Search Results

Search found 3489 results on 140 pages for 'clock rate'.

Page 52/140 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Oracle 11g Data Guard over a WAN

  - by Dave LeJeune

  Hi - We are in process of looking at using Oracle's Data Guard to replicate our 11g instance from a colo facility in Washington DC to Chicago. To give some basics we have approximately 25TB of storage and a healthy transaction rate in the 1-2K/sec range. Also, because we are processing data in real-time we have a 24x7x365 requirement for processing data. We don't have any respites as far as volume except for system upgrades (once every few months) where we take the system offline but then course experience a spike in transactions when we bring the system back on-line. Ideally we would want the second instance in the DG configuration semi-online in a read-only fashion for reports/etc. We evaluated DG in 10g and were not overly impressed and research seemed to show that earlier versions had issues with replication over a WAN but I have heard good things about modifications the product has gone through w/ 11g. Can anyone confirm an instance of this size and transaction rate being replicated over a WAN and if so what is the general latency? An information or experiences with a DG implementation that is of this size and scope would really be helpful (or larger - I also realize we are still relatively small compared to many others out there). Many thanks in advance.

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• ffmpeg - creating DNxHD MFX files with alphas

  - by Hugh

  I'm struggling with something in FFMpeg at the moment... I'm trying to make DNxHD 1080p/24, 36Mb/s MXF files from a sequence of PNG files. My current command-line is: ffmpeg -y -f image2 -i /tmp/temp.%04d.png -s 1920x1080 -r 24 -vcodec dnxhd -f mxf -pix_fmt rgb32 -b 36Mb /tmp/temp.mxf To which ffmpeg gives me the output: Input #0, image2, from '/tmp/temp.%04d.png': Duration: 00:00:01.60, start: 0.000000, bitrate: N/A Stream #0.0: Video: png, rgb32, 1920x1080, 25 tbr, 25 tbn, 25 tbc Output #0, mxf, to '/tmp/temp.mxf': Stream #0.0: Video: dnxhd, yuv422p, 1920x1080, q=2-31, 36000 kb/s, 90k tbn, 24 tbc Stream mapping: Stream #0.0 -> #0.0 [mxf @ 0x1005800]unsupported video frame rate Could not write header for output file #0 (incorrect codec parameters ?) There are a few things in here that concern me: The output stream is insisting on being yuv422p, which doesn't support alpha. 24fps is an unsupported video frame rate? I've tried 23.976 too, and get the same thing. I then tried the same thing, but writing to a quicktime (still DNxHD, though) with: ffmpeg -y -f image2 -i /tmp/temp.%04d.png -s 1920x1080 -r 24 -vcodec dnxhd -f mov -pix_fmt rgb32 -b 36Mb /tmp/temp.mov This gives me the output: Input #0, image2, from '/tmp/1274263259.28098.%04d.png': Duration: 00:00:01.60, start: 0.000000, bitrate: N/A Stream #0.0: Video: png, rgb32, 1920x1080, 25 tbr, 25 tbn, 25 tbc Output #0, mov, to '/tmp/1274263259.28098.mov': Stream #0.0: Video: dnxhd, yuv422p, 1920x1080, q=2-31, 36000 kb/s, 90k tbn, 24 tbc Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop encoding frame= 39 fps= 9 q=1.0 Lsize= 7177kB time=1.62 bitrate=36180.8kbits/s video:7176kB audio:0kB global headers:0kB muxing overhead 0.013636% Which obviously works, to a certain extent, but still has the issue of being yuv422p, and therefore losing the alpha. If I'm going to QuickTime, then I can get what I need using Shake, but my main aim here is to be able to generate .mxf files. Any thoughts? Thanks

  Read the article

• Matched or unmatched drives for RAID arrays?

  - by Will

  Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

  Read the article

• How can I write an excel formula to do row based calculations; where certain conditions need to be met?

  - by BDY

  I am given: An excel sheet contains around 200 tasks (described in rows 2-201 in Column A). Each task can be elegible for a max of two projects (There are 4 projects in total, called "P1-P4" - drop down lists in Columns B and D); and this with a specific %-rate allocation (columns C & E - Column C refers to the Project Column B, and Column E refers to the Project in Column D). Column F shows the amount of work days spent on each task. Example in row 2: Task 1 (Column A); P1 (Column B) ; 80% (Column C) ; P3 (Column D) ; 20% (Column E) ; 3 (Column F) I need to know the sum of the working days spent on Project P3 respecting the %-rate for elegibility. I know how to calculate it for each Task (each Row) - e.g. for Task 1: =IF(B2="P3";C2*F2)+IF(D2="P3";E2*F2) However instead of repeating this for each task, I need a formula that adds them all together. Unfortunately the following formula shows me an error: =IF(B2:B201="P3";C2:C201*F2:F201)+IF(D2:D201="P3";E2:E201*F2:F201) Can anyone help please? Thank you!!

  Read the article

• C# inaccurate timer?

  - by Ivan

  Hi there, I'm developing an application and I need to get the current date from a server (it differs from the machine's date). I receive the date from the server and with a simple Split I create a new DateTime: globalVars.fec = new DateTime(DateTime.Now.Year, DateTime.Now.Month, DateTime.Now.Day, int.Parse(infoHour[0]), int.Parse(infoHour[1]), int.Parse(infoHour[2])); globalVars is a class and fec is a public static variable so that I can access it anywhere in the application (bad coding I know...). Now I need to have a timer checking if that date is equal to some dates I have stored in a List and if it is equal I just call a function. List<DateTime> fechas = new List<DateTime>(); Before having to obtain the date from a server I was using computer's date, so to check if the dates matched I was using this: private void timerDatesMatch_Tick(object sender, EventArgs e) { DateTime tick = DateTime.Now; foreach (DateTime dt in fechas) { if (dt == tick) { //blahblah } } } Now I have the date from the server so DateTime.Now can't be used here. Instead I have created a new timer with Interval=1000 and on tick I'm adding 1 second to globalVars.fec using: globalVars.fec = globalVars.fec.AddSeconds(1); But the clock isn't accurate and every 30 mins the clock loses about 30 seconds. Is there another way of doing what I'm trying to do? I've thought about using threading.timer instead but I need to have access to other threads and non-static functions. Thanks in advance, Ivan

  Read the article

• UiModeManager - NightMode (FroYo)

  - by Kaloer

  Hi there, I have been trying to turn off the buttons' light in my application using the UiModeManager's nightmode function. The default Desk Clock application (Nexus One) turns off the buttons' light when it is dimmed, and I want to do this as well. I've tried using the following code: UiModeManager mgr = (UiModeManager) getSystemService(UI_MODE_SERVICE); mgr.setNightMode(UiModeManager.MODE_NIGHT_YES); The UiModeManager.setNightMode(int mode) documentation says this: Sets the night mode. Changes to the night mode are only effective when the car or desk mode is enabled on a device. Does that mean that the device has to be physically in a desk dock? I can set the device to car mode using the UiModeManager.enableCarMode(int flags) method. This works fine, but it doesn't turn off the lights, it only dims the screen's backlight. Is there a way to set the device into desk mode without using a physical desk dock? As the FroYo source code is not yet released, I cannot look at the build-in Desk Clock application. Thanks in advantage.

  Read the article

• C# unaccurate timer?

  - by Ivan

  Hi there, I'm developing an application and I need to get the current date from a server (it differs from the machine's date). I receive the date from the server and with a simple Split I create a new DateTime: globalVars.fec = new DateTime(DateTime.Now.Year, DateTime.Now.Month, DateTime.Now.Day, int.Parse(infoHour[0]), int.Parse(infoHour[1]), int.Parse(infoHour[2])); globalVars is a class and fec is a public static variable so that I can access it anywhere in the application (bad coding I know...). Now I need to have a timer checking if that date is equal to some dates I have stored in a List and if it is equal I just call a function. List<DateTime> fechas = new List<DateTime>(); Before having to obtain the date from a server I was using computer's date, so to check if the dates matched I was using this: private void timerDatesMatch_Tick(object sender, EventArgs e) { DateTime tick = DateTime.Now; foreach (DateTime dt in fechas) { if (dt == tick) { //blahblah } } } Now I have the date from the server so DateTime.Now can't be used here. Instead I have created a new timer with Interval=1000 and on tick I'm adding 1 second to globalVars.fec using: globalVars.fec = globalVars.fec.AddSeconds(1); But the clock isn't accurate and every 30 mins the clock loses about 30 seconds. Is there another way of doing what I'm trying to do? I've thought about using threading.timer instead but I need to have access to other threads and non-static functions. Thanks in advance, Ivan

  Read the article

• Daylight saving time - do and don'ts

  - by Oded

  I am hoping to make this question and the answers to it the definitive guide to dealing with daylight saving time, in particular for dealing with the actual change overs. Many systems are dependent on keeping accurate time, the problem is with changes to time due to daylight savings - moving the clock forward or backwards. For instance, one has business rules in an order taking system that depend on the time of the order - if the clock changes, the rules might not be as clear. How should the time of the order be persisted? There is of course an endless number of scenarios - this one is simply an illustrative one. How have you dealt with the daylight saving issue? What assumptions are part of your solution? (looking for context here) As important, if not more so: What did you try that did not work? Why did it not work? I would be interested in programming, OS, data persistence and other pertinent aspects of the issue. General answers are great, but I would also like to see details especially if they are only available on one platform.

  Read the article

• Date from String using NSDateFormatter regardless 12h-24h setting

  - by maxf99

  Hello everybody, Today my question is about date formats and strings. My application downloads some strings representing dates from the internet. The date format is always like this: "2010-05-24 at 20:45" I need to convert this string into an NSDate object in order to perform some date manipulations. I tried this code: NSString * dateString = @"2010-05-24 at 20:45" // actually downloaded from the internet NSDateFormatter * myDateFormatter = [[NSDateFormatter alloc] init]; [myDateFormatter setDateFormat:@"yyyy-MM-dd 'at' HH:mm"]; NSDate * dateFromString = [myDateFormatter dateFromString:dateString]; This seems to work perfectly fine as long as the iPhone is set to 24h clock. As long as I switch to 12h clock in the general settings the NSDate object is not created (and the application happily crashes) I have read others having similar problems but I don't seem to find a solution. Now the questions: It doesn't make sense to me that the NSDateFormatter is sensible to user settings as long as I am specifying which format it is supposed to use to parse the string (which is not modifiable because it comes from the web), what's the use of checking user settings? More important, how can I get my task performed (to get an NSDate object from the string regardless the user settings)?

  Read the article

• How to stop tcpdump remotely using expect from a new telnet session

  - by The CodeWriter

  I am trying to stop the tcpdump command from running on a remote terminal. If I telnet to the terminal, start tcpdump, and then send a ^c, tcpdump stops with no issues. However if I telnet to the same terminal, start tcpdump, and then exit the telnet session, when I reconnect to the same telnet session I am unable to stop tcpdump via a ^c. When I do this instead of stopping tcpdump it seems that it just quits the telnet session and tcpdump continues to run on the remote terminal. I provided my script below. Any help is greatly appreciated. #!/usr/local/bin/expect -f exp_internal 1 set timeout 30 spawn /bin/bash expect "] " send "telnet 192.168.62.133 10006\r" expect "Escape character is '^]'." send "\r" expect "# " set now [clock format [clock seconds] -format {%d_%b_%Y_%H%M%S}] set command "tcpdump -vv -i trf400 ip proto 89 -s 65535 -w /tmp/test_term420_${now}.pcp " send "$command\r" expect "tcpdump: listening on" # This works correctly. tcpdump quits and I am returned to the expected prompt send "\x03" expect "# " send "$command\r" expect "tcpdump: listening on" # Exit telnet session send -- "\x1d" expect "telnet> " send -- "q\r" expect "] " # Reconnect to telnet session send "telnet 192.168.62.133 10006\r" expect "Escape character is '^]'." send "\r" # This does not work as intended. The ^c quits the telnet session instead of stopping tcpdump send "\x03" expect "] " send "ls\r" expect "] "

  Read the article

• iOS 5 Audio Alarms Don't Sound Without kAudioSessionProperty_OverrideCategoryMixWithOthers On

  - by coneybeare

  I have an audio app that is having some problems with the way iOS 5 has changed audio behaviors. When my app's audio is playing (AVAudioSessionCategoryPlayback), and a Clock.app alarm or timer is fired from the OS, the UIAlertView notification pops up, but without the audio alert. My application sound ducks fine to get out of the way of the audio alert, but the alarm app's audio alert does not sound. Naturally, tons of support requests poured in over the iOS 5 change. I have solved this temporarily by setting kAudioSessionProperty_OverrideCategoryMixWithOthers which lets the alarm audio come through, but there are a few very undesirable side-effects when doing this: Other app's audio can play with/over mine. The remote control events are not routed to my app, but to iPod.app. None of the above drawbacks are acceptable for my app's requirements. I have been hacking away at this for some time now but haven't been able to crack it. How can I setup my audio such that: My app's audio still uses the AVAudioSessionCategoryPlayback category for background audio. The Clock.app alarms still have their audio alerts make sound The app still responds to remote control notifications

  Read the article

• Timer a usage in msp430 in high compiler optimization mode

  - by Vishal

  Hi, I have used timer A in MSP430 with high compiler optimization, but found that my timer code is failing when high compiler optimization used. When none optimization is used code works fine. This code is used to achieve 1 ms timer tick. timeOutCNT is increamented in interrupt. Following is the code, //Disable interrupt and clear CCR0 TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK TIMER_A_ID | // set the divider to 8 TACLR | // clear the timer MC_1; // continuous mode TIMER_A_TACTL &= ~TIMER_A_TAIE; // timer interrupt disabled TIMER_A_TACTL &= 0; // timer interrupt flag disabled CCTL0 = CCIE; // CCR0 interrupt enabled CCR0 = 500; TIMER_A_TACTL &= TIMER_A_TAIE; //enable timer interrupt TIMER_A_TACTL &= TIMER_A_TAIFG; //enable timer interrupt TACTL = TIMER_A_TASSEL + MC_1 + ID_3; // SMCLK, upmode timeOutCNT = 0; //timeOutCNT is increased in timer interrupt while(timeOutCNT <= 1); //delay of 1 milisecond TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK TIMER_A_ID | // set the divider to 8 TACLR | // clear the timer MC_1; // continuous mode TIMER_A_TACTL &= ~TIMER_A_TAIE; // timer interrupt disabled TIMER_A_TACTL &= 0x00; // timer interrupt flag disabled Can anybody help me here to resolve this issue? Is there any other way we can use timer A so it works fine in optimization modes? Or do I have used is wrongly to achieve 1 ms interrupt? Thanks in advanced. Vishal N

  Read the article

• My timer code is failing when IAR is configured to do max optimization

  - by Vishal

  Hi, I have used timer A in MSP430 with high compiler optimization, but found that my timer code is failing when high compiler optimization used. When none optimization is used code works fine. This code is used to achieve 1 ms timer tick. timeOutCNT is increamented in interrupt. Following is the code [Code] //Disable interrupt and clear CCR0 TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK TIMER_A_ID | // set the divider to 8 TACLR | // clear the timer MC_1; // continuous mode TIMER_A_TACTL &= ~TIMER_A_TAIE; // timer interrupt disabled TIMER_A_TACTL &= 0; // timer interrupt flag disabled CCTL0 = CCIE; // CCR0 interrupt enabled CCR0 = 500; TIMER_A_TACTL &= TIMER_A_TAIE; //enable timer interrupt TIMER_A_TACTL &= TIMER_A_TAIFG; //enable timer interrupt TACTL = TIMER_A_TASSEL + MC_1 + ID_3; // SMCLK, upmode timeOutCNT = 0; //timeOutCNT is increased in timer interrupt while(timeOutCNT <= 1); //delay of 1 milisecond TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK TIMER_A_ID | // set the divider to 8 TACLR | // clear the timer MC_1; // continuous mode TIMER_A_TACTL &= ~TIMER_A_TAIE; // timer interrupt disabled TIMER_A_TACTL &= 0x00; // timer interrupt flag disabled [/code] Can anybody help me here to resolve this issue? Is there any other way we can use timer A so it works fine in optimization modes? Or do I have used is wrongly to achieve 1 ms interrupt? Thanks in advanced. Vishal N

  Read the article

• Unexpected performance curve from CPython merge sort

  - by vkazanov

  I have implemented a naive merge sorting algorithm in Python. Algorithm and test code is below: import time import random import matplotlib.pyplot as plt import math from collections import deque def sort(unsorted): if len(unsorted) <= 1: return unsorted to_merge = deque(deque([elem]) for elem in unsorted) while len(to_merge) > 1: left = to_merge.popleft() right = to_merge.popleft() to_merge.append(merge(left, right)) return to_merge.pop() def merge(left, right): result = deque() while left or right: if left and right: elem = left.popleft() if left[0] > right[0] else right.popleft() elif not left and right: elem = right.popleft() elif not right and left: elem = left.popleft() result.append(elem) return result LOOP_COUNT = 100 START_N = 1 END_N = 1000 def test(fun, test_data): start = time.clock() for _ in xrange(LOOP_COUNT): fun(test_data) return time.clock() - start def run_test(): timings, elem_nums = [], [] test_data = random.sample(xrange(100000), END_N) for i in xrange(START_N, END_N): loop_test_data = test_data[:i] elapsed = test(sort, loop_test_data) timings.append(elapsed) elem_nums.append(len(loop_test_data)) print "%f s --- %d elems" % (elapsed, len(loop_test_data)) plt.plot(elem_nums, timings) plt.show() run_test() As much as I can see everything is OK and I should get a nice N*logN curve as a result. But the picture differs a bit: Things I've tried to investigate the issue: PyPy. The curve is ok. Disabled the GC using the gc module. Wrong guess. Debug output showed that it doesn't even run until the end of the test. Memory profiling using meliae - nothing special or suspicious. ` I had another implementation (a recursive one using the same merge function), it acts the similar way. The more full test cycles I create - the more "jumps" there are in the curve. So how can this behaviour be explained and - hopefully - fixed? UPD: changed lists to collections.deque UPD2: added the full test code UPD3: I use Python 2.7.1 on a Ubuntu 11.04 OS, using a quad-core 2Hz notebook. I tried to turn of most of all other processes: the number of spikes went down but at least one of them was still there.

  Read the article

• performance of large number calculations in python (python 2.7.3 and .net 4.0)

  - by g36

  There is a lot of general questions about python performance in comparison to other languages. I've got more specific example: There are two simple functions wrote in python an c#, both checking if int number is prime. python: import time def is_prime(n): num =n/2 while num >1: if n % num ==0: return 0 num-=1 return 1 start = time.clock() probably_prime = is_prime(2147483629) elapsed = (time.clock() - start) print 'time : '+str(elapsed) and C#: using System.Diagnostics; public static bool IsPrime(int n) { int num = n/2; while(num >1) { if(n%num ==0) { return false; } num-=1; } return true; } Stopwatch sw = new Stopwatch(); sw.Start(); bool result = Functions.IsPrime(2147483629); sw.Stop(); Console.WriteLine("time: {0}", sw.Elapsed); And times ( which are surprise for me as a begginer in python:)): Python: 121s; c#: 6s Could You explain where does this big diffrence come from ?

  Read the article

• verilog / systemverilog -- What is the behavior of blocking statements across two always blocks?

  - by miles.sherman

  I am wondering about the behavior of the below code. There are two always blocks, one is combinational to calculate the next_state signal, the other is sequential which will perform some logic and determine whether or not to shutdown the system. It does this by setting the shutdown_now signal high and then calling state <= next_state. My question is if the conditions become true that the shutdown_now signal is set (during clock cycle n) in a blocking manner before the state <= next_state line, will the state during clock cycle n+1 be SHUTDOWN or RUNNING? In other words, does the shutdown_now = 1'b1 line block across both state machines since the state signal is dependent on it through the next_state determination? enum {IDLE, RUNNING, SHUTDOWN} state, next_state; logic shutdown_now; // State machine (combinational) always_comb begin case (state) IDLE: next_state <= RUNNING; RUNNING: next_state <= shutdown ? SHUTDOWN : RUNNING; SHUTDOWN: next_state <= SHUTDOWN; default: next_state <= SHUTDOWN; endcase end // Sequential Behavior always_ff @ (posedge clk) begin // Some code here if (/*some condition) begin shutdown_now = 1'b0; end else begin shutdown_now = 1'b1; end state <= next_state; end

  Read the article

• Understanding an interesting array update/replace function

  - by dave

  I'm a PHP amateur. This array function is an adaption of a function I noticed while reading this article. I thought this was an interesting type of array function, but I have a question about the way it works. my_func( array( 'sky' => 'blue' ) ); function my_func( array $settings = array() ) { $settings = $settings + array( 'grass'=>'green','sky'=>'dark' ); print_r( $settings ) ; // outputs: Array ( [sky] => blue [grass] => green ) } but..................... my_func( array( 'sky' => 'blue' ) ); function my_func( array $settings = array() ) { $settings = array( 'clock'=>'time' ) ; $settings = $settings + array( 'grass'=>'green','sky'=>'dark' ); print_r( $settings ) ; // outputs: Array ( [clock] => time [grass] => green [sky] => dark ) } Why does [sky] not equal 'blue' in the second instance? Thanks.

  Read the article

• Monitor web sites visited using Internet Explorer, Opera, Chrome, Firefox and Safari in Python

  - by Zachary Brown

  I am working on a project for work and have seemed to run into a small problem. The project is a similar program to Web Nanny, but branded to my client's company. It will have features such as website blocking by URL, keyword and web activity logs. I would also need it to be able to "pause" downloads until an acceptable username and password is entered. I found a script to monitor the URL visited in Internet Explorer (shown below), but it seems to slow the browser down considerably. I have not found any support or ideas onhow to implement this in other browsers. So, my questions are: 1). How to I monitor other browser activity / visited URLs? 2). How do I prevent downloading unless an acceptable username and password is entered? from win32com.client import Dispatch,WithEvents import time,threading,pythoncom,sys stopEvent=threading.Event() class EventSink(object): def OnNavigateComplete2(self,*args): print "complete",args stopEvent.set() def waitUntilReady(ie): if ie.ReadyState!=4: while 1: print "waiting" pythoncom.PumpWaitingMessages() stopEvent.wait(.2) if stopEvent.isSet() or ie.ReadyState==4: stopEvent.clear() break; time.clock() ie=Dispatch('InternetExplorer.Application',EventSink) ev=WithEvents(ie,EventSink) ie.Visible=1 ie.Navigate("http://www.google.com") waitUntilReady(ie) print "location",ie.LocationName ie.Navigate("http://www.aol.com") waitUntilReady(ie) print "location",ie.LocationName print ie.LocationName,time.clock() print ie.ReadyState

  Read the article

• C# vs C - Big performance difference

  - by John

  I'm finding massive performance differences between similar code in C anc C#. The C code is: #include <stdio.h> #include <time.h> #include <math.h> main() { int i; double root; clock_t start = clock(); for (i = 0 ; i <= 100000000; i++){ root = sqrt(i); } printf("Time elapsed: %f\n", ((double)clock() - start) / CLOCKS_PER_SEC); } And the C# (console app) is: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication2 { class Program { static void Main(string[] args) { DateTime startTime = DateTime.Now; double root; for (int i = 0; i <= 100000000; i++) { root = Math.Sqrt(i); } TimeSpan runTime = DateTime.Now - startTime; Console.WriteLine("Time elapsed: " + Convert.ToString(runTime.TotalMilliseconds/1000)); } } } With the above code, the C# completes in 0.328125 seconds (release version) and the C takes 11.14 seconds to run. The c is being compiled to a windows executable using mingw. I've always been under the assumption that C/C++ were faster or at least comparable to C#.net. What exactly is causing the C to run over 30 times slower? EDIT: It does appear that the C# optimizer was removing the root as it wasn't being used. I changed the root assignment to root += and printed out the total at the end. I've also compiled the C using cl.exe with the /O2 flag set for max speed. The results are now: 3.75 seconds for the C 2.61 seconds for the C# The C is still taking longer, but this is acceptable

  Read the article

• assembly of pdp-11(simulator)

  - by lego69

  I have this code on pdp-11 tks = 177560 tkb = 177562 tps = 177564 tpb = 177566 lcs = 177546 . = torg + 2000 main: mov #main, sp mov #kb_int, @#60 mov #200, @#62 mov #101, @#tks mov #clock, @#100 mov #300, @#102 mov #100, @#lcs loop: mov @#tks,r2 aslb r2 bmi loop halt clock: tst bufferg beq clk_end mov #msg,-(sp) jsr pc, print_str tst (sp)+ clr bufferg bic #100,@#tks clr @#lcs clk_end:rti kb_int: mov r1,-(sp) jsr pc, read_char movb r1,@buff_ptr inc buff_ptr bis #1,@#tks cmpb r1,#'q bne next_if mov #0, @#tks next_if:cmpb r1,#32. bne end_kb_int clrb @buff_ptr mov #buffer,-(sp) jsr pc, print_str tst (sp)+ mov #buffer,buff_ptr end_kb_int: mov (sp)+,r1 rti ;############################# read_char: tstb @#tks bpl read_char movb @#tkb, r1 rts pc ;############################# print_char: tstb @#tps bpl print_char movb r1, @#tpb rts pc ;############################# print_str: mov r1,-(sp) mov r2,-(sp) mov 6(sp),r2 str_loop: movb (r2)+,r1 beq pr_str_end jsr pc, print_char br str_loop pr_str_end: mov (sp)+,r2 mov (sp)+,r1 rts pc . = torg + 3000 msg:.ascii<Something is wrong!> .byte 0 .even buff_ptr: .word buffer buffer: .blkw 3 bufferg: .word 0 Can somebody please explain how this part is working, thanks in advance movb r1,@buff_ptr inc buff_ptr bis #1,@#tks cmpb r1,#'q bne next_if mov #0, @#tks next_if:cmpb r1,#32. bne end_kb_int clrb @buff_ptr mov #buffer,-(sp) jsr pc, print_str tst (sp)+ mov #buffer,buff_ptr

  Read the article

• Rewriting a for loop in pure NumPy to decrease execution time

  - by Statto

  I recently asked about trying to optimise a Python loop for a scientific application, and received an excellent, smart way of recoding it within NumPy which reduced execution time by a factor of around 100 for me! However, calculation of the B value is actually nested within a few other loops, because it is evaluated at a regular grid of positions. Is there a similarly smart NumPy rewrite to shave time off this procedure? I suspect the performance gain for this part would be less marked, and the disadvantages would presumably be that it would not be possible to report back to the user on the progress of the calculation, that the results could not be written to the output file until the end of the calculation, and possibly that doing this in one enormous step would have memory implications? Is it possible to circumvent any of these? import numpy as np import time def reshape_vector(v): b = np.empty((3,1)) for i in range(3): b[i][0] = v[i] return b def unit_vectors(r): return r / np.sqrt((r*r).sum(0)) def calculate_dipole(mu, r_i, mom_i): relative = mu - r_i r_unit = unit_vectors(relative) A = 1e-7 num = A*(3*np.sum(mom_i*r_unit, 0)*r_unit - mom_i) den = np.sqrt(np.sum(relative*relative, 0))**3 B = np.sum(num/den, 1) return B N = 20000 # number of dipoles r_i = np.random.random((3,N)) # positions of dipoles mom_i = np.random.random((3,N)) # moments of dipoles a = np.random.random((3,3)) # three basis vectors for this crystal n = [10,10,10] # points at which to evaluate sum gamma_mu = 135.5 # a constant t_start = time.clock() for i in range(n[0]): r_frac_x = np.float(i)/np.float(n[0]) r_test_x = r_frac_x * a[0] for j in range(n[1]): r_frac_y = np.float(j)/np.float(n[1]) r_test_y = r_frac_y * a[1] for k in range(n[2]): r_frac_z = np.float(k)/np.float(n[2]) r_test = r_test_x +r_test_y + r_frac_z * a[2] r_test_fast = reshape_vector(r_test) B = calculate_dipole(r_test_fast, r_i, mom_i) omega = gamma_mu*np.sqrt(np.dot(B,B)) # write r_test, B and omega to a file frac_done = np.float(i+1)/(n[0]+1) t_elapsed = (time.clock()-t_start) t_remain = (1-frac_done)*t_elapsed/frac_done print frac_done*100,'% done in',t_elapsed/60.,'minutes...approximately',t_remain/60.,'minutes remaining'

  Read the article

• Runnable to be run every second only runs once in Fragment onCreateView()

  - by jul

  I'm trying to update the time in a TextView with a Runnable supposed to be run every second. The Runnable is started from a Fragment's onCreateView(), but it's only executed once. Anybody can help? Thanks public class MyFragment extends Fragment { Calendar mCalendar; private Runnable mTicker; private Handler mHandler; TextView mClock; String mFormat; private boolean mClockStopped = false; @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { RelativeLayout view = (RelativeLayout) inflater.inflate(R.layout.meteo_widget, container, false); /* * Clock (from DigitalClock widget source) */ mClock = (TextView) view.findViewById(R.id.clock); mCalendar = Calendar.getInstance(); mHandler = new Handler(); mTicker = new Runnable() { public void run() { if(mClockStopped) return; mCalendar.setTimeInMillis(System.currentTimeMillis()); mClock.setText(DateFormat.format("hh:mm:ss", mCalendar)); mClock.invalidate(); long now = SystemClock.uptimeMillis(); long next = now + (1000 - now % 1000); mHandler.postAtTime(mTicker, next); } }; mTicker.run(); return view; } @Override public void onResume() { super.onResume(); mClockStopped = true; } @Override public void onPause() { mClockStopped = false; super.onPause(); } }

  Read the article

• Conversion from C code to CudaC code I get unpredictable results

  - by Abhi

  include include include include define pi 3.14159265359 lo*lo*p-2*mu,freq=2.25*1e6,wavelength=(long double)lo/freq,dh=(long double)wavelength/ 30.0,dt=(long double)dh/(lo*1.5); (1000*dh)); (p*dh),lambdaplus2mudtbydh=(lambda+2*mu)*dt/dh,lambdadtbydh=lambda*dt/dh,dtmubydh=dt*mu/ dh; double**U,long double**V){ for(int k=0,l=0;k<=yno-1 && l<=yno;k++,l++){ U[i+1][l]+=dtbyrhodh*(X[i+1][l+1]-X[i+1][l]+Z[i+1][l]- Z[i][l]); [k+1]-Y[j][k+1]); } double**U,long double**V){ for(int k=0,l=0;k<=yno-1 && l<=yno;k++,l++){ U[i+1][k])+lambdadtbydh*(V[i+1][k+1]-V[i][k+1]); V[i][k+1])+lambdadtbydh*(U[i+1][k+1]-U[i+1][k]); U[j][l]); int main(){ clock_t start,end; long double time_taken; start=clock(); long double **X,**Y,**U,**V,**Z;int n=1; X=Make2DDoubleArray(xno+2,yno+2); Y=Make2DDoubleArray(xno+2,yno+2); Z=Make2DDoubleArray(xno+1,yno+1); U=Make2DDoubleArray(xno+2,yno+2); V=Make2DDoubleArray(xno+2,yno+2); for (n=1;n<=timesteps;n++){ } end=clock(); time_taken=(long double)(end-start)/CLOCKS_PER_SEC; printf("Time elapsed is %Lf\nGRID Size:%Lf*%Lf\nTime Steps Taken:%d\n",time_taken,(xno),floor(yno),n); return 0; }

  Read the article

• Internal loop only runs once, containing loop runs endlessly

  - by Mark

  noob question I'm afraid. I have a loop that runs and rotates the hand of a clock and an internal loop that checks the angle of the hand if it is 90, 180, 270 and 360. On these 4 angles the corresponding div is displayed and its siblings removed. The hand loops and loops eternally, which is what I want, but the angle check only runs the loop once through the whole 360. As the hand passes through the angles it is correctly displaying and removing divs but is doesn't continue after the first revolution of the clock. I've obviously messed up somewhere and there is bound to be a more efficient way of doing all this. I am using jQueryRotate.js for my rotations. Thanks for your time. jQuery(document).ready(function(){ var angle = 0; setInterval(function(){ jQuery("#hand").rotate(angle); function movehand(){ if (angle == 90) { jQuery("#intervention").fadeIn().css("display","block").siblings().css("display","none"); } else if (angle == 180) { jQuery("#management").fadeIn().css("display","block").siblings().css("display","none"); } else if (angle == 270) { jQuery("#prevention").fadeIn().css("display","block").siblings().css("display","none"); } else if (angle == 360) { jQuery("#reaction").fadeIn().css("display","block").siblings().css("display","none"); } else {movehand;} }; movehand(); angle+=1; },10); });

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >