Search Results

Search found 18321 results on 733 pages for 'excel library'.

Page 525/733 | < Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >

  • Does (should?) changing the URI scheme name change the semantics?

    - by Doug
    If we take: http://example.com/foo is it fair to say that: ftp://example.com/foo .. points to the same resource, just using a different mechanism for resolving it (and of course possibly a different representation, but perhaps not)? This came to light in a discussion we were having surrounding some internal tooling with Git. We have to process some Git repositories, and they come to use as "git@{authority}/{path}" , however the library we're using to interface with them doesn't support the git protocol. I suggested that we should make the service robust in of that it tries to use HTTP or SSH, in essence, discovering what protocols/schemes are supported for resolving the repository at {path} under each {authority}. This was met with some criticism: "We don't know if that's the same repository". My response was: "It had better be!" Looking at RFC 3986, I see this excerpt: URI "resolution" is the process of determining an access mechanism and the appropriate parameters necessary to dereference a URI; this resolution may require several iterations. To use that access mechanism to perform an action on the URI's resource is to "dereference" the URI. Which makes me think that the resolution process is permitted to try different protocols, because: Although many URI schemes are named after protocols, this does not imply that use of these URIs will result in access to the resource via the named protocol. The only concern I have, I guess, is that I only see reference to the notion of changing protocols when it comes to traversing relationships: it is possible for a single set of hypertext documents to be simultaneously accessible and traversable via each of the "file", "http", and "ftp" schemes if the documents refer to each other with relative references. I'm inclined to think I'm wrong in my initial beliefs, because the Normalization and Comparison section of said RFC doesn't mention any way of treating two URIs as equivalent if they use different schemes. It seems like schemes named/based on IP protocols ought to have this notion, at least?

    Read the article

  • Tune Up (for Music)

    - by Eli
    I use iTunes and have attempted to organize my music folder. I have dozens of duplicates, from various computer backups and imports, and want to cut the fat as far as my duplicates of duplicates. I've also got many songs in my library that simply don't exist, or are linked to nothing. Some are mistitled/labeled as well. It's pretty much a mess. I seem to remember a program called "Tune Up" that did this "automagically", but I don't know of its recent reception or actual effectiveness. Would it be a wise investment to get Tune Up?

    Read the article

  • Windows 7 Desktop slideshow

    - by blackmastiff
    I have my windows 7 (Home Professional if it matters) set to automatically change the background every 20 minutes with the source of the slideshow as a folder in the Pictures library. Recently, the slideshow has not been functioning. The pictures do not change while the computer is on; they only seem to change when it is shut down (i.e. there is a different desktop on each boot), or about 50% of the time when waking the computer from hibernation. I've changed the time settings, the folder location on the drive, and made sure to disable all programs that tweak the desktop with no luck. Any thoughts?

    Read the article

  • Is there a way to send personal documents on Kindle for Mac app?

    - by Sid
    I have the Kindle App on my Mac, and an android phone. When I email documents to my [email protected] id, I am able to see it in my library, and subsequently send it to my Android device. However, I'm not able to send it to the Kindle App for my Mac. The Kindle for Mac FAQs clearly state that Magazines, personal documents, etc. are not supported. However, I came across here that there is a workaround to this, although I've not been able to figure out what it is.

    Read the article

  • Parallelize code using CUDA [migrated]

    - by user878944
    If I have a code which takes struct variable as input and manipulate it's elements, how can I parallelize this using CUDA? void BackpropagateLayer(NET* Net, LAYER* Upper, LAYER* Lower) { INT i,j; REAL Out, Err; for (i=1; i<=Lower->Units; i++) { Out = Lower->Output[i]; Err = 0; for (j=1; j<=Upper->Units; j++) { Err += Upper->Weight[j][i] * Upper->Error[j]; } Lower->Error[i] = Net->Gain * Out * (1-Out) * Err; } } Where NET and LAYER are structs defined as: typedef struct { /* A LAYER OF A NET: */ INT Units; /* - number of units in this layer */ REAL* Output; /* - output of ith unit */ REAL* Error; /* - error term of ith unit */ REAL** Weight; /* - connection weights to ith unit */ REAL** WeightSave; /* - saved weights for stopped training */ REAL** dWeight; /* - last weight deltas for momentum */ } LAYER; typedef struct { /* A NET: */ LAYER** Layer; /* - layers of this net */ LAYER* InputLayer; /* - input layer */ LAYER* OutputLayer; /* - output layer */ REAL Alpha; /* - momentum factor */ REAL Eta; /* - learning rate */ REAL Gain; /* - gain of sigmoid function */ REAL Error; /* - total net error */ } NET; What I could think of is to first convert the 2d Weight into 1d. And then send it to kernel to take the product or just use the CUBLAS library. Any suggestions?

    Read the article

  • D20 java engine

    - by javydreamercsw
    I'm trying to incorporate PCGen into my application to avoid recreating the wheel for D20 system. (Are there any other libraries out there?) In other words I would like to use PCGen as a library and do things like: CRUD characters (and all related information) Experience/level managements I don't need the GUI part of it just the information to pass to my application. This is a scenario I can think of: 1. Load available custom classes 2. Create a new Character/NPC 3. Transfer the stats to my system 4. Player keeps playing so I need to update experience 5. Save player in my system and recreate it later. I'm trying to start to create a character from PCClass with no luck. Looking at the code it seems it'll try to load it. I assume load from a file generated from the GUI. Is there a way of bypassing the GUI for all this? I was looking for a tutorial of some sorts without luck. I was able to figure out how to use the dice within PCGen but that's about it. Any ideas?

    Read the article

  • Slick UnicodeFont displays in different location depending on the screen size?

    - by Joehot2000
    I am using the Slick2D library to draw text. The text draws perfectly, however it is in the wrong location! I could easily draw it in the correct location, however the problem is that the "correct location" is very different depending on the size of the screen - And my game needs to be able to have the screen size changed. Here is the render method for the text: public static void render() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glUseProgram(0); glBindBuffer(GL_ARRAY_BUFFER, 0); glMatrixMode(GL_PROJECTION); glLoadMatrix(orthographicProjectionMatrix); glMatrixMode(GL_MODELVIEW); glPushMatrix(); glLoadIdentity(); glDisable(GL_LIGHTING); font.drawString(0, 0, "OMG ITS TEXT!", Color.green); glEnable(GL_LIGHTING); glPopMatrix(); glMatrixMode(GL_PROJECTION); glLoadMatrix(perspectiveProjectionMatrix); glMatrixMode(GL_MODELVIEW); } So, how can I set the text to be in the middle of the screen irrespective of screen size? Thanks!

    Read the article

  • c++ accumulate with move instead of copy [migrated]

    - by user74399
    I have the following code auto adder = [](string& s1, const string& s2)->string&& { if (!s1.empty()) s1 += " "; s1 += s2; return move(s1); }; string test; test.reserve(wordArray.size() * 10); string words = accumulate(wordArray.begin(), wordArray.end(), move(test), adder); What I would like here is to avoid string copying. Unfortunately this is not accomplished by the vs2012 implementation of accumulate. Internally accumulate calls another function _Accumulate and the rvalue functionality gets lost in the process. It I instead call the _Accumulate function like so string words = Accumulate(wordArray.begin(), wordArray.end(), move(test), adder); I get the intended performance gain. Must the std library be rewritten to take rvalue arguments into consideration? Is there some other way I may use accumulate to accomplish what I want without cheating to much?

    Read the article

  • ????????????????

    - by Yusuke.Yamamoto
    ????????? ????????? ????????? ????·???? ?????:Oracle???????·??????(????)??:?????????????? Pickup!:IT???????????!|????????:100???????!|???????????? ????????:?Oracle DB?????????????????????Windows?VMware?? ?????:Oracle OpenWorld Tokyo 2012|JavaOne Tokyo 2012|??????:151 ?OTN ???? ?????? ????????:???????100???????! ?????????????????Amazon????Get! ???? Oracle Technology Network, ????/????, ??IT???????·?????????????? ???????/???MySQL?????? ?????? ???????/???MySQL????? ?????????Oracle VM VirtualBox????Oracle Real Application Clusters (RAC) 11g Release 2????? ???????/??????????????????????????????? ???????/?????????????/????·????????Flashback Database with SSD? ????? ????? Oracle?????????????????????????!???????????? Oracle Enterprise Manager 12c(EM12c):????????? ~????????~ ???????????!??????·??????? Oracle Linux 5.8?????????? ???DB?????Oracle SQL Developer 3.1???????????? Oracle??????(OUI:Oracle Universal Installer)???? ????? ???? ????????? ????????????·???????? ????????????? ???????? 11gR2 ?????????? Oracle Database 11g R2 Oracle WebLogic Server 11g R1 Oracle Enterprise Manager 11g R1 ????? ????????? Oracle Database ????????????????·?? ???????/???????????????? ?????????(????????, ???, etc) ????????(???, ?????, REDO, ???·????, etc) ????·?????????????????(?????, ???, ??, ??, ??? etc) ????·?????????(??, etc) ????????????? ???????????????????·?????? ??????? ???? ????????·??|SQL Server Windows Server ??????????PL/SQL|Java|.NET|PHP ??/??? ORACLE MASTER ???? DWH(?????????)??·?? ????? ?????(SAN, NAS, SSD, etc) Oracle Database ??????? Amazon EC2 Microsoft Excel Microsoft Visual Studio MSFC/MSCS(Microsoft Cluster Service) SAP ??·??????? Oracle Database Oracle Database 11g Release 2(11gR2) Oracle Database Standard Edition ????????: Advanced Compression ?????????: Advanced Security Application Express(APEX) Automatic Storage Management(ASM) SSD???Oracle???: Database Smart Flash Cache ??????????: Data Guard/Active Data Guard Data Pump Oracle Data Provider for .NET(ODP.NET) ????: Oracle Text Partitioning(???????/?????????) DB????: Real Application Clusters(RAC) Real Application Testing Recovery Manager(RMAN) SQL*Loader|SQL*Plus|Statspack ??????|????????|???????? Database Appliance Database Firewall Exadata Database Machine SQL Developer ?????DB: TimesTen In-Memory Database Oracle Fusion Middleware Java Oracle Coherence Oracle Data Integrator(ODI) Oracle GoldenGate Oracle JRockit JVM Oracle WebLogic Server Oracle Enterprise Manager for Database|for Middleware ????????????: Oracle Application Testing Suite Oracle Linux Oracle Solaris DTrace|ZFS|???/???? Oracle VM Server for x86 ?????? ???????? ?????????Oracle???????????????·????????????????? ?????????(??·??????) OTN??????(??????) ???????(????????) Oracle University(??) ??????! ?????... ????? ?????? ????? ?????? ?????|?Sun?? ???????? OTN???????? OTN(????) ?????? ???? OTN???|???? OTN?????? ??????? ?????? ???????? ???? ???????

    Read the article

  • ????????????3?????

    - by Feng
    ?? ??blog?????oracle????????????,??????????????,??????: ?????????. ???????: ??????????,????????; ????????????,?” ???”??. 1. OS swapping/paging ??????concurrency??????? Oracle?????????, ??latch/mutex???????”?”,??????????????/???(????????????,??????????????????). ????OS??????swapping/paging????,???????????,??latch/mutex???????,????????????hung/slow???. ??swapping/paging??????: a). ???? b). ??????; ?????, ?????????????? c). ?????/????? ????????????????? ???????: Lock SGA, ??SGA(???latch/mutex)???pin???????swapping???. ???SGA??????,????large page(hugepage)??,??latch/mutex??/?????. 2. SGA resizing?????????? ?AMM/ASMM??????????, shared pool?buffer cache?????component????????????,??ora-4031???.??????????,???????resize????????????(?latch/mutex?????)?????, ?????????latch/mutex??. ????shared pool?resize??????,??latch/mutex???????. ?????????:  ?????bug; ???????????,??resize???????????????,???????????. ??bug?fix??????????impact, ???????????. ???????: 1). ??buffer cache?shared pool??(???????????,?????????) 2). ??resize???????16?? alter system set "_memory_broker_stat_interval"=999; Disable AMM/ASMM?????????,?????: ??ora-4031????????????. 3. DDL?????????? ??????????????????. ???????????DDL (??grant, ?????, ????????),???????????SQL?????invalidate?;????????SQL????????????,?????????hard parse ? SQL??????. ??????? “hardparse storm”, latch/mutex????????, ??library cache lock/row cache lock????; ??????????slow/hung. ???????: ???????????DDL ??????????,???????????,?? “????????????3?????"?

    Read the article

  • Clearing C#'s WebBrowser control's cookies for all sites WITHOUT clearing for IE itself

    - by Helgi Hrafn Gunnarsson
    Hail StackOverflow! The short version of what I'm trying to do is in the title. Here's the long version. I have a bit of a complex problem which I'm sure I will receive a lot of guesses as a response to. In order to keep the well-intended but unfortunately useless guesses to a minimum, let me first mention that the solution to this problem is not simple, so simple suggestions will unfortunately not help at all, even though I appreciate the effort. C#'s WebBrowser component is fundamentally IE itself so solutions with any sorts of caveats will almost certainly not work. I need to do exactly what I'm trying to do, and even a seemingly minor caveat will defeat the purpose completely. At the risk of sounding arrogant, I need assistance from someone who really has in-depth knowledge about C#'s WebBrowser and/or WinInet and/or how to communicate with Windows's underlying system from C#... or how to encapsulate C++ code in C#. That said, I don't expect anyone to do this for me, and I've found some promising hints which are explained later in this question. But first... what I'm trying to achieve is this. I have a Windows.Forms component which contains a WebBrowser control. This control needs to: Clear ALL cookies for ALL websites. Visit several websites, one after another, and record cookies and handle them correctly. This part works fine already so I don't have any problems with this. Rinse and repeat... theoretically forever. Now, here's the real problem. I need to clear all those cookies (for any and all sites), but only for the WebBrowser control itself and NOT the cookies which IE proper uses. What's fundamentally wrong with this approach is of course the fact that C#'s WebBrowser control is IE. But I'm a stubborn young man and I insist on it being possible, or else! ;) Here's where I'm stuck at the moment. It is quite simply impossible to clear all cookies for the WebBrowser control programmatically through C# alone. One must use DllImport and all the crazy stuff that comes with it. This chunk works fine for that purpose: [DllImport("wininet.dll", SetLastError = true)] private static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength); And then, in the function that actually does the clearing of the cookies: InternetSetOption(IntPtr.Zero, INTERNET_OPTION_END_BROWSER_SESSION, IntPtr.Zero, 0); Then all the cookies get cleared and as such, I'm happy. The program works exactly as intended, aside from the fact that it also clears IE's cookies, which must not be allowed to happen. The problem is that this also clears the cookies for IE proper, and I can't have that happen. From one fellow StackOverflower (if that's a word), Sheng Jiang proposed this to a different problem in a comment, but didn't elaborate further: "If you want to isolate your application's cookies you need to override the Cache directory registry setting via IDocHostUIHandler2::GetOverrideKeyPath" I've looked around the internet for IDocHostUIHandler2 and GetOverrideKeyPath, but I've got no idea of how to use them from C# to isolate cookies to my WebBrowser control. My experience with the Windows registry is limited to RegEdit (so I understand that it's a tree structure with different data types but that's about it... I have no in-depth knowledge of the registry's relationship with IE, for example). Here's what I dug up on MSDN: IDocHostUIHandler2 docs: http://msdn.microsoft.com/en-us/library/aa753275%28VS.85%29.aspx GetOverrideKeyPath docs: http://msdn.microsoft.com/en-us/library/aa753274%28VS.85%29.aspx I think I know roughly what these things do, I just don't know how to use them. So, I guess that's it! Any help is greatly appreciated.

    Read the article

  • C# SOCKS proxy service for HTTP requests

    - by Ed
    I'm trying to build a service that will forward HTTP requests from agents like a browser to the Tor service. Problem is, the Tor service only accepts SOCKS4a connections. So my solution is to listen for HTTP requests, get the URL they're requesting, and make a request via Tor with the help of the Starksoft.Net.Proxy library. Then return the response. The library kind of works, but I'm not happy. It returns HTTP headers with the response and it can't handle images. So the responses are messed up. How could I improve my code? I'm very new to network programming. Sorry for the long example. public AnonymiserService(ILogger logger) { try { _logger = logger; _logger.Log("Listening on port {0}...", Properties.Settings.Default.ListeningPort); StartListener(new string[] { string.Format("http://*:{0}/", Properties.Settings.Default.ListeningPort) }); } catch (Exception ex) { _logger.LogError("Exception!", ex); } } private void StartListener(string[] prefixes) { if (!HttpListener.IsSupported) { _logger.LogError("HttpListener isn't supported on this machine!"); return; } HttpListener listener = new HttpListener(); foreach (string s in prefixes) listener.Prefixes.Add(s); while (true) { listener.Start(); IAsyncResult result = listener.BeginGetContext(new AsyncCallback(ListenerCallback), listener); result.AsyncWaitHandle.WaitOne(); } } private void ListenerCallback(IAsyncResult result) { try { // Get HTTP request HttpListener listener = (HttpListener)result.AsyncState; HttpListenerContext context = listener.EndGetContext(result); _logger.Log("Retrieving [{0}]", context.Request.RawUrl); // Create connection // Use Tor as proxy IProxyClient proxyClient = new Socks4aProxyClient("localhost", 9050); TcpClient tcpClient = proxyClient.CreateConnection(context.Request.UserHostName, 80); // Create message // Need to set Connection: close to close the connection as soon as it's done byte[] data = Encoding.UTF8.GetBytes(String.Format("GET {0} HTTP/1.1\r\nHost: {1}\r\nConnection: close\r\n\r\n", context.Request.Url.PathAndQuery, context.Request.UserHostName)); // Send message NetworkStream ns = tcpClient.GetStream(); ns.Write(data, 0, data.Length); // Pass on HTTP response HttpListenerResponse responseOut = context.Response; if (ns.CanRead) { byte[] buffer = new byte[32768]; int read = 0; string responseString = string.Empty; // Read response while ((read = ns.Read(buffer, 0, buffer.Length)) > 0) { responseString += Encoding.UTF8.GetString(buffer, 0, read); } // Remove headers if (responseString.IndexOf("HTTP/1.1 200 OK") > -1) responseString = responseString.Substring(responseString.IndexOf("\r\n\r\n")); // Forward response byte[] byteArray = Encoding.UTF8.GetBytes(responseString); responseOut.OutputStream.Write(byteArray, 0, byteArray.Length); } // Close streams responseOut.OutputStream.Close(); ns.Close(); // Close connection tcpClient.Close(); _logger.Log("Retrieved [{0}]", context.Request.RawUrl); } catch (Exception ex) { _logger.LogError("Exception in ListenerCallback!", ex); } }

    Read the article

  • How to configure multiple WCF binding configurations for the same scheme

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • Exception converting Office files to PDF using ABCpdf.NET onWindows Server 2008

    - by drivendevelopment
    Has anyone delt with this exception from ABCpdf? We're running on Server 2008 and only have issues converting Office files (Word and Excel). This all worked well on Server 2003. Because we're only having issues with Office files I wonder if it's related to the XPS support on Server 2008? The code that calls into this function is running as a Windows Service. Private Overloads Function ConvertMicrosoftOfficeDocToPdf(ByVal inputFile As Byte(), ByVal fileExt As String) As Byte() Dim abcDoc As WebSupergoo.ABCpdf7.Doc = Nothing Try abcDoc = New WebSupergoo.ABCpdf7.Doc() Dim xro As New WebSupergoo.ABCpdf7.XReadOptions() xro.FileExtension = fileExt Try abcDoc.Read(inputFile, xro) Catch ex As Exception System.Diagnostics.Trace.Write(ex.ToString()) Throw ex End Try Dim fileBytes As Byte() = abcDoc.GetData() Return fileBytes Finally If Not abcDoc Is Nothing Then abcDoc.Clear() abcDoc.Dispose() End If End Try End Function WebSupergoo.ABCpdf7.Internal.PDFException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. --- System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at WebSupergoo.ABCpdf7.Internal.NDoc._InvokeMethod(IntPtr inDoc, Int32 inMethod, Int32 inIndex, Int32 inFlags, String inParams, String& outErr) at WebSupergoo.ABCpdf7.Internal.NDoc.InvokeMethod(IntPtr inDoc, Int32 inMethod, Int32 inIndex, Int32 inFlags, String inParams, String& outErr) at WebSupergoo.ABCpdf7.Doc.PrintToXps(String inputFile, String outputFile, Int32 timeout, String printerName) at WebSupergoo.ABCpdf7.Operations.XpsImportOperation.ImportAny(Doc doc, String path, Int32 timeout) at WebSupergoo.ABCpdf7.XReadOptions.ImportXpsAny(Doc doc, String path, Boolean clear) at WebSupergoo.ABCpdf7.XReadOptions.Read(Doc doc, Byte[] data, ReadModuleType module) at WebSupergoo.ABCpdf7.XReadOptions.Read(Doc doc, Byte[] data)

    Read the article

  • WPF Toolkit DataGridCell Style DataTrigger

    - by KrisTrip
    I am trying to change the color of a cell to Yellow if the value has been updated in the DataGrid. My XAML: <toolkit:DataGrid x:Name="TheGrid" ItemsSource="{Binding}" IsReadOnly="False" CanUserAddRows="False" CanUserResizeRows="False" AutoGenerateColumns="False" CanUserSortColumns="False" SelectionUnit="CellOrRowHeader" EnableColumnVirtualization="True" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto"> <toolkit:DataGrid.CellStyle> <Style TargetType="{x:Type toolkit:DataGridCell}"> <Style.Triggers> <DataTrigger Binding="{Binding IsDirty}" Value="True"> <Setter Property="Background" Value="Yellow"/> </DataTrigger> </Style.Triggers> </Style> </toolkit:DataGrid.CellStyle> </toolkit:DataGrid> The grid is bound to a List of arrays (displaying a table of values kind of like excel would). Each value in the array is a custom object that contains an IsDirty dependency property. The IsDirty property gets set when the value is changed. When i run this: change a value in column 1 = whole row goes yellow change a value in any other column = nothing happens I want only the changed cell to go yellow no matter what column its in. Do you see anything wrong with my XAML?

    Read the article

  • Configuring multiple WCF binding configurations for the same scheme doesn't work

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" bindingConfiguration="public" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" bindingConfiguration="public" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • Module configuration and layout configuration in zend framework.

    - by Prasanth P
    Hi all, I got some codes from other articles for configuring module and layout in zend framework. I tried with in my local. i didn't get different layout for default and admin module. Here is my code for configuring module and layout for zend framework. configs/application.ini [production] # Debug output phpSettings.display_startup_errors = 0 phpSettings.display_errors = 0 # Include path includePaths.library = APPLICATION_PATH "/../library" # Bootstrap bootstrap.path = APPLICATION_PATH "/Bootstrap.php" bootstrap.class = "Bootstrap" admin.bootstrap.path = APPLICATION_PATH "/modules/admin/Bootstrap.php" admin.bootstrap.class = "admin_Bootstrap" # Front Controller resources.frontController.controllerDirectory = APPLICATION_PATH "/controllers" resources.frontController.env = APPLICATION_ENV # Session resources.session.name = "ZendSession" resources.session.save_path = APPLICATION_PATH "/../data/session" resources.session.remember_me_seconds = 86400 # Layout resources.layout.layout = "layout" resources.layout.layoutPath = APPLICATION_PATH "/layouts" admin.resources.layout.layout = "admin" admin.resources.layout.layoutPath = APPLICATION_PATH "/modules/admin/layouts" # Views resources.view.encoding = "UTF-8" resources.view.basePath = APPLICATION_PATH "/views/" resources.view[] = resources.frontController.moduleDirectory = APPLICATION_PATH "/modules" resources.modules[] = resources.view[] = admin.resources.view[] = [staging : production] [testing : production] phpSettings.display_startup_errors = 1 phpSettings.display_errors = 1 [development : production] phpSettings.display_startup_errors = 1 phpSettings.display_errors = 1 application/Bootstrap.php <?php /** * Ensure all communications are managed by sessions. */ require_once ('Zend/Session.php'); Zend_Session::start(); class Bootstrap extends Zend_Application_Bootstrap_Bootstrap { protected function _initDoctype() { $this->bootstrap( 'view' ); $view = $this->getResource( 'view' ); $view->navigation = array(); $view->subnavigation = array(); $view->headTitle( 'Module One' ); $view->headLink()->appendStylesheet('/css/clear.css'); $view->headLink()->appendStylesheet('/css/main.css'); $view->headScript()->appendFile('/js/jquery.js'); $view->doctype( 'XHTML1_STRICT' ); //$view->navigation = $this->buildMenu(); } /*protected function _initAppAutoLoad() { $autoloader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'default', 'basePath' => APPLICATION_PATH )); return $autoloader; }*/ protected function _initLayoutHelper() { $this->bootstrap('frontController'); $layout = Zend_Controller_Action_HelperBroker::addHelper( new ModuleLayoutLoader()); } public function _initControllers() { $front = Zend_Controller_Front::getInstance(); $front->addModuleDirectory(APPLICATION_PATH . '/modules/admin/', 'admin'); } protected function _initAutoLoadModuleAdmin() { $autoloader = new Zend_Application_module_Autoloader(array( 'namespace' => 'Admin', 'basePath' => APPLICATION_PATH . '/modules/admin' )); return $autoloader; } protected function _initModuleutoload() { $autoloader = new Zend_Application_Module_Autoloader ( array ('namespace' => '', 'basePath' => APPLICATION_PATH ) ); return $autoloader; } } class ModuleLayoutLoader extends Zend_Controller_Action_Helper_Abstract // looks up layout by module in application.ini { public function preDispatch() { $bootstrap = $this->getActionController() ->getInvokeArg('bootstrap'); $config = $bootstrap->getOptions(); echo $module = $this->getRequest()->getModuleName(); /*echo "Configs : <pre>"; print_r($config[$module]);*/ if (isset($config[$module]['resources']['layout']['layout'])) { $layoutScript = $config[$module]['resources']['layout']['layout']; $this->getActionController() ->getHelper('layout') ->setLayout($layoutScript); } } } application/modules/admin/Bootstrap.php <?php class Admin_Bootstrap extends Zend_Application_Module_Bootstrap { /*protected function _initAppAutoload() { $autoloader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'admin', 'basePath' => APPLICATION_PATH . '/modules/admin/' )); return $autoloader; }*/ protected function _initDoctype() { $this->bootstrap( 'view' ); $view = $this->getResource( 'view' ); $view->navigation = array(); $view->subnavigation = array(); $view->headTitle( 'Module One' ); $view->headLink()->appendStylesheet('/css/clear.css'); $view->headLink()->appendStylesheet('/css/main.css'); $view->headScript()->appendFile('/js/jquery.js'); $view->doctype( 'XHTML1_STRICT' ); //$view->navigation = $this->buildMenu(); } } Please go through it and let me know any knows how do configure module and layout in right way.. Thanks and regards, Prasanth P

    Read the article

  • Algorithm design, "randomising" timetable schedule in Python although open to other languages.

    - by S1syphus
    Before I start I should add I am a musician and not a native programmer, this was undertook to make my life easier. Here is the situation, at work I'm given a new csv file each which contains a list of sound files, their length, and the minimum total amount of time they must be played. I create a playlist of exactly 60 minutes, from this excel file. Each sample played the by the minimum number of instances, but spread out from each other; so there will never be a period where for where one sound is played twice in a row or in close proximity to itself. Secondly, if the minimum instances of each song has been used, and there is still time with in the 60 min, it needs to fill the remaining time using sounds till 60 minutes is reached, while adhering to above. The smallest duration possible is 15 seconds, and then multiples of 15 seconds. Here is what I came up with in python and the problems I'm having with it, and as one user said its buggy due to the random library used in it. So I'm guessing a total rethink is on the table, here is where I need your help. Whats is the best way to solve the issue, I have had a brief look at things like knapsack and bin packing algorithms, while both are relevant neither are appropriate and maybe a bit beyond me.

    Read the article

  • How to configurie multiple distinct WCF binding configurations for the same scheme

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • WCF security via message headers

    - by exalted
    I'm trying to implement "some sort of" server-client & zero-config security for some WCF service. The best (as well as easiest to me) solution that I found on www is the one described at http://www.dotnetjack.com/post/Automate-passing-valuable-information-in-WCF-headers.aspx (client-side) and http://www.dotnetjack.com/post/Processing-custom-WCF-header-values-at-server-side.aspx (corrisponding server-side). Below is my implementation for RequestAuth (descibed in the first link above): using System; using System.Diagnostics; using System.ServiceModel; using System.ServiceModel.Configuration; using System.ServiceModel.Dispatcher; using System.ServiceModel.Description; using System.ServiceModel.Channels; namespace AuthLibrary { /// <summary> /// Ref: http://www.dotnetjack.com/post/Automate-passing-valuable-information-in-WCF-headers.aspx /// </summary> public class RequestAuth : BehaviorExtensionElement, IClientMessageInspector, IEndpointBehavior { [DebuggerBrowsable(DebuggerBrowsableState.Never)] private string headerName = "AuthKey"; [DebuggerBrowsable(DebuggerBrowsableState.Never)] private string headerNamespace = "http://some.url"; public override Type BehaviorType { get { return typeof(RequestAuth); } } protected override object CreateBehavior() { return new RequestAuth(); } #region IClientMessageInspector Members // Keeping in mind that I am SENDING something to the server, // I only need to implement the BeforeSendRequest method public void AfterReceiveReply(ref System.ServiceModel.Channels.Message reply, object correlationState) { throw new NotImplementedException(); } public object BeforeSendRequest(ref System.ServiceModel.Channels.Message request, System.ServiceModel.IClientChannel channel) { MessageHeader<string> header = new MessageHeader<string>(); header.Actor = "Anyone"; header.Content = "TopSecretKey"; //Creating an untyped header to add to the WCF context MessageHeader unTypedHeader = header.GetUntypedHeader(headerName, headerNamespace); //Add the header to the current request request.Headers.Add(unTypedHeader); return null; } #endregion #region IEndpointBehavior Members public void AddBindingParameters(ServiceEndpoint endpoint, System.ServiceModel.Channels.BindingParameterCollection bindingParameters) { throw new NotImplementedException(); } public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime) { clientRuntime.MessageInspectors.Add(this); } public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher) { throw new NotImplementedException(); } public void Validate(ServiceEndpoint endpoint) { throw new NotImplementedException(); } #endregion } } So first I put this code in my client WinForms application, but then I had problems signing it, because I had to sign also all third-party references eventhough http://msdn.microsoft.com/en-us/library/h4fa028b(v=VS.80).aspx at section "What Should Not Be Strong-Named" states: In general, you should avoid strong-naming application EXE assemblies. A strongly named application or component cannot reference a weak-named component, so strong-naming an EXE prevents the EXE from referencing weak-named DLLs that are deployed with the application. For this reason, the Visual Studio project system does not strong-name application EXEs. Instead, it strong-names the Application manifest, which internally points to the weak-named application EXE. I expected VS to avoid this problem, but I had no luck there, it complained about all the unsigned references, so I created a separate "WCF Service Library" project inside my solution containing only code above and signed that one. At this point entire solution compiled just okay. And here's my problem: When I fired up "WCF Service Configuration Editor" I was able to add new behavior element extension (say "AuthExtension"), but then when I tried to add that extension to my end point behavior it gives me: Exception has been thrown by the target of an invocation. So I'm stuck here. Any ideas?

    Read the article

  • Visual Basic Cryptography Question

    - by Glenn Sullivan
    I am trying to mimic the results of some C code that uses the OpenSSL library using the system.security.crytography library in the .net 3.5 world, and I can't seem to get it right. I need some help... part of the issue is my understanding of crytography in general. Here's what is supposed to happen: I send a request for authentication to a device. It returns a challenge digest, which I then need to sign with a known key and return The device returns a "success" or "Fail" message. I have the following code snippet that I am trying to "copy": //Seed the PRNG //Cheating here - the PRNG will be seeded when we create a key pair //The key pair is discarded only doing this to seed the PRNG. DSA *temp_dsa = DSA_new(); if(!temp_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } unsigned char seed[20] = "Our Super Secret Key"; temp_dsa = DSA_generate_parameters(128, seed, sizeof(seed), NULL, NULL, NULL, NULL); DSA_free(temp_dsa); //A pointer to the private key. p = (unsigned char *)&priv_key; //Create and allocate a DSA structure from the private key. DSA *priv_dsa = NULL; priv_dsa = d2i_DSAPrivateKey(NULL, &p, sizeof(priv_key)); if(!priv_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } //Allocate memory for the to be computed signature. sigret = OPENSSL_malloc(DSA_size(priv_dsa)); //Sign the challenge digest recieved from the ISC. retval = DSA_sign(0, pResp->data, pResp->data_length, sigret, &siglen, priv_dsa); A few more bits of information: priv_key is a 252 element character array of hex characters that is included. The end result is a 512 (or less) array of characters to send back for validation to the device. Rasmus asked to see the key array. Here it is: unsigned char priv_key[] = {0x30, 0x81, 0xf9, 0x02, 0x01, 0x00, 0x02, 0x41, 0x00, 0xfe, 0xca, 0x97, 0x55, 0x1f, 0xc0, 0xb7, 0x1f, 0xad, 0xf0, 0x93, 0xec, 0x4b, 0x31, 0x94, 0x78, 0x86, 0x82, 0x1b, 0xab, 0xc4, 0x9e, 0x5c, 0x40, 0xd9, 0x89, 0x7d, 0xde, 0x43, 0x38, 0x06, 0x4f, 0x1b, 0x2b, 0xef, 0x5c, 0xb7, 0xff, 0x21, 0xb1, 0x11, 0xe6, 0x9a, 0x81, 0x9a, 0x2b, 0xef, 0x3a, 0xbb, 0x5c, 0xea, 0x76, 0xae, 0x3a, 0x8b, 0x92, 0xd2, 0x7c, 0xf1, 0x89, 0x8e, 0x4d, 0x3f, 0x0d, 0x02, 0x15, 0x00, 0x88, 0x16, 0x1b, 0xf5, 0xda, 0x43, 0xee, 0x4b, 0x58, 0xbb, 0x93, 0xea, 0x4e, 0x2b, 0xda, 0xb9, 0x17, 0xd1, 0xff, 0x21, 0x02, 0x41, 0x00, 0xf6, 0xbb, 0x45, 0xea, 0xda, 0x72, 0x39, 0x4f, 0xc1, 0xdd, 0x02, 0xb4, 0xf3, 0xaa, 0xe5, 0xe2, 0x76, 0xc7, 0xdc, 0x34, 0xb2, 0x0a, 0xd8, 0x69, 0x63, 0xc3, 0x40, 0x2c, 0x58, 0xea, 0xa6, 0xbd, 0x24, 0x8b, 0x6b, 0xaa, 0x4b, 0x41, 0xfc, 0x5f, 0x21, 0x02, 0x3c, 0x27, 0xa9, 0xc7, 0x7a, 0xc8, 0x59, 0xcd, 0x5b, 0xdd, 0x6c, 0x44, 0x48, 0x86, 0xd1, 0x34, 0x46, 0xb0, 0x89, 0x55, 0x50, 0x87, 0x02, 0x41, 0x00, 0x80, 0x29, 0xc6, 0x4a, 0x08, 0x3e, 0x30, 0x54, 0x71, 0x9b, 0x95, 0x49, 0x55, 0x17, 0x70, 0xc7, 0x96, 0x65, 0xc8, 0xc2, 0xe2, 0x8a, 0xe0, 0x5d, 0x9f, 0xe4, 0xb2, 0x1f, 0x20, 0x83, 0x70, 0xbc, 0x88, 0x36, 0x03, 0x29, 0x59, 0xcd, 0xc7, 0xcd, 0xd9, 0x4a, 0xa8, 0x65, 0x24, 0x6a, 0x77, 0x8a, 0x10, 0x88, 0x0d, 0x2f, 0x15, 0x4b, 0xbe, 0xba, 0x13, 0x23, 0xa1, 0x73, 0xa3, 0x04, 0x37, 0xc9, 0x02, 0x14, 0x06, 0x8e, 0xc1, 0x41, 0x40, 0xf1, 0xf6, 0xe1, 0xfa, 0xfb, 0x64, 0x28, 0x02, 0x15, 0xce, 0x47, 0xaa, 0xce, 0x6e, 0xfe}; Can anyone help me translate this code to it's VB.net crypto equivalent? TIA, Glenn

    Read the article

  • How to make sliding button sidebar in Flex

    - by Tam
    Hi, I'm fairly new to Flex. I want to make a button (icon) on the far right in the middle of the page that display a sliding side bar with multiple buttons in it when you hover over it. I want when the user hover out of the button bar it slides back again. Conceptually I got the basics of that to work. The issue I'm having is that when the user moves the mouse between the buttons in the sidebar it kicks in changing state and side bar slides back again. I tried using different types of containers and I got the same results. Any Advice? Thanks, Tam Here is the code: <?xml version="1.0" encoding="utf-8"?> <s:VGroup xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/halo" xmlns:vld ="com.lal.validators.*" xmlns:effect="com.lal.effects.*" width="150" horizontalAlign="right" gap="0"> <fx:Script> <![CDATA[ import com.lal.model.LalModelLocator; var _model:LalModelLocator = LalModelLocator.getInstance(); ]]> </fx:Script> <fx:Declarations> <mx:ArrayCollection id="someData"> </mx:ArrayCollection> </fx:Declarations> <s:states> <s:State name="normal" /> <s:State name="expanded" /> </s:states> <fx:Style source="/styles.css"/> <s:transitions> <s:Transition fromState="normal" toState="expanded" > <s:Sequence> <s:Wipe direction="left" duration="250" target="{buttonsGroup}" /> </s:Sequence> </s:Transition> <s:Transition fromState="expanded" toState="normal" > <s:Sequence> <s:Wipe direction="right" duration="250" target="{buttonsGroup}" /> </s:Sequence> </s:Transition> </s:transitions> <s:Button skinClass="com.lal.skins.CalendarButtonSkin" id="calendarIconButton" includeIn="normal" verticalCenter="0" mouseOver="currentState = 'expanded'"/> <s:Panel includeIn="expanded" id="buttonsGroup" mouseOut="currentState = 'normal' " width="150" height="490" > <s:layout> <s:VerticalLayout gap="0" paddingRight="0" /> </s:layout> <s:Button id="mondayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> <s:Button id="tuesdayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> <s:Button id="wednesdayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> <s:Button id="thursdayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> <s:Button id="fridayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> <s:Button id="saturdayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> <s:Button id="sundayButton" width="120" height="70" mouseOver="currentState = 'expanded'"/> </s:Panel> </s:VGroup>

    Read the article

  • how many types of code signing certificates do I need?

    - by gerryLowry
    in Canada, website SSL certificates can be had for as low as US$10. unfortunately, code signing certificates cost about 10 time as much, one website mentions Vista compatibility ... this seems strange because my assumption is they must support XP, Vista, Windows 7, Server 2003, and Server 2008 or they would be useless. https://secure.ksoftware.net/code_signing.html US$99 Support Platforms Microsoft Authenticode. Sign any Microsoft executable format (32 and 64 bit EXE, DLL, OCX, DLL or any Active X control). Signing hardware drivers is not currently supported. Abode AIR. Sign any Adobe AIR application. Java. Sign any JAR applet Microsoft Office. Sign any MS Office Macro or VBA (Visual Basic for Applications) file. Mozilla. Sign any Mozilla Object file. The implication is that a single code signing certificate can do ALL of the above. ksoftware actually discounts Commodo certificates and the Commode website is unclear. QUESTION: Will ONE code signing certificate be enough or do I need one for Microsoft executables, and a second for things like Word and Excel macros? my main goal is to sign things like vs2008 code snippets so that I can export them securely; however, I would like to be able to use the same code signing certificate for signing other items too. Thank you ~~ regards, Gerry (Lowry)

    Read the article

  • Facebook require_login() in iFrame App

    - by LapKom
    Hi, I have serious problem with iframe application. I need to use many external JS libraries and other dynamic stuuf so FMBL application can't be done. When I call require_login() I get applicaition installing dialog when app is not already installed, which is ok. But then after authorization application enters an endless redirect loop with parameters like auth_token, installed and so. Yesterday I managed to fix this, but today it's broken again... What the heck is happening with FB? It's driving me crazy to find a sollution, none of ones found on net doesn't seem to be working. So far I tried: http://abhirama.wordpress.com/2010/03/07/facebook-iframe-xfbml-app/ (7th march 2010!) http://forum.developers.facebook.com/viewtopic.php?pid=156092 http://www.keywordintellect.com/facebook-development/how-to-set-up-a-facebook-iframe-application-in-php-in-5-minutes/ http://www.markdeepwell.com/2010/02/validating-a-facebook-session-within-an-iframe/ http://forum.developers.facebook.com/viewtopic.php?pid=210449 http://www.ajaxlines.com/ajax/stuff/article/facebook_fbml_rendering_in_iframe_application.php http://www.aratide.com/php/solving-the-break-out-issue-in-iframe-facebook-applications/ None of the above worked... According to those and some FB docs: http://wiki.developers.facebook.com/index.php/FB_RequireFeatures http://wiki.developers.facebook.com/index.php/Cross_Domain_Communication_Channel My example test files look as follow: <?php //Link in library. require_once '../application/vendor/Facebook/facebook.php'; //Authentication Keys $appapikey = 'XXXX'; $appsecret = 'XXXX'; //Construct the class $facebook = new Facebook($appapikey, $appsecret); //Require login $user_id = $facebook->require_login(); ?> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> <head> <title></title> </head> <body> <script src="http://static.ak.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php" type="text/javascript"></script> This is you: <fb:name uid="<?php echo $user_id?>"></fb:name> <?php var_dump($facebook->$this->facebook->api_client->friends_get())?> <script type="text/javascript"> FB_RequireFeatures(["XFBML"], function(){ FB.Facebook.init("<?=$appapikey?>", "xd_receiver.html"); }); </script> </body> </html> And cross-domain file xd_receiver.html is: <!doctype html public "-//w3c//dtd xhtml 1.0 strict//en" "http://www.w3.org/tr/xhtml1/dtd/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title>cross-domain receiver page</title> </head> <body> <script src="http://static.ak.facebook.com/js/api_lib/v0.4/XdCommReceiver.js" type="text/javascript"></script> </body> </html> How do I get it working? I'm using Kohana framework to do this and already replaced header('Location') with url::redirect() in facebook php library.

    Read the article

  • MySQL performance - 100Mb ethernet vs 1Gb ethernet

    - by Rob Penridge
    Hi All I've just started a new job and noticed that the analysts computers are connected to the network at 100Mbps. The ODBC queries we run against the MySQL server can easily return 500MB+ and it seems at times when the servers are under high load the DBAs kill low priority jobs as they are taking too long to run. My question is this... How much of this server time is spent executing the request, and how much time is spent returning the data to the client? Could the query speeds be improved by upgrading the network connections to 1Gbps? (Updated for the why): The database in question was built to accomodate reporting needs and contains massive amounts of data. We usually work with subsets of this data at a granular level in external applications such as SAS or Excel, hence the reason for the large amounts of data being transmitted. The queries are not poorly structured - they are very simple and the appropriate joins/indexes etc are being used. I've removed 'query' from the Title of the post as I realised this question is more to do with general MySQL performance rather than query related performance. I was kind of hoping that someone with a Gigabit connection may be able to actually quantify some results for me here by running a query that returns a decent amount of data, then they could limit their connection speed to 100Mb and rerun the same query. Hopefully this could be done in an environment where loads are reasonably stable so as not to skew the results. If ethernet speed can improve the situation I wanted some quantifiable results to help argue my case for upgrading the network connections. Thanks Rob

    Read the article

< Previous Page | 521 522 523 524 525 526 527 528 529 530 531 532  | Next Page >