Search Results

Search found 2808 results on 113 pages for 'volume mixer'.

Page 51/113 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• How to delete a file that contains a backslash in the name under Windows 7?

  - by espinchi

  I want to delete a file named workspaces\google-gson-1.7.1-release.zip Yep, it contains a backslash in the name. Here it is: G:\>dir Z_DRIVE Volume in drive G is samsung Volume Serial Number is 48B9-7E1D Directory of G:\Z_DRIVE 04/06/2012 08:09 PM <DIR> . 04/06/2012 08:09 PM <DIR> .. 05/01/2011 02:21 PM 528,016 workspaces\google-gson-1.7.1-release.zip 1 File(s) 528,016 bytes 2 Dir(s) 88,400,478,208 bytes free The first attempt is to just delete it from the Windows Explorer, but it says it can't find the file. Then, I tried from the command line: G:\>del Z_DRIVE\workspaces\google-gson-1.7.1-release.zip The system cannot find the file specified. And, after researching a bit in the internets, I also tried the following, with no luck: G:\>del \\?\G:\Z_DRIVE\workspaces\google-gson-1.7.1-release.zip The system cannot find the file specified. Other than booting from some Linux CD, is there a way to get rid of this file? Update: also tried the following combinations, but the error is the same: G:\>del "\\?\G:\Z_DRIVE\workspaces\google-gson-1.7.1-release.zip" G:\Z_DRIVE>del workspaces\google-gson-1.7.1-release.zip G:\Z_DRIVE>del "workspaces\google-gson-1.7.1-release.zip" G:\Z_DRIVE>del workspaces*google-gson-1.7.1-release.zip

  Read the article

• How do I find the Serial Number of a USB Drive?

  - by jamuraa

  I'm trying to re-enable USB Autoplay in a secure way, by installing a program on each of the computers that I use so that I can run my launcher (PStart in this case) whenever I plug in my specific USB drive. The tool that I'm using to enable this - AutoRunGuard - needs the serial number of the USB drive that I am using. I can't figure out where to find this in Windows. Ideally I would not need to install and run a separate program to do this (seemingly) simple task. Since this is a pretty easy question, bonus points if you also tell me how to discover it in Linux as well. What steps do I need to take to retrieve a USB Drive's serial number? UPDATE: Just incase people come here looking for the answer for AutoRunGuard, I discovered that they don't want the USB device serial number, but the volume serial number. The drive serial can be found by going into the command line, navigating to the drive, and executing dir. The volume serial number is found in the top two lines - use it without the dash.

  Read the article

• SQL Server 2005 Disk Configuration: Single RAID 1+0 or multiple RAID 1+0s?

  - by mfredrickson

  Assuming that the workload for the SQL Server is just a normal OLTP database, and that there are a total of 20 disks available, which configuration would make more sense? A single RAID 1+0, containing all 20 disks. This physical volume would contain both the data files and the transaction log files, but two logical drives would be created from this RAID: one for the data files and one for the log files. Or... Two RAID 1+0s, each containing 10 disks. One physical volume would contain the data files, and the other would contain the log files. The reason for this question is due to a disagreement between me (SQL Developer) and a co-worker (DBA). For every configuration that I've done, or seen others do, the data files and transaction log files were separated at the physical level, and were placed on separate RAIDs. However, my co-workers argument is that by placing all the disks into a single RAID 1+0, then any IO that is done by the server is potentially shared between all 20 disks, instead of just 10 disks in my suggested configuration. Conceptually, his argument makes sense to me. Also, I've found some information from Microsoft that seems to supports his position. http://technet.microsoft.com/en-us/library/cc966414.aspx In the section titled "3. RAID10 Configuration", showing a configuration in which all 20 disks are allocated to a single RAID 1+0, it states: In this scenario, the I/O parallelism can be used to its fullest by all partitions. Therefore, distribution of I/O workload is among 20 physical spindles instead of four at the partition level. But... every other configuration I've seen suggests physically separating the data and log files onto separate RAIDs. Everything I've found here on Server Fault suggests the same. I understand that a log files will be write heavy, and that data files will be a combination of reads and writes, but does this require that the files be placed onto separate RAIDs instead of a single RAID?

  Read the article

• Recovering a broken NTFS filesystem?

  - by OverTheRainbow

  A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

  Read the article

• Folder with files shows as empty

  - by ProfKaos

  Last night I create a new project in Visual Studio 2010, in the folder c:\development\hobby\devices. When I navigate to that folder in a new instance of Windows Explorer, I get the 'This folder is empty.' message in the files pane. If I then, from within Visual Studio, issue the "Open containing folder command", explorer opens to the folder c:\development\hobby\devices\LoopBack, where loopback is a project under the main folder. If I paste that path into another new instance of explorer, explorer correctly opens c:\development\hobby\devices. How is this possible? SOLVED: This is what comes of typing paths instead of selecting them. Some elementary detective work yielded the following interesting results: C:\>dir dev*. Volume in drive C is OS Volume Serial Number is E4B4-0563 Directory of C:\ 2010/11/28 09:20 PM <DIR> Development 2010/12/01 08:57 PM <DIR> Develpment 2010/11/02 06:31 PM <DIR> DevTools 0 File(s) 0 bytes 3 Dir(s) 63 965 368 320 bytes free Where my disappearing project was in the badly spelt one.

  Read the article

• Is there such a thing as a file hosted container which deduplicates data held within?

  - by Mallow

  Background I have backups of a website which stores all of it's data into a single file. This file is several gigs large and I have many different backups of this file. Most of the data within is mostly the same plus whatever was added or changed to it. I want to keep all the concurrent backups I've made through the years in case I find a horrible surprise of data corruption along the line. However storing a 10gig file every month gets expensive. Seeking Solution I've often thought about different ways of alleviating this problem. One thought that comes up very often combines the idea of a duplicating file system which doesn't require it's own partitioned volume on a hard drive. Something like what truecrypt does, what it calls, "file hosted containers" which when using the truecrypt program allows you to mount and dismount that volume as a regular hard drive. Question Is there a virtual hard drive mounter which uses file-based container which uses data deduplicaiton file system? (This question is a little awkward to put into words, if you have a better idea on how to ask this question please feel free to help out.)

  Read the article

• mdadm lvm and ext4 slowness - How can I speed it up?

  - by beatbreaker

  I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

  Read the article

• Android app crashes on emulator - logCat shows no errors

  - by David Miler

  I have just added the SherlockActionBar library to my android project. After some small changes (FragmentActivity - SherlockFragmentActivity, getActionBar() - getSupportActionBar(), imports) it all compiled nicely. After I run the app, however, the debugger stops, as though it had encountered an exception. However, there are no errors shown in the LogCat output. I just can't wrap my head around what's going on. Here is the logCat output after I terminate the app. 10-02 14:11:19.227: I/SystemUpdateService(174): UpdateTask at time 1349187079227 10-02 14:11:19.237: I/ActivityThread(328): Pub com.android.email.attachmentprovider: com.android.email.provider.AttachmentProvider 10-02 14:11:19.687: I/dalvikvm(81): Jit: resizing JitTable from 512 to 1024 10-02 14:11:19.809: D/MediaScannerService(150): start scanning volume internal: [/system/media] 10-02 14:11:20.047: V/AlarmClock(239): AlarmInitReceiver finished 10-02 14:11:20.087: I/ActivityManager(81): Start proc com.android.quicksearchbox for broadcast com.android.quicksearchbox/.SearchWidgetProvider: pid=346 uid=10012 gids={3003} 10-02 14:11:20.127: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = false, running = false 10-02 14:11:20.427: I/ActivityThread(346): Pub com.android.quicksearchbox.google: com.android.quicksearchbox.google.GoogleSuggestionProvider 10-02 14:11:20.497: I/ActivityThread(346): Pub com.android.quicksearchbox.shortcuts: com.android.quicksearchbox.ShortcutsProvider 10-02 14:11:20.657: I/ActivityManager(81): Start proc com.android.music for broadcast com.android.music/.MediaAppWidgetProvider: pid=358 uid=10028 gids={3003, 1015} 10-02 14:11:20.927: D/ExchangeService(320): !!! EAS ExchangeService, onCreate 10-02 14:11:20.967: D/dalvikvm(260): GC_CONCURRENT freed 213K, 6% free 6409K/6791K, paused 5ms+101ms 10-02 14:11:21.077: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:21.567: D/GTalkService(174): [ReonnectMgr] ### report Inet condition: status=false, networkType=0 10-02 14:11:21.587: D/ConnectivityService(81): reportNetworkCondition(0, 0) 10-02 14:11:21.597: D/ConnectivityService(81): Inet connectivity change, net=0, condition=0,mActiveDefaultNetwork=0 10-02 14:11:21.597: D/ConnectivityService(81): starting a change hold 10-02 14:11:21.697: D/GTalkService(174): [RawStanzaProvidersMgr] ##### searchProvidersFromIntent 10-02 14:11:21.697: D/GTalkService(174): [RawStanzaProvidersMgr] no intent receivers found 10-02 14:11:21.847: I/SystemUpdateService(174): cancelUpdate (empty URL) 10-02 14:11:21.847: E/TelephonyManager(174): Hidden constructor called more than once per process! 10-02 14:11:21.867: D/dalvikvm(174): GC_CONCURRENT freed 337K, 7% free 6561K/7047K, paused 5ms+4ms 10-02 14:11:21.917: D/GTalkService(174): [ReonnectMgr] ### report Inet condition: status=false, networkType=0 10-02 14:11:21.917: D/ConnectivityService(81): reportNetworkCondition(0, 0) 10-02 14:11:21.917: D/ConnectivityService(81): Inet connectivity change, net=0, condition=0,mActiveDefaultNetwork=0 10-02 14:11:21.917: D/ConnectivityService(81): currently in hold - not setting new end evt 10-02 14:11:21.990: E/TelephonyManager(174): Original: com.google.android.location, new: com.google.android.gsf 10-02 14:11:22.027: I/SystemUpdateService(174): removeAllDownloads (cancelUpdate) 10-02 14:11:22.127: D/dalvikvm(328): GC_CONCURRENT freed 205K, 6% free 6506K/6855K, paused 660ms+3ms 10-02 14:11:22.197: D/Eas Debug(320): Logging: 10-02 14:11:22.319: D/dalvikvm(81): GREF has increased to 401 10-02 14:11:22.947: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:23.130: D/Eas Debug(320): Logging: 10-02 14:11:23.307: I//system/bin/fsck_msdos(29): Attempting to allocate 2044 KB for FAT 10-02 14:11:23.560: I/ActivityManager(81): Starting: Intent { flg=0x10000000 cmp=com.google.android.gsf/.update.SystemUpdateInstallDialog } from pid 174 10-02 14:11:23.587: I/ActivityManager(81): Starting: Intent { flg=0x10000000 cmp=com.google.android.gsf/.update.SystemUpdateDownloadDialog } from pid 174 10-02 14:11:24.087: W/ActivityManager(81): Activity pause timeout for ActivityRecord{407c7320 com.android.launcher/com.android.launcher2.Launcher} 10-02 14:11:24.237: E/TelephonyManager(174): Hidden constructor called more than once per process! 10-02 14:11:24.237: E/TelephonyManager(174): Original: com.google.android.location, new: com.google.android.gsf 10-02 14:11:24.507: D/dalvikvm(174): GC_EXPLICIT freed 231K, 7% free 6596K/7047K, paused 4ms+6ms 10-02 14:11:24.607: D/ConnectivityService(81): Inet hold end, net=0, condition =0, published condition =0 10-02 14:11:24.607: D/ConnectivityService(81): no change in condition - aborting 10-02 14:11:24.707: D/dalvikvm(174): GC_EXPLICIT freed 17K, 7% free 6579K/7047K, paused 4ms+4ms 10-02 14:11:24.947: I//system/bin/fsck_msdos(29): ** Phase 2 - Check Cluster Chains 10-02 14:11:25.117: I//system/bin/fsck_msdos(29): ** Phase 3 - Checking Directories 10-02 14:11:25.128: I//system/bin/fsck_msdos(29): ** Phase 4 - Checking for Lost Files 10-02 14:11:25.167: I//system/bin/fsck_msdos(29): 12 files, 1044448 free (522224 clusters) 10-02 14:11:25.227: I/Vold(29): Filesystem check completed OK 10-02 14:11:25.227: I/Vold(29): Device /dev/block/vold/179:0, target /mnt/sdcard mounted @ /mnt/secure/staging 10-02 14:11:25.237: D/Vold(29): Volume sdcard state changing 3 (Checking) -> 4 (Mounted) 10-02 14:11:25.257: I/PackageManager(81): Updating external media status from unmounted to mounted 10-02 14:11:25.457: D/dalvikvm(303): GC_EXPLICIT freed 35K, 6% free 6242K/6595K, paused 3ms+312ms 10-02 14:11:25.987: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:26.157: D/MediaScanner(150): prescan time: 2905ms 10-02 14:11:26.167: D/MediaScanner(150): scan time: 148ms 10-02 14:11:26.167: D/MediaScanner(150): postscan time: 2ms 10-02 14:11:26.167: D/MediaScanner(150): total time: 3055ms 10-02 14:11:26.197: D/MediaScannerService(150): done scanning volume internal 10-02 14:11:26.237: D/MediaScannerService(150): start scanning volume external: [/mnt/sdcard] 10-02 14:11:26.497: D/dalvikvm(143): GC_EXPLICIT freed 234K, 8% free 7735K/8327K, paused 3ms+5ms 10-02 14:11:27.180: D/dalvikvm(143): GC_CONCURRENT freed 150K, 4% free 8004K/8327K, paused 7ms+3ms 10-02 14:11:27.397: D/dalvikvm(143): GC_FOR_ALLOC freed 96K, 6% free 8310K/8775K, paused 76ms 10-02 14:11:27.580: D/dalvikvm(143): GC_FOR_ALLOC freed 515K, 11% free 8135K/9095K, paused 79ms 10-02 14:11:27.829: D/dalvikvm(143): GC_CONCURRENT freed 3K, 5% free 8694K/9095K, paused 7ms+6ms 10-02 14:11:28.137: V/TLINE(143): new: android.text.TextLine@4065b280 10-02 14:11:28.527: D/dalvikvm(143): GC_CONCURRENT freed 729K, 10% free 8764K/9671K, paused 5ms+13ms 10-02 14:11:28.677: D/dalvikvm(143): GC_FOR_ALLOC freed 152K, 11% free 8683K/9671K, paused 99ms 10-02 14:11:28.717: I/dalvikvm-heap(143): Grow heap (frag case) to 11.434MB for 2975968-byte allocation 10-02 14:11:28.807: D/dalvikvm(143): GC_FOR_ALLOC freed 0K, 9% free 11589K/12615K, paused 84ms 10-02 14:11:29.159: D/dalvikvm(143): GC_CONCURRENT freed 197K, 7% free 12195K/12999K, paused 8ms+6ms 10-02 14:11:29.647: D/dalvikvm(143): GC_EXPLICIT freed 351K, 6% free 12790K/13511K, paused 8ms+17ms 10-02 14:11:29.717: I/SurfaceFlinger(32): Boot is finished (70768 ms) 10-02 14:11:29.877: I/ARMAssembler(32): generated scanline__00000177:03010104_00000002_00000000 [ 44 ipp] (66 ins) at [0x407c7290:0x407c7398] in 990662 ns 10-02 14:11:29.907: I/ARMAssembler(32): generated scanline__00000177:03515104_00000001_00000000 [ 73 ipp] (95 ins) at [0x407c73a0:0x407c751c] in 989381 ns 10-02 14:11:30.287: D/dalvikvm(174): GC_EXPLICIT freed 25K, 8% free 6554K/7047K, paused 4ms+32ms 10-02 14:11:30.380: D/dalvikvm(143): GC_EXPLICIT freed 349K, 6% free 13124K/13895K, paused 5ms+25ms 10-02 14:11:30.957: D/dalvikvm(143): GC_FOR_ALLOC freed 1069K, 10% free 13860K/15239K, paused 81ms 10-02 14:11:32.177: D/dalvikvm(150): GC_CONCURRENT freed 183K, 6% free 6438K/6791K, paused 5ms+4ms 10-02 14:11:32.187: W/ActivityManager(81): No content provider found for: 10-02 14:11:32.607: V/MediaScanner(150): pruneDeadThumbnailFiles... android.database.sqlite.SQLiteCursor@406724a8 10-02 14:11:32.617: V/MediaScanner(150): /pruneDeadThumbnailFiles... android.database.sqlite.SQLiteCursor@406724a8 10-02 14:11:32.640: W/ActivityManager(81): No content provider found for: 10-02 14:11:32.640: D/VoldCmdListener(29): asec list 10-02 14:11:32.647: I/PackageManager(81): No secure containers on sdcard 10-02 14:11:32.667: D/MediaScanner(150): prescan time: 107ms 10-02 14:11:32.667: D/MediaScanner(150): scan time: 89ms 10-02 14:11:32.667: D/MediaScanner(150): postscan time: 61ms 10-02 14:11:32.667: D/MediaScanner(150): total time: 257ms 10-02 14:11:32.697: W/PackageManager(81): Unknown permission android.permission.ADD_SYSTEM_SERVICE in package com.android.phone 10-02 14:11:32.707: W/PackageManager(81): Unknown permission com.android.smspush.WAPPUSH_MANAGER_BIND in package com.android.phone 10-02 14:11:32.737: W/PackageManager(81): Not granting permission android.permission.SEND_DOWNLOAD_COMPLETED_INTENTS to package com.android.browser (protectionLevel=2 flags=0x9be45) 10-02 14:11:32.737: W/PackageManager(81): Not granting permission android.permission.BIND_APPWIDGET to package com.android.widgetpreview (protectionLevel=3 flags=0x28be44) 10-02 14:11:32.767: W/PackageManager(81): Unknown permission android.permission.READ_OWNER_DATA in package com.android.exchange 10-02 14:11:32.778: W/PackageManager(81): Unknown permission android.permission.READ_OWNER_DATA in package com.android.email 10-02 14:11:32.788: W/PackageManager(81): Unknown permission com.android.providers.im.permission.READ_ONLY in package com.google.android.apps.maps 10-02 14:11:32.797: W/PackageManager(81): Not granting permission android.permission.DEVICE_POWER to package com.android.deskclock (protectionLevel=2 flags=0x8be45) 10-02 14:11:33.137: D/MediaScannerService(150): done scanning volume external 10-02 14:11:33.197: D/PackageParser(81): Scanning package: /data/app/vmdl257911298.tmp 10-02 14:11:33.837: I/InputReader(81): Device reconfigured: id=0, name='qwerty2', surface size is now 1024x800 10-02 14:11:34.097: D/dalvikvm(81): GC_CONCURRENT freed 12185K, 47% free 13966K/26311K, paused 8ms+23ms 10-02 14:11:36.798: I/TabletStatusBar(124): DISABLE_CLOCK: no 10-02 14:11:36.798: I/TabletStatusBar(124): DISABLE_NAVIGATION: no 10-02 14:11:37.348: I/ARMAssembler(32): generated scanline__00000177:03515104_00001001_00000000 [ 91 ipp] (114 ins) at [0x407c7520:0x407c76e8] in 919320 ns 10-02 14:11:37.598: I/TabletStatusBar(124): DISABLE_BACK: no 10-02 14:11:37.710: I/ActivityManager(81): Displayed com.android.launcher/com.android.launcher2.Launcher: +46s212ms 10-02 14:11:38.817: D/dalvikvm(143): GC_CONCURRENT freed 969K, 8% free 14867K/16007K, paused 4ms+10ms 10-02 14:11:39.437: I/dalvikvm(81): Jit: resizing JitTable from 1024 to 2048 10-02 14:11:40.267: D/dalvikvm(143): GC_FOR_ALLOC freed 2357K, 16% free 14395K/17031K, paused 80ms 10-02 14:11:40.717: D/dalvikvm(143): GC_EXPLICIT freed 742K, 16% free 14358K/17031K, paused 8ms+4ms 10-02 14:11:41.617: D/dalvikvm(81): GC_CONCURRENT freed 1955K, 48% free 13869K/26311K, paused 9ms+10ms 10-02 14:11:42.559: D/dalvikvm(81): GC_CONCURRENT freed 1830K, 48% free 13881K/26311K, paused 9ms+9ms 10-02 14:11:42.758: I/PackageManager(81): Removing non-system package:cz.trilimi.sfaui 10-02 14:11:42.758: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:42.967: D/PackageManager(81): Scanning package cz.trilimi.sfaui 10-02 14:11:42.967: I/PackageManager(81): Package cz.trilimi.sfaui codePath changed from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk; Retaining data and using new 10-02 14:11:42.967: I/PackageManager(81): Unpacking native libraries for /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:43.097: D/installd(35): DexInv: --- BEGIN '/data/app/cz.trilimi.sfaui-2.apk' --- 10-02 14:11:45.317: D/dalvikvm(391): DexOpt: load 434ms, verify+opt 1260ms 10-02 14:11:45.407: D/installd(35): DexInv: --- END '/data/app/cz.trilimi.sfaui-2.apk' (success) --- 10-02 14:11:45.407: W/PackageManager(81): Code path for pkg : cz.trilimi.sfaui changing from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.407: W/PackageManager(81): Resource path for pkg : cz.trilimi.sfaui changing from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.407: D/PackageManager(81): Activities: cz.trilimi.sfaui.ItemListActivity cz.trilimi.sfaui.ItemDetailActivity 10-02 14:11:45.427: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:45.657: I/installd(35): move /data/dalvik-cache/data@[email protected]@classes.dex -> /data/dalvik-cache/data@[email protected]@classes.dex 10-02 14:11:45.657: D/PackageManager(81): New package installed in /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.997: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:46.147: D/dalvikvm(143): GC_EXPLICIT freed 3K, 16% free 14356K/17031K, paused 10ms+9ms 10-02 14:11:46.237: D/PackageManager(81): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged 10-02 14:11:46.277: D/PackageManager(81): generateServicesMap(android.content.SyncAdapter): 5 services unchanged 10-02 14:11:46.337: D/PackageManager(81): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged 10-02 14:11:46.347: D/PackageManager(81): generateServicesMap(android.content.SyncAdapter): 5 services unchanged 10-02 14:11:46.437: D/dalvikvm(208): GC_EXPLICIT freed 258K, 7% free 6488K/6919K, paused 3ms+5ms 10-02 14:11:46.477: W/RecognitionManagerService(81): no available voice recognition services found 10-02 14:11:46.897: I/ActivityManager(81): Start proc com.svox.pico for broadcast com.svox.pico/.VoiceDataInstallerReceiver: pid=398 uid=10006 gids={} 10-02 14:11:47.087: I/ActivityThread(398): Pub com.svox.pico.providers.SettingsProvider: com.svox.pico.providers.SettingsProvider 10-02 14:11:47.138: D/GTalkService(174): [GTalkService.1] handlePackageInstalled: re-initialize providers 10-02 14:11:47.147: D/GTalkService(174): [RawStanzaProvidersMgr] ##### searchProvidersFromIntent 10-02 14:11:47.147: D/GTalkService(174): [RawStanzaProvidersMgr] no intent receivers found 10-02 14:11:47.718: I/AccountTypeManager(208): Loaded meta-data for 1 account types, 0 accounts in 186ms 10-02 14:11:48.377: D/dalvikvm(143): GC_CONCURRENT freed 1865K, 15% free 14513K/17031K, paused 7ms+4ms 10-02 14:11:48.917: D/dalvikvm(208): GC_CONCURRENT freed 219K, 6% free 6788K/7175K, paused 7ms+73ms 10-02 14:11:49.207: D/dalvikvm(143): GC_FOR_ALLOC freed 4558K, 31% free 11866K/17031K, paused 89ms 10-02 14:11:49.587: D/dalvikvm(143): GC_CONCURRENT freed 713K, 24% free 13010K/17031K, paused 5ms+4ms 10-02 14:11:49.967: D/dalvikvm(143): GC_CONCURRENT freed 1046K, 19% free 13922K/17031K, paused 5ms+4ms 10-02 14:11:50.437: D/dalvikvm(81): GC_EXPLICIT freed 898K, 47% free 13955K/26311K, paused 6ms+39ms 10-02 14:11:50.467: I/installd(35): unlink /data/dalvik-cache/data@[email protected]@classes.dex 10-02 14:11:50.477: D/AndroidRuntime(227): Shutting down VM 10-02 14:11:50.507: D/dalvikvm(227): GC_CONCURRENT freed 97K, 84% free 331K/2048K, paused 1ms+2ms 10-02 14:11:50.507: I/AndroidRuntime(227): NOTE: attach of thread 'Binder Thread #3' failed 10-02 14:11:50.517: D/jdwp(227): adbd disconnected 10-02 14:11:51.177: D/AndroidRuntime(410): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<< 10-02 14:11:51.177: D/AndroidRuntime(410): CheckJNI is ON 10-02 14:11:51.897: D/AndroidRuntime(410): Calling main entry com.android.commands.am.Am 10-02 14:11:51.937: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:51.937: I/ActivityManager(81): Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=cz.trilimi.sfaui/.ItemListActivity } from pid 410 10-02 14:11:51.968: W/WindowManager(81): Failure taking screenshot for (230x179) to layer 21005 10-02 14:11:51.997: I/ActivityManager(81): Start proc cz.trilimi.sfaui for activity cz.trilimi.sfaui/.ItemListActivity: pid=418 uid=10036 gids={} 10-02 14:11:52.007: D/AndroidRuntime(410): Shutting down VM 10-02 14:11:52.057: I/AndroidRuntime(410): NOTE: attach of thread 'Binder Thread #3' failed 10-02 14:11:52.097: D/dalvikvm(410): GC_CONCURRENT freed 98K, 83% free 360K/2048K, paused 1ms+0ms 10-02 14:11:52.097: D/jdwp(410): adbd disconnected 10-02 14:11:53.147: W/ActivityThread(418): Application cz.trilimi.sfaui is waiting for the debugger on port 8100... 10-02 14:11:53.207: I/System.out(418): Sending WAIT chunk 10-02 14:11:53.217: I/dalvikvm(418): Debugger is active 10-02 14:11:53.447: I/System.out(418): Debugger has connected 10-02 14:11:53.457: I/System.out(418): waiting for debugger to settle... 10-02 14:11:53.637: I/ARMAssembler(32): generated scanline__00000177:03515104_00001002_00000000 [ 87 ipp] (110 ins) at [0x407c76f0:0x407c78a8] in 598498 ns 10-02 14:11:53.660: I/System.out(418): waiting for debugger to settle... 10-02 14:11:53.857: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.057: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.257: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.317: V/TLINE(81): new: android.text.TextLine@4155dde8 10-02 14:11:54.467: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.667: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.870: I/System.out(418): waiting for debugger to settle... 10-02 14:11:55.027: D/dalvikvm(143): GC_EXPLICIT freed 900K, 16% free 14420K/17031K, paused 7ms+4ms 10-02 14:11:55.067: I/System.out(418): waiting for debugger to settle... 10-02 14:11:55.292: I/System.out(418): debugger has settled (1315) 10-02 14:12:02.008: W/ActivityManager(81): Launch timeout has expired, giving up wake lock! 10-02 14:12:02.971: W/ActivityManager(81): Activity idle timeout for ActivityRecord{4078c6b0 cz.trilimi.sfaui/.ItemListActivity} 10-02 14:12:08.359: D/ExchangeService(320): Received deviceId from Email app: androidc259148960 10-02 14:12:08.507: D/ExchangeService(320): Reconciling accounts... 10-02 14:16:11.437: D/SntpClient(81): request time failed: java.net.SocketException: Address family not supported by protocol 10-02 14:17:21.573: W/jdwp(418): Debugger is telling the VM to exit with code=1 10-02 14:17:21.573: I/dalvikvm(418): GC lifetime allocation: 8642 bytes 10-02 14:17:21.637: D/Zygote(33): Process 418 exited cleanly (1) 10-02 14:17:21.651: I/ActivityManager(81): Process cz.trilimi.sfaui (pid 418) has died. 10-02 14:17:21.847: D/dalvikvm(143): GC_EXPLICIT freed <1K, 16% free 14420K/17031K, paused 7ms+7ms 10-02 14:17:21.917: W/InputManagerService(81): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@40bfbf28

  Read the article

• Can't figure out where race condition is occuring

  - by Nik

  I'm using Valgrind --tool=drd to check my application that uses Boost::thread. Basically, the application populates a set of "Book" values with "Kehai" values based on inputs through a socket connection. On a seperate thread, a user can connect and get the books send to them. Its fairly simple, so i figured using a boost::mutex::scoped_lock on the location that serializes the book and the location that clears out the book data should be suffice to prevent any race conditions. Here is the code: void Book::clear() { boost::mutex::scoped_lock lock(dataMutex); for(int i =NUM_KEHAI-1; i >= 0; --i) { bid[i].clear(); ask[i].clear(); } } int Book::copyChangedKehaiToString(char* dst) const { boost::mutex::scoped_lock lock(dataMutex); sprintf(dst, "%-4s%-13s",market.c_str(),meigara.c_str()); int loc = 17; for(int i = 0; i < Book::NUM_KEHAI; ++i) { if(ask[i].changed > 0) { sprintf(dst+loc,"A%i%-21s%-21s%-21s%-8s%-4s",i,ask[i].price.c_str(),ask[i].volume.c_str(),ask[i].number.c_str(),ask[i].postTime.c_str(),ask[i].status.c_str()); loc += 77; } } for(int i = 0; i < Book::NUM_KEHAI; ++i) { if(bid[i].changed > 0) { sprintf(dst+loc,"B%i%-21s%-21s%-21s%-8s%-4s",i,bid[i].price.c_str(),bid[i].volume.c_str(),bid[i].number.c_str(),bid[i].postTime.c_str(),bid[i].status.c_str()); loc += 77; } } return loc; } The clear() function and the copyChangedKehaiToString() function are called in the datagetting thread and data sending thread,respectively. Also, as a note, the class Book: struct Book { private: Book(const Book&); Book& operator=(const Book&); public: static const int NUM_KEHAI=10; struct Kehai; friend struct Book::Kehai; struct Kehai { private: Kehai& operator=(const Kehai&); public: std::string price; std::string volume; std::string number; std::string postTime; std::string status; int changed; Kehai(); void copyFrom(const Kehai& other); Kehai(const Kehai& other); inline void clear() { price.assign(""); volume.assign(""); number.assign(""); postTime.assign(""); status.assign(""); changed = -1; } }; std::vector<Kehai> bid; std::vector<Kehai> ask; tm recTime; mutable boost::mutex dataMutex; Book(); void clear(); int copyChangedKehaiToString(char * dst) const; }; When using valgrind --tool=drd, i get race condition errors such as the one below: ==26330== Conflicting store by thread 1 at 0x0658fbb0 size 4 ==26330== at 0x653AE68: std::string::_M_mutate(unsigned int, unsigned int, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653AFC9: std::string::_M_replace_safe(unsigned int, unsigned int, char const*, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653B064: std::string::assign(char const*, unsigned int) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x653B134: std::string::assign(char const*) (in /usr/lib/libstdc++.so.6.0.8) ==26330== by 0x8055D64: Book::Kehai::clear() (Book.h:50) ==26330== by 0x8094A29: Book::clear() (Book.cpp:78) ==26330== by 0x808537E: RealKernel::start() (RealKernel.cpp:86) ==26330== by 0x804D15A: main (main.cpp:164) ==26330== Allocation context: BSS section of /usr/lib/libstdc++.so.6.0.8 ==26330== Other segment start (thread 2) ==26330== at 0x400BB59: pthread_mutex_unlock (drd_pthread_intercepts.c:633) ==26330== by 0xC59565: pthread_mutex_unlock (in /lib/libc-2.5.so) ==26330== by 0x805477C: boost::mutex::unlock() (mutex.hpp:56) ==26330== by 0x80547C9: boost::unique_lock<boost::mutex>::~unique_lock() (locks.hpp:340) ==26330== by 0x80949BA: Book::copyChangedKehaiToString(char*) const (Book.cpp:134) ==26330== by 0x80937EE: BookSerializer::serializeBook(Book const&, std::string const&) (BookSerializer.cpp:41) ==26330== by 0x8092D05: BookSnapshotManager::getSnaphotDataList() (BookSnapshotManager.cpp:72) ==26330== by 0x8088179: SnapshotServer::getDataList() (SnapshotServer.cpp:246) ==26330== by 0x808870F: SnapshotServer::run() (SnapshotServer.cpp:183) ==26330== by 0x808BAF5: boost::_mfi::mf0<void, RealThread>::operator()(RealThread*) const (mem_fn_template.hpp:49) ==26330== by 0x808BB4D: void boost::_bi::list1<boost::_bi::value<RealThread*> >::operator()<boost::_mfi::mf0<void, RealThread>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, RealThread>&, boost::_bi::list0&, int) (bind.hpp:253) ==26330== by 0x808BB90: boost::_bi::bind_t<void, boost::_mfi::mf0<void, RealThread>, boost::_bi::list1<boost::_bi::value<RealThread*> > >::operator()() (bind_template.hpp:20) ==26330== Other segment end (thread 2) ==26330== at 0x400B62A: pthread_mutex_lock (drd_pthread_intercepts.c:580) ==26330== by 0xC59535: pthread_mutex_lock (in /lib/libc-2.5.so) ==26330== by 0x80546B8: boost::mutex::lock() (mutex.hpp:51) ==26330== by 0x805473B: boost::unique_lock<boost::mutex>::lock() (locks.hpp:349) ==26330== by 0x8054769: boost::unique_lock<boost::mutex>::unique_lock(boost::mutex&) (locks.hpp:227) ==26330== by 0x8094711: Book::copyChangedKehaiToString(char*) const (Book.cpp:113) ==26330== by 0x80937EE: BookSerializer::serializeBook(Book const&, std::string const&) (BookSerializer.cpp:41) ==26330== by 0x808870F: SnapshotServer::run() (SnapshotServer.cpp:183) ==26330== by 0x808BAF5: boost::_mfi::mf0<void, RealThread>::operator()(RealThread*) const (mem_fn_template.hpp:49) ==26330== by 0x808BB4D: void boost::_bi::list1<boost::_bi::value<RealThread*> >::operator()<boost::_mfi::mf0<void, RealThread>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, RealThread>&, boost::_bi::list0&, int) (bind.hpp:253) For the life of me, i can't figure out where the race condition is. As far as I can tell, clearing the kehai is done only after having taken the mutex, and the same holds true with copying it to a string. Does anyone have any ideas what could be causing this, or where I should look? Thank you kindly.

  Read the article

• Force Windows to output only mono sound

  - by sheepsimulator

  So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

  Read the article

• Windows Vista/7: Managing multiple audio playback devices

  - by BrianLy

  I've got speakers (audio in) and headphones (USB headset with it's own soundcard) connected to my desktop computer. Under Windows 7, I can right-click the Audio Mixer and select Playback Devices and toggle between my these devices. Is there an easier way, perhaps a keyboard shortcut, that would make it easier to toggle? I'm working in an shared space were sometimes I want headphones to avoid annoying other people, but at other times speakers are OK. I want to be able to toggle quickly. In an ideal world, the solution to my question would work in Vista too.

  Read the article

• All Xen domU LVM volumes corrupt after reboot

  - by zcs

  I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

  Read the article

• Why does Process Explorer cause highly targeted failure of some applications / basic UI functions in a high-power EC2 Windows instance?

  - by Dan Nissenbaum

  Update: I have determined that Process Explorer itself - the program I am using to debug a performance issue - seems to be the cause of the issue. See note, with updated question, at end. I am running a high-power (cc2.8xlarge) Amazon AWS EC2 Windows instance off of a boot EBS volume, provisioned at 2500 PIOPS, which was created from a snapshot of a previous boot volume. My purpose with the instance is to use it as a development workstation with many developer tools installed, such as Visual Studio, a local XAMPP stack, etc. I have upwards of 40 programs installed on the machine. The usability of the instance as a development machine often works quite well. The RDP lag is adequately small. I have used it for hours on end without problems for some of my most intense development tasks. As a result, I have just purchased a reserved instance, and I opted to rebuild my development machine starting from scratch with a Windows Server 2012 AMI. After having installed all of my desired/required applications for development over this past week, again the machine seems to often work well and I have worked for up to an hour at a time without problems doing heavy development work. However, I continue to run into catastrophic OS usability issues that may prevent me from being able to rely on this machine as a development machine. I would like to track down the source of the problem, if there is an easily identifiable source. (Update: I have tracked down the source to be Process Explorer, the very program I was using to debug the problem. See update at end.) The issues are as follows. (These are some primary examples) Some applications, after a period of adequate responsiveness, suddenly begin to respond very, very slowly to basic user interface actions such as clicking on menus and pressing Ctrl-Tab to switch between open documents. Two examples are UltraEdit and PhpEd. It typically takes ~2 seconds for a menu to appear, and ~4 seconds to switch between open documents. Additionally, insertion point motion in the editor is lagged by upwards of ~2 seconds. Process Explorer, which I am using to help debug the problem, seems to run acceptably for a couple of minutes, but on multiple occasions Process Explorer itself hangs completely. It hangs at the same time as the problems noted above. When it hangs, it is 100% unresponsive. Clicking on its taskbar icon neither causes it to come to the top or go behind, and its viewable area is filled with nothing but a region partially containing pure white and partially containing incomplete windows widgets that are unreadable, and that never change. Waiting 10 minutes does not clear the problem. Attempting to force-quit Process Explorer by right-clicking on its taskbar icon and choosing "Close Window" takes about 5 full minutes to exit (Process Explorer itself can't be used to exit Process Explorer, and it is registered as a Task Manager substitute). Other programs work just fine during this time. For example, Chrome tabs flip very quickly back and forth, menus pop open instantly, web pages load quickly, and typing in forms/web applications inside the browser works promptly. Another example of an application that works crisply is Filemaker - its menus open instantly, and switching views in this application occurs promptly. Other applications also work without issue. Also, switching between applications occurs promptly as well. It is only a handful of applications that exhibit the problem, with some primary examples given above. At first I thought that EBS IOPS might be a problem. Therefore, I ran Performance Monitor, and watched the "Disk Transfers/sec" monitor in real time. At no point did this measure come anywhere close to hitting the 2500 PIOPS provisioned for the EBS volume. The RAM was also well under the limit (~10 GB used out of 60 GB). I did notice that one CPU core (out of 32 logical cores) was fully thrashing at 100% (i.e., ~3.1%) during the problematic periods. This seems to indicate that a single CPU core is handling the menus / flipping between open documents (for some applications only) / managing the Process Explorer user interface, and that this single core was hosed for some reason during the problematic periods. Also note that I have a desktop workstation (Windows 7) that I also use as a development machine, via a remote connection, with a nearly identical set of programs installed, and this desktop workstation does not exhibit any of the problems I've discussed above. I have been using it heavily for well over a year now. Any suggestions regarding either the source of the problem, or steps I might take to investigate the source of the problem, would be appreciated. Thanks. Note: After extensive testing & investigation, I have noticed that when I quit Process Explorer, the problem vanishes and the system performance returns to normal, and then reappears quickly when I run Process Explorer again (note: again, the performance problems only appear for a subset of applications - other applications work perfectly fine during the same period). My question is therefore (thankfully) more specific: Why does Process Explorer cause highly targeted failure of some applications (including itself) and basic UI functions, in a high-power EC2 Windows instance?

  Read the article

• My Logitech G35 headphones aren't very loud on Linux (fedora 14) why?

  - by DarkMantis

  I have recently purchased a set of G35 headphones. They seem to be very loud when I use them on Windows, but when I try and use them on Fedora 14, they are very quiet and I can't seem to make them louder. I have obviously checked the sound settings in Gnome, and they are all up full. I have got ALSA-mixer installed but seems to make no difference. There doesn't seem to be any specific drivers for these headphones for Linux. Anyone know how to make them go a bit louder?

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

  - by d0nd

  Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

  Read the article

• No sounds played in google chrome tabs

  - by shtolik

  I have somehow muted all the tabs in my google chrome. Youtube and other flash players are playing video, but there is no sound. In Window 7 Volume mixer I can see Google chrome icon and it has muted icon there. But clicking that icon unmute sounds just for a second and then it's muted back on. Seems that chrome itself or some of it extensions are turning mute... Update: How do I mute certain tabs in Chrome? question seems related, but I don't have MuteTab extension installed in Chrome.

  Read the article

• Strange Intermittent Background Sound in Windows 7

  - by NoCarrier

  Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

  Read the article

• Force Windows to output only mono sound

  - by J. Polfer

  So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

  Read the article

• Strange Intermittent Background Sound in Windows 7

  - by NoCarrier

  Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

  Read the article

• No audio driver for ECS 7050-M v1.0a for Windows 7?

  - by NudeRaider

  I have an Elitegroup 7050-M v1.0a motherboard and I've used the Realtek HD audio driver it came with for years under Windows XP. There was a nice mixer panel, an equalizer and sound profiles that added effects. All of these menus are gone now that I've moved on to Windows 7 64 Bit. All I have is the basic settings under system control - sound, but they are not nearly as detailed. To clarify: Sound works, but the advanced settings I got when using older OS's are gone. Older drivers don't seem to work under Win7 and I can't find one for Win7. So how can I fully utilize the capabilities of my HD sound chip under Win7?

  Read the article

• Turn Photos and Home Videos into Movies with Windows Live Movie Maker

  - by DigitalGeekery

  Are you looking for an easy way to take your digital photos and videos and turn them into a movie or slideshow? Today we’ll take a detailed look at how to do use Windows Live Movie Maker. Installation Windows Live Movie Maker comes bundled as part of the Windows Live Essentials suite (link below). However, you don’t have to install any of the programs you may not want. Take notice of the You’re almost done screen. Before clicking Continue, be sure to uncheck the boxes to set your search provider and homepage. Adding Pictures and Videos Open Windows Live Movie Maker. You can add videos or photos by simply dragging and dropping them onto the storyboard area. You can also click on the storyboard area or on the Add videos and photos button on the Home tab to browse for videos and photos. Windows Live Movie Maker supports most video, image, and audio file types. Select your files and add click Open to add them to Windows Live Movie Maker. By default WLMM doesn’t allow you to add files from network locations…so check out our article on how to add network support to Windows Live MovieMaker if the files you want to add are on a network drive. Layout All of your added clips will appear in the storyboard area on the right, while the currently selected clip will appear in the preview window on the left. You can adjust the size of the two areas by clicking and dragging the dividing line in the middle.    Make the clips on the storyboard bigger or smaller by clicking on the thumbnail size icon. The slider at the lower right adjusts the zoom time scale.   Previewing your Movie At any time, you can playback your movie and preview how it will look in the Preview window by clicking the space bar, or by pushing the play button under the preview window. You can also manually move the preview bar slider across the storyboard to view the clips as the video progresses. Adjusting Clips on the Storyboard You can click and drag clips on the storyboard to change the order in which the photos and videos appear.   Adding Music Nothing brings a movie to life quite like music. Selecting Add music will add your music to the beginning of the movie. Select Add music at the current point to include it in the movie to the current location of your preview bar slider, then browse for your music clip. WLMM supports many common audio files such as WAV, MP3, M4A, WMA, AIFF, and ASF. The music clip will appear above the video / photos clips on the storyboard.   You can change the location of music clips by clicking and dragging them to a different location on the storyboard. Add Titles, Captions, and Credits To add a Title screen to your movie, click the Title button on the Home tab. Type your title directly into the text box on the preview screen. The title will be placed at the location of the preview slider on the storyboard. However, you can change the location by clicking and dragging title to other areas of the storyboard. On the Format tab, there are a handful of text settings. You can change the font, color, size, alignment,  and transparency. The Adjust group allows you to change the background color, edit the text, and set the length of time the Title will appear in the movie.   The Effects group on the Format tab allows you to select an effect for your title screen. By hovering your cursor over each option, you will get a live preview of how each effect will appear in the preview window. Click to apply any of the effects. For captions, select where you want your caption to appear with the preview slider on the storyboard, then click the captions button on the Home tab. Just like the title, you type your caption directly into the text box on the preview screen, and you can make any adjustments by using the Font and Paragraph, Adjust, and Effects groups above. Credits are done the same as titles and captions, except they are automatically placed at the end of the movie.   Transitions Go to the Animation tab on the ribbon to apply transitions. Select a clip from the storyboard and hover over one of the transition to see it in the preview window. Click on the transition to apply it to the clip. You can apply transitions separately to clips or hold down Ctrl button while clicking to select multiple clips to which to apply the same transition. Pan and zoom effects are also located on the Animations tab, but can be applied to photos only. Like transition, you can apply them individually to a clip or hold down Ctrl button while clicking to select multiple clips to which to apply the same pan and zoom effect. Once applied, you can adjust the duration of the transitions and pan and zoom effects. You can also click the dropdown for additional transitions or effects. Visual Effects Similar to Pan and Zoom and Transitions, you can apply a variety of Visual Effects to individual or multiple clips. Editing Video and Music Note: This does not actually edit the original video you imported into your Windows Live Movie Maker project, only how it appears in your WLMM project. There are some very basic editing tools located on the Home tab. The Rotate left and Rotate right button will adjust any clip that may be oriented incorrectly. The Fit to music button will automatically adjust the duration of the photos (if you have any in your project) to fit the length of the music in your movie. Audio mix allows you to change the volume level   You can also do some slightly more advanced editing from the Edit tab. Select the video clip on the storyboard and click the Trim tool to edit or remove portions of a video clip. Next, click and drag the sliders in the preview windows to select the are you wish to keep. For example, the area outside the sliders is the area trimmed from the movie. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon.   When you are finished, click Save trim. You can also split your video clips. Move the preview slider to the location in the video clip where you’d like to split it, and select Split. Your video will be split into separate sections. Now you can apply different effects or move them to different locations on the storyboard. Editing Music Clips Select the music clip on the storyboard and then the Options tab on the ribbon. You can adjust the music volume by moving the slider right and left.   You can also choose to have your music clip fade in or out at the beginning and end of your movie. From the Fade in and Fade out dropdowns, select None, Slow, Medium, or Fast. To adjust the sound of your audio clips, click on the Edit tab, select the Video volume button, and adjust the slider. Move it all the way to the left to mute any background noise in your video clips.   AutoMovie As you have seen, Windows Live Movie Maker allows you to add effects, transitions, titles, and more. If you don’t want to do any of that stuff yourself, AutoMovie will automatically add title, credits, cross fade transitions between items, pan and zoom effects to photos, and fit your project to the music. Just select the AutoMovie button on the Home tab. You can go from zero to movie in literally a couple minutes.   Uploading to YouTube You can share your video on YouTube directly from Windows Live Movie Maker. Click on the YouTube icon in the Sharing group on the Home tab. You’ll be prompted for your YouTube username and password. Fill in the details about your movie and click Publish. The movie will be converted to WMV before being uploaded to YouTube. As soon as the YouTube conversion is complete, you’re new movie is live and ready to be viewed. Saving your Movie as a Video File Select the icon at the top left, then select Save movie. As you hover your mouse over each of the options, you will see the output display size, aspect ratio, and estimated file size per minute of video. All of these settings will output your movie as a WMV file. (Unfortunately, the only option is to save a movie as a WMV file.) The only difference is how they are encoded based on preset common settings. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and walks you through the process of creating and burning a DVD.   If you choose the Burn to DVD option, close this window when the WMV file conversion is complete and the Windows DVD Maker will prompt you to begin. When your movie is finished, it’s time to relax and enjoy.   Conclusion Windows Live Movie Maker makes it easy for the average person to quickly churn out nice looking movies and slideshows from there own pictures and videos. However, long time users of previous editions (formerly called Windows Movie Maker) will likely be disappointed by some features missing in Windows Live Movie Maker that existed in earlier editions. Looking for details on burning your new project to DVD, check out our article on how to create and author DVDs with Windows DVD Maker. Download Windows Live Movie Maker Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesCreate and Author DVDs in Windows 7Rotate a Video 90 degrees with VLC or Windows Live Movie MakerInstall Windows Live Essentials In Windows 7How to Make/Edit a movie with Windows Movie Maker in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

  Read the article

• NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

  - by Jagged

  I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

  Read the article

• CodePlex Daily Summary for Tuesday, May 11, 2010

  CodePlex Daily Summary for Tuesday, May 11, 2010New ProjectsASP.NET MVC Extensions: ASP.NET MVC Extensions is developed on top of ASP.NET MVC extensibility point, which allows your IoC Container to rule everywhere.Best practices in .NET: NMA is a collection of knowledges that I learned from my co-worker and Internet. It's built on Domain Driven Design theories. I used Struture Map,...BioRider: Project participant of the 1st National Award for InteroperabilityBSoft: that's the project for bsoftClosedXML - The easy way to OpenXML: ClosedXML makes it easier for developers to create OpenXML files for Excel 2007. It provides a nice object oriented way to manipulate the files (si...Dragon Master: A tool for all D&D masters that need to create Dragon NPCsFacturator - Create invoices easy and fast: Windows forms application for creating invoices based on a Word template. Including a simple workflow for send, payed and finished invoices and a q...FreeEPG: An Australian EPG using the Freeview online guide. All Freeview regions are supported and data can be exported in either XMLTV or Microsoft Media ...GreedyRSS: Convert everything to RSS FeedHByte: In honor of the heisenberg uncertainty principle. This is an implementation of a type who has byte semantics, but who's value and location can not...JSON RPC 2.0 - Javascript/.NET Implementation: JSON RPC 2.0 - Javascript/.NET Implementation - NOT READY YETMjollnir - Supplemental Library for BCL: Mjollnir is Supplements Library for BCL. Mjollnir is Compatible with .NET Framework 4 (or maybe later).Money Spinner: MoneySpinnerMSPY 2010 Open Extended Dictionary Building Tool: A tool to create Open Extend Dictionary for Microsoft Pinyin IME 2010, it is develped in C#Sharepoint Data Store: This is a small library that lets SharePoint developers store and manage custom application information in SharePoint.SharePointSlim: We are going to use it in conjunction with the PowerSlim projectSSTA: A Tool to Compare SQL Database Schema Versionstbeasy: tbeasyNew Releases8085 Microprocessor simulator: 8085 Instruction Set Simulator with source code: 8085 Instruction set simulator with windows installer plus complete source code and examplesAutoArchive: Site Template...: Slightly off topic, but take a looK!BioRider: Uptiva Dreams IT Entry: ==================================== National Interoperability Award ==================================== TEAM: Uptiva Dreams IT PROJECT: BioRide...C# Developer Utility Library: ScrimpNet.Core Library May 2010: Initial upload of project library. Contains only source files. Recommend adding extracted files to your project as a project reference.Coot: Beta 1: To install the screen saver: Extract the contents of the zip file (all three files) to C:\Windows\System32 Go to screen saver properties, select ...Deploy Workflow Manager: Deploy Workflow Manager v1: Recommend you test on your development environment first before implementing into production. Criteria to run the workflow is assumed to be inclu...Expression Encoder 3 Visual Basic Samples: Encoder 3 VB Samples: Zip file contains the Encoder 3 samples written in Visual Basic.FreeEPG: Debug Release: Initial Release. Run the application from the command line for options. If you choose to run the client as a Windows Service, then you will need t...FSharpChess: Alpha Release 0.197: This is just the latest version of the binaries. Note that there are two excecutables: FSharpChess includes a UI partially written in C# FSharpCh...GreedyRSS: GreedyRSS V2: V2与V1相比： 改进了插件架构 用数据库取代XML配置文件 用Web Services暴露了部分功能Headspring Labs: ASP.NET MVC 2 tips and tricks (code): Contains example app that demonstrates techniques in the Tips & Tricks powerpointHeadspring Labs: ASP.NET MVC tips and tricks PPT: Powerpoint file for the ASP.NET MVC tips and tricks talk.HouseFly controls: HouseFly controls beta 1.0.0.0: HouseFly controls release 1.0.0.0 betaiTuner - The iTunes Companion: iTuner 1.2.3782: This production release of iTuner 1.2 allows you to synchronize one or more iTunes playlists to a USB MP3 player. It also provides the ability to ...JSON RPC 2.0 - Javascript/.NET Implementation: v0.7: Protocol implemented. Most of the extra features implemented.MapWindow6: MapWindow 6.0 msi May 10, 2010: This version fixes a reproject bug where false_easting from .prj files was not being correctly converted into meters when the projection was in feet.Mouse Zoom - Visual Studio Extension: MouseZoom 1.7: Version 1.7 fixes a bug that can cause the keys to stick when leaving focus (e.g. opening a VS dialog box).Mouse Zoom - Visual Studio Extension: MouseZoom 1.8: Override mouse wheel scroll functionality to always scroll 25% no matter what zoom level you are on (by default, scrolling with the mouse wheel bec...MSPY 2010 Open Extended Dictionary Building Tool: 20100511build: First release. 1. Installation After you download it to your local disk, create a new folder and unzip it to the new folder, that's it. 2. run ...MSPY 2010 Open Extended Dictionary Building Tool: 20100511build2: First release. 1. Installation After you download it to your local disk, create a new folder and unzip it to the new folder, that's it. 2. run ...Multiwfn: multiwfn1.3.2: multiwfn1.3.2NASA Space Shuttle TV Schedule Transfer to Outlook Calendar: NASA Space Shuttle TV Schedule Release v1.4.132.1: Warning!There is a problem with the latest version of the program and rev 0 of STS-132 mission schedule. I am looking into the problem when the yea...NASA Space Shuttle TV Schedule Transfer to Outlook Calendar: NASA Space Shuttle TV Schedule Release v1.4.132.2: This release fixes a problem with rev 0 of the STS-132 mission schedule in recognizing the year of launch. NASA changed the year of launch to a fo...Object/Relational Mapper & Code Generator in Net 2.0 for Relational & XML Schema: 2.8: Switched compliation options to always run in 32-bit mode, to ensure it can connect to MSAccess & MSExcel on 64-bit machines. Updated parameterised...Open NFSe: OpenNFSe-Salvador v1.0.0: Atualização do OpenNFSe-Salvador para o novo schema utilizado pela prefeitura de Salvador.OpenSLIM: OpenSLIM-v373b0-20100509-0: Here is the list of new additions and improvements that this new major release incorporates: Systems Decommissioning Management. Improvements on...Pcap.Net: Pcap.Net 0.6.0 (44468): Pcap.Net - May 2010 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes ...PowerShell Community Extensions: 2.0 Production: PowerShell Community Extensions 2.0 Release NotesMay 10, 2010 The primary purpose of the Pscx 2.0 release is to convert from the previous approach...Scrum Sprint Monitor: v1.0.0.47921 (.NET 4-TFS 2010): What is new in this release? Minor version over 1.0.0.47911 introducing CEIP (Customer Experience Improvement Program). This is taking advantage of...Sharepoint Data Store: 1.0: First ReleaseSPVisualDev - SharePoint Developer Tool: Version 2.2.0: Visual Studio 2010 is now supported. Note that this is only intended to be used for MOSS 2007 / WSS 3.0 development and not for SP 2010. Package SP...SQL Server PowerShell Extensions: 2.2.1 Production: Release 2.2 re-implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 9 modules with 133 advanced functions, 2 cmdlets and 7 scri...VCC: Latest build, v2.1.30510.0: Automatic drop of latest buildVCC: Latest build, v2.1.30510.1: Automatic drop of latest buildVCC: Latest build, v2.1.30510.2: Automatic drop of latest buildVolumeMaster: Volume Master 2.0 Beta: First release of VolumeMaster. So if you're running Windows Vista / 7 you can have a handy Volume OSD and control your volume with the following sh...WabbitStudio Z80 Software Tools: SPASM2 32-Bit: A test release for SPASM2.Web Camera Shooter: 1.0.0.1: Video capturing: Touchless SDK -> AForge.Video. Main window shown in taskbar and not top most. Native images generated for all assemblies. Sm...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesASP.NETPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemThe Information Literacy Education Learning Environment (ILE)RawrCaliburn: An Application Framework for WPF and SilverlightwhiteBlogEngine.NETTweetSharpjQuery Library for SharePoint Web ServicesIonics Isapi Rewrite Filter

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >