Search Results

Search found 1753 results on 71 pages for 'peter nelson'.

Page 52/71 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • How Do I grep For non-ASCII Characters in UNIX

    - by Peter Conrey
    I have several very large XML files and I'm trying to find the lines that contain non-ASCII characters. I've tried the following: grep -e "[\x{00FF}-\x{FFFF}]" file.xml But this returns every line in the file, regardless of whether the line contains a character in the range specified. Do I have the syntax wrong or am I doing something else wrong? I've also tried: egrep "[\x{00FF}-\x{FFFF}]" file.xml (with both single and double quotes surrounding the pattern).

    Read the article

  • Recursive code Sorting in VB

    - by Peter
    Ages old question: You have 2 hypothetical eggs, and a 100 story building to drop them from. The goal is to have the least number of guaranteed drops that will ensure you can find what floor the eggs break from the fall. You can only break 2 eggs. Using a 14 drop minimum method, I need help writing code that will allow me to calculate the following: Start with first drop attempt on 14th floor. If egg breaks then drop floors 1-13 to find the floor that causes break. ElseIf egg does not break then move up 13 floors to floor number 27 and drop again. If egg breaks then drop floors 15-26 starting on 15 working up to find the floor egg breaks on. ElseIf egg does not break then move up 12 floors to floor number 39 and drop again. etc. etc. The way this increases is as follows 14+13+12+11+10+9+8+7+6+5+4+3+2+1 So always adding to the previous value, by one less. I have never written a sorting algorithm before, and was curious how I might go about setting this up in a much more efficient way than a mile long of if then statements. My original idea was to store values for the floors in an array, and pull from that, using the index to move up or down and subtract or add to the variables. The most elegant solution would be a recursive function that handled this for any selected floor, 1-100, and ran the math, with an output that shows how many drops were needed in order to find that floor. Maximum is always 14, but some can be done in less.

    Read the article

  • Determining Screen Positions in Objective-C (NSScreen)

    - by Peter Zich
    Using [NSScreen screens] I'm able to get all of the screens attached to the computer and their sizes, however I'm trying to find out their positions relative to each other (like in Arrangement in the Display preferences). Is there a way to do this? I've looked online and through the class references on Apple's developer site and found nothing. Thank you.

    Read the article

  • How to set background color of a View

    - by Peter vdL
    I'm trying to set the background color of a View (in this case a Button). I use this code: // set the background to green v.setBackgroundColor(0x0000FF00 ); v.invalidate(); It causes the Button to disappear from the screen. What am I doing wrong, and what is the correct way to change the background color on any View? Thanks.

    Read the article

  • json returning string instead of object

    - by peter
    i have $age = implode(',', $wage); // which is object return: [1,4],[7,11],[15,11] $ww = json_encode($age); and then i retrieve it here var age = JSON.parse(<?php echo json_encode($ww); ?>); so if i make alert(typeof(<?php echo $age; ?>)) // object alert(typeof(age)) //string in my case JSON.parse retuned as string. how can i let json return as object? EDIT: var age = JSON.parse(<?php echo $ww; ?>); // didnt work , its something syntax error

    Read the article

  • asp.net checkbox in gridview - checked property is missing

    - by Peter PitLock
    In this asp.net gridview control, the checked property is always missing. I need to access the checked property via jquery Gridview source: <Columns> <asp:TemplateField> <ItemTemplate> <asp:CheckBox ID="chkSelected" runat="server" class="chkSummarySelection" /> </ItemTemplate> </asp:TemplateField> </Columns> Renders as : <input type="checkbox" name="ctl00$ContentPlaceHolder1$gv$ctl02$SelectedCheckBox" id="ctl00_ContentPlaceHolder1_gv_ctl02_SelectedCheckBox"> There is no checked property to access. I have tried $(".chkSummarySelection").click(function () { var chk; chk = $(this).prop("checked"); chk = $(this).attr("checked"); chk = $(this).is(":checked"); chk = $(this).attr("value"); chk = $(this).val(); chk = jQuery(this).is(':checked'); }); but nothing is working

    Read the article

  • Login Functionality For Silverlight Application

    - by peter
    Hi All, I have a silverlight application that requires the user to login. The problem is when you hit the refresh button on the web page it reloads the site, and requires the user to login again. What I want it to do is act like ASP .NET where the user will remain logged in for 20 minutes even if they hit the refresh button. What mechanism is ASP .NET using to achieve this? Does it use session variables for instance, and how does it expire after 20 minutes? Thanks.

    Read the article

  • Why can I not access this class member in python?

    - by Peter Smit
    I have the following code class Transcription(object): WORD = 0 PHONE = 1 STATE = 2 def __init__(self): self.transcriptions = [] def align_transcription(self,model,target=Transcription.PHONE): pass The important part here is that I would like to have a class member as default value for a variable. This however gives the following error: NameError: name 'Transcription' is not defined Why is this not possible and what is the right (pythonic) way to do something like this.

    Read the article

  • how to determine count of tag

    - by peter
    I have a bit of xml file named Sample.xml which is shown below <?xml version="1.0" encoding="ISO-8859-1"?> <countries> <country> <text>Norway</text> <value>N</value> </country> <country> <text>Sweden</text> <value>S</value> </country> <country> <text>France</text> <value>F</value> </country> <country> <text>Italy</text> <value>I</value> </country> </countries> i have button named submit(button1).If i click that button i need to display the count(PartitionName="AIX") in a text box named textBox1, means How many PartitionName="AIX" is belonging to Type="NIC" Can any one give me the c# code I did like this,,but not able to get the answaer private void button1_Click(object sender, EventArgs e) { XmlDocument doc1 = new XmlDocument(); doc1.Load(@"D:\New Folder\WindowsFormsApplication3\WindowsFormsApplication3\Sample.xml"); XmlNodeList a = doc1.GetElementsByTagName("AIX"); textBox1.Text = a.Count.ToString(); }

    Read the article

  • Strange behavior with large Object Types

    - by Peter Lang
    I recognized that calling a method on an Oracle Object Type takes longer when the instance gets bigger. The code below just adds rows to a collection stored in the Object Type and calls the empty dummy-procedure in the loop. Calls are taking longer when more rows are in the collection. When I just remove the call to dummy, performance is much better (the collection still contains the same number of records): Calling dummy: Not calling dummy: 11 0 81 0 158 0 Code to reproduce: Create Type t_tab Is Table Of VARCHAR2(10000); Create Type test_type As Object( tab t_tab, Member Procedure dummy ); Create Type Body test_type As Member Procedure dummy As Begin Null; --# Do nothing End dummy; End; Declare v_test_type test_type := New test_type( New t_tab() ); Procedure run_test As start_time NUMBER := dbms_utility.get_time; Begin For i In 1 .. 200 Loop v_test_Type.tab.Extend; v_test_Type.tab(v_test_Type.tab.Last) := Lpad(' ', 10000); v_test_Type.dummy(); --# Removed this line in second test End Loop; dbms_output.put_line( dbms_utility.get_time - start_time ); End run_test; Begin run_test; run_test; run_test; End; I tried with both 10g and 11g. Can anyone explain/reproduce this behavior?

    Read the article

  • iOS - Application logging test and production code

    - by Peter Warbo
    I am doing a bunch of logging when I'm testing my application which is useful for getting information about variable state and such. However I have read that you should use logging sparsely in production code (because it can potentially slow down your application). But my question is now: if my app is in production and people are using it, whenever a crash (god forbid) occurs, how will I be able to interpret the crash information if I have removed the logging statements? Then I suppose I will only have a stacktrace for me to interpret? Does this mean I should leave logging in production code only WHERE it's really essential for me to interpret what has happened? Also how will the logging statements relate to the crash reports? Will they be combined? I'm thinking of using Flurry as analytics and crash reports...

    Read the article

  • block z-positioning without z-index

    - by Peter
    Please, have a look at: http://twitter.github.com/bootstrap/base-css.html There are many examples like this one: if you look closer to the block borders, you can see that the gray block is under the white one. Using the browser's developer tools you can see that both boxes have an inherited z-index: auto; I can't reproduce this effect on my website (without using z-index). So, my question is: Why is the gray block under the white one?

    Read the article

  • PHP apache_request_headers() diagrees with reality (as confirmed by Firebug): why?

    - by Peter Howe
    I have written a web app in PHP which makes use of Ajax requests (made using YUI.util.Connect.asyncRequest). Most of the time, this works fine. The request is sent with an X-Requested-With value of XMLHttpRequest. My PHP controller code uses apache_request_headers() to check whether an incoming request is Ajax or not and all works well. But not always. Intermittently, I'm getting a situation where the Ajax request is sent (and Firebug confirms for me that the headers on the request include an X-Requested-With of XMLHttpRequest) but apache_request_headers() is not returning that header in its list. The output from when I var_dump the apache_request_headers() is as follows (note the lack of X- 'Host' => string 'peterh.labs.example.com' (length=26) 'User-Agent' => string 'Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.0.3) Gecko/2008101315 Ubuntu/8.10 (intrepid) Firefox/3.0.3' (length=105) 'Accept' => string 'text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' (length=63) 'Accept-Language' => string 'en-gb,en;q=0.5' (length=14) 'Accept-Encoding' => string 'gzip,deflate' (length=12) 'Accept-Charset' => string 'ISO-8859-1,utf-8;q=0.7,*;q=0.7' (length=30) 'Keep-Alive' => string '300' (length=3) 'Connection' => string 'keep-alive' (length=10) 'Referer' => string 'http://peterh.labs.example.com/qmail/' (length=40) 'Cookie' => string 'WORKFLOW_SESSION=55f9aff2051746851de453c1f776ad10745354f6' (length=57) 'Pragma' => string 'no-cache' (length=8) 'Cache-Control' => string 'no-cache' (length=8) But Firebug tells me: Request Headers: Host peterh.labs.example.com User-Agent Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:1.9.0.3) Gecko/2008101315 Ubuntu/8.10 (intrepid) Firefox/3.0.3 Accept text/html,application/xhtml+xml,application/xml;q=0.9,**;q=0.8 Accept-Language en-gb,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive X-Requested-With XMLHttpRequest Referer http://peterh.labs.example.com/qmail/ Cookie WORKFLOW_SESSION=55f9aff2051746851de453c1f776ad10745354f6 This mismatch is (apparently) intermittent when executing the same code. But I don't believe in "intermittent" when it comes to software! Help!

    Read the article

  • Determining if and where a photon will collide with a polygon in 3D space.

    - by Peter
    The problem is straight forward: 1) We have a photon traveling from Point 1 (x,y,z) to Point 2 (x,y,z), both of which could be located anywhere in 3D space. 2) We have a polygon that is both rotated randomly on the x-axis and/or y-axis and also located anywhere in 3D space. 3) We want to find: a) if the photon will collide with the polygon at all and b) if it does where will that be (x,y,z)? An image of the problem: http://dl.dropbox.com/u/3150177/Programming/3D/Math/Photon%20Path/Photon%20Path.png The aim of this is to calculate how the photon's path should be altered from an interaction(s) with the polygon(s). I am reading up on this subject now but I was wondering if anyone could give me a head start. Thanks in advance.

    Read the article

  • C++: Can a macro expand "abc" into 'a', 'b', 'c'?

    - by Peter Alexander
    I've written a variadic template that accepts a variable number of char parameters, i.e. template <char... Chars> struct Foo; I was just wondering if there were any macro tricks that would allow me to instantiate this with syntax similar to the following: Foo<"abc"> or Foo<SOME_MACRO("abc")> or Foo<SOME_MACRO(abc)> etc. Basically, anything that stops you from having to write the characters individually, like so Foo<'a', 'b', 'c'> This isn't a big issue for me as it's just for a toy program, but I thought I'd ask anyway.

    Read the article

  • "Forced constness" in std::map<std::vector<int>,double> > ?

    - by Peter Jansson
    Consider this program: #include <map> #include <vector> typedef std::vector<int> IntVector; typedef std::map<IntVector,double> Map; void foo(Map& m,const IntVector& v) { Map::iterator i = m.find(v); i->first.push_back(10); }; int main() { Map m; IntVector v(10,10); foo(m,v); return 0; } Using g++ 4.4.0, I get his compilation error: test.cpp: In function 'void foo(Map&, const IntVector&)': test.cpp:8: error: passing 'const std::vector<int, std::allocator<int> >' as 'this' argument of 'void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = int, _Alloc = std::allocator<int>]' discards qualifiers I would expect this error if I was using Map::const_iterator inside foo but not using a non-const iterator. What am I missing, why do I get this error?

    Read the article

  • top and left in IE6

    - by peter
    i have really problem adjusting top and left in IE6 , in all browsers just things works good. i have this css font-family: "Lucida Grande","Lucida Sans Unicode",Verdana,Arial,Helvetica,sans-serif; font-size: 12px; height: 590px; left: 50px; line-height: normal; overflow: hidden; position: relative; text-align: left; top: -42px; width: 760px; z-index: 0; EDIT this top and left i get it from javascript like that function() {H(a,{left:0,top:0}) i dont have css file to put codes. so if i change top and hight its not triggered in ie6 . its like that i do nothing . i wonder if ie6 dont handle top and left ? how can i fix this .?

    Read the article

  • How to perform a select using a WHERE NOT EXISTS

    - by Peter Bridger
    I'm using LINQ2SQL and I want to compare two tables and select all rows that are missing from one tables (based upon one of the column values). In standard SQL I would write this as: SELECT FirstName, LastName, RefId, Email FROM Users_ActiveDirectory AS ADU WHERE NOT EXISTS ( SELECT U.RefId FROM Users AS U WHERE U.RefID = ADU.RefId ) However I'm not sure how to achieve the same result using LINQ2SQL?

    Read the article

  • Asp.net 3.5 Deployment issue

    - by peter
    For deploying my website in server by using IIS 5.1,,i created virtual directory,,i browsed in to my application and selected asp.net 2.0 tab(application is framework3.5)..I reset framwork configuratio 2,0 Runtime security Policy Enterprise,Machine,User tab,,What ever things i can do i did Still also application is working properly,,but i am not able to deploy it in IIS i am getting this error If i browse Login.aspx i am getting ** Server Application Unavailable The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request. Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur. ** Is it with IIS 5.1?? Here my machine is acting as server ,It has xp professional 2002 service pack 2 and IIS 5.1

    Read the article

  • Camera Stream in Flash Problem

    - by Peter
    Please help me fill the question marks. I want to get a feed from my camera and to pass it to the receive function. Also in flash builder(in design mode) how do I put elements so they can play a camera feed?? Because as it seems VideoDisplay just doesn't work public function receive(???:???):void{ //othercam is a graphic element(VideoDisplay) othercam.??? = ????; } private function send():void{ var mycam:Camera = Camera.getCamera(); //mycam2.attachCamera(mycam); //sendstr is a stream we send sendstr.attachCamera(mycam); //we pass mycam into receive sendstr.send("receive",mycam); }

    Read the article

  • JSF myfaces dataTable , how to avoid NBSP; tags in the TDs

    - by Peter
    Hi, I have style applied to the TD elements of the dataTable of my myfaces application. td.financialReportTd { font-family: Arial; font-size: 12px; line-height: 12px; color:black; background-color: white; padding-right: 5px; text-align: right; border:0px black solid; height: 30px; padding-top:4px; padding-left:4px; vertical-align: top; direction: rtl; } Output: <td class="financialReportTd"> &nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;MY TEXT </td> No matter what I try, those NBSP tags fill up the TD and position of the text changes to the worse. I tried style text-align:right; (I need RTL text), I tried direction: rtl; Nothing helps. How can I align my text to the very right of the TD and avoid those space tags?

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >