Search Results

Search found 16899 results on 676 pages for 'local'.

Page 510/676 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• Dual-boot computer won't boot without external hard drive

  - by FrankP

  I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

  Read the article

• Failed to start up after upgrading software

  - by Landy

  I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

  Read the article

• Quaternion based rotation and pivot position

  - by Michael IV

  I can't figure out how to perform matrix rotation using Quaternion while taking into account pivot position in OpenGL.What I am currently getting is rotation of the object around some point in the space and not a local pivot which is what I want. Here is the code [Using Java] Quaternion rotation method: public void rotateTo3(float xr, float yr, float zr) { _rotation.x = xr; _rotation.y = yr; _rotation.z = zr; Quaternion xrotQ = Glm.angleAxis((xr), Vec3.X_AXIS); Quaternion yrotQ = Glm.angleAxis((yr), Vec3.Y_AXIS); Quaternion zrotQ = Glm.angleAxis((zr), Vec3.Z_AXIS); xrotQ = Glm.normalize(xrotQ); yrotQ = Glm.normalize(yrotQ); zrotQ = Glm.normalize(zrotQ); Quaternion acumQuat; acumQuat = Quaternion.mul(xrotQ, yrotQ); acumQuat = Quaternion.mul(acumQuat, zrotQ); Mat4 rotMat = Glm.matCast(acumQuat); _model = new Mat4(1); scaleTo(_scaleX, _scaleY, _scaleZ); _model = Glm.translate(_model, new Vec3(_pivot.x, _pivot.y, 0)); _model =rotMat.mul(_model);//_model.mul(rotMat); //rotMat.mul(_model); _model = Glm.translate(_model, new Vec3(-_pivot.x, -_pivot.y, 0)); translateTo(_x, _y, _z); notifyTranformChange(); } Model matrix scale method: public void scaleTo(float x, float y, float z) { _model.set(0, x); _model.set(5, y); _model.set(10, z); _scaleX = x; _scaleY = y; _scaleZ = z; notifyTranformChange(); } Translate method: public void translateTo(float x, float y, float z) { _x = x - _pivot.x; _y = y - _pivot.y; _z = z; _position.x = _x; _position.y = _y; _position.z = _z; _model.set(12, _x); _model.set(13, _y); _model.set(14, _z); notifyTranformChange(); } But this method in which I don't use Quaternion works fine: public void rotate(Vec3 axis, float angleDegr) { _rotation.add(axis.scale(angleDegr)); // change to GLM: Mat4 backTr = new Mat4(1.0f); backTr = Glm.translate(backTr, new Vec3(_pivot.x, _pivot.y, 0)); backTr = Glm.rotate(backTr, angleDegr, axis); backTr = Glm.translate(backTr, new Vec3(-_pivot.x, -_pivot.y, 0)); _model =_model.mul(backTr);///backTr.mul(_model); notifyTranformChange(); }

  Read the article

• Headaches using distributed version control for traditional teams?

  - by J Cooper

  Though I use and like DVCS for my personal projects, and can totally see how it makes managing contributions to your project from others easier (e.g. your typical Github scenario), it seems like for a "traditional" team there could be some problems over the centralized approach employed by solutions like TFS, Perforce, etc. (By "traditional" I mean a team of developers in an office working on one project that no one person "owns", with potentially everyone touching the same code.) A couple of these problems I've foreseen on my own, but please chime in with other considerations. In a traditional system, when you try to check your change in to the server, if someone else has previously checked in a conflicting change then you are forced to merge before you can check yours in. In the DVCS model, each developer checks in their changes locally and at some point pushes to some other repo. That repo then has a branch of that file that 2 people changed. It seems that now someone must be put in charge of dealing with that situation. A designated person on the team might not have sufficient knowledge of the entire codebase to be able to handle merging all conflicts. So now an extra step has been added where someone has to approach one of those developers, tell him to pull and do the merge and then push again (or you have to build an infrastructure that automates that task). Furthermore, since DVCS tends to make working locally so convenient, it is probable that developers could accumulate a few changes in their local repos before pushing, making such conflicts more common and more complicated. Obviously if everyone on the team only works on different areas of the code, this isn't an issue. But I'm curious about the case where everyone is working on the same code. It seems like the centralized model forces conflicts to be dealt with quickly and frequently, minimizing the need to do large, painful merges or have anyone "police" the main repo. So for those of you who do use a DVCS with your team in your office, how do you handle such cases? Do you find your daily (or more likely, weekly) workflow affected negatively? Are there any other considerations I should be aware of before recommending a DVCS at my workplace?

  Read the article

• Expanding Influence and Community

  - by Johnm

  When I was just nine years of age my father introduced me to the computer. It was a Radio Shack TRS-80 Color Computer (aka: CoCo). He shared with me the nuances of writing BASIC and it wasn't long before I was in the back seat of the school bus scribbling, on a pad of paper, the code I would later type. My father demonstrated that while my friends were playing their Atari 2600 consoles, I had the unique opportunity to create my own games on the Coco. One of which provided a great friend of mine hours and hours of hilarity and entertainment. It wasn't long before my father was inviting me to tag along as he drove to the local high school where a gathering of fellow Coco enthusiasts assembled. In these meetings all in attendance would chat about their latest challenges and solutions. They would swap the labors of their sleepless nights eagerly gazing into their green and black screens. Friendships were built and business partners were developed. While these experiences at the time in my pre-teen mind were chalked up to simply sharing time with my father, it had a tremendous impact on me later in life. This past weekend I attended the Louisville SQL Saturday (#45). It was great to see that there were some who brought along their children. It is encouraging to see fresh faces in the crowd at our  monthly IndyPASS meetings. Each time I see the youthful eyes peering from the audience while the finer details of SQL Server is presented, I cannot help but to be transported back to the experiences that I enjoyed in those Coco days. It is exciting to think of how these experiences are impacting their lives and stimulating their minds. Some of these children have actually approached me asking questions about what was presented or simply bragging about their latest discovery in programming. One of the topics that arose in the "Women in Technology" session in Louisville, which was masterfully facilitated by Kathi Kellenberger, was exploring how we could ignite the spark of interest in databases among the youth. It was awesome to hear that there were some that volunteer their time to share their experiences with students. It made me wonder what user groups could achieve if we were to consider expanding our influence and community beyond our immediate peers to include those who are simply enjoying their time with their father or mother.

  Read the article

• Running Built-In Test Simulator with SOA Suite Healthcare 11g in PS4 and PS5

  - by Shub Lahiri, A-Team

  Background SOA Suite for Healthcare Integration pack comes with a pre-installed simulator that can be used as an external endpoint to generate inbound and outbound HL7 traffic on specified MLLP ports. This is a command-line utility that can be very handy when trying to build a complete end-to-end demo within a standalone, closed environment. The ant-based utility accepts the name of a configuration file as the command-line input argument. The format of this configuration file has changed between PS4 and PS5. In PS4, the configuration file was XML based and in PS5, it is name-value property based. The rest of this note highlights these differences and provides samples that can be used to run the first scenario from the product samples set. PS4 - Configuration File The sample configuration file for PS4 is shown below. The configuration file contains information about the following items: Directory for incoming and outgoing files for the host running SOA Suite Healthcare Polling Interval for the directory External Endpoint Logical Names External Endpoint Server Host Name and Ports Message throughput to be simulated for generating outbound messages Documents to be handled by different endpoints A copy of this file can be downloaded from here. PS5 - Configuration File The corresponding sample configuration file for PS5 is shown below. The configuration file contains similar information about the sample scenario but is not in XML format. It has name-value pairs specified in the form of a properties file. This sample file can be downloaded from here. Simulator Configuration Before running the simulator, the environment has to be set by defining the proper ANT_HOME and JAVA_HOME. The following extract is taken from a working sample shell script to set the environment: Also, as a part of setting the environment, template jndi.properties and logging.properties can be generated by using the following ant command: ant -f ant-b2bsimulator-util.xml b2bsimulator-prop Sample jndi.properties and logging.properties are shown below and can be modified, as needed. The jndi.properties contains information about connectivity to the local Weblogic Managed Server instance and the logging.properties file controls the amount of logging that can be generated from the running simulator process. Simulator Usage - Start and Stop The command syntax to launch the simulator via ant is the same in PS4 and PS5. Only the appropriate configuration file has to be supplied as the command-line argument, for example: ant -f ant-b2bsimulator-util.xml b2bsimulatorstart -Dargs="simulator1.hl7-config.xml" This will start the simulator and will keep running to provide an active external endpoint for SOA Healthcare Integration engine. To stop the simulator, a similar ant command can be used, for example: ant -f ant-b2bsimulator-util.xml b2bsimulatorstop

  Read the article

• No wireless connection using a conceptronic c54i (RT2561/RT61 rev B)

  - by jrosell

  Detected but not working. New install on ubuntu 11.10 using coneptronic C54Ri. As documentation says it uses Ralink drivers.... Any ideas why my wireless does not work? $ lspci -nn | grep -i 'ralink' 01:05.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:90:e5:af:13 inet addr:192.168.0.197 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21e:90ff:fee5:af13/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28361 errors:0 dropped:0 overruns:0 frame:0 TX packets:16858 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39812172 (39.8 MB) TX bytes:1633405 (1.6 MB) Interrupt:43 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6608 (6.6 KB) TX bytes:6608 (6.6 KB) iwconfig wlan0 wlan0 IEEE 802.11abg ESSIDff/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff lsmod | grep rt rt61pci 27493 0 crc_itu_t 12627 1 rt61pci rt2x00pci 14202 1 rt61pci rt2x00lib 48114 2 rt61pci,rt2x00pci mac80211 272785 2 rt2x00pci,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 eeprom_93cx6 12653 1 rt61pci parport_pc 32114 1 parport 40930 3 ppdev,parport_pc,lp lsmod | grep rt [ 2497.816989] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.827112] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.837430] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847528] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x0000308c, value=0xffffffff [ 2497.847632] phy0 -> rt61pci_wait_bbp_ready: Error - BBP register access faile d, aborting. [ 2497.847637] phy0 -> rt61pci_set_device_state: Error - Device failed to enter state 4 (-5). sudo lshw -C network *-network DISABLED description: Wireless interface product: RT2561/RT61 rev B 802.11g vendor: Ralink corp. physical id: 5 bus info: pci@0000:01:05.0 logical name: wlan0 version: 00 serial: fa:b8:14:58:62:35 width: 32 bits clock: 33MHz capabilities: pm cap_list ethernet physical wireless configuration: broadcast=yes driver=rt61pci driverversion=3.0.0-12-generic firmware=0.8 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:fdef8000-fdefffff iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan0 Failed to read scan data : Network is down uname -mr 3.0.0-12-generic i686 Edit 1 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no On reboot, sudo lshw -C network returns network is ok. Hovever, WPA keeps on asking the wireless key

  Read the article

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

• PeopleSoft New Design Solves Navigation Problem

  - by Applications User Experience

  Anna Budovsky, User Experience Principal Designer, Applications User Experience In PeopleSoft we strive to improve User Experience on all levels. Simplifying navigation and streamlining access to the most important pages is always an important goal. No one likes to waste time waiting for pages to load and watching a spinning glass going on and on. Those performance-affecting server trips, page-load waits and just-too-many clicks were complained about for a long time. Something had to be done. A few new designs came in PeopleSoft 9.2 helping users to access their everyday work areas easier and faster. For example, Dashboard and Work Center aggregate most accessed information sections on a single page; Related Information allows users to complete transaction-related-research without interrupting a transaction and Secure Search gets users to a specific page directly. Today we’ll talk about the Actions menu. Most PeopleSoft pages are shared between individual products and product lines. It means changing the content on a single page involves Oracle development and quality assurance time for making and testing the changes. In order to streamline the navigation and cut down on accessing PeopleSoft pages one-page-at-a-time, we introduced a new menu design. The new menu allows accessing shared pages without the Oracle development team making any local changes, and it works as an additional one-click-path to specific high-traffic actionable pages. Let’s look at how many steps it took to Change Salary for an employee in HCM 9.1 before: Figure 1. BEFORE: The 6 steps a user would take to Change Salary in PeopleSoft HCM 9.1 In PeopleSoft 9.1 it took 5 steps + page loading time + additional verification time for making sure a correct employee is selected from the table. In PeopleSoft 9.2 it only takes 2 steps. To complete Ad Hoc Change Salary action, the user can start from the HCM Manager's Dashboard, click the Action menu within a table, choose a menu option, and access a correct employee’s details page to take an action. Figure 2. AFTER: The 2 steps a user would take to Change Salary in PeopleSoft HCM 9.2 The new menu is placed on a row level which ensures the user accesses the correct employee’s details page. The Actions menu separates menu options into hierarchical sections which help to scan and access the correct option quickly. The new menu’s small size and its structure enabled users to access high-traffic pages from any page and from any part of the page. No more spinning hourglass, no more multiple pages upload. The flexible design fits anywhere on a page and provides a fast and reliable path to the correct destination within the product. Now users can: Access any target page no matter how far it is buried from the starting point; Reduce navigation and page-load time; Improve productivity and reduce errors. The new menu design is available and widely used in all PeopleSoft 9.2 product lines.

  Read the article

• How to interview a natural scientist for a dev position?

  - by Silas

  I already did some interviews for my company, mostly computer scientists for dev positions but also some testers and project managers. Now I have to fill a vacancy in our research group within the R&D department (side note: “research” means that we try to solve problems in our professional domain/market niche using software in research projects together with universities, other companies, research centres and end user organisations. It’s not computer science research; we’re not going to solve the P=NP problem). Now we invited a guy holding an MSc in chemistry (with a lot of physics in his CV, too), who never had any computer science lesson. I already talked with him about half an hour at a local university’s career days and there’s no doubt the guy is smart. Also his marks are excellent and he graduated with distinction. For his BSc he needed to teach himself programming in Mathematica and told me believably that he liked programming a lot. Also he solved some physical chemistry problem that I probably don’t understand using his own software, implemented in Mathematica, for his MSc thesis. It includes a GUI and a notable size of 8,000 LoC. He seems to be very attracted by what we’re doing in our research group and to be honest it’s quite difficult for an SME like us to get good people. I also am very interested in hiring him since he could assist me in writing project proposals, reports, doing presentations and so on. He would probably fit to our team, too. The only question left is: How can I check if he will get the programming skills he needs to do software implementation in our projects since this will be a significant part of the job? Of course I will ask him what it is, that is fascinating him about programming. I’ll also ask how he proceeded to write his natural science software and how he structured it. I’ll ask about how he managed to obtain the skills and information about software development he needed. But is there something more I could ask? Something more concrete perhaps? Should I ask him to explain his Mathematica solution? To be clear: I’m not looking for knowledge in a particular language or technology stack. We’re a .NET shop in product development but I want to have a free choice for our research projects. So I’m interested in the meta-competence being able to learn whatever is actually needed. I hope this question is answerable and not open-ended since I really like to know if there is a default way to check for the ability to get further programming skills on the job. If something is not clear to you please give me some comments and let me improve my question.

  Read the article

• Quickly Copy Movie Files to Individually Named Folders

  - by DigitalGeekery

  Some HTPC media manager applications require movie files to be in stored in separate folders to properly store information such as cover art images and other metadata. Here we look at copying movie files to individual folders. If you already have a large movie collection stored in a single folder, we’ll show you how to quickly move those files into their own individually named folders. File2Folder FIle2folder is a handy portable app that automatically creates and moves movie files into a folder of the same filename. There is no installation needed. Simply download and run the .exe file (link below). Enter the current movie directory, or browse for the folder. File2folder now supports both local and network shares. When you are ready to create the folders and move the files, click Move! You’ll see the move progress displayed in the window. When the process is finished, you’ll have all your movie file in individual folders.   Change your mind? Just click the Undo! button…   …and the move and folder creation process will be undone. If you would like to have the folder monitored for new files, click the Start button. File2folder will process any new files it discovers every 180 seconds. To turn it off, click Stop. This simple little program is a huge timesaver for those looking to organize movie collections for their HTPC. We should also note that this will work with any files, not just videos. Download file2folder Similar Articles Productive Geek Tips Hack: Turn Off Debug Mode in VMWare Workstation 6 BetaAdd Images and Metadata to Windows 7 Media Center Movie LibraryAdd Folders to the Movie Library in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterMove the Public Folder in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician

  Read the article

• Best way to remote restart Ubuntu from Windows machine

  - by robsoft

  Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

  Read the article

• determine if udp socket can be accessed via external client

  - by JohnMerlino

  I don't have access to company firewall server. but supposedly the port 1720 is open on my one ubuntu server. So I want to test it with netcat: sudo nc -ul 1720 The port is listening on the machine ITSELF: sudo netstat -tulpn | grep nc udp 0 0 0.0.0.0:1720 0.0.0.0:* 29477/nc The port is open and in use on the machine ITSELF: lsof -i -n -P | grep 1720 gateway 980 myuser 8u IPv4 187284576 0t0 UDP *:1720 Checked the firewall on current server: sudo ufw allow 1720/udp Skipping adding existing rule Skipping adding existing rule (v6) sudo ufw status verbose | grep 1720 1720/udp ALLOW IN Anywhere 1720/udp ALLOW IN Anywhere (v6) But I try echoing data to it from another computer (I replaced the x's with the real integers): echo "Some data to send" | nc xx.xxx.xx.xxx 1720 But it didn't write anything. So then I try with telnet from the other computer as well: telnet xx.xxx.xx.xxx 1720 Trying xx.xxx.xx.xxx... telnet: connect to address xx.xxx.xx.xxx: Operation timed out telnet: Unable to connect to remote host Although I don't think telnet works with udp sockets. I ran nmap from another computer within the same local network and this is what I got: sudo nmap -v -A -sU -p 1720 xx.xxx.xx.xx Starting Nmap 5.21 ( http://nmap.org ) at 2013-10-31 15:41 EDT NSE: Loaded 36 scripts for scanning. Initiating Ping Scan at 15:41 Scanning xx.xxx.xx.xx [4 ports] Completed Ping Scan at 15:41, 0.10s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:41 Completed Parallel DNS resolution of 1 host. at 15:41, 0.00s elapsed Initiating UDP Scan at 15:41 Scanning xtremek.com (xx.xxx.xx.xx) [1 port] Completed UDP Scan at 15:41, 0.07s elapsed (1 total ports) Initiating Service scan at 15:41 Initiating OS detection (try #1) against xtremek.com (xx.xxx.xx.xx) Retrying OS detection (try #2) against xtremek.com (xx.xxx.xx.xx) Initiating Traceroute at 15:41 Completed Traceroute at 15:41, 0.01s elapsed NSE: Script scanning xx.xxx.xx.xx. NSE: Script Scanning completed. Nmap scan report for xtremek.com (xx.xxx.xx.xx) Host is up (0.00013s latency). PORT STATE SERVICE VERSION 1720/udp closed unknown Too many fingerprints match this host to give specific OS details Network Distance: 1 hop TRACEROUTE (using port 1720/udp) HOP RTT ADDRESS 1 0.13 ms xtremek.com (xx.xxx.xx.xx) Read data files from: /usr/share/nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 2.04 seconds Raw packets sent: 27 (2128B) | Rcvd: 24 (2248B). The only thing I can think of is a firewall or vpn issue. Is there anything else I can check for before requesting that they look at the firewall server again?

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• My Doors - Why Standards Matter to Business

  - by [email protected]

  By Brian Dayton on April 8, 2010 9:27 PM "Standards save money." "Standards accelerate projects." "Standards make better solutions." What do these statements mean to you? You buy technology solutions like Oracle Applications but you're a business person--trying to close the quarter, get performance reviews processed, negotiate a new sourcing contract, etc. When "standards" come up in presentations and discussions do you: - Nod your head politely - Tune out and check your smart phone - Turn to your IT counterpart and say "Bob's all over this standards thing, right Bob?" Here's why standards matter. My wife wants new external doors downstairs, ones that would get more light into the rooms. Am I OK with that? "Uhh, sure...it's a little dark in the kitchen." - 24 hours ago - wife calls to tell me that she's going to the hardware store and may look at doors - 20 hours ago - wife pulls into driveway, informs me that two doors are in the back of her station wagon, ready for me to carry - 19 hours ago - I re-discovered the fact that it's not fun to carry a solid wood door by myself - 5 hours ago - Local handyman, who was at our house anyway, tells me that the doors we bought will likely cost 2-3x the material cost in installation time and labor...the doors are standard but our doorways aren't We could have done more research. I could be more handy. Sure. But the fact is, my 1951 house wasn't built with me in mind. They built what worked and called it a day. The same holds true with a lot of business applications. They were designed and architected for one-time use with one use-case in mind. Today's business climate is different. If you're going to use your processes and technology to differentiate your business you should have at least a working knowledge of: - How standards can benefit your business - Your IT organization's philosophy around standards - Your vendor's track-record around standards...and watch for those who pay lip-service to standards but don't follow through The rallying cry in most IT organizations today is "learn more about the business, drop the acronyms." I'm not advocating that you go out and learn how to code in Java. But I do believe it will help your business and your decision-making process if you meet IT ½...even ¼ of the way there. Epilogue: The door project has been put on hold and yours truly has to return the doors to the hardware store tomorrow.

  Read the article

• Monitoring C++ applications

  - by Scott A

  We're implementing a new centralized monitoring solution (Zenoss). Incorporating servers, networking, and Java programs is straightforward with SNMP and JMX. The question, however, is what are the best practices for monitoring and managing custom C++ applications in large, heterogenous (Solaris x86, RHEL Linux, Windows) environments? Possibilities I see are: Net SNMP Advantages single, central daemon on each server well-known standard easy integration into monitoring solutions we run Net SNMP daemons on our servers already Disadvantages: complex implementation (MIBs, Net SNMP library) new technology to introduce for the C++ developers rsyslog Advantages single, central daemon on each server well-known standard unknown integration into monitoring solutions (I know they can do alerts based on text, but how well would it work for sending telemetry like memory usage, queue depths, thread capacity, etc) simple implementation Disadvantages: possible integration issues somewhat new technology for C++ developers possible porting issues if we switch monitoring vendors probably involves coming up with an ad-hoc communication protocol (or using RFC5424 structured data; I don't know if Zenoss supports that without custom Zenpack coding) Embedded JMX (embed a JVM and use JNI) Advantages consistent management interface for both Java and C++ well-known standard easy integration into monitoring solutions somewhat simple implementation (we already do this today for other purposes) Disadvantages: complexity (JNI, thunking layer between native C++ and Java, basically writing the management code twice) possible stability problems requires a JVM in each process, using considerably more memory JMX is new technology for C++ developers each process has it's own JMX port (we run a lot of processes on each machine) Local JMX daemon, processes connect to it Advantages single, central daemon on each server consistent management interface for both Java and C++ well-known standard easy integration into monitoring solutions Disadvantages: complexity (basically writing the management code twice) need to find or write such a daemon need a protocol between the JMX daemon and the C++ process JMX is new technology for C++ developers CodeMesh JunC++ion Advantages consistent management interface for both Java and C++ well-known standard easy integration into monitoring solutions single, central daemon on each server when run in shared JVM mode somewhat simple implementation (requires code generation) Disadvantages: complexity (code generation, requires a GUI and several rounds of tweaking to produce the proxied code) possible JNI stability problems requires a JVM in each process, using considerably more memory (in embedded mode) Does not support Solaris x86 (deal breaker) Even if it did support Solaris x86, there are possible compiler compatibility issues (we use an odd combination of STLPort and Forte on Solaris each process has it's own JMX port when run in embedded mode (we run a lot of processes on each machine) possibly precludes a shared JMX server for non-C++ processes (?) Is there some reasonably standardized, simple solution I'm missing? Given no other reasonable solutions, which of these solutions is typically used for custom C++ programs? My gut feel is that Net SNMP is how people do this, but I'd like other's input and experience before I make a decision.

  Read the article

• Professional immigration

  - by etranger

  Hello all, Does anyone here have a practical advice on professional relocation from Russia to Europe? The reasons behind making such a decision are far beyond the subject, perhaps, so I'll stick to the practical part. Having done some of the "common stuff" for finding a job, I am now facing two serious problems: I am a "dual-class" person, with university degree in marketing, and multiple years of self-studied computer competence (hence my writing here). Have professional experience in both areas. I don't currently hold a European work permit. From what I can see, this results in normal HR person throwing out my CV as either being "overqualified" or "too much trouble with making the permit". I do have the skills and character to start my own business, but it requires start-up capital that I don't have, over the last years I had to pay high bills for medical treatment of my family member, who had deceased. Now, I'm almost out of debts. As you can probably guess, English is not a problem, and I'm open to new languages, but first steps of entering the market, or the society, is the problematic part. I live close to Norway, and am trying to get some professional contacts there, but it hasn't got me any practical perspective so far. Any advice is greatly appreciated. EDIT: I am currently making my living off web site development, and occasional consulting services both in IT and marketing. For purely geographic reasons I'm dealing with clients that reside in the same city where I live, pop. 350 000. Being quite local, market requirements for web sites are simple and stable — clients need to control navigation, write articles in a word-like editor, upload illustrations and place ad banners, all with no additional programming. As many web developers do, I'm using my own content management system that fits these expectations. I have also started developing a newer version of this system that has better support for international environments, but I'm too distant from the real market demand in Europe to speak of the right track here. Technically it's based on php/mysql and uses xslt for templating. It allows for quick website deployment, and has architectural neatness, lack of which made me abandon similar opensource solutions (Joomla and the like). Deploying time from rasterized design proofs is normally under 6-8 working hours, don't know how that compares to the world practice. EDIT 2: Can anyone share what Norwegian (Scandinavian) web solutions market currently demands?

  Read the article

• OOF checklist

  - by Daniel Moth

  When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Failed to start up after upgrading software in ubuntu 10.10

  - by Landy

  I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

  Read the article

• Small hiccup with VMware Player after upgrading to Ubuntu 12.04

  The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

  Read the article

• Need help on a problemset in a programming contest

  - by topher

  I've attended a local programming contest on my country. The name of the contest is "ACM-ICPC Indonesia National Contest 2013". The contest has ended on 2013-10-13 15:00:00 (GMT +7) and I am still curious about one of the problems. You can find the original version of the problem here. Brief Problem Explanation: There are a set of "jobs" (tasks) that should be performed on several "servers" (computers). Each job should be executed strictly from start time Si to end time Ei Each server can only perform one task at a time. (The complicated thing goes here) It takes some time for a server to switch from one job to another. If a server finishes job Jx, then to start job Jy it will need an intermission time Tx,y after job Jx completes. This is the time required by the server to clean up job Jx and load job Jy. In other word, job Jy can be run after job Jx if and only if Ex + Tx,y = Sy. The problem is to compute the minimum number of servers needed to do all jobs. Example: For example, let there be 3 jobs S(1) = 3 and E(1) = 6 S(2) = 10 and E(2) = 15 S(3) = 16 and E(3) = 20 T(1,2) = 2, T(1,3) = 5 T(2,1) = 0, T(2,3) = 3 T(3,1) = 0, T(3,2) = 0 In this example, we need 2 servers: Server 1: J(1), J(2) Server 2: J(3) Sample Input: Short explanation: The first 3 is the number of test cases, following by number of jobs (the second 3 means that there are 3 jobs for case 1), then followed by Ei and Si, then the T matrix (sized equal with number of jobs). 3 3 3 6 10 15 16 20 0 2 5 0 0 3 0 0 0 4 8 10 4 7 12 15 1 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 8 10 4 7 12 15 1 4 0 50 50 50 50 0 50 50 50 50 0 50 50 50 50 0 Sample Output: Case #1: 2 Case #2: 1 Case #3: 4 Personal Comments: The time required can be represented as a graph matrix, so I'm supposing this as a directed acyclic graph problem. Methods I tried so far is brute force and greedy, but got Wrong Answer. (Unfortunately I don't have my code anymore) Could probably solved by dynamic programming too, but I'm not sure. I really have no clear idea on how to solve this problem. So a simple hint or insight will be very helpful to me.

  Read the article

• Nautilus ignores / misinterprets view size

  - by BlueZero4

  I noticed that a lot of my folders had suddenly switched to higher view sizes than I had specificied. I was assuming that somehow nautilus had suddenly decided to create per-folder entries for said folders with incorrect view sizes. So I found this question: How to reset all per-folder view settings in nautilus? I found the folder specified in the answer (~/.local/share/gvfs-metadata) and found that it was actually important to delete the files INSIDE the folder, because for some reason deleting the folder itself didn't work for some reason. After doing that, I discovered that the odd setting was for the default view settings, not for a handful of files. Nautilus actually handles the per-folder settings like it should, but it ignores the global folder settings. I want Nautilus to, by default, display all non-specified folders as compact view, 50%. My folders are using the compact setting like I want, but they are not down to 50%. At a guess, they are at 100%. Altering the view size of the icon view can set the compact view to 33%, but I'm not sure by what mechanism this functions. I haven't extensively tested the other view sizes because I don't plan on using them much at all. Next I looked up questions like How do I reset nautilus to the default configuration? I'm expecting the problem to be a corrupted config file or something of the sort, so I hunted down directories like ~/.nautilus, ~/.gconf/apps/nautilus, and ~/.gnome2/nautilus. (I don't have a ~/.nautilus directory, so I'm assuming that's only for older versions.) I attempted to remove the contents of each, but I can't seem to force Nautilus back to default configuration settings. Actually viewing Nautilus's preferences in GConf made the settings look like they were what I wanted them to be, which is odd. I'd like to force Nautilus to default settings, basically. Though if something else will fix it, I'll take it too. I'm not interested in doing a full uninstall, reinstall of Nautilus if I don't have to. ==EDIT1== Turns out that Nautilus just writes the settings in GConf for the heck of it. Nautilus only really uses the settings that it stores in DConf. I did gsettings reset-recursively org.gnome.nautilus, which actually did reset Nautilus to default, but it still doesn't like my view size settings.

  Read the article

• Travelling at Magenic

  - by Chris G. Williams

  I occasionally get asked if we travel "a lot" at Magenic. Sometimes the question comes from job candidates. Other times it's clients, recruiters or friends. To give a simple yes or no answer would be a disservice to the person asking the question. So here is my standard answer:It depends.(That was the short version.  Here's the long version...)We do have some guys that are more "national" in focus, and they can travel a fair amount. They also receive a little extra in compensation for doing so. It's a balancing act, and not necessarily a one-size-fits-all situation. Not everyone is well suited to constant travel. Some folks enjoy it and some folks hate it.With our local guys, our general policy is to TRY and keep them close to home whenever possible, but sometimes the needs of the client will dictate otherwise. (As Spock would say... the needs of the many outweigh the needs of the few, or the one.)In most cases though, we really do try to avoid sending our guys on extended travel gigs (i.e. every week for 6 months) when a simple kickoff trip and occasional visit will do. This depends on the nature of the gig, of course. Some types of work lend themselves to this model better than others. Additionally, this can and does vary by office. If one office is having trouble staffing a gig (not enough available bodies) and another office has a few too many folks on the bench, well... you can connect the dots. But again, we try to keep that to a minimum.Lastly, we all have our own thresholds for what we consider "a lot" of travel. There are two parts to this threshold:Half of it is whatever you're accustomed to already. The other half is being honest with yourself about how much you [like/hate] dealing with airports, car rentals, taxis, hotels, disruptions to your workout schedule, time away from friends/family, etc.Knowing a bit about yourself will definitely help you decide how much travel is too much for you.

  Read the article

• why client can not receive message from server (java) [migrated]

  - by user1745931

  I have just started learning java. I modified the client side code for a server/client communication program, by creating two threads for the client side, main thread for receiving user's input, and inputThread for receiving server's response. I am sure that server has sent the response to client, however, no response message is obtain at client. Here is my code. Can anyone help me to figure it out? Thanks package clientnio; import java.net.*; import java.nio.*; import java.io.*; import java.nio.channels.*; import java.util.Scanner; public class ClientNIO { public static int bufferLen = 50; public static SocketChannel client; public static ByteBuffer writeBuffer; public static ByteBuffer readBuffer; public static void main(String[] args) { writeBuffer = ByteBuffer.allocate(bufferLen); readBuffer = ByteBuffer.allocate(bufferLen); try { SocketAddress address = new InetSocketAddress("localhost",5505); System.out.println("Local address: "+ address); client=SocketChannel.open(address); client.configureBlocking(false); //readBuffer.flip(); new inputThread(readBuffer); /* String a="asdasdasdasddffasfas"; writeBuffer.put(a.getBytes()); writeBuffer.clear(); int d=client.write(writeBuffer); writeBuffer.flip(); */ while (true) { InputStream inStream = System.in; Scanner scan = new Scanner(inStream); if (scan.hasNext()==true) { String inputLine = scan.nextLine(); writeBuffer.put(inputLine.getBytes()); //writeBuffer.clear(); System.out.println(writeBuffer.remaining()); client.write(writeBuffer); System.out.println("Sending data: "+new String(writeBuffer.array())); writeBuffer.flip(); Thread.sleep(300); } } } catch(Exception e) { System.out.println(e); } } } class inputThread extends Thread { private ByteBuffer readBuffer; public inputThread(ByteBuffer readBuffer1) { System.out.println("Receiving thread starts."); this.readBuffer = readBuffer1; start(); } @Override public void run() { try { while (true) { readBuffer.flip(); int i=ClientNIO.client.read(readBuffer); if(i>0) { byte[] b=readBuffer.array(); System.out.println("Receiving data: "+new String(b)); //client.close(); //System.out.println("Connection closed."); //break; } Thread.sleep(100); } } catch (Exception e) { System.out.println(e); } } }

  Read the article

• sony vaio WLAN problem using 12.04

  - by Fredrik

  I'm unable to get my WLAN to work for my Sony Vaio model VPCF23C5E No problem connecting from windows, smartphones etc. $ sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 64:27:37:92:99:0f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-29-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:f7000000-f707ffff memory:f7080000-f708ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: f0:bf:97:dd:b2:bd size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-1.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:50 ioport:9000(size=256) memory:e2104000-e2104fff memory:e2100000-e2103fff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise Linux siriedit 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no [ 1.287449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 18.273582] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS Seen some proposed solution e.g. Wireless network cannot be enabled for Sony VAIO E series but answers there don't solve my problem... I'm out of ideas :-( What else can I check? update $ ifconfig -a eth0 Link encap:Ethernet HWaddr f0:bf:97:dd:b2:bd inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f2bf:97ff:fedd:b2bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 TX packets:4444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4568435 (4.5 MB) TX bytes:610624 (610.6 KB) Interrupt:50 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1498 errors:0 dropped:0 overruns:0 frame:0 TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:114156 (114.1 KB) TX bytes:114156 (114.1 KB) wlan0 Link encap:Ethernet HWaddr 64:27:37:92:99:0f inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6627:37ff:fe92:990f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:483155 (483.1 KB) TX bytes:61031 (61.0 KB)

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >