single threaded - Page 528

Debugging SIGABRT within NSManagedObjectContext -save:

- by westsider

From inside NSManagedObjectContext -save: I am getting this message: Assertion failed: (_Unwind_SjLj_Resume() can't return), function _Unwind_SjLj_Resume, file /SourceCache/libunwind/libunwind-24.1/src/Unwind-sjlj.c, line 326. Program received signal: “SIGABRT”. warning: Unable to read symbols for /Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.2.1 (8C148)/Symbols/Developer/usr/lib/libXcodeDebuggerSupport.dylib (file not found). This happens when I delete an Experiment object with to-many with Run which has to-many with Sample which has to-one with Data. Experiment also has to-many with Page which has to-many with Display which has to-many to Run. I mention this to point out the cyclical nature of the graph. Here is a simplified graph of model: I had been using Delete Rules but have now switched to "No Action" delete rules in combination with -prepareForDeletion methods for all of these classes. This change made no difference. In both cases, the error message is the same. Interestingly, when I relaunch the app, all the objects that were marked for deletion have been deleted. Also, if an Experiment has no Run objects, then deletion works without incidence. For that matter, deleting a single Run from an Experiment also works. I am hoping that someone has seen something like this and can offer advice on what would cause this. Or, if someone has advice on how to get libXcodeDebuggerSupport.dylib for iOS 4.2.1, that might also be helpful. Update: I followed advice found here and was able to get Xcode to find libXcodeDebuggerSupport.dylib for iOS 4.2.1. But this did not help at all in diagnosing problem - which persists.

Read the article

How to let the user choose between typing price inclusive VAT or exclusive VAT in TextField?

- by Sanoj

I am implementing an back-office application where the user type in prices for products. Sometimes it is preferred to type the price inclusive value-added-tax, VAT and sometimes exclusive VAT. How do I best let the user choose between the inclusive or exclusive VAT in a usability perspective? I could have two TextFields above eachother one inclusive VAT and one exclusive, and reflect the input. But I don't think that reflecting the input in another TextField at realtime is good when it comes to usability, it distracts the user. I could also have two Radiobuttons above the TextField or below, or maybe besides the TextField that let the user make the choice. Or should I have a single button for turning between inclusive/exclusive VAT? like On/Off-buttons. But what text should I have on the button and how should the button be designed? I think this is good because it takes less space and it is easy to have it close to the TextField, but it's very hard to design a good button in a usability perspective. Please give me some recommendations. Maybe someone of you works with usability or have seen a similar problem.

Read the article

Add a background color to text, but with space blank space between lines of paragraph

- by Chris

Hi, I was wondering if something was possible to do in CSS. Basically i want to recreate the text on the RHS of the image using html/css, but currently I'm getting the LHS of the image. The HTML: <div id="banner"> <div id="text"> <p>This is an example of what I have</p> </div> </div> The CSS: div#banner { background: green; width:300px; height:300px;} div#text { margin: 20px auto; } div#text p { background:#fff; padding: 5px; margin: 5px; font-size: 2em; } Now I realise that this can be done already either by: Using an image Using separate p tags (By Point 2 I mean: <div id="banner"> <div id="text"> <p>This is an</p> <p>example of</p> <p>what I have</p> </div> </div> ) But what I would really like to know is if it's actually possible to do what is on the RHS of the image, using only css and a single p tag?

Read the article

Method for finding memory leak in large Java heap dumps

- by Rickard von Essen

I have to find a memory leak in a Java application. I have some experience with this but would like advice on a methodology/strategy for this. Any reference and advice is welcome. About our situation: Heap dumps are larger than 1 GB We have heap dumps from 5 occasions. We don't have any test case to provoke this. It only happens in the (massive) system test environment after at least a weeks usage. The system is built on a internally developed legacy framework with so many design flaws that they are impossible to count them all. Nobody understands the framework in depth. It has been transfered to one guy in India who barely keeps up with answering e-mails. We have done snapshot heap dumps over time and concluded that there is not a single component increasing over time. It is everything that grows slowly. The above points us in the direction that it is the frameworks homegrown ORM system that increases its usage without limits. (This system maps objects to files?! So not really a ORM) Question: What is the methodology that helped you succeed with hunting down leaks in a enterprise scale application?

Read the article

Grails - Simple hasMany Problem - How does 'save' work?

- by gav

My problem is this: I want to create a grails domain instance, defining the 'Many' instances of another domain that it has. I have the actual source in a Google Code Project but the following should illustrate the problem. class Person { String name static hasMany[skills:Skill] static constraints = { id (visible:false) skills (nullable:false, blank:false) } } class Skill { String name String description static constraints = { id (visible:false) name (nullable:false, blank:false) description (nullable:false, blank:false) } } If you use this model and def scaffold for the two Controllers then you end up with a form like this that doesn't work; My own attempt to get this to work enumerates the Skills as checkboxes and looks like this; But when I save the Volunteer the skills are null! This is the code for my save method; def save = { log.info "Saving: " + params.toString() def skills = params.skills log.info "Skills: " + skills def volunteerInstance = new Volunteer(params) log.info volunteerInstance if (volunteerInstance.save(flush: true)) { flash.message = "${message(code: 'default.created.message', args: [message(code: 'volunteer.label', default: 'Volunteer'), volunteerInstance.id])}" redirect(action: "show", id: volunteerInstance.id) log.info volunteerInstance } else { render(view: "create", model: [volunteerInstance: volunteerInstance]) } } This is my log output (I have custom toString() methods); 2010-05-10 21:06:41,494 [http-8080-3] INFO bumbumtrain.VolunteerController - Saving: ["skills":["1", "2"], "name":"Ian", "_skills":["", ""], "create":"Create", "action":"save", "controller":"volunteer"] 2010-05-10 21:06:41,495 [http-8080-3] INFO bumbumtrain.VolunteerController - Skills: [1, 2] 2010-05-10 21:06:41,508 [http-8080-3] INFO bumbumtrain.VolunteerController - Volunteer[ id: null | Name: Ian | Skills [Skill[ id: 1 | Name: Carpenter ] , Skill[ id: 2 | Name: Sound Engineer ] ]] Note that in the final log line the right Skills have been picked up and are part of the object instance. When the volunteer is saved the 'Skills' are ignored and not commited to the database despite the in memory version created clearly does have the items. Is it not possible to pass the Skills at construction time? There must be a way round this? I need a single form to allow a person to register but I want to normalise the data so that I can add more skills at a later time. If you think this should 'just work' then a link to a working example would be great. Hope this makes sense, thanks in advance! Gav

Read the article

Websphere logs report {0} File not found, but application continues to work without issues

- by Eric

A websphere 6.1 server is running a struts application that seems to be working fine. In the logs, however, I'm seeing the following error message, which is being continually emailed to the support staff. com.ibm.ws.webcontainer.webapp.WebAppErrorReport: SRVE0190E: File not found: {0} at com.ibm.ws.webcontainer.webapp.WebAppDispatcherContext.sendError(WebAppDispatcherContext.java:536) at com.ibm.ws.webcontainer.srt.SRTServletResponse.sendError(SRTServletResponse.java:930) at com.ibm.ws.webcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:524) at com.ibm.ws.wswebcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:111) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3129) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:238) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811) at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:93) I can narrow down the issue to a single Action and JSP, which are too big to show here, but here's the action definition in struts-config.xml: <action path="/HappyDefaultThing" name="HappyDefaultThingActionForm" type="com.foo.webadministration.action.HappyDefaultThingAction" validate="true" input="/WaAssignDefaultHappyThing.jsp" scope="session"> <forward name="success" path="/WaAssignDefaultHappyThing.jsp"/> <forward name="failure" path="/WaAssignDefaultHappyThing.jsp"/> </action> As far as I can see, nothing is missing, and everything necessary is being found, but the logs say "File not found: {0}" What is "{0}"?? The stack trace only shows IBMs code, which I can't see the source of, and therefore can't trace. Is this a bug in the websphere code? I'd appreciate any help.

Read the article

Perl strings internals

- by n0rd

How does perl strings represented internally? What encoding is used? How do I handle different encodings properly? I've been using perl for quite a long time, but it didn't include a lot of string handling in different encodings, and when I encountered a minor problem that had something to do with encodings I usually resorted to some shamanic actions. Until this moment I thought about perl strings as sequences of bytes, which did fit pretty well for my tasks. Now I need to do some processing of UTF-8 encoded file and here starts trouble. First, I read file into string like this: open(my $in, '<', $ARGV[0]) or die "cannot open file $ARGV[0] for reading"; binmode($in, ':utf8'); my $contents; { local $/; $contents = <$in>; } close($in); then simply print it: print $contents; And I get two things: a warning Wide character in print at <scriptname> line <n> and a garbage in console. So I can conclude that perl strings have a concept of "character" that can be "wide" or not, but when printed these "wide" characters are represented in console as multiple bytes, not as single "character". (I wonder now why did all my previous experience with binary files worked quite how I expected it to work without any "character" issues). Why then I see garbage in console? If perl stores strings as character in some known encoding, I don't think there is a big problem to find out console encoding and print text properly. (I use Windows, BTW). If perl stores strings as multibyte sequences (e.g. using same UTF-8 encoding), why is it done this way? From my C experience handling multibyte strings is PAIN.

Read the article

events not firing in VisualForce

- by Ben

In the page below,Topic__c is a single-select picklist. My intention is to have this list control which of the input fields is available below. The user selects an option, and the onchange event should fire, and rerender the fields. <apex:inputField value="{!Call_Report__c.Topic__c}" id="topic" > <apex:actionSupport event="onchange" reRender="tickerInput,sectorInput,bondInput"> <apex:param name="topicSelection" value="{!Call_Report__c.Topic__c}" /> </apex:actionSupport> </apex:inputField> <apex:inputField value="{!Call_Report__c.Tickers__c}" rendered="{!Call_Report__c.Topic__c='Issuer'}" id="tickerInput" /> <apex:inputField value="{!Call_Report__c.Sector__c}" rendered="{!Call_Report__c.Topic__c='Industry'}" id="sectorInput"/> <apex:inputField value="{!Call_Report__c.Security__c}" rendered="{!Call_Report__c.Topic__c='Specific Bond'}" id="bondInput" /> Am I doing something obviously wrong here? http://community.salesforce.com/t5/Visualforce-Development/Multi-select-picklist-not-firing-event-for-AJAX-refreshes/m-p/173572/highlight/false#M22119 seems to imply that what I am doing is reasonable...

Read the article

Starting CLI application programmatically does not work depending on arguments

- by Daniel Beck

I try to start plink.exe (PuTTY Link, the command line utility/version of PuTTY) from a C# application to establish an SSH reverse tunnel, but it does no longer work as soon as I pass the correct parameters. What does that mean? The following works as expected: it opens a command line window, displays that I forgot to pass the password for the -pw argument quits, and shows the prompt. I know it got the arguments, since it specifically requests the one thing I did not provide. Uri uri = omitted; ProcessStartInfo info = new ProcessStartInfo(); info.FileName = "cmd"; info.Arguments = "/k \"C:\\Program Files (x86)\\PuTTY\\plink.exe\" -R 3389:" + uri.Host + ":" + uri.Port + " -N -l username -pw"; // TODO pwd Process p = Process.Start(info); I tried the same think with calling plink.exe directly instead of cmd.exe /k, but the window closes immediately, which is unfortunate for bug-hunting. BUT when I pass a password in the arguments, plink.exe displays the program help (showing available parameters) and quits: Uri uri = omitted; ProcessStartInfo info = new ProcessStartInfo(); info.FileName = "cmd"; info.Arguments = "/k \"C:\\Program Files (x86)\\PuTTY\\plink.exe\" -R 3389:" + uri.Host + ":" + uri.Port + " -N -l username -pw secretpassword"; Process p = Process.Start(info); No indication of missing parameters. Both the cmd /k and plink.exe variants do not work (the latter closes immediately, so no information regarding different behaviour). When I launch the application from the Windows 7 Start Menu launcher with the identical parameters, it opens a cmd.exe window and establishes the connection as requested. What's wrong? Is there a way plink.exe notices it's not running in a real shell? If yes, how can I circumvent it, like the Start Menu "prompt" does? I hope this question is right on SO, since it, though specifically for a single application, revolves around launching it successfully programmatically.

Read the article

javasript function

- by user289346

Read the article

Oracle rownum in db2 - Java data archiving

- by HonorGod

I have a data archiving process in java that moves data between db2 and sybase. FYI - This is not done through any import/export process because there are several conditions on each table that are available on run-time and so this process is developed in java. Right now I have single DatabaseReader and DatabaseWriter defined for each source and destination combination so that data is moved in multiple threads. I guess I wanted to expand this further where I can have Multiple DatabaseReaders and Multiple DatabaseWriters defined for each source and destination combination. So, for example if the source data is about 100 rows and I defined 10 readers and 10 writer, each reader will read 10 rows and give them to the writer. I hope process will give me extreme performance depending on the resources available on the server [CPU, Memory etc]. But I guess the problem is these source tables do not have primary keys and it is extremely difficult to grab rows in multiple sets. Oracle provides rownum concept and i guess the life is much simpler there....but how about db2? How can I achieve this behavior with db2? Is there a way to say fetch first 10 records and then fetch next 10 records and so on? Any suggestions / ideas ? Db2 Version - DB2 v8.1.0.144 Fix Pack Num - 16 Linux

Read the article

Is there a better way to create a generic convert string to enum method or enum extension?

- by Kelsey

I have the following methods in an enum helper class (I have simplified it for the purpose of the question): static class EnumHelper { public enum EnumType1 : int { Unknown = 0, Yes = 1, No = 2 } public enum EnumType2 : int { Unknown = 0, Dog = 1, Cat = 2, Bird = 3 } public enum EnumType3 : int { Unknown = 0, iPhone = 1, Andriod = 2, WindowsPhone7 = 3, Palm = 4 } public static EnumType1 ConvertToEnumType1(string value) { return (string.IsNullOrEmpty(value)) ? EnumType1.Unknown : (EnumType1)(Enum.Parse(typeof(EnumType1), value, true)); } public static EnumType2 ConvertToEnumType2(string value) { return (string.IsNullOrEmpty(value)) ? EnumType2.Unknown : (EnumType2)(Enum.Parse(typeof(EnumType2), value, true)); } public static EnumType3 ConvertToEnumType3(string value) { return (string.IsNullOrEmpty(value)) ? EnumType3.Unknown : (EnumType3)(Enum.Parse(typeof(EnumType3), value, true)); } } So the question here is, can I trim this down to an Enum extension method or maybe some type of single method that can handle any type. I have found some examples to do so with basic enums but the difference in my example is all the enums have the Unknown item that I need returned if the string is null or empty (if no match is found I want it to fail). Looking for something like the following maybe: EnumType1 value = EnumType1.Convert("Yes"); // or EnumType1 value = EnumHelper.Convert(EnumType1, "Yes"); One function to do it all... how to handle the Unknown element is the part that I am hung up on.

Read the article

Static Data Structures on Embedded Devices (Android in particular)

- by Mark

I've started working on some Android applications and have a question regarding how people normally deal with situations where you have a static data set and have an application where that data is needed in memory as one of the standard java collections or as an array. In my current specific issue i have a spreadsheet with some pre-calculated data. It consists of ~100 rows and 3 columns. 1 Column is a string, 1 column is a float, 1 column is an integer. I need access to this data as an array in java. It seems like i could: 1) Encode in XML - This would be cpu intensive to decode in my experience. 2) build into SQLite database - seems like a lot of overhead for static access to data i only need array style access to in ram. 3) Build into binary blob and read in. (never done this in java, i miss void *) 4) Build a python script to take the CSV version of my data and spit out a java function that adds the values to my desired structure with hard coded values. 5) Store a string array via androids resource mechanism and compute the other 2 columns on application load. In my case the computation would require a lot of calls to Math.log, Math.pow and Math.floor which i'd rather not have to do for load time and battery usage reasons. I mostly work in low power embedded applications in C and as such #4 is what i'm used to doing in these situations. It just seems like it should be far easier to gain access to static data structures in java/android. Perhaps I'm just being too battery usage conscious and in my single case i imagine the answer is that it doesn't matter much, but if every application took that stance it could begin to matter. What approaches do people usually take in this situation? Anything I missed?

Read the article

MVC and repository pattern data effeciency

- by Shawn Mclean

My project is structured as follows: DAL public IQueryable<Post> GetPosts() { var posts = from p in context.Post select p; return posts; } Service public IList<Post> GetPosts() { var posts = repository.GetPosts().ToList(); return posts; } //Returns a list of the latest feeds, restricted by the count. public IList<PostFeed> GetPostFeeds(int latestCount) { List<Post> post - GetPosts(); //CODE TO CREATE FEEDS HERE return feeds; } Lets say the GetPostFeeds(5) is supposed to return the 5 latest feeds. By going up the list, doesn't it pull down every single post from the database from GetPosts(), just to extract 5 from it? If each post is say 5kb from the database, and there is 1 million records. Wont that be 5GB of ram being used per call to GetPostFeeds()? Is this the way it happens? Should I go back to my DAL and write queries that return only what I need?

Read the article

DB2Command ExecuteNonQuery Insert multiple rows problem

- by DB2 Nubie

I'm attempting to insert multiple rows into a DB2 database using C# code like this: string query = "INSERT INTO TESTDB2.RG_Table (V,E,L,N,Q,B,S,P) values" + "('lkjlkj', 'iouoiu', '2009-03-27 12:01:19', 'nnne', 'sdfdf', NULL, NULL, NULL)," + "('lkjlk2', 'iuoiu2', '2009-03-27 12:01:19', 'nnne2', 'sddf2', NULL, NULL, NULL)"; DB2Command cmd = new DB2Command(query, this.transactionConnection, this.transaction); cmd.ExecuteNonQuery(); If I stop building the query string after the first set of values is included it executes without an error. Attempting to load multiple values using this method results in the following error: Upload error : ERROR [42601] [IBM][DB2] SQL0104N An unexpected token "," was found following "". Expected tokens may include: "". SQLSTATE =42601 The SQL syntax matches that which I have read elsewhere, such as http://stackoverflow.com/questions/452859/inserting-multiple-rows-in-a-single-sql-query and IBM's documentation gives this example: cmd = conn.CreateCommand(); cmd.Transaction = trans; cmd.CommandText = "INSERT INTO company_a VALUES(5275, 'Sanders', 20, 'Mgr', 15, 18357.50), " + "(5265, 'Pernal', 20, 'Sales', NULL, 18171.25), " + "(5791, 'O''Brien', 38, 'Sales', 9, 18006.00)"; cmd.ExecuteNonQuery(); Can anyone explain what could account for this?

Read the article

Will fixed-point arithmetic be worth my trouble?

- by Thomas

I'm working on a fluid dynamics Navier-Stokes solver that should run in real time. Hence, performance is important. Right now, I'm looking at a number of tight loops that each account for a significant fraction of the execution time: there is no single bottleneck. Most of these loops do some floating-point arithmetic, but there's a lot of branching in between. The floating-point operations are mostly limited to additions, subtractions, multiplications, divisions and comparisons. All this is done using 32-bit floats. My target platform is x86 with at least SSE1 instructions. (I've verified in the assembler output that the compiler indeed generates SSE instructions.) Most of the floating-point values that I'm working with have a reasonably small upper bound, and precision for near-zero values isn't very important. So the thought occurred to me: maybe switching to fixed-point arithmetic could speed things up? I know the only way to be really sure is to measure it, that might take days, so I'd like to know the odds of success beforehand. Fixed-point was all the rage back in the days of Doom, but I'm not sure where it stands anno 2010. Considering how much silicon is nowadays pumped into floating-point performance, is there a chance that fixed-point arithmetic will still give me a significant speed boost? Does anyone have any real-world experience that may apply to my situation?

Read the article

How to exclude R*.class files from a proguard build

- by Jeremy Bell

I am one step away from making the method described here: http://stackoverflow.com/questions/2761443/targeting-android-with-scala-2-8-trunk-builds work with a single project (vs one project for scala and one for android). I've come across a problem. Using this input file (arguments to) proguard: -injars bin;lib/scala-library.jar(!META-INF/MANIFEST.MF,!library.properties) -outjar lib/scandroid.jar -libraryjars lib/android.jar -dontwarn -dontoptimize -dontobfuscate -dontskipnonpubliclibraryclasses -dontskipnonpubliclibraryclassmembers -keepattributes Exceptions,InnerClasses,Signature,Deprecated, SourceFile,LineNumberTable,*Annotation*,EnclosingMethod -keep public class org.scala.jeb.** { public protected *; } -keep public class org.xml.sax.EntityResolver { public protected *; } Proguard successfully builds scandroid.jar, however it appears to have included the generated R classes that the android resource builder generates and compiles. In this case, they are located in bin/org/jeb/R*.class. This is not what I want. The android dalvik converter cannot build because it thinks there is a duplicate of the R class (it's in scandroid and also the R*.class files). How can I modify the above proguard arguments to exclude the R*.class files from the scandroid.jar so the dalvik converter is happy? Edit: I should note that I tried adding ;bin/org/jeb/R.class;etc... to the -libraryjars argument, and that only seemed to cause it to complain about duplicate classes, and in addition proguard decided to exclude my scala class files too.

Read the article

Parsing Lisp S-Expressions with known schema in C#

- by Drew Noakes

I'm working with a service that provides data as a Lisp-like S-Expression string. This data is arriving thick and fast, and I want to churn through it as quickly as possible, ideally directly on the byte stream (it's only single-byte characters) without any backtracking. These strings can be quite lengthy and I don't want the GC churn of allocating a string for the whole message. My current implementation uses CoCo/R with a grammar, but it has a few problems. Due to the backtracking, it assigns the whole stream to a string. It's also a bit fiddly for users of my code to change if they have to. I'd rather have a pure C# solution. CoCo/R also does not allow for the reuse of parser/scanner objects, so I have to recreate them for each message. Conceptually the data stream can be thought of as a sequence of S-Expressions: (item 1 apple)(item 2 banana)(item 3 chainsaw) Parsing this sequence would create three objects. The type of each object can be determined by the first value in the list, in the above case "item". The schema/grammar of the incoming stream is well known. Before I start coding I'd like to know if there are libraries out there that do this already. I'm sure I'm not the first person to have this problem.

Read the article

Having Uploadify e-mail a link to download the file

- by kwek-kwek

Uploadify is a jQuery plugin that allows the easy integration of a multiple (or single) file uploads on your website. It requires Flash and any backend development language. An array of options allow for full customization for advanced users, but basic implementation is so easy that even coding novices can do it. I wanted to ask if It is possible to sends out a link of a file that has just been uploaded wioth the e-mail notification of Uploadify. Here is the code for uploadify.php : <?php if (!empty($_FILES)) { $tempFile = $_FILES['Filedata']['tmp_name']; $targetPath = $_SERVER['DOCUMENT_ROOT'] . $_REQUEST['folder'] . '/'; $targetFile = str_replace('//','/',$targetPath) . $_FILES['Filedata']['name']; // $fileTypes = str_replace('*.','',$_REQUEST['fileext']); // $fileTypes = str_replace(';','|',$fileTypes); // $typesArray = split('\|',$fileTypes); // $fileParts = pathinfo($_FILES['Filedata']['name']); // if (in_array($fileParts['extension'],$typesArray)) { // Uncomment the following line if you want to make the directory if it doesn't exist // mkdir(str_replace('//','/',$targetPath), 0755, true); move_uploaded_file($tempFile,$targetFile); echo "1"; // } else { // echo 'Invalid file type.'; // } } //define the receiver of the email $to = '[email protected]'; //define the subject of the email $subject = 'Test email'; //define the message to be sent. Each line should be separated with \n $message = "Hello World!\n\nThis is my first mail."; //define the headers we want passed. Note that they are separated with \r\n $headers = "From: [email protected]\r\nReply-To: [email protected]"; //send the email $mail_sent = @mail( $to, $subject, $message, $headers ); //if the message is sent successfully print "Mail sent". Otherwise print "Mail failed" echo $mail_sent ? "Mail sent" : "Mail failed"; ?>

Read the article

.net MVC RenderPartial renders information that is not in the model

- by Andreas

Hi, I have a usercontrol that is rendering a list of items. Each row contains a unique id in a hidden field, a text and a delete button. When clicking on the delete button I use jquery ajax to call the controller method DeleteCA (seen below). DeleteCA returns a new list of items that replaces the old list. [HttpPost] public PartialViewResult DeleteCA(CAsViewModel CAs, Guid CAIdToDelete) { int indexToRemove = CAs.CAList.IndexOf(CAs.CAList.Single(m => m.Id == CAIdToDelete)); CAs.CAList.RemoveAt(indexToRemove); return PartialView("EditorTemplates/CAs", CAs); } I have checked that DeleteCA is really removing the correct item. The modified list of CAs passed to PartialView no longer contains the deleted item. Something weird happens when the partial view is rendered. The number of items in the list is reduced but it is always the last element that is removed from the list. The rendered items does not correspond to the items in the list/model sent to PartialView. In the usercontrol file (ascx) I'm using both Model.CAList and lambda expression m = m.CAList. How is it possible for the usercontrol to render stuff that is not in the model sent to PartialView? Thanx Andreas

Read the article

sIFR3: controlling a and a:hover styles inside replaced through CSS rather than JS

- by sneeuwitje

For graceful degrading and minimal coding for the sIFR feature on my websites I would want to define styles in CSS as much as possible. Here's what I do: Define a H3 tag to be replaced by sIFR3. H3 comes in varying colors by CSS depending on it's container, say body.blue-txt h3{ color: #009CDA; } body.white-txt h3{ color: #FFFFFF; } body.etc... H3 might contain an anchor (I'm aware of semantical issues, but that's just how it is ... sorry) With setting sIFR.useStyleCheck = true; sIFR3 will show replaced normal H3 text with correct color, but when it contains a link, it shows the Flash default #0000FF .... All fine; I can tweak e.g. blue text in sifr-config.js by using the css-parameter for sIFR.replace(): sIFR.replace(futura, { selector: 'body.blue-txt h3', css: 'a {color: #009CDA; }, a:hover { color: #009CDA; text-decoration: underline; }' }); But that would have to be coded for every single text-color in my sIFR replacements in both JS and CSS. So I would want to make the sIFR.useStyleCheck setting just respect the CSS in sifr-config.css like: body.blue-txt h3{ color: #009CDA; } body.blue-txt h3 a{ color: #009CDA; } body.blue-txt h3 a:hover{ color: #009CDA; text-decoration: underline; } Only this doesn't seem to work ... the link text keeps popping up as #0000FF and the hover is not underlined. Is this just Not A Feature (Yet), or am doing something wrong?

Read the article

Joining on a common table, how do you get a FULL OUTER JOIN to expand on another table?

- by stimpy77

I've scoured StackOverflow and Google for an answer to this problem. I'm trying to create a Microsot SQL Server 2008 view. Not a stored procedure. Not a function. Just a query (i.e. a view). I have three tables. The first table defines a common key, let's say "CompanyID". The other two tables have a sometimes-common field, let's say "EmployeeName". I want a single table result that, when my WHERE clause says "WHERE CompanyID = 12" looks like this: CompanyID | TableA | TableB 12 | John Doe | John Doe 12 | Betty Sue | NULL 12 | NULL | Billy Bob I've tried a FULL OUTER JOIN that looks like this: SELECT Company.CompanyID, TableA.EmployeeName, TableB.EmployeeName FROM Company FULL OUTER JOIN TableA ON Company.CompanyID = TableA.CompanyID FULL OUTER JOIN TableB ON Company.CompanyID = TableB.CompanyID AND (TableA.EmployeeName IS NULL OR TableB.EmployeeName IS NULL OR TableB.EmployeeName = TableA.EmployeeName) I'm only getting the NULL from one matched table, I'm not getting the expansion for the other table. In the above sample, I'm basically only getting the first and third rows and not the second. Can someone help me create this query and show me how this is done correctly? BTW I already have a stored procedure that looks very clean and populates an in-memory table, but that isn't what I want. Thanks.

Read the article

java distributed cache for low latency, high availability

- by Shahbaz

I've never used distributed caches/DHTs like memcached, jboss cache, ehcache, etc. I'm wondering which, if any, is appropriate for my use. First, I'm not doing web applications (as most of these project seem to be geared towards web apps). I write servers (Order Management Systems actually) for financial trading firms. The servers themselves are not too complicated. They need to receive information (market data, orders, executions, etc.) rout them to their destination while possibly transforming some of these messages. I am looking at these products to solve the following problems: * Safe repository of the state of the server. I'd rather build the logic of my application as a bunch of transformers (similar to Apache Camel) and store the state in a 'safe' place * This repository should be distributed: in case one of these data stores crashes, one or two more should be up and I should be able to switch to them seamlessly * This repository should be fast. Single digits milliseconds count here, in other words, systems which consume/process this data are automated systems, not humans clicking on links. This system needs to have high-throughput and low latency. By sending my data outside the process, I am necessarily slowing performance, but I am trying to balance absolute raw speed and absolute protection of data. * This repository should be safe. Similar to the point about several on-line backups, this system needs to write data to disk (potentially more than one disk). I'd really like to stop writing my own 'transaction servers.' Am I correct to be looking into projects such as jboss cache, ehcache, etc.? Thanks

Read the article

Before data is entered, is there a way to make a grouped table graphic placeholder?

- by Matt Winters

I have a grouped table with 3 sections, each section with a title. The 1st and 3rd sections always have only 1 row of information so before any user data is entered, I just put some words like "Enter Data Here..." as placeholder text. This text is edited (replaced) by the user with their own actual data. No problem. The 2nd section however will contain several rows of information entered by user and I'd prefer not to enter placeholder data in row 0, having the user Edit the first row of data then Add subsequent rows. If the numberOfRowsInSection is set to 0, the title for the 3rd section comes close to the title for the 2nd section and it looks ugly. The best that I could come with, and I don't know to do it, is to have a fake graphic placeholder on the striped background (between the 2nd and third titles) that looks like a single row in the 2nd section, put "Enter Data Here..." text in the graphic, and then the first row of actual data entered and all subsequent rows will cover it up. Can anyone tell me how to do this or offer a better suggestion. Thanks.

Read the article

Get id when inserting new row using TableAdapter.Update on a file based database

- by phq

I have a database table with one field, called ID, being an auto increment integer. Using a TableAdapter I can read and modify existing rows as well as create new ones. However if I try to modify a newly inserted row I get an DBConcurrencyException: OleDbConnection conn = new OleDbConnection(@"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Shift.mdb;Persist Security Info=True"); ShiftDataSetTableAdapters.ShiftTableAdapter shiftTA = new ShiftDataSetTableAdapters.ShiftTableAdapter(); shiftTA.Connection = conn; ShiftDataSet.ShiftDataTable table = new ShiftDataSet.ShiftDataTable(); ShiftDataSet.ShiftRow row = table.NewShiftRow(); row.Name = "life"; table.Rows.Add(row); shiftTA.Update(row); // row.ID == -1 row.Name = "answer"; // <-- all fine up to here shiftTA.Update(row); // DBConcurrencyException: 0 rows affected Separate question, is there any static type of the NewShiftRow() method I can use so that I don't have to create table everytime I want to insert a new row. I guess the problem in the code comes from row.ID that is still -1 after the first Update() call. The Insert is successful and in the database the row has a valid value of ID. How can I get that ID so that I can continue with the second Update call? Update: IT looks like this could have been done automatically using this setting. However according to the answer on msdn social, OLEDB drivers do not support this feature. Not sure where to go from here, use something else than oledb? Update: Tried SQLCompact but discovered that it had the same limitation, it does not support multiple statements. Final question: is there any simple(single file based) database that would allow you to get the values of a inserted row.

Search Results

Search found 16914 results on 677 pages for 'single threaded'.

Page 528/677 | < Previous Page | 524 525 526 527 528 529 530 531 532 533 534 535 | Next Page >

- by westsider

- by Sanoj

- by Chris

- by Rickard von Essen

- by gav

- by Eric

- by n0rd

- by Ben

- by Daniel Beck

- by user289346

- by HonorGod

- by Kelsey

- by Mark

- by Shawn Mclean

- by DB2 Nubie

- by Thomas

- by Jeremy Bell

- by Drew Noakes

- by kwek-kwek

- by Andreas

- by sneeuwitje

- by stimpy77

- by Shahbaz

- by Matt Winters

- by phq

< Previous Page | 524 525 526 527 528 529 530 531 532 533 534 535 | Next Page >