Search Results

Search found 11782 results on 472 pages for 'bool dev'.

Page 52/472 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • GIT and Django Projects

    - by Garfonzo
    I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

    Read the article

  • mdadm lvm and ext4 slowness - How can I speed it up?

    - by beatbreaker
    I can't figure out why I'm getting such terrible times out of my mdadm and in particular the lvm partitions in it. I made the raid: mdadm --create --verbose /dev/md0 --level=5 --chunk=1024 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid5 sda1[0] sdd1[3] sdc1[2] sdb1[1] 2930279424 blocks level 5, 1024k chunk, algorithm 2 [4/4] [UUUU] I then created the physical volume, volume group, and logical volumes, I then formatted the logical volumes to ext4 using the following commands I got from here: http://busybox.net/~aldot/mkfs_stride.html mkfs.ext3 -b 4096 -E stride=256,stripe-width=768 /dev/datavg/blah Now I'm confused, I had these lvs running real quick before in mdadm but now that I've 'optimized' everything it's slower, eg, before: /dev/datavg/lv_audio: Timing buffered disk reads: 598 MB in 3.01 seconds = 198.85 MB/sec but now after: /dev/datavg/audio: Timing buffered disk reads: 198 MB in 3.00 seconds = 65.96 MB/sec That's pitiful! What's happened here? Did I not follow the instructions correctly? Can i reshape the ext4 partitons to default back to what they were? (I used defaults before and they were fine!)

    Read the article

  • C# XNA Handle mouse events?

    - by user406470
    I'm making a 2D game engine called Clixel over on GitHub. The problem I have relates to two classes, ClxMouse and ClxButton. In it I have a mouse class - the code for that can be viewed here. ClxMouse using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; namespace org.clixel { public class ClxMouse : ClxSprite { private MouseState _curmouse, _lastmouse; public int Sensitivity = 3; public bool Lock = true; public Vector2 Change { get { return new Vector2(_curmouse.X - _lastmouse.X, _curmouse.Y - _lastmouse.Y); } } private int _scrollwheel; public int ScrollWheel { get { return _scrollwheel; } } public bool LeftDown { get { if (_curmouse.LeftButton == ButtonState.Pressed) return true; else return false; } } public bool RightDown { get { if (_curmouse.RightButton == ButtonState.Pressed) return true; else return false; } } public bool MiddleDown { get { if (_curmouse.MiddleButton == ButtonState.Pressed) return true; else return false; } } public bool LeftPressed { get { if (_curmouse.LeftButton == ButtonState.Pressed && _lastmouse.LeftButton == ButtonState.Released) return true; else return false; } } public bool RightPressed { get { if (_curmouse.RightButton == ButtonState.Pressed && _lastmouse.RightButton == ButtonState.Released) return true; else return false; } } public bool MiddlePressed { get { if (_curmouse.MiddleButton == ButtonState.Pressed && _lastmouse.MiddleButton == ButtonState.Released) return true; else return false; } } public bool LeftReleased { get { if (_curmouse.LeftButton == ButtonState.Released && _lastmouse.LeftButton == ButtonState.Pressed) return true; else return false; } } public bool RightReleased { get { if (_curmouse.RightButton == ButtonState.Released && _lastmouse.RightButton == ButtonState.Pressed) return true; else return false; } } public bool MiddleReleased { get { if (_curmouse.MiddleButton == ButtonState.Released && _lastmouse.MiddleButton == ButtonState.Pressed) return true; else return false; } } public MouseState CurMouse { get { return _curmouse; } } public MouseState LastMouse { get { return _lastmouse; } } public ClxMouse() : base(ClxG.Textures.Default.Cursor) { _curmouse = Mouse.GetState(); _lastmouse = _curmouse; CollisionBox = new Rectangle(ClxG.Screen.Center.X, ClxG.Screen.Center.Y, Texture.Width, Texture.Height); this.Solid = false; DefaultPosition = new Vector2(CollisionBox.X, CollisionBox.Y); Mouse.SetPosition(CollisionBox.X, CollisionBox.Y); } public ClxMouse(Texture2D _texture) : base(_texture) { _curmouse = Mouse.GetState(); _lastmouse = _curmouse; CollisionBox = new Rectangle(ClxG.Screen.Center.X, ClxG.Screen.Center.Y, Texture.Width, Texture.Height); DefaultPosition = new Vector2(CollisionBox.X, CollisionBox.Y); } public override void Update() { _lastmouse = _curmouse; _curmouse = Mouse.GetState(); if (_curmouse != _lastmouse) { if (ClxG.Game.IsActive) { _scrollwheel = _curmouse.ScrollWheelValue; Velocity = new Vector2(Change.X / Sensitivity, Change.Y / Sensitivity); if (Lock) Mouse.SetPosition(ClxG.Screen.Center.X, ClxG.Screen.Center.Y); _curmouse = Mouse.GetState(); } base.Update(); } } public override void Draw(SpriteBatch _sb) { base.Draw(_sb); } } } ClxButton using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; namespace org.clixel { public class ClxButton : ClxSprite { /// <summary> /// The color when the mouse is over the button /// </summary> public Color HoverColor; /// <summary> /// The color when the color is being clicked /// </summary> public Color ClickColor; /// <summary> /// The color when the button is inactive /// </summary> public Color InactiveColor; /// <summary> /// The color when the button is active /// </summary> public Color ActiveColor; /// <summary> /// The color after the button has been clicked. /// </summary> public Color ClickedColor; /// <summary> /// The text to be displayed on the button, set to "" if no text is needed. /// </summary> public string Text; /// <summary> /// The ClxText object to be displayed. /// </summary> public ClxText TextRender; /// <summary> /// The ClxState that should be ResetAndShow() when the button is clicked. /// </summary> public ClxState ClickState; /// <summary> /// Collision check to make sure onCollide() only runs once per frame, /// since only the mouse needs to be collision checked. /// </summary> private bool _runonce = false; /// <summary> /// Gets a value indicating whether this instance is colliding. /// </summary> /// <value> /// <c>true</c> if this instance is colliding; otherwise, <c>false</c>. /// </value> public bool IsColliding { get { return _runonce; } } /// <summary> /// Initializes a new instance of the <see cref="ClxButton"/> class. /// </summary> public ClxButton() : base(ClxG.Textures.Default.Button) { HoverColor = Color.Red; ClickColor = Color.Blue; InactiveColor = Color.Gray; ActiveColor = Color.White; ClickedColor = Color.Yellow; Text = Name + ID + " Unset!"; TextRender = new ClxText(); TextRender.Text = Text; TextRender.TextPadding = new Vector2(5, 5); ClickState = null; CollideObjects(ClxG.Mouse); } /// <summary> /// Initializes a new instance of the <see cref="ClxButton"/> class. /// </summary> /// <param name="_texture">The button texture.</param> public ClxButton(Texture2D _texture) : base(_texture) { HoverColor = Color.Red; ClickColor = Color.Blue; InactiveColor = Color.Gray; ActiveColor = Color.White; ClickedColor = Color.Yellow; Texture = _texture; Text = Name + ID; TextRender = new ClxText(); TextRender.Name = this.Name + ".TextRender"; TextRender.Text = Text; TextRender.TextPadding = new Vector2(5, 5); TextRender.Reset(); ClickState = null; CollideObjects(ClxG.Mouse); } /// <summary> /// Draws the debug information, run from ClxG.DrawDebug unless manual control is assumed. /// </summary> /// <param name="_sb">SpriteBatch used for drawing.</param> public override void DrawDebug(SpriteBatch _sb) { _runonce = false; TextRender.DrawDebug(_sb); _sb.Draw(Texture, ActualRectangle, new Rectangle(0, 0, Texture.Width, Texture.Height), DebugColor, Rotation, Origin, Flip, Layer); _sb.Draw(ClxG.Textures.Default.DebugBG, new Rectangle(ActualRectangle.X - DebugLineWidth, ActualRectangle.Y - DebugLineWidth, ActualRectangle.Width + DebugLineWidth * 2, ActualRectangle.Height + DebugLineWidth * 2), new Rectangle(0, 0, ClxG.Textures.Default.DebugBG.Width, ClxG.Textures.Default.DebugBG.Height), DebugOutline, Rotation, Origin, Flip, Layer - 0.1f); _sb.Draw(ClxG.Textures.Default.DebugBG, ActualRectangle, new Rectangle(0, 0, ClxG.Textures.Default.DebugBG.Width, ClxG.Textures.Default.DebugBG.Height), DebugBGColor, Rotation, Origin, Flip, Layer - 0.01f); } /// <summary> /// Draws using the SpriteBatch, run from ClxG.Draw unless manual control is assumed. /// </summary> /// <param name="_sb">SpriteBatch used for drawing.</param> public override void Draw(SpriteBatch _sb) { _runonce = false; TextRender.Draw(_sb); if (Visible) if (Debug) { DrawDebug(_sb); } else _sb.Draw(Texture, ActualRectangle, new Rectangle(0, 0, Texture.Width, Texture.Height), Color, Rotation, Origin, Flip, Layer); } /// <summary> /// Updates this instance. /// </summary> public override void Update() { if (this.Color != ActiveColor) this.Color = ActiveColor; TextRender.Layer = this.Layer + 0.03f; TextRender.Text = Text; TextRender.Scale = .5f; TextRender.Name = this.Name + ".TextRender"; TextRender.Origin = new Vector2(TextRender.CollisionBox.Center.X, TextRender.CollisionBox.Center.Y); TextRender.Center(this); TextRender.Update(); this.CollisionBox.Width = (int)(TextRender.CollisionBox.Width * TextRender.Scale) + (int)(TextRender.TextPadding.X * 2); this.CollisionBox.Height = (int)(TextRender.CollisionBox.Height * TextRender.Scale) + (int)(TextRender.TextPadding.Y * 2); base.Update(); } /// <summary> /// Collide event, takes the colliding object to call it's proper collision code. /// You'd want to use something like if(typeof(collider) == typeof(ClxObject) /// </summary> /// <param name="collider">The colliding object.</param> public override void onCollide(ClxObject collider) { if (!_runonce) { _runonce = true; UpdateEvents(); base.onCollide(collider); } } /// <summary> /// Updates the mouse based events. /// </summary> public void UpdateEvents() { onHover(); if (ClxG.Mouse.LeftReleased) { onLeftReleased(); return; } if (ClxG.Mouse.RightReleased) { onRightReleased(); return; } if (ClxG.Mouse.MiddleReleased) { onMiddleReleased(); return; } if (ClxG.Mouse.LeftPressed) { onLeftClicked(); return; } if (ClxG.Mouse.RightPressed) { onRightClicked(); return; } if (ClxG.Mouse.MiddlePressed) { onMiddleClicked(); return; } if (ClxG.Mouse.LeftDown) { onLeftClick(); return; } if (ClxG.Mouse.RightDown) { onRightClick(); return; } if (ClxG.Mouse.MiddleDown) { onMiddleClick(); return; } } /// <summary> /// Shows the state of the click. /// </summary> public void ShowClickState() { if (ClickState != null) { ClickState.ResetAndShow(); } } /// <summary> /// Hover event /// </summary> virtual public void onHover() { this.Color = HoverColor; } /// <summary> /// Left click event /// </summary> virtual public void onLeftClick() { this.Color = ClickColor; } /// <summary> /// Right click event /// </summary> virtual public void onRightClick() { } /// <summary> /// Middle click event /// </summary> virtual public void onMiddleClick() { } /// <summary> /// Left click event, called once per click /// </summary> virtual public void onLeftClicked() { ShowClickState(); } /// <summary> /// Right click event, called once per click /// </summary> virtual public void onRightClicked() { this.Reset(); } /// <summary> /// Middle click event, called once per click /// </summary> virtual public void onMiddleClicked() { } /// <summary> /// Ons the left released. /// </summary> virtual public void onLeftReleased() { this.Color = ClickedColor; } virtual public void onRightReleased() { } virtual public void onMiddleReleased() { } } } The issue I have is that I have all these have event styled methods, especially in ClxButton with all the onLeftClick, onRightClick, etc, etc. Is there a better way for me to handle these events to be a lot more easier for a programmer to use? I was looking at normal events on some other sites, (I'd post them but I need more rep.) and didn't really see a good way to implement delegate events into my framework. I'm not really sure how these events work, could someone possibly lay out how these events are processed for me? TL:DR * Is there a better way to handle events like this? * Are events a viable solution to this problem? Thanks in advance for any help.

    Read the article

  • ec2-user password for running sudo -H -u

    - by bool.dev
    I have to run this command to initialize gitosis: sudo -H -u git gitosis-init < /home/ec2-user/id_rsa.pub But that asks me for a password for ec2-user: $ sudo -H -u git gitosis-init < id_rsa.pub [sudo] password for ec2-user: I do not have a password as i use the default .pem key file to login. I know i can probably login as the git user and do this, but is there any other way? Update: Using Linux AMI 12.09 (micro-instance), in region us-east-1 (N. Virginia)

    Read the article

  • Creating a dynamic, extensible C# Expando Object

    - by Rick Strahl
    I love dynamic functionality in a strongly typed language because it offers us the best of both worlds. In C# (or any of the main .NET languages) we now have the dynamic type that provides a host of dynamic features for the static C# language. One place where I've found dynamic to be incredibly useful is in building extensible types or types that expose traditionally non-object data (like dictionaries) in easier to use and more readable syntax. I wrote about a couple of these for accessing old school ADO.NET DataRows and DataReaders more easily for example. These classes are dynamic wrappers that provide easier syntax and auto-type conversions which greatly simplifies code clutter and increases clarity in existing code. ExpandoObject in .NET 4.0 Another great use case for dynamic objects is the ability to create extensible objects - objects that start out with a set of static members and then can add additional properties and even methods dynamically. The .NET 4.0 framework actually includes an ExpandoObject class which provides a very dynamic object that allows you to add properties and methods on the fly and then access them again. For example with ExpandoObject you can do stuff like this:dynamic expand = new ExpandoObject(); expand.Name = "Rick"; expand.HelloWorld = (Func<string, string>) ((string name) => { return "Hello " + name; }); Console.WriteLine(expand.Name); Console.WriteLine(expand.HelloWorld("Dufus")); Internally ExpandoObject uses a Dictionary like structure and interface to store properties and methods and then allows you to add and access properties and methods easily. As cool as ExpandoObject is it has a few shortcomings too: It's a sealed type so you can't use it as a base class It only works off 'properties' in the internal Dictionary - you can't expose existing type data It doesn't serialize to XML or with DataContractSerializer/DataContractJsonSerializer Expando - A truly extensible Object ExpandoObject is nice if you just need a dynamic container for a dictionary like structure. However, if you want to build an extensible object that starts out with a set of strongly typed properties and then allows you to extend it, ExpandoObject does not work because it's a sealed class that can't be inherited. I started thinking about this very scenario for one of my applications I'm building for a customer. In this system we are connecting to various different user stores. Each user store has the same basic requirements for username, password, name etc. But then each store also has a number of extended properties that is available to each application. In the real world scenario the data is loaded from the database in a data reader and the known properties are assigned from the known fields in the database. All unknown fields are then 'added' to the expando object dynamically. In the past I've done this very thing with a separate property - Properties - just like I do for this class. But the property and dictionary syntax is not ideal and tedious to work with. I started thinking about how to represent these extra property structures. One way certainly would be to add a Dictionary, or an ExpandoObject to hold all those extra properties. But wouldn't it be nice if the application could actually extend an existing object that looks something like this as you can with the Expando object:public class User : Westwind.Utilities.Dynamic.Expando { public string Email { get; set; } public string Password { get; set; } public string Name { get; set; } public bool Active { get; set; } public DateTime? ExpiresOn { get; set; } } and then simply start extending the properties of this object dynamically? Using the Expando object I describe later you can now do the following:[TestMethod] public void UserExampleTest() { var user = new User(); // Set strongly typed properties user.Email = "[email protected]"; user.Password = "nonya123"; user.Name = "Rickochet"; user.Active = true; // Now add dynamic properties dynamic duser = user; duser.Entered = DateTime.Now; duser.Accesses = 1; // you can also add dynamic props via indexer user["NickName"] = "AntiSocialX"; duser["WebSite"] = "http://www.west-wind.com/weblog"; // Access strong type through dynamic ref Assert.AreEqual(user.Name,duser.Name); // Access strong type through indexer Assert.AreEqual(user.Password,user["Password"]); // access dyanmically added value through indexer Assert.AreEqual(duser.Entered,user["Entered"]); // access index added value through dynamic Assert.AreEqual(user["NickName"],duser.NickName); // loop through all properties dynamic AND strong type properties (true) foreach (var prop in user.GetProperties(true)) { object val = prop.Value; if (val == null) val = "null"; Console.WriteLine(prop.Key + ": " + val.ToString()); } } As you can see this code somewhat blurs the line between a static and dynamic type. You start with a strongly typed object that has a fixed set of properties. You can then cast the object to dynamic (as I discussed in my last post) and add additional properties to the object. You can also use an indexer to add dynamic properties to the object. To access the strongly typed properties you can use either the strongly typed instance, the indexer or the dynamic cast of the object. Personally I think it's kinda cool to have an easy way to access strongly typed properties by string which can make some data scenarios much easier. To access the 'dynamically added' properties you can use either the indexer on the strongly typed object, or property syntax on the dynamic cast. Using the dynamic type allows all three modes to work on both strongly typed and dynamic properties. Finally you can iterate over all properties, both dynamic and strongly typed if you chose. Lots of flexibility. Note also that by default the Expando object works against the (this) instance meaning it extends the current object. You can also pass in a separate instance to the constructor in which case that object will be used to iterate over to find properties rather than this. Using this approach provides some really interesting functionality when use the dynamic type. To use this we have to add an explicit constructor to the Expando subclass:public class User : Westwind.Utilities.Dynamic.Expando { public string Email { get; set; } public string Password { get; set; } public string Name { get; set; } public bool Active { get; set; } public DateTime? ExpiresOn { get; set; } public User() : base() { } // only required if you want to mix in seperate instance public User(object instance) : base(instance) { } } to allow the instance to be passed. When you do you can now do:[TestMethod] public void ExpandoMixinTest() { // have Expando work on Addresses var user = new User( new Address() ); // cast to dynamicAccessToPropertyTest dynamic duser = user; // Set strongly typed properties duser.Email = "[email protected]"; user.Password = "nonya123"; // Set properties on address object duser.Address = "32 Kaiea"; //duser.Phone = "808-123-2131"; // set dynamic properties duser.NonExistantProperty = "This works too"; // shows default value Address.Phone value Console.WriteLine(duser.Phone); } Using the dynamic cast in this case allows you to access *three* different 'objects': The strong type properties, the dynamically added properties in the dictionary and the properties of the instance passed in! Effectively this gives you a way to simulate multiple inheritance (which is scary - so be very careful with this, but you can do it). How Expando works Behind the scenes Expando is a DynamicObject subclass as I discussed in my last post. By implementing a few of DynamicObject's methods you can basically create a type that can trap 'property missing' and 'method missing' operations. When you access a non-existant property a known method is fired that our code can intercept and provide a value for. Internally Expando uses a custom dictionary implementation to hold the dynamic properties you might add to your expandable object. Let's look at code first. The code for the Expando type is straight forward and given what it provides relatively short. Here it is.using System; using System.Collections.Generic; using System.Linq; using System.Dynamic; using System.Reflection; namespace Westwind.Utilities.Dynamic { /// <summary> /// Class that provides extensible properties and methods. This /// dynamic object stores 'extra' properties in a dictionary or /// checks the actual properties of the instance. /// /// This means you can subclass this expando and retrieve either /// native properties or properties from values in the dictionary. /// /// This type allows you three ways to access its properties: /// /// Directly: any explicitly declared properties are accessible /// Dynamic: dynamic cast allows access to dictionary and native properties/methods /// Dictionary: Any of the extended properties are accessible via IDictionary interface /// </summary> [Serializable] public class Expando : DynamicObject, IDynamicMetaObjectProvider { /// <summary> /// Instance of object passed in /// </summary> object Instance; /// <summary> /// Cached type of the instance /// </summary> Type InstanceType; PropertyInfo[] InstancePropertyInfo { get { if (_InstancePropertyInfo == null && Instance != null) _InstancePropertyInfo = Instance.GetType().GetProperties(BindingFlags.Instance | BindingFlags.Public | BindingFlags.DeclaredOnly); return _InstancePropertyInfo; } } PropertyInfo[] _InstancePropertyInfo; /// <summary> /// String Dictionary that contains the extra dynamic values /// stored on this object/instance /// </summary> /// <remarks>Using PropertyBag to support XML Serialization of the dictionary</remarks> public PropertyBag Properties = new PropertyBag(); //public Dictionary<string,object> Properties = new Dictionary<string, object>(); /// <summary> /// This constructor just works off the internal dictionary and any /// public properties of this object. /// /// Note you can subclass Expando. /// </summary> public Expando() { Initialize(this); } /// <summary> /// Allows passing in an existing instance variable to 'extend'. /// </summary> /// <remarks> /// You can pass in null here if you don't want to /// check native properties and only check the Dictionary! /// </remarks> /// <param name="instance"></param> public Expando(object instance) { Initialize(instance); } protected virtual void Initialize(object instance) { Instance = instance; if (instance != null) InstanceType = instance.GetType(); } /// <summary> /// Try to retrieve a member by name first from instance properties /// followed by the collection entries. /// </summary> /// <param name="binder"></param> /// <param name="result"></param> /// <returns></returns> public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; // first check the Properties collection for member if (Properties.Keys.Contains(binder.Name)) { result = Properties[binder.Name]; return true; } // Next check for Public properties via Reflection if (Instance != null) { try { return GetProperty(Instance, binder.Name, out result); } catch { } } // failed to retrieve a property result = null; return false; } /// <summary> /// Property setter implementation tries to retrieve value from instance /// first then into this object /// </summary> /// <param name="binder"></param> /// <param name="value"></param> /// <returns></returns> public override bool TrySetMember(SetMemberBinder binder, object value) { // first check to see if there's a native property to set if (Instance != null) { try { bool result = SetProperty(Instance, binder.Name, value); if (result) return true; } catch { } } // no match - set or add to dictionary Properties[binder.Name] = value; return true; } /// <summary> /// Dynamic invocation method. Currently allows only for Reflection based /// operation (no ability to add methods dynamically). /// </summary> /// <param name="binder"></param> /// <param name="args"></param> /// <param name="result"></param> /// <returns></returns> public override bool TryInvokeMember(InvokeMemberBinder binder, object[] args, out object result) { if (Instance != null) { try { // check instance passed in for methods to invoke if (InvokeMethod(Instance, binder.Name, args, out result)) return true; } catch { } } result = null; return false; } /// <summary> /// Reflection Helper method to retrieve a property /// </summary> /// <param name="instance"></param> /// <param name="name"></param> /// <param name="result"></param> /// <returns></returns> protected bool GetProperty(object instance, string name, out object result) { if (instance == null) instance = this; var miArray = InstanceType.GetMember(name, BindingFlags.Public | BindingFlags.GetProperty | BindingFlags.Instance); if (miArray != null && miArray.Length > 0) { var mi = miArray[0]; if (mi.MemberType == MemberTypes.Property) { result = ((PropertyInfo)mi).GetValue(instance,null); return true; } } result = null; return false; } /// <summary> /// Reflection helper method to set a property value /// </summary> /// <param name="instance"></param> /// <param name="name"></param> /// <param name="value"></param> /// <returns></returns> protected bool SetProperty(object instance, string name, object value) { if (instance == null) instance = this; var miArray = InstanceType.GetMember(name, BindingFlags.Public | BindingFlags.SetProperty | BindingFlags.Instance); if (miArray != null && miArray.Length > 0) { var mi = miArray[0]; if (mi.MemberType == MemberTypes.Property) { ((PropertyInfo)mi).SetValue(Instance, value, null); return true; } } return false; } /// <summary> /// Reflection helper method to invoke a method /// </summary> /// <param name="instance"></param> /// <param name="name"></param> /// <param name="args"></param> /// <param name="result"></param> /// <returns></returns> protected bool InvokeMethod(object instance, string name, object[] args, out object result) { if (instance == null) instance = this; // Look at the instanceType var miArray = InstanceType.GetMember(name, BindingFlags.InvokeMethod | BindingFlags.Public | BindingFlags.Instance); if (miArray != null && miArray.Length > 0) { var mi = miArray[0] as MethodInfo; result = mi.Invoke(Instance, args); return true; } result = null; return false; } /// <summary> /// Convenience method that provides a string Indexer /// to the Properties collection AND the strongly typed /// properties of the object by name. /// /// // dynamic /// exp["Address"] = "112 nowhere lane"; /// // strong /// var name = exp["StronglyTypedProperty"] as string; /// </summary> /// <remarks> /// The getter checks the Properties dictionary first /// then looks in PropertyInfo for properties. /// The setter checks the instance properties before /// checking the Properties dictionary. /// </remarks> /// <param name="key"></param> /// /// <returns></returns> public object this[string key] { get { try { // try to get from properties collection first return Properties[key]; } catch (KeyNotFoundException ex) { // try reflection on instanceType object result = null; if (GetProperty(Instance, key, out result)) return result; // nope doesn't exist throw; } } set { if (Properties.ContainsKey(key)) { Properties[key] = value; return; } // check instance for existance of type first var miArray = InstanceType.GetMember(key, BindingFlags.Public | BindingFlags.GetProperty); if (miArray != null && miArray.Length > 0) SetProperty(Instance, key, value); else Properties[key] = value; } } /// <summary> /// Returns and the properties of /// </summary> /// <param name="includeProperties"></param> /// <returns></returns> public IEnumerable<KeyValuePair<string,object>> GetProperties(bool includeInstanceProperties = false) { if (includeInstanceProperties && Instance != null) { foreach (var prop in this.InstancePropertyInfo) yield return new KeyValuePair<string, object>(prop.Name, prop.GetValue(Instance, null)); } foreach (var key in this.Properties.Keys) yield return new KeyValuePair<string, object>(key, this.Properties[key]); } /// <summary> /// Checks whether a property exists in the Property collection /// or as a property on the instance /// </summary> /// <param name="item"></param> /// <returns></returns> public bool Contains(KeyValuePair<string, object> item, bool includeInstanceProperties = false) { bool res = Properties.ContainsKey(item.Key); if (res) return true; if (includeInstanceProperties && Instance != null) { foreach (var prop in this.InstancePropertyInfo) { if (prop.Name == item.Key) return true; } } return false; } } } Although the Expando class supports an indexer, it doesn't actually implement IDictionary or even IEnumerable. It only provides the indexer and Contains() and GetProperties() methods, that work against the Properties dictionary AND the internal instance. The reason for not implementing IDictionary is that a) it doesn't add much value since you can access the Properties dictionary directly and that b) I wanted to keep the interface to class very lean so that it can serve as an entity type if desired. Implementing these IDictionary (or even IEnumerable) causes LINQ extension methods to pop up on the type which obscures the property interface and would only confuse the purpose of the type. IDictionary and IEnumerable are also problematic for XML and JSON Serialization - the XML Serializer doesn't serialize IDictionary<string,object>, nor does the DataContractSerializer. The JavaScriptSerializer does serialize, but it treats the entire object like a dictionary and doesn't serialize the strongly typed properties of the type, only the dictionary values which is also not desirable. Hence the decision to stick with only implementing the indexer to support the user["CustomProperty"] functionality and leaving iteration functions to the publicly exposed Properties dictionary. Note that the Dictionary used here is a custom PropertyBag class I created to allow for serialization to work. One important aspect for my apps is that whatever custom properties get added they have to be accessible to AJAX clients since the particular app I'm working on is a SIngle Page Web app where most of the Web access is through JSON AJAX calls. PropertyBag can serialize to XML and one way serialize to JSON using the JavaScript serializer (not the DCS serializers though). The key components that make Expando work in this code are the Properties Dictionary and the TryGetMember() and TrySetMember() methods. The Properties collection is public so if you choose you can explicitly access the collection to get better performance or to manipulate the members in internal code (like loading up dynamic values form a database). Notice that TryGetMember() and TrySetMember() both work against the dictionary AND the internal instance to retrieve and set properties. This means that user["Name"] works against native properties of the object as does user["Name"] = "RogaDugDog". What's your Use Case? This is still an early prototype but I've plugged it into one of my customer's applications and so far it's working very well. The key features for me were the ability to easily extend the type with values coming from a database and exposing those values in a nice and easy to use manner. I'm also finding that using this type of object for ViewModels works very well to add custom properties to view models. I suspect there will be lots of uses for this - I've been using the extra dictionary approach to extensibility for years - using a dynamic type to make the syntax cleaner is just a bonus here. What can you think of to use this for? Resources Source Code and Tests (GitHub) Also integrated in Westwind.Utilities of the West Wind Web Toolkit West Wind Utilities NuGet© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  .NET  Dynamic Types   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Can I install two Ubuntu versions on the same machine?

    - by Abh
    Hello, I have Ubuntu 10.10 32 bit already installed on my machine..I am using MongoDB and it does not work properly with 32 bit machine. So I want to install 64 bit Ubuntu 10.10 on my system on another partition (so that I can have both 32 bit and 64 bit versions). Is it okay to install both 32 bit and 64 bit? I mean will it give any problems? On which partition should I install the 64 bit version? My partitions are as follows: Filesystem Size Used Avail Use% Mounted on /dev/sda1 37G 11G 25G 30% / none 1.4G 260K 1.4G 1% /dev none 1.4G 776K 1.4G 1% /dev/shm none 1.4G 244K 1.4G 1% /var/run none 1.4G 0 1.4G 0% /var/lock /dev/sda6 129G 73G 50G 60% /home /dev/sda7 127G 76G 45G 64% /vol Waiting for your replies.

    Read the article

  • Why does my Grub have two entries for Windows?

    - by Tomas Lycken
    I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

    Read the article

  • Kernel Panic: Not booting after upgrade from 10.04 to 12.04

    - by Jitesh
    I upgraded from 10.04 to 12.04LTS. Upgrade went fine, even restarted couple of times. Then the next day while booting into Ubuntu, after the grub, it gave the error Kernel panic : not syncing vfs unable to mount root fs on unknown block (0,0). I then booted into live CD and tried the following commands, based on other posts on this forum: sudo fdisk -l As the 8 was on /dev/sda1, sudo mount /dev/sda1 /mnt sudo mount --bind /dev /mnt/dev Now I got the message: mount: mount point /mnt/dev does not exist Then tried sudo mount --bind /proc /mnt/proc Again got the message: mount point point /mnt/proc does not exist. then tried sudo chroot /mnt Got message: chroot: failed to run comman '/bin/bash': No such file or directory Now have no clue what to do next. Unable to boot into Ubuntu. Please help. Jitesh

    Read the article

  • Can't remove the libpcap0.8 package

    - by Yogesh
    I am getting error when running apt-get remove root@System:~/Downloads# sudo apt-get remove The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. and when I ran apt-get remove -f this is what happens: root@System:~/Downloads# sudo apt-get remove -f The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# clear root@System:~/Downloads# sudo apt-get remove -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# root@System:~/Downloads# sudo apt-get check Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. root@System:~/Downloads# apt-cache policy libpcap0.8:amd64 libpcap0.8 libpcap0.8-dev libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8-dev: Installed: 1.5.3-2 Candidate: 1.5.3-2 Version table: *** 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status root@System:~/Downloads# root@System:~/Downloads# sudo apt-get -f remove libpcap0.8 libpcap0.8-dev libpcap0.8-dev:i386 libpcap0.8:i386 Reading package lists... Done Building dependency tree Reading state information... Done Package 'libpcap0.8-dev:i386' is not installed, so not removed. Did you mean 'libpcap0.8-dev'? You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libpcap-dev : Depends: libpcap0.8-dev but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). root@System:~/Downloads# sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads#

    Read the article

  • Grub bootloader goes fail to boot in dual boot system after installing Ubuntu 12.10

    - by K.K Patel
    I had 12.04 with my dual boot system. Yesterday I downloaded Ubuntu 12.10 make bootable USB and choose Upgrade option in Installer. After installation Grub failed to boot my machine. I tried following to fix grub bootloder . Same problem I fixed with Ubuntu 12.04 using live USB but this solution not work for Ubuntu 12.10. Now coming at exactly where this solution goes fail. I followed this steps after booting Live USB and opening terminal. 1) sudo fdisk -l to see where Linux is installed 2) sudo mount /dev/sda9 /mnt where sda9 is my linux partition 3) sudo mount /dev/sda9 /mnt/boot 4) sudo mount --bind /dev /mnt/dev 5) sudo chroot /mnt (No problems with this steps done perfectly) 6) grub-install /dev/sda when I type command I got error that source_dir doesn't exist Please specify --target or --directory How can I solve this ?

    Read the article

  • Bridged virtual interface is not available or visible to ifconfig.

    - by Omniwombat
    Hello all. I'm running Ubuntu 9.04, kernel 2.6.28-18, and vmware-server 2.0.1. I'm attempting to setup a virtual linux machine to use a bridged interface rather than NAT or host-only. Both NAT and host-only work just fine. When running vmware-config.pl, I set /dev/vmnet0 to bridge eth0, /dev/vmnet1 to host-only, and /dev/vmnet8 to NAT. When I run ifconfig -a I see the physical interface (eth0), vmnet1 and vmnet8 both of which are up and have IP addresses assigned to them. I also see other various interfaces that are not relevant here. In the web console, when I ask that the guest machine's network card be bridged, it states that a bridged setup is "Not available" and shows the disabled device icon. Inside the guest machine, I do have an eth0 interface which I can set to anything I like, however it can't see my external network, or the host. I do see errors in my vmware/hostd.log which state: "The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network" which confirms the problem. vmnet-bridge is running, and I see the following in my process table: /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid -n 0 -i eth0 I confirm that the /var/run/vmnet-bridge-0.pid file is there and that it points to the correct process. I saw this question relating to Ubuntu 9.04 and bridged interfaces, in which the poster determined that the vsock library was not getting built due to a flaw in the vmware-config.pl script. I applied the patch, reran the script, and confirm that vsock.ko and vsock.o are in my /lib directory structure. vsock does show up in an lsmod. My /etc/vmware directory has /vmnet1 and /vmnet8 subdirectories. They contain configuration utilities for running DHCP and nat type services as expected. There is no vmnet0 subdirectory. My /etc/vmware/netmap.conf file DOES show entries for vmnet0; both the name and the device as I configured it from the script. My /dev directory contains devices vmnet0 through vmnet9. They have major device number 119, and minor device numbers 0 through 9. /proc/net/dev shows statistics for vmnet1 and vmnet8, but not vmnet0. I have a /proc/vmnet directory, but it's empty. When I start or stop the vmware service with /etc/init.d/vmware start, I see the following: Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done Nothing appears to be wrong there. What n00b thing am I doing such that vmnet0 and only vmnet0 does not show up in the interface list?

    Read the article

  • Error when trying to get movies off my Camera

    - by matt wilkie
    How do I retrieve movies and audio files from my Canon PowerShot S5 IS camera? Shotwell only sees the pictures. Mounting the camera via "Places Canon Digital Camera" and then clicking twice on the resulting desktop icon yields this error: could not display "gphoto2://[usb:001,002]/" There is nothing in /media. update: output of sudo fdisk -l Disk /dev/sda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ee33ee2 Device Boot Start End Blocks Id System /dev/sda1 2364 2612 1999872 82 Linux swap / Solaris /dev/sda2 * 1 2364 18979840 83 Linux /dev/sda3 2613 4864 18089159+ f W95 Ext'd (LBA) /dev/sda5 2613 4864 18089158+ b W95 FAT32 Partition table entries are not in disk order Solution: install gphotofs, then Nautilus shows camera contents similar to a standard usb storage device (though note that gphotofs does not yet support adding to or deleting contents).

    Read the article

  • How to access photos from my Genius G-Shot P7545 camera?

    - by Florin
    I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

    Read the article

  • Ubuntu Server 13.04.3 doesn't boot w/ EFI

    - by user1004816
    I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

    Read the article

  • Switch from encrypted partition to unencrypted (Error: cryptsetup: evms_activate is not available)

    - by Chris Lercher
    I initially installed Ubuntu 11.04 with an encrypted file system (from the alternate install CD: Guided Partitioning, LVM encrypted). Now I wanted to change this setup to have my root file system on an unencrypted partition. I had the following setup before: /dev/mapper/my-root on / type ext4 (rw,noatime,errors=remount-ro,commit=0,commit=0) /dev/sda1 on /boot type ext2 (rw,noatime) I backed up /, reformatted /dev/sda5 (which had contained the encrypted LVM device) to an ext3 partition, and restored / to that partition. I edited /etc/fstab, removed the line /dev/mapper/my-root / ..., and added the line: /dev/sda5 / ext3 noatime,rw,errors=remount-ro,commit=0 0 1 I edited /etc/crypttab, and commented out the single entry. On reboot, I get the grub screen as usual, but then I get the message cryptsetup:evms_activate is not available, waiting for encrypted source device. I tried reinstalling Grub2 using a LiveCD with the ChRoot method, but that didn't make any difference. Why is Ubuntu still searching for an encrypted device?

    Read the article

  • Can't see my partitions after grub recovery

    - by dimbo
    I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

    Read the article

  • Subdomain redirects to different server, maintaining original URL

    - by Jason Baker
    I just took over the webmaster position in my organization, and I'm trying to set up a development environment separate from the production environment. The two environments are hosted with different companies, both on shared hosting plans. Right now, production is at domain.com and development is at domain2.com What I want is to direct my development team to dev.domain.com More importantly, I don't want the URL to change from dev.domain.com back to domain2.com, but I also be responsive to page changes. For example, if my dev team navigates from dev.domain.com to a page (called "page"), I'd like the URL to show as dev.domain.com/page Is this possible, or am I just dreaming?

    Read the article

  • Mounting ntfs windows drive and retrieving its data

    - by Sarmad
    Hej, A friend gave me his laptop which had problems with booting (windows). He claims his data on the drive to be retrieved and saved. I have Linux Ubuntu Server to mount its hard drive and check the contents. Now when I have mounted it I see only boot.sdi, sources, System Volume Information I have no idea why is it so? How can I access and retrieve the contents? results of sudo fdisk -l are as follows: Enhet Start Början Slut Block Id System /dev/sdb1 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sdb2 * 3074048 246945791 121935872 7 HPFS/NTFS/exFAT /dev/sdb3 246945792 416354295 84704252 7 HPFS/NTFS/exFAT /dev/sdb4 416354304 488394751 36020224 f W95 Utökad (LBA) /dev/sdb5 416356352 488394751 36019200 7 HPFS/NTFS/exFAT Please help me in this regard.

    Read the article

  • Reconstructing the disk order in RAID 6 with 7 disks

    - by rkotulla
    a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

    Read the article

  • Grub2 with BURG: duplicate Windows entries, how do I remove one?

    - by Tomas Lycken
    I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

    Read the article

  • How to correctly set permisions for all subfolders and files

    - by Saeid87
    I am following the guide to install TinyOS on Ubuntu 12.04 I have done up to step 3, But I am not sure if I have done the step 3 correctly. Because by doing the step 4 I get the permission error : saeid@saeid-Satellite-C660:~$ tos-install-jni /usr/bin/tos-install-jni: 13: [: =: unexpected operator Installing 32-bit Java JNI code in /usr/lib/jvm/java-6-openjdk-i386/jre/lib/i386 ... install: cannot create regular file `/usr/lib/jvm/java-6-openjdk-i386/jre/lib/i386/libgetenv.so': Permission denied Can you please tell me what would be the actual commands for step 3? What I have to replace with following lines?: /opt/tinyos-2.x files: chown -R /opt/tinyos-2.x Change the permissions on any serial (/dev/ttyS), usb (/dev/tts/usb, /dev/ttyUSB), or parallel (/dev/parport) devices you are going to use: chmod 666 /dev/ I mean how would you do those steps in your ubuntu?

    Read the article

  • Ubiquity is not recognizing existing partition while trying to install Ubuntu alongside Windows 7

    - by Bertner
    So I'm using Ubuntu live CD to install Ubuntu next to Windows 7 but it doesn't recognize partitions. Here is sudo fdisk -l: Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0c7a859b Device Boot Start End Blocks Id System /dev/sda1 63 1250259631 625129784+ f W95 Ext'd (LBA) Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 4177919 2048000 b W95 FAT32 /dev/sda3 4177920 147535871 71678976 7 HPFS/NTFS/exFAT /dev/sda5 147538608 1147859631 500160512 7 HPFS/NTFS/exFAT I have one partition with Windows 7, one with its created partition (OS) and one for data.

    Read the article

  • Unable to mount Windows (NTFS) filesystem due to hibernation

    - by yotamoo
    Whenever I boot Ubuntu, I get a message that it cannot mount my windows partition, and I can choose to either wait, skip or manually mount. When I try to enter my Windows partition through Nautilus I get a message saying that this partition is hibernated and that I need to enter the file system and properly close it, something I have done with no problem so I don't know why this happens. Here's my partition table, if any more data is needed please let me know. Device Boot Start End Blocks Id System /dev/sda1 2048 20000767 9999360 83 Linux /dev/sda2 20002814 478001151 228999169 5 Extended /dev/sda3 * 478001152 622532607 72265728 7 HPFS/NTFS/exFAT /dev/sda4 622532608 625141759 1304576 82 Linux swap / Solaris /dev/sda5 20002816 478001151 228999168 83 Linux

    Read the article

  • cryptsetup partitions not detected at boot

    - by Luis
    I installed a fresh 12.04 and tried to mimic what I had for 10.04. swap should be encrypted with a urandom key and there's another partition that will contain home and other directories. # cat /etc/crypttab | grep -v '^#' | grep -v '^$' cryptswap /dev/sda5 /dev/urandom swap encriptado /dev/sda6 # grep -e 'cryptswap' -e 'encriptado' /etc/fstab /dev/mapper/cryptswap swap swap defaults 0 0 /dev/mapper/encriptado /encriptado ext4 defaults 0 0 I also apt-get install cryptsetup When I boot, the system says (try to translate) that either the partition is not found or is not ready. I should wait, press M for manual or S to jump over. What am I missing here?

    Read the article

  • CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

    - by slashdot
    So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >