Search Results

Search found 14079 results on 564 pages for 'folding at home'.

Page 523/564 | < Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >

• Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

  - by Gareth

  This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

  Read the article

• Oracle Open World 2012: SQL Developer Recap

  - by thatjeffsmith

  Last week was the ‘big show’ in San Francisco. I was very happy to meet many of you in person. And many of you had questions – lots of questions! We had full or overflowing rooms for our sessions and hands-on-labs. The SQL Developer ‘booths’ were also slammed several times. So exciting to see so many of YOU excited about SQL Developer. It’s very cool to hear the stories of our tools saving you and your organizations so much time (and money!) Instead of doing a Day 0 – Day 9 recap, I thought I’d share with you the questions that I heard more than once. And just for giggles, I’ll throw in some answers as well So in no particular order… What’s the difference between Oracle SQL Developer & Oracle SQL Developer Data Modeler? Mathematically speaking – two words. But as far as the actual modeling features go, there’s no difference between the two applications. The same ‘code’ or features as it pertains to data modeling and design are in both tools. However, in SQL Developer you have all of the OTHER features fighting for real estate in the UI. So I have a general rule of thumb – if you spend MOST of your time in the database, use SQL Developer. And if you spend most of your time in the data model, run the separate and dedicated program, Oracle SQL Developer Data Modeler. Here’s a couple of screenshots to drive home the UI point: Oracle SQL Developer Oracle SQL Developer Data Modeler running INSIDE of SQL Developer. Notice how the Modeler menu items fold under the file menu? Oracle SQL Developer Data Modeler Easier to navigate and manipulate your models with the stand alone modeler. Just no worksheet to run your ad-hoc queries, etc. Don’t forget you can disable the Data Modeler inside of SQL Developer via the Extensions preference page. How can I model my table partitions? Partitioning is defined via the Physical model. So after you have finished your relational model, you need to generate a physical model. Oracle SQL Developer Data Modeler Physical Model and Partitioning Open the properties for your physical model table. Enable the ‘partitioned’ property. Once you do so, the ‘Partitioning’ page will activate. Lots and lots of partitioning support and options here But what about Interval Partitioning? An extension of range partitioning in 11gR2, we don’t currently support this partitioning scheme in SQL Developer. But we’re working on it! Can SQL Developer ignore column order when comparing models? Yes! After you start a model compare, one of your options is to disregard the order of an attribute or column definition. Tell SQL Developer you don’t care when your column shows up, just as long as it DOES show up. Wow, you got a lot of questions around modeling! Is that normal? Yes! While we appreciate that many folks inherit their applications and associated designs, new applications are being ‘born’ every day. Since both of our tools are free for anyone to design their new Oracle applications with, we attract a fair amount of attention I want to do a Hands On Lab. How do I get your software and instructional guides? Go here. Download VirtualBox. Then download the VB image. Import the appliance. Start it. Connect oracle/oracle on the OEL VM. Click on ‘Start Here’ in the desktop. Follow the instructions. If you need help, ask away! You went too fast in your Tips & Tricks session. Do you have cliff notes? Yes! And you’re SO close to finding them! Just go to my SQL Developer resources page. All of my tips are documented on this blog somewhere. I’ve indexed the most popular ones on the resource page. You can use the Search dialog on the right to find the rest. Or just send me a comment or question, and I’ll do my best to answer them as they come in.

  Read the article

• How To Replace Notepad in Windows 7

  - by Trevor Bekolay

  It used to be that Notepad was a necessary evil because it started up quickly and let us catch a quick glimpse of plain text files. Now, there are a bevy of capable Notepad replacements that are just as fast, but also have great feature sets. Before following the rest of this how-to, ensure that you’re logged into an account with Administrator access. Note: The following instructions involve modifying some Windows system folders. Don’t mess anything up while you’re in there! If you follow our instructions closely, you’ll be fine. Choose your replacement There are a ton of great Notepad replacements, including Notepad2, Metapad, and Notepad++. The best one for you will depend on what types of text files you open and what you do with them. We’re going to use Notepad++ in this how-to. The first step is to find the executable file that you’ll replace Notepad with. Usually this will be the only file with the .exe file extension in the folder where you installed your text editor. Copy the executable file to your desktop and try to open it, to make sure that it works when opened from a different folder. In the Notepad++ case, a special little .exe file is available for the explicit purpose of replacing Notepad.If we run it from the desktop, it opens up Notepad++ in all its glory. Back up Notepad You will probably never go back once you switch, but you never know. You can backup Notepad to a special location if you’d like, but we find it’s easiest to just keep a backed up copy of Notepad in the folders it was originally located. In Windows 7, Notepad resides in: C:\Windows C:\Windows\System32 C:\Windows\SysWOW64 in 64-bit versions only Navigate to each of those directories and copy Notepad. Paste it into the same folder. If prompted, choose to Copy, but keep both files. You can keep your backup as “notepad (2).exe”, but we prefer to rename it to “notepad.exe.bak”. Do this for all of the folders that have Notepad (2 total for 32-bit Windows 7, 3 total for 64-bit). Take control of Notepad and delete it Even if you’re on an administrator account, you can’t just delete Notepad – Microsoft has made some security gains in this respect. Fortunately for us, it’s still possible to take control of a file and delete it without resorting to nasty hacks like disabling UAC. Navigate to one of the directories that contain Notepad. Right-click on it and select Properties.   Switch to the Security tab, then click on the Advanced button. Note that the owner of the file is a user called “TrustedInstaller”. You can’t do much with files owned by TrustedInstaller, so let’s take control of it. Click the Edit… button. Select the desired owner (you could choose your own account, but we’re going to give any Administrator control) and click OK. You’ll get a message that you need to close and reopen the Properties windows to edit permissions. Before doing that, confirm that the owner has changed to what you selected. Click OK, then OK again to close the Properties window. Right-click on Notepad and click on Properties again. Switch to the Security tab. Click on Edit…. Select the appropriate group or user name in the list at the top, then add a checkmark in the checkbox beside Full control in the Allow column. Click OK, then Yes to the dialog box that pops up. Click OK again to close the Properties window. Now you can delete Notepad, by either selecting it and pressing Delete on the keyboard, or right-click on it and click Delete.   You’re now free from Notepad’s foul clutches! Repeat this procedure for the remaining folders (or folder, on 32-bit Windows 7). Drop in your replacement Copy your Notepad replacement’s executable, which should still be on your desktop. Browse to the two or three folders listed above and copy your .exe to those locations. If prompted for Administrator permission, click Continue. If your executable file was named something other than “notepad.exe”, rename it to “notepad.exe”. Don’t be alarmed if the thumbnail still shows the old Notepad icon. Double click on Notepad and your replacement should open. To make doubly sure that it works, press Win+R to bring up the Run dialog box and enter “notepad” into the text field. Press enter or click OK. Now you can allow Windows to open files with Notepad by default with little to no shame! All without restarting or having to disable UAC! Similar Articles Productive Geek Tips Search and Replace Specific Formatting (fonts, styles,etc) in Microsoft WordHow to Drag Files to the Taskbar to Open Them in Windows 7Customize the Windows 7 or Vista Send To MenuKill Processes from the Windows Command LineChange Your Windows 7 Library Icons the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

  Read the article

• Chester Devs Presentation and source code &ndash; &lsquo;Event Store - an introduction to a DSD for event sourcing and notifications&rsquo;

  - by Liam Westley

  Originally posted on: http://geekswithblogs.net/twickers/archive/2013/11/11/chester-devs-presentation-and-source-code-ndash-lsquoevent-store.aspxThank you everyone at Chester Devs Thanks to Fran Hoey and all the people from Chester Devs. It was a hard drive up and back but the enthusiasm of the audience, with some great questions does make it worthwhile. Presentation and source code My presentation, source code, Event Store runners and text files containing the various command line parameters used for curl is now available on GitHub; https://github.com/westleyl/ChesterDevs-EventStore. Don’t worry if you don’t have a GitHub account, you don’t need one, you can just click on the Download Zip button on the right hand menu to download all the files as a single ZIP file.  If all you want is the PowerPoint presentation, go to https://github.com/westleyl/ChesterDevs-EventStore/blob/master/Powerpoint/Huddle-EventStore.pptx, and click on the View Raw button. Downloading and installing Event Store and Tools Download Event Store http://download.geteventstore.com – I unzipped these files into C:\EventStore\v2.0.1 Download Curl from http://curl.haxx.se/download.html – I downloaded Win64 Generic (with SSL) and unzipped these files into C:\curl version 7.31.0 Running the tools I used in my presentation Demonstration 1 (running Event Store) You can use one of my Event Store runner command files to run the single node version of Event Store, using default ports of 2213 for HTTP and 1113  for TCP, and with a wildcard HTTP pattern.  Both take a single command line parameter to specify the location of the data and log files.  The runners assume the single node executable is located in C:\EventStore\v2.0.1, and will placed data files and logs beneath C:\EventStore\Data, i.e. RunEventStore.cmd TestData1 This will create data files in C:\EventStore\Data\TestData1\Data and log files in C:\EventStore\Data\TestData1\logs. If, when running Event Store you may see the following message, [03288,15,06:23:00.622] Failed to start http server Access is denied You will either need to run Event Store in an administrator console window, or you can use the netsh command to create a firewall permission to allow HTTP listening (this will need to be run, once, in an administrator console window), netsh http add urlacl url=http://*:2213/ user=liam You can always delete this later by running the delete; netsh http delete urlacl url=http://*:2213/ If you want to confirm that everything is running OK, open the management console in a browser by navigating to http://127.0.0.1:2213. If at any point you are asked for a user name and password use the default of ‘admin’/‘changeit’. Demonstration 2 (reading and adding data, curl) In my second demonstration I used curl directly from the console to read streams, write events and then read back those events. On GitHub I have included is a set of curl commands, CurlCommandLine.txt, and a sample data file, SampleData.json, to load an event into a DDDNorth3 stream. As there is not much data in the Event Store at this point I used the $stats-127.0.0.1:2113 which is a stream containing performance statistics for Event Store and is updated every 30 seconds (default). Demonstration 3 (projections) On GitHub I have included a sample projection, Projection-ByRoom.txt, which will create streams based on the room on which a session was held on the DDDNorth3 agenda. Browse to the management console, http://127.0.0.1:2213.  Click on Projections, New Projection, give it a name, Sessions-ByRoom, and copy in the JavaScript in the Projection-ByRoom.txt file.  Select Continuous, tick Emit Enabled and then click on Post. It should run immediately. You may by challenged for the administration login for the management console, if so use the default user name and password; 'admin'/'changeit'. Demonstration 4 (C# client) The final demonstration was the Visual Studio 2012 project using the Event Store client – referenced directly as C:\EventStore\v2.0.1\EventStore.ClientAPI.dll, although you can switch this to the latest Event Store client NuGet package. The source code provides a console app for viewing projections with the projection manager (HTTP connection), as well as containing a full set of data for the entire DDDNorth3 agenda.  It also deals with the strategy for reading newest events backwards to older events and ignoring older events that have been superseded. Resources Event Store home page: http://www.geteventstore.com/ Event Store source code on GitHub: https://github.com/eventstore/eventstore Event Store documentation on GitHub: https://github.com/eventstore/eventstore/wiki (includes index to @RobAshton’s blog series on Event Store at https://github.com/eventstore/eventstore/wiki#rob-ashton---projections-series) Event Store forum in Google Groups: https://groups.google.com/forum/?fromgroups#!forum/event-store TopShelf Windows service wrapper is available on github: https://gist.github.com/trbngr/5083266

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience

  - by pinaldave

  Allen  Tuladhar I recently came back from my 9-day trip in Nepal and I must say that this is one of the best trips I had in my lifetime. Allen Bailochan Tuladhar is a wonderful person and an extreme enthusiast for Microsoft Technology. Allen is the Chief Executive Officer of Unlimited Technologies Pvt Ltd., Country Manager of Microsoft MDP Nepal, the Member Secretary of Nepali Language in Information Technology, and member of the Steering Committee of the Government of Nepal. He is the person who keeps the Nepal’s Tech Community constantly motivating and taking it to the next level. I have met Allen for many times before, but this was the first time I was with him in Kathmandu, Nepal. I was very impressed with the amount of the work he does in the community. During my 9 days of stay, every single day was a new lesson for me. I was amazed and overwhelmed with the many things he does every single day. Not only he does he work closely with Government of Nepal ministry, but he is also the most known person in the Student Community. His expertise in the technical subject matter is not limited to one technology; rather, I have seen him actively engaging himself in  discussions of various tech topics. Allen presending at TechMela Kathmandu, Nepal Allen is currently active in working out to localize Windows and Office and incorporate it using the Nepali language. I was able to witness and experience how the localization works, as well as the procedure on how to do such. If you know the whole localization process, you must have realized how big and daunting of a process it is. I was glad that I became a part of it. Prominent Personality of Nepal on Panel Discussion Another great opportunity I had when I was at Allen’s office is that I have learned how the radio technology talk show works. Nepali Radio station has the weekly program in their local language, in which MS technology is discussed and industry leaders are invited to talk about their experience with the technology. I found the program so interesting because it has so much variety in terms of technology subjects. Well, my understanding of Nepali language is limited but I did understand quite a bit. Ravi, Nutan, Pinal, Gandip I got the chance to meet lots of Database Professionals as well. People in Nepal are very polite even though they are very strong in their technology fundamentals. I had in-depth discussion regarding High Availability scenarios, as well Query Tuning. Database professionals from the leading financial sectors of Nepal wanted me to visit their Data Center and help them out with a few advances. In no time, Allen organized a visit for me. He sent me a Nepali-speaking expert from his own organization to accompany me in overcoming any difficulties while I was on my way helping this financial district. Pinal (SQLAuthority) and Deependra (Unlimited) When I was going to Nepal, I was really not sure if I would be able to stay busy for 9 days straight in Community-related activity. However, on the 9th day I realize that I can still stay here for more than 9 days because in every single day, I feel enthusiastic enough to do something new. Allen Bailochan Tuladhar Even though I was working  very hard every day, I hardly had the chance to work with and talk to him one-on-one for the first few days. One of the evenings, Allen invited me to his home and we discussed about his future ideas. I was really surprised to see how much a man can do for his technical community and for his country. When I asked Allen’s wife and daughter if they ever think it’s getting too much with regards to Allen putting tough efforts to the community, their answer was something I did not expect. I found out that Allen’s wife manages all the back office and logistics of the community events and his daughter manages the websites. I felt that they do not have any complain,  and instead, their whole family is in this activity as deeply as it can get, which I thought is a very good thing. Pinal and Allen I want to end this post with an interesting story that happened during our lunch hour at one of the Nepali restaurants. While we were having our lunch and having some chitchat, Allen suddenly stood up and called several people walking along the pavement. He introduced them all to me as Microsoft Student Partners. He asked all of them to order their favorite dish and called the waiter to inform that he will pick up their tab. Figuring out the question written on my face, he just said one sentence: “They are all future technology professionals who are going to make all of us proud.” I guess I have a lot of things to learn. Hats off to Allen! Pinal and Allen at Microsoft MDP Unlimited Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

  Read the article

• How to Use An Antivirus Boot Disc or USB Drive to Ensure Your Computer is Clean

  - by Chris Hoffman

  If your computer is infected with malware, running an antivirus within Windows may not be enough to remove it. If your computer has a rootkit, the malware may be able to hide itself from your antivirus software. This is where bootable antivirus solutions come in. They can clean malware from outside the infected Windows system, so the malware won’t be running and interfering with the clean-up process. The Problem With Cleaning Up Malware From Within Windows Standard antivirus software runs within Windows. If your computer is infected with malware, the antivirus software will have to do battle with the malware. Antivirus software will try to stop the malware and remove it, while the malware will attempt to defend itself and shut down the antivirus. For really nasty malware, your antivirus software may not be able to fully remove it from within Windows. Rootkits, a type of malware that hides itself, can be even trickier. A rootkit could load at boot time before other Windows components and prevent Windows from seeing it, hide its processes from the task manager, and even trick antivirus applications into believing that the rootkit isn’t running. The problem here is that the malware and antivirus are both running on the computer at the same time. The antivirus is attempting to fight the malware on its home turf — the malware can put up a fight. Why You Should Use an Antivirus Boot Disc Antivirus boot discs deal with this by approaching the malware from outside Windows. You boot your computer from a CD or USB drive containing the antivirus and it loads a specialized operating system from the disc. Even if your Windows installation is completely infected with malware, the special operating system won’t have any malware running within it. This means the antivirus program can work on the Windows installation from outside it. The malware won’t be running while the antivirus tries to remove it, so the antivirus can methodically locate and remove the harmful software without it interfering. Any rootkits won’t be able to set up the tricks they use at Windows boot time to hide themselves from the rest o the operating system. The antivirus will be able to see the rootkits and remove them. These tools are often referred to as “rescue disks.” They’re meant to be used when you need to rescue a hopelessly infected system. Bootable Antivirus Options As with any type of antivirus software, you have quite a few options. Many antivirus companies offer bootable antivirus systems based on their antivirus software. These tools are generally free, even when they’re offered by companies that specialized in paid antivirus solutions. Here are a few good options: avast! Rescue Disk – We like avast! for offering a capable free antivirus with good detection rates in independent tests. avast! now offers the ability to create an antivirus boot disc or USB drive. Just navigate to the Tools -> Rescue Disk option in the avast! desktop application to create bootable media. BitDefender Rescue CD – BitDefender always seems to receive good scores in independent tests, and the BitDefender Rescue CD offers the same antivirus engine in the form of a bootable disc. Kaspersky Rescue Disk – Kaspersky also receives good scores in independent tests and offers its own antivirus boot disc. These are just a handful of options. If you prefer another antivirus for some reason — Comodo, Norton, Avira, ESET, or almost any other antivirus product — you’ll probably find that it offers its own system rescue disk. How to Use an Antivirus Boot Disc Using an antivirus boot disc or USB drive is actually pretty simple. You’ll just need to find the antivirus boot disc you want to use and burn it to disc or install it on a USB drive. You can do this part on any computer, so you can create antivirus boot media on a clean computer and then take it to an infected computer. Insert the boot media into the infected computer and then reboot. The computer should boot from the removable media and load the secure antivirus environment. (If it doesn’t, you may need to change the boot order in your BIOS or UEFI firmware.) You can then follow the instructions on your screen to scan your Windows system for malware and remove it. No malware will be running in the background while you do this. Antivirus boot discs are useful because they allow you to detect and clean malware infections from outside an infected operating system. If the operating system is severely infected, it may not be possible to remove — or even detect — all the malware from within it. Image Credit: aussiegall on Flickr     

  Read the article

• DDD North 3 Presentation and source code &ndash; &lsquo;Event Store - an introduction to a DSD for event sourcing and notifications&rsquo;

  - by Liam Westley

  Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/15/ddd-north-3-presentation-and-source-code-ndash-lsquoevent-store.aspxThank you everyone at DDD North Thanks to all the people who helped organise the cracking conference that is DDD North 3, returning to Sunderland, and the great facilities at the University of Sunderland, and the fine drinks reception at Sunderland Software City.  The whole event wouldn’t be possible without the sponsors who ensured over 400 people were kept fed and watered so they could enjoy the impressive range of sessions. And lastly, a thank you to all those delegates who gave up their free time on a Saturday to spend a day dashing between lecture rooms, including a late change to my room which saw 40 people having to brave a journey between buildings in the fine drizzle. The enthusiasm from the delegates always helps recharge my geek batteries. Presentation and source code My presentation, source code, Event Store runners and text files containing the various command line parameters used for curl is now available on GitHub; https://github.com/westleyl/DDDNorth3-EventStore. Don’t worry if you don’t have a GitHub account, you don’t need one, you can just click on the Download Zip button on the right hand menu to download all the files as a single ZIP file.  If all you want is the PowerPoint presentation, go to https://github.com/westleyl/DDDNorth3-EventStore/blob/master/Powerpoint/DDDNorth-EventStore.pptx, and click on the View Raw button. Downloading and installing Event Store and Tools Download Event Store http://download.geteventstore.com – I unzipped these files into C:\EventStore\v2.0.1 Download Curl from http://curl.haxx.se/download.html – I downloaded Win64 Generic (with SSL) and unzipped these files into C:\curl version 7.31.0 Running the tools I used in my presentation Demonstration 1 (running Event Store) You can use one of my Event Store runner command files to run the single node version of Event Store, using default ports of 2213 for HTTP and 1113  for TCP, and with a wildcard HTTP pattern.  Both take a single command line parameter to specify the location of the data and log files.  The runners assume the single node executable is located in C:\EventStore\v2.0.1, and will placed data files and logs beneath C:\EventStore\Data, i.e. RunEventStore.cmd TestData1 This will create data files in C:\EventStore\Data\TestData1\Data and log files in C:\EventStore\Data\TestData1\logs. If, when running Event Store you may see the following message, [03288,15,06:23:00.622] Failed to start http server Access is denied You will either need to run Event Store in an administrator console window, or you can use the netsh command to create a firewall permission to allow HTTP listening (this will need to be run, once, in an administrator console window), netsh http add urlacl url=http://*:2213/ user=liam You can always delete this later by running the delete; netsh http delete urlacl url=http://*:2213/ If you want to confirm that everything is running OK, open the management console in a browser by navigating to http://127.0.0.1:2213. If at any point you are asked for a user name and password use the default of ‘admin’/‘changeit’.   Demonstration 2 (reading and adding data, curl) In my second demonstration I used curl directly from the console to read streams, write events and then read back those events. On GitHub I have included is a set of curl commands, CurlCommandLine.txt, and a sample data file, SampleData.json, to load an event into a DDDNorth3 stream. As there is not much data in the Event Store at this point I used the $stats-127.0.0.1:2113 which is a stream containing performance statistics for Event Store and is updated every 30 seconds (default). Demonstration 3 (projections) On GitHub I have included a sample projection, Projection-ByRoom.txt, which will create streams based on the room on which a session was held on the DDDNorth3 agenda. Browse to the management console, http://127.0.0.1:2213.  Click on Projections, New Projection, give it a name, Sessions-ByRoom, and copy in the JavaScript in the Projection-ByRoom.txt file.  Select Continuous, tick Emit Enabled and then click on Post. It should run immediately. You may by challenged for the administration login for the management console, if so use the default user name and password; 'admin'/'changeit'.   Demonstration 4 (C# client) The final demonstration was the Visual Studio 2012 project using the Event Store client – referenced directly as C:\EventStore\v2.0.1\EventStore.ClientAPI.dll, although you can switch this to the latest Event Store client NuGet package. The source code provides a console app for viewing projections with the projection manager (HTTP connection), as well as containing a full set of data for the entire DDDNorth3 agenda.  It also deals with the strategy for reading newest events backwards to older events and ignoring older events that have been superseded. Resources Event Store home page: http://www.geteventstore.com/ Event Store source code on GitHub: https://github.com/eventstore/eventstore Event Store documentation on GitHub: https://github.com/eventstore/eventstore/wiki (includes index to @RobAshton’s blog series on Event Store at https://github.com/eventstore/eventstore/wiki#rob-ashton---projections-series) Event Store forum in Google Groups: https://groups.google.com/forum/?fromgroups#!forum/event-store TopShelf Windows service wrapper is available on github: https://gist.github.com/trbngr/5083266

  Read the article

• Multitask Like a Pro with AquaSnap

  - by Matthew Guay

  Are you tired of shuffling back and forth between windows?  Here’s a handy app that can help you keep all of your windows organized and accessible. AquaSnap is a great free utility that helps you use multiple windows at the same time easily and efficiently.  One of Windows 7’s greatest new features is Aero Snap, which lets you easily view windows side by side by simply dragging windows to side of your screen.  After using Windows 7 for the past year, Aero Snap is one of the features we really miss when using older versions of Windows. With AquaSnap, you now have all of the features of Aero Snap and more in Windows 2000, XP, Vista, and of course Windows 7.  Not only does it give you Aero Snap features, but AquaSnap also gives you more control over your windows to make you more productive. Getting Started AquaSnap is a a free download for Windows 2000, XP, Vista, and 7.  Download the small installer (link below) and install it with the default settings. AquaSnap automatically runs as soon as it is installed, and you will notice a new icon in your system tray. Now you can go ahead and put it to use.  Drag a window to any edge or corner of your desktop, and you will see an icon showing what part of the screen the window will cover. Dragging it to the side of the screen expanded the window to fill the right half of the screen, just like the default Aero Snap in Windows 7.  You can drag the window away to restore it to its former size. AquaSnap works on any corner of the screen too, so you can have 4 windows side-by-side.  We already have 3 windows snapped to the corners, and notice that we’re dragging a fourth window to the bottom right corner. You can also snap windows to the bottom and top of the screen.  Here we have Word snapped to the bottom half of the screen, and we’re dragging Chrome to the top. You can even snap internal windows in Multiple Document Interface (MDI) programs such as Excel.  Here we are snapping a workbook in Excel to the left to view 2 workbooks side-by-side.   Additionally, AquaSnap lets you keep any window always on top.  Simply shake any window, and it will turn semi-transparent and stay on top of all other windows.  Notice the transparent calculator here on top of Excel. All of AquaSnap’s features work great in Windows 2000, XP, and Vista too.  Here we are snapping IE6 to the left of the screen in XP. Here are 3 windows snapped to the sides in XP.  You can mix the snap modes, and have, for instance, two windows on the right side and one window on the left.  This is a great way to maximize productivity if you need more space in one of the windows. Even AquaShake works to keep a window transparent and on top in XP. Settings AquaSnap has a detailed settings dialog where you can tweak it to work exactly like you want.  Simply right-click on its icon in the taskbar, and select Settings. From the first screen, you can choose if you want AquaSnap to start with Windows, and if you want it to show an icon in the system tray.  If you turn off the system tray icon, you can access the AquaSnap settings from Start > All Programs > AquaSnap > Configuration (or simply search for Configuration in Vista or Windows 7). The second tab in settings lets you choose what you want each snapping region to do.  You can also choose two other presets, including AeroSnap (which works just like the default Aero Snap in Windows 7) and AquaSnap simple (which only snaps at the edges of the screen, not the corners). The third tab lets you increase or decrease the opacity of pinned windows when using AquaShake, and also lets you increase or decrease the shaking sensitivity.  Additionally, if you prefer the standard AeroShake functionality, which minimizes all other open windows when you shake a window, you can choose that too. The fourth tab lets you activate an optional feature, AquaGlass.  If you activate this, it will make windows turn transparent when you drag them across the screen.   Finally, the last tab lets you change the color and opacity of the preview rectangle, or simply turn it off. Or, if you want to temporarily turn AquaSnap off, simply right-click on its icon and select Off.  In Windows 7, turning off AquaSnap will restore your standard Windows Aero Snap functionality, and in other version of Windows it will stop letting you snap windows at all.  You can then repeat the steps and select On when you want to use AquaSnap again. Conclusion AquaSnap is a handy tool to make you more productive at your computer.  With a wide variety of useful features, there’s something here for everyone.  Download AquaSnap Similar Articles Productive Geek Tips How to Get Virtual Desktops on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

  Read the article

• Use Advanced Font Ligatures in Office 2010

  - by Matthew Guay

  Fonts can help your documents stand out and be easier to read, and Office 2010 helps you take your fonts even further with support for OpenType ligatures, stylistic sets, and more.  Here’s a quick look at these new font features in Office 2010. Introduction Starting with Windows 7, Microsoft has made an effort to support more advanced font features across their products.  Windows 7 includes support for advanced OpenType font features and laid the groundwork for advanced font support in programs with the new DirectWrite subsystem.  It also includes the new font Gabriola, which includes an incredible number of beautiful stylistic sets and ligatures. Now, with the upcoming release of Office 2010, Microsoft is bringing advanced typographical features to the Office programs we love.  This includes support for OpenType ligatures, stylistic sets, number forms, contextual alternative characters, and more.  These new features are available in Word, Outlook, and Publisher 2010, and work the same on Windows XP, Vista and Windows 7. Please note that Windows does include several OpenType fonts that include these advanced features.  Calibri, Cambria, Constantia, and Corbel all include multiple number forms, while Consolas, Palatino Linotype, and Gabriola (Windows 7 only) include all the OpenType features.  And, of course, these new features will work great with any other OpenType fonts you have that contain advanced ligatures, stylistic sets, and number forms. Using advanced typography in Word To use the new font features, open a new document, select an OpenType font, and enter some text.  Here we have Word 2010 in Windows 7 with some random text in the Gabriola font.  Click the arrow on the bottom of the Font section of the ribbon to open the font properties. Alternately, select the text and click Font. Now, click on the Advanced tab to see the OpenType features. You can change the ligatures setting… Choose Proportional or Tabular number spacing… And even select Lining or Old-style number forms. Here’s a comparison of Lining and Old-style number forms in Word 2010 with the Calibri font. Finally, you can choose various Stylistic sets for your font.  The dialog always shows 20 styles, whether or not your font includes that many.  Most include only 1 or 2; Gabriola includes 6. Here’s lorem ipsum text, using the Gabriola font with Stylistic set 6. Impressive, huh?  The font ligatures change based on context, so they will automatically change as you are typing.  Watch the transition as we typed the word Microsoft in Word with Gabriola stylistic set 6. Here’s another example, showing the fi and tt ligatures in Calibri. These effects work great in Word 2010 in XP, too. And, since Outlook uses Word as it’s editing engine, you can use the same options in Outlook 2010.  Note that these font effects may not show up the same if the recipient’s email client doesn’t support advanced OpenType typography.  It will, of course, display perfectly if the recipient is using Outlook 2010. Using advanced typography in Publisher 2010 Publisher 2010 includes the same advanced font features.  This is especially nice for those using Publisher for professional layout and design.  Simply insert a text box, enter some text, select it, and click the arrow on the bottom of the font box as in Word to open the font properties. This font options dialog is actually more advanced than Word’s font options.  You can preview your font changes on sample text right in the properties box.  You can also choose to add or remove a swash from your characters.   Conclusion Advanced typographical effects are a welcome addition to Word and Publisher 2010, and they are very impressive when coupled with modern fonts such as Gabriola.  From designing elegant headers to using old-style numbers, these features are very useful and fun. Do you have a favorite OpenType font that includes advanced typographical features?  Let us know in the comments! More Reading Advances in typography in Windows 7 – Engineering 7 Blog New features in Microsoft Word 2010 Similar Articles Productive Geek Tips Change the Default Font in Excel 2007Ask the Readers: Do You Use a Laptop, Desktop, or Both?Keep Websites From Using Tiny Fonts in SafariAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteFriday Fun: Desktop Tower Defense Pro TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users

  Read the article

• Add Hotmail & Live Email Accounts to Outlook 2010

  - by Matthew Guay

  Microsoft has recently been promoting upcoming updates to their Hotmail service, promising to make it an even better webmail service. But Microsoft’s revamped Outlook 2010 is already here. Here’s how to integrate Hotmail with Outlook. Outlook 2010 works with a wide variety of email accounts, including POP3, IMAP, and Exchange accounts.  The only problem with POP3 and IMAP accounts is that they only sync email, but not your calendar and contacts like Exchange does.  Hotmail, however, lets you sync your email, contacts, and calendar with Outlook with the Hotmail Connector.  This lets you keep all of your PIM data accessible from everywhere.  Let’s look at how we can set this up on our account. Getting Started The easiest way to add Hotmail to Outlook is to first install the Outlook Hotmail Connector (link below).  Make sure Outlook is closed first, and then proceed with the installation as usual. If you enter your Hotmail account into the New Account setup in Outlook before installing the Hotmail Connector, Outlook will prompt you to download the Hotmail Connector.  However, you’ll have to exit Outlook before you can install the Connector, and then will have to re-enter your information when you restart Outlook, so it’s easier to just install it first. Add Your Hotmail Account to Outlook Now you’re ready to add your Hotmail account to Outlook.  If this is the first time you’ve run Outlook 2010, you’ll be greeted with the following screen.  Click Next to proceed with setup. Then select Yes and click Next again. If you’ve already got an email account setup in Outlook, you can add a new account by clicking File and then selecting Add account. Now, enter your Hotmail account information, and click Next. Outlook will search for your account settings and automatically setup your account with the Hotmail connector we previously installed. If you entered your password incorrectly previously, you may see the following popup.  Re-enter your password and click OK, and Outlook will re-verify your settings. Once everything’s finished and setup, you’ll see the following completion screen.  Click Finish to complete the setup and check out your Hotmail in Outlook. Welcome to your Hotmail account in Outlook 2010.  You’ll notice a small notification at the bottom of the window notifying you that you’re connected to Windows Live Hotmail.  Now your email will synchronize with your Hotmail account, and your Outlook calendar and contacts will be synced with your Live calendar and contacts, respectively.  This is the closest you can get to full Exchange without an Exchange account, and in our experience it works great.  In fact, Hotmail Sync seems to work faster than IMAP sync for us. Setup Hotmail With POP3 Access If you need to access your Hotmail email account but don’t want to install the Outlook Connector, then you can add it with POP3 sync.  We recommend going with the Outlook Connector for the best experience, but if you can’t install it (eg. you’re not allowed to install applications on your work PC) then this is a good alternative. To do this, follow our tutorial on setting up a Gmail POP3 account in Outlook. Although the article concentrates on Gmail, the settings are essentially the same. The only thing you’ll want to change is the Incoming and Outgoing mail server. Incoming mail server – pop3.live.com Outgoing mail server – smtp.live.com User name – your Hotmail or Live email address Incoming Server (POP3) – 995 Outgoing Server (SMTP) – 587 Also, check This server requires and encrypted connection Just as in the Gmail example, select TLS for the type of encrypted connection.  Then, on the bottom, make sure to uncheck the box to Remove messages from the server after a number of days.  This way your messages will still be accessible from your Hotmail account online. Conclusion Even though Hotmail is generally not as popular as Gmail, it works great with Outlook integration.  If you’re a heavy user of Windows Live services, or want to try them out, Outlook Connector is the easiest way to keep your desktop activity synced with the cloud.  If you’re just one of the millions of Hotmail users who want to access their old Hotmail account alongside their other accounts, this method works great for you too. If you’re using Outlook 2003 or 2007, check out our article on using Hotmail from Microsoft Outlook. Links Download Outlook Hotmail Connector 32-bit Download Outlook Hotmail Connector 64-bit – note, only for users of Office 2010 x64 Similar Articles Productive Geek Tips Use Hotmail from Microsoft OutlookHow to add any POP3 Email Account to HotmailHow to Send and Receive Hotmail from Your Gmail AccountAdd Your Gmail To Windows Live MailManage Your Windows Live Account in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• Play Your Favorite DOS Games in XP, Vista, and Windows 7

  - by Matthew Guay

  Want to take a trip down memory lane with old school DOS games?  D-Fend Reloaded makes it easy for you to play your favorite DOS games directly on XP, Vista, and Windows 7. D-Fend Reloaded is a great frontend for DOSBox, the popular DOS emulator.  It lets you install and run many DOS games and applications directly from its interface without ever touching a DOS prompt.  It works great on XP, Vista, and Windows 7 32 & 64-bit versions.   Getting Started Download D-Fend Reloaded (link below), and install with the default settings.  You don’t need to install DOSBox, as D-Fend Reloaded will automatically install all the components you need to run DOS games on Windows. D-Fend Reloaded can also be installed as a portable application, so you can run it from a flash drive on any Windows computer by selecting User defined installation. Then select Portable mode installation. Once D-Fend Reloaded is installed, you can go ahead and open the program. Then simply click “Accept all settings” to apply the default settings.   D-Fend is now ready to run all of your favorite DOS games. Installing DOS Games and Applications: To install a DOS game or application, simply drag-and-drop a zip file of the app into D-Fend Reloaded’s window.  D-Fend Reloaded will automatically extract the program… Then will ask you to name the application and choose where to store it — by default it uses the name of the DOS app. Now you’ll see a new entry for the app you just installed.  Simply double-click to run it.   D-Fend will remind you that you can switch out of fullscreen mode by pressing Alt+Enter, and can also close the DOS application by pressing Ctrl+F9.  Press Ok to run the program. Here we’re running Ms. PacPC, a remake of the classic game Ms. Pac-Man, in full-screen mode.  All features work automatically, including sound, and you never have to setup anything from DOS command line — it just works. Here it’s in windowed mode running on Windows 7. Please note that your color scheme may change to Windows Basic while running DOS applications. You can run DOS application just as easily.  Here’s Word 5.5 running in in DOSBox through D-Fend Reloaded… Game Packs: Want to quickly install many old DOS freeware and trial games?  D-Fend Reloaded offers several game packs that let you install dozens of DOS games with only four clicks…just download and run the game pack installer of your choice (link below). Now you’ve got a selection of DOS games to choose from. Here’s a group of poor lemmings walking around … in Windows 7. Conclusion D-Fend Reloaded gives you a great way to run your favorite DOS games and applications directly from XP, Vista, and Windows 7.  Give it a try, and relive your DOS days from the comfort of your Windows desktop. What were some of your favorite DOS games and applications? Leave a comment and let us know. Links Download D-Fend Reloaded Download DOS game packs for D-Fend Reloaded Download Ms. Pac-PC Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Go Retro with PacmanThursday’s Pre-Holiday Lazy Links RoundupFriday Fun: Five More Time Wasting Online GamesFriday Fun: Holiday Themed Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

  Read the article

• Protecting offline IRM rights and the error "Unable to Connect to Offline database"

  - by Simon Thorpe

  One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Nerdstock 2012: A photo review of Microsoft TechEd North America 2012

  - by The Un-T Guy

  Not only could I not fathom that I would ever be attending a tech event of the magnitude of TechEd, neither could any of my co-workers.  As the least technical person in the history of Information Technology ever, I felt as though I were walking into the belly of the beast, fearing I’d not be allowed out until I could write SSIS packages, program in Visual Basic, or at least arm wrestle a DBA.  Most of my fears were unrealized.   But I made it.  I was here.  I even got to wear the Mark of the Geek neck package with schedule, eyeglass cleaners, name badge (company name obfuscated so they don’t fire me), and a pen.  The name  badge was seemingly the key element, as every vendor in the place wanted to scan it to capture name, email address, and numbers to show their bosses back home.  It also let me eat the food and drink the coffee so that’s a fair trade.   A recurring theme throughout the presentations and vendor demos was “the Cloud” and BYOD (bring your own device).  The below was a common site throughout the week, as attendees from all over the world brought their own devices and were able to (seemingly) seamlessly connect to the Worldwide Innerwebs.  Apparently proof that Microsoft and the event organizers were practicing what they were preaching.   “Cavernous” is one way to describe the downstairs facility itself.  “Freaking cavernous” might be more accurate.  Work sessions were held in classrooms on the second and third floors but the real action was happening downstairs.  Microsoft bookstore, blogger hub (shoutout to Geekswithblogs.net), The Wall (sans Pink Floyd, sadly), couches, recharging stations…   …a game zone with pool and air hockey tables, pinball machines, foosball…   …vintage video games…           …and a even giant chess board.  Looked like this guy was opening with the Kaspersky parry.   The blend of technology and fantasy even went so far as to bring childhood favorites to life.  Assuming, of course, your childhood was pre-video games (like mine) and you were stuck with electric football and Rock ‘em Sock ‘em robots:   And, lest the “combatants” become unruly or – God forbid – afternoon snacks were late, Orange County’s finest was on the scene to keep the peace.  On a high-tech mode of transport, of course.   She wasn’t the only one to think this was a swell way to transition from one concourse to the next.  Given the level of support provided by the entire Orange County Convention Center staff, I knew they had to have some secret.   Here’s one entrance to the vendor zone/”Technical Learning Center.”  Couldn’t help but think of them as the remora attached to the Whale Shark that is Microsoft…   …or perhaps planets orbiting the sun. Microsoft is just that huge and it seemed like every vendor in the industry looks forward to partnering with the tech behemoth.   Aside from the free stuff from the vendors, probably the most popular place in the house was the dining area.  Amazing spreads every day, multiple times a day.  While no attendance numbers were available at press time, literally thousands of attendees were fed, and fed well, every day.  And lest you think my post from earlier in the week exaggerated about the backpacks…   …or that I’m exaggerating about the lunch crowds.  This represents only about between 25-30% of the lunch crowd – it was all my camera could capture at once.  No one went away hungry.   The only thing missing was a a vat of Red Bull but apparently organizers went old school, with probably 100 urns of the original energy drink – coffee – all around the venue.   Of course, following lunch and afternoon sessions, some preferred the even older school method of re-energizing.  There were rumors that Microsoft was serving graham crackers and milk in this area.  But they were only rumors.   Cannot overstate the wonderful service provided by the Orange County Convention Center staff.  Coffee, soft drinks, juice, and water were available always.  Buffet meals were delicious with a wide range of healthy options available, in addition to hundreds (at least) special meal requests supported every day.  Ever tried to keep up with an estimated 9,000 hungry and thirsty IT-ers?  These folks did.  Kudos to all of the staff and many thanks!   And while I occasionally poke fun at the Whale Shark, if nothing else this experience convinced me of one thing:  Microsoft knows how to put on a professional event.  Hundreds of informative, professionally delivered sessions, covering a wide range of topics set at varying levels of expertise (some that even I was able to follow), social activities, vendor partnerships…they brought everything you could ask for to inform, educate, and inspire an entire IT industry.   So as I depart the belly of the beast, I can both take pride in the fact that I survived the week and marvel at the brilliance surrounding me.  The IT industry – or at least the segment associated with Microsoft – is in good, professional hands.  And what won’t fit in their hands can be toted in the Microsoft provided backpacks.  Win-win.   Until New Orleans…

  Read the article

• Logical Domain Modeling Made Simple

  - by Knut Vatsendvik

  How can logical domain modeling be made simple and collaborative? Many non-technical end-users, managers and business domain experts find it difficult to understand the visual models offered by many UML tools. This creates trouble in capturing and verifying the information that goes into a logical domain model. The tools are also too advanced and complex for a non-technical user to learn and use. We have therefore, in our current project, ended up with using Confluence as tool for designing the logical domain model with the help of a few very useful plugins. Big thanks to Ole Nymoen and Per Spilling for their expertise in this field that made this posting possible. Confluence Plugins Here is a list of Confluence plugins used in this solution. Install these before trying out the macros used below. Plugin Description Copy Space Allows a space administrator to copy a space, including the pages within the space Metadata Supports adding metadata to Wiki pages Label Manages labeling of pages Linking Contains macros for linking to templates, the dashboard and other Table Enhances the table capability in Confluence Creating a Confluence Space First we need to create a new confluence space for the domain model. Click the link Create a Space located below the list of spaces on the Dashboard. Please contact your Confluence administrator is you do not have permissions to do this.   For illustrative purpose all attributes and entities in this posting are based on my imaginary project manager domain model. When a logical domain model is good enough for being implemented, do a copy of the Confluence Space (see Copy Space plugin). In this way you create a stable version of the logical domain model while further design can continue with the new copied space. Typical will the implementation phase result in a database design and/or a XSD schema design. Add Space Templates Go to the Home page of your Confluence Space. Navigate to the Browse drop-down menu and click on Advanced. Then click the Templates option in the left navigation panel. Click Add New Space Template to add the following three templates. Name: attribute {metadata-list} || Name | | || Type | | || Format | | || Description | | {metadata-list} {add-label:attribute} Name: primary-type {metadata-list} || Name | || || Type | || || Format | || || Description | || {metadata-list} {add-label:primary-type} Name: complex-type {metadata-list} || Name | || || Description |  || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | {add-label:complex-type,entity} The metadata-list macro (see Metadata plugin) will save a list of metadata values to the page. The add-label macro (see Label plugin) will automatically label the page. Primary Types Page Our first page to add will act as container for our primary types. Switch to Wiki markup when adding the following content to the page. | (+) {add-page:template=primary-type|parent=@self}Add new primary type{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|root=@self|pages=@descendents} Once the page is created, click the Add new primary type (create-page macro) to start creating a new pages. Here is an example of input to the LocalDate page. Embrace the LocalDate with square brackets [] to make the page linkable. Again switch to Wiki markup before editing. {metadata-list} || Name | [LocalDate] || || Type | Date || || Format | YYYY-MM-DD || || Description | Date in local time zone. YYYY = year, MM = month and DD = day || {metadata-list} {add-label:primary-type} The metadata-report macro will show a tabular report of all child pages.   Attributes Page The next page will act as container for all of our attributes. | (+) {add-page:template=attribute|parent=@self|title=attribute}Add new attribute{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|pages=@descendants} Here is an example of input to the startDate page. {metadata-list} || Name | [startDate] || || Type | [LocalDate] || || Format | {metadata-from:LocalDate|Format} || || Description | The projects start date || {metadata-list} {add-label:attribute} Using the metadata-from macro we fetch the text from the previously created LocalDate page. Complex Types Page The last page in this example shows how attributes can be combined together to form more complex types.   h3. Intro Overview of complex types in the domain model. | (+) {add-page:template=complex-type|parent=@self}Add a new complex type{add-page}\\ | {metadata-report:Name,Description|sort=Name|root=@self|pages=@descendents} Here is an example of input to the ProjectType page. {metadata-list} || Name | [ProjectType] || || Description | Represents a project || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [projectId] | {metadata-from:projectId|Type} | {metadata-from:projectId|Format} | {metadata-from:projectId|Description} | | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | | [description] | {metadata-from:description|Type} | {metadata-from:description|Format} | {metadata-from:description|Description} | | [startDate] | {metadata-from:startDate|Type} | {metadata-from:startDate|Format} | {metadata-from:startDate|Description} | {add-label:complex-type,entity} Gives us this Conclusion Using a web-based corporate Wiki like Confluence to create a logical domain model increases the collaboration between people with different roles in the enterprise. It’s my believe that this helps the domain model to be more accurate, and better documented. In our real project we have more pages than illustrated here to complete the documentation. We do also still use UML tools to create different types of diagrams that Confluence do not support. As a last tip, an ImageMap plugin can make those diagrams clickable when used in pages. Enjoy!

  Read the article

• Add Your Gmail Account to Outlook 2010 using POP

  - by Matthew Guay

  Are you excited about the latest version of Outlook, and want to get it setup with your Gmail accounts?  Here’s how you can easily add your Gmail account using POP to Outlook 2010. Getting Started Log into your Gmail account an go to your settings page. Under the Forwarding and POP/IMAP tab make sure POP is enabled.  You can choose to enable POP access for all new mail that arrives from now on, or for all mail in your Gmail account.  On the second option, we suggest you chose keep Gmail’s copy in the Inbox so you can still access your emails on the Gmail server.   Add Your Account to Outlook 2010 If you haven’t run Outlook 2010 yet, click Next to start setup and add your email account. Select Yes to add an email account to Outlook.  Now you’re ready to start entering your settings to access your email. Or, if you’ve already been using Outlook and want to add a new POP account, click File and then select Add Account under Account Information.   Outlook 2010 can often automatically find and configure your account with just your email address and password, so enter these and click Next to let Outlook try to set it up automatically. Outlook will now scan for the settings for your email account. If Outlook was able to find settings and configure your account automatically, you’ll see this success screen.  Depending on your setup, Gmail is automatically setup, but sometimes it fails to find the settings.  If this is the case, we’ll go back and manually configure it. Manually Configure Outlook for Gmail Back at the account setup screen, select Manually configure server settings or additional server types and click Next. Select Internet E-mail and then click Next. Enter your username, email address, and log in information. Under Server information enter in the following: Account Type: POP3 Incoming mail server: pop.gmail.com Outgoing mail server: smtp.gmail.com Make sure to check Remember password so you don’t have to enter it every time. After that data is entered in, click on the More Settings button. Select the Outgoing Server tab, and check My outgoing server (SMTP) requires authentication.  Verify Use same settings as my incoming mail server is marked as well. Next select the Advanced tab and enter the following information: Incoming Server (POP3): 995 Outgoing server (SMTP): 587 Check This server requires an encrypted connection (SSL) Set Use the following type of encrypted connection to TLS You also might want to uncheck the box to Remove messages from the server after a number of days.  This way your messages will still be accessible from Gmail online. Click OK to close the window, and then click Next to finish setting up the account.  Outlook will test your account settings to make sure everything will work; click Close when this is finished. Provided everything was entered in correctly, you’ll be greeted with a successful setup message…click Finish.   Gmail will be all ready to sync with Outlook 2010.  Enjoy your Gmail account in Outlook, complete with fast indexed searching, conversation view, and more! Conclusion Adding Gmail using the POP setting to Outlook 2010 is usually easy and only takes a few steps.  Even if you have to enter your settings manually, it is still a fairly simple process. You can add multiple email accounts using POP3 if you wish, and if you’d like to sync IMAP accounts, check out our tutorial on setting up Gmail using IMAP in Outlook 2010. Similar Articles Productive Geek Tips Add Your Gmail To Windows Live MailAdd Your Gmail Account to Outlook 2007Use Gmail IMAP in Microsoft Outlook 2007Figure out which Online accounts are selling your email to spammersAdd Your Gmail Account to Outlook 2010 Using IMAP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help.

  - by adam.hawley

  Between all the press coverage on the unauthorized release of 251,287 diplomatic documents and on previous extensive releases of classified documents on the events in Iraq and Afghanistan, one could be forgiven for thinking massive leaks are really an issue for governments, but it is not: It is an issue for corporations as well. In fact, corporations are apparently set to be the next big target for things like Wikileaks. Just the threat of such a release against one corporation recently caused the price of their stock to drop 3% after the leak organization claimed to have 5GB of information from inside the company, with the implication that it might be damaging or embarrassing information. At the moment of this blog anyway, we don't know yet if that is true or how they got the information but how did the diplomatic cable leak happen? For the diplomatic cables, according to press reports, a private in the military, with some appropriate level of security clearance (that is, he apparently had the correct level of security clearance to be accessing the information...he reportedly didn't "hack" his way through anything to get to the documents which might have raised some red flags...), is accused of accessing the material and copying it onto a writeable CD labeled "Lady Gaga" and walking out the door with it. Upload and... Done. In the same article, the accused is quoted as saying "Information should be free. It belongs in the public domain." Now think about all the confidential information in your company or non-profit... from credit card information, to phone records, to customer or donor lists, to corporate strategy documents, product cost information, etc, etc.... And then think about that last quote above from what was a very junior level person in the organization...still feeling comfortable with your ability to control all your information? So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work? A major first step it to make it physically, logistically much harder to walk away with the information. If the user with malicious intent has no way to copy to removable or moble media (USB sticks, thumb drives, CDs, DVDs, memory cards, or even laptop disk drives) then, as a practical matter it is much more difficult to physically move the information outside the firewall. But how can you control access tightly and reliably and still keep your hundreds or even thousands of users productive in their daily job? Oracle Desktop Virtualization products can help.Oracle's comprehensive suite of desktop virtualization and access products allow your applications and, most importantly, the related data, to stay in the (highly secured) data center while still allowing secure access from just about anywhere your users need to be to be productive.  Users can securely access all the data they need to do their job, whether from work, from home, or on the road and in the field, but fully configurable policies set up centrally by privileged administrators allow you to control whether, for instance, they are allowed to print documents or use USB devices or other removable media.  Centrally set policies can also control not only whether they can download to removable devices, but also whether they can upload information (see StuxNet for why that is important...)In fact, by using Sun Ray Client desktop hardware, which does not contain any disk drives, or removable media drives, even theft of the desktop device itself would not make you vulnerable to data loss, unlike a laptop that can be stolen with hundreds of gigabytes of information on its disk drive.  And for extreme security situations, Sun Ray Clients even come standard with the ability to use fibre optic ethernet networking to each client to prevent the possibility of unauthorized monitoring of network traffic.But even without Sun Ray Client hardware, users can leverage Oracle's Secure Global Desktop software or the Oracle Virtual Desktop Client to securely access server-resident applications, desktop sessions, or full desktop virtual machines without persisting any application data on the desktop or laptop being used to access the information.  And, again, even in this context, the Oracle products allow you to control what gets uploaded, downloaded, or printed for example.Another benefit of Oracle's Desktop Virtualization and access products is the ability to rapidly and easily shut off user access centrally through administrative polices if, for example, an employee changes roles or leaves the company and should no longer have access to the information.Oracle's Desktop Virtualization suite of products can help reduce operating expense and increase user productivity, and those are good reasons alone to consider their use.  But the dynamics of today's world dictate that security is one of the top reasons for implementing a virtual desktop architecture in enterprises.For more information on these products, view the webpages on www.oracle.com and the Oracle Technology Network website.

  Read the article

• WP7 “Phantom Data” Source Possibly Revealed?

  - by Bil Simser

  Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

  Read the article

• Help Protect Your Children with the CEOP Enhanced Internet Explorer 8

  - by Asian Angel

  Do you want to make Internet Explorer safer and more helpful for you and family? Then join us as we look at the CEOP (Child Exploitation and Online Protection Centre) enhanced version of Internet Explorer 8. Setting CEOP Up We chose to install the whole CEOP pack in order to have access to complete set of CEOP Tools. The install process will be comprised of two parts…it will begin with CEOP branded windows showing the components being installed… Note: The components can be downloaded separately for those who only want certain CEOP components added to their browser. Then it will move to the traditional Microsoft Internet Explorer 8 install windows. One thing that we did notice is that here you will be told that you will need to restart your computer but in other windows a log off/log on process is mentioned. Just to make certain that everything goes smoothly we recommend restarting your computer when the installation process is complete. In the EULA section you can see the versions of Windows that the CEOP Pack works with. Once you get past the traditional Microsoft install windows you will be dropped back into the CEOP branded windows. CEOP in Action After you have restarted your computer and opened Internet Explorer you will notice that your homepage has been changed. When it comes to your children that is not a bad thing in this instance. It will also give you an opportunity to look through the CEOP online resources. For the moment you may be wondering where everything is but do not worry. First you can find the two new search providers in the drop-down menu for your “Search Bar” and select a new default if desired. The second thing to look for are the new links that have been added to your “Favorites Menu”. These links can definitely be helpful for you and your family. The third part will require your “Favorites Bar” to be visible in order to see the “Click CEOP Button”. If you have not previously done so you will need to turn on subscribing for “Web Slices”. Click on “Yes” to finish the subscription process. Clicking on the “CEOP Button” again will show all kinds of new links to help provide information for you and your children. Notice that the top part is broken down into “topic categories” while the bottom part is set up for “age brackets”…very nice for helping you focus on the information that you want and/or need. Looking for information and help on a particular topic? Clicking on the “Cyberbullying Link” for example will open the following webpage with information about cyberbullying and a link to get help with the problem. Need something that is focused on your child’s age group? Clicking on the “8-10? Link” as an example opened this page. Want information that is focused on you? The “Parent? Link” leads to this page. The “topic categories & age brackets” make the CEOP Button a very helpful and “family friendly” addition to Internet Explorer. Perhaps you (or your child) want to conduct a search for something that is affecting your child. As you type in a “search term” both of the search providers will provide helpful suggestions for dealing with the problem. We felt that these were very nice suggestions in both instances here… Conclusion We have been able to give you a good peek at what the CEOP Tools can do but the best way to see how helpful it can be for you and your family is try it for yourself. Your children’s safety and happiness is worth it. Links Download the Internet Explorer CEOP Pack (link at bottom of webpage) Note: If you are interested in a singular component or only some use these links. Download the Click CEOP Button Download Search CEOP Download Internet Safety and Security Search Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPWhen to Use Protect Tab vs Lock Tab in FirefoxMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarQuick Hits: 11 Firefox Tab How-Tos TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

  Read the article

• Review of Samsung Focus Windows Phone 7

  - by mbcrump

  I recently acquired a Samsung Focus Windows Phone 7 device from AT&T and wanted to share what I thought of it as an end-user. Before I get started, here are several of my write-ups for the Windows Phone 7. You may want to check out the second article titled: Hands-on WP7 Review of Prototype Hardware. From start to finish with the final version of Visual Studio Tools for Windows Phone 7 Hands-on : Windows Phone 7 Review on Prototype Hardware. Deploying your Windows Phone 7 Application to the actual hardware. Profile your Windows Phone 7 Application for Free Submitting a Windows Phone 7 Application to the Market. Samsung Focus i917 Phone Size: Perfect! I have been carrying around a Dell Streak (Android) and it is about half the size. It is really nice to have a phone that fits in your pocket without a lot of extra bulk. I bought a case for the Focus and it is still a perfect size.  The phone just feels right. Screen: It has a beautiful Super AMOLED 480x800 screen. I only wish it supported a higher resolution. The colors are beautiful especially in an Xbox Live Game.   3G: I use AT&T and I've had spotty reception. This really can't be blamed on the phone as much as the actual carrier. Battery: I've had excellent battery life compared to my iPhone and Android devices. I usually use my phone throughout the day on and off and still have a charge at the end of the day.  Camera/Video: I'm still looking for the option to send the video to YouTube or the Image to Twitter. The images look good, but the phone needs a forward facing camera. I like the iPhone/Android (Dell Streak) camera better. Built-in Speaker: Sounds great. It’s not a wimpy speaker that you cannot hear.  CPU: Very smooth transitioning from one screen to another. The prototype Windows Phone 7 that I had, was no where near as smooth. (It was also running a slower processor though). OS: I actually like the OS but a few things could be better. CONS: Copy and Paste (Supposed to come in the next update) We need more apps (Pandora missing was a big one for me and Slacker’s advertisement sucks!). As time passes, and more developers get on board then this will be fixed. The browser needs some major work. I have tried to make cross-platform (WP7, Android, iPhone and iPad) web apps and the browser that ships with WP7 just can’t handle it.  Apps need to be organized better. Instead of throw them all on one screen, it would help to allow the user to create categories. PROS: Hands down the best gaming experience on a phone. I have all three major phones (iphone, android and wp7). Nothing compares to the gaming experience on the WP7. The phone just works. I’ve had a LOT of glitches with my Android device. I’ve had maybe 2 with my WP7 device. Exchange and Office support are great. Nice integration with Twitter/Facebook and social media. Easy to navigate and find the information you need on one screen. Let’s look at a few pictures and we will wrap up with my final thoughts on the phone. WP7 Home Screen. Back of the phone is as stylish. It is hard to see due to the shadow but it is a very thin phone. What’s included? Manuals Ear buds Data Cable plus Power Adapter Phone Click a picture to enlarge So, what are my final thoughts on the Phone/OS? I love the Samsung Focus and would recommend it to anyone looking for a WP7 device. Like any first generation product, you need to give it a little while to mature. Right now the phone is missing several features that we are all used to using. That doesn’t mean a year from now it will be in the same situation. (I sure hope we won’t). If you are looking to get into mobile development, I believe WP7 is the easiest platform to develop from. This is especially true if you have a background in Silverlight or WPF.    Subscribe to my feed

  Read the article

• On Life and TechEd&hellip;

  - by MOSSLover

  I haven’t been writing here I know.  I am very sorry, but I am just too busy trying to make my personal life just as good as my SharePoint life.  So I was at TechEd again helping with the hands on labs, but I had a very long couple of weeks.  I will have a long week again.  I started out going to my friend, Randy Walker’s, wedding and I ended up at my grandmother’s condo in Fort Lauderdale.  It was a very trying week.  I had to drive 5 1/2 hours to the wedding from St. Louis and back.  So Randy is an awesome person.  He is a great guy and he was the first person ever to nominate me for MVP.  I knew it probably wasn’t going anywhere, but it was the thought that count.  I met Randy in 2008 at Tulsa Techfest.  We had fun jamming out to Rockband.  I knew he was good people back then.  He has let me vent and I have let him vent over countless personal problems.  He has always been a great friend.  So it was a no brainer when I decided to go to his wedding no matter how much driving or stress or lack of sleep it was worth it.  I am incredibly happy for him to finally find a diamond amongst a lot of coal.  To take part in his celebration was so awesome.  I thank him again for letting me participate in this ceremony. Now after Randy’s wedding I drove 5 1/2 hours landed in St. Louis, fed a cat an asthma pill hidden in wet cat food, and slept for 4 hours.  I immediately saw my best friend who dropped me off at the airport and proceeded to TechEd.  I slept 1 hour on each flight, then ended up working a 3 hour shift at TechEd.  The rest of the week was a haze of connecting with people and sleeping very little.  I got to see my friend Tasha and her husband Casey plus a billion other people.  It was a great week and then I got a call from my grandmother.  It turns out her husband was admitted to the hospital. My grandparents on my dad's side have been divorced since the 60s, which means I never got to see them together.  I always felt like they never cliqued.  When I was a kid we would always spend half our time in Chicago at grandma’s and half our time at grandpa’s houses.  We would hang out with my grandpa’s wife Bobbi and my grandma’s husband Leo.  My cousin’s always called Leo by Pappa and my brother and I would use Leo.  My cousins lived in Chicago up until my cousin Gavi was born then they moved to Philadelphia.  I remember complaining to my dad that we never visited anywhere cool just Chicago and Kansas City.  I also remember Leo teaching me and my brother, Sam, how to climb a tree and play tennis on the back of the apartment wall.  My grandfather’s was kind of stuffy and boring, but we always enjoyed my grandmother’s.  She had games and Disney Movies and toys.  Leo always made it a ton of fun to visit.  I’m not sure a lot of people knew this fact, but when I was 16 years old I saw my grandfather on my mother’s side slowly die of congestive heart failure in a nursing home.  When I was 18 I saw my grandmother on my mother’s side slowly die of an infection over a 30 day period.  I hate hospitals and I hate nursing homes, but sometimes you have to suck in your gut and be strong.  I tried to do that this weekend and I hope I did an ok job.  I really hope things get better, but if they don’t I really appreciate everything he has given me in life.  I am a terrible tennis player and I haven’t climbed a tree in ages, but they both encouraged me when encouragement from my parents was lacking.  It was Father’s Day today and I have to at least pay tribute to Leo Morris, because he has been a good person to me all my life.  Technorati Tags: TechEd,Grandparents,Father's Day

  Read the article

• Clean Up the New Ubuntu Grub2 Boot Menu

  - by Trevor Bekolay

  Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• CQRS &ndash; Questions and Concerns

  - by Dylan Smith

  I’ve been doing a lot of learning on CQRS and Event Sourcing over the last little while and I have a number of questions that I haven’t been able to answer. 1. What is the benefit of CQRS when compared to a typical DDD architecture that uses Event Sourcing and properly captures intent and behavior via verb-based commands? (other than Scalability) 2. When using CQRS what do you do with complex query-based logic? I’m going to elaborate on #1 in this blog post and I’ll do a follow-up post on #2. I watched through Greg Young’s video on the business benefits of CQRS + Event Sourcing and first let me say that I thought it was an excellent presentation that really drives home a lot of the benefits to this approach to architecture (I watched it twice in a row I enjoyed it so much!). But it didn’t answer some of my questions fully (I wish I had been there to ask these of Greg in person!). So let me pick apart some of the points he makes and how they relate to my first question above. I’m completely sold on the idea of event sourcing and have a clear understanding of the benefits that it brings to the table, so I’m not going to question that. But you can use event sourcing without going to a CQRS architecture, so my main question is around the benefits of CQRS + Event Sourcing vs Event Sourcing + Typical DDD architecture Architecture with Event Sourcing + Commands on Left, CQRS on Right Greg talks about how the stereotypical architecture doesn’t support DDD, but is that only because his diagram shows DTO’s coming up from the client. If we use the same diagram but allow the client to send commands doesn’t that remove a lot of the arguments that Greg makes against the stereotypical architecture? We can now introduce verbs into the system. We can capture intent now (storing it still requires event sourcing, but you can implement event sourcing without doing CQRS) We can create a rich domain model (as opposed to an anemic domain model) Scalability is obviously a benefit that CQRS brings to the table, but like Greg says, very few of the systems we create truly need significant scalability Greg talks about the ability to scale your development efforts. He says CQRS allows you to split the system into 3 parts (Client, Domain/Commands, Reads) and assign 3 teams of developers to work on them in parallel; letting you scale your development efforts by 3x with nearly linear gains. But in the stereotypical architecture don’t you already have 2 separate modules that you can split your dev efforts between: The client that sends commands/queries and receives DTO’s, and the Domain which accepts commands/queries, and generates events/DTO’s. If this is true it’s not really a 3x scaling you achieve with CQRS but merely a 1.5x scaling which while great doesn’t sound nearly as dramatic (“I can do it with 10 devs in 12 months – let me hire 5 more and we can have it done in 8 months”). Making the Query side “stupid simple” such that you can assign junior developers (or even outsource it) sounds like a valid benefit, but I have some concerns over what you do with complex query-based logic/behavior. I’m going to go into more detail on this in a follow-up blog post shortly. He also seemed to focus on how “stupid-simple” it is doing queries against the de-normalized data store, but I imagine there is still significant complexity in the event handlers that interpret the events and apply them to the de-normalized tables. It sounds like Greg suggests that because we’re doing CQRS that allows us to apply Event Sourcing when we otherwise wouldn’t be able to (~33:30 in the video). I don’t believe this is true. I don’t see why you wouldn’t be able to apply Event Sourcing without separating out the Commands and Queries. The queries would just operate against the domain model instead of the database. But you’d still get the benefits of Event Sourcing. Without CQRS the queries would only be able to operate against the current state rather than the event history, but even in CQRS the domain behaviors can only operate against the current state and I don’t see that being a big limiting factor. If some query needs to operate against something that is not captured by the current state you would just have to update the domain model to capture that information (no different than if that statement were made about a Command under CQRS). Some of the benefits I do see being applicable are that your domain model might end up being simpler/smaller since it only needs to represent the state needed to process commands and not worry about the reads (like the Deactivate Inventory Item and associated comment example that Greg provides). And also commands that can be handled in a Transaction Script style manner by the command handler simply generating events and not touching the domain model. It also makes it easier for your senior developers to focus on the command behavior and ignore the queries, which is usually going to be a better use of their time. And of course scalability. If anybody out there has any thoughts on this and can help educate me further, please either leave a comment or feel free to get in touch with me via email:

  Read the article

• On Contract Employment

  - by kerry

  I am going to post about something I don’t post about a lot, the business side of development.  Scott at the antipimp does a good job of explaining how contracts work from a business perspective.  I am going to give a view from the ground. First, a little background on myself.  I have recently taken a 6 month contract after about 8 years of fulltime employment.  I have 2 kids, and a stay at home wife.  I took this contract opportunity because I wanted to try it on for size.  I have always wondered whether I would like doing contracts over fulltime employment.  So, in keeping with the theme of this blog I will write this down now so that I may reference it later. ALL jobs are temporary! Right now you may not realize it, most people simply ignore it, but EVERY job is temporary.  Everyone should be planning for life after the money stops coming in.  Sadly, most people do not.  Contracting pushes this issue to the forefront, making you deal with it.  After a month on a contract, I am happy to say that I am saving more than I ever saved in a fulltime position.  Hopefully, I will be ready in case of an extended window of unemployment between contracts. Networking I find it extremely gratifying getting to know people.  It is especially beneficial when moving to a new city.  What better way to go out and meet people in your field than to work a few contracts?  6 months of working beside someone and you get to know them pretty well.  This is one of my favorite aspects. Technical Agility Moving between IS shops takes (or molds you into) a flexible person.  You have to be able to go in and hit the ground running.  This means you need to be able to sit down and start work on a large codebase working in a language that you may or may not have that much experience in.  It is also an excellent way to learn new languages and broaden your technical skill set.  I took my current position to learn Ruby.  A month ago, I had only used it in passing, but now I am using it every day.  It’s a tragedy in this field when people start coding for the joy and love of coding, then become deeply entrenched in their companies methods and technologies that it becomes a just a job. Less Stress I am not talking about the kind of stress you get from a jackass boss.  I am talking about the kind of stress I (or others) experience about planning and future proofing your code.  Not saying I stay up at night worrying whether we have done it right, if that code I wrote today is going to bite me later, but it still creeps around in the dark recesses of my mind.  Careful though, I am not suggesting you write sloppy code; just defer any large architectural or design decisions to the ‘code owners’. Flexible Scheduling It makes me very happy to be able to cut out a few hours early on a Friday (provided the work is done) and start the weekend off early by going to the pool, or taking the kids to the park.  Contracting provides you this opportunity (mileage may vary).  Most of your fulltime brethren will not care, they will be jealous that they’re corporate policy prevents them from doing the same.  However, you must be mindful of situations where this is not appropriate, and don’t over do it.  You are there to work after all. Affirmation of Need Have you ever been stuck in a job where you thought you were underpaid?  Have you ever been in a position where you felt like there was not enough workload for you?  This is not a problem for contractors.  When you start a contract it is understood that you are needed, and the employer knows that you are happy with the terms. Contracting may not be for everyone.  But, if you develop a relationship with a good consulting firm, keep their clients happy, then they will keep you happy.  They want you to work almost as much as you do.  Just be sure and plan financially for any windows of unemployment.

  Read the article

< Previous Page | 519 520 521 522 523 524 525 526 527 528 529 530  | Next Page >