Search Results

Search found 6836 results on 274 pages for 'leap year'.

Page 52/274 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

• Some PowerShell goodness

  - by KyleBurns

  Ever work somewhere where processes dump files into folders to maintain an archive?  Me too and Windows Explorer hates it.  Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job.  These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp.  The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died.  So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it.  The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long.  Here's the code with discussion following: param(     [Parameter(         Mandatory = $false,         Position = 0,         HelpMessage = "Root of the folders or share to archive.  Be sure to end with appropriate path separator"     )]     [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\",       [Parameter(         Mandatory = $false,         Position = 1     )]     [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{     [string]$year=$([string]$_.lastwritetime.year)     [string]$month=$_.lastwritetime.month     [string]$day=$_.lastwritetime.day     $dir=$folderRoot+$year+"\"+$month+"\"+$day     if(!(test-path $dir)){         new-item -type container $dir     }     Write-output $_     move-item $_.fullname $dir } The script starts by declaring two parameters.  The first parameter holds the path to the folder that I am going to be sorting into subdirectories.  The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries.  The second parameter holds a minimum age in days for files to be removed from the root folder.  The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp.  For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist.  Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call.  In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

  Read the article

• Two Weeks To Go, Still Time to Register

  - by speakjava

  Yes, it's now only two weeks to the start of the 17th JavaOne conference! This will be my ninth JavaOne, I came fairly late to this event, attending for the first time in 2002.  Since then I've missed two conferences, 2006 for the birth of my son (a reasonable excuse I think) and 2010 for reasons we'll not go into here.  I have quite the collection of show devices, I've still got the WoWee robot, the HTC phone for JavaFX, the programmable pen and the Sharp Zaurus.  The only one I didn't keep was the homePod music player (I wonder why?) JavaOne is a special conference for many reasons, some of which I list here: A great opportunity to catch up on the latest changes in the Java world.  This is not just in terms of the platform, but as much about what people are doing with Java to build new and cool applications. A chance to meet people.  We have these things called BoFs, which stands for "Birds of a Feather", as in "Birds of a feather, flock together".  The idea being to have sessions where people who are interested in the same topic don't just get to listen to a presentation, but get to talk about it.  These sessions are great, but I find that JavaOne is as much about the people I meet in the corridors and the discussions I have there as it is about the sessions I get to attend. Think outside the box.  There are a lot of sessions at JavaOne covering the full gamut of Java technologies and applications.  Clearly going to sessions that relate to your area of interest is great, but attending some of the more esoteric sessions can often spark thoughts and stimulate the imagination to go off and do new and exciting things once you get back. Get the lowdown from the Java community.  Java is as much about community as anything else and there are plenty of events where you can get involved.  The GlassFish party is always popular and for Java Champions and JUG leaders there's a couple of special events too. Not just all hard work.  Oracle knows how to throw a party and the appreciation event will be a great opportunity to mingle with peers in a more relaxed environment.  This year Pearl Jam and Kings of Leon will be playing live.  Add free beer and what more could you want? So there you have it.  Just a few reasons for why you want to attend JavaOne this year.  Oh, and of course I'll be presenting three sessions which is even more reason to go.  As usual I've gone for some mainstream ("Custom Charts" for JavaFX) and some more 'out there' ("Java and the Raspberry Pi" and "Gestural Interfaces for JavaFX").  Once again I'll be providing plenty of demos so more than half my luggage this year will consist of a Kinect, robot arm, Raspberry Pis, gamepad and even an EEG sensor. If you're a student there's one even more attractive reason for going to JavaOne: It's Free! Registration is here.  Hope to see you there!

  Read the article

• JTF Tranlsation Festival 2011

  - by user13133135

  ?????????????????????? (MT) ??????????????????????? JTF ????????????????????????????????????????????????? ???5??!???21?JTF???????? ? ??:2011?11?29?(?)9:30~20:30(??9:00) ? ??:??????????(????)?(??) ? ??:(?)?????? ??:JTF?????????? ? http://www.jtf.jp/jp/festival/festival_top.html ????????????????????????????????MT ????????????????????????????????????????????????? 90 ???!??(!?)?????????????????????????????????????????????????????????????????????????????? ????????????????? http://www.jtf.jp/jp/festival/festival_program.html#koen_04 ?????????????????????????????? English:  It's been a while since the last post... I have been working on machine translation (MT) and post editing (PE) for Japanese.  Last year was my first step in MT+PE area, and I would take this year as an advanced step.  I plan to talk over Post editing 2011 (Advanced Step) on November 27 at JTF Translation Festival.  ?5 days before application due? 21st JTF Translation Festival ? Date:Nov 29, 2011 Tuesday 9:30~20:30(Gate open: 9:00) ? Place:Arcadia Ichigaya Tokyo ? http://www.jtf.jp/jp/festival/festival_top.html In this session, I would like to expand the thought on "how to best utilize MT and PE" either from the view of Client and Translator.  I will show some examples of post editing as a guideline to know what is the best way and most effective way to do post-edit for Japanese.  Also, I will discuss what is the best practice for MT users (Client). The session lasts 90 minutes... sound a little long for me, but I want to spend more time for discussion than last year.  It would be great to exchange thought or experiences about MT and PE.  What is your concerns or problems in the daily work with MT ?  If you have some, please bring them to my session at JTF Translation Festival.  Here is my session details (Japanese): http://www.jtf.jp/jp/festival/festival_program.html#koen_04 Here is the outline of my session: What is the advantage of MT ? Does it solve all the problems about cost, resource, and quality ?  Well, it is not a magic.  So, you cannot expect all at once.  When you have a problem, there are 3 options... 1. Be patient and wait until everything is ready, 2. Run a workaround using anything available now, 3. Find out something completely new and spend time and money. This time, I will focus Option 2 - do something with what we already have.  That is, I will discuss how we can best utilize MT in our daily business.  My view is two ways: From Client point of view, and From Translator point of view Looking forward to meeting many people and exchanging thoughts and information!

  Read the article

• Styling specific columns and rows

  - by hattenn

  I'm trying to style some specific parts of a 5x4 table that I create. It should be like this: Every even numbered row and every odd numbered row should get a different color. Text in the second, third, and fourth columns should be centered. I have this table: <table> <caption>Some caption</caption> <colgroup> <col> <col class="value"> <col class="value"> <col class="value"> </colgroup> <thead> <tr> <th id="year">Year</th> <th>1999</th> <th>2000</th> <th>2001</th> </tr> </thead> <tbody> <tr class="oddLine"> <td>Berlin</td> <td>3,3</td> <td>1,9</td> <td>2,3</td> </tr> <tr class="evenLine"> <td>Hamburg</td> <td>1,5</td> <td>1,3</td> <td>2,0</td> </tr> <tr class="oddLine"> <td>München</td> <td>0,6</td> <td>1,1</td> <td>1,0</td> </tr> <tr class="evenLine"> <td>Frankfurt</td> <td>1,3</td> <td>1,6</td> <td>1,9</td> </tr> </tbody> <tfoot> <tr class="oddLine"> <td>Total</td> <td>6,7</td> <td>5,9</td> <td>7,2</td> </tr> </tfoot> </table> And I have this CSS file: table, th, td { border: 1px solid black; border-collapse: collapse; padding: 0px 5px; } #year { text-align: left; } .oddLine { background-color: #DDDDDD; } .evenLine { background-color: #BBBBBB; } .value { text-align: center; } And this doesn't work. The text in the columns are not centered. What is the problem here? And is there a way to solve it (other than changing the class of all the cells that I want centered)? P.S.: I think there's some interference with .evenLine and .oddLine classes. Because when I put "background: black" in the class "value", it changes the background color of the columns in the first row. The thing is, if I delete those two classes, text-align still doesn't work, but background attribute works perfectly. Argh...

  Read the article

• Where are my date ranges in Analytics coming from?

  - by Jeffrey McDaniel

  In the P6 Reporting Database there are two main tables to consider when viewing time - W_DAY_D and W_Calendar_FS.  W_DAY_D is populated internally during the ETL process and will provide a row for every day in the given time range. Each row will contain aspects of that day such as calendar year, month, week, quarter, etc. to allow it to be used in the time element when creating requests in Analytics to group data into these time granularities. W_Calendar_FS is used for calculations such as spreads, but is also based on the same set date range. The min and max day_dt (W_DAY_D) and daydate (W_Calendar_FS) will be related to the date range defined, which is a start date and a rolling interval plus a certain range. Generally start date plus 3 years.  In P6 Reporting Database 2.0 this date range was defined in the Configuration utility.  As of P6 Reporting Database 3.0, with the introduction of the Extended Schema this date range is set in the P6 web application. The Extended Schema uses this date range to calculate the data for near real time reporting in P6.  This same date range is validated and used for the P6 Reporting Database.  The rolling date range means if today is April 1, 2010 and the rolling interval is set to three years, the min date will be 1/1/2010 and the max date will be 4/1/2013.  1/1/2010 will be the min date because we always back fill to the beginning of the year. On April 2nd, the Extended schema services are run and the date range is adjusted there to move the max date forward to 4/2/2013.  When the ETL process is run the Reporting Database will pick up this change and also adjust the max date on the W_DAY_D and W_Calendar_FS. There are scenarios where date ranges affecting areas like resource limit may not be adjusted until a change occurs to cause a recalculation, but based on general system usage these dates in these tables will progress forward with the rolling intervals. Choosing a large date range can have an effect on the ETL process for the P6 Reporting Database. The extract portion of the process will pull spread data over into the STAR. The date range defines how long activity and resource assignment spread data is spread out in these tables. If an activity lasts 5 days it will have 5 days of spread data. If a project lasts 5 years, and the date range is 3 years the spread data after that 3 year date range will be bucketed into the last day in the date range. For the overall project and even the activity level you will still see the correct total values.  You just would not be able to see the daily spread 5 years from now. This is an important question when choosing your date range, do you really need to see spread data down to the day 5 years in the future?  Generally this amount of granularity years in the future is not needed. Remember all those values 5, 10, 15, 20 years in the future are still available to report on they would be in more of a summary format on the activity or project.  The data is always there, the level of granularity is the decision.

  Read the article

• Issue 15: Oracle Exadata Marketing Campaigns

  - by rituchhibber

       PARTNER FOCUS Oracle ExadataMarketing Campaign Steve McNickleVP Europe, cVidya Steve McNickle is VP Europe for cVidya, an innovative provider of revenue intelligence solutions for telecom, media and entertainment service providers including AT&T, BT, Deutsche Telecom and Vodafone. The company's product portfolio helps operators and service providers maximise margins, improve customer experience and optimise ecosystem relationships through revenue assurance, fraud and security management, sales performance management, pricing analytics, and inter-carrier services. cVidya has partnered with Oracle for more than a decade. RESOURCES -- Oracle PartnerNetwork (OPN) Oracle Exastack Program Oracle Exastack Optimized Oracle Exastack Labs and Enablement Resources Oracle Engineered Systems Oracle Communications cVidya SUBSCRIBE FEEDBACK PREVIOUS ISSUES Are you ready for Oracle OpenWorld this October? -- -- Please could you tell us a little about cVidya's partnering history with Oracle, and expand on your Oracle Exastack accreditations? "cVidya was established just over ten years ago and we've had a strong relationship with Oracle almost since the very beginning. Through our Revenue Intelligence work with some of the world's largest service providers we collect tremendous amounts of information, amounting to billions of records per day. We help our clients to collect, store and analyse that data to ensure that their end customers are getting the best levels of service, are billed correctly, and are happy that they are on the correct price plan. We have been an Oracle Gold level partner for seven years, and crucially just two months ago we were also accredited as Oracle Exastack Optimized for MoneyMap, our core Revenue Assurance solution. Very soon we also expect to be Oracle Exastack Optimized DRMap, our Data Retention solution." What unique capabilities and customer benefits does Oracle Exastack add to your applications? "Oracle Exastack enables us to deliver radical benefits to our customers. A typical mobile operator in the UK might handle between 500 million and two billion call data record details daily. Each transaction needs to be validated, billed correctly and fraud checked. Because of the enormous volumes involved, our clients demand scalable infrastructure that allows them to efficiently acquire, store and process all that data within controlled cost, space and environmental constraints. We have proved that the Oracle Exadata system can process data up to seven times faster and load it as much as 20 times faster than other standard best-of-breed server approaches. With the Oracle Exadata Database Machine they can reduce their datacentre equipment from say, the six or seven cabinets that they needed in the past, down to just one. This dramatic simplification delivers incredible value to the customer by cutting down enormously on all of their significant cost, space, energy, cooling and maintenance overheads." "The Oracle Exastack Program has given our clients the ability to switch their focus from reactive to proactive. Traditionally they may have spent 80 percent of their day processing, and just 20 percent enabling end customers to see advanced analytics, and avoiding issues before they occur. With our solutions and Oracle Exadata they can now switch that balance around entirely, resulting not only in reduced revenue leakage, but a far higher focus on proactive leakage prevention. How has the Oracle Exastack Program transformed your customer business? "We can already see the impact. Oracle solutions allow our delivery teams to achieve successful deployments, happy customers and self-satisfaction, and the power of Oracle's Exa solutions is easy to measure in terms of their transformational ability. We gained our first sale into a major European telco by demonstrating the major performance gains that would transform their business. Clients can measure the ease of organisational change, the early prevention of business issues, the reduction in manpower required to provide protection and coverage across all their products and services, plus of course end customer satisfaction. If customers know that that service is provided accurately and that their bills are calculated correctly, then over time this satisfaction can be attributed to revenue intelligence and the underlying systems which provide it. Combine this with the further integration we have with the other layers of the Oracle stack, including the telecommunications offerings such as NCC, OCDM and BRM, and the result is even greater customer value—not to mention the increased speed to market and the reduced project risk." What does the Oracle Exastack community bring to cVidya, both in terms of general benefits, and also tangible new opportunities and partnerships? "A great deal. We have participated in the Oracle Exastack community heavily over the past year, and have had lots of meetings with Oracle and our peers around the globe. It brings us into contact with like-minded, innovative partners, who like us are not happy to just stand still and want to take fresh technology to their customer base in order to gain enhanced value. We identified three new partnerships in each of two recent meetings, and hope these will open up new opportunities, not only in areas that exactly match where we operate today, but also in some new associative areas that will expand our reach into new business sectors. Notably, thanks to the Exastack community we were invited on stage at last year's Oracle OpenWorld conference. Appearing so publically with Oracle senior VP Judson Althoff elevated awareness and visibility of cVidya and has enabled us to participate in a number of other events with Oracle over the past eight months. We've been involved in speaking opportunities, forums and exhibitions, providing us with invaluable opportunities that we wouldn't otherwise have got close to." How has Exastack differentiated cVidya as an ISV, and helped you to evolve your business to the next level? "When we are selling to our core customer base of Tier 1 telecommunications providers, we know that they want more than just software. They want an enduring partnership that will last many years, they want innovation, and a forward thinking partner who knows how to guide them on where they need to be to meet market demand three, five or seven years down the line. Membership of respected global bodies, such as the Telemanagement Forum enables us to lead standard adherence in our area of business, giving us a lot of credibility, but Oracle is also involved in this forum with its own telecommunications portfolio, strengthening our position still further. When we approach CEOs, CTOs and CIOs at the very largest Tier 1 operators, not only can we easily show them that our technology is fantastic, we can also talk about our strong partnership with Oracle, and our joint embracing of today's standards and tomorrow's innovation." Where would you like cVidya to be in one year's time? "We want to get all of our relevant products Oracle Exastack Optimized. Our MoneyMap Revenue Assurance solution is already Exastack Optimised, our DRMAP Data Retention Solution should be Exastack Optimised within the next month, and our FraudView Fraud Management solution within the next two to three months. We'd then like to extend our Oracle accreditation out to include other members of the Oracle Engineered Systems family. We are moving into the 'Big Data' space, and so we're obviously very keen to work closely with Oracle to conduct pilots, map new technologies onto Oracle Big Data platforms, and embrace and measure the benefits of other Oracle systems, namely Oracle Exalogic Elastic Cloud, the Oracle Exalytics In-Memory Machine and the Oracle SPARC SuperCluster. We would also like to examine how the Oracle Database Appliance might benefit our Tier 2 service provider customers. Finally, we'd also like to continue working with the Oracle Communications Global Business Unit (CGBU), furthering our integration with Oracle billing products so that we are able to quickly deploy fraud solutions into Oracle's Engineered System stack, give operational benefits to our clients that are pre-integrated, more cost-effective, and can be rapidly deployed rapidly and producing benefits in three months, not nine months." Chris Baker ,Senior Vice President, Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners' business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? "Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best – building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best in class application platform so the ISV is free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success." How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? "We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme." How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? "One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry." What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? "My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data – a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle." What opportunities are immediately opened to new ISV partners joining the OPN? "As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation." Finally, are there any other messages that you would like to share with the Oracle ISV community? "The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: “I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud”. The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them." -- Gergely Strbik is Oracle Hardware and Software Product Manager for Avnet in Hungary. Avnet Technology Solutions is an OracleValue Added Distributor focused on the development of the existing Oracle channel. This includes the recruitment and enablement of Oracle partners as well as driving deeper adoption of Oracle's technology and application products within the IT channel. "The main business benefits of ODA for our customers and partners are scalability, flexibility, a great price point for the high performance delivered, and the easily configurable embedded Linux operating system. People welcome a lower point of entry and the ability to grow capacity on demand as their business expands." "Marketing and selling the ODA requires another way of thinking because it is an appliance. We have to transform the ways in which our partners and customers think from buying hardware and software independently to buying complete solutions. Successful early adopters and satisfied customer reactions will certainly help us to sell the ODA. We will have more experience with the product after the first deliveries and installations—end users need to see the power and benefits for themselves." "Our typical ODA customers will be those looking for complete solutions from a single reseller partner who is also able to manage the appliance. They will have enjoyed using Oracle Database but now want a new product that is able to unlock new levels of performance. A higher proportion of potential customers will come from our existing Oracle base, with around 30% from new business, but we intend to evangelise the ODA on the market to see how we can change this balance as all our customers adjust to the concept of 'Hardware and Software, Engineered to Work Together'. -- Back to the welcome page

  Read the article

• jQuery $.ajax Not Working in IE8 but it works on FireFox & Chrome

  - by Sam3k

  I have the following ajax call which works perfectly in Firefox and Chrome but not IE: function getAJAXdates( startDate, numberOfNights, opts ) { var month = startDate.getMonth() + 1; var day = startDate.getDate(); var year = startDate.getFullYear(); var d = new Date(); var randNum = Math.floor(Math.random()*100000000); $.ajax({ type : "GET", dataType : "json", url : "/availability/ajax/bookings?rand="+randNum, cache : false, data : 'month='+month+'&day='+day+'&year='+year+'&nights='+numberOfNights, contentType : 'application/json; charset=utf8', success : function(data) { console.log('@data: '+data); insertCellData(data, opts, startDate); }, error:function(xhr, status, errorThrown) { console.log('@Error: '+errorThrown); console.log('@Status: '+status); console.log('@Status Text: '+xhr.statusText); } }); } I know for a fact that all the variables are passing the right content and $.ajax is indeed passing all the paramater/values. This is what I get on error: LOG: @Error: undefined LOG: @Status: parsererror LOG: @Status Text: OK I'm aware of the cache issue on IE and implemented a random paramater to clear it up. Finally these are the headers that are sent back from the backend: header('Content-Type: application/json; charset=utf8'); header("Cache-Control: no-cache"); header("Expires: 0"); header('Access-Control-Max-Age: 3628800'); header('Access-Control-Allow-Methods: GET, POST, PUT, DELETE');

  Read the article

• linebreak in url with Bibtex and hyperref package

  - by Tim

  Why is this item not shown properly in my bibliography? @misc{ann, abstract = {ANN is an implbmentation of nearest neighbor search.}, author = {David M. Mount and Sunil Arya}, howpublished = {\url{http://www.cs.umd.edu/~mount/ANN/}}, keywords = {knn}, posted-at = {2010-04-08 00:05:04}, priority = {2}, title = {ANN.}, url = "http://www.cs.umd.edu/~mount/ANN/", year = {2008} } @misc{Nilsson96introductionto, author = {Nilsson, Nils J.}, citeulike-article-id = {6995464}, howpublished = {\url{http://robotics.stanford.edu/people/nilsson/mlbook.html}}, keywords = {*file-import-10-04-11}, posted-at = {2010-04-11 06:52:28}, priority = {2}, title = {Introduction to Machine Learning: An Early Draft of a Proposed Textbook.}, year = {1996} } EDIT: I am using \usepackage{hyperref}, not \usepackage{url}. I don't know what changes I just made made the first item appear properly now @misc{ann, abstract = {ANN is an implbmentation of nearest neighbor search.}, author = {David M. Mount and Sunil Arya}, howpublished = {\url{http://www.cs.umd.edu/~mount/ANN/}}, keywords = {ann}, posted-at = {2010-04-08 00:05:04}, priority = {2}, title = {The \textsc{A}pproximate \textsc{N}earest \textsc{N}eighbor \textsc{S}earching \textsc{L}ibrary.}, url = "http://www.cs.umd.edu/~mount/ANN/", year = {2008} } EDIT: Since I am using hyperref package, it produces error when using url package together with it. So the two cannot work together? I would like to use hyper links inside pdf file, so I would like to use hyperref package instead of url package. I googled a bit, and try \usepackage[hyperindex,breaklinks]{hyperref}, but there is still no line break just as before. How can I do it? Is there conflict in the packages that I am now using?: \usepackage{amsmath} \usepackage{amsfonts} \usepackage[dvips]{graphicx} \usepackage{wrapfig} \graphicspath{{./figs/}} \DeclareGraphicsExtensions{.eps} \usepackage{fixltx2e} \usepackage{array} \usepackage{times} \usepackage{fancyhdr} \usepackage{multirow} \usepackage{algorithmic} \usepackage{algorithm} \usepackage{slashbox} \usepackage{multirow} \usepackage{rotating} \usepackage{longtable} \usepackage[hyperindex,breaklinks]{hyperref} \usepackage{forloop} \usepackage{lscape} \usepackage{supertabular} \usepackage{amssymb} \usepackage{amsthm}

  Read the article

• Prevent full table scan for query with multiple where clauses

  - by Dave Jarvis

  A while ago I posted a message about optimizing a query in MySQL. I have since ported the data and query to PostgreSQL, but now PostgreSQL has the same problem. The solution in MySQL was to force the optimizer to not optimize using STRAIGHT_JOIN. PostgreSQL offers no such option. Here is the explain: Here is the query: SELECT avg(d.amount) AS amount, y.year FROM station s, station_district sd, year_ref y, month_ref m, daily d LEFT JOIN city c ON c.id = 10663 WHERE -- Find all the stations within a specific unit radius ... -- 6371.009 * SQRT( POW(RADIANS(c.latitude_decimal - s.latitude_decimal), 2) + (COS(RADIANS(c.latitude_decimal + s.latitude_decimal) / 2) * POW(RADIANS(c.longitude_decimal - s.longitude_decimal), 2)) ) <= 50 AND -- Ignore stations outside the given elevations -- s.elevation BETWEEN 0 AND 2000 AND sd.id = s.station_district_id AND -- Gather all known years for that station ... -- y.station_district_id = sd.id AND -- The data before 1900 is shaky; insufficient after 2009. -- y.year BETWEEN 1980 AND 2000 AND -- Filtered by all known months ... -- m.year_ref_id = y.id AND m.month = 12 AND -- Whittled down by category ... -- m.category_id = '001' AND -- Into the valid daily climate data. -- m.id = d.month_ref_id AND d.daily_flag_id <> 'M' GROUP BY y.year It appears as though PostgreSQL is looking at the DAILY table first, which is simply not the right way to go about this query as there are nearly 300 million rows. How do I force PostgreSQL to start at the CITY table? Thank you!

  Read the article

• Best fit curve for trend line

  - by Dave Jarvis

  Problem Constraints Size of the data set, but not the data itself, is known. Data set grows by one data point at a time. Trend line is graphed one data point at a time (using a spline/Bezier curve). Graphs The collage below shows data sets with reasonably accurate trend lines: The graphs are: Upper-left. By hour, with ~24 data points. Upper-right. By day for one year, with ~365 data points. Lower-left. By week for one year, with ~52 data points. Lower-right. By month for one year, with ~12 data points. User Inputs The user can select: the type of time series (hourly, daily, monthly, quarterly, annual); and the start and end dates for the time series. For example, the user could select a daily report for 30 days in June. Trend Weight To calculate the window size (i.e., the number of data points to average when calculating the trend line), the following expression is used: data points / trend weight Where data points is derived from user inputs and trend weight is 6.4. Even though a trend weight of 6.4 produces good fits, it is rather arbitrary, and might not be appropriate for different user inputs. Question How should trend weight be calculated given the constraints of this problem?

  Read the article

• Winform/Program and how to write class 1, class 2, class 3, class 4 in array to linklabels?!!?

  - by JB

  So my program works like this: using winforms, user enters ID number, using an array, based on the right id number, that student information and class schedule outputs in a message box! My question is how to take the 4 classes in the message box/array and write them to the linklabel text in form 2???? My Getschedule class contains the array and is listed below: namespace Eagle_Eye_Class_Finder { public class GetSchedule { IDnumber[] IDnumbers = new IDnumber[3]; public string GetDataFromNumber(string ID) { foreach (IDnumber IDCandidateMatch in IDnumbers) { if (IDCandidateMatch.ID == ID) { StringBuilder myData = new StringBuilder(); myData.AppendLine(IDCandidateMatch.Name); myData.AppendLine(": "); myData.AppendLine(IDCandidateMatch.ID); myData.AppendLine(IDCandidateMatch.year); myData.AppendLine(IDCandidateMatch.class1); myData.AppendLine(IDCandidateMatch.class2); myData.AppendLine(IDCandidateMatch.class3); myData.AppendLine(IDCandidateMatch.class4); //return myData; return myData.ToString(); } } return ""; } public GetSchedule() { IDnumbers[0] = new IDnumber() { Name = "Joshua Banks", ID = "900456317", year = "Senior", class1 = "TEET 4090", class2 = "TEET 3020", class3 = "TEET 3090", class4 = "TEET 4290" }; IDnumbers[1] = new IDnumber() { Name = "Sean Ward", ID = "900456318", year = "Junior", class1 = "ENGNR 4090", class2 = "ENGNR 3020", class3 = "ENGNR 3090", class4 = "ENGNR 4290" }; IDnumbers[2] = new IDnumber() { Name = "Terrell Johnson", ID = "900456319", year = "Sophomore", class1 = "BUS 4090", class2 = "BUS 3020", class3 = "BUS 3090", class4 = "BUS 4290" }; } public class IDnumber { public string Name { get; set; } public string ID { get; set; } public string year { get; set; } public string class1 { get; set; } public string class2 { get; set; } public string class3 { get; set; } public string class4 { get; set; } public static void ProcessNumber(IDnumber myNum) { StringBuilder myData = new StringBuilder(); myData.AppendLine(myNum.Name); myData.AppendLine(": "); myData.AppendLine(myNum.ID); myData.AppendLine(myNum.year); myData.AppendLine(myNum.class1); myData.AppendLine(myNum.class2); myData.AppendLine(myNum.class3); myData.AppendLine(myNum.class4); MessageBox.Show(myData.ToString()); } } } } My form 2 which will contain the linklabels is listed below: public class YOURCLASSSCHEDULE : System.Windows.Forms.Form { public System.Windows.Forms.LinkLabel linkLabel1; public System.Windows.Forms.LinkLabel linkLabel2; public System.Windows.Forms.LinkLabel linkLabel3; public System.Windows.Forms.LinkLabel linkLabel4; private Button button1; /// Required designer variable. public System.ComponentModel.Container components = null; public YOURCLASSSCHEDULE() { // InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(YOURCLASSSCHEDULE)); this.linkLabel1 = new System.Windows.Forms.LinkLabel(); this.linkLabel2 = new System.Windows.Forms.LinkLabel(); this.linkLabel3 = new System.Windows.Forms.LinkLabel(); this.linkLabel4 = new System.Windows.Forms.LinkLabel(); this.button1 = new System.Windows.Forms.Button(); this.SuspendLayout(); // // linkLabel1 // this.linkLabel1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel1.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel1.LinkArea = new System.Windows.Forms.LinkArea(0, 7); this.linkLabel1.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel1.Location = new System.Drawing.Point(41, 123); this.linkLabel1.Name = "linkLabel1"; this.linkLabel1.Size = new System.Drawing.Size(288, 32); this.linkLabel1.TabIndex = 1; this.linkLabel1.TabStop = true; this.linkLabel1.Text = "Class 1"; this.linkLabel1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel1.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked); // // linkLabel2 // this.linkLabel2.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel2.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel2.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel2.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel2.Location = new System.Drawing.Point(467, 123); this.linkLabel2.Name = "linkLabel2"; this.linkLabel2.Size = new System.Drawing.Size(288, 32); this.linkLabel2.TabIndex = 2; this.linkLabel2.TabStop = true; this.linkLabel2.Text = "Class 2"; this.linkLabel2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel2.VisitedLinkColor = System.Drawing.Color.Navy; this.linkLabel2.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel2_LinkClicked); // // linkLabel3 // this.linkLabel3.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel3.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel3.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel3.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel3.Location = new System.Drawing.Point(41, 311); this.linkLabel3.Name = "linkLabel3"; this.linkLabel3.Size = new System.Drawing.Size(288, 32); this.linkLabel3.TabIndex = 3; this.linkLabel3.TabStop = true; this.linkLabel3.Text = "Class 3"; this.linkLabel3.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel3.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel3_LinkClicked); // // linkLabel4 // this.linkLabel4.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel4.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel4.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel4.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel4.Location = new System.Drawing.Point(467, 311); this.linkLabel4.Name = "linkLabel4"; this.linkLabel4.Size = new System.Drawing.Size(288, 32); this.linkLabel4.TabIndex = 4; this.linkLabel4.TabStop = true; this.linkLabel4.Text = "Class 4"; this.linkLabel4.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel4.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel4_LinkClicked); // // this.AutoScaleBaseSize = new System.Drawing.Size(6, 15); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(790, 482); this.Controls.Add(this.button1); this.Controls.Add(this.linkLabel4); this.Controls.Add(this.linkLabel3); this.Controls.Add(this.linkLabel2); this.Controls.Add(this.linkLabel1); this.Font = new System.Drawing.Font("OldDreadfulNo7 BT", 8.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.Name = "YOURCLASSSCHEDULE"; this.Text = "Your Classes"; this.Load += new System.EventHandler(this.Form2_Load); this.ResumeLayout(false); } #endregion public void Form2_Load(object sender, System.EventArgs e) { // if (text == "900456317") // { //} } public void linkLabel1_LinkClicked(object sender, System.Windows.Forms.LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void button1_Click(object sender, EventArgs e) { Form1 form1 = new Form1(); form1.Show(); this.Hide(); } } }

  Read the article

• Winform/Program and how to write array information to linklabels?!!?

  - by JB

  So my program works like this: using winforms, user enters ID number, using an array, based on the right id number, that student information and class schedule outputs in a message box! My question is how to take the 4 classes in the message box/array and write them to the linklabel text in form 2???? My Getschedule class contains the array and is listed below: namespace Eagle_Eye_Class_Finder { public class GetSchedule { IDnumber[] IDnumbers = new IDnumber[3]; public string GetDataFromNumber(string ID) { foreach (IDnumber IDCandidateMatch in IDnumbers) { if (IDCandidateMatch.ID == ID) { StringBuilder myData = new StringBuilder(); myData.AppendLine(IDCandidateMatch.Name); myData.AppendLine(": "); myData.AppendLine(IDCandidateMatch.ID); myData.AppendLine(IDCandidateMatch.year); myData.AppendLine(IDCandidateMatch.class1); myData.AppendLine(IDCandidateMatch.class2); myData.AppendLine(IDCandidateMatch.class3); myData.AppendLine(IDCandidateMatch.class4); //return myData; return myData.ToString(); } } return ""; } public GetSchedule() { IDnumbers[0] = new IDnumber() { Name = "Joshua Banks", ID = "900456317", year = "Senior", class1 = "TEET 4090", class2 = "TEET 3020", class3 = "TEET 3090", class4 = "TEET 4290" }; IDnumbers[1] = new IDnumber() { Name = "Sean Ward", ID = "900456318", year = "Junior", class1 = "ENGNR 4090", class2 = "ENGNR 3020", class3 = "ENGNR 3090", class4 = "ENGNR 4290" }; IDnumbers[2] = new IDnumber() { Name = "Terrell Johnson", ID = "900456319", year = "Sophomore", class1 = "BUS 4090", class2 = "BUS 3020", class3 = "BUS 3090", class4 = "BUS 4290" }; } public class IDnumber { public string Name { get; set; } public string ID { get; set; } public string year { get; set; } public string class1 { get; set; } public string class2 { get; set; } public string class3 { get; set; } public string class4 { get; set; } public static void ProcessNumber(IDnumber myNum) { StringBuilder myData = new StringBuilder(); myData.AppendLine(myNum.Name); myData.AppendLine(": "); myData.AppendLine(myNum.ID); myData.AppendLine(myNum.year); myData.AppendLine(myNum.class1); myData.AppendLine(myNum.class2); myData.AppendLine(myNum.class3); myData.AppendLine(myNum.class4); MessageBox.Show(myData.ToString()); } } } } My form 2 which will contain the linklabels is listed below: public class YOURCLASSSCHEDULE : System.Windows.Forms.Form { public System.Windows.Forms.LinkLabel linkLabel1; public System.Windows.Forms.LinkLabel linkLabel2; public System.Windows.Forms.LinkLabel linkLabel3; public System.Windows.Forms.LinkLabel linkLabel4; private Button button1; /// Required designer variable. public System.ComponentModel.Container components = null; public YOURCLASSSCHEDULE() { // InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(YOURCLASSSCHEDULE)); this.linkLabel1 = new System.Windows.Forms.LinkLabel(); this.linkLabel2 = new System.Windows.Forms.LinkLabel(); this.linkLabel3 = new System.Windows.Forms.LinkLabel(); this.linkLabel4 = new System.Windows.Forms.LinkLabel(); this.button1 = new System.Windows.Forms.Button(); this.SuspendLayout(); // // linkLabel1 // this.linkLabel1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel1.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel1.LinkArea = new System.Windows.Forms.LinkArea(0, 7); this.linkLabel1.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel1.Location = new System.Drawing.Point(41, 123); this.linkLabel1.Name = "linkLabel1"; this.linkLabel1.Size = new System.Drawing.Size(288, 32); this.linkLabel1.TabIndex = 1; this.linkLabel1.TabStop = true; this.linkLabel1.Text = "Class 1"; this.linkLabel1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel1.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked); // // linkLabel2 // this.linkLabel2.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel2.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel2.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel2.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel2.Location = new System.Drawing.Point(467, 123); this.linkLabel2.Name = "linkLabel2"; this.linkLabel2.Size = new System.Drawing.Size(288, 32); this.linkLabel2.TabIndex = 2; this.linkLabel2.TabStop = true; this.linkLabel2.Text = "Class 2"; this.linkLabel2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel2.VisitedLinkColor = System.Drawing.Color.Navy; this.linkLabel2.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel2_LinkClicked); // // linkLabel3 // this.linkLabel3.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel3.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel3.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel3.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel3.Location = new System.Drawing.Point(41, 311); this.linkLabel3.Name = "linkLabel3"; this.linkLabel3.Size = new System.Drawing.Size(288, 32); this.linkLabel3.TabIndex = 3; this.linkLabel3.TabStop = true; this.linkLabel3.Text = "Class 3"; this.linkLabel3.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel3.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel3_LinkClicked); // // linkLabel4 // this.linkLabel4.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel4.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel4.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel4.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel4.Location = new System.Drawing.Point(467, 311); this.linkLabel4.Name = "linkLabel4"; this.linkLabel4.Size = new System.Drawing.Size(288, 32); this.linkLabel4.TabIndex = 4; this.linkLabel4.TabStop = true; this.linkLabel4.Text = "Class 4"; this.linkLabel4.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel4.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel4_LinkClicked); // // this.AutoScaleBaseSize = new System.Drawing.Size(6, 15); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(790, 482); this.Controls.Add(this.button1); this.Controls.Add(this.linkLabel4); this.Controls.Add(this.linkLabel3); this.Controls.Add(this.linkLabel2); this.Controls.Add(this.linkLabel1); this.Font = new System.Drawing.Font("OldDreadfulNo7 BT", 8.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.Name = "YOURCLASSSCHEDULE"; this.Text = "Your Classes"; this.Load += new System.EventHandler(this.Form2_Load); this.ResumeLayout(false); } #endregion public void Form2_Load(object sender, System.EventArgs e) { // if (text == "900456317") // { //} } public void linkLabel1_LinkClicked(object sender, System.Windows.Forms.LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void button1_Click(object sender, EventArgs e) { Form1 form1 = new Form1(); form1.Show(); this.Hide(); } } }

  Read the article

• ASP.NET MVC solution to a forms application?

  - by Gloria Huang

  Hello, We're building a survey system and utilising ASP.NET MVC and wondered if anyone can offer suggestions on the architecture. Here's the problem we're trying to solve. Essentially an agency sends out several surveys every year. They're very structured and not like SurveyMonkey style of surveys - they're actually applications of feedback. Much like a Visa Application there are lots of things they need to do and sometimes it takes them 2-3 weeks to fill it out. They can upload files (proofs of purchase etc - PDF/JPG) and also multiple "items". Eg. Say for instance they've worked for McDonalds, there could be 20 different franchises, they build a list of locations they've worked. 3 weeks later there could be another 3 new locations and 2 may have closed down. So we need to ensure the forms are able to handle those situations. The forms themselves (markup and data) change every year - I should mention that this for a taxation/finance/budget system. We were thinking of using MVC, using Xml to store the data (temporarily), XSD to validate the data, XSL to transform the data to presentable markup (for them to fill out) and then once they "Submit" an application it gets stored into the DB in relevant areas. When the user starts the application process, they can save the progress so far (we validate whatever they entred and ignore any they havent), save it as an Xml blob and store in the DB. When they're finally ready to submit it, then we do a full validation and upload the files and store them securely (it has their business proofs and accounting statements) and then run some workflows. What I'm really concerned about is how to manage changing forms versions (a year later). How are form/application systems written these days? We have 2 months to pull this off and about 30 forms to deliver. So 30xXML, 30xXSD, 30xXSL.

  Read the article

• Cannot find symbol - variable

  - by Ben Garside

  I'm new to Java, and I'm trying to get user input, store each line of input as a variable and then return each value so that it can be passed on somewhere else. When I try and compile it is telling me that it can't find the variable magnitude. I'm assuming it won't find the others either. I'm guessing that this is because I've declare the variables inside of the "try" but don't know how to get it so that the return statement accepts them. Code is as follows: public Earthquake userAddEarthquake() { Scanner scanner = new Scanner(System.in); try{ // convert the string read from the scanner into Integer type System.out.println("Please Enter An Earthquake Magnitude: "); Double magnitude = Double.parseDouble(scanner.nextLine()); System.out.println("Please Enter The Earthquakes Latitude Position: "); scanner = new Scanner(System.in); Double positionLatitude = Double.parseDouble(scanner.nextLine()); System.out.print("Please Enter The Earthquakes Longitude Position: "); scanner = new Scanner(System.in); Double positionLongitude = Double.parseDouble(scanner.nextLine()); System.out.print("Please Enter The Year That The Earthquake Occured: "); scanner = new Scanner(System.in); int year = Integer.parseInt(scanner.nextLine()); System.out.println("Magnitude = " + magnitude); } catch(NumberFormatException ne){ System.out.println("Invalid Input"); } finally{ scanner.close(); } return new Earthquake(magnitude, positionLatitude, positionLongitude, year); }

  Read the article

• displaying database content in wxHaskell

  - by snorlaks

  Hello, Im using tutorials from wxHaskell and want to display content of table movies in the grid. HEre is my code : {-------------------------------------------------------------------------------- Test Grid. --------------------------------------------------------------------------------} module Main where import Graphics.UI.WX import Graphics.UI.WXCore hiding (Event) import Database.HDBC.Sqlite3 (connectSqlite3) import Database.HDBC main = start gui gui :: IO () gui = do f <- frame [text := "Grid test", visible := False] -- grids g <- gridCtrl f [] gridSetGridLineColour g (colorSystem Color3DFace) gridSetCellHighlightColour g black appendColumns g (movies) -- Here is error: -- Couldn't match expected type [String]' -- against inferred typeIO [[String]]' --appendRows g (map show [1..length (tail movies)]) --mapM_ (setRow g) (zip [0..] (tail movies)) gridAutoSize g -- layout set f [layout := column 5 [fill (dynamic (widget g))] ] focusOn g set f [visible := True] -- reduce flicker at startup. return () where movies = do conn <- connectSqlite3 "Spop.db" r <- quickQuery' conn "SELECT id, title, year, description from Movie where id = 1" [] let myResult = map convRow r return myResult setRow g (row,values) = mapM_ ((col,value) - gridSetCellValue g row col value) (zip [0..] values) {-------------------------------------------------------------------------------- Library?f --------------------------------------------------------------------------------} gridCtrl :: Window a - [Prop (Grid ())] - IO (Grid ()) gridCtrl parent props = feed2 props 0 $ initialWindow $ \id rect - \props flags - do g <- gridCreate parent id rect flags gridCreateGrid g 0 0 0 set g props return g appendColumns :: Grid a - [String] - IO () appendColumns g [] = return () appendColumns g labels = do n <- gridGetNumberCols g gridAppendCols g (length labels) True mapM_ ((i,label) - gridSetColLabelValue g i label) (zip [n..] labels) appendRows :: Grid a - [String] - IO () appendRows g [] = return () appendRows g labels = do n <- gridGetNumberRows g gridAppendRows g (length labels) True mapM_ ((i,label) - gridSetRowLabelValue g i label) (zip [n..] labels) convRow :: [SqlValue] - [String] convRow [sqlId, sqlTitle, sqlYear, sqlDescription] = [intid, title, year, description] where intid = (fromSql sqlId)::String title = (fromSql sqlTitle)::String year = (fromSql sqlYear)::String description = (fromSql sqlDescription)::String What should I do to get rif of error in code above (24th line)

  Read the article

• Create a unique ID by fuzzy matching of names (via agrep using R)

  - by tbrambor

  Using R, I am trying match on people's names in a dataset structured by year and city. Due to some spelling mistakes, exact matching is not possible, so I am trying to use agrep() to fuzzy match names. A sample chunk of the dataset is structured as follows: df <- data.frame(matrix( c("1200013","1200013","1200013","1200013","1200013","1200013","1200013","1200013", "1996","1996","1996","1996","2000","2000","2004","2004","AGUSTINHO FORTUNATO FILHO","ANTONIO PEREIRA NETO","FERNANDO JOSE DA COSTA","PAULO CEZAR FERREIRA DE ARAUJO","PAULO CESAR FERREIRA DE ARAUJO","SEBASTIAO BOCALOM RODRIGUES","JOAO DE ALMEIDA","PAULO CESAR FERREIRA DE ARAUJO"), ncol=3,dimnames=list(seq(1:8),c("citycode","year","candidate")) )) The neat version: citycode year candidate 1 1200013 1996 AGUSTINHO FORTUNATO FILHO 2 1200013 1996 ANTONIO PEREIRA NETO 3 1200013 1996 FERNANDO JOSE DA COSTA 4 1200013 1996 PAULO CEZAR FERREIRA DE ARAUJO 5 1200013 2000 PAULO CESAR FERREIRA DE ARAUJO 6 1200013 2000 SEBASTIAO BOCALOM RODRIGUES 7 1200013 2004 JOAO DE ALMEIDA 8 1200013 2004 PAULO CESAR FERREIRA DE ARAUJO I'd like to check in each city separately, whether there are candidates appearing in several years. E.g. in the example, PAULO CEZAR FERREIRA DE ARAUJO PAULO CESAR FERREIRA DE ARAUJO appears twice (with a spelling mistake). Each candidate across the entire data set should be assigned a unique numeric candidate ID. The dataset is fairly large (5500 cities, approx. 100K entries) so a somewhat efficient coding would be helpful. Any suggestions as to how to implement this?

  Read the article

• sfJQueryUIPlugin: No Picker for new records

  - by Prasad

  Everyday is a new day with Symfony, but I'm loving it! This morning I installed the sfJQueryUIPlugin. It has very little dependencies & accepts themeRoller styles. However, it has 2 issues: [Feature_Request] There is no way to specify the year range. By default, it shows a 20 year range around the year in the field value. eg. if field value is 1993-01-20, the range will be 1983 to 2003. ??? Has anyone found a way out??? The DatePicker does not appear when the field is empty, Thus it does not show up during new record creation. To solve this, I tried setting up the default value in the date input field (which now appears as a text input) using $this->setDefault('date_of_birth',date('Y-m-d')); ??? Is anybody facing this problem of picker now available during new record creation ??? ??? Also is it the right way to set default value ??? Thanks in advance.

  Read the article

• Good Learning Method for Objective-C?

  - by Josh Kahane

  Hi I know this must be asked a millions times and can't be easy to answer as there is o definitive method, but any help would be appreciated, thanks. I have been playing around with all sorts of things in Xcode and with Objective-C, however I can't seem to find a good way of learning things in an efficient way. I have bought the book 'Programming in Objective-C 2.0' and its great but just lays down the basics it seems. I want to learn in the 2D game development direction, then of course 3D after nailing that, if thats the right thing to do? I am 17 currently in year 13, last year of school/A Levels and am almost definitely taking a gap year. Any good, well known reputable courses online or offline (real world)? This is my first programming language, and I am absolutely serious about learning this. One last question, is when learning things online, I have in the past started building a feature and learning a certain aspect in programming only to find out after adding more its slows down the app or its to inefficient. Is the key to use a certain method in a certain situation (being os many ways to do the same thing) or use any of those methods and refine it in your app to make it run smoothly? Sorry, its hard for me to know when I have little experience, thus far. Sorry for rambling on! I would appreciate any help, thank you!

  Read the article

• Aggregating, restructuring hourly time series data in R

  - by Advait Godbole

  I have a year's worth of hourly data in a data frame in R: > str(df.MHwind_load) # compactly displays structure of data frame 'data.frame': 8760 obs. of 6 variables: $ Date : Factor w/ 365 levels "2010-04-01","2010-04-02",..: 1 1 1 1 1 1 1 1 1 1 ... $ Time..HRs. : int 1 2 3 4 5 6 7 8 9 10 ... $ Hour.of.Year : int 1 2 3 4 5 6 7 8 9 10 ... $ Wind.MW : int 375 492 483 476 486 512 421 396 456 453 ... $ MSEDCL.Demand: int 13293 13140 12806 12891 13113 13802 14186 14104 14117 14462 ... $ Net.Load : int 12918 12648 12323 12415 12627 13290 13765 13708 13661 14009 ... While preserving the hourly structure, I would like to know how to extract a particular month/group of months the first day/first week etc of each month all mondays, all tuesdays etc of the year I have tried using "cut" without result and after looking online think that "lubridate" might be able to do so but haven't found suitable examples. I'd greatly appreciate help on this issue.

  Read the article

• Regex issue with comma's telling me there are 6 args, instead of intended 4

  - by Azher

  I have a scenario outline table that looks like the following: Scenario Outline: Verify Full ad details Given I am on the xxx classified home page And I have entered <headline> in the search field & clicked on search When I click on full details Then I should see <headline> <year> <mileage> <price> displaying correctly and successfully Examples: |headline |year |mileage |price | |alfa romeo 166 |2005 |73,000 |6,990 | When I run my scenario it spits out that I have 6 args. But what I thought, I should only have 4 args: headline, year, mileage and price. I am thinking that it is taking the comma's and what is before and after it as two seperate args. Is there any way that I can make cucumber think that there are only 4 args with the example below? I have looked at messing around with regex but I dont seem to be getting anywhere. Any help would be greatly appreciated.

  Read the article

• Combining data sets without losing observations in SAS

  - by John

  Hye guys, I know, another post another problem :D :(. I took a screenshot to easily explain my problem. http://i39.tinypic.com/rhms0h.jpg As you can see I want to merge two tables (again), the Base & Analyst table. What I want to achieve is displayed in the right bottom corner table. I’m calculating the number of total analysts and female analysts for each month in the analyst table. In the base table I have different observations for one company (here company Alcoa with ticker AA). When I use the following command: data want; merge base analyst; by month ; run; I get the right up corner problem. My observations in the main table are being narrowed down to only 4 observations (for each different year one observation, 2001, 2002, 2005, 2006). What I want is that the observations are not reduced but that for every year the same data is being placed as shown in the right bottom corner. What am I missing in my merge command? In both tables I have month as a time count variable ( the observations in my base table are monthly) on which I need to merge. For clarity I added 2 screenshots of my real databases in SAS. The base table: http://i42.tinypic.com/dr5jky.jpg The analyst table: http://i40.tinypic.com/eqpmqq.jpg Here is what my merged table looks like: http://i43.tinypic.com/116i62s.jpg You can clearly see that the merged table only has four observations left for AA (one for each unique year) instead of the original 8. Anyone an idea to solve this?

  Read the article

• Replace textfields with dropdown select fields

  - by 47

  I have three model classes that look as below: class Model(models.Model): model = models.CharField(max_length=20, blank=False) manufacturer = models.ForeignKey(Manufacturer) date_added = models.DateField(default=datetime.today) def __unicode__(self): name = ''+str(self.manufacturer)+" "+str(self.model) return name class Series(models.Model): series = models.CharField(max_length=20, blank=True, null=True) model = models.ForeignKey(Model) date_added = models.DateField(default=datetime.today) def __unicode__(self): name = str(self.model)+" "+str(self.series) return name class Manufacturer(models.Model): MANUFACTURER_POPULARITY_CHOICES = ( ('1', 'Primary'), ('2', 'Secondary'), ('3', 'Tertiary'), ) manufacturer = models.CharField(max_length=15, blank=False) date_added = models.DateField(default=datetime.today) manufacturer_popularity = models.CharField(max_length=1, choices=MANUFACTURER_POPULARITY_CHOICES) def __unicode__(self): return self.manufacturer I want to have the fields for model series and manufacturer represented as dropdowns instead of text fields. I have customized the model forms as below: class SeriesForm(ModelForm): series = forms.ModelChoiceField(queryset=Series.objects.all()) class Meta: model = Series exclude = ('model', 'date_added',) class ModelForm(ModelForm): model = forms.ModelChoiceField(queryset=Model.objects.all()) class Meta: model = Model exclude = ('manufacturer', 'date_added',) class ManufacturerForm(ModelForm): manufacturer = forms.ModelChoiceField(queryset=Manufacturer.objects.all()) class Meta: model = Manufacturer exclude = ('date_added',) However, the dropdowns are populated with the unicode in the respective class...how can I further customize this to get the end result I want? Also, how can I populate the forms with the correct data for editing? Currently only SeriesForm is populated. The starting point of all this is from another class whose declaration is as below: class CommonVehicle(models.Model): year = models.ForeignKey(Year) series = models.ForeignKey(Series) .... def __unicode__(self): name = ''+str(self.year)+" "+str(self.series) return name

  Read the article

• Rails ActiveRecord::MultiparameterAssignmentErrors

  - by Neil Middleton

  I have the following code in my model: attr_accessor :expiry_date validates_presence_of :expiry_date, :on => :create, :message => "can't be blank" and the following in my view: <%= date_select :account, :expiry_date, :discard_day => true, :start_year => Time.now.year, :end_year => Time.now.year + 15, :order => [:month, :year] %> However, when I submit my form I get: ActiveRecord::MultiparameterAssignmentErrors in SignupController#create /Users/x/.rvm/gems/ruby-1.8.6-p383/gems/activerecord-2.3.5/lib/active_record/base.rb:3073:in `execute_callstack_for_multiparameter_attributes' /Users/x/.rvm/gems/ruby-1.8.6-p383/gems/activerecord-2.3.5/lib/active_record/base.rb:3028:in `assign_multiparameter_attributes' /Users/x/.rvm/gems/ruby-1.8.6-p383/gems/activerecord-2.3.5/lib/active_record/base.rb:2750:in `attributes=' /Users/x/.rvm/gems/ruby-1.8.6-p383/gems/activerecord-2.3.5/lib/active_record/base.rb:2438:in `initialize' Any ideas as to what the problem might be? I've looked at #93277 with no joy, so am kinda stuck. Adding day to the select does NOT resolve the issue. Any ideas?

  Read the article

• Can someone help me with m Django localization?

  - by alex

  I have a template with has text in it. It's located in /templates under my project directory. I'm trying to do Japanese now. I create a directory called "locale" in my project directory. Then, I set up this in my settings: gettext = lambda s: s LANGUAGES = ( ('de', gettext('German')), ('en', gettext('English')), ('ja', gettext('Japanese')), ) After that, I run this command: django-admin.py makemessages -l ja The only problem is, this doesn't work! In my locale/ja/LC_MESSAGES/django.po: Isn't it supposed to scan my templates with .html extension and grab all the strings? # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2010-05-20 22:45+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <[email protected]>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: settings.py:101 msgid "German" msgstr "" #: settings.py:102 msgid "English" msgstr "" #: settings.py:103 msgid "Japanese" msgstr ""

  Read the article

• Beyond core java

  - by Paul

  Coming to the end of the first year of my CS degree, we've done some Java but just the core stuff; manipulating strings and arrays, inheritance, implementing logic etc. I visit this website daily and I see so much stuff that is beyond me; using frameworks; managing databases etc. It makes me feel like I've just learned the syntax of Java, and there is so much more to do with it. My question is though, how do I get there? I don't think I'm advanced enough to join an open source project, which seems to be suggested often (though I'd love to) and I've looked at other similar questions on here (like this one) but even then I don't think that'd work for me.. firstly, could somebody try give me some commonly used frameworks etc and how and what they are used for? Where would be a good place to start? How did you get started in using the things you do? Or perhaps you think I'm going down the wrong route. Should I learn another language, and just wait until the moment occurs where it's clear what I should be doing? I'm only in the first year of my degree, so far we've lightly covered Haskell and Java, and I've done a little HTML and CSS in my free time. I know that next year we cover python, so perhaps I should just wait till then and see if I prefer that? I feel like I also risk learning something in depth and then never using it... I suppose I'm also asking for personal experiences; was there a point where you felt you'd exceeded the basic grasp of a language (does not necessarily have to be Java related) and reach a more "advanced" level? I guess I'll put subjective tag on this, but really I just want to know how to get beyond the basic understanding of a language.

  Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >