Search Results

Search found 17924 results on 717 pages for 'z order'.

Page 519/717 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• Ubuntu 12.04 - HP ProLiant DL380 G4 - Load Maxes Out / Unresponsive

  - by Brian S

  Trying to post this question on here. I've posted it on the Ubuntu forums as well with no replies. Recently I upgraded an HP ProLiant DL380 G4 server from Ubuntu 10.04 server to Ubuntu 12.04 server. Upon doing so, the server will not - at random times - get to a load of 400+ and then become completely non-responsive. I use an SNMP graphing program (cacti) and the load steadily increases by about 10 every five minutes until it gets over 400 and the graphing stops. The graphs may not be accurate, but the CPU load averages about 3% before this happens - and right when the load starts increasing, it jumps to about 25% for 15 minutes and dramatically dips down to less than 1% (about 0.3%) until the graphing stops. I'm not able to open a SSH tunnel to the server to do anything. I've checked the /var/log/syslog and all logging stops at that time as well - with nothing else in there. The odd thing is - the server still responds to DNS queries for the zones it is authoritative on during this time - and at normal speed. Just not sure what the next step would be in order to find out what is going on - and how this issue can be corrected. The server cannot stay with Ubuntu 10.04 Server and needs to stay upgraded.

  Read the article

• Apache2 VirtualHost on Debian not working

  - by milo5b

  I am having some problems with Apache2 configuration. I have already tried to look for documentation on the web (Apache's site, Debian's site, here on serverfault, etc), but nothing really helps. I have tried different configurations, but my current configuration is the following (/etc/apache2/sites-available/default): <VirtualHost *:80> ServerAdmin [email protected] ServerName mysite.dev ServerAlias mysite.dev DocumentRoot /var/www/mysite.dev/httpdocs/ ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName livesite.com ServerAlias www.livesite.com DocumentRoot /var/www/livesite.com/httpdocs/ <Directory /var/www/livesite.com/httpdocs/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> mysite.dev it's just an entry in hosts file on my client machine, while livesite.com it's an actual DNS record which would resolve to the same IP as the IP set in hosts file for mysite.dev. The problem is that when i try to type mysite.dev in my browser, it would automatically go to livesite.com. I tried to have different /etc/apache2/sites-enabled/ files (/etc/apache2/sites-enabled/mysite.dev , /etc/apache2/sites-enabled/livesite.com ) - and of course with the actual sites-available related files, but achieving the same results. I have tried to have a peak on error.log and access.log but there's nothing I can see. My httpd.conf contains: AccessFileName .htaccess And I have no /etc/apache2/conf.d/virtual.conf file. Any help would be greatly appreciated - if I did not provide enough info please let me know I will do my best to provide all necessary info. Thanks

  Read the article

• What privilege level is required on a Windows client workstation on an ActiveDomain to break file lo

  - by Mike Burton

  I'm not sure if I should be asking this here or on StackOverflow, but here goes: I'm part of a team maintaining a document management application, and I'm trying to figure out Windows file locking permissions. We use a utility somebody downloaded years ago called psunlock to remotely close all locks on a file. We recently discovered that this does not work across different domains on our VPN. A little bit of digging lead me to the samba manual's discussion of file locking. I still don't really "get it", though. Does anyone have any insight to share into how the process of locking and breaking locks on files works in a network context? My thinking is that privileges are required both on the file appliance and on the client workstations which hold locks. Is that accurate? Can anyone give a more specific version? Ideally I'm looking for something along the lines of A user must have privilege level X in order to break locks held from a client workstation. In practice I'd be happy with a hotlink to a good white paper on the subject.

  Read the article

• Using 1and1.com Servers, SMTP Mail is Limited - Local XAMPP Server Works As Expected

  - by nicorellius

  I'm starting to not like 1and1.com that much. I've used them for years, but mainly for simple sites without much need for configuration. I know there are better hosting companies out and I may go seeking them. The problem here is that on my Local XAMPP server (sitting on a network with Comcast ISP), I have a PHP script that uses PEAR::Mail to send mail using MIME. The script works find locally with either smtp.1and1.com and corresponding credentials and smtp.gmail.com with corresponding credentials, using appropriate ports, etc. 1and1 tells me that I have to change the MX record on the domain where this script runs in order to make this work. This doesn't make sense to me. Now I'm pretty new to all this, but how is it that this is the case? Why can my local server work just fine, out of the box, but their servers not? I have asked them these questions, but they are very vague and I cannot get any good answers from them. Versions: PEAR Version: 1.5.0 PHP Version: 4.4.9 Zend Engine Version: 1.3.0 My apologies in advance for my ignorance. Thanks for the help in advance.

  Read the article

• Xen domU passwd file overwritten with console log output

  - by malfy

  I was setting up a Debian Xen domU and after booting it fine, I added basic configuration to /etc/network/interfaces and ran /etc/init.d/networking restart. This failed so I decided to reboot. After the reboot I also ran xm shutdown box. When dropped to a shell prompt it wouldn't let me login. Upon further inspection, I now have garbage in some critical files in /etc: root@box:/# tail +1 mnt/etc/{passwd-,shadow} tail: cannot open `+1' for reading: No such file or directory ==> mnt/etc/passwd- <== 0000000000100000 (reserved) Nov 23 02:02:39 box kernel: [ 0.000000] Xen: 0000000000100000 - 0000000004000000 (usable) Nov 23 02:02:39 box kernel: [ 0.000000] DMI not present or invalid. Nov 23 02:02:39 box kernel: [ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x1000000 Nov 23 02:02:39 box kernel: [ 0.000000] initial memory mapped : 0 - 033ff000 Nov 23 02:02:39 box kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000 Nov 23 02:02:39 box kernel: [ 0.000000] NX (Execute Disable) protection: active Nov 23 02:02:39 box kernel: [ 0.000000] 0000000000 - 0004000000 page 4k Nov 23 02:02:39 box kernel: [ 0.000000] kernel direct mapping tables up to 4000000 @ 7000-2c000 Nov 23 02:02:3 ==> mnt/etc/shadow <== 32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 Nov 23 02:02:39 box kernel: [ 0.000000] PERCPU: Embedded 15 pages/cpu @c15b0000 s37688 r0 d23752 u65536 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: [0] 0 Nov 23 02:02:39 box kernel: [ 0.000000] Xen: using vcpu_info placement Nov 23 02:02:39 box kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16160 Nov 23 02:02:39 box kernel: [ 0.000000] Kernel command line: root=/dev/mapper/xen-guest_root ro quiet root=/dev/xvda1 ro Nov 23 02:02:39 box kernel: [ 0.000000] PID hash table entries: The garbage is also present in the passwd file and the group file (although I didn't paste that above since I have since ran debootstrap on the filesystem again). Does anyone have any insight into what happened and why?

  Read the article

• Why Ubuntu could treat hosts file so strange?

  - by z4y4ts

  I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

  Read the article

• Improve speed of "start menu" in Linux Mint 10 - Ubuntu 10.10 derivative

  - by Gabriel L. Oliveira

  I have a global menu (including application, administration and system tabs) that is taking too much time (for me) to load (about 2.5 seconds). Of course, this time is taken only during first start. After it have loaded, next times are better ( less than 0.2 miliseconds) The menu was taking more time before (about 5 seconds), and I found that was because of the 'Other' part of the menu, that included many applications installed with Wine, so I removed all of them (I didn't need them at all). I have a "normal" knowledge of programming, and I think that the process of starting the menu for the first time has some kind of "cache function", that tries to find which apps are present that need to be placed under menu to be shown to user. But didn't found this function so that I could analyze in details what he is doing (if searching for files under "~/.local/share/applications" or anything else). Also, I found that hitting "Alt-F2" also fires this "cache function", because after waiting it to load, the process of opening the menu took less than 0.2 miliseconds. So, could anyone help me in order to reduce this time? I found on internet that some user could reduce the time by resizing the icons of applications. But found here that most of my icons are already at 25x25 size. Any other idead? Maybe a multiprocess to load it, or include it under startup... don't know. Ps: Sorry if this is an awkward question, but I just do not like waiting for things to happen, and think that this process should be smoother than it's now. Also, thanks in advance!

  Read the article

• [Word2007] How to showing "only number" in picture cross-reference

  - by kornelijepetak

  I have many pictures in a document and I reference them very often in text. I don't want to lose the order so I am using Insert - Cross-reference. This opens the cross-reference dialog where I can set Reference type to Picture. For "Insert reference to", there are 5 choices: - Entire caption - List item - Only label and number - Only caption text - Page number, Above/below What I need is a reference that would be inserted like this: [4], and not like this: [Picture 4]; None of these options enable me to do it. Is there any way to make Word 2007 insert a reference to only Caption Number? Note: The document is written in Croatian language which has 7 declension cases, so using "Picture 4" would not be valid in all cases. Actually caption label Picture is set to croatian word "Slika" and when I need to say say "in the picture" I can't because it would be "na Slici 5." and not "na Slika 5." (like Word would make me do). That's why I need to reference only the caption number. Is that possible in Word 2007?

  Read the article

• simple apache2 reverse proxy setup not working

  - by Nick

  I know what proxy is (very high level), it's just I have never set up one, and it feels like I might be missing some big fat point here. My setup: client server (static IP), runs apache on port 80 proxy (has 2 network cards, one is on the clients network, the other one with a static IP on the server network), runs apache on port 80 I am trying to configure these three machines so that when client requests: http://proxy/machine1 It gets served server's pages at server root URL, i.e. http://server/ I can access client pages just fine. However, when I try accessing a page from the client machine, it simply gets redirected to server's IP address, which it clearly can't access since they are not on the same network: ... <meta http-equiv="REFRESH" content="0;url=http://server/machine1"></meta> <title>Redirect</title> ... My apache2 config is: LoadModule proxy_module /modules/mod_proxy.so LoadModule proxy_http_module /modules/mod_proxy_http.so ProxyRequests off <Proxy *> Order Allow,Deny Allow from all </Proxy> ProxyPass /machine1 http://server:80 <Location /machine1> ProxyPassReverse / </Location> What gives? Thanks!

  Read the article

• IIS URl Rewrite working inconsistently?

  - by Don Jones

  I'm having some oddness with the URL rewriting in IIS 7. Here's my Web.config (below). You'll see "imported rule 3," which grabs attempts to access /sitemap.xml and redirects them to /sitemap/index. That rule works great. Right below it is imported rule 4, which grabs attempts to access /wlwmanifest.xml and redirects them to /mwapi/wlwmanifest. That rule does NOT work. (BTW, I do know it's "rewriting" not "redirecting" - that's what I want). So... why would two identically-configured rules not work the same way? Order makes no different; Imported Rule 4 doesn't work even if it's in the first position. Thanks for any advice! EDIT: Let me represent the rules in .htaccess format so they don't get eaten :) RewriteEngine On # skip existing files and folders RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] # get special XML files RewriteRule ^(.*)sitemap.xml$ /sitemap/index [NC] RewriteRule ^(.*)wlwmanifest.xml$ /mwapi/index [NC] # send everything to index RewriteRule ^.*$ index.php [NC,L] The "sitemap" rewrite rule works fine; the 'wlwmanifest' rule returns a "not found." Weird.

  Read the article

• How can I make the Windows 7 taskbar behave like a cross between the old Quick Launch and new Superbar?

  - by frumious

  I really like the taskbar in Windows 7, I think combining buttons to launch apps and the icons that show your running apps is groovy. However, because I like having as much space as possible, I've got small icons enabled and shrunk the bar down to one row. I've also told it not to group the running apps unless there's no space left (to save me having to work harder to find the particular window I want), which also means that they have captions, and are thus quite wide. The (admittedly small) problem this gives me is that I can pin all my favourite apps to the bar, which looks much like the old Quick Launch bar, but when I launch them the running apps because much wider, and the unlaunched apps get lost amongst them. I can manually change the order to fix this, but next time I'll launch a different app and I'll be back to square one. What I'd prefer is for small unlaunched icons to be kept on the left, and wider running apps to move over to the right, which for me would be the best of both worlds. Is there any way I can organise that? I'm aware that one can use the traditional quick launch bar in Windows 7, but that's not what I'm after; I generally prefer the Windows 7 way.

  Read the article

• Xen PV packet loss

  - by Delphinator

  I'm having some serious issues with packetloss with one of my servers. This server is a somewhat old (P4-era) machine running Debian Squeeze and Xen 4.0. There are two domUs running on it (both also Debian Squeeze), one gateway and a fileserver. Unfortunatly the processor has no virtualization extensions, therefore only PV can be used. While investigating why our network seems to be slower than it should I found some pretty bad packet loss (~25%). After further investigation and several experiments I did a measurment between the dom0 and one of the domUs: Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to dom0, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.2(domU) port 33817 connected with 192.168.1.100(dom0) port 5001 [ 4] local 192.168.1.2(domU) port 5001 connected with 192.168.1.100(dom0) port 48606 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 46.3 MBytes 38.7 Mbits/sec [ 3] Sent 33020 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 46.2 MBytes 38.6 Mbits/sec 0.030 ms 89/33019 (0.27%) [ 3] 0.0-10.0 sec 1 datagrams received out-of-order [ 4] 0.0-10.2 sec 43.0 MBytes 35.3 Mbits/sec 13.074 ms 11575/42256 (27%) tl;dr: 27% packet loss from dom0 to domU with 50Mbit UDP packets. Same thing happens from anywhere in the network. The problem gets better for smaller bandwidths (0.047% for 5Mbit) and worse for higher (59% for 200Mbit) ones. I did increase the CPU-weight of the dom0, there is no swapping going on, and actual networking-hardware is not involved. I never expected Xen (or anything related) to drop packets, and I'm completly clueless what to try next.

  Read the article

• Performance monitoring on Linux/Unix

  - by ervingsb

  I run a few Windows servers and (Debian and Ubuntu) Linux and AIX servers. I would like to continously monitor performance on these systems in order to easily identify bottlenecks as well as to have an overview of the general activity on the servers. On Windows, I use Windows Performance Monitor (perfmon) for this. I set up these counters: For bottlenecks: Processor utilization : System\Processor Queue Length Memory utilization : Memory\Pages Input/Sec Disk Utilization : PhysicalDisk\Current Disk Queue Length\driveletter Network problems: Network Interface\Output Queue Length\nic name For general activity: Processor utilization : Processor\% Processor Time_Total Memory utilization : Process\Working Set_Total (or per specific process) Memory utilization : Memory\Available MBytes Disk Utilization : PhysicalDisk\Bytes/sec_Total (or per process) Network Utilization : Network Interface\Bytes Total/Sec\nic name (More information on the choice of these counters on: http://itcookbook.net/blog/windows-perfmon-top-ten-counters ) This works really well. It allows me to look in one place and identify most common bottlenecks. So my question is, how can I do something equivalent (or just very similar) on Linux servers? I have looked a bit on nmon (http://www.ibm.com/developerworks/aix/library/au-analyze_aix/) which is a free performance monitoring tool developed for AIX but also availble for Linux. However, I am not sure if nmon allows me to set up the above counters. Maybe it is because Linux and AIX does not allow monitoring these exact same measures. Is so, which ones should I choose and why? If nmon is not the tool to use for this, then what do you recommend?

  Read the article

• Why am I unable to reach local network computers, but able to browse the web?

  - by Igor Zinov'yev

  I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

  Read the article

• Optimize apache for 10K+ wordpress views a day on 2GB RAM E6500 CPU

  - by Broke artist

  I have a dedicated server with apache/php on ubuntu serving my Wordpress blog with about 10K+ pageviews a day. I have W3TC plug in installed with APC. But every now and then server stop responding or goes dead slow and i have to restart apache to get it back. Heres my config what am i doing wrong? ServerRoot "/etc/apache2" LockFile /var/lock/apache2/accept.lock PidFile ${APACHE_PID_FILE} TimeOut 40 KeepAlive on MaxKeepAliveRequests 200 KeepAliveTimeout 2 StartServers 5 MinSpareServers 5 MaxSpareServers 8 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 StartServers 3 MinSpareServers 3 MaxSpareServers 3 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 1000 User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess Order allow,deny Deny from all Satisfy all DefaultType text/plain HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel error Include /etc/apache2/mods-enabled/.load Include /etc/apache2/mods-enabled/.conf Include /etc/apache2/httpd.conf Include /etc/apache2/ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %O" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined Include /etc/apache2/conf.d/ Include /etc/apache2/sites-enabled/

  Read the article

• Apache2 shared server: default webpage

  - by Eamorr

  Greetings, I have an apache2 server with 4 domain names point to my server's single IP address. When I type in www.site1.com it serves pages from /home/eamorr/site1/index.php Same for www.site2.com, www.site3.com and www.site4.com However, when I type in to the address bar of a browser without the www, it always redirects to site1.com! i.e. site1.com - site1.com site2.com - site1.com site3.com - site1.com site4.com - site1.com How do I configure apache to do the following: site1.com - site1.com site2.com - site2.com site3.com - site3.com site4.com - site4.com Here is my default config: ServerAdmin [email protected] ServerName www.site1.com DocumentRoot /home/eamorr/sites/site1.com/www DirectoryIndex index.php index.html <Directory /home/eamorr/sites/site1.com/www> Options Indexes FollowSymLinks MultiViews Options -Indexes AllowOverride all Order allow,deny allow from all php_value session.cookie_domain ".site1.com" #Added by EOH for redirection RewriteEngine on RewriteRule ^([^/.]+)/?$ driver.php?uname=$1 [L] </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined I'd like to look at the domain name and then redirect to www.sitex.com. Is there an Apache rule to do this? I hope someone can help. My SysAdmin/apache2 config skill aren't the best. Many thanks in advance,

  Read the article

• Bad font anti-aliasing in Ubuntu

  - by Juliano

  I'm switching from Fedora 8 to Ubuntu 9.04, and I can't seem to get it to get a good font anti-aliasing to work. It seems that Ubuntu's fontconfig tries to keep characters in integral pixel widths. This makes text more difficult to read, when 1 pixel is too thin and 2 pixels is too thick. Check the image below. In Fedora, when fontconfig anti-aliasing is enabled, fonts have their thickness proportional to the font size. Below, the thickness is different for 8, 9 and 10pt sizes. In Ubuntu, on the other hand, even when anti-aliasing is enabled, all 8, 9 and 10pt sizes have 1 pixel thickness. This makes reading larges amount of text difficult. I'm using the very same home directory, and I already checked that X resources are the same in both systems: ~% xrdb -query | grep Xft Xft.antialias: 1 Xft.dpi: 96 Xft.hinting: 1 Xft.hintstyle: hintfull Xft.rgba: none GNOME settings: ~% gconftool-2 -a /desktop/gnome/font_rendering antialiasing = grayscale hinting = full dpi = 96 rgba_order = rgb So, the question is: What should I change in the new box (Ubuntu) in order to get anti-aliasing like in the old box (Fedora)?

  Read the article

• Why apache throws 403 on index file after install?

  - by den-javamaniac

  Hi. I've just installed apache and php from sources using next commands: ./configure --prefix="/mnt/workspace/servers/web/apache-2.2.17" \ --enable-info --enable-rewrite --enable-usertrack --enable-mime-magic for apache and ./configure --with-apxs2=/mnt/workspace/servers/web/apache-2.2.17/bin/apxs \ --prefix=/mnt/workspace/servers/web/apache-2.2.17/php \ --with-config-file-path=/mnt/workspace/servers/web/apache-2.2.17/php \ --with-mysql=mysqlnd for php. After adjusting configuration (httpd.conf) and starting apache it gives a 403 response on http://localhost:8060/index.html (presuming that 8060 is used) request. There are next directory settings in httpd.conf: <Directory "/mnt/workspace/servers/web/apache-2.2.17/htdocs"> ... Order allow,deny Allow from all ... </Directory> <IfModule dir_module> DirectoryIndex index.html index.php </IfModule> It should be noted that I've got apache on a mounted (default auto mount configured while installing ubuntu) partition. Log Files Access log: ::1 - - [12/Feb/2011:17:48:30 +0200] "GET / HTTP/1.1" 403 202 ::1 - - [12/Feb/2011:17:48:31 +0200] "GET /favicon.ico HTTP/1.1" 403 213 ::1 - - [12/Feb/2011:17:48:48 +0200] "GET /index.html HTTP/1.1" 403 212 ::1 - - [12/Feb/2011:17:48:48 +0200] "GET /favicon.ico HTTP/1.1" 403 213 ::1 - - [12/Feb/2011:17:49:03 +0200] "GET /index.html HTTP/1.1" 403 212 ::1 - - [12/Feb/2011:17:49:03 +0200] "GET /favicon.ico HTTP/1.1" 403 213 Error log: [Sat Feb 12 18:59:13 2011] [notice] Apache/2.2.17 (Unix) PHP/5.3.5 configured -- resuming normal operations [Sat Feb 12 18:59:22 2011] [error] [client ::1] (13)Permission denied: access to / denied [Sat Feb 12 18:59:22 2011] [error] [client ::1] (13)Permission denied: access to /favicon.ico denied [Sat Feb 12 18:59:36 2011] [error] [client ::1] (13)Permission denied: access to /index.html denied

  Read the article

• 1and1 ssh - connection refused

  - by kitensei

  I'm having troubles connecting through SSH to my 1&1 account. When I try to connect with command userXXX@host -p22 -vv I have the following output: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to mySite.com [ip_here] port 22. debug1: connect to address ip_here port 22: Connection refused Moreover, once I try to connect through SSH and it fails, even the HTTP access is dead, I cannot access the website through explorer anymore :/ please help < I'm running ubuntu 11.10 EDIT: don't know if it can help, here's the .htaccess of the 1and1 server Options +Indexes Satisfy any Order Deny,Allow Allow from 212.227.X.X Deny from all RemoveType .html .gif AuthType Basic AuthName "Access to /logs" AuthUserFile /kunden/homepages/43/d376072470/htpasswd Require user "user_here" and sftp.log: Mar 26 09:21:24 193.251.X USER_HERE Connection from 193.251.X port 51809 Mar 26 09:21:30 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:39 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:41 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:45 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:57 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 10:53:36 212.227.X tmp64459736-3228 Connection from 212.227.X port 23275 Mar 26 10:53:36 212.227.X tmp64459736-3228 Accepted password for tmp64459736-3228 from 212.227.X port 23275 ssh2 Mar 26 11:53:37 212.227.X tmp64459736-3228 Connection closed by 212.227.X Mar 26 18:58:17 212.227.X tmp64459736-5363 Connection from 212.227.X port 23353 Mar 26 18:58:17 212.227.X tmp64459736-5363 Accepted password for tmp64459736-5363 from 212.227.X port 23353 ssh2 Mar 26 19:53:36 212.227.X tmp64459736-8525 Connection from 212.227.X port 5166 Mar 26 19:53:36 212.227.X tmp64459736-8525 Accepted password for tmp64459736-8525 from 212.227.X port 5166 ssh2 Mar 26 19:58:17 212.227.X tmp64459736-5363 Connection closed by 212.227.X

  Read the article

• Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

  - by music2myear

  Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

  Read the article

• Ruckus wireless AP and Dell PowerConnect configuration problems

  - by DanielJay

  We are working on trying to get some Ruckus Access Points to work correctly on our network. Currently our network is as follows: VLAN 10 - Servers VLAN 11 – Computers/DHCP VLAN 12 – Voice VLAN 13 – Guest We use Dell PowerConnect 6248P switches for our switches. Port settings are as follows: ZoneDirector 1100 is plugged into this port. Should be accessing the server VLAN and then allowing all other traffic. interface ethernet 1/g2 classofservice trust ip-dscp description 'Ruckus ZoneDirector 1100' switchport mode general switchport general pvid 10 switchport general allowed vlan add 10 switchport general allowed vlan add 11-13 tagged exit Access point is plugged into this port. The port has to be on VLAN 11 in order to get DHCP. interface ethernet 1/g16 classofservice trust ip-dscp description 'Ruckus - IT' switchport mode general switchport general pvid 11 switchport general allowed vlan add 10-12 switchport general allowed vlan add 13 tagged exit If we tag the traffic from the SSID as VLAN 11 data fails. If we leave the SSID tagged as 1 the data flows correctly. Are there problems with passing tagged traffic to untagged ports? We are looking to see what we can do to get the SSID tagged as 11 instead of 1. Any suggestions?

  Read the article

• SQL Query to update parent record with child record values

  - by Wells

  I need to create a Trigger that fires when a child record (Codes) is added, updated or deleted. The Trigger stuffs a string of comma separated Code values from all child records (Codes) into a single field in the parent record (Projects) of the added, updated or deleted child record. I am stuck on writing a correct query to retrieve the Code values from just those child records that are the children of a single parent record. -- Create the test tables CREATE TABLE projects ( ProjectId varchar(16) PRIMARY KEY, ProjectName varchar(100), Codestring nvarchar(100) ) GO CREATE TABLE prcodes ( CodeId varchar(16) PRIMARY KEY, Code varchar (4), ProjectId varchar(16) ) GO -- Add sample data to tables: Two projects records, one with 3 child records, the other with 2. INSERT INTO projects (ProjectId, ProjectName) SELECT '101','Smith' UNION ALL SELECT '102','Jones' GO INSERT INTO prcodes (CodeId, Code, ProjectId) SELECT 'A1','Blue', '101' UNION ALL SELECT 'A2','Pink', '101' UNION ALL SELECT 'A3','Gray', '101' UNION ALL SELECT 'A4','Blue', '102' UNION ALL SELECT 'A5','Gray', '102' GO I am stuck on how to create a correct Update query. Can you help fix this query? -- Partially working, but stuffs all values, not just values from chile (prcodes) records of parent (projects) UPDATE proj SET proj.Codestring = (SELECT STUFF((SELECT ',' + prc.Code FROM projects proj INNER JOIN prcodes prc ON proj.ProjectId = prc.ProjectId ORDER BY 1 ASC FOR XML PATH('')),1, 1, '')) The result I get for the Codestring field in Projects is: ProjectId ProjectName Codestring 101 Smith Blue,Blue,Gray,Gray,Pink ... But the result I need for the Codestring field in Projects is: ProjectId ProjectName Codestring 101 Smith Blue,Pink,Gray ... Here is my start on the Trigger. The Update query, above, will be added to this Trigger. Can you help me complete the Trigger creation query? CREATE TRIGGER Update_Codestring ON prcodes AFTER INSERT, UPDATE, DELETE AS WITH CTE AS ( select ProjectId from inserted union select ProjectId from deleted )

  Read the article

• Replicated MongoDB server slower than simple shards

  - by displayName

  I tried to compare the performance of a sharded configuration against a sharded and replicated configuration. The sharded configuration consists of 8 shards each running on three different machines thereby constituting a total of 24 shards. All 8 of these shards run in the same partition on each machine. The sharded and replicated version is 8 shards again just like plain sharding, and all 8 mongods run on the same partition in each machine. But apart from this, each of these three machine now run additional 16 threads on another partition which serve as the secondary for the 8 mongods running on other machines. This is the way I prepared a sharded and replicated configuration with data chunks having replication factor of 3. Important point to note is that once the data has been loaded, it is not modified. So after primary and secondaries have synchronized then it doesn't matter which one i read from. To run the queries, I use an entirely different machine (let's call it config) which runs mongos and this machine's only purpose is to receive queries and run them on the cluster. Contrary to my expectations, plain sharding of 8 threads on each machine (total = 3 * 8 = 24) is performing better for queries than the sharded + replicated configuration. I have a script written to perform the query. So in order to time the scripts, I use time ./testScript and see the result. I tried changing the reading preference for replicated cluster by logging to mongo of config and run db.getMongo().setReadPref('secondary') and then exit the shell and run the queries like time ./testScript. The questions are: Where am i going wrong in the replication? Why is it slower than its plain sharding version? Does the db.getMongo().ReadPref('secondary') persist when i leave the shell and try to perform the query? All the four machines are running Linux and i have already increased the ulimit -n to 2048 from initial value of 1024 to allow more connections. The collections are properly distributed and all the mongods have equal number of chunks. Goes without saying that indices in both configurations are the same.

  Read the article

• How can I control disk numbering (enumeration) in Windows 7 Disk Management?

  - by tim11g

  A desktop system had two drives (Assigned C and D, which were enumerated in Disk Management as Disk 0 and Disk 1). A new SSD was added as the boot drive, after copying the C drive to the SSD. The SSD was connected to SATA 0 (master) port on the motherboard. The previous C Drive was moved to SATA 2 and is reformatted as a non-booting NTFS partition. The D drive remained on SATA 1. The system boots and everything seems fine. I was able to manually adjust the Drive Letters. However, the list in Disk Management is re-ordered. Disk 0 is the the previous Disk 2 (D Drive) on SATA 1, Disk 1 is the new Boot Drive (now C) on SATA 0, and Disk 2 is the former C Drive (now assigned E) on SATA 2. Does the Disk 0, 1, 2, designation mean anything? I would prefer to have them display in Disk Management as Drives C, D, and E from top to bottom. Is the Disk enumeration based on the SATA port or something else? (If it was based on SATA Port, they should be ordered C, D, E. Is there any way to re-order the Disk number assignments? What actually does determine the Disk number enumeration?

  Read the article

• Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

  - by Dejan Janjuševic

  At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional client via VPN. The VPN was set up using RRAS on the server machine. I will try to provide as much informations as possible in order to make the issue more clear. When trying to copy the compressed file sized ~2.5 MB (via Explorer or CMD, doesn't matter), the process stalls after some 20%, producing an error message after few seconds: Cannot copy filename: The specified network name is no longer available. If i start the command ping -t 192.168.2.1 (where the IP address specified belongs to the server) side by side with the copy command, I can clearly see that the ping command times out for few seconds as the copy process stalls. When this happens all network activities are frozen. After a few seconds, the network recovers, ping continues to run normally, however the copy process stands still before it displays the above error message. Copying other files (I tried 4-5 files), of which some are larger and some are smaller, succeeds. Seems to me that I can copy all uncompressed files. As soon as I try to copy an archive, the process freezes. Even a 707 KB large archive can't be copied. I can only reproduce this behavior on 2 machines, both Windows XP Professional, one is w/ SP2 and the other w/ SP3. Other XP clients don't have this problem, neither do Windows 7 clients. If I connect to the server using Remote Desktop Connection without using VPN from either of these 2 machines (using the same user account), I can copy anything I want normally, even these "problematic" files. Does anyone have any clue about what could possibly be going on?

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >