Search Results

Search found 18700 results on 748 pages for 'isolated network'.

Page 519/748 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• Best practice for assigning private IP ranges?

  - by Tauren

  Is it common practice to use certain private IP address ranges for certain purposes? I'm starting to look into setting up virtualization systems and storage servers. Each system has two NICs, one for public network access, and one for internal management and storage access. Is it common for businesses to use certain ranges for certain purposes? If so, what are these ranges and purposes? Or does everyone do it differently? I just don't want to do it completely differently from what is standard practice in order to simplify things for new hires, etc.

  Read the article

• Port forwarding for VNC on Dynalink RTA1335 not working

  - by Curyous

  I've vnc-java running on an Ubuntu box, with the IP address 192.168.1.68, using port 5800 (because port 5900 is being used for normal VNC). If I connect to 192.168.1.68:5800 using another computer on the network, I can use VNC fine. Using www.whatismyip.com, I find out what my IP address from the outside world is, and if I go directly to that, I get to access my modem/router. If I try to navigate to that IP address, with ':5800' on the end, I get a "This web page is not available." error. I have port forwarding set up in the router as follows: Application Name External Packet Internal Host IP Address Protocol Port IP Address Port VNC ALL TCP/UDP 5800 192.168.1.68 5800 What else do I need to do to get this to work?

  Read the article

• Remote desktop logs in with saved credentials when connecting from one computer but asks for username and password from another.

  - by AndrejaKo

  I have two computers on which I recently installed windows 7 64 bit. Using VPN, they connect to remote network on which there is a Windows Server 2000 SP4 computer. User is supposed to connect to server using remote desktop. I set same VPN and remote desktop settings on both computers with Windows 7. I set Remote desktop to save connection credentials on both computers, but when I connect to server form one computer, it uses saved credentials and I don't get log-in prompt on server side. On the other computer with same settings using same username and password, I get log-in prompt once the remote desktop connects to server. I even tried copying the .rdp file from the computer on which everything is working fine to the other computer, but that didn't help. Note that I'm not trying to have both computers connected at the same time. What is causing this and how do I make the other computer skip windows server 2000 log-in prompt.

  Read the article

• ISP Load Balancing with ISA 2006

  - by Bill Best

  I understand that ISA 2006 has an integrated Network Load Balancing feature. We also recently acquired a second internet line through a second service provider. I know it is possible to purchase a NLB router for using both incoming lines but this is not the route we would like to take if at all possible. Thus, is it possible to have two ISA 2006 servers each with there own external connection, Load balanced to be viewed as one gateway? My thought was to have two ISA servers each with three NICs, one external, one internal and one for cross communication. I am under the impression that this should work but was hoping someone else has had experience with it.

  Read the article

• Child Folder inheriting a permission that parent folder does not have (NTFS)

  - by just.another.programmer

  I'm reconfiguring roaming profiles on my network to use proper NTFS security settings according to this article. I have reset the following permissions on the roaming profile parent folder: CREATOR OWNER, Full Control, Subfolder and files only User group with profiles, List folder, Create folders, This folder only System, Full Control, This folder, subfolders, and files Then I select one of the actual roaming profile folders and follow these steps to fix the NTFS settings: Click Security, Advanced Uncheck "Allow inheritable permissions..." Choose "Remove..." Recheck "Allow inheritable permissions..." Click "Apply" After I choose apply, I get the following permissions listed on the roaming profile folder: Administrators (MYDOMAIN\Administrators) Full Control, This folder only CREATOR OWNER, Full Control, Subfolders and files only System, Full Control, This folder, subfolders, and files Where is the Administrators entry coming from!? There is an entry on the root of the drive for Administrators to have full control, but the Roaming Profile Parent folder is not set to inherit any permissions, and it does not have the administrators permission.

  Read the article

• Product Update Bulletin: Oracle Solaris Cluster October 2013

  - by uwes

  Announcing new qualifications and general news for the Oracle Solaris Cluster product. Hardware Qualifications Sun Server X4-2 and X4-2L servers, Sun Blade X4-2B server module with Oracle Solaris Cluster 3.3 Sun Storage 16 Gb Fibre Channel ExpressModule Universal HBA, Emulex Oracle Dual Port QDR InfiniBand Adapter M3 Software Qualifications Oracle Database 12c Real Application Cluster with Oracle Solaris Cluster 4.1 Oracle Database 11.2.0.4 single instance and RAC with Oracle Solaris Cluster 4.1 Oracle VM server for SPARC 3.1 SAP Netweaver with new kernel versions ZFS Storage Appliance Kit version 2011.1.7.0 and 2013.1.0.0 Application monitoring in Oracle VM for SPARC failover guest domain Storage Partner Update Oracle Solaris Cluster 3.3 3/13 with the HDS Enterprise Storage arrays EMC SRDF for Oracle database 12c RAC in Oracle Solaris Cluster 4.1 geo cluster configuration Oracle Solaris Cluster References Korea Enterprise Data, HDFC Securities, Dealis Fund Operations Web Updates New blog entry: Oracle Solaris 10 Brand Zone cluster Solaris Application Engineering website now includes Oracle Solaris Cluster application support information Please read the Oracle Solaris Cluster Product Update Bulletin on Oracle HW TRC for more details. (If you are not registered on Oracle HW TRC, click here ... and follow the instructions..) _____________________________________________________________________ For More Information Go To:Oracle.com Oracle Solaris Cluster page Oracle Technology Network Oracle Solaris Cluster pageOracle Solaris Cluster mos communityPartner web Oracle Solaris Cluster pageOracle Solaris Cluster Blog Solaris.us.oracle.com page

  Read the article

• Best way to use my windows box as a backup?

  - by user29336

  I put a 1.5 TB HD in my Windows 7 box and my main computer is a MBP. I have a lot of professional files/folders in a FireWire 800 external HD connected to the MBP and I want to use the 1.5 TB HD in my Windows 7 box as a backup for both the HD and MBP. Right now I am just copying files manually to the HD over the network and that's very slow and open to failure (not rsync'd.) Anyone suggest some appropriate solutions? Should I just figure out how to setup RSync on the windows box or is there a better alternative? Thanks!

  Read the article

• Not Able To Connect to Shared Resource

  - by bobber205

  We are using an older version of BartPE and are not able to connect to shared folders on our subnet. It says the network name could not be found. Connecting to the shared folder on the machine that is hosting it works fine. Any ideas on what might cause this? Thanks! Edit1: Got wireshark running and monitored traffic from the offending machine and tried to map. ZERO packets from the other machine were seen. :(

  Read the article

• Youtube video streaming slow

  - by Newbie

  When I try to stream youtube videos on my ubuntu 11.04, they don't stream smoothly. They buffer well and are choppy. Here's my Config: Laptop: Gateway NV58 Ram : 4 GB Ethernet Controller: Broadcom Corp NetLink BCM5784M Gigabit Ethernet PCIe (rev10) Let me know if you need more details. Thanks Newbie Output of "lspic": 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 04:00.0 Network controller: Intel Corporation WiFi Link 5100

  Read the article

• Are there any security concerns when using Windows' default workgroup?

  - by koiyu

  Are there any security concerns one should be aware of if you're using Windows' default workgroup as the workgroup? (Or is worrying just tinfoiling?) Should it be commonplace to rename the workgroup to something personal/unique after Windows installation? Are there any other benefits in renaming the workgroup from the default besides making it to look more describing? Ie. is renaming worth the hassle as it makes the workgroup generally less accessible? It is used in local area network after all.

  Read the article

• net use mapping not working in batch files but works in cmd

  - by Philippe

  Ok so here's the problem : I've got users using logon script in the domain (username.bat). The script simply lists 4 or 5 (net use letter: \\SERVER\directory\). However, when they open their session, the logon script doesnt work and returns system error 53 or 67 for all of them. I tried running the script after the profile has loaded and evrything is running, and it still gives me the error. I've then tried to run the same command in the cmd.exe. Everything mapped correctly. It also works fine if I map the drives using the "Tools Map network drives" utility. Is there anything that can prevent a command to work when ran in a batch-file but works correctly when typed in manually?

  Read the article

• Outlook 2003 under RHEL 5 server

  - by Kumar P

  I am using RHEL 5 server as proxy server in Local network. Under server i have few windows machines. Now i want to configure Outlook 2003 for send and receive mails in windows boxes, When i configure and test connections, It showing connection failed. In browser, internet working well. Without proxy, windows outlook - 2003 configure well in windows boxes also working well. What you think about it and How can i solve this problem ? Please give clear steps to solve.

  Read the article

• IT Audit checklist

  - by PHLiGHT

  I recently have taken on the position of a one man show for a company that is going to have an audit. The network isn't anywhere close to prepared and I have been looking for a general audit checklist since one hasn't been provided by the auditors and haven't found much good information out there. Does anyone have a nice template that will give me a good starting point. I know that this will be highly customized to the company but a starting point will be helpful to outline to management just how much work is needed. Thanks,

  Read the article

• DHCP: server behavior in a two server situation

  - by lang2

  This is a question w.r.t server behavior in the DHCP standard. I've read the RFC and it's still not clear to me. Situation is this: There are two DHCP servers on a network. My client initially get IP address from server A. At some stage, server A goes down. My poor client is sending REQUEST in RENEW and then REBIND state, with no response whatsoever. My questions is: in this situation, should server B response to the REQUEST in REBIND state, e.g. DHCPNAK? Thanks, lang2

  Read the article

• Slow old notebook Hardy => Karmic

  - by Mailo

  Hi, i have one very slow notebook from year about 2000. On the computer is running icewm with firefox (in this times chromium for testing). My question is if it's good step to upgrade the system to Karmic Koala? I can't install another OS on that. It doesn't have CD-ROM, it can't boot from flash, or network. The new wanted state is little bit faster system for browsing web and copying photos to local NAS. I don't mention hardware configuration, becouse it's real speed is really deep below the paper parameters.

  Read the article

• Unable to use Gmail in Thunderbird 3

  - by Jatin Ganhotra

  Mozilla Thunderbird v.3.1.7 I am trying to setup Gmail, but none of the settings are working. I have tried every resource: Blogs, tutorials Instructions by Google Instructions by Thunderbird Questions here But, still its not working. My settings are as follows Server Settings Server Type: IMAP Mail server Server Name: imap.gmail.com Username: [email protected] Port: 993 Default: 993 Connection Security: SSL/TLS Authentication method: Encrypted password Outgoing server (SMTP) Server Name: smtp.gmail.com Port: 587 Default: 25 Connection Security: STARTTLS Authentication method: Encrypted password Username: [email protected] IMAP is enabled in my Gmail settings. ERROR: Connection to the server [email protected] timed out. I am behind a proxy server and I have configured those settings under: Thunderbird Preferences - Advanced - Network and Disk Space - Connection Settings - Manual Proxy Configuration The proxy configuration works, as when I created a Blogs and News feeds a/c, it was working properly and fetching the feeds for me. So, Thunderbird is configured properly as per the proxy settings. Help me.

  Read the article

• Windows 7 / Media Center lock problem

  - by ICTdesk.net

  Hi, we have a Win7 with Media Center that is connected to a large screen. It displays a corporate slideshow near the coffeemachine. When the computer is started it automatically logs in and starts the slideshow. The problem is that on irregular time intervals (once a day, some days not) the slideshow stops and it switches to the login screen and shows which user is logged on. We don't know why this is happening. We first thought someone on the network was trying to open RDC connection to the machine, because it is the same sympthon like when you take over a machine by RDC with a different user, but nobody is doing that. Screensaver is disabled, energy settings "always on" Anybody ideas why this is happening?

  Read the article

• Audit Windows Server/Desktop Product Key usage

  - by neildeadman

  The company I work for has a fairly big domain of Windows Desktops and Servers. We also have standalone servers that are remote to our site but we have direct access to. We need to audit our license usage across all Windows machines (including some VMs). I have tried a few products downloaded, but the key returned is not the one used during installation. I have one product that gives the last 5 characters correctly but needs to be installed so its not really suitable. I also have tried some PowerShell scripts one of which is here Ideally I am looking for one that can be used over a network and if possible can audit Office keys too. I've just tried Jelly Bean and some other product key tools that all return BBBBB-BBBBB-BBBBB-BBBB-BBBBB as the product key.

  Read the article

• Data Networks Visualized via Light Paintings [Video]

  - by ETC

  All around you are wireless data networks: cellular networks, Wi-Fi networks, a world of wireless communication. Check out this awesome video of network signals mapped over a cityscape. What would happen if you made a device that allowed you to map signal strength onto film? In the following video electronics tinkerers craft an LED meter and use it to paint onto long exposure photographs with phenomenal results. Immaterials: light painting Wi-Fi [via Make] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron Is the Forcefield Really On or Not? [Star Wars Parody Video] Google Updates Picasa Web Albums; Emphasis on Sharing and Showcasing Uwall.tv Turns YouTube into a Video Jukebox Early Morning Sunrise at the Beach Wallpaper Data Networks Visualized via Light Paintings [Video]

  Read the article

• Database Schema Usage

  - by CrazyHorse

  I have a question regarding the appropriate use of SQL Server database schemas and was hoping that some database gurus might be able to offer some guidance around best practice. Just to give a bit of background, my team has recently shrunk to 2 people and we have just been merged with another 6 person team. My team had set up a SQL Server environment running off a desktop backing up to another desktop (and nightly to the network), whilst the new team has a formal SQL Server environment, running on a dedicated server, with backups and maintenance all handled by a dedicated team. So far it's good news for my team. Now to the query. My team designed all our tables to belong to a 3-letter schema name (e.g. User = USR, General = GEN, Account = ACC) which broadly speaking relate to specific applications, although there is a lot of overlap. My new team has come from an Access background and have implemented their tables within dbo with a 3-letter perfix followed by "_tbl" so the examples above would be dbo.USR_tblTableName, dbo.GEN_tblTableName and dbo.ACC_tblTableName. Further to this, neither my old team nor my new team has gone live with their SQL Servers yet (we're both coincidentally migrating away from Access environments) and the new team have said they're willing to consider adopting our approach if we can explain how this would be beneficial. We are not anticipating handling table updates at schema level, as we will be using application-level logins. Also, with regards to the unwieldiness of the 7-character prefix, I'm not overly concerned myself as we're using LINQ almost exclusively so the tables can simply be renamed in the DMBL (although I know that presents some challenges when we update the DBML). So therefore, given that both teams need to be aligned with one another, can anyone offer any convincing arguments either way?

  Read the article

• Elementary OS boots to a terminal (other OS) [on hold]

  - by Benjamin Watson

  Im new to this site, please forgive me if I missed some posting protocol of some sort. I am attempting to install Luna on my samsung s2 laptop (a8 amd radeon 7640g) and when I click on try luna, it just pulls up a terminal after the insignia (curvy E). When I install it, same issue. CTRL-ALT-f7 reveals this (hand typed, sorry if there's typos) Starting preload: *starting CUPS printing spooler/server *stopping save kernel messages preload. fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 dosfsck 3.0.12, 29 oct 2011 FAT32, LFN /dev/sda1: 3 files, 245/189518 clusters /dev/sda2: clean, 133841/30294016 files, 2529529/121164544 blocks Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd *starting AppArmor profiles speech-dispacher disabled; edit /etc/default/speech-dispenser *stopping system V initialisation compatibility *starting system V runlevel compatability *starting apci daemon *starting anac(h)ronistic cron *starting save kernal messages *starting ntp server ntpd *starting regular background program processing damon *starting deferred execution scheduler *stopping anac(h)ronistic cron *starting LightDM Display Manager *starting bluetooth daemon *starting mDNS/DNS-SD daemon *starting CPU interrupts balancing daemon *stopping Send an event to indicate plymouth is up saned disabled ; edit /etc/default/saned *starting network connection manager *starting crash report submission daemon *checking battery state... That's it. I can't make heads or tails of it. Please note that while I've been running linux for about a year, I'm still fairly new to all of this, so try to be detailed in your explanations and/or descriptions of what I need to do. Any/all help would be appreciated. Thank you for your time.

  Read the article

• Entering data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no dmain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• How to correct time on Windows PDC server without affecting logons

  - by Kieran Walsh

  I know how to set an authoritative time server in Server 2008 R2. That's not what this question is. I want to know how I can change the time on a network where the PDC (and therefore everything) is a month out of date? I know that a 5 minute difference in time between clients and the domain prevents logons, so just changing the time on the PDC will break everything. What is the best way to fix this? Thanks Kieran.

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83.

  Read the article

• Webkit based browsers on Mac refuse to load certain websites or resources, other browsers work fine from the same machine

  - by BergQuester

  OK, this one has really been puzzling me. Certain websites (such as instapaper.com ) or certain resources (such as the CSS and images for icanhazcheezeburger.com sites) refuse to load at all in Safari or Chrome on any of my Mac machines. Rebooting the machine doesn't fix it. If I use another browser, such as Firefox or a browser on my iPhone or in my Windows virtual machine, the pages load just fine. When the whole page errors out, Safari displays an error: "WebKit encountered an internal error" WebKitErrorDomain:300 This is all from within my home network. Any ideas what could possibly be causing such bizarre behavior?

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >