Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 519/791 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• OpenVZ multiple networks on CTs

  - by picca

  I have Hardware Node (HN) which has 2 physical interfaces (eth0, eth1). I'm playing with OpenVZ and want to let my containers (CTs) have access to both of those interfaces. I'm using basic configuration - venet. CTs are fine to access eth0 (public interface). But I can't get CTs to get access to eth1 (private network). I tried: # on HN vzctl set 101 --ipadd 192.168.1.101 --save vzctl enter 101 ping 192.168.1.2 # no response here ifconfig # on CT returns lo (127.0.0.1), venet0 (127.0.0.1), venet0:0 (95.168.xxx.xxx), venet0:1 (192.168.1.101) I believe that the main problem is that all packets flows through eth0 on HN (figured out using tcpdump). So the problem might be in routes on HN. Or is my logic here all wrong? I just need access to both interfaces (networks) on HN from CTs. Nothing complicated.

  Read the article

• Proxy Appliance

  - by Kumar

  I'm looking for a way to set-up a web proxy at home. Hopefully there's a solution I can use to do this. Alternatively, do you have any ideas for setting up one at home using a proxy with an auto updating list? UPDATE - AutoUpdating list so the new sites are categorized and downloaded and the filtering is done by category instead of per site e.g. peerblock works this way Appliance as in a small dedicated hardware or device to perform this task, like WD TV live or Acer Aspire Revo with the media center edition I'd be ok with setting up Squid / Linux / SquidGuard even if i'm not familiar with *nix but ideally a small form factor pc with dual nic's would be ideal so it can be out of sight for the most part !

  Read the article

• Links to detailed instructions on building a DIY NAS

  - by Kaushik Gopal

  I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

  Read the article

• pfSense + DDoS Protection

  - by Jeremy

  I run a gaming community on a colo with a 100Mbps port. I want to buy a very cheap 35 dollar server with the same 100Mbps port, and run pfSense to use as a hardware firewall. I'm dealing with a bunch of 14 year old kids that have access to botnets, so it can become a bit necessary to get something like this. My overall question, is using pfSense on a cheap identical datacenter/port speed server worth it to actually block DDoS attacks? A bit more into detail since I assume you will ask this, the attacks we receive are normally around 1Gbps. We currently run CentOS using CSF Firewall, and even when using a software firewall, we block 500Mbps UDP floods, or just generic attacks pretty easily. Thanks, - Necro

  Read the article

• MaxClients in apache. How to know the size of my proccess?

  - by Larry

  From http://httpd.apache.org/docs/2.2/misc/perf-tuning.html The single biggest hardware issue affecting webserver performance is RAM. A webserver should never ever have to swap, as swapping increases the latency of each request beyond a point that users consider "fast enough". This causes users to hit stop and reload, further increasing the load. You can, and should, control the MaxClients setting so that your server does not spawn so many children it starts swapping. This procedure for doing this is simple: determine the size of your average Apache process, by looking at your process list via a tool such as top, and divide this into your total available memory, leaving some room for other processes. The main issue is that I can't understand how to know the size, because, well i have the size of httpd on no more of 3888 But, if we need to determine the number for MaxClients, and I have 4GB of RAM, so I get: 972, so I should use like 900 in the MaxClients?

  Read the article

• Tutorial for Quick Look Generator for Mac

  - by vgm64

  I've checked out Apple's Quick Look Programming Guide: Introduction to Quick Look page in the Mac Dev Center, but as a more of a science programmer rather than an Apple programmer, it is a little over my head (but I could get through it in a weekend if I bash my head against it long enough). Does anyone know of a good basic Quick Look Generators tutorial that is simple enough for someone with only very modest experience with Xcode? For those that are curious, I have a filetype called .evt that has an xml header and then binary info after the header. I'm trying to write a generator to display the xml header. There's no application bundle that it belongs to. Thanks!

  Read the article

• Ubuntu server failing daily

  - by deanvz

  Symptoms: Server becomes unresponsive - Increase in load, all services stop Loss of connectivity - Ping/SSH Flush MySQL hosts after reboot - As MySQL refuses new connections Intermittent Apache crashes Generally happens early morning hours - 2 days of the week are however excluded Changes made: Updated the OS - to Ubuntu 10.04.4 LTS Not sure if the MySQL server was also updated in the process Current MySQL version - mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (x86_64) using readline 6.1 Updated Plesk from 10.4.4 Update #47 to 11.0.9 Update #23 Rebooted on almost daily basis All crons stopped for the times corresponding to the server crashes Created a MySQL log to monitor the lock times on queries Possible causes: Failing hardware Incorrect software configuration (MySQL, Apache etc) Responsibilities: Small webserver Runs our billing system - WHMCS Responsible for CRONs Bulk-email solution - No delivery times coincide with server crashes Proposed solutions: Move machine over to VM Format and restore the Plesk server backup and take it from there? Side notes: Seems to be a general Apache failure across all our linux servers - Intermittent problem Are we doing something fundamentally wrong in the Apache config? (I understand that this is a secondary question, just making sure that it isnt possibly holding any relevance)

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by user27977

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• Virtual system drive is split between separate LUNs

  - by Tigran

  My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

  Read the article

• Is there any *good* HTML-mode for emacs?

  - by Carson Myers

  I love emacs, and I want to do my web-programming work in it, but I can't find a way to get it to edit HTML properly. I mean it's seriously awful. It will do HTML fine, but not PHP, javascript, etc. I tried getting html-helper-mode... I downloaded it, put it in /usr/local/share/emacs/site-lisp, and added it to my .emacs file: (autoload 'html-helper-mode "html-helper-mode" "Yay HTML" t) (setq auto-mode-alist (cons '("\\.html$" . html-helper-mode) auto-mode-alist)) copied and pasted from some site (I don't know elisp). it just, doesn't highlight anything at all. I tried downloading a whole bunch of modes and using some other mode to string them together, to no avail. Emacs is so great in every other way--why can't it do the simple task of editing web pages? I mean, it's a pretty standard thing to do for editors these days. So, does anyone know how to do this?

  Read the article

• MySQL-5.5.10 - Lost connection to MySQL server during query (Both Web Clients and MySQL Slaves)

  - by kwiksand

  We've just upgraded our existing MySQL5.1 DB servers to newer (much better) hardware with MySQL 5.5, and things have been going mostly smoothly for almost 6 weeks. Just the last few days, I've noticed a few errors, such as: From a MySQL Slave: [ERROR] Error reading packet from server: Lost connection to MySQL server during query ( server_errno=2013) Or From Apache/Other: Lost connection to MySQL server at 'reading initial communication packet', system error: 110 At one point this evening, many webnodes reported this error for a three minute period (many such reports as this was in a busy period). However, the issues don't appear to correspond with any times of extreme load. For all intents and purposes, the connection/thread load on MySQL is at a normal rate (between about 10 and 40 connected threads), and Web load has been a LOT higher at times over the last few weeks. Could there bee other reasons for these connection errors, that I'm not seeing?

  Read the article

• How do partitions help in optimizing the harddrive?

  - by Fasih Khatib

  I was recently reading a guide on Tom's Hardware about how to optimize the harddrive. They listed creating partitions as one of them. They said keeping the various files seperate is a good idea as it reduces the read/write cycles required. Now my querry is: what size partitions do i make for my 500gb harddrive. Its completely blank. I will be installing WIN7 in it. My usual strategy is to divide it into two equal partitions. Is it the optimum size?

  Read the article

• OS X Snow Leopard fails to boot after upgrade to 10.6.1

  - by pixeline

  I'm a fairly recent mac user. Been using windows for decades and happily switched. But i upgraded from 10.6 to 10.6.1 last night and the upgrade looks like it failed. I restarted the machine when it asked to then went to bed. In the morning the computer was still trying to shut itself off. So i forced the shutdown, restarted, but now i'm stuck with the loading spinner. What can i do? UPDATE: Verbose didn't show anything interesting. i also did the hardware test. Nothing comes up wrong. Disk utility did not find any error on the HD. But, it did show a fatal error when checking permissions.

  Read the article

• Where do I find a color profile for my MacBook Pro display?

  - by Jesse

  I installed Windows 7 on my MacBook Pro, overwriting OSX Lion. The screen has a blue tint due to lack of a calibrated color profile. I once used the "Color LCD" ICC profile from the OSX partition and it worked great, but I've since lost it since I decided to overwrite OSX completely. I tried the manual calibration in Windows 7 but I just can't seem to get it right like it was while using the color profile that was on the OSX partition. All Google tells me is where to find the ICC profile in OSX, and to copy it over. Do I have to reinstall OSX just for the color profile? Even if I do, where does the profile actually come from? Is it on the OSX disk, or is it somehow retrieved from the hardware itself? Is there a way to get it without reinstalling OSX? Thanks!

  Read the article

• Wake network adapter from deep sleep mode

  - by BeatMe

  I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• Looking for FTP server that allows user management from database

  - by hughesdan

  I'm planning a server application that will handle files uploaded via FTP. The application must parse text documents that it receives and write them to a database (most likely a document-oriented database like Mongo). And the application must also relay all large binary files it receives to Amazon S3 for storage and hosting. I'd like to manage all aspects of the FTP server programmatically. For example, when a user registers via a web page the application should be able to create the user account in the database and provision a directory on the server for receiving files. I'm using a Linux server but am otherwise open to considering any programming language or framework. I experimented with VSFTPD but didn't like the way the application relies on config files and the creation of users and directories via the command line. Can someone please recommend what server framework I should consider? I'm a little biased toward solutions that leverage Javascript/Nodejs or Python. However, I'm open to anything that can run on a Linux box.

  Read the article

• How to watch 3D on Acer "3D Ready" projector?

  - by glenneroo

  We have here a Acer P1200 DLP projector which is "3D Ready" (using the BrilliantColor™ DarkChip™ 3) and documentation was not included in the packaging. We don't have a Blu-ray player and have no intention of purchasing one in the near future so I'm looking for a way to view encoded or streamed content. My question is: How is it possible to watch 3D content? What extra hardware/software will I need? EDIT: Found this information in the user manual: DLP 3D function: Choose while using DLP 3D glasses, quad buffer (NVIDIA/ATI…) graphic card and HQFS format file or DVD with corresponding SW player. 3D Sync L/R: If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). ...but I'm still at a loss. What is a quad buffer graphics card?

  Read the article

• Cannot import video from a DV camcorder over FireWire

  - by qbeuek

  I have a JVC GR-D320 miniDV camcorder that has a FireWire interface. I recently upgraded to Windows 7 RTM (64 bit, fresh installation). When I connect my camcorder through FireWire, I can see it in Device Manager without any warnings or problems, but I cannot capture videos from my miniDV tapes. After connecting, AutoPlay displays "Import Video could not find a compatible digital video device. Verify that the digital video device is properly connected and turned on." When using Windows Live Photo Gallery after selecting the import option, my camera is not listed. The camera used to work perfectly on the same hardware before upgrading to Windows 7 RTM 64 bit (it used to work fine on Windows XP SP3 32 bit). Googleing revealed that people had the exact same problems in Vista, but no solution was provided. Any help?

  Read the article

• How much processor speed and cores do I need for these tasks?

  - by ajay

  I am planning to buy a new laptop as I find my current one very slow. My question here is specifically related to RAM size and CPU power. I will mostly be doing development (not much games). I would be dabbling in distributed computing, multithreaded and data intensive parallelizable tasks on multi-cores. For e.g. I would want to be able to Concurrent programming in Scala/Java/Clojure etc. and be able to see parallelization. Furthermore, I would want the RAM to be enough. But from a developer machine standpoint, do you think 4GB RAM and 2.53GHz Dual Core processor would be enough. I'm basically looking at this model: http://store.apple.com/us/configure/MC118LL/A?mco=MTM3NDcyODk (link dead)

  Read the article

• GNU/Linux: SAS-disk detected as /dev/sg7 - not as /dev/sdb

  - by Ole Tange

  I have just installed a SAS disk into a Debian server. It was detected correctly and everything was fine. Then I moved the SAS disk to a different Debian server, the same hardware model and running same version of Debian, but here the SAS disk is detected as /dev/sg7 and not /dev/sdb. smartctl -a /dev/sg7 works fine, but fdisk and cat hang. I tried putting the SAS disk in another slot: Same problem. How can I force the SAS disk to be detected as /dev/sdb? # uname -a Linux maxwell 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• Open Source project that does SSL Inspection

  - by specs

  I've been assigned to research out and spec replacing our old and decrepit http content filtering system. There are several open source filtering packages available but I've not come across one that does SSL inspection. The new system will scale to many branches of different sizes, from say 10 users to a few hundred, so purchasing an appliance for each branch isn't desirable. When we're further along, we will do custom programming as we have a few unique needs in other aspects of filtering, so if the suggestion takes a bit of customization, it won't be a problem.

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• SQL 2008 Mirroring, how to failover from the mirror database?

  - by Luis

  I have configured a database mirroring setup in SQL 2008 using the High-safety, Synchronous mode, without automatic failover. I don't have a Witness instance. Regarding high availability, I understand Mirroring is a better strategy than Log Shipping (faster and smoother failover), and cheaper than Clustering (because of license and hardware costs). According to the MS docs, to do the failover you need to access to the Principal database and in the "Mirror" options click the "Failover" button. But I want to do this from the Mirror database, because what would be the benefit as all this setup is being done in case the Principal server knocks down? Evidently I am missing something. If Mirroring is not a solution for server downtime (as would be Clustering, if I understand correctly), then which practical (i.e. real world examples) cases would benefit from Mirroring for high-availability purposes? Thank you very much for your response! I really need some enlightment.

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >