by jello

  I'm working on a C# windows program with Visual Studio 2008. Usually, I work from school, directly on my usb drive. But when I copy the folder on my hard drive at home, an sql exception is unhandled whenever I try to write to the database. it is unhandled at the conn.Open(); line. here's the exception unhandled Database 'L:\system\project\the_project\the_project\bin\Debug\PatientMonitoringDatabase.mdf' already exists. Choose a different database name. Cannot attach the file 'C:\Documents and Settings\Administrator\My Documents\system\project\the_project\the_project\bin\Debug\PatientMonitoringDatabase.mdf' as database 'PatientMonitoringDatabase'. it's weird, because my connection string says |DataDirectory|, so it should work on any drive... here's my connection string: string connStr = "Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\PatientMonitoringDatabase.mdf; " + "Initial Catalog=PatientMonitoringDatabase; " + "Integrated Security=True"; Someone told me to: Connect to localhost with SQL Server Management Studio Express, and remove/detach the existing PatientMonitoringDatabase database. Whether it's a persistent database or only active within a running application, you can't have 2 databases with the same name at the same time attached to a SQL Server instance. So I did that, and now it gives me: Directory lookup for the file "C:\Documents and Settings\Administrator\My Documents\system\project\the_project\the_project\bin\Debug\PatientMonitoringDatabase.mdf" failed with the operating system error 5(Access is denied.). Cannot attach the file 'C:\Documents and Settings\Administrator\My Documents\system\project\the_project\the_project\bin\Debug\PatientMonitoringDatabase.mdf' as database 'PatientMonitoringDatabase' I checked the files' properties, and I have allow for everyone. Does anyone know what's going on here?

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Why does integrity check fail for the 12.04.1 Alternate ISO?

  - by mghg

  I have followed various recommendations from the Ubuntu Documentation to create a bootable Ubuntu USB flash drive using the 12.04.1 Alternate install ISO-file for 64-bit PC. But the integrity test of the USB stick has failed and I do not see why. These are the steps I have made: Download of the 12.04.1 Alternate install ISO-file for 64-bit PC (ubuntu-12.04.1-alternate-amd64.iso) from http://releases.ubuntu.com/12.04.1/, as well as the MD5, SHA-1 and SHA-256 hash files and related PGP signatures Verification of the data integrity of the ISO-file using the MD5, SHA-1 and SHA-256 hash files, after having verified the hash files using the related PGP signature files (see e.g. https://help.ubuntu.com/community/HowToSHA256SUM and https://help.ubuntu.com/community/VerifyIsoHowto) Creation of a bootable USB stick using Ubuntu's Startup Disk Creator program (see http://www.ubuntu.com/download/help/create-a-usb-stick-on-ubuntu) Boot of my computer using the newly made 12.04.1 Alternate install on USB stick Selection of the option "Check disc for defects" (see https://help.ubuntu.com/community/Installation/CDIntegrityCheck) Steps 1, 2, 3 and 4 went without any problem or error messages. However, step 5 ended with an error message entitled "Integrity test failed" and with the following content: The ./install/netboot/ubuntu-installer/amd64/pxelinux.cfg/default file failed the MD5 checksum verification. Your CD-ROM or this file may have been corrupted. I have experienced the same (might only be similar since I have no exact notes) error message in previous attempts using the 12.04 (i.e. not the maintenance release) Alternate install ISO-file. I have in these cases tried to install anyway and have so far not experienced any problems to my knowledge. Is failed integrity check described above a serious error? What is the solution? Or can it be ignored without further problems?

  Read the article

• Can't open a separate usbdrive when booting from a liveusb install 12.10

  - by Hulgerorsh

  My problem is using a separate flash drive when running from my live usb of ubuntu 12.10. The problem is that when I choose to Try Ubuntu from this usb drive it no longer lets me access my other flash drive. It automatically sets it to part of the live usb but it's a completely separate flash drive.Ubuntu loads fine and everything but when I go to access my other flash drive nothing happens. When I try to open it from the home folder it gives me Unable to mount 3.5 volume Adding read ACL for uid 999 to media/ubuntu failed: Operation not supported message. My live usb is on a 8gb flash drive and my other flash drive is 4g.

  Read the article

• Installing Ubuntu 12.04 on the Hp Mini 210-2090nr

  - by Dalton Bailey

  When i got this netbook last year i planned n putting ubuntu netbook remix on it but i never did and now i can no longer booot n to windows for some reason so i finally decided to do it but after makig a usb stick with ubuntu on it it will not get to the menu where there is the black and white ubuntu logo and the option to install try and so on. I know to usb is configured correctly it will boot on other computers but on the netbook it only flashes SYSLINUX 4.06EOD..... and then flashs blue before turning black with the whit undercore in the top right corner for a very long time. any suggestions ive been told to disable acpi but i cant find it in the bios. (btw im uing 12.04 though ive tried 11.04 and used unetbootin linux live installer and universal usb installer to make the usb)

  Read the article

• RESIZE casper-rw

  - by Oldrifle

  UsING Toporesize-0.7.1 FLash drive is Transcent I want to add all unused space to casper-rw. Disk=3.72GB 2.68 used 1.GB casper-rw=1.95GB caspe=681MG I boot UBUNTU 11.10 64bit and see that size of HOME is about half of casper-rw It is working from flash drive ok. But I was not able to boot 11.10 64bit using USB 3.0 HDD. UBUNTU 11.10 32 bit on usb 2.0 HDD works ok ( currently multiboot with openSUSE) FUDUNTU 2012 on usb 3.0 hdd VERY FAST. Fast USB 3.0 8GB unit is ready. partitioned. Second part is labeled as casper-rw. Will try to install using partitions as base and home.No swap since I have 8GB ram. ANY SUGGESTION? Thanks

  Read the article

• Dell N7110 i7 overheats and doesn't boot when anything is plugged into the USB3 port

  - by Kostyantyn

  When i plug in any devices (mouse, keyboard) into usb 3.0 system dell n7110 overheats and fan goes crazy with terrible noise. So i'm using 1 usb 2.0 slot now with a usb hub. It doesn't solve the problem completely but system stays at a low fan rate for a longer time. I've tried to lower CPU frequency, but in my case (DELL INSPIRON N7110 i7 on Linux 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux) CPU was pretty cool (51 C) and still the same horrible fan noise. Looks like there is no such problems with ubuntu 10.04 (but there're some other problems). Ubuntu even doesn't boot if anything is plugged into usb 3.0

  Read the article

• Pls help Installation has ruined laptop

  - by user287694

  Hi this was my time using Linux. So I installed Ubuntu from Windows 7 via USB. After booting into Ubuntu I proceeded to do a full install over windows. This seemed to be going fine but at the point where I was to sign up to Ubuntu one it froze. After awhile maybe 30 mins I realised nothing was going to happen, so I restarted. Now after the bios options bit passes all I get is a prompt flashing at the top left of a black screen. I have tried booting up via USB option but nothing happens, I have tried this 6 or 7 times with fresh usb each time and also with lubuntu. I'm not sure if I have correctly made a live usb obviously I believe I have been but being new I can't guarantee this. Can anyone help me get some functional out of my laptop. Thanks Ben

  Read the article

• Can't boot without Flash Drive plugged in

  - by vlad

  (Sorry for my bad English) I had Ubuntu 12.04 Beta installed on my computer. When 12.04 was finally released, I made a bootable USB Flash Drive using Startup Disk Creator. Then I decided to check if this drive works properly and to reinstall the system on my desktop. I must add, my desktop behaves a bit strange when it comes to bootable USB's, it recognizes them as HDD. In BIOS I changed priority of boot so USB Flash Drive (recognized as HDD) was first. Successfully booted, I installed Ubuntu. Everything worked fine, but... Now I cannot boot from my real HDD. Every time I want to boot, I put the USB Flash Drive into my computer, boot, safely remove it and everything works. What have I to do, to repair boot? Thank you for your time!

  Read the article

• Setting primary internet connection and network on notebook

  - by Francois

  I have installed Ubuntu on a notebook that I have configured to connect to the internet using an Iburst USB modem. This works 100% after a bit of configuring. I now have a desktop pc that I have installed ubuntu on, and would like to connect the two with a router. I bought a router with wifi, and would like to connect my notebook to the other computer using wifi, while still keeping the internet working with the usb modem. The problem is that as soon as the wifi connect, the internet connection dies. Is there a way to force ubuntu to get internet access through the usb modem, but use wifi to connect to the network? I am pretty new to ubuntu so any help would be appreciated. I also have a samsung galaxy tab that I would like to connect to the internet through usb modem via the wifi, so is there also a way to share that internet connection with the other computers on the network? Thanks in advance.....

  Read the article

• udev rule group ownership not working

  - by Tirithen

  I have added a udev rule for my Arduino, but the symlink gets the ownership "root root" instead of "root dialout". $ cat /etc/udev/rules.d/47-Arduino.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2341", ATTR{idProduct}=="0001", MODE="0666", SYMLINK+="arduino", GROUP="dialout" $ ls -la /dev/ar* lrwxrwxrwx 1 root root 15 sep 8 11:02 /dev/arduino -> bus/usb/003/007 $ ls -la /dev/bus/usb/003/007 crw-rw-r-- 1 root dialout 189, 262 sep 8 11:12 /dev/bus/usb/003/007 My user is a member of the group "dialout" but I still get permission denied error when I'm trying to communicate with the device. There are no problems when I'm using the "default" device "/etc/ttyACM3". $ ls -la /dev/ttyACM3 crw-rw---- 1 root dialout 166, 3 sep 8 11:12 /dev/ttyACM3 I have tried to restart both the udev service and reboot my computer. How can I fix this?

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >