Search Results

Search found 21942 results on 878 pages for 'internet friend'.

Page 519/878 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• Redirect specific domains with DNS

  - by user66377

  Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

  Read the article

• Our Server Rooted but exploit doesnt work?

  - by Salina Odelva

  Hi everyone. My friend's hosting server got rooted and we have traced some of attacker's commands.. We've found some exploits under /tmp/.idc directory.. We've disconnected the server and are now testing some local kernel exploits that the attacker tried on our server. Here is our kernel version: 2.4.21-4.ELsmp #1 SMP We think that he got root access by the modified uselib() local root exploit but the exploit doesn't work! loki@danaria {/tmp}# ./mail -l ./lib [+] SLAB cleanup child 1 VMAs 32768 The exploit hangs like this.. I've waited over 5 minutes but nothing has happened. I've also tried other exploits but they didn't work.. Any ideas? or experimentations with this exploit? Because we need to find the issue and patch our kernel but we can't understand how he used this exploit to get root... Thanks

  Read the article

• How do I change my gnome Ubuntu key-binding work as emacs?

  - by Douglas

  , Hello, everyone How can I change editing key-binding in Gnome on Ubuntu, and make it work like Emacs? Eg. When I'm chat with my friend, and I want to use Ctrl-a Ctrl-k to move my cursor go to the left of current line, and then cut current line, as OSX or Emacs. By default in Gnome Ubuntu, Ctrl-a is for "select all" and ctrl-k for nothing. Where does this key binding define? And how can I change this? I tried gnome-keybinding-properties and gsettings, find nothing. Maybe I have to compile something?

  Read the article

• How to setup Mac server to use two gateways

  - by Brady

  I recently asked this question: How to set Mac server to use different Gateway for internet bound traffic The answer given works but has presented me with another issue that I didnt make clear in that question. Here is my network layout as it stands: At the moment outside staff members use some services on the existing internet 1 link. Those services are hosted by the Mac server. If I change the gateway of the Mac server to the second modem those outside staff lose visabilty on those services. Now I dont know how to go about solving this issue. I want the second link to be used when the Mac server goes to rsync data offsite but everything else use link one. How do I do this? Thanks Scott EDIT: This has been resolved by setting the default gateway on the Mac server to 192.168.1.254 Thus leaving everything on the network as it was before. but to get the Mac server to use the other link for rsync I've added a route to the Mac server to route traffic to the rsync server through the second gateway. sudo route add -net {server IP's}/{Netmask} 192.168.1.1 I've awarded the answer to gravyface for pointing me to a post on how to make this route persistant in Mac

  Read the article

• Camera Canon pal DC95 not being able to get cd contents

  - by antoniocs

  Hey! A friend of mine recorded a family event with his Canon pal DC95. This camera records to a mini cd. I saw the cd being played in the camera (which was hooked up to a tv) but when I place the cd's in my pcs cd player I see nothing. Like if the cd had nothing on it. I tried downloading the manual of the camera (maybe I have to do something to the cd) but I can't find it online. I really want to get the videos on the cd so I can pass them to some other friends. Anyone know how I can achieve this? Please help me out :) Thanks. PS: Just a reminder. I know that the cd's contain stuff, but when I place the cd in the drive I just see a blank cd.

  Read the article

• Why won't dhclient use the static IP I'm telling it to request?

  - by mike

  Here's my /etc/dhcp3/dhclient.conf: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, netbios-name-servers, netbios-scope, interface-mtu; timeout 60; reject 192.168.1.27; alias { interface "eth0"; fixed-address 192.168.1.222; } lease { interface "eth0"; fixed-address 192.168.1.222; option subnet-mask 255.255.255.0; option broadcast-address 255.255.255.255; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; } When I run "dhclient eth0", I get this: There is already a pid file /var/run/dhclient.pid with pid 6511 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:1c:25:97:82:20 Sending on LPF/eth0/00:1c:25:97:82:20 Sending on Socket/fallback DHCPREQUEST of 192.168.1.27 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.27 from 192.168.1.254 bound to 192.168.1.27 -- renewal in 1468 seconds. I used strace to make sure that dhclient really is reading that conf file. Why isn't it paying attention to my "reject 192.168.1.27" and "fixed-address 192.168.1.222" lines?

  Read the article

• Cisco Catalyst 3550 + Alteon 184 Load-Balancing Issues...

  - by upkels

  I have just deployed a couple Cisco Catalyst 3550 switches, and a couple Alteon 184 Web Switches for load-balancing. I can ping all RIPs and VIPs to/from the Alteon. Topology Before: (server) <- (Alteon) <- (Internet) Topology Now: (server) <- (3550) <- Alteon <- (Internet) Cisco Port Configuration (Alteon Uplink Port): description LB_1_PORT_9_PRIMARY switchport access vlan 10 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 9 Configuration (VLAN 10 WAN): >> Main# /c/port 9/cur Current Port 9 configuration: enabled pref fast, backup gig, PVID 10, BW Contract 1024 name UPLINK >> Main# /c/port 9/fast/cur Current Port 9 Fast link configuration: speed 100, mode full duplex, fctl none, auto off Cisco Configuration (Load-Balanced Servers Port): description LB_1_PORT_1_PRIMARY switchport access vlan 30 switchport mode access switchport nonegotiate speed 100 duplex full Alteon Port 1 Configuration (VLAN 30 LOAD-BALANCED LAN): >> Main# /c/port 1/cur Current Port 1 configuration: enabled pref fast, backup gig, PVID 30, BW Contract 1024 name LB_PORT_1 >> Main# /c/port 1/fast/cur Current Port 1 Fast link configuration: speed 100, mode full duplex, fctl both, auto on Each of my servers are on vlan 10 and 30, properly communicating. I have tried to turn on VLAN tagging on the Alteon, however it seems to cause all communications to stop working. When I tcpdump -i vlan30 on any of the webservers, I see normal ARP communications, and some STP communications, which may or may not be part of the problem: ... 15:00:51.035882 STP 802.1d, Config, Flags [none], bridge-id 801e.00:11:5c:62:fe:80.8041, length 42 15:00:51.493154 IP 10.1.1.254.33923 > 10.1.1.1.http: Flags [S], seq 707324510, win 8760, options [mss 1460], length 0 15:00:51.493336 IP 10.1.1.1.http > 10.1.1.254.33923: Flags [S.], seq 3981707623, ack 707324511, win 65535, options [mss 1460], len gth 0 15:00:51.493778 ARP, Request who-has 10.1.3.1 tell 10.1.3.254, length 46 etc... I'm not sure if I've provided enough information, so please let me know if any more is necessary. Thank you!

  Read the article

• Is encryption really needed for having network security? [closed]

  - by Cawas

  I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. So, what do you think?

  Read the article

• Network bridge does not work on Windows 7

  - by D. Strout

  I am trying to use Windows 7 to bridge my wireless and wired connections together to get wireless on a second Windows XP computer (fresh install). The network bridge is created successfully, but when I connect the cable from the first computer with the bridged connections to the second one with just a wired connection, nothing happens. The second computer doesn't connect, and the first computer shows no sign of anything different. I tried bridging the connections of a third computer, and connecting this computer to the second computer. This worked (third computer bridged the wireless to the second computer). Thus, the problem must be with the first (Win 7) computer. However, I have no idea what the problem could be. All Internet Connection Sharing is turned off. Homegroup is disabled (it was originally enabled, I thought that might be a problem, so I disabled it). Also, I had VMWare fusion installed, and that created extra items in the "This connection uses the following items" box in the properties dialog. Thinking this might be causing issues, I uninstalled that too. Still, with everything I tried, I can't get it to work. Any suggestions? Edit: Another thing I noticed that might be worth mentioning: The network icon in the Win7 taskbar has a red X on it that means it's not connected, but when I click the icon, it says connected next to my wireless connection, and I am able to access the internet.

  Read the article

• windows clients cannot get dns resolution until you open and close ipv4 properties page

  - by GC78

  This strange problem has started recently. Some windows clients cannot seem to get dns resolution to the internet after boot, and sometimes again at some point in the day. Internal hosts are also slow to resolve. trying to ping an interal host by name will take a long time for the hostname to resolve to ip address and trying to ping a website by name will fail to resolve. If you go into the tcp/ip v4 properties and view but not change anything, ok/close out of that then the client starts working fine, hostnames will resolve quickly. I have seen this happen on both Vista and W7 clients. ipconfig /all at a client experiencing this problem shows everything in order. proper ip addr, gateway, dns server, dns suffix ect.. ipconfig /dnsflush will not fix them, neither will /release and /renew the clients get their ip address, mask and dns server info from either one of 2 OES dhcp servers that assign addresses in different scopes in the same subnet. the internal dns server is a different OES dns server the default gateway is not assigned by the OES server but is statically put in at the client (only for those who need to get to the Internet for their job) flat network topology What can I do to get to the bottom of this? It only happens to a few of the client machines and typically the same ones. It started happening when we made a change to one of the DHCP scopes in iManager. Strangly this problem only happens to clients that get an IP address from the scope that we didn't make any changes to.

  Read the article

• My Macbook Pro doesn't give any reaction when pressing the power button

  - by Juri

  An hour ago I closed the display my Macbook Pro. it goes into sleep mode. After dinner I returned, opened the display and wanted to continue with my work, but I recognized it was switched off completely. I tried to press the power button and received nothing. I also noticed that the green light on the power supply plug which is plugged into my Macbook is off. Same thing with a power supply from the Mac of a friend of mine. What could I try? Some suggestions? What could be the problem here?? I already tried using the battery to start, no success, also taking the battery out completely, no success. Even if I press the small button for showing the current battery charge, none of the leds starts. It's like the Mac is completely dead.

  Read the article

• Setting "Run WWW service in IIS 5.0 isolation mode" does not persist in IIS 6

  - by Saul Dolgin

  Our IIS server was recently patched with the latest Microsoft Security Updates and since then, I am unable to enable the "Run WWW service in IIS 5.0 isolation mode" setting. This setting was enabled prior to patching and somehow changed during the updates. I have tried both using the IIS Manager console and the adsutil.vbs approach to change it. Either way, after resetting IIS for the change to take effect, when I go to verify that the isolation mode setting is enabled (true) I find that is reverts back to being disabled (false). Now... The patches have already been rolled back, however the setting still does not persist when I enable it. While I am trying to research the patches that were applied to see if there is a known issue (or perhaps a change in this setting's behavior) I was hoping someone else might have come across the same problem. Any help towards a workaround would be greatly appreciated! >cscript adsutil.vbs set W3SVC/IIs5IsolationModeEnabled TRUE IIs5IsolationModeEnabled : (BOOLEAN) True >iisreset Attempting stop... Internet services successfully stopped Attempting start... Internet services successfully restarted >cscript adsutil.vbs get W3SVC/IIs5IsolationModeEnabled IIs5IsolationModeEnabled : (BOOLEAN) False

  Read the article

• MX record configuration for hosted email?

  - by Paul Sanwald

  I am helping a friend with his website, and am having a problem with his webmail configuration, which I suspect is due to a misconfigured MX record. His domain is registered and hosted by hostmonster, they have a webmail option. A record: Host Points To TTL webmail 12.345.789.101 14400 CNAME: mail webmail.d.com 14400 MX Record: 0 @ mail.d.com 14400 I've created an email account on hostmonster, [email protected]: however, when I sent an email to this account, it appears to be routing to /dev/null. I know that it's not actually, but am unsure of the steps I can take to track this down? I've tried using dig, but am unsure where to start. How can I track down where this email is being routed to?

  Read the article

• network latency, TCP and UDP packets

  - by user115848

  Hello recently my network has started to cause me lots of problems. I have a cable modem, connected to a tp-link router (with some port forwarding). Everything was working fine then i started to get lots of udp (port 53) "UNREPLIED" logs in the router. Now there are tcp UNREPLIED logs too. This is causing lots of latency and failed connections when trying to connect to different internet sites. Also, we run an openfire server for spark connections, and I believe its causing connectivity issues for some users who are trying to connect using Spark (some people connect fine, others don't). Please see screen shot below for packet logs. It has to be something internally, as I connected straight to the comcast modem and i was able to connect to the internet and various sites as normal. I tried to swap out the router with a different and got the same issue. I scanned both my internal dns servers for viruses or malware and it came up empty. Another anomaly is that when i try to connect to www.cnn.com, i get redirected to the different site. I scanned my own machine for hijacks. Not sure if this is related to the networking issue. Please let me know if you have any ideas for troubleshooting.

  Read the article

• No keyboard works

  - by Adrian Mester

  I'm trying to troubleshoot a problem a friend is having. Her keyboard suddenly stopped working. She had a wireless keyboard/mouse combo and the mouse still worked. She tried with a different usb keyboard, and it still didn't work. She tried with a PS/2 keyboard and it didn't work. She's running Windows 7, but the keyboard also doesn't work during boot-up. I've got no idea what could possibly be the problem. Any suggestions?

  Read the article

• How do i set up a fully featured small business network?

  - by JoshReedSchramm

  This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Cannot ping Google Public DNS on 8.8.8.8

  - by Tibor

  I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

  Read the article

• Re-Initialize RAID-0 in software after card failure

  - by Ben

  I'm working on a Friend's WD MyBook "1TB" HDD that is not mounting. When I got in to it, I discovered that it is really 2 500GB HDD's set up as RAID-0. It appears that the drives themselves are fine, but that the logic board has failed. My questions is this: can I re-initialize the RAID-0 using software RAID so that I can recover the data to another drive? If so, how and which software RAID would be best (Preferably open source. any platform OK).

  Read the article

• Passing all traffic through Cloudflare

  - by Nick

  I am new to Linux System Administration and I am experimenting with iptables trying to learn how to really lock down a system with them. And one thing a friend of mine recommended was that there was a way to pass all incoming traffic through Cloudflare so even if attackers resolved the server ip they still couldn't (D)dos it directly. This is exactly what they said: "Simply config your servers iptables to only allow incoming connections from CloudFlares IP ranges then set it to allow only your IP/IP range to connect on port 21 (SSH)" Could someone help me on what command I'd need to run for Ubuntu to get this effect?

  Read the article

• Building a new cluster for mathematical calculations (Win/Lin)

  - by Muhammad Farhan

  I would like to build a new cluster to perform heavy mathematical calculations in Matlab and Abaqus. One of my friend told me that distributed computing is way faster than parallel computing, which is very true after reading a bit on the internet. However, I have never clustered before. Current workstation I own: Dell Precision T5400 2 x Intel Xeon 2.5 GHz 16 GB RAM (2GB x 8) 1 x Western Digital 1TB HDD 7200 rpm 1 x nVidia Quadro FX4600 768MB GPU 1 x 870W PSU OS: Windows 7 Ultimate 64-bit 2nd WS: I can buy another WS similar configuration to the one I own I am not bothered about OS, I am willing to cluster with either Windows or Linux. However, my software are compatible with windows 64-bit only. Please help me setup a cluster. Thank you.

  Read the article

• Openfire: Closing session due to incorrect hostname

  - by cvista

  I have a fresh install on a windows sevrer 2008 box. I can connect adium to the server from a remote machine and from the admin console/sessions I can see my session. My friend can aslo connect and I can see his session. I can send an admin message out and both of us can see it in the adium clients. We can't see each other though. I also get these logs in the warn window in the log viewer: Closing session due to incorrect hostname in stream header. Host: prjatk.com. Connection: org.jivesoftware.openfire.net.SocketConnection@1b1fd9c socket: Socket[addr=/109.109.248.82,port=56258,localport=5269] session: null prjatk.com is the server - however in the server settings on the admin screen I see the computer name as the hostname - is that the issue? If so how can I change that?

  Read the article

• Connecting a network printer via a Thecus N2100 - works in Vista, not in Windows 7

  - by Jon Skeet

  I have a Lexmark E250d printer attached to a Thecus N2100 NAS. On Windows Vista I've managed to configure this using an "Internet" printer port with the URL of http://thecus:631/printers/usb-printer. I can add a printer in a similar way in Windows 7, but it never manages to print the test page. If I go to "Configure Port" in Vista, it just has "Security Options" - on Windows 7 it's asking about Raw mode vs LPR mode etc. On Vista I'm using an E250d-specific driver from Lexmark; on Windows 7 there's a Microsoft E250d driver, or a Universal PCL XL driver from Lexmark... I wouldn't expect this different to be related to the problem, but I thought I'd mention it anyway. (Lexmark doesn't have a Windows 7 E250d-specific driver as far as I can see.) Any suggestions? I was thinking of upgrading my main laptop from Vista to Windows 7, but I'd really like to get this sorted first... EDIT: If I connect to http://thecus:631/printers/usb-printer via Chrome while capturing with Wireshark, I get this response: HTTP/1.1 200 OK Date: Wed, 06 Jan 2010 16:47:23 GMT Connection: Keep-Alive Keep-Alive: timeout=60 Content-Language: C Transfer-Encoding: chunked Content-Type: text/html;charset=iso-8859-1 0 No idea what that's meant to be doing... EDIT: On further consultation, this would appear to be the Internet Printing Protocol which is layered on HTTP. Printing a test page successfully from Vista posts to that URL. Will attempt the same on Windows 7...

  Read the article

• Using "enterprise" switches in home network?

  - by Industrial

  Hi everyone, After more than 12 years working with computers, I am still way behind when it comes to networking, so please bear with me :) As of this Christmas, the number of computers in my home has increased and it's well about time to upgrade the current network hardware in order to offer LAN connection to all computers. Trying to find a cheap solution, A close friend offered me a great deal on a "enterprise-class" Switch from HP (more LAN ports than I would ever need), at the same price as what a brand new Netgear or D-link Switch with 6/8 ports would cost me in retail. Would it be common sense to get this one and start using it immediately and never again have to worry about running out of LAN connections, or am I taking on a bigger bite than what I could chew?

  Read the article

• Microsoft Windows DHCP: Steering IPv4 clients into specific scopes based on MAC

  - by Easter Sunshine

  We have visitors on our campus who bring their own laptops and devices and use our wireless and wired networks. When we receive a copyright infringement notice (typically BitTorrenting), we are required to quarantine that MAC address so that it no longer has Internet access. No matter what website it tries to visit, it is sent to a web page explaining to the user that the device has been quarantined. We have thus far implemented this in ISC DHCP on Linux. We have multiple VLANs with one or more public-IP subnets and one RFC1918 quarantine subnet each. All clients are leased IPs in the public-IP subnet(s) unless you're in a list of known bad MACs. Then, you are sent to the quarantine subnet so that your traffic is unroutable on the Internet (you are isolated by subnet only, not by VLAN). We would like to move to Windows DHCP in light of the IPAM role but I cannot figure out how to replicate this in Windows DHCP 2012 (Assign DHCP IPs for specific MAC prefixes on Windows Server 2008 R2 suggests it was not possible in 2008 R2), even while using policies. So here's what I'd like: The administrator/help desk provides and maintains a list of MAC addresses that are to be quarantined. The DHCP server places those MACs into the quarantine subnet on the respective VLAN, no matter which VLAN the client is in. I don't think reservations would work: We currently have about 300 registered bad MACs and about 12 VLANs. I don't want to make 300 x 12 reservations nor have to add 12 reservations per new MAC address. Not to mention all of the quarantine subnets are /24s. We do not have NPS/NAC. You do not have to register your MAC address get network access. We use Cisco routers/switches. Thanks.

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >