Search Results

Search found 25727 results on 1030 pages for 'solution'.

Page 512/1030 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• Re-configuring mysql-server 5.1

  - by sitonico

  Hi all! Some days ago I had some problems with updates, and this ended up with a problem that I already solved in this question . The problem is that now I want to update again, but it seems that I cannot do it automatically, because when I use the update manager it gets stuck while configuring mysql-server 5.1, in the line : Configuring mysql-server 5.1 (5.1.41-3ubuntu12.10)... I have been looking for some solution but it seems hard because actually I don't know where to start, so any hints are appreciated. Thanks in advance! Alf.

  Read the article

• Getting around the FAT32 4GB file size limit

  - by Aesir

  I recently purchased a 32GB USB 3 stick that was formatted FAT32. I plugged it into my computer and attempted to copy a film onto it, the file was over 4GB however and it would not let me copy the file across because of the 4GB file size limit imposed by FAT32. After some googling I found that I could format my USB stick to have an exFAT format which would mean I could put files onto the stick greater than 4GB in size and the drive would work on both my Mac and my PC. The problem with this solution is that my PS3 cannot detect the USB stick when it is formatted with exFAT. I would like to know if there is a way I can have my USB stick formatted so it can have files greater than 4 GB and work on my PC, Mac and PS3.

  Read the article

• Time difference between servers after disaster recovery

  - by Sandokan

  We are running an old training system based on Windows Server 2003 and XP-clients. The solution is rather simple with four servers, two of them beeing DC:s. Everything is preconfigured and that goes for backup scheme as well. The backup software is Symantec BackupExec 2010. The scheme is a standard GF-F-S routine with full backups running once a week on Sundays. The other six days run differential backups. Now let's say in a worst case scenario, a server crashes on Saturday and we have to restore it from backup. The last backup will then be six days old and thus it will come online with six days old configurations. Will this pose a problem for the other servers or will the recovered server "get in line" eventually?

  Read the article

• Windows Server 2008: Limit UDP/TCP packets per IP or ban

  - by WBAR

  How I can limit UDP/TCP packets per IP send to my host (or better PORT) per second or minute ? Would be nice to ban that IP for 12/24 hours or even for ever. I got Windows Server 2008 and I'm very poor in Windows administration but quite good in Linux. EDIT: By basic problem is that They sending a lot of rubbish UPD and TCP packets.. TCP packets without SYNCH, fragmented UDP packets so my servers stop responding.. So I need to cut off users (IPs) sending more than X packets per second. I need solution witch provides me, somehow, configurable: X packets of certain type (UDP, TCP or both - lets say parameter named Z ) are allowed to be received by IP on Y port, otherwise this packet should be DROPPED. My virtual hosts are hosted by VirtualBox and I'm able to forward all incoming packets certain type and certain port to the specific Virtual Host, but I need to DROP them before my VirtualBox receive them.

  Read the article

• How to implement child-parent aggregation link in C++?

  - by Giorgio

  Suppose that I have three classes P, C1, C2, composition (strong aggregation) relations between P <>- C1 and P <>- C2, i.e. every instance of P contains an instance of C1 and an instance of C2, which are destroyed when the parent P instance is destroyed. an association relation between instances of C1 and C2 (not necessarily between children of the same P). To implement this, in C++ I normally define three classes P, C1, C2, define two member variables of P of type boost::shared_ptr<C1>, boost::shared_ptr<C2>, and initialize them with newly created objects in P's constructor, implement the relation between C1 and C2 using a boost::weak_ptr<C2> member variable in C1 and a boost::weak_ptr<C1> member variable in C2 that can be set later via appropriate methods, when the relation is established. Now, I also would like to have a link from each C1 and C2 object to its P parent object. What is a good way to implement this? My current idea is to use a simple constant raw pointer (P * const) that is set from the constructor of P (which, in turn, calls the constructors of C1 and C2), i.e. something like: class C1 { public: C1(P * const p, ...) : paren(p) { ... } private: P * const parent; ... }; class P { public: P(...) : childC1(new C1(this, ...)) ... { ... } private: boost::shared_ptr<C1> childC1; ... }; Honestly I see no risk in using a private constant raw pointer in this way but I know that raw pointers are often frowned upon in C++ so I was wondering if there is an alternative solution.

  Read the article

• How can I get ssh-agent working over ssh and in tmux (on OS X)?

  - by Rich

  I have a private key set up for my github account, the passphrase to which is, I believe, stored in OS X's keychain. I certainly don't have to type it in when I open a terminal window and enter ssh [email protected]. However, when I'm running bash over an ssh session, or locally inside a tmux session, I have to type in the passphrase every single time I attempt to ssh to github. This question suggests that a similar problem exists with screen, but I don't really understand the issue well enough to fix it in tmux. There's also this page which includes a fairly complicated solution, but for zsh. EDIT: In response to @Mikel's answer, from a local terminal I get the following output: [~] $ echo $SSH_AUTH_SOCK /tmp/launch-S4HBD6/Listeners [~] $ ssh-add -l 2048 [my key fingerprint] /Users/richie/.ssh/id_rsa (RSA) [~] $ typeset -p SSH_AUTH_SOCK declare -x SSH_AUTH_SOCK="/tmp/launch-S4HBD6/Listeners" Whereas over ssh or in tmux I get: [~] $ echo $SSH_AUTH_SOCK [~] $ ssh-add -l Could not open a connection to your authentication agent. [~] $ typeset -p SSH_AUTH_SOCK bash: typeset: SSH_AUTH_SOCK: not found echo $SSH_AGENT_PID returns nothing whatever shell I run it from.

  Read the article

• Collision planes confusion

  - by Jeffrey

  I'm following this tutorial by thecplusplusguy and in the linked video he explain that for example for the world basement and walls we need to create the actual rendered (shown to the player) walls and then duplicate them, place them in the same coordinates as the rendered walls and call them collision (by defining their material to collision). Then it defines in the Object loader function that those objects with material == collision are collision planes and should not be rendered but just used to check collision. Now I'm pretty confused. Why would we add this kind of complexity to a problem that can easily be solved by a simple loadObject(string plane_object, bool check_collision);: Creating only the walls object (by loading .obj file in plane_object) Define them also as collision planes whenever the check_collision is set to true In this case we have lowered the complexity of his method and make it more flexible and faster to develop (faster because we don't always have to make a copy for each plane and flexible because we don't hardcode the Object loader). The only case in which this method could not work is when we need hidden collision planes, and for that we could modify the loadObject() function like this: loadObject(string plane_object, bool check_collision = true, bool hide_object = false); Creating only the walls object (by loading .obj file in plane_object) Define them also as collision planes whenever the check_collision is set to true And add the ability to actually show the object or hide it based on hide_object. The final question is: am I right? What would the possible problem encountered with my solution versus his?

  Read the article

• my linux problems and solutions [closed]

  - by Delirium tremens

  I read somewhere in StackOverflow or StackOverflow Meta that if I had a problem, then solved it myself, I can share the problem and solution with you. How do I? in Linux: remove unneeded packages using apt-get play spc and psf update the system using apt-get in Mint: install lamp install and configure xdebug enable xdebug for cakephp install bazaar colo rename a repository directory when bazaar explorer fails init a repository when bazaar explorer fails use ssh key with launchpad uninstall firefox 3 when synaptic fails install minefield make pearltrees load when flash fails edit clojure documents install compojure create a new compojure project in Kubuntu enable phpmyadmin after installing lamp stop MySQLdb module error in webpy in Ubuntu stop the mouse pointer from disappearing fix the color stop sync read-only filesystem error stop download prompt instead of site enable phpmyadmin after installing lamp enable mod_rewrite after installing lamp

  Read the article

• FoxPro 2.6 DOS on Windows 7 64-bit

  - by Rolando

  I support a company that has a very old, mission critical, FoxPro for DOS 2.6 (FPD) application. For variuos reasons the company didn't adapt/migrate their app, which, ironically, has been running even better under Windows XP (and 32-bit Win7) because the OS allowed new features like more reliable networking, distributed printing, email integration. Unfortunately for this company, most new machines now come with a 64-bit version of Windows 7, which is incompatible with their FPD app. I know this time the writing is on the wall: the only long-term solution is to migrate their app. But I wonder if anyone can suggest a temporary alternative path, which doesn't involve either: downgrade 64-bit Windows to 32-bit, or run the app on a virtualized 32-bit XP

  Read the article

• What is a easiest way to implement Mail Server in ubuntu and hook in webmail through XAMPP?

  - by Parris

  Hi Everyone, I currently have xampp running on my ubuntu server. I tried a variety of things including installing, postfix+dovecot+roundcube+postfixadmin (postfix+dovecot work I think, postfix admin also works, roundcube works and connects to dovecot but i cant create user accounts, or figure out how that works), citadel (it installed, but I have no idea how to make it work with xampp for webmail) and i tried messing with exim and vexim a bit also. In short I feel like this should be a lot easier, and I can't figure it out haha. XAMPP works fine. I got my server running with everything. I was thinking about mercury mail, but I need a webmail solution also. I was thinking about google apps, but 50 bucks a year per user is a steep change from free. Thanks for the help!

  Read the article

• the commands ls and get of ftp are not working in vmware

  - by mnish

  Hi, Iam using vmware player version 3.1 to boot a minix 3 os image. After booting the minix os I want to get some files from a server using ftp. the ftp connection to the server works but when i use the commands "ls" or "get" nothing happens except it says "200 PORT command successful" and it hanges in there. The only thing i can do after typing ls+enter or get+enter is to exit the ftp by using ctrl+c. If anyone knows a solution to this? please help. Thank you

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• Remote Desktop fails with no error

  - by Duane

  Recently, I've been having problems connecting to a remote machine via RDP. I can connect fine exactly once, but all subsequent attempts fail until the remote machine is rebooted. I seem to authenticate properly, but the RDP logon dialog disappears after showing, "Configuring remote session..." for a few seconds. No errors or other useful info is written either to my screen or the Event Logs of the two machines involved. I've tried disabling remote sound as others have suggested, with no success. I'm still investigating a solution, but would appreciate any thoughts. Fortunately, I can reboot the box remotely w/o causing any problems, but this is a less than ideal workaround.

  Read the article

• VLC without chrome in Windows

  - by timberwo7ves

  I'm trying to run VLC (2.1, 64 bit) without any chrome on Windows 7. You can achieve it by going to Preferences, and in the Interface tab, unchecking Integrate video in interface, and also in the Video tab, unchecking Window decorations. The problem lies in the fact that without Window decorations there is no apparent way to move or resize the video window - in GOM player, for example, you can move window by dragging on the video itself; is there an option for this in VLC? Ideally, I would like to move the window by the method described above (by dragging the video), and would like the Window decorations to reappear on mouseover, to allow resizing; I'm a new VLC user, but unsure how far the customisation goes. - I'd settle with just the moving of the window via dragging the video if this is possible by advanced setting. There is a similar question here, but not exactly, and no solution to that particular question.

  Read the article

• Excel CSV import treating quoted strings of numbers as numeric values, not strings

  - by MichaelOryl

  I've got a web application that is exporting its data to a CSV file. Here's one example row of the CSV file in question: 28,"65154",02/21/2013 00:00,"false","0316295","8316012,8315844","MALE" Since I can't post an image, I'll have to explain the results in Excel. The "0316295" field gets turned into a number and the leading 0 goes away. The "8316012,8315844" gets interpreted as one single number: 83,160,128,315,844. That is, most obviously, not the intended result. I've seen people recommend a leading single quote for such cases, but that doesn't really work either. 28,"65154",02/21/2013 00:00,"false","'0316295","'8316012,8315844","MALE" The single quote is visible at all times in the cell in Excel, though if I enter a number with a leading single quote myself, it shows just the intended string and not the single quote with the string. Importing is not the same as typing, it seems. Anybody have a solution here?

  Read the article

• Player sprite moving slower on iPhone 4

  - by nvillec

  I just finished getting movement/jump animation for a player sprite in Xcode using Cocos2D. The basic movement algorithm is a timer that updates every 0.01 sec, changing the sprite position to (sprite.position.x + xVel, sprite.position.y + yVel). Each time a movement button is tapped, the appropriate velocity (initialized to 0) is changed to whatever speed I choose, then a stop movement button returns the velocity to 0. It's not an ideal solution but I'm very new at this and stoked to at least have that working with little help from the internet. So I may not have explained that perfectly, but it is in fact working to my satisfaction in Xcode's iPhone Simulator, however when I build it for my device and run it on my phone, the sprite's movement speed is noticeably slower than in Xcode. At first I thought it must have to do with the resolution of the iPhone 4, making the sprite's movement path twice as long, but I found that if I pull up the multitask bar, then return to the app the speed will sometimes jump back to normal. My second theory was that the code is just inefficient and is bogging the processes down, but I would see this reflected in the frame rate wouldn't I? It stays at 59-60 the whole time, and the spritesheet animation runs at the correct speed. Has anyone experienced this? Is this a really obvious issue that I'm completely missing? Any help (or tips for optimizing my approach to movement) would be much appreciated!

  Read the article

• Is there software that will help me convert my PST files into a searachable web archive?

  - by chronoz

  I have used POP3 for many and many years and always used PST files for back-up purposes. I'd like to be able to create a searchable mail archive of this 12GB worth of e-mail. I had used Horde + Qmail for a while for searching e-mail, but it was truly horrible and even extremely slow when searching into a few ten thousands of e-mails, let alone more than a million. I would prefer a free solution that would provide fast searching through historical e-mails. Also, preferably hosted on a server, so I don't have to worry about backing up any more crucial data on my desktop.

  Read the article

• How to proxy and encrypt all my internet traffic with Win7 and Win2008R2?

  - by Malartre

  Hi, I have a Windows 7 laptop and a Windows 2008 R2 server. How can I encrypt and route all my internet request from the Win7 laptop to the Win2008R2 server? I guess the server would be called a proxy? Goal is to prevent unencrypted network snooping. I found this article about using SSH, but I would prefer an official windows integrated solution. What's the Microsoft "way" on this? http://lifehacker.com/237227/geek-to-live--encrypt-your-web-browsing-session-with-an-ssh-socks-proxy I would like this to work for all internet traffic, not just browser traffic and I would like to set this up on many Win7 clients. Carl

  Read the article

• System Restore Points

  - by Ross Lordon

  Currently I am investigating how to schedule an automatic initiation of a system restore point for all of the workstations in my office. It seems that Task Scheduler already has some nice defaults (screenshots below). Even the history for this task verifies that it is running successfully. However, when I go to Recovery in the Control Panel it only lists the System Restore Points one for every previous for only 3 weeks back even if I check the show more restore points box. Why don't the additional ones appear? Would there be a better way to implement a solution, like via group policy or a script? Is there any documentation on this online? I've been having a hard time tracking anything down except how to subvert group policy disabling this feature.

  Read the article

• How can I copy the output from a remote command into the local clipboard?

  - by cwd

  I use iTerm2 as my terminal client in Mac OS X. On the local system I can use pbcopy and pbpaste to transfer data between the system clipboard and the terminal, but of course this doesn't work when you're ssh'ed to another machine. Is there some way which I can take the result of a command and copy it to the clipboard automatically? Perhaps an applescript to grab the text on the iTerm windows, then get the next to last line? For instance, if I wanted to copy the current working directory: I run pwd, then use the mouse to select the text, and then press command + c. Is there any better / faster / automatic way of doing this? I'm not looking for a bulletproof solution that would work for every command (eg: might not work when there is a huge scrollback) - I'm just looking for something to make this task that I do quite often a little less tedious. Update I'm looking into using screen to do this, but I'm still not sure if it is possible.

  Read the article

• A Huge Opportunity in Small Things

  - by Tori Wieldt

  Addressing the strong demand for Java in the embedded market, Oracle is hosting a new Java Embedded @ JavaOne event in San Francisco October 3-4. The event allows decision makers to attend the Java Embedded @ JavaOne business-focused program, while their IT/development staff can attend the technically-focused JavaOne conference. [Obligatory comment about suits & ties vs. jeans & T-shirts removed.] The two-day event includes keynotes, sessions and demonstrations. In his keynote this morning, Judson Althoff, Senior Vice President of Worldwide Alliances and Channels and Embedded Sales, Oracle explained  Devices are all around us - on 24x7, connected all the time. The explosion of devices is the next IT revolution. Java is the right solution for this space. Java embedded solutions provide a framework to  provision, manage, and secure devices.  Java embedded solutions also provide the ability to aggregate, process and analyze multitude of data.  Java is one platform to program them all. Terrance Barr, Java Evangelist and Java ME expert is enthusiastic about the huge opportunity, "It's the right time and right place for Java Embedded," he said, "Oracle is looking for partners who want to take advantage of this next wave in IT." The Embedded space continues to heat up. Today, Cinterion launched the EHS5, an ultra compact, high-speed M2M communication module providing secure wireless connectivity for a wide variety of industrial applications. Last week, Oracle announced Oracle Java ME Embedded 3.2, a complete client Java runtime Optimized for resource-constrained, connected, embedded systems, Oracle Java Wireless Client 3.2, Oracle Java ME Software Development Kit (SDK) 3.2, and Oracle Java Embedded Suite 7.0 for larger embedded devices. There is a huge opportunity in small things. 

  Read the article

• SSL certificates with password encrypted key at hosting provider

  - by Jurian Sluiman

  We are a software company and offer hosting to our clients. We have a VPS at a large Dutch datacenter. For some of the applications, we need an SSL certificate which we'd like to encrypt with a password protected keyfile. Our VPS reboots now and then because of updates whatsoever, but that means our apache doesn't start right away because the passwords are needed. This results in downtime and is of course a real big problem. We can give the passwords to our VPS datacenter, or create certificates based on keyfiles without passwords. Both solutions seem not the best one, because they compromise the security of our certificates. What's the best solution for this issue?

  Read the article

• Linux script to find time difference and send an email if need

  - by Gnanam

  Hi, I'm not an expert in writing shell scripts but also I'm looking for a very specific solution. OS: CentOS release 5.2 (Final) I've a Java standalone which keeps writing (all System.out.println) to a log file. For some unknown reason, this Java standalone stops working at some point of time in my server and eventually logs writing also stops working. I want to have a script which checks the last modified date & time of the log file with current date & time in the server. If the time difference exceeds more than 5 minutes, I want to send an email immediately to my recipients list. This way I'll come to know when this Java standalone has stopped working. I'll move this script to crontab and make it run for every 1 minute, so that this whole process is automated. Log file location: /usr/local/logs/standalone.log

  Read the article

• Secunia Personal Software Inspector (PSI) 2.0

  - by TATWORTH

  Secunia Personal Software Inspector is now available in a updated version that is free for personnal use. The home page says "The Secunia PSI is aFREE security tool designed to detectvulnerable andout-dated programs and plug-ins which expose your PC to attacks. Attacks exploiting vulnerable programs and plug-ins are rarely blocked by traditional anti-virus and are therefore increasingly "popular" among criminals. The only solution to block these kind of attacks is to apply security updates, commonly referred to as patches. Patches are offered free-of-charge by most software vendors, however, finding all these patches is a tedious and time consuming task. Secunia PSI automates this and alerts you when your programs and plug-ins require updating to stay secure. Download the Secunia PSI now and secure your PC today - free-of-charge." I have used this for some time on my home PC and have found it to be very useful in identifying required updates. I use Google Chrome but I found that whenever a new version is issued, the old version is not de-installed. Secunia PSI helps me to locate them and get rid of them.

  Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >